Used Vatron Mau Mau 4000 for sale (2,636)

Condition: used, Manufacturer : Vatron MAU Agitation: Rayneri Rcjdpfx Ahox Rz Nhscsf Typhoon impeller diameter Ø400 / 3 kw / 323 rpm - Polished stainless steel, thickness 6 mm - Diameter. 2000 mm - Double insulation jacket 30 mm / stainless steel sheet 3 mm - Washing turbine - AC & vacuum connections

Condition: ready for operation (used), Wingspan: 3950 mm Rcedpfezp Iqgex Ahcsf Overall height: 3650 mm Load capacity: 4000 kg without lifting device

Condition: excellent (used), The DAGE Series 4000 Bond Tester is a professional device designed for performing Bond Pull and Die Shear tests in the semiconductor and electronics industries. This device is used in quality control laboratories, research and development departments, and during the production of microelectronic components. This unit is equipped with a precision positioning table, joystick controls, a keypad panel, and work lighting. The set also includes the original PCI control card (Baldor NextMove PCI-2 Motion Control Card) and additional electronic components visible in the photos, which are a valuable addition to the set. Rsdpfx Aszma Tbohcecf Technical data: Manufacturer: DAGE (Nordson DAGE) Model: DAGE Series 4000 Bond Tester Year of manufacture: 2010 Power supply: 110 / 230 V AC, 1-phase Frequency: 50/60 Hz Power: 250 VA Control: joysticks and keypad Precision XY positioning table Required compressed air: 4 bar (oil-free) Vacuum connection Excellent visual condition. The set being sold is consistent with the presented photos and includes all visible components, including the additional PCI control card.

Condition: excellent (used), DAGE Series 4000 PXY – Bond Tester / Shear & Pull Tester for Connection Strength Testing Rcedpfxezma Ske Ahcef

Condition: like new (used), 92 linear meters of galvanized pallet racking for outdoor use, Nedcon Like new, see pictures! A top-quality racking system from the major manufacturer NEDCON – a subsidiary of Voestalpine AG with headquarters in the Netherlands. Frame: Height 7.2 m, Depth 110 cm, Strong profiles, reinforced bracing, wind and snow load calculated. Frame and base plates are Sendzimir galvanized. Beam length 2.7 m, hot-dip galvanized, Beam profile 130/50mm, Beams with load capacity/bay: 4000 kg Negotiable price: on request! The offer includes: + 36 units of pre-assembled frames, depth 110 cm, height 7.2 m + 210 units of beams, length 2.7 m, 4000 kg load capacity/bay + 420 units of safety locking mechanisms + 72 units of concrete anchors Additional cost for hot-dip galvanized feet incl. upright protection: €50 net per frame Roof structure available on request! Load capacity signs, documents, etc. are, of course, included. Further accessories can be found in the accessories catalog. Goods are in stock. Transport and assembly are available on request. Other configurations available on request. Over 2000 meters available. Inspection possible at any time by appointment. Further information on request. We constantly have over 5000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, details, and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT, ex warehouse) Lenox Trading – Top warehouse technology & used & new heavy-duty racking Description: Are you looking for high-quality warehouse racking for sale? With around 100 employees, Lenox Trading is one of the largest dealers for new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). Redpjfndh Tjfx Ahcjcf ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking immediately available • 20,000 m² of storage platforms & steel platform structures immediately available • Weekly 30–50 semi-trailer loads of goods turnover for maximum selection 📦 OUR RANGE (BUY CHEAP ONLINE): Whether you want to buy pallet racking, heavy-duty racking, high-bay racking, shelving, tire racking or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, disassembly and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer warehouse technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND BUSINESS: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearing orders, we offer a complete all-round package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete inventory, including thorough cleaning. 2. Commission-based auction: Carrying out auctions on behalf of clients. Our full-service provided by our own employees: cataloging, office preparation, inspection, goods dispatch, logistics, dismantling and thorough handover. Whether you became aware of us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking system – we guarantee the best conditions. Contact us for a non-b

Condition: new, New motor from renowned German manufacturer Baumüller Nürnberg. The motor is unused, warehouse stock (old stock). No signs of operation. Technical data – from nameplate: • Manufacturer: Baumüller Nürnberg GmbH • Type: GNA 132 MV • Supply voltage: 400 V • Current: 39 A • Power: 12 kW • Rotational speed: 1260–4000 rpm • Excitation voltage: 310–365 V • Excitation current: 0.17–0.38 A • Insulation class: F Redpfx Ahsyga Ugececf • Protection class: IP23 • Standard: VDE 0530 • Serial number: 88104349 The motor is intended for automation, CNC, special machine applications, and as a spare part for existing Baumüller drive systems. Price quoted per unit.

Condition: like new (used), 42 linear meters of galvanized pallet racking for outdoor use, Nedcon Like new, see pictures! A top-quality racking system from the renowned manufacturer NEDCON - this is a subsidiary of Voestalpine AG with its headquarters in the Netherlands. Frame: Height 7.2 m, depth 110 cm, strong profiles, reinforced bracing, wind and snow load taken into account. Frame and base plates are hot-dip galvanized. Beam length 2.7 m, hot-dip galvanized Beam profiles 130/50mm, beams with load capacity per bay: 4000 kg Negotiable price: on request! Offer includes: + 16 units of frames, pre-assembled, depth 110 cm, height 7.2 m + 90 units of beams, length 2.7 m, 4000 kg load capacity per bay + 180 units of locking devices + 32 units of concrete anchors Surcharge for hot-dip galvanized feet including upright protection: €50,- per frame (net) Roof structure available on request! Rcsdpfx Aofndlljhcjf Load capacity signs, documents, etc. are of course included. Further accessories can be found in the accessories catalog. Goods are in stock. Transport and assembly are possible on request. Other configurations available on request. Over 2000 linear meters available. Inspection possible at any time by appointment. Further information on request. Constantly over 5000 linear meters of pallet racking from numerous manufacturers in stock. (Changes and errors in technical data, information and prices, as well as prior sale reserved! See our terms and conditions, all prices excl. VAT, ex warehouse) Lenox Trading – Top warehouse technology & heavy-duty racking, used & new Description: Are you looking for high-quality warehouse racking for sale? With around 100 employees, Lenox Trading is one of the largest dealers in new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ PROMPTLY AVAILABLE: • Over 10,000 linear meters of racking promptly available • 20,000 m² of storage platforms & steel construction platforms immediately available • 30–50 semi-trailers of goods turnover weekly for maximum selection 📦 OUR ASSORTMENT (BUY CHEAPLY ONLINE): Whether it's pallet racking, heavy-duty racking, high-bay racking, shelving systems, tire racks, or racking for IBC containers - we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling, and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / LIQUIDATION: • SSI Schäfer (Schäfer Warehouse Technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, Heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a complete worry-free package: 1. Fixed-price purchase: Purchase of merchandise, equipment & complete inventory including thorough clearance. 2. Commission auction: Conducting auctions on behalf of clients. Our full-service through our own employees: cataloging, office preparation, inspection, goods delivery, logistics, dismantling, and thorough handover. Whether you found us through heavy-duty racking or are looking for heavy-duty racking, galvanized / heavy-duty racking system - we guarantee the best conditions. Contact us for a non-binding offer!

Condition: like new (used), Year of construction: 2025, Maufung MF-Smart390A Auto Book Casing In & Joint Forming Line Model: MF-Smart390A Power Supply: 380V, 50HZ Mainframe Power: 9kW Block Thickness: 2–60mm Block Size (Max): 390×297mm Block Size (Min): 100×100mm Mechanical Speed: 600 pcs/hour Machine Dimensions (L×W×H): 4950×2650×2000mm Machine Weight: 2000kg Maufung Head and Tail Banding Machine Model: MF-HBM420 Model: MF-HBM420 Power Supply: 220V, 1 Phase, 50HZ Mainframe Power: 1.5kW Air Compressor: 6Bar Machine Speed: 11 pcs/minute Book Block Thickness: 10–60mm Book Block Size (Max): 350×420mm Book Block Size (Min): 100×100mm Machine Dimensions (L×W×H): 700×850×1550mm Machine Weight: 270kg If you have any questions or need more information, feel free to send us a message or give us a call. Rcedpfx Asy Sv Injhcef

Year of construction: 2017, condition: like new (used), Set for robotic laser welding Rsdorfucqepfx Ahcscf Scope of supply: 1 x IPG YLS-4000 4KW output laser (2017). Fiber core 300 microns and 30 meter length, LCA LCA. Optical coupler inside. Profinet interface. Power ON work time : 32832 hours 1 x IPG CHILLER.(2017). 1 x HIGHYAG BIMO LASER WELDING HEAD with air knife. Machine can be inspected. Very good condition. Connected, can be tested. Shipping to EU countries is our responsibility and the shipping cost is free.

Condition: excellent (used), CATALOGUE NUMBER 8019 Rcodpfxszw Dg Te Ahcof TECHNICAL DATA - Max. cutting length: 3700mm - Max. cutting height: 1300mm - Max. cutting width: 700mm - Main saw motor power: 11kW - Clamping beam - Saw blade diameter: 550mm - Work table height: 860mm - Pneumatic clamping - Work table width: 135mm - Dust extraction nozzle diameter: 2x150mm - Overall dimensions (L/W/H): 5600x1500x1900mm - Weight: approximately 3000kg - For trimming boards - Pneumatic clamping - Hydraulic saw guidance - Cutting width adjustable hydraulically - Unpainted - Used saw, very good condition Net price: 39900 PLN Net price: 9500 EUR, depending on the exchange rate of 4.20 EUR (Prices may change due to significant fluctuations)

Condition: excellent (used), 514 USED Bun, roll line Koenig Mini Rex 4000. TECHNICAL DATA: - Power supply: 3x400V+N - Power: 1.3kW Rsdozwxurspfx Ahcecf The price is a net price. Paid options available: transport. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: used, Year of construction: 1987, measuring range X-axis 540 mm measuring range Z-axis 400 mm table diameter 740 mm enlargement 20fach range L-W-H ca. 1,70 x 1,00 x 1,70 mm weight ca. 600 kg Rcsdpfx Ahstqqk Eecjf acc.: DRO on 2 axis

Year of construction: 2020, condition: ready for operation (used), functionality: fully functional, WMW Niles, Czeck Republic Made, CNC(Siemens Controls, Retrofitted in 2020) Floor Type Heavy Duty Lathe ,With heavy Duty Tail Stock, Steady Rest, Rollers, and with 6000 MM X 4000 MM Floor plates Redpezww R Sofx Ahcscf

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 4,963 h, load capacity: 5,000 kg, lifting height: 4,000 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 2,950 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 1,350 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 23X10-12, rear tire type: superelastic tires (black), rear tire size: 355X45-15, overall weight: 12,500 kg, empty load weight: 7,500 kg, total height: 2,600 mm, total length: 2,500 mm, total width: 2,300 mm, color: green, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, -- USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS -- 🛠️ Years of Experience | 🧰 In-house Service & Paint Shop | 🤝 Expert Consultation | 🚛 Own Transport Fleet | 🔧 Comprehensive After-sales Support Looking for a forklift you can truly rely on? We are a reputable dealer of new and used forklifts, serving the industry for many years. Our customer base spans all of Europe—from small businesses to major industrial facilities. Our forklifts are more than just equipment—they are your assurance of seamless and dependable logistics. -- What sets us apart? -- ✅ Every forklift undergoes a thorough technical inspection and servicing (including checks, tests, oil & filter changes, and component refurbishment) ✅ Full UDT (Office of Technical Inspection) certification available on request ✅ In-house paint and service workshop—machines are optimized both technically and aesthetically ✅ Pan-European delivery—provided by our skilled drivers ✅ Operator training and on-site machine demonstration at handover ✅ Ongoing after-sales technical support—we stay connected post-purchase ✅ On-site viewing and test drives welcomed at our facility ✅ Hundreds of satisfied customers throughout Europe—become one of them today ✅ Financing options available—we collaborate with leading leasing providers ✅ Invoicing in EUR or PLN—as per your preference -- FOR SALE -- COMBILIFT C5000 – Four-Way Forklift Truck 📅 Year of manufacture: 2015 Rsdpfxozw I Ube Ahcocf ⏱️ Operating hours: 4,963 h 🔋 Propulsion: GAS / LPG 📦 Load capacity: 5,000 kg 📏 Mast: Duplex – 4,000 mm lift height 🔩 Fork positioner – width: 1,350 mm | Forks: 1,200 mm 🛞 Superelastic tires – 100% condition 🧪 Technical condition: Excellent – fully serviced 🎨 Visual condition: Clean, corrosion-free, and ready for work 📐 Dimensions: - Lowered mast height: 2,600 mm - Total length: 2,500 mm - Overall width: 2,300 mm - Fork positioner width: 1,350 mm - Overall height: 2,950 mm -- Ideal for: -- 🏭 Narrow-aisle warehouse applications 🌲 Timber, steel, and pipe handling industries 📏 Handling long and bulky loads 🏗️ Both indoor and outdoor operations -- FT Logistics – Quality you can depend on. Service you can trust. --

Condition: used, Year of construction: 2004, operating hours: 31,350 h, Bed milling machine Make: ANAYAK Model: VH Plus 4000 Year of manufacture: 2004 Spindle hours: approx. 31,500 hours Control: Heidenhain 530 Table size: 4200 x 1100 Travel: x: 4000, y: 1200, z: 1500 mm Max. spindle speed: 5000 rpm Max. feed rate: 10000 mm/min Pick-up location: Bremen The machine is in daily use, so operating hours will continue to increase. An inspection can be arranged at any time. Disassembly, loading, etc. are the responsibility of the buyer. A 2-ton forklift and a 5-ton overhead crane are available for "small parts." _____ Subject to prior sale and errors in the technical specifications. The technical specifications have been compiled to the best of our knowledge, but do not constitute guaranteed characteristics. Our general terms and conditions apply; in addition, the seller is not liable for typing or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. Rcodpfx Ahsy Uy Ecscjf The technology and wear of the offered items are consistent with their age. Used machines are sold exclusively to commercial enterprises and without warranty.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 15066, 1 x Attwell Labellers Ltd inline 3-head side-apply / wrap-around labelling machine with ICE Zodiac ES 8.4 Clarity thermal transfer printer. Mounted on height-adjustable frame. It is designed to apply labels to a variety of containers including bottles, jars, cans, and tubs, making it suitable for diverse packaging needs. The label dispensers are run by a servo / stepping motor and is controlled by a micro-processor. Manufacturer - Attwell Labellers Ltd and EME etiketteringsmaskiner ApS. Models of Labelling Heads - 2 x EME Series 4000 and 1 x EME Series 2000. Rcodsy Hkqyopfx Ahcof Model of Conveyor Section - EME MO-3000-S4-S2. Serial Number - 15066. Date of manufacture - 2015. Belt - slatted, 85mm wide. Overall dimensions - 3000mm long x 1500mm wide x 1300mm high (adjustable - can go higher).

Condition: used, Pair of cast iron angle plates Drilling diameter: Ø 27 mm Width: 575 mm Rsdjzwxg Uepfx Ahcocf Depth: 2000 mm Total height: 4000 mm Unit weight: approx 6 T

Condition: used, Year of construction: 2009, Technical details: Beam Hour: unbekannt / unknown h laser capacity: 4000 W The TLF4000 resonator was installed in a Trumpf True Laser 2525: Rjdpfx Aoyuvcijhcscf Laser power: 4,000 W (4 kW) Wavelength: 10.6 µm Beam mode: TEM01* Pulse frequency (gating): 100 Hz – 10 kHz Gas consumption (laser): CO2: approx. 1 l/h N2: approx. 6 l/h He: approx. 13 l/h Cutting gas O2: approx. 500 – 2,000 l/h Electrical power consumption: approx. 33 – 67 kW Adjustable laser power: programmable in 1% increments Laser type: CO2 laser with closed gas circuit Translated with (free version) *

Condition: used, Technical details: floor-plate length: 4000 mm plate width: 1500 mm plate height: 450 mm weight of the machine ca.: 5,9 t transport dimensions LxWxH: 4,0 x 1,5 x 0,45 m 3 units available – price per unit T-slot clamping plate Dimensions: 4000 × 1500 × 450 mm ·6 T-slots ·Heavy-duty design for machine setup, fixture construction and precision machining Rcedpfx Aoy Rru Iehcef ·Ideal for milling, drilling and assembly applications *

Condition: used, Year of construction: 2004, travel distance X-axis: 1,600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: Fanuc, overall weight: 9,000 kg, table length: 825 mm, table width: 625 mm, controller model: 21i MB, Travelling Bridge CNC Vertical Machining Centre Table size (2) 1100x600 + 850x600 mm. Number of pallets: 2 Movement x-Axis 1600 mm. Movement y-Axis 600 mm. Movement z-Axis 500 mm. 4th Axis (Rotary table) NC Max table load 1200 kg Number of tools in magazine 51 pieces. Maximum spindle speed 12.000 R/pm. Tool taper DIN 69871A CNC control Fanuc 21i MB If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock. Rcodpfezavlusx Ahcjf

Condition: used, Year of construction: 1995, machine/vehicle number: 20373, functionality: unexamined, power: 4 kW (5.44 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 90 mm, saw blade diameter: 315 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, saw blade bore: 30 mm, rotational speed (max.): 4,000 rpm, rotational speed (min.): 4,000 rpm, overall weight: 127 kg, table height: 850 mm, Equipment: CE marking, saw blade guard, Scheppach table saw ts 4000, max. cutting height 90 mm, at 45° max. 60 mm, max. saw blade diameter 315 mm, tilting capability 0° to 45°, 4 kW (5.4 HP) motor, 2,000 mm sliding table, lifting and transport device, foldable table extension, tenoning attachment, SUVA saw blade guard, GS wood dust tested with CE mark, as inspected at location Seevetal, without transport, subject to prior sale. Rcedpfx Asy N Sfqshcof

Condition: used, Year of construction: 1998, Transnorm Rising falling Incline belt conveyor with leading belt GF 25000+4000-1000-900 RA2288 Technical data: Conveyor length (NL): 29000 mm ( 25000 mm riser segment + 4000 mm forerun) frame width (NB): 1000 mm, 1100 mm with motor belt width (GuB): 900 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,2 Drive: SEW gear motor, Electrical data: 50Hz V380-500, kW2,2 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Redpjtp Tv Eefx Ahcecf Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Parallel Lathe SCULFORT type MAXICAP SENIOR 380 x 4000 RN Between points: 4000 mm Maxi Ø on bench: Ø 780 mm Maxi Ø over saddle: Ø 580 mm (rear trolley dismantled) - Ø 500 mm (without rear trolley dismantled) Maxi diameter in brocken bed: Ø 1160 mm Width in brocken bed: 400 mm Spindle: Ø 80 mm Spindle speed: from 16 to 1280 RPM Rcodpszwgqhofx Ahcjf Square turret 3-jaws chuck Ø 400 mm Threadings: Metric + Withworth 3 points steady max Ø 350 mm Tailstock CM6 Motor power: 13 CV Feeds: auto transverse + longitudinal Clutch rapid used Lubricant tank Dimensions (L x W x H): 6500 x 1800 x 1900 mm Weight: approx 7 T

Condition: reconditioned (used), Year of construction: 2019, operating hours: 1,744 h, functionality: fully functional, working width: 850 mm, area performance: 6,375 m²/h, overall weight: 805 kg, warranty duration: 12 months, water tank capacity: 200 l, TASKI SWINGO 4000 SCRUBBER NEW 6V 250Ah GEL BATTERIES (SIAP) (4x) Manufactured in 2019 Machine has 1,744 hours of operation. 850mm cleaning head equipped with two new medium-hard disc brushes for work on any surface. New polyurethane squeegee rubbers resistant to oil, grease, and petroleum products. A built-in battery charger simplifies daily operation. The device is equipped with a new, durable drain hose and new suction hoses. A new suction turbine ensures high water suction power from the squeegee. Each device we offer has individually taken photos; you buy exactly what you see. TECHNICAL DATA: Power supply voltage: 24 V Brush working width (mm): 850 Suction width (mm): 1100 Theoretical capacity (m²/h): 6375 Clean/dirty water tank capacity (l): 200/210 Working speed (km/h): 7.5 Number of brushes (pcs): 2 Weight without batteries (kg): 295 Total weight, ready to use (kg): 805 DIMENSIONS: Length with squeegee (mm) 1780 Height (mm) 1400 Width with squeegee (mm) 1100 Width without squeegee (mm) 890W INCLUDED: NEW 6V 250Ah SIAP GEL BATTERIES (x4) NEW 24V 600W suction turbine NEW 430mm PPL 0.5 disc brushes (x2) NEW drain hose Rcsdpfjw A Il Tsx Ahcjf NEW suction hoses Built-in battery charger Squeegee blade with new oil-resistant rubbers 5L Tenzi Normal fluid - FREE KEY FEATURES: The 200-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. Thanks to its design, the machine is highly maneuverable. A small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface. The ergonomically designed cockpit and centrally located operator's seat provide excellent visibility of the surface being cleaned. The large working width (850 mm) ensures high surface coverage. The control panel is very easy to read and intuitive to use.

Condition: used, Hydraulic Press Brake SAGITA BEYELER 200/4000 Slide travel: 150 mm Rcodpfx Ahjzwclnjcof Throat depth: 300 mm Distance between uprights: 3100 mm Motor power: 15 kW Manual Back gear gauge The machine was only used for pre-bending of Hardox sheet Voltage: 380 V Dimensions (L x W x H): 4100 x 1800 x 2700 mm Weight: approx 15 T