Used Veb Gr2Hvx-40/290-P for sale (57,141)

Condition: good (used), Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: VEB, side channel vacuum pump side channel compressor -Type: GR2HVX-40/290-P -Drive: VEM 1.5 kW 2840 rpm -technical data: see photo type plate -Dimensions: 400/330/H430mm -Weight: 32 kg/piece Godpsun Dvijfx An Rjit

Condition: refurbished (used), battery capacity: 620 Ah, battery voltage: 80 V, total height: 784 mm, total length: 1,025 mm, total width: 708 mm, Tested forklift battery for your truck – 80V 4PZS 620Ah – DIN A + 1-year warranty + Complete with aquamatic system + Includes end discharge device & REMA 320 connector (other plug types can be installed upon request) + Capacity: minimum 90–100% (C5 capacity protocol is provided with delivery) + Year of manufacture: 2024 Dimensions: Length: 1,500 mm Width: 708 mm Height: 784 mm Weight: approx. 1,600 kg Suitable for the following models and more: Linde E 20 - 325-00 Linde E 20 / 600 - 387-00 Linde E 20 / 600 H - 1252-01 Linde E 20 / 600 H - 387-00 Linde E 20 / 600 RH - 387-00 Linde E 20 H - 387-00 Linde E 20 HOCH - 325-00 Linde E 20 HOCH - 336-00 Linde E 20 P - 325-00 Linde E 20 Z - 325-00 Linde E 25 - 325-00 Linde E 25 - 336-00 Linde E 25 - 387-00 Linde E 25 / 600 - 387-00 Linde E 25 / 600 H - 1252-01 Linde E 25 / 600 H - 387-00 Linde E 25 / 600 RH - 387-00 Linde E 25 CH - 387-00 Linde E 25 H - 387-00 Linde E 30 CH - 387-00 Linde E 30 H - 387-00 Linde E 30 P - 325-00 Linde E 30 SH - 1276-00 Linde E 35 - 337-00 Linde E 35 - 337- Linde E 35 P - 337-00 Linde E 40 P - 337-00 Linde K - 5231-00 Linde K - 5231-00 – side battery change Linde K 12 - Linde K 15 - Linde P 200 - 370-00 Linde P 250 - 127-00 – vertical battery change Linde P 250 S - 127-05 Linde P 250 SWB - 5007-10 – side battery change Linde P 250 SWB - 5007-10 – vertical battery change Still MX-X Still R. 07-25 Still R 60-20 Still R 60-22 Still R 60-25 Still RX 60-25 Still RX 60-30 Jungheinrich EFG 25 Jungheinrich EFG 425 Jungheinrich EFG 425 K Jungheinrich EFG V 25 Jungheinrich EKX 515 Jungheinrich EKX 515 K Jungheinrich EKX 525 K Jungheinrich ETX Toyota 7FBMF20 Toyota 7FBMF25 Toyota 8FBMKT25 Toyota 8FBMKT30 Toyota FBM25 Toyota FBMF20 Toyota FBMF25 Crown TSP 6000 - B Crown TSP 6000 - C Crown TSP 7000 Gjdpfx Asy Rnrijn Roit Atlet EH 25 Balkancar EV715 Balkancar EV720 Clark GEX25 Heli CPD 30 Heli CPD 35 Hubtex MQ 40 Hyster E5XN Hyster J2.0 Hyundai 25BHA7 Mitsubishi FB25CN Nissan 1Q2L25Q Nissan QX25 Common battery sizes available on request. Transport available.

Condition: used, Druck- und Vakuumkompressor - Pressure and Vacuum Pump Rietschle VEB GR2HVXSN. MA24F165L2 Gsdpfx Anjiwu Eto Rsit Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1988, functionality: fully functional, Gear Grinding Machine VEB ZSTZ 630 C 3 P – 1988, Ready to Operate Description: For sale: gear grinding machine from the German manufacturer VEB Werkzeugmaschinenkombinat, model ZSTZ 630 C 3 P, year of manufacture 1988. The machine is in good technical condition, available immediately, and ready for inspection. Currently connected to power, allowing immediate testing of its operation. Ideal for workshops specializing in precise gear machining and industrial machine repair. Specifications: Manufacturer: VEB Werkzeugmaschinenkombinat Model: ZSTZ 630 C 3 P Year of manufacture: 1988 Condition: good technical condition Gjdpfx Aeyfq E Hsn Roit Availability: immediate Ready for inspection, connected to power Contact: Please contact us for inspection arrangements or further information.

Condition: used, Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve -Gate valve: MAW type NW 40/32 ND 40 -Valve drive: Leibfried type LDA 309-1 pneumatic Gijdpfof Ek Igjx An Ret -Nominal pressure: 7 bar -Connection: inside Ø 40 mm -Dimensions: 375/150/H195 mm -Weight: 14 kg

Condition: used, Tool holder, milling holder, collet holder, collet chuck, chuck, milling tool, adapter, clamping unit, tool holder, -Manufacturer: VEB GWB Wiesa, milling chuck SK40 -Type: B 40/40 -Number: 5x milling holder available -Price per piece -Dimensions: Ø90 x 170 mm -Weight: 1.9 kg/pc. Gsdpfx Anstff Ane Reit

Condition: new, Rexroth CSHXMP5/…/ 50/..355A11/B1HXUXD6316 MNR: R901130316 for EMAG, unused with storage marks, 100% functional, scope of delivery as per photos Gedpfx Ansulqiws Rsit

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, machine/vehicle number: 92568/331430, workpiece weight (max.): 500 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 200 mm, No reserve price – guaranteed sale to the highest bidder! Gjdpfx Anjyr Nkns Reit Submitting a bid obligates the buyer to collect the item within the specified period, between 04/05/26 and 07/05/26. TECHNICAL DETAILS X-axis travel: 400 mm Y-axis travel: 250 mm Z-axis travel: 200 mm U-axis travel: 400 mm V-axis travel: 250 mm Taper angle/height: ±30°/200 mm Max. workpiece dimensions: 850 mm x 500 mm x 200 mm Max. workpiece weight: 500 kg Table dimensions: 720 mm x 500 mm Distance floor to table: 1,000 mm MACHINE DETAILS Control: CHARMILLES Operating voltage: 380 V Frequency: 50 Hz Rated current: 15 A Connected load: 10 kVA Dimensions & Weight Dimensions (L x W x H): 2,400 x 2,200 x 2,100 mm Door width: 900 mm Weight: 2,500 kg External reference: 59

Condition: new, Year of construction: 2026, neu 2026 070125 prompt, Zwischenverkauf v Türkei 40200 € 767.82 € 1 40 to 2.5 mm 450 mm 650 mm 150 mm 1 - 80 mm 125 1/min 4 75 mm 40 mm 225 mm 300 mm 835 mm 4 kW 1350 mm 1370 mm 2330 mm 2100 kg Welded steel frame construction 4-fold ram guide Pneumatic clutch-brake combination Protective enclosure with light barriers and side doors Mechanical overload protection Two-hand and foot pedal operation Manual stroke adjustment Manual rammer adjustment Variable stroke rate via frequency converter Operating modes: * Adjustment mode * Two-hand release * Foot release * 2-stroke operation via light barriers * Continuous operation Giedpfx Aswiqvzjn Rst Touchscreen for * Stroke counter with preselection for continuous operation * Stroke rate adjustment * Lubrication intervals and duration * Alarm messages * Motor direction of rotation * Monitoring of inputs and outputs 2 free cams for connecting peripherals Automatic central lubrication Equipment in accordance with CE regulations OPTION: Vibration pads € 192,-- Bolster plate € 830,--

Condition: excellent (used), Year of construction: 2011, Travel X 620 mm Gisdpfxswnbrds An Rjt Travel Y 420 mm Travel Z 400 mm Table size 800 x 400 mm Mounting ISO 40 (DIN 69871A) Distance between table and spindle nose 500 Spindle speeds 4000/8000 rpm Quill stroke: 80 mm Ball screws on all axes Rapid traverse X,Y,Z 5,5,4 (m/min) Power KW 10.5 (13.7) Tool clamping: Hydraulic Dimensions LxWxH 2,000x2,760x2,050 Weight approx. 1900 kg

Condition: used, Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo, compact cylinder type ADVU-40-20-A-P-A -Stroke: 20 mm -Piston: Ø 40 mm -Piston rod: Ø 12 mm / M10 x 1,25 -Dimension: 94/60/H60 mm Gsdpfx Anjiiwgfj Rjit -Weight 0.6 kg.

Condition: good (used), Guide cylinder, guide pneumatic cylinder, pneumatic cylinder, compact cylinder -Manufacturer: Festo, guide cylinder type DFM-20-40-PA-GF 170843 Gjdpfx Aoqv Hp Aon Rsit -Piston: Ø 20 mm -Stroke: 40mm -Sliding guide -Quantity: 3x cylinders available -Price per piece -Dimension: 120/80/H60 mm -Weight: 1.1 kg/pc.

Condition: good (used), Pneumatic cylinder, air cylinder, pneumatic piston, air piston Godob A S D Djpfx An Reit -Type: DZF-40-125-APA-S2 -Air inlet and outlet: adjustable -Weight: 1.3 kg

Condition: used, Guide cylinder, guide pneumatic cylinder, pneumatic cylinder, compact cylinder -Handover: in current condition as seen -Printing plate: missing, see photos -Manufacturer: Festo, guide cylinder without pressure plate -Type DFM-20-40-PA-GF 170843 -Piston: Ø 20 mm -Stroke: 40 mm -Piston rod: Ø 10 mm / M 10 x 1.25 -Sliding guide -Dimension: 95/83/H57 mm Godsqv Hqrjpfx An Reit -Weight: 0.6 kg

Condition: like new (used), Year of construction: 2022, operating hours: 1 h, functionality: fully functional, total length: 5,595 mm, total height: 2,031 mm, total width: 680 mm, delivery head: 1,550 mm, ejection height: 1,400 mm, type of input current: three-phase, conveying length: 2,750 mm, input voltage: 380 V, transport height: 450 mm, conveyor belt length: 5,595 mm, input current: 1 A, input frequency: 50 Hz, Deburring conveyor technology for dry operation Type: P-40 Design: Z-shape Chain pitch: 40 mm Conveyor width (standard): 680 mm Container width: 680 mm Loading length: 2,750 mm Loading height: 240 mm Loading area: 2,750 mm Incline angle: 30° Discharge height: 1,550 mm Discharge height above floor: 1,400 mm Discharge length: 450.0 mm Total conveyor length: 6,157 mm Lifting eyes: Yes Inclined section covered: Yes Loading hopper: Yes Covers in loading area: Smooth sheet steel Discharge chute: Yes Discharge chute height: 150 mm Reach-in protection per EN618: Yes, conveyor CE-compliant Castors: Yes Adjustable feet: Yes Drive: Gear motor Drive position: Right side Brand: SEW Power consumption: 0.25 kW Overload protection via limit switch (slip ring) Godpfowvgpkex An Rsit

Condition: used, Year of construction: 2007, x-axis 10.100 (2x 5.000) mm y-axis 3.000 mm z-axis 1.500 mm Control Sinumerik 840 D Siemens distance between columns max. 3.000 mm passage max. 1.950 mm distance spindle center to table max. 1.800 mm distance spindle nose and table 1.350 / 1.500 mm type P 8005020/00-4 turning speed range - main spindle max. 18.000 min/-1 power capacity - main spindel 20 kW max. Torque 48 Nm tool taper HSK-A63 DIN 69063 Spindle Extension 450 mm swivellable B: +110° / -10 ° rotatable C: +/- 200 ° type P 8002320/00-4 turning speed range - main spindle 20 - 5.000 min/-1 power capacity - main spindel 40 kW max. Torque 1.100 Nm tool taper HSK-A100 DIN 69063 Spindle Extension 300 mm swivellable B: +110° / -10 ° rotatable C: +/- 200 ° table surface area 4.000 x 2.200 (2x) mm max. table load 12 / 20 t height over floor 700 mm number of T-slots 11 + 19 T-slot - width 28H7 mm T-slot - distance 200 mm number of toolpositions 327 pos. number of toolpositions HSK A63: 156 pos. number of toolpositions HSK A100: 171 pos. max. tool diameter HSK A63: 52 mm max. tool length HSK A63: 250 / 500 mm max. tool weight HSK A63: 5,0 kg max. tool diameter HSK A100: 315 mm max. tool length HSK A100: 500 / 800 mm max. tool weight HSK A100: 40,0 kg feed speeds X: max. 30.000 mm/min feed speeds Y/Z: max. 40.000 mm/min feed speeds B: 3.600 °/min feed speeds C: 2.160 °/min Accelaration X: max. 1,5 m/s² Accelaration Y/Z: max. 3,2 m/s² x-axis 10.100 (2x 5.000) mm y-axis 3.000 mm z-axis 1.500 mm b-axis +110° / -10 ° c-axis +/- 200 ° total power requirement 150 kVA dimensions of the machine ca. 25,0 x 12,0 x 7,0 m Godpfxjvy Ihdj An Rsit 5-Axis Gantry-Big-Machining-Center DROOP + REIN - TFS 22 40 DT D40 P - two Milling-Heads - ca. 4.000 Power On Hours - X-Achse 10.000mm (coupled) / 2x 5.000mm (single-table) - 3 axes simultaneously (X, Y, Z) - 2 positioning axes (B, C) - tools upon request

Condition: new, Year of construction: 2025, NEW - ex works Drilling depth and speed display - digital with background lighting Thread cutting capacity M30 (depending on pitch) Optional: R1 spindle speeds with gear ratio, infinitely variable, speed range 100-2000 rpm Optional: R2 spindle speeds with gear ratio, infinitely variable, speed range 70-1400 rpm Drilling capacity 35/40 mm Spindle MK 4 Drilling depth 160 mm Thrust 300 mm Usable table surface (swivelling) 590 x 450 mm Manual feed Table height adjustment with rack and pinion Gjdpfxod H Rhne An Reit Machine dimensions (W x D x H) 610 x 850 x 1920 mm Motor three-phase 400 V pole-changing 1.5/3.0 kW Weight 420 kg 3 year guarantee FREE DELIVERY (within Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: good (used), Year of construction: 1990, - For connection to multi-spindle automatic lathes - Storage: surface magazine 4x 450 mm support - Bar Ø: 4-52 mm (depending on guide channel) Gsdpfxeihhz Re An Rsit - Ø guide channel: 44 mm - bar length: approx. 3000-4200 mm - dimensions LxWxH: 4600 x 750 x 1300 mm - Weight: approx. 850 kg

Condition: used, mileage: 10,710 km, gearing type: other, fuel type: electric, color: red, overall weight: 1,330 kg, empty load weight: 700 kg, maximum load weight: 150 kg, number of seats: 1, first registration: 09/2017, emission class: none, suspension: other, Year of construction: 2017, operating hours: 10,710 h, driver cabin: other, fuel: electricity, The Linde P 60 Z tow tractor is a reliable electric vehicle from 2017 with an impressive mileage of 10,710 km. The energy-efficient tow tractor is powered by a 48V battery (3 EPZV 300), thus offering an environmentally friendly alternative to conventional fuels. The tow tractor has only been used by one previous owner and is in used but well-maintained condition. The vehicle is finished in a striking red and has one seat. With a permissible gross vehicle weight of 1,330 kg, it is suitable for a wide range of industrial and commercial applications. A charger is not included in the offer. Giodpfx Aeu Tw E Tjn Rot A variety of services are available for interested buyers, including a registration service and various loading options. A viewing at the Rohrbach (Palatinate) location is possible without prior appointment. The tractor can be delivered within Germany for an additional charge. Further information is available by phone or via the seller's website. Sale only to commercial customers (agriculture, freelancers, small and large businesses) or for export. Errors and prior sale excepted.

Condition: excellent (used), Year of construction: 2011, Type: Conventional milling machine Manufacturer: Avia Model: FNE 40P Year of manufacture: 2011 Control: Conventional with digital display Serial number: 90494 Gjdpfxsxk R Hao An Roit Longitudinal travel (X): 620 mm Cross travel (Y): 420 mm Vertical travel (Z): 400 mm Table: 400 x 800 mm Max. workpiece weight: 400 kg Spindle taper: SK 40 Spindle speed: 40 – 4000 rpm Weight: approx. 2000 kg Digital display: Heidenhain ND 780 integrated in the control panel

Condition: excellent (used), I offer a professional vacuum pump from the renowned German manufacturer Becker, model VT 4.40. This device is designed for industrial use and is characterized by high reliability and maintenance-free operation. The pump features oil-free (dry-running) technology, which means it does not require oil and minimizes operating costs. Ideal for applications where cleanliness and stable vacuum are required. The visual condition is very good. The device is complete. Technical data: Manufacturer: Becker, Germany Godpfx Ajyxgt Ion Roit Model: VT 4.40 Year of manufacture: 2007 Capacity: approx. 40 m3/h at 50 Hz Vacuum: up to approx. 150 mbar absolute Motor power: approx. 1.25 kW Power supply: three-phase Speed: approx. 1420–1700 rpm Weight: approx. 38–40 kg Applications: CNC machines and vacuum tables vacuum packaging wood industry printing and graphic arts material handling Advantages: oil-free operation – no oil service required quiet and stable performance robust industrial construction long vane life Made in Germany

Condition: good (used), Year of construction: 1963, Stroke = 250 mm On request, transport and loading can be organized across Europe at an additional cost. Prices excl. VAT Inspection possible by appointment. Contact us – our team will be happy to assist you. Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, ETC. Do you need a high-quality yet affordable machine for your production? Or do you want to sell your equipment? Gjdpfxoy H Ic Hj An Rjit For further information or contact options, please use the contact form.

Condition: excellent (used), For sale: horizontal planer/slotting machine from a renowned manufacturer: Ing. Karl Anderle, Steyr (Austria) Robust, heavy-duty industrial machine – ideal for workshop, toolmaking or production. 📊 Technical data: Manufacturer: Ing. Karl Anderle Type: 40 Year of manufacture: 1962 Machine number: 948/336 Working speeds: 30 / 60 / 90 / 180 strokes/min ⚡ Motor data: Manufacturer: FFD Wien Type: DU 1.5/2/4 Power: 2 / 1.5 HP Supply voltage: 380 V Current: 3.3 / 2.9 A RPM: 2800 / 1400 rpm Frequency: 50 Hz 2-speed motor ✅ Condition: Used machine Normal signs of use Good technical condition Complete – as shown in the photos 📹 Video of machine operation available (WhatsApp) Giedsy E N Tdepfx An Rst 🚚 Transport: Possible shipping on a pallet Personal collection Assistance with organizing transport available

Condition: used, mileage: 749,000 km, power: 397 kW (539.77 HP), first registration: 06/2009, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: orange, gearing type: automatic, loading space length: 5,900 mm, loading space width: 2,470 mm, loading space height: 600 mm, Year of construction: 2009, Equipment: ABS, air conditioning, crane, parking heater, MAN TGX 28.540 / 6x2 Platform 5,90 m + CRANE + JIB + REMOTE CONTROL Imported / Accident-FREE Gisdem Tgviopfx An Rjt IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2009 ? MILAGE: 749 000 km EQUIPMENT: ? ABS ? C. LOCKING ? EL. WINDOWS ? AIRCONDITION ? TOWBAR ? POWER STEERING ? ENGINE BRAKE ? Immobiliser ? TACHOGRAPH PLATFORM: 590 x 247 x 60 cm (L x W x H) CAPACITY: 9 000 kg TOTAL WEIGHT: 26 000 kg WHEELBASE: 480/139 cm TIRE SIZE: 315/80R22,5 SUSPENSION: FRONT: SPRING BACK: AIR CRANE: PALFINGER PK 29002 + JIB PJ060 + REMOTE CONTROL TEL: * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ?????

Condition: new, Year of construction: 2026, CORMAK PLBM290 horizontal drilling machine is a professional solution for efficient wood machining. Equipped with advanced features ensuring proper machining quality. Machine features accurate drilling achieved by a bilaterally tilted drilling unit four-level head (16-20-22-25 mm) 2 limiting switches left/right spindle rotation simple, one-handed handling 100 mm diameter extracting connector Technical data Table dimensions 570x300 mm Table extension 600x300 mm Drilling table height 810 mm Drilling depth 155 mm Drilling width adjustment 300 mm Height adjustment 160 mm Spindle speed 1400 / 2800 rpm S1 continuous work motor power 3.8 kW Power supply Gjdpfx Anevuq Hlo Reit 400V Extracting connector diameter 100 mm Two-jaw chuck 0-20 mm Dimensions 570x850x1340 mm Weight 140 kg