Used Vecoplan Vhz 1100 S4 Esc for sale (5,789)

Condition: new, Year of construction: 2026, functionality: fully functional, /// DESCRIPTION Csdpfxsyiym Io Ailorh VHZ -ESC drive (E=electronic, S=slip, C=control) is a milestone in drive technology for shredder - energy-efficient, cost-efficient and economic. This drive dispenses with gearbox and fluid coupling, is space-saving in itsdesign and also is extremely low-maintenance and low-noise. Its starting strength even under load is due tointeraction between the high-performance frequency converter and the multi-pole drive motor. The variable speedrange allows to individually parameterize the machine on the particular input material and thus to profit from thehighest efficiency of the drive. One further advantage of the new drive concept is the reliable detection of impurities, that activates an immediateshutdown of the machine. At the same time the rotor is braked, so that it stops quickly to prevent damages asfar as possible. /// TECHNICAL SPECS // Belt Conveyor FB H 500 Centre distance 6500 mm Conveying capacity approx. 0.2 t/hour Conveying speed approx. 0.5 m/sec Width of belt 500 mm Motor power 1.5 kW Operation voltage 400 V Frequency 50 Hz // Plastic shredder VHZ 1100 S4 ESC Intake width 1075 mm Rotor diameter 370 mm Number of cutting tools 54 off Dimensions of cutters 40 x 40 mm nominal speed rotor 180 rpm Rotor speed range 100 – 255 rpm Diameter of screen holes 40 mm Driving side Right hand (standard) Motor power 30 kW Operation voltage 400 V Frequency 50 Hz

Condition: used, Year of construction: 2019, operating hours: 500 h, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, Shredding/chipping machine Vecoplan VHZ 1300, hammer mills CPM, fan and cyclone filter JFK. The machine is in good condition and has only been in operation for approximately 500 hours. The line is complete with all conveyors. Credjympx Uepfx Ailjh

Condition: as good as new (ex-display), Year of construction: 2020, operating hours: 5 h, functionality: fully functional, machine/vehicle number: 17080-010, Single-shaft shredder. Rotor diameter 370 mm. Drive power 37 kW. Suitable for processing all types of materials, including paper, wood, and plastics. Csdpfx Aijz Aif Sslerh

Condition: good (used), Year of construction: 2017, ESC Screen Printing System 1100-2C/IR with IR Dryer Manufacturer: ESC – Europa-Siebdruck-Centrum GmbH & Co. KG Model designation according to nameplates: PAJD 1100-2C/IR and Perfection 1100 2C/IR Year of manufacture according to nameplates: 2016 and 2017 Machine/Factory numbers: 9960-14-1065 / 11661 Csdpfoyrm Hyex Ailjrh Electrical connection: 400 V, 50 Hz Rated current: 120 A (nameplate PAJD) Rated power: 76 kW (nameplate Perfection) Protection class: IP40 Belt type: IR temperature tunnel with conveyor belt (width as per series: 1100 mm) Assembly: IR drying unit for screen printing or coating processes Design: Enclosed safety housing with access doors Application area: Drying/cure of printed or coated components Location: Schierling Inspection possible by appointment.

Year of construction: 1999, condition: excellent (used), WIDE BELT GRINDER, 2 UNITS: CONTACT CYLINDER AND GRINDING WHEEL CYLINDER, HORIZONTAL GRINDER, CONTACT CYLINDER MOTOR 15 kW, GRINDING WHEEL CYLINDER MOTOR 7.5 kW, CONTINUOUSLY VARIABLE FEED RATE CONTROL. Csdpsgrdx Usfx Ailsrh

Condition: good (used), Year of construction: 2008, ECS High Press Year: 2008⁠ ⁠ Max format: 720 x 1020 mm Min format: 350 x 560 mm Gripper : 10 mm Max frame size : 1140 x 1280 mm Adjustment angle: 30 Screen fine adjustment : /- 10 mm Max speed : 3300 sh/h. Main power supply: 10KW without YV dryer . Credpfjttzwmsx Ailjh Weight: 5500 Kg ECS UV dryer with 2 lamps - year 2002

Year of construction: 2023, condition: ready for operation (used), Two Vecoplan scraper chain conveyors are available. 1) VKU 800, year of construction: 2023, drive power: 5.5kW, belt speed: 24m/min, conveying capacity: approx. 120m³/h, belt width: 820mm, max. incline: 70°, section length: 10.2m. 2) VKU 1100, year of construction: 2023, drive power: 11kW, belt speed: 24m/min, conveying capacity: 180m³/h, belt width: 1150mm, max. incline: 70°, section length: 22mm. Documentation available. On-site inspection is possible. Codpfjt Iw Ryox Ailorh

Condition: used, Year of construction: 2013, operating hours: 3,500 h, machine/vehicle number: 13620, rotor diameter: 395 mm, rotor width: 1,300 mm, input voltage: 400 V, number of blades: 60, rotational speed (max.): 129 rpm, power: 55 kW (74.78 HP), We sell the shredder as a set including a pit conveyor, shredder, and discharge conveyor. Credpfjzmzduox Ailjh The Vecoplan universal shredder – VAZ – can be used for a variety of materials – waste shredding, plastic shredding, wood shredding, etc. The machine, with a power output of 55 kW, is equipped with 60 cutting heads measuring 60x60 mm. A turbo coupling facilitates the start-up process, allowing the machine to be started even with a full hopper. The hopper is made of stainless steel, and the extraction hood is made of galvanized sheet metal. The machine, including the control panel, is offered for sale. The hopper and extraction hood are included. Spare parts are included in the price of the shredder. The machine was in operation at an R&D center in Israel. Now that the company is operating a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered ex-works at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price does not include packaging for pallet transport.

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, total length: 5,450 mm, total width: 2,700 mm, total height: 2,300 mm, overall weight: 22,500 kg, rotor diameter: 640 mm, rotational speed (max.): 165 rpm, rotor width: 2,000 mm, input voltage: 400 V, year of last overhaul: 2026, Vecoplan VNZ 200 - Two-shaft shredder 2 rotors, each with a length of 2,000 mm Rotor diameter: 640 mm each 48 cutting tips, 80x80 mm, X-Cut per rotor 2 drive motors, each with 132 kW Rotor speed: approx. 165 rpm Control cabinet as a freestanding cabinet Weight: approx. 22.5 t The machine is equipped with a pneumatically pre-tensioned counter-knife crossbar, which can be lowered for maintenance work and to remove foreign objects. In addition, this protects the machine from major damage when foreign objects enter. The large, hydraulically pivoting and locking maintenance doors on both sides further simplify maintenance work and the removal of foreign objects. Possible areas of application: Re-shredding of pre-broken waste or residual wood, as well as pre-shredded household, commercial, or industrial waste, packaging materials, production residues, and much more. Depending on the size, the materials can also be fed into the machine without prior pre-shredding. The machine has been completely overhauled. The following overhauls were carried out: - Rotor bearings renewed - Wear surfaces refurbished - Rotor tool holders re-armored - new hydraulic hoses and new motor for hydraulic unit - Pneumatic piping and valves renewed - Rotors fitted with new cutting tips, and new counter-knives installed Crjdjzdf Ruopfx Ailoh - new drive belts - Screens will be newly manufactured according to the required grain size - Complete new paint job - Control cabinet overhauled and new star-delta starter circuit installed Additional spare parts package includes: - two overhauled gearboxes - overhauled drive motor - new turbo coupling

Condition: ready for operation (used), Year of construction: 2008, operating hours: 11,655 h, functionality: fully functional, machine/vehicle number: 11421, COMPLETE CONFIDENTIAL DOCUMENTS SHREDDING & BALLING PLANT Built by: - sorting table - infeed belt conveyor 8000x1000 mm; including infeed belt conveyor - VECOPLAN shredder VAZ1300MK; includes screen according to actual confidential shredding DIN norm - Outfeed combined screw and chain conveyor, conveying to the press baler - press baler IMABE H-80/50 - Dust exhaust & filtering system - Electrical cabinet for fully authomatic operation Includes: - Full internal cabling Credpjzhu Atefx Ailsh - Machines revised with new wear parts for the shredder - Dismantled - Loading into trucks

Condition: like new (used), Year of construction: 2017, operating hours: 20 h, functionality: fully functional, power: 55 kW (74.78 HP), Vecoplan Shredding Unit – Efficient Processing of Wood Waste The Vecoplan shredding unit is a powerful complete solution for the continuous processing of wood waste, cut-offs, strips, boards, and other wood residues into high-quality wood chips. The coordinated components ensure a consistent material flow, reliable continuous operation, and high economic efficiency. Components of the system: Vecoplan VTH 65/25/5/U Industrial Shredder (year of construction 2017) The VTH 65/25/5/U is a robust industrial shredder for continuous use in the wood industry. With its inlet opening of 650 × 250 mm and a drive power of 55 kW, it reliably and energy-efficiently processes a wide variety of wood residues. Depending on the material properties, the machine achieves a throughput of 1 to 5 tons per hour. The VTH series is characterized by high throughput rates, a robust design, and low maintenance requirements. Vecoplan VR 65/24 Vibrating Table Crsdpfxezh Ti Es Ailjh The vibrating table with a usable area of 650 × 2,500 mm ensures a uniform material distribution and continuous feeding of the shredder. This avoids peak loads, optimizes system performance, and ensures a smooth production process. Vecoplan KKF 500-1K-U Scraper Conveyor The downstream scraper conveyor with a conveying width of 500 mm reliably transports the shredded material for further processing or storage. It is ideal for transporting wood chips, sawdust, wood shavings, and pellets and impresses with its robust industrial design. Advantages of the system Complete, perfectly coordinated Vecoplan system Consistent material feed through vibrating table High throughput of up to 5 t/h Robust industrial design for continuous operation Low maintenance requirements Ideal for sawmills, wood processing companies, biomass plants, and pellet production Immediately ready for use for the economical processing of wood waste.

Condition: excellent (used), Vecoplan chipper for saw cuts Hacker 55/26/2 - German production - reverse - for the production of technological chips - a powerful shaft with a diameter of 650 mm TECHNICAL PARAMETERS: - 550 mm slot width - inlet height 260 mm - two knives - engine power 110 kW - conveyor belt length 5000 mm - 50 x 50 mm sieve - three upper pulling toothed shafts - four lower pulling toothed shafts - rotor width 650 mm - rotor diameter 650 mm - hydraulic lifting of the feed rollers - feeder height from the base 1100 mm Cedpfxsihpg Es Ailjrh Transport dimensions 1100x245x240 cm weight about 10 t

Condition: excellent (used), CATALOGUE NUMBER: 6145 TECHNICAL DATA - max. width of the workpiece: 1100mm - max. height of the workpiece: 140mm 3 units: 1) grooved rubber roller for calibrating, 15kW 2) grooved rubber roller for calibrating, 11kW 3) grooved rubber roller for calibrating, 11kW Top: - sliding metal roller - sliding rubber roller - unit - 2 sliding rubber rollers - unit - 2 sliding rubber rollers - unit - sliding rubber roller Bottom: - feeding table, 3600x1000mm - feed speed adjustable via frequency inverter, 0.25kW - conveyor belt - 3 sliding rubber rollers, guiding - pneumatic belt oscillation with photoelectric sensors - belt blowing - electric table lifting - lifting motor 0.75kW - stepless feed speed adjustment - feed motor 2.2kW - with vacuum pump - pump motor 4kW - extraction nozzle diameter 110mm, 80mm - working pressure 6-8 bar - extraction nozzle diameter 3x150, 3x200mm - overall machine dimensions (L/W/H): 3400x2300x2800mm - feeder dimensions (L/W/H): 3000x1300x900mm - pump dimensions (L/W/H): 600x950x940mm - weight approx. 5000kg Net price: 32900 PLN Codpfxezw Dtms Ailorh Net price: 7833 EUR, depending on the exchange rate of 4.2 EUR (Prices are subject to change due to significant fluctuations)

Condition: used, Year of construction: 2008, Format: 300 x 450 mm Equipment: max. screen frame size 500 x 750 mm table height 945 + 30 mm screen lift height 300 mm max. printing speed 100 - 500 mm/sec. max. cycling speed 800 p/h mains supply 220, 50/60 V / Hz working pressure 5 - 7 bar dimensions (LxWxH) 920 x 750 x 1710 mm weight approx. 245 kg Cedpfxeyzrupo Ailsrh

Condition: good (used), Fully automatic band saw from Imet Type BS 400 60 AFi-NC Year of manufacture 2013 Capacity ø 310mm Single-sided miter cut max. 60 degrees Material selector switch Cjdpfx Aiszz Rpijljrh

Condition: used, Year of construction: 2002, functionality: fully functional, – German-made – Year of manufacture: 2002 TECHNICAL SPECIFICATIONS: – Feed opening (length / width): 1000 / 800 mm Codpfxew Ip R Ts Ailjrh – Rotor diameter: 200 mm – Rotor length: 800 mm – Main motor: 11 kW – Hydraulic pump motor: 1.1 kW – Number of knives: 19 pcs – Reversible cutting knives: 40 mm x 40 mm, serrated – Screen: Ø 20 and 25 mm – AUTOREVERSE – HYDRAULIC DRAWER – Clamp drawer height: 140 mm – Extraction outlet diameter: Ø 200 mm – Dimensions (L/W/H): 230 / 160 / 215 cm – Weight: ~1650 kg

Condition: ready for operation (used), Year of construction: 2017, A Systec/ESC 2-color flatbed screen printing system is available. Processes: unwind unit, printing unit 1, intermediate module, printing unit 2, rewind unit. Unwind unit: Systec, intermediate module: Systec, rewind unit: Systec, printing units 1/2: ESC. Max. print format: 300mm/450mm, vacuum table dimensions X/Y: 400mm/600mm, vacuum surface dimensions X/Y: 345mm/465mm, max. frame dimensions X/Y: 500mm/750mm, print material thickness range: 0mm-50mm, working height: 945mm, printing speed: 500mm/s, max. cycle rate: 800pcs/h, fine adjustment: +/-10mm, squeegee angle adjustment: +/-9°, unwind roll diameter: 600mm, unwind roll spindle diameter: 3in, vacuum boxes: 3. Machine dimensions X/Y/Z: approx. 7900mm/1400mm/1950mm. Documentation available. An on-site inspection is possible. Credpozmymhefx Aileh

Condition: excellent (used), functionality: fully functional, hopper Crsdpozzpmysfx Ailsh hydraulically operated clamping jaw year of manufacture: 2006 control panel operation engine power: 15 kW

Condition: good (used), Year of construction: 2007, fuel type: diesel, GENIE S-45 Telescopic boom lift / articulating boom lift, 4x4, DEUTZ DIESEL, 15.7m working height, 2007 A video can be sent via WhatsApp. We have a continuous stock; please visit our website. Prices are quoted ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are at trade prices and in AS-IS condition without guarantees (see our general terms and conditions). You can make an appointment for a viewing and/or test drive without obligation. Please call in advance as we are not always on-site. Van de Wert Trading B.V. Bedrijfsstraat 3 Credpszfixqjfx Ailsh 5391 LR Nuland

Condition: refurbished (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 012016, overall weight: 4,000 kg, rotor diameter: 370 mm, number of blades: 30, total length: 3,075 mm, total height: 1,500 mm, rotor length: 1,300 mm, rotor width: 370 mm, power: 22 kW (29.91 HP), rotational speed (max.): 120 rpm, hopper volume: 3,000 l, year of last overhaul: 2019, sieve perforation: 30 mm, warranty duration: 12 months, input voltage: 400 V, blade width: 40 mm, Intake length: 1450 mm Intake width & rotor length: 1300 mm ᴓ rotor: 370 mm nº of cutters: 30 un (40x40 mm) Rotor speed: 118 rpm Motor: 22 kW Voltage: 400 V Cedpfszguw Iex Ailsrh Frequency: 50 Hz ᴓ screen: 30 mm Machine weight: 4000 kg Machine fully refurbished (as new) and ready to operate SCOPE OF SUPPLY INCLUDES: - 500 mm high steel frame - 1000 mm infeed hopper - 2500 mm long evacuation belt conveyor including magnetic drum - Electric control pannel - Internal electric cabling between the electric control pannel and the shredder

Condition: used, Year of construction: 1991, functionality: fully functional, working width: 1,100 mm, grinding width: 1,100 mm, overall weight: 3,400 kg, height adjustment type: electric, OTT Omega 1100 (year of manufacture 1991) Crsdjz Dpxlspfx Ailsh Dimensions and weight: Footprint / installation dimensions (L x W x H): approx. 2700 x 2100 x 2200 mm Weight: approx. 3400 kg Extraction: 3 extraction ports

Condition: reconditioned (used), Year of construction: 1995, operating hours: 18,000 h, functionality: fully functional, overall weight: 7,500 kg, rotor diameter: 370 mm, number of blades: 71, rotor length: 2,500 mm, power: 75 kW (101.97 HP), rotational speed (max.): 130 rpm, filling opening width: 1,450 mm, filling opening length: 2,500 mm, year of last overhaul: 2026, warranty duration: 12 months, input voltage: 400 V, blade width: 40 mm, Intake length: 1450 mm Intake width & rotor length: 2500 mm ᴓ rotor: 370 mm nº of cutters: 71 un (40x40 mm) Rotor speed: 118 rpm Motor: 75 kW Voltage: 400 V Frequency: 50 Hz ᴓ screen: 30 mm Cjdpforrhczsx Ailsrh Machine weight: 9000 kg Machine in operation

Condition: ready for operation (used), Year of construction: 1988, functionality: fully functional, Shredder, granulator, Csdpsz Aaq Eefx Ailerh for beech wood waste, cardboard, paper waste, pallets Manufacturer: Vecoplan Type: VAZ 145/135 Year of manufacture: 1988 Motor: 22 kW with sliding plate Infeed width: 1305 mm Infeed length: 1450 mm Rotor diameter: 370 mm Number of tools: 22 Rotor speed: 83 rpm Feed rate: 300-500 kg/hour

Condition: good (used), Year of construction: 2014, operating hours: 5,532 h, fuel type: diesel, GENIE S-45 Telescopic boom lift / articulating boom lift, 4x4, DEUTZ DIESEL, 5532 hours, 15.7m working height, 2014. A video can be sent via WhatsApp. We have a continuous stock; please see our website. Prices are quoted ex works Nuland. Van de Wert Trading B.V. has a varying stock of machinery, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without guarantees (see our general terms and conditions). You can make a non-binding appointment for an inspection and/or test drive. Please call in advance, as we are not always on-site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland Csdpfozxq R Ijx Ailorh

Condition: used, functionality: fully functional, spindle bore: 165 mm, For sale: heavy-duty CNC lathe XYZ SL 1100 / 1500 mm in very good condition. The machine was purchased in 2019 and is ideal for machining large and heavy workpieces in single-piece and small-batch production. Technical specifications Manufacturer: XYZ Machine Tools Model: SL 1100 / 1500 mm Year of manufacture: 2019 Crjdpfjzba N Hjx Aileh Control system: Siemens ShopTurn / Siemens CNC 840D Centre distance: 1,500 mm Maximum swing over bed: 1,100 mm Spindle bore: 165 mm Main drive: 70 kW Speed range: up to 660 rpm Bed width: 558 mm Tailstock fitted Automatic central lubrication Coolant system Full enclosure Heavy-duty cast iron machine bed Electric tailstock Large chuck Solid heavy-duty lathe design Safety enclosure Coolant system Work area lighting Applications: The XYZ XL/SL series has been specially developed for machining large and heavy workpieces. The solid cast iron construction, high spindle power and large spindle bore enable the cost-effective machining of: Shafts Flanges Rollers Hydraulic components Machine components Steel and cast components The series is designed for workpiece weights of several tonnes and ranks among the heavy-duty industrial machine tools in its class. Condition The machine is in good condition No visible damage Viewing available by appointment Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, please feel free to contact us directly.