Used Uteco Crystal 808 for sale (319)

Condition: good (used), Year of construction: 2019, Max. printing width 1500 mm Print repeat length (min. – max.) 400 – 850 mm Machine speed 500 m/min max Type of inks: Solvent based inks Material to be printed PP 10 um-200 µm BOPP 10 um-60 µm LDPE 20 um-200 µm Hnedevakdzspfx Ag Iol CPP 20 um-70 µm HDPE 15 um-150 µm PET 12 um-50 µm OPA 15 um-50 µm Machine power supply 400V Turret unwinder TAU-N 1000 Max reel diametr shaft 1 - 1000 mm Max reel diametr shaft 2 - 640 mm ( with max reel on shaft 1) Max reel diametr with 2 alike reels on shafts 1 and 2 – 810 mm Pneumatic dancing roller Turret rewinder TAR-N 1000 Max reel diametr shaft 1 - 1000 mm Max reel diametr shaft 2 - 510 mm ( with max reel on shaft 1) Max reel diametr with 2 alike reels on shafts 1 and 2 – 740 mm Pneumatic expansible shaft , I.D. 76 mm, 152 mm Antistatic bars ACE Blade slitting device Longitudinal blade slitting device, composed of 2 blades for side slits, complete with supports. Trim exhauster Noise-insulated trim exhaust device which consists of an electroblowing fan, Venturi pipe and trims collectio pipes with two exhausting nozzles. Edge guide OPG, electromechanical type, with single ultrasonic sensor, manually adjustable, to guide the edge of the web. Edge guide Kamberoller, electromechanical type, with single ultrasonic sensor, adjustable by motor Corona treating system Ferrarini&Benelli Reprint system, on the front or back side of the printed material Centralized manual (grease ) lubrication of CI drum bearings Hastelloy coated central drum Color unit opening: controls on external color units and internal color units Printing pressures adjustment The automatic system P2P allows to compensate the decrease of either the printing pressure and the colour density pressure, at machine speed increases Throw off( delayed impression release) Automatic, horizontal and activated by the same four motors moving the colour unit Printing units positioning Touch&Go It is a function which perfoms a sequence of “pre-defined” positions of the plate and anilox axis through the printing unit positioning system. Plate cylinders adjustment Tune&go It is an automatic tuning software which detects the best configuration for the adjustment of the plate cylinder, automatically modifying the control system according to the different types of plate. Pre-Register automatic print-to-print regiser pre-set “G” (Gearless) The term "Print-to-print register pre-set" is understood as the procedure used to position the printing plate cylinders on the press in phase one with the other as to achieve a printing register starting with a tolerance limit± 2 mm. Computer control The system is composed of an industrial computer equipped with a 19" SXGA TFT Single-touch IP65 L SVGA monitor Inking and washing system for anilox rolls and doctor blades Viscosimeter Gama G 26 Inks cooling and temperature control system with bank heat exchangers and regulation valves. Drying system Hot air gas burner with heating capacity up to approx. 150.000 Kcal/h ( BTU), composed of a burner installed inside the main air duct, complete with fan for combustion air, regulatory and safety devices. The exact heating capacity will be communicated during the completion of the machine. Infrared LEL monitoring system MSA Web Inpection Progress 500 Grafikontrol

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, working width: 1,200 mm, Uteco Platinum 808 stack flexo printer 8 colors: 4+4 Material width max. 1250mm Printing width max. 1200mm Print repeat min/max 300/1200mm Hsdpfoyxm Ifox Ag Isnl Includes 82 printing cylinders

Condition: excellent (used), Year of construction: 2014, Offer for flexo press UTECO ONYX 808 gearless, 8 colors, year 2014 and 1280 mm width. Fully equipped. Hjdexf T Hljpfx Ag Ienl

Condition: excellent (used), Year of construction: 2008, Offer for Gearless Flexo UTECO ONYX 876 with 8 colors, year 2007, and 1200 mm width. Fully equipped, can be seen in operation here in Europe. Hnsdpoxf Nynofx Ag Isl

Condition: new, Heidenhain ROD 1020 2500 01-03 rotary encoder. 322 808-24 Serial number: 8196365A, unused, 100% functional, scope of delivery as shown in photos. Hnsdpfjy Nqnwsx Ag Iol

Condition: new, Heidenhain ROD 1020 2500 01-03 rotary encoder. 322 808-24 Serial number: 8178784A, unused, 100% functional, scope of delivery as per photos. Hnedpsy Nqnkjfx Ag Isl

Condition: new, Heidenhain ROD 1020 2500 01-03 rotary encoder. 322 808-24 Serial number: 8196363A, unused, 100% functional, scope of delivery as shown in photos. Hodpfx Aoy Nqnqog Ionl

Year of construction: 2022, condition: good (used), functionality: fully functional, We are selling our Montana Crystal Rock due to upgrading to a Wintersteiger Jupiter. Hodpoyuayfjfx Ag Ijnl

Condition: used, Year of construction: 1983, functionality: fully functional, Atlas Copco Industrial Screw Compressor – 75 kW – 7.5 m³/min – 8 bar Available: Atlas Copco GA Series industrial screw compressor, a professional machine designed for continuous operation in demanding industrial environments. The compressor is mounted in a soundproofed enclosure with hinged access panels for easy maintenance and inspection. A robust and reliable unit, true to Atlas Copco’s industrial standards, ideal for manufacturing plants, workshops, and compressed air stations. Technical specifications: - Manufacturer: Atlas Copco - Model: Oil-lubricated rotary screw compressor Hodeytgrfspfx Ag Ienl - Motor power: 75 kW - Voltage: 400 V - Current: 157 A - Motor speed: 1460 rpm - Operating pressure: 8 bar - Air delivery: 7,500 l/min (7.5 m³/min) - Year of manufacture: 1983 Features and equipment: - Integrated air/oil separator - Air receiver and auxiliary components included - Soundproofed cabinet - Complete turn-key compressed air unit

Condition: good (used), Year of construction: 1998, Stitching, folding and cutting machine, Theisen Bonitz TB Sprint 808 08, machine number: 303QS2198, year of manufacture: 1998, 2 Hohner stitching heads, front trim, in good condition, available immediately. Hsdox S Iwzspfx Ag Ienl

Condition: excellent (used), Here we offer an inspection device for crystal silicon solar modules. Reliable quality assurance & process control during the entire solar module production The Dr. Schenk solarInspect series was developed to meet the special requirements in the production of crystal silicon solar modules. Hjdpfxjd N Erve Ag Ijnl These ready-to-use Vision Systems provide reliable quality control for the entire ongoing production process. In addition, in the event of process deviations, continuous monitoring of the production process can be corrective action in good time. In the production of crystal silicon solar modules, structural glass substrates are used instead of uncoated glass. Structural glass increases the permeability of sunlight. The optical signals in the vision system, which are characterized by the surface structure, which is usually used for glass substrates of silicone solar modules, are often similar to, or even stronger than, the error actually inspected. With SolarInspect, Dr. Schenk has developed and manufactured a system that aims to distinguish between glass structure and and errors on the entire material surface, including the edges. Thanks to an innovative optical design, Dr. Schenk's inspection system can clearly detect the glass defects and distinguish them from the glass structure. Reliable inspection of - uncoated input glass -

Condition: ready for operation (used), Supfina 808-261 tool spindle with tool holder, used, good condition, 100% functional, scope of delivery as per photos Hodpexah Rbefx Ag Ijnl

Condition: ready for operation (used), Supfina 808-262 carriage unit with base plate, used, in good condition, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire for charges for packing and transport separately! Hsdpfxjxah Rhe Ag Isnl

Condition: good (used), Crystallizer for PET recycling Year: 2008 Hodpfx Agenxkd Is Ionl

Condition: new, Protection level 4 - 12 M Hnodogu Ey Hspfx Ag Isl Power supply 2 x CR2032 weight 460 Gramm dimensions 250 x 270 x 230 mm

Condition: excellent (used), functionality: fully functional, mileage: 58,000 km, power: 130 kW (176.75 HP), first registration: 07/2017, fuel type: diesel, overall weight: 7,490 kg, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: air, loading space length: 6,070 mm, loading space width: 2,485 mm, loading space height: 2,530 mm, Year of construction: 2017, Equipment: air conditioning, cruise control, tail-lift, trailer coupling, Tow hitch SÖRENSEN tail lift 1000 kg Pre-installation for toll system ISRI comfort suspension seat with seat heating, armrests on both sides Total of 3 seats Main tank 120 l AdBlue tank 25 l Hodpfx Agowt Ahwo Ionl Reversing warning system combined with hazard warning lights

Condition: used, Year of construction: 2021, operating hours: 91 h, machine/vehicle number: 0775400100M10007, Drive: Wheel Empty weight: 2.090 kg Lifting capacity: 230 kg Working height: 1.000 cm Hedpfx Agjtr Nrne Ionl Transport dimensions (LxWxH): 2.49x0.81x2.35 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2021, operating hours: 103 h, machine/vehicle number: 0775400100M010026, Drive: Wheel Hedpotr Nzhofx Ag Ienl Empty weight: 2.090 kg Lifting capacity: 230 kg Working height: 1.000 cm Transport dimensions (LxWxH): 2.49x0.81x2.35 Please contact PFEIFER GROUP for more information

Year of construction: 2024, condition: new, Everything is configurable on demand, very short production & delivery time. We will be happy to provide you with further information on request. Technical data on request. Standard equipment Y1, Y2, X, R - 4 axes Control unit - CNC ModEva15T Servo motor backgauge & linear guided ball screw system (X-R) CNC Crowning European type tool clamping system Movable support arms (with T-slot and stopper) Hnjdpfx Aefiryfog Iel Specially designed hydraulic block and valves according to worldwide standard electrical equipment according to worldwide standard Optional equipment Control unit - ModEva Premium , 69T and 66T CE Manuel F. AKAS II M FPSC-B-C + safety covers with switch CE F. AKAS-LC II AKAS-3 M Motorised + FPSC (Safety PLC) CE BLVT safety - only for tandem machines Z1, Z2 Axes X1, X2 Axes R1, R2 Axles Delta X axis, +/- 250mm stroke or +/- 125mm CNC controlled X axis = 1000 mm - rear protection with light barrier AP3-AP4 Bending aid Height-adjustable laser angle measurement system Quick clamping system Hydraulic and pneumatic tool clamping system Upper and lower tool Lower tool positioning system Parking area Central lubrication system Oil cooler Additional stop finger and additional movable support arms Special packaging for overseas transports

Condition: new, Everything is configurable on demand, very short production & delivery time. We will be happy to provide you with further information on request. Technical data on request. Standard equipment Y1, Y2, X (3-axis) Hnjdpofiqa Rofx Ag Iol Y1, Y2, X = 650 mm (double guide, aluminium) Software D-BEND for 3D bending simulation and alignment Manual crowning R axis, manual Backgauge with motor, linear guide and ball screw Backgauge with height adjustment (R-axis, manual) CE-die holding system (upper dies) Front support arms for sheets, sliding (with T-channel and stops) Hydraulic blocks and valves in special design, according to the worldwide applicable standards Electrical equipment, in accordance with the standards applicable worldwide Optional extras: Software D-BEND for 3D bending simulation and alignment R axis CNC (X = 650mm), X, R (double guide, aluminium) Upper dies, CE Lower dies, CE Lower dies, DURMA company Fast die locking system CNC-controlled crowning, with motor Backgauge (1000 mm) - Rear guard with light barrier Oil cooler Additional stop finger and additional front support system Sheets, sliding Special Overseas Packaging 8 meter press brake 800 tons. With more than 60 years of experience in research and production of machines for sheet metal working, 8,000 machines produced annually in three technologically advanced production facilities covering a total area of 150,000 m², the Durmazlar Group and its DURMA Maschi

Condition: ready for operation (used), ABM Greiffenberger ZBF12NHR-S0 / G80F / 4D808-4 geared motor, serial number: 191378798 / brake TS 10.00 Nm 230V~ 0.26A, used, good condition, fully functional, delivery as per photos. Hodpsy Sdrhefx Ag Ienl

Condition: excellent (used), Year of construction: 2018, conveyor belt length: 4,000 mm, conveyor belt width: 2,000 mm, total length: 4,000 mm, total width: 2,000 mm, total height: 650 mm, overall weight: 6,000 kg, Platform height: 650mm Platform length: 4000mm Platform width: 2000mm Max. loading capacity:60T Number of axes: 4 Number of wheels: 32 Wheel Ø: 425mm Length: 4000mm Width: 2000mm Height: 650mm Weight: 6000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Hnsdpfxoyh H Sfe Ag Iol

Condition: new, Year of construction: 2026, CNC Machining Centers MILL 530 – Reliability and Precision Combined CNC machining centers MILL 530 are industrial machines that combine reliability and precision in a single solution. Thanks to their robust construction and proven components, these machines are ideal for demanding industrial applications. The massive machine frame ensures stability and machining accuracy, while the fully enclosed working chamber keeps the workspace clean and safe. The hardened worktable surface is gentle on machined parts, and the efficient cooling system provides optimal cutting conditions. Choose the MILL 530 to ensure the highest quality and efficiency in your production. MILL 530 Machining Center – Precision and Efficiency in CNC Machining The MILL 530 machining center is an advanced vertical CNC machining center designed for precise metal machining in manufacturing plants. Equipped with modern technologies and a solid construction, it ensures reliability and high performance in a wide range of industrial applications. Technical Specifications Travel Range X-axis: 450 mm Y-axis: 340 mm Z-axis: 400 mm Distance from spindle nose to worktable: 10–470 mm Distance from spindle center to column guideway: 350 mm Feed Rates Rapid traverse X-axis | power | torque: 14 m/min | 1 kW | 4.78 Nm Rapid traverse Y-axis | power | torque: 14 m/min | 1 kW | 4.78 Nm Rapid traverse Z-axis | power | torque: 11 m/min | 1.75 kW | 8.36 Nm Worktable Table size: 900 × 400 mm T-slots: 4 × 14 mm Spindle Spindle speed: 100–8,000 rpm (optional 10,000 rpm) Hnjdpfjyb Nc Nex Ag Iol Spindle taper: BT40 Coolant pump: 480 W; 2.5–3.3 m³/h Main motor power: 3.7 kW Tool Magazine Max. tool diameter: 100 mm Max. tool length: 300 mm Max. tool weight: 7 kg Tool change time: 2–5 s Other Parameters Positioning accuracy: 0.01 mm Dimensions (L × W × H): 2100 × 2250 × 2600 mm Weight: 1800 kg Standard Equipment SIEMENS SINUMERIK 808 Advanced control system 8,000 rpm spindle 16-tool magazine Three-color alarm lights Work lighting Closed coolant system Fully enclosed machine housing Automatic lubrication system Pneumatic system Siemens Sinumerik 808D – Compact CNC Control for Basic Applications The Siemens Sinumerik 808D is an economical CNC control designed for entry-level lathes and milling machines, ideal for small and medium-sized workshops. Its key features include: Intuitive operation: Graphical interface and Teach-In function simplify programming and significantly reduce operator training time. High reliability: Robust design resistant to dust and moisture, ensuring stable operation in workshop environments. Compatibility: Designed for machines with standard requirements, with easy integration of SIEMENS servo drives. Cost optimization: Low energy consumption and minimal service requirements, making it ideal for beginner CNC users.

Condition: new, Year of construction: 2026, CNC Machining Centers MILL 530 – Reliability and Precision Combined CNC machining centers MILL 530 are industrial machines that combine reliability and precision in a single solution. Thanks to their robust construction and proven components, these machines are ideal for demanding industrial applications. The massive machine frame ensures stability and machining accuracy, while the fully enclosed working chamber keeps the workspace clean and safe. The hardened worktable surface is gentle on machined parts, and the efficient cooling system provides optimal cutting conditions. Choose the MILL 530 to ensure the highest quality and efficiency in your production. MILL 530 Machining Center – Precision and Efficiency in CNC Machining The MILL 530 machining center is an advanced vertical CNC machining center designed for precise metal machining in manufacturing plants. Equipped with modern technologies and a solid construction, it ensures reliability and high performance in a wide range of industrial applications. Technical Specifications Travel Range X-axis: 450 mm Y-axis: 340 mm Z-axis: 400 mm Distance from spindle nose to worktable: 10–470 mm Distance from spindle center to column guideway: 350 mm Feed Rates Rapid traverse X-axis | power | torque: 14 m/min | 1 kW | 4.78 Nm Rapid traverse Y-axis | power | torque: 14 m/min | 1 kW | 4.78 Nm Rapid traverse Z-axis | power | torque: 11 m/min | 1.75 kW | 8.36 Nm Worktable Table size: 900 × 400 mm T-slots: 4 × 14 mm Spindle Spindle speed: 100–8,000 rpm (optional 10,000 rpm) Spindle taper: BT40 Coolant pump: 480 W; 2.5–3.3 m³/h Main motor power: 3.7 kW Tool Magazine Max. tool diameter: 100 mm Max. tool length: 300 mm Max. tool weight: 7 kg Tool change time: 2–5 s Other Parameters Positioning accuracy: 0.01 mm Dimensions (L × W × H): 2100 × 2250 × 2600 mm Weight: 1800 kg Standard Equipment SIEMENS SINUMERIK 808 Advanced control system 8,000 rpm spindle 16-tool magazine Three-color alarm lights Work lighting Closed coolant system Fully enclosed machine housing Hnjdpfxoyb D Dbe Ag Iol Automatic lubrication system Pneumatic system Siemens Sinumerik 808D – Compact CNC Control for Basic Applications The Siemens Sinumerik 808D is an economical CNC control designed for entry-level lathes and milling machines, ideal for small and medium-sized workshops. Its key features include: Intuitive operation: Graphical interface and Teach-In function simplify programming and significantly reduce operator training time. High reliability: Robust design resistant to dust and moisture, ensuring stable operation in workshop environments. Compatibility: Designed for machines with standard requirements, with easy integration of SIEMENS servo drives. Cost optimization: Low energy consumption and minimal service requirements, making it ideal for beginner CNC users.

Condition: new, Year of construction: 2026, machine/vehicle number: 20241119016, fuel type: diesel, motor manufacturer: Perkins 1106A-70TAG3, General information Field of application: Construction Weights Empty weight: 2.025 kg Functional Generator capacity: 200 kVA Dimensions of cargo space: 331 x 113 x 160 cm CE mark: yes Other information Fuel consumption: 31.8 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A44L Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 224 l Production country: CN Additional information Please contact Team DPX for more information Hjdpfx Agjyy H U Io Ionl = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank