Used Valk Welding Panasonic Tm 1400 G3 + Ewm Tetrix 352 Ac for sale (20,051)

Condition: like new (used), Year of construction: 2020, operating hours: 200 h, functionality: fully functional, arm reach: 1,437 mm, For sale: Panasonic robotic TIG welding workstation purchased from ValkWelding. Workstation includes: Panasonic TM 1400 G3 robot (6 axes, reach 1437 mm, payload 6 kg), two-axis L positioner PD1000/500, TIG welding unit Tetrix 352 AC/DC Synergic CW, accessories, and safety equipment. This workstation is distinguished by its ability to safely weld not only steels and stainless steels but also aluminum. The process is highly synchronized with wire feeding and is capable of seam tracking and adapting to changes in arc height. A very versatile device. I am selling this system because our original capacity expectations have not been met (we don’t have work in the hundreds or thousands of pieces). Over its entire lifetime (approximately 5 years), the workstation was powered on for around 200 hours and did actual test welding for less than an hour in total. It is practically in like-new condition. It would be a pity for it to just “collect dust.” All support has been directly provided by ValkWelding. In case of sale, they will arrange installation, commissioning, and personnel training as agreed. Lsdpjy Efmgefx Ancjaa

Condition: like new (used), EWM acticARC Tetrix T352 AC/DC Robotic WIG/TIG - Welding machine with cool cooling unit Very good condition Used very little Collection in 74722 Buchen. Shipping within Germany possible for €100 gross. Used equipment – normal signs of use, but fully operational. Ljdpfoyilubsx Ancoaa Further details and pictures available on request.

Condition: excellent (used), Turntable length: 3330 mm Max. load capacity: 500 kg Rotational speed: 16 rpm PANASONIC robot – serial number A0225 M Lsdpfew U Agbex Ancjaa Max. payload: 6 kg Reach: 1374 mm Control unit: YA-1TCR61E00 Safety cabin with ALBANY ASSA ABLOY doors Dimensions: 9400 × 2600 × 2900 mm Weight: approx. 5000 kg

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 0000243380, type of input current: DC, Very good welding machine from EWM. Was used as a replacement unit in our operation, therefore only lightly used. Here are some details: • TIG and MMA inverter DC welding machine • Mobile, water-cooled, 5m power supply cable • Faster and higher-quality welding thanks to EWM activArc technology • COMFORT control: proven convenience; all essential welding parameters directly accessible, up to 8 JOBs (welding tasks) can be programmed by the user for recurring welding operations Lsdexfgg Sspfx Anceaa • Maximum efficiency and outstanding quality thanks to fully digital inverter welding technology • Suitable for production and repair work in the food and chemical industry, pipeline, vessel, plant, vehicle, and mechanical engineering, as well as robotic applications • Intelligent enclosure design with optimized airflow for better cooling performance and reduced internal contamination • Excellent mobility: easy to move thanks to large wheels, fits through standard doors, and easy loading/unloading due to equal wheel track width • TIG welding with HF ignition and Liftarc • Spot mode, 2-stroke, 4-stroke, tacking, pulsing, and kHz pulsing (2.5 kHz) • Adjustable parameters: start, welding, downslope, and end current; pre- and post-gas flow time; up and down slope time; pulse and pause times; ignition management • MMA welding: adjustable hot start current and time, arc force, anti-stick • Digital display for welding voltage, current, and parameters • High-performance cooling system with centrifugal pump and large 12-litre tank, pressure switch, pump and fan are temperature-controlled

Condition: excellent (used), Maximum reach: 1374 mm Control: Panasonic WG-E1400 Lajdpfexnmqcjx Ancja Source: Panasonic YD-500AF2 Two rotary positioners

Condition: excellent (used), Year of manufacture: 2005 Maximum reach: 1374 mm Maximum payload: 6 kg Number of axes: 6 Axis ranges: J1 +170° – 170° Lajdpfxoxnml Ts Ancja J2 +155° – 90° J3 +90° – 80° J4 +270° – 270° J5 +90° – 150° J6 +400° – 400° Control unit: Panasonic WG-E1400 Power source: Panasonic YD-500AF2 Two Panasonic YA-1GJB11 positioners Max. positioner load capacity: 200 kg

Condition: ready for operation (used), Year of construction: 2008, number of axes: 6, This 6-axis PANASONIC TA-1800WG Welding Robot was manufactured in 2008. It includes a 350A welding source, a VWP 316/351/95-3 welding gun, a BRG 2000 mechanical cleaner, an 800mm plinth, and a 750 H-manipulator. If you are looking to get high-quality welding capabilities, consider the PANASONIC TA-1800WG machine we have for sale. Contact us for more information. • 6-axis welding robot Lajdpeyfd N Eefx Ancsa Additional equipment • Welding source: 350A (SP-Mag / Hyper Dippulse) • Welding gun: VWP 316/351/95-3 • Mechanical cleaner: BRG 2000 • Plinth: TA, H=800 mm • H-manipulator: 750

Condition: used, We offer air conditioning outdoor units in package deals with a mix of brands such as Panasonic, Mitsubishi, and Carrier (and similar top brands, depending on availability). These packages are ideal for trade, export, and installers looking to purchase in bulk. The packages are sold at a single fixed package price. No individual sales. Lasdpfx Anoycr Scecsa If interested, feel free to send a message.

Condition: like new (used), Year of construction: 2022, operating hours: 4 h, functionality: fully functional, type of input current: three-phase, total height: 960 mm, total width: 560 mm, total length: 1,040 mm, overall weight: 130 kg, warranty duration: 6 months, electrical fuse: 400 A, Equipment: documentation/manual, The equipment has been checked by an authorized service center and is ready for operation. Condition: Almost NEW (used 4h) Warranty of 6 months Model: EWM Titan XQ R 400 AC puls Welding current range: 20 – 400 A Duty cycle (40 °C): 400 A (eta) 100% Power supply: 3~ 400 V, 50/60 Hz Processes: MIG/MAG standard, pulse, double pulse, forceArc, rootArc, AC Arc TBI BRG-2-ES-DEA attachment for automatic cutting and nozzle cleaning. Wire diameters: Steel: 0.8 – 1.6 mm Aluminium: 1.0 – 1.6 mm Cooling: Water-cooled (integrated cooling unit) Efficiency: >90% Dimensions (L×W×H): approx. 960 × 560 × 1040 mm Weight: approx. 130 kg Robot Interface Equipped with robotic interface (digital/analog I/O and Fieldbus options). Compatible with major robot brands: ABB, KUKA, Fanuc, Yaskawa, Panasonic, Kawasaki, OTC. Full integration possible – process parameters controllable directly via robot controller. German quality – designed for continuous industrial use. AC/DC pulse technology for aluminium and non-ferrous metals. Large database of synergic programs for easy setup. High energy efficiency, reduced operating costs. Ready for manual welding or complete robotic integration. Lsdpsxdncxsfx Ancsaa Mobile trolley with 4 wheels for easy handling.

Year of construction: 2021, condition: ready for operation (used), 20 identical welding machines are available. Type: cool41 U31, standard: IEC 60974-1, -2, -10 C.L.A, mains voltage: 400V, frequency: 50/60Hz, protection class: IP23, power consumption P min: 0.9kW, cooling capacity P max: 0.35MPa (3.5bar), max. current consumption: 2.5A, length: 539mm, width: 210mm, height: 415mm, weight: 22kg. Control: Comfort 2.0 with intuitive operation via click wheel, pulse spot normal mode continuously adjustable (especially for TIG welding), pulse pause ratio (balance) adjustable for example from 10-90%, Hz and kHz pulses up to approx. 15kHz, ActivArc technology dynamic arc control to ensure constant performance despite distance fluctuations and to prevent electrode sticking, improved root and penetration quality, spotArc Spotmatic functions for spot welding and tacking, 2-stroke and 4-stroke mode depending on torch trigger operation, manual metal arc welding often with MMA pulse automatic also integrated, gas pre-flow and post-flow times adjustable, upslope and downslope times also controllable, torch modes via torch trigger such as reduced secondary current, memory and job storage recurring welding tasks can be saved depending on version approx. 8-100 jobs, energy efficiency high efficiency, standby function available. Remote control and interfaces remote adjusters and functional torches can be connected, optional LAN WiFi gateway ewm Xnet, PC interfaces for parameter setting and monitoring. Very little used. An on-site inspection is possible. Lsdexdc Upspfx Anceaa

Condition: used, Year of construction: 2009, faceplate diameter 1800 mm swing diameter 2000 mm turning height 1500 mm Control SIEMENS 840 D workpiece weight max. 5000 kg ram head dimension 250 x 250 mm table turning speeds 1 - 320 U/min power capacity - table 100 kW Torque 31784 Nm total connected load 218 kW weight of the machine ca. 55 t Turning- and Boring heads: - 4 x Turning heads + steelholders - 3 x Turning heads for Capto - 1 x Boring head (driven) - 2 x angular boring heads (Manufacturer Benz) Dimensions: - Turning diameter on the faceplate 2000 mm - Faceplate diameter 1800 mm - Turning height with turning head L100 1500 mm Power on the ram: - Clamping force of tool holder or accessories 120,000 N - Max. Feed force Z and X axis 30,000 N - Drive power of the milling, drilling and grinding spindle 37 kW - Speeds for turning 10 - 3000 rpm Travels: - Axis X, horizontal support on the crossbeam -2270/+2275 mm - Axis Z, vertical support on crossbeam 1250 mm - Axis C, table rotation 360° Feed speeds: - Axis X 15,000 mm/min - Axis Z 15,000 mm/min - Axis C 3.25 rpm Coolant system: - Coolant system filter system 1500 l Chain tool magazine with 80 places: - max. tool weight 30 kg - Max. tool diameter with free auxiliary slots 250 mm Disk magazine with 12 slots: - max. weight of tool holders/accessory units 150 kg - max. length of tool holders 500 mm Ledjvylilepfx Ancjaa - max. magazine load 1000 kg Pallet changer with 2 pallets: - Pallet diameter 1800 mm - Pallet load capacity (centered) 5000 kg - Pallet load capacity (on center) 4000 kg Equipment / accessories: - 1x pallet with claw boxes, diameter 1800 mm - 1x hydraulic chuck with base jaws, diameter 1800 mm - Various drilling and milling heads - Various turning tool holders - 2x measuring probes

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Technical details Lajdsyzy Tyspfx Ancea faceplate diameter 1800 mm swing diameter 2000 mm turning height 1270 / 1120 mm Control SIEMENS 840 D workpiece weight max. 5000 kg ram head dimension 250 x 250 mm table turning speeds 1 - 320 U/min cross rail - adjustment 400 mm ram head - cross travel (X) -2770 / +2275 mm ram head - vertical travel (Z) 1250 mm c-axis 360° (0,001°) deg milling drive 37 kW turning speed range - milling 10 - 3000 U/min power capacity - table 100 kW Torque 31784 Nm feed range (X/Z) 0,1 - 15000 mm/min weight of the machine ca. 55 t Additional information Used CNC vertical lathe for turning, drilling and milling First machine installation in the year 2011. Max. workpiece diameter: 2040 mm Max. workpiece height: 1270 mm Ram stroke: 1250 mm Max. workpiece weight: 5000 kg (per pallet/chuck) Table speed range: 1.0 - 320 rpm Table drive motor: 100 kW Drilling and milling spindle: 37 kW Crossbar travel: 2 steps of 200 mm each Total electrical connection value: 218 kVA CNC control: Siemens 840 D Number of NC axes: 4 (X, Z, C, crossbar adjustment) Travels: X-axis: -1650 to + 2165 mm Z-axis: 1250 mm Rapid traverse X- Z-axis: 15 m/min Number of tool magazine spaces: 80 spaces in the chain magazine, of which 60 x HSK 100 and 20 x Capto C6 Disc magazine 12-pos. for rotary holders and attachment heads Coolant system with filter and circulation unit Chip conveyor Oil-mist-extractor 1 pallet with jaws, diameter 1800 mm 1 hydraulic chuck with base jaws, diameter 1800 mm Various drilling and milling heads 2 measuring probes Several turning tool holders Special feature: Pallet changer with two stations, equipped with a face plate Ø1800 mm and a six-jaw lever compensation chuck with mechanical centrifugal force compensation Ø1800 mm. Note: The machine is in a pit. Condition description: The cross roller bearing on the Carnaghi was replaced about half a year ago. The Siemens components in the control cabinet were also completely replaced at the end of 2023. The machine also has a measuring probe for tool measurement and an external Renishaw measuring probe for workpiece measurement. As a special feature, the machine also has a measuring probe installed on the Z-axis (Z1-axis). This brings an advantage in terms of accuracy and time, as the tool does not have to be put down for measuring. However, it is currently shut down and should be overhauled when it is put back into operation. The machine also has a Rotomors six-jaw lever compensating chuck with centrifugal force compensation, which was completely overhauled in 2020/21.

Condition: used, Spot welding machine, projection welding machine DALEX type PL 63 Serial No. N-0051390 Year of manufacture 2018 Output at 50% duty cycle: 63 kVA Output at 100% duty cycle: 44.5 kVA Maximum welding power: 182 kVA Rated welding current: 8.77 kA Throat depth: 250 - 550 mm Maximum arm spacing: 150 to (310 mm) Upper electrode arm diameter: 50 mm Lower electrode arm diameter: 60 mm Electrode holder diameter: 25 mm Electrode stroke max.: 65 mm Electrode force: 100 - 600 daN Operating air pressure: 1 to 6 bar Power supply: 400 Volt, 50 Hz Rated current: 158 A Connected load: 137 kVA - Thyristor power stage - Welding control HARMS+WENDE - HWH MPS 10β - 5-stage control, single spot, series spot, 8 programs - Electrode force infinitely adjustable via air pressure - Parallel electrode guidance - Single-stroke welding cylinder Ledsycv Saepfx Ancsaa - Water-cooled via external water cooling system (recirculating water cooler not included) - Electric foot switch - Control cabinet with controller fixed to machine - Operating manual Required space (L x W x H): 1150 x 700 x 1600 mm Weight: 335 kg As-new condition

Condition: used, AC Spot Welding Machine, Projection Welding Machine ARO Type MA 350 DC AC Resistance Welding Machine Mach. No. MA35031332 / 9731122B110 Year of Manufacture 1997 Power at 50% duty cycle: 30 kVA Power at 100% duty cycle: 21 kVA Maximum welding power: 156 kVA Thrust 550 mm Electrode arm diameter: 60 mm Laedpjhpf Iyjfx Ancoa Electrode holder diameter: 25 mm Cylinder stroke max. 80 mm Electrode force max. 730 daN (at 6 bar), continuously adjustable Operating air pressure 0.5 to 6 bar Mains connection 400 volts, 50 Hz Connected load 75 kVA / 63 amps / Cable cross-section 3x 16 mm² Maximum possible sheet pairing: 5 mm + 5 mm - ARO Micro welding control system 2X16 III Version 6Z2P Type 1B (6 times - 2 programs) - Continuous welding current adjustment via thyristor module - Parallel electrode guide - Double-stroke welding cylinder (pre-stroke / welding stroke) - Single-stroke and continuous spot welding modes - Electrode force continuously adjustable via air pressure - Water-cooled by external water cooling (water cooling unit not included) - Electric foot switch - Control cabinet with control system permanently mounted on the machine - PC interface RS 485 - Spot weld counter - Operating instructions for control system, spot welder, and electrical diagram included Space requirement: W x H x D 520 x 1550 x 1150 mm Weight: 290 kg Very good condition

Condition: used, Year of construction: 2003, functionality: unexamined, ABB IRB 1400 M2000 Robotic Welding Cell – Suitable for Parts or Refurbishment – Ireland Location: Ireland Condition: Used Power: 400V, 3 Phase Complete ABB robotic welding cell featuring an ABB IRB 1400 M2000 6-axis industrial robot with controller, teach pendant, dual-station welding fixture and full safety enclosure. Originally configured as a production robotic welding system (Plant Ref: XRWO11). This system is suitable for refurbishment, retrofit, or breaking for parts and spares. Can be sold complete or dismantled and sold separately. Included in Sale: • ABB IRB 1400 M2000 6-Axis Robot • ABB S4C+ Controller Cabinet (400V 3-Phase) • ABB Teach Pendant • Dual-Station Welding Fixture / Positioner • Robot Pedestal Base • Full Steel Safety Enclosure / Welding Booth Robot Specifications: Model: ABB IRB 1400 M2000 Axes: 6 Reach: Approx. 1.44m Payload: 5–6 kg Repeatability: ±0.05 mm Manufactured in Sweden System is complete as seen in photos. Industrial used condition. Operational status not confirmed. Ideal for buyers looking for spare parts including robot arm, controller, drives, teach pendant, servo motors, or welding fixtures. Ledsymd E Nspfx Ancjaa Components can be removed and sold individually if required. Forklift loading available. Inspection welcome by appointment. Asking Price: €11,200 + VAT (or nearest offer) Enquiries welcome for complete system or individual components.

Condition: good (used), MERKLE Insquare W 300 AC/DC lasapparaat met originele kabelset Primair: Spanning: 3 x 400 V Lsdpfx Anjl Sm Hbscoaa Frequentie: 50 (60) Hz Cos phi: 0,95 TIG DC stroombereik: Open circuit spanning: 80 V Werkspanning: 10-22,8 V Lasstroom: 5-320 A HSB 60% inschakelduur (10 min.) 320 A HSB 80% inschakelduur (10 min.) 300 A DB 100% inschakelduur: 260 A (40 °C) Primair continu vermogen: 9,5 kVA Primaire continue stroom: 13,7 A Primaire maximale stroom: 19 A TIG AC stroombereik: Open circuit spanning: 80 V Werkspanning: 10-22,8 V Lasstroom: 5-320 A HSB 60% inschakelduur (10 min.) 320 A HSB 80% inschakelduur (10 min.) 300 A DB 100% inschakelduur: 260 A (40 °C) Primair continu vermogen: 9,5 kVA Primaire continue stroom: 13,7 A Primaire piekstroom: 19 A MMA-lassen: Stick-elektroden: 1,5-6 mm Open spanning: 80 V Werkspanning: 20-32,8 V Lasstroom: 5-320 A HSB 60% inschakelduur (10 min.) 320 A HSB 80% inschakelduur (10 min.) 300 A DB 100% inschakelduur: 260 A (40 °C) Primair continu vermogen: 13,1 kVA Primaire continue stroom: 19 A Primaire piekstroom: 22 A Lasproces: 10-standenschakelaar: TIG DC Min, TIG DC Plus, TIG DC Min met startpuls, TIG AC Geluidsarm, TIG AC Blokgolf TIG AC "Gebalanceerde TIG", Elektrode Min Elektrode Plus Elektrode "Sinusgolf" Elektrode Blokgolf Keuzeschakelaar 1: 10-standenschakelaar: Stroom 1, Tijd 1, Stijg- en daaltijd, Startstroom, Eindstroom, Ontstekingspuls, Punttijd, Gasvoor- en nastroomtijd Keuzeschakelaar 2: 9-standenschakelaar: Stroom 2, Tijd 2 (voor pulsmodus), AC Balans, AC Frequentie, Hotstarttijd en -stroom, Stroominstelling, Elektrode d, Display U Instellingen: 2 draaiknoppen voor keuzeschakelaars 1 en 2 Displays: 2 LED-displays met voorloop- en hold-functie voor stroom, spanning, tijd Tijdfuncties: 4-standenschakelaar: UIT, langzame puls, snelle puls, puntlassen Ontsteking: 4-standenschakelaar: UIT, hoogfrequent, Lift-Tig Energieregeling: 4-standenschakelaar: op het systeem, hand- of voetafstandsbediening, lastoorts Bedrijfsmodus: 4-standenschakelaar: 2-takt, 4-takt, 4-takt met 2 stromen, gastest, test, programma Programmageheugen: 20 vrij toewijsbare geheugenplaatsen AC-frequentie: 50-200 Hz AC-balans: 9-91% Gasvoorstroomtijd: 0-3 s Gasnastroomtijd: 0-25 s Stroomstijgingstijd: 0-2 s Stroomdalingstijd: 0-20 s Ontstekingspuls: 0-100 ms Puntlastijd: 0,1-2,5 s Langzame pulsen: 10 ms-2,5 s Snelle pulsen: 50 Hz-5 kHz Hotstarttijd: 0-1,5 s Hotstartstroom: 10-200% Stroominstelling: 100-250% Knop: Testbeveiliging Knop: Programmaselectie LED: Netspanning AAN, Overtemperatuur, Storing, Beveiligingscircuit, Display hold, Startstroom Stijging, Stroom 1, Stroom 2, Reductie, Eindstroom Stroombron: IGBT-omvormer Ontsteking: Hoogfrequent of Lift-Tig Norm: EN 60974-1 "S" / CE Toortsaansluiting: EURO-centrale aansluiting met 5-polige stekker Toortskoeling: Watergekoeld koelsysteem 50 mm² aansluiting: Werkstukkabel 50 mm² aansluiting: Elektrodelaskabel Netaansluiting: 4 x 4 mm², 5 m lang Gasaansluitslang: 2 m Gewicht: 130 kg (300 AC/DC) Afmetingen L x B x H: 910 x 600 x 910 mm met gasfleshouder Gasfleshouder: 10 - 20 - 50 l gasfles Financing through our bank is also possible. komplett-konzept.leasingo.de Vind meer artikelen - nieuw en gebruikt - in onze shop! Internationale verzendkosten op aanvraag!

Condition: used, TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -Manufacturer: Ess, TIG and hand electrode welding machine, water-cooled -Type: THYROARC 3 AC/DC direct/alternating current -incl.: ground cable, gas fitting, hose package 7500 mm long -Welding power: max. 280 A, see nameplate Ledpfx Ansfwg H Hscoaa -Dimension: 1300/570/H900 mm -Weight: 262kg

Condition: used, machine/vehicle number: 097 - 004886-25012, wire diameter 1.2 mm weight 232 kg Lajdpfxjtyq E Aj Ancoa unalloyed solid wire electrode - copper-plated extremely low spatter in all power ranges optimal for automated welding

Condition: not inspected (used), functionality: unexamined, overall weight: 500 kg, total height: 1,700 mm, total length: 2,000 mm, total width: 1,500 mm, No minimum price – guaranteed sale to the highest bidder! Bidding obliges the winner to collect the machine within the specified timeframe: between 23/06/2026 and 26/06/2026! Auction of a thread rolling machine including vibratory feeder! MACHINE DETAILS Operating voltage: 380 V Control voltage: 220 V Dimensions & Weight Dimensions (L x W x H): 2,000 x 1,500 x 1,700 mm Weight: 500 kg EQUIPMENT For knurling of pins Laodpfx Asy D Sy Djncoa Vibratory feeder External reference: 38

Condition: used, Equipment: type plate available, Powerful TIG Welding Unit for Professionals The EWM TIG 350 DC FWD is a high-quality, water-cooled DC TIG welding unit from EWM, engineered for demanding applications in metal construction, industry, and professional workshop environments. This high-performance machine enables precise DC TIG welding with up to 350 A welding current and offers superior arc stability, high weld quality, and efficient cooling – ideal for steel, stainless steel, nickel alloys, copper materials, and other metal workpieces. 🔧 Welding Performance and Technology Direct current TIG welding (DC) with an adjustable range up to approximately 350 A – powerful penetration and precise control. Robust inverter electronics ensure stable arc performance and high efficiency. The water-cooled design allows continuous operation even under heavy-duty conditions. ⚙️ Features and Operator Comfort Proven operation with an intuitive control panel – easy adjustment of welding parameters. Lodpfjyililex Ancsaa Connection options for remote control and torch functions for added convenience. Splash-proof housing rated to IP23, suitable for tough workshop environments. Energy-efficient operation thanks to high efficiency and standby function. Dimensions: 1000 x 520 x 900 mm Weight: approx. 180kg All information subject to change or errors.

Condition: ready for operation (used), Panasonic Panadac 337N-01 Pulse Motor Driver, serial no. according to photo, used, normal traces of use, 100% functional, scope of delivery according to photos Lodpfei Eccmjx Anceaa

Condition: ready for operation (used), Panasonic Panadac 337N-02 Pulse Motor Driver, serial no. according to photo, used, normal traces of use, 100% functional, scope of delivery according to photos Ledpji Eccqjfx Anceaa

Condition: ready for operation (used), Indramat MAC 112D-0-ED-2-C/130-B-1/S005 permanent magnet - three-phase servo motor, SN:68352, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery according to photos,For this item, the agreed sales discounts do not apply. Price please enquire separately!,ATTENTION: Costs for packing and shipping please enquire separately! ATTENTION: Please enquire for charges for packing and transport separately! Lajdpfxoi D Ii Ij Ancoa

Condition: as good as new (ex-display), Fronius TPS 4000 CMT ✅ Scope of delivery: ➤Fronius TPS 4000 CMT power source ➤Fronius FK 4000 ➤Fronius VR 7000 CMT wire feeder ➤Fronius Robacta CMT hose package or CMT hand hose package ➤Fronius intermediate hose package ~1.5m ➤Fronius RCU 5000i ➤Fronius Interbus Rugged Line interface ➤Ground cable 3-4m ➤Pressure regulator from Messer (new) The prices listed start at ... euros. Prices/offers are customized based on the device configuration. CMT (Cold Metal Transfer) technology is particularly known for its high precision and flexibility when welding thin materials and delicate components. Unlike traditional MIG/MAG welding processes, CMT uses a controlled, pulsating wire feed, which transfers the welding wire very precisely into the weld pool. This minimizes spatter, enables excellent heat input control, and reduces distortion and discoloration of the material. We always have several machines in stock in different versions. Ask for a personalized configuration / additional options. ---- AVAILABLE FOR IMMEDIATE DELIVERY PROPER INVOICE A viewing is possible in Vienna, Austria! ✔ Insured shipping on a pallet is no problem! ✔ Lodpfxswbixrj Ancsaa ✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the machines? ►►► To explain, we buy like-new used devices, disassemble them, inspect everything, replace any worn parts if necessary, and only then, after successful test welding, is the device released for sale. "All" devices are clean and have neither burn holes in the displays nor countless burn holes or dents scattered throughout the device! You're buying an item from us that's ⭐worth seeing and doesn't look completely finished! ►►►Do we receive an invoice when you purchase from us? Yes, you receive a proper invoice from us. If you have a valid VAT ID, we can issue a net invoice if the requirements for intra-community delivery within the EU are met. ►►►What payment options are available? Prepayment or cash upon personal pickup ►►►Is insured shipping possible? Yes, we will be happy to send you the purchased set, well packaged and insured, on a Euro pallet. ►►► ►►►Is there a warranty? We sell the machines at one-third the original price and unfortunately don't have the flexibility to offer a warranty. You are welcome to test the devices on-site and pay in cash. ►►►Why buy from us? We are experts in this Fronius welding machine series and always have 60-80 devices in stock – exclusively Fronius, no other manufacturers! We are experts in these devices and don't sell anything we don't know about.

Condition: good (used), mileage: 106,096 km, power: 130 kW (176.75 HP), first registration: 05/2018, fuel type: diesel, tire size: 235/65R16, axle configuration: 4x2, wheelbase: 4,490 mm, fuel: diesel, color: grey, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: other, number of seats: 3, total length: 7,000 mm, total width: 2,050 mm, total height: 2,600 mm, loading space length: 4,100 mm, loading space width: 1,770 mm, loading space height: 1,930 mm, Year of construction: 2018, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, electric window regulation, navigation system, power mirror, traction control, trailer coupling, = Additional Options and Equipment = - Heated mirrors - None - Manual - Radio/Cassette - Reversing camera - Partition wall - Xenon lamp = Notes = Lsdpfx Asy A D Ttjncjaa Configuration: 4x2, Curb weight: 2,314 kg, Gross weight: 3,500 kg, Tow hitch, Cabin type: Single cab, Air conditioning, Number of airbags: 2, Parking aid: None, Power windows, Electric mirrors, Partition wall, Radio/cassette, CarPlay, GPS navigation, Color: Grey, Metallic, Heated mirrors, Reversing camera, Lighting type: Xenon lamp, Bluetooth, Engine power: 130 kW (174 hp), Fuel: Diesel, Euro: 6, Drive technology: Timing belt, Transmission type: Manual, Gears: 6, Power steering, ABS, ASR, Starter battery, Body type: additionally raised and extended, Sidewall cladded, Rear step, Roof rack: None, Side doors: 1, Side windows: 1, Rear closure: Double door, Central locking, Seats: 3, Seating arrangement: 1+2, Seat upholstery: Leather, Seat adjustment: Manual, ac EURO6 rear-wheel drive 3,500 kg tow bar LED, Spare wheel = Further Information = General Information Number of doors: 1 Registration number: KLEYN1 Axle Configuration Tyre size: 235/65R16 Brakes: Disc brakes Axle 1: Tyre tread left: 4 mm; Tyre tread right: 3 mm; Suspension: Coil spring Axle 2: Tyre tread left: 5 mm; Tyre tread right: 6 mm; Suspension: Leaf spring Weights Empty weight: 2,314 kg Payload: 1,186 kg Gross vehicle weight: 3,500 kg Functionality Loading platform height: 60 cm Interior Upholstery: Leather Condition Technical condition: Good Optical condition: Good Damages: None Number of keys: 2 Financial Information Lease price: €326 per month (panel van, 72 months); Please ask for further information and conditions