Used Wagner Yam Gu2760 Ii for sale (2,159)

Condition: refurbished (used), functionality: fully functional, total width: 2,500 mm, total length: 7,000 mm, total height: 2,600 mm, The following applies to used equipment that undergoes a general overhaul: - New polyamide guide sleeves and sliders - Electrical systems and control elements are completely renewed and brought up to the 2026 technical standard - Complete replacement of hydraulic hose lines in the press and aggregate - Cylinders are reconditioned with new seal kits - Valid UVV/E-Check for 1 year - Steel structure is renewed if necessary Nledpozazirefx Abwed Any special equipment is available upon request. The images shown are sample images of machines that have already been sold. Every inquiry or offer is tailored to the customer and their requirements.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2001, fuel type: gasoline, color: blue, mileage: 8,323 km, operation weight: 319 kg, Equipment: lighting, Snowmobile: - Yamaha - VK 540 III Proaction Plus - 8.3223 Km - 2 cylinder 2-stroke engine (535ccm) - Year of construction 2001 - Lighting system - 2-seater - Automatic (2x forward; 1x reverse) - Luggage rack front and rear - Wind deflector - Year of construction 2001 Nledjq Tp Aqepfx Abwod - 319Kg - 315cm x 113cm x 135cm (lxwxh) - Electric and manual starter

Condition: ready for operation (used), Wagner 752-ST/1 polarity reversing unit / control unit 361912, serial number: 566592A, used, in good condition, 100% functional, scope of delivery as shown in the photos. Njdpfx Absznq R Howeld

Condition: ready for operation (used), Wagner 752-LT/E16 polarity reversal unit / power unit 360068 SN: 566592, used, in good condition, 100% functional, scope of delivery as shown in the photos. Nlodpfx Abjznq Ryowed

Condition: used, Year of construction: 2012, (1) Painting booth, including: SuperCube cabin; Super Centre powder supply unit; 2 vertical traversing systems, VU 012 series; 2 EPG-Sprint X spray guns; Post-filter unit; Monocyclone. Nedpfx Aozncmyebwold

Condition: ready for operation (used), Wagner 752-ST/1 polarity reversing unit / control unit 340659, serial number: 529597, used, in good condition, 100% functional, scope of delivery as shown in the photos. Nlsdszm D Euspfx Abwsd

Condition: new, Wagner 756-EP360/60S polarity reversal unit, serial number: 603464 / 3x400V AC 50/60Hz - 360V DC 60A, unused, 100% functional, scope of delivery as shown in the photos. Nodszm D Ezspfx Abweld

Condition: ready for operation (used), Wagner 752-LT/EP30 polarity reversal unit / power module, part number 350615, serial number: 538236A, used, in good condition, 100% functional, scope of supply as shown in the photos. Nlodpfozm D Enex Abwod

Condition: used, Year of construction: 2007, functionality: fully functional, input voltage: 250 V, We are offering this used Wagner Ecotech-System powder coating system, manufactured in 2007. - Powder coating booth with spray robot. - Donaldson Torit dust extraction system (11 kW). - 75 m automatic conveyor system (disassembled). Nlsdozn Ixnspfx Abwsd

Condition: ready for operation (used), Year of construction: 2010, Immediately available ex location: CNC bed milling machine Wagner Type WBE 1300 R Year of manufacture: 2010 Siemens Sinumerik 810 D Table 1500 x 400 mm Travel X/Y/Z: 1300/500/570 mm SK 40 Automatic tool clamping Drive power 12/9 kW Spindle speeds 60 – 8,000 rpm Electronic handwheel Ball screw Vice Nledpfxoznk E Rs Abwsd Various tool holders Weight 4 t Price: EUR 5,500 plus VAT ex location

Condition: used, Year of construction: 2012, functionality: fully functional, Equipment: documentation/manual, For Sale: WAGNER WDC 560×2000 Lathe – 2012 General Description: Brand: WAGNER (Germany) Model: WDC 560×2000 Year: 2012 Type: High-precision CNC lathe Control: FANUC Oi-TD Applications: Machining of cylindrical, conical, threaded parts and large-sized components for the mechanical engineering, automotive, aerospace, or energy industries. Technical Specifications: • Maximum turning diameter: 560 mm • Maximum distance between centers: 2,000 mm • Center height: approx. 280–300 mm (to be verified per machine) • Cross travel: approx. 550 mm • Spindle: FANUC CNC, variable speed depending on configuration • Tailstock and live center: for machining of long and precise parts • Chuck: 4- or 6-jaw (depending on configuration) Equipment and Features: • FANUC Oi-TD CNC: flexible programming and automatic cycles • Cast-iron guideways for rigidity and precision • Integrated lubrication system and chip tray • Toolholder and modular turret (depending on configuration) • Possible accessories for threading, taper turning or long workpieces Dimensions and Weight: • Machine dimensions: approx. 5.5 × 2 × 2.2 m (L × W × H) • Weight: approx. 7–9 tons Nodpfeyc Ticjx Abwjld Key Highlights: • Large capacity: 560 mm turning diameter × 2,000 mm between centers • Reliable and widely used FANUC CNC, easy for maintenance and programming • Robust and precise machine, suited for demanding workshops

Condition: new, Year of construction: 2026, Pneumatic double-diaphragm pump Cobra 40 -10 Its unique design enables operation with minimal pulsation. Consistent paint flow for a perfect spray pattern and the highest surface quality. Ideally suited for processing materials that are sensitive to shear and moisture. Minimal shear forces – ideal for processing, e.g., UV coatings. Ideal for processing small quantities of material and for frequent color changes. Scope of delivery: Basic unit on a stand, HD double hose 7.5m, upper container 5l Ex, AirCoat pistol AC 4600 Professional including red air cap and holder, Air Coat nozzle ACF 3000 11/40. Technical data: Transmission ratio: 40:1 Volume flow per double stroke: 10 cm3 Volume flow at 200 double strokes: 2 l/min Max. operating pressure: 250 bar Weight: 23 kg Nlodpfx Abjbuqn Hjwed Location: 54634 Bitburg Available at a special price – immediately available.

Condition: excellent (used), Year of construction: 2016, operating hours: 3,000 h, functionality: fully functional, machine/vehicle number: 565697, type of input current: three-phase, input voltage: 400 V, belt width: 600 mm, conveyor belt width: 600 mm, The Wagner non-ferrous metal separator (NE separator), model 0429 from Wagner Magnete, is one of the manufacturer’s high-performance eddy current separators. Working width: 600 mm. • Throughput: depends on the material and grain size. • Rotor speed: up to 3,000 revolutions per minute. • Belt speed: 0.5 to 2.0 m/s. • Weight: 1.2 tons. • Rotor system: Eccentrically mounted with a high pole-changing frequency. Nsdjzl Rfxepfx Abwold • Rotor drive: 4 kW; belt drive: 1.5 kW. The machine and the associated control panel are included in the delivery. The machine was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner’s expense and can be delivered EXW at a port or in the production facility. The details for optimal transport need to be clarified. The machine price is quoted without packaging on a pallet.

Condition: excellent (used), For sale is a professional Thermo Haake C30S Phoenix II laboratory thermostat, designed for precise cooling and heating of liquids and temperature stabilization. The unit can operate as a thermostat bath or a circulator to supply external measurement and research systems. It is equipped with a Phoenix II controller with a clear LCD display, allowing for convenient setting and control of operating parameters. Upon startup, it displays the current temperature and the setpoint value, confirming the correct operation of the controller. Technical data: Manufacturer: Thermo Haake Model: C30S Controller: Phoenix II Controller type: 003-6431 Device type: 003-8195 Power supply: 230 V / 50–60 Hz Current consumption: 9.2 A Refrigerant: R134a Protection rating: IP20 / IP30 RS-232 interface Multi-Port Digital temperature control Connections for external liquid circuit Mobile design with wheels Application: The unit is ideal for: laboratories, quality control, material research, use with laboratory equipment, cooling and heating of measurement systems, temperature stabilization of liquids. Condition: used, functional, controller operates correctly, Nodpfx Abezi Tmaeweld display is clear, normal signs of use, the tank contains beads to reduce medium evaporation, sold exactly as shown in the photos. Included in the set: Thermo Haake C30S thermostat, Phoenix II controller, beads for the thermostat bath, located in the tank.

Condition: like new (used), Year of construction: 2016, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 16P1269203, type of input current: three-phase, operating pressure: 7 bar, pump capacity: 7 l/min, power: 0.06 kW (0.08 HP), Equipment: documentation/manual, MODE OF OPERATION The system is suitable for the proportioning (metering) and mixing of two- or multi-component products. An electronic control system monitors and regulates the specified mixing ratio. The base paint flows continuously, and the control system mixes the necessary amount of hardener (in timed intervals) via a valve. The flow rate of the base paint and hardener is measured with flow meter cells. With plunger pumps, stroke sensors can also be used. The components and cleaning agents are supplied by feed pumps. Color Selection The mixing ratios, pot life, etc., are stored in recipes. The color can be changed by simply switching recipes. Further Features and Applications: For low to medium pressure (32.5 MPa; 325 bar; 4714 psi). 2K COMFORT XL for high pressure (53 MPa; 530 bar; 7687 psi). Modular design – can be configured according to customer requirements. Electronic accuracy in metering ensures consistent quality. Processing of water-based 2K materials is also possible, as all material-contacting parts are suitable for this purpose – for example, made of stainless steel. The fluid component of the Ex version is suitable for use in potentially explosive areas (Zone 1 and 2). Many displays of the functions are language-independent and use simple symbols. Text is displayed in the selected language. Consumption overview for each component and for cleaning agents, VOC documentation. Nlsdpezb I Spefx Abwed Storage of the last 700 error messages with date and time. Safety through continuous monitoring of system parameters, informing the operator when even the smallest malfunctions occur and, if necessary, automatically interrupting production. Protection of parameters by security code. Settings can be saved on a USB stick. Electronic adjustment of the mixing ratio between 0.1:1 and 50:1. Up to 100 work recipes. (Also with robot communication or Profibus.) Possibility of two separate fluid circuits: – for simultaneous operation, – for quick color changes, – or to separate two incompatible 2K materials from each other (e.g., PUR and epoxy paints). Programmable cleaning recipes to save up to 60% of cleaning agents compared to conventional systems. Fully automatic control and monitoring for 1–4 guns. Compatibility with solvent-based and water-based products, as well as selective automatic cleaning with water and/or solvents. Use of manual or automatic atomizers. Release of automatic spray booth, automatic gun cleaning device, etc. Possibility of robot communication.

Condition: used, Year of construction: 2023, Overview This Braumanufaktur Werk II Fillmaster R18 is a compact isobaric rinsing, filling and crown-capping monoblock for glass bottles, built in 2023 by Braumanufaktur Werk II (Großalmerode, Germany). It is sold as a complete craft-scale bottling set for carbonated beverages together with a 750 L fermentation and carbonation tank (SM Inox, 2021) and a 330 L pressure loading tank (SM Inox, 2023). The monoblock combines 6 rinsing stations, 6 isobaric filling valves and 6 crown-capping heads in a single compact unit. CO₂ pre-saturation of the bottles before filling reduces oxygen pickup and product oxidation. Mechanical movements are driven by a pneumatic system (6 - 8 bar); filling parameters, production data and bottle counters are managed via the Siemens SIMATIC HMI touch panel. The line is still installed and under power, and basic functionality can be demonstrated on site. Technical data - Manufacturer: Braumanufaktur Werk II GmbH (Großalmerode, Germany) - Model: Fillmaster R18 - Year of manufacture: 2023 - Machine type: isobaric rinser - filler - crown capper monoblock, glass bottles - Rinsing stations: 6 / filling valves: 6 / capping heads: 6 - Capacity: approx. 500 - 650 bph (semi-automatic, operator-dependent) - Filling system: isobaric, with CO₂ cylinder connection for bottle pre-saturation - Bottle formats: currently set up for 0.375 L glass; adaptable to other crown-cap formats - Crown caps: 26 or 29 mm, all sizes configurable - Control: Siemens SIMATIC HMI touch panel (filling parameters, production data, bottle counter) - Compressed air: 6 - 8 bar - Power: 230 V, 5 A - Dimensions: approx. 870 x 930 x H 1,910 mm Equipment - SM Inox FBTB 750 L PED fermentation and carbonation tank (2021): domed bottom, pressure lid, double insulated jacket with glycol circuit fed by an external heat pump, dedicated control panel for temperature, agitator and CO₂ injection (automatic / manual), carbonation stone fed via solenoid valve; PED Cat. III, approx. Ø 955 mm - SM Inox FCTC 330 L loading tank (2023): pressure lid with CO₂ inlet for pump-free liquid transfer between tanks, approx. Ø 640 mm - Mobile transfer / washing pump on stainless trolley - OEM technical documentation (operating manual, PLC instructions, quick guide) and declarations of conformity Condition Used - very good condition with light use: the PLC production counter reads approx. 58,600 bottles / 12,000 litres in total. Still installed and under power; the sale takes place because the owner has discontinued production. Availability Nlsdpfxeziuazj Abwod Immediately. Location: Italy. Preparation, dismantling and truck loading by the seller (EXW loaded). The machine can be visited and demonstrated on request.

Condition: excellent (used), WSK Intermarking Fritz Wagner Type 1164 – hot stamping / foil gilding machine Nlsdpfeziqtdex Abwed

Year of construction: 2001, condition: excellent (used), JAROMA DFOA II MILLING MACHINES Producer JAROMA Machine model / type DFOA II Year of production 2001 Category of machines. MILLING MACHINES Location Nsdpsh S Uhfjfx Abwjld Gorzów Wlkp. Conditions of delivery PERSONAL COLLECTION Cost of delivery Customer cover Startup type to be agreed Description Remarks JAROMA DFOA edge milling machine In stock - Polish production - Year of production 2001 - unpainted The DFOA-II milling machine is designed to mill the excess veneer to the thickness of the rectilinear or curvilinear element. The veneered side must be perpendicular to the surface, it can also be at an angle of 0-45o or rounded with a radius of R 15-20.

Condition: excellent (used), Year of construction: 2008, x-travel 800 mm y-travel 400 mm z-travel 500 mm Control Siemens table surface area 1270 x 320 mm spindle turning speed - stepless 0 - 6000 U/min distance spindle /table 100 - 600 mm throat 510 mm Nlodpfx Ajymqwxobwod tool taper SK 40 weight of the machine ca. 2,7 t dimensions of the machine ca. 2,2 x 2,0 x 2,5 m

Condition: like new (used), Year of construction: 2023, functionality: fully functional, 4 Wagner TWINCONTROL 2k paint application systems, color spraying systems 2 x low-pressure systems, used only once for testing purposes 2 x Airmix systems, little used, in new condition Each system consists of 3 piston pumps: 1 x for the base component 1 x for the hardener component 1 x for flushing with accessories On request, also available with stainless steel storage tanks with agitator, 2 x new, 2 x demonstration units Can also be purchased separately Ideal for series production and automation EX version, as it operates only with compressed air Purchase or lease takeover possible See also document in the appendix (designations) Price description: Two systems always belong together. One system for priming, one system for painting. 1. Twin Control low-pressure (AirCode), either sales price 59,000 euros or lease takeover 1,530 euros/month + 17,000 euros takeover 2. Twin Control high-pressure (Airmix), either sales price 62,000 euros or lease takeover 1,535 euros/month + 19,000 euros takeover Lease takeover subject to: Agreement from the leasing company 3. Stainless steel storage tanks (2 new) with agitator, sales price 3,200 euros 4. Stainless steel storage tanks (2 used) with agitator, sales price 2,400 euros If the complete package is taken over, the price is negotiable. Nlodpfszk A H Esx Abwed

Condition: good (used), saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade, saw blade copy blade, saw blade copy blade Nljdevzmr Depfx Abwjd -Manufacturer: Wagner, saw blade copy blade Ø 825 x 6 mm -Inside: Ø: 32 mm -Bolt circle: mm -Number of teeth: see photo -Weight: 23 kg

Condition: good (used), saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade, saw blade copy blade, saw blade copy blade -Manufacturer: Wagner, saw blade copy blade Ø 540 x 3 mm Nodpfx Aevzm Acebweld -Inside: Ø: 32 mm -Bolt circle: mm -Number of teeth: 120, see photos -Weight: 5 kg

Condition: good (used), saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade, saw blade copy blade, saw blade copy blade -Manufacturer: Wagner, saw blade copy blade Ø 725 x 6 mm -Inside: Ø: 32 mm Nedevzmwyspfx Abwsld -Bolt circle: mm -Number of teeth: see photos -Weight: 26 kg

Condition: good (used), saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade, saw blade copy blade, saw blade copy blade Njdpfxjvzmx Dj Abweld -Manufacturer: Wagner, saw blade copy blade Ø 560 x 6.5 mm -Inside: Ø: 32 mm -Bolt circle: mm -Number of teeth: 120, see photos -Weight: 12 kg

Condition: good (used), saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade, saw blade copy blade, saw blade copy blade -Manufacturer: Wagner, saw blade copy blade Ø 825 x 6 mm Nsdpfjvzmpcsx Abwold -Inside: Ø: 32 mm -Bolt circle: mm -Number of teeth: see photo -Weight: 23 kg