Used Uhde Vibrating Motor Vibrator Motor Vibrator for sale (25,484)

Condition: good (used), vibrating motor for sale Manufacturer: UHDE sm160/6 power 6kw shaking force: ca 12000kg revolution: 980 rpm Csdpfx Asftu Tmofgehc 3 phases 380/220V 50Hz 15A protection: IP54 Weight: approx. 520 kg length: 850mm width: 550mm height: 500mm ​

Condition: ready for operation (used), * Type: vibration * 1x: AT – 1.8 kW – 1420 Rpm. * 2x: BMV – 7.6 kW – 1000 Rpm. * 1x: JVM – 3.91 kW – 1000 Rpm. (2023) * 2x: Friedrich – 8 kW – 980 Rpm. * 2x: Friedrich – 1,1 kW – 1450 Rpm. * 2x: Friedrich – 4 kW – 1000 Rpm. * 1x: Friedrich – 4 kW – 980 Rpm. * 1x: Friedrich – 5 kW – 980 Rpm. * 1x: Friedrich – 1,7 kW – 980 Rpm. * 2x: Friedrich – 2,7 kW – 980 Rpm. Chodpfx Afeywm E Iogoc * 2x: Friedrich – 7 kW – 1450 Rpm.

Year of construction: 2026, condition: new, functionality: fully functional, Vibrating screens are used in crushing and screening plant to separate end products of various sizes. When the material is poured into the screen, the smaller ones pass through the screen surface. Vibrating screens are produced in two, three and four decks and in various sizes. The vibration system can be in the middle or above the screen body. It is obtained by rotating the eccentric weights connected to the shaft, which are mounted on the screen body. Screen body sits on fixed or mobile chassis with heavy type helical springs that absorb vibration. The vibration systems of these vibrating screens are operated by belt-pulley transmission with an electric motor. Horizontal screens, which are capable of better-quality screening, are driven by a double drive center. • Model: FABO HTE-2260 • Type: Horizontal Vibrating Screen • Size: 2200 x 6000 mm • Deck size: 2-3-4 • Motor: 2 x 30 kW • Bearings: Heavy duty SKF-FAG • Capacity: 250-370 TPH Csdpfozz R D Tjx Afgjhc • Including chassis, motor and safety guards. Depending on its size, it has a screening capacity in the range of 250-370 tons per hour.

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 1873778, pressure: 4,000 bar, overall weight: 1,055 kg, Manufacturer: Uhde High Pressure Technologies GmbH Type: HPS 4022 Year of manufacture: 2015 Csdpfx Aezz Achsfgjhc Motor power: 22 kW Stroke length: 182 mm Plunger diameter: 19 mm Maximum flow rate: 2.3 l/min at 4000 bar

Condition: used, Vibrating motor , Unbalance motor IFE 4.9 kW Vibrating motor, IFE (Invicta) – 4.9 kW, Used machine Manufacturer: IFE Aufbereitungstechnik / Knorr-Bremse GmbH Division IFE (Made in Austria) Type: LM882T Serial number: 227308 Year of construction: 2003 (November) Power output: 4.9 kW (4900 W) Speed: 720 rpm Supply voltage: Three-phase (400V Y, 50 Hz) Current consumption: 13.3 A Power factor (cos φ): 0.55 Cjdpfozruh Dsx Afgehc Protection class: IP 66 Insulation class (I.Cl.): F Weight: 484 kg

Year of construction: 2026, condition: new, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Heavy Duty Type Inclined Vibrating Screens are designed for the classification of all kind of materials such as medium size aggregates and finished products. • Model: FABO TE-2060 • Type: Vibrating Screen • Size: 2000 x 6000 mm • Deck size: 2-3-4 • Motor: 22 kW Bearings: Heavy duty SKF-FAG • Capacity: 180-220 TPH • Including chassis, motor and safety guards. Chodpfozz R E Rsx Afgjc FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Year of construction: 2026, condition: new, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Heavy Duty Type Inclined Vibrating Screens are designed for the classification of all kind of materials such as medium size aggregates and finished products. • Model: FABO TE-1650 • Type: Vibrating Screen • Size: 1600 x 5000 mm • Deck size: 2-3-4 Cedpfjzzzn Nex Afgshc • Motor: 15-18,5 kW Bearings: Heavy duty SKF-FAG • Capacity: 100-130 TPH • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: good (used), Year of construction: 2021, Electric motor, three-phase motor, vibration motor, industrial vibration motor, roller vibrator, unbalanced motor, vibration motor, shaking motor, vibrator -Manufacturer: OLI MVE, Electric Vibration Motor Cjdezlqwuepfx Afgohc -Type: MVE 1400/15E-60A0 -Power: 0.70 kW -Speed: 1500 rpm -Protection class: IP66 EX -Number: 3 vibration motors available -Price: per piece -Dimensions: 330/175/H195 mm -Weight: 63.3 kg

Condition: new, Year of construction: 2017, Vibration motor, vibrator motor, oscillating motor, unbalanced motor, shaking motor Friedrich, Type: F 4000-8-9.0 Max. force: 120,000 N Codpfxogt Awzo Afgohc Rotational speed: 740/min Power consumption: 7 kW Dimensions: 1130 x 450 x 465 (L x W x H) Weight: 600 kg

Condition: new, functionality: fully functional, Year of construction: 2026, CONSTMACH vibrating feeder bunkers are high-efficiency equipment designed to ensure continuous and balanced feeding of crushers in stone crushing and screening plants. These bunkers are placed in front of primary impact crushers or jaw crushers to ensure a homogeneous flow of material. This increases the capacity of the crushers, balances the loads on the intermediate crushers, and ensures continuity in the overall production line. The vibrating feeding system prevents sudden loads, eliminating the risk of overloading on conveyor belts and thermal damage to equipment. Thanks to CONSTMACH's special design, the vibrations in the bunkers are smooth and balanced. This ensures both a steady material flow and extended machine life. Otherwise, uneven feeding could cause serious wear on crusher hammers, conveyor belts, and bearings. Using a vibrating feeder bunker helps reduce maintenance costs, increase operational efficiency, and maintain long-term performance throughout the facility. Vibrating Feeder Bunker Technical Specifications Model: CPG - 09 Body Size: 2,500 x 520 mm Grid Size: 820 mm Motor Power: 2 x 3 kW Bunker Volume: 8 - 10 - 15 m³ Capacity: 80 - 100 t/h Weight: 8,000 kg Model: CPG - 10 Body Size: 3,000 x 850 mm Grating Size: 1,160 mm Motor Power: 2 x 4.5 kW Hopper Capacity: 10 - 15 - 20 m³ Capacity: 150 - 200 t/h Weight: 12,000 kg Model: CPG - 11 Codpsxqf Sdefx Afgshc Body Dimensions: 4,600 x 1,100 mm Grate Dimensions: 1,400 mm Motor Power: 2 x 9.2 kW Bunker Volume: 15 - 20 - 30 m³ Capacity: 200 - 300 t/h Weight: 18,000 kg Model: CPG - 13 Body Size: 4,880 x 1,370 mm Grating Size: 1,840 mm Motor Power: 2 x 11 kW Bunker Volume: 30 - 45 - 50 m³ Capacity: 350 - 500 t/h Weight: 26,000 kg Why Choose CONSTMACH Vibrating Feeder Bunkers? CONSTMACH is a trusted brand in the industry with years of engineering experience and high production standards. Our products stand out with their durable body structure, low maintenance requirements, and energy-efficient motor systems. Each one undergoes high-quality control processes to ensure long-lasting use. CONSTMACH Vibrating Feeders increase the performance of your crushing plant while minimizing your operating costs. If you are looking for quality, durability, and maximum efficiency, CONSTMACH is the right solution. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: new, functionality: fully functional, Year of construction: 2026, CONSTMACH vibrating screens are engineered for aggregate, mining, and recycling applications, featuring a durable body for long service life. Their simple yet efficient design ensures precise screening of various materials. The modular structure allows easy maintenance and quick part replacement, while the user-friendly design boosts productivity. Screens can be produced as “top-driven” or “center-driven,” with steel or polyurethane surfaces depending on material hardness. High-frequency vibration provides effective material distribution and optimal separation. With powerful motors, balanced vibration, and damping systems, CONSTMACH screens ensure reliable, continuous operation. Chodpfx Ajxpyinofgsc Vibrating Screen Technical Specifications Model: CVS-2060 Number of Layers: 2 / 3 / 4 Layer Dimensions: 2,000 x 6,000 mm Production Capacity: 192 – 240 t/h Motor Power: 15 / 18.5 / 22 kW Weight: 17,500 – 20,500 kg Why Choose CONSTMACH Vibrating Screens? CONSTMACH offers maximum efficiency, low maintenance costs, and long service life with its screen systems manufactured to international quality standards. It provides solutions suitable for every capacity with its wide range of models. With superior engineering, a reliable drive system, and the use of highly durable materials, CONSTMACH offers its customers not just equipment, but a sustainable investment. If you are looking for high performance, low energy consumption, and easy maintenance in your production line, CONSTMACH Vibrating Screens are the most suitable solution for your needs. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products tailored to their needs. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-term use advantages.

Condition: repair required (used), RMS MZV 303W20 Vibration Exciter with Team Sliding Table 483.24/2 – Parts Carrier Description For sale is a used vibration testing system from RMS Regelungs- und Messtechnik / Dynamik Test Systems with a Team sliding table. The system consists of, among other things, an RMS vibration exciter, type MZV 303W20, and a Team sliding table, model 483.24/2. The complete unit is offered exclusively as a parts carrier. The functionality of the system has not been tested. Operational readiness or completeness is not guaranteed. Due to the existing components, the unit is particularly suitable for obtaining spare parts, for repairing existing vibration testing systems, and for repair and modification projects. Technical Data Chedez E Iqvepfx Afgjc Vibration Exciter Manufacturer: RMS Regelungs- und Messtechnik Dynamik Test Systems Type: MZV 303W20 Device Type: Vibration Exciter Year of Manufacture: 1995 Sliding Table Manufacturer: Team Model: 483.24/2 Year of Manufacture: 1998 Weight according to nameplate: 600 kg Equipment RMS Vibration Exciter MZV 303W20 Team Sliding Table 483.24/2 Clamping plate with threaded holes Pneumatic vibration isolation Weight compensation Manometer and controls Pneumatic control Pump/motor assembly Hose lines and connections Other components and accessories as shown in the pictures Dimensions Overall system: approx. 2,500 × 1,300 × 1,500 mm (L × W × H) Note: The overall dimensions have been estimated based on the available pictures and are not manufacturer's specifications. Weight Sliding table according to nameplate: 600 kg Total weight of the system: cannot be determined definitively. There is also a handwritten marking on the system stating "approx. 4000 kg". Since this information cannot be assigned to a definitive nameplate, it will not be used as the technical total weight. Transport Data Transport dimensions: approx. 2,500 × 1,300 × 1,500 mm Transport weight: to be determined before loading Due to its size and weight, loading or collection requires suitable heavy-duty transport equipment. Scope of Delivery 1 × RMS MZV 303W20 Vibration Exciter 1 × Team Sliding Table 483.24/2 Existing mounting, control and supply components Hose lines and accessories as shown in the pictures Condition Used. Signs of wear and tear due to age and use are present. The visual condition can be seen in the pictures. Sold exclusively as a parts carrier. Functionality not tested. The system is not offered as a functional machine. No guarantee for operational readiness or completeness. Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.

Condition: good (used), Year of construction: 2019, Electric motor, three-phase motor, vibration motor, industrial vibration motor, roller vibrator, unbalanced motor, vibration motor, shaking motor, vibrator -Manufacturer: OLI MVE, Electric Vibration Motor -Type: MVE 500/15N-4OAO -Power: 0.25 kW -Speed: 1400 rpm -Protection rating: IP66 -Dimensions: 330/175/H195 mm -Weight: 20.9 kg Chodpfjzgbg Nsx Afgoc

Condition: used, Year of construction: 2019, Electric motor, three-phase motor, vibration motor, industrial vibration motor, roller vibrator, unbalanced motor, vibration motor, shaking motor, vibrator Chodpfx Aszgbk Ujfgec -Handover: in its current condition as inspected -Case cover: damaged, see photos -Manufacturer: OLI MVE, Electric Vibration Motor -Type: MVE 500/15N-4OAO -Power: 0.25 kW -Speed: 1400 rpm -Protection rating: IP66 -Dimensions: 330/175/H195 mm -Weight: 20.9 kg

Year of construction: 2026, condition: new, Heavy Duty Vibrating Washing Screens are designed for classification and washing of all types of materials such as medium-sized aggregates and finished products. Model: FABO TE-1650 Type: Vibrating Screen Cjdpfx Afjyy Ilhjgehc Dimensions: 1600 x 5000 mm Decks: 2-3-4 Motor: 15-18.5 kW Bearings: Heavy-duty SKF-FAG Capacity: 100-130 Tons per hour Chassis, motor, and safety covers included. All our products come with a 1-year warranty! Free installation and operator training included. FOR MORE INFORMATION, PLEASE CALL US!

Condition: used, Year of construction: 1999, Electric motor, year approx. 1999 Csdsxu Ewnjpfx Afgehc

Year of construction: 2010, operating hours: 1,480 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1873076, We are offering this very well-maintained Uhde high-pressure pump for waterjet, HPS 4022, year of manufacture 2010. Manufacturer: Uhde High-Pressure Pump for Waterjet Model: HPS 4022 Year of Manufacture: 2010 Condition: Very good Category ID: 34 Machine Type: Uhde HPS Waterjet High-Pressure Pump If you have any questions or require further information, please feel free to send us a message or give us a call. Chjdpfx Ajygmhtsfgoc

Condition: used, Electric motors Chjdpfx Aoxfvzrofgjc

Condition: new, Eurotec Innovation TV45 – Trough Vibrator / Vibratory Finishing Machine (Made in Germany) The TV45 trough vibrator by Eurotec Innovation is a powerful and versatile vibratory finishing machine for professional surface finishing applications. The machine stands out due to its robust construction, high efficiency, and universal range of applications. Machine type: Trough Vibrator TV45 Shown: TV45 incl. sound enclosure and WS25 for part separation Manufacturer: Eurotec Innovation GmbH Thanks to the U-shaped working bowl, even larger and longer workpieces can be processed efficiently – while maintaining a compact design. The vibration motor mounted directly beneath the working bowl ensures highly efficient energy transfer and consistent finishing results. 🔧 Technical Data: Gross volume: approx. 115 liters Internal dimensions of working bowl: Length: 850 mm Width: 380 mm Height: 395 mm Rated speed: 1500 rpm Power supply: 400V – 16A – 50 Hz Advantages: ✔ Compact and robust design ✔ High energy efficiency due to direct vibration drive ✔ Universally suitable for various workpieces Cedpfx Afof Sqdtjgshc ✔ Deflection edge to reduce part adhesion ✔ Low-maintenance vibration motor ✔ Optionally available with sound enclosure and separation systems 🏭 Applications: Deburring, smoothing, and polishing Descaling, derusting, and cleaning Edge rounding Surface finishing The TV45 is an economical and high-performance solution for companies looking for a flexible vibratory finishing system for a wide range of applications – from individual parts to small batch production. The machine shown in the images includes optional accessories. The listed price refers to the base machine (TV45). A suitable electrical control unit is required for operation. Additional variants and custom configurations are available upon request. From development to production, we provide all products from a single source – all “Made in Germany”. ----- Please feel free to contact us – we will be happy to advise you without obligation. ----- The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This offer is for presentation purposes only. Contract negotiations are conducted via telecommunications (email, fax, phone, messaging platforms). We will first provide you with a non-binding offer, including our general terms and conditions as well as information on the right of withdrawal and legal notice, before any purchase or contract is concluded.

Condition: used, Year of construction: 2009, operating hours: 3,303 h, functionality: fully functional, pressure: 4,000 bar, overall weight: 990 kg, Uhde HPS 4011 High pressure pump 15 HP /HP (Pictures are condition) Chjdpfxjuixdcs Afgoc

Condition: used, Allgaire Large Vibrating Sieve 4 filter screens Screen diameter 1200mm High Efficiency: Achieves separation efficiencies up to 99% Chsdpfxjzz N Rxo Afgsc Gentle Treatment: Low-acceleration kinetic movement prevents particle destruction Ideal for fragile products Screen Cleaning: Equipped with integrated bouncing balls Heavy-duty German engineering with dust-tight cover options and quick-clamping elements.

Condition: like new (used), functionality: fully functional, power: 45 kW (61.18 HP), nominal power: 45 kW (61.18 HP), rotational speed (min.): 2,960 rpm, type of input current: AC, ATB Nordenham ATEX Rated 45kW Motor Type: CD 225M-2 New, unused, ex stores stock Cjdpfx Afjyq Sf Ssgehc

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, overall weight: 34 kg, input frequency: 50 Hz, input current: 2 A, input voltage: 230 V, RETSCH AS 200 control – Vibrating sieve machine with analytical sieves 25–200 µm For sale is a RETSCH AS 200 control for particle size analysis and fractionation of powders and bulk solids. The system is suitable for applications in laboratories, research, and quality assurance, for example, for the analysis of metal and ceramic powders. The machine is in very good condition with normal signs of wear and tear. The total new price, including the listed accessories, was €6,180 in January 2024. The electromagnetic drive generates a three-dimensional sieving motion. The vibration amplitude, sieving duration, and interval operation can be digitally adjusted. The controlled amplitude enables reproducible sieving results; up to 99 parameter combinations can be saved. Technical specifications according to the manufacturer: - Measurement range: 20 µm to 25 mm, depending on the material and sieve set - Maximum sample quantity: 3 kg - Vibration amplitude: 0.20–3.00 mm, digitally adjustable and controlled - Sieving duration: 1–99 minutes - Suitable for dry and wet sieving, with corresponding accessories - Dimensions of base unit (W × H × D): 417 × 212 × 384 mm - Weight of base unit: approx. 35 kg Available accessories: Ten used analytical sieves according to DIN ISO, each with a diameter of 200 mm and a frame height of 25 mm. One sieve each with the following mesh sizes: Chedpoz Ixfvjfx Afgoc 25 / 32 / 38 / 45 / 53 / 63 / 75 / 100 / 150 / 200 µm A collection tray with a diameter of 200 mm and a height of 50 mm is also included. Shipping is possible; shipping costs will be charged separately. If you are interested, please contact me.

Condition: ready for operation (used), Year of construction: 2001, For sale is a complete set of equipment from two specialized production lines dating back to 2001 (machine park liquidation), designed for the production and final processing of electric motor stators. The machines are from reputable Italian manufacturers. Chjdpfxozuuims Afgsc The set includes two dedicated lines: 1. Line 63 (for stators with an outer diameter of ⌀90 mm / inner diameter of ⌀50 and ⌀47 mm): * Hydraulic press for the pre-forming of stator cores. * Core winding machine (stator core tying machine). * Final hydraulic press for forming the cores to their final dimensions (PiErre Galaxy A-100 with an Onda Impianti power unit). 2. Line 71 (for stators with an outer diameter of ⌀110 mm / inner diameter of ⌀55 mm): * Press for pre-forming. * Core winding machine (Mussino L.D.A.). * Final hydraulic press (PiErre Galaxy A-100). * Machine for joining the winding lead with the connection lead (Inarca Splice-Mat 1000). The lines also include: * Main machine, DMG MECCANICA s.r.l., model IM3E (year of manufacture 2005). * Set of winding wire unwinding and feeding units, Min Jen Precision Machinery, model MPI-0850FD, complete with additional tensioning equipment and plates. The machines have complete safety guards, and the hydraulic power supply is provided by high-performance Oleodinamica power units from Onda Impianti. It is possible to adapt the tooling to other types of motors. The equipment is ready for loading. Please contact us.

Condition: ready for operation (used), Year of construction: 1998, Immediately available, free of encumbrances: Cjdpfxez Ixn Do Afgjhc Motorized pivoting bending machine GEKA Type NSJ 1500/2.5 Year of manufacture 1998 Working length 1500 mm Material thickness 2.5 mm Drive power 3 kW Weight 2.5 tons Complete set of accessories Price: EUR 3,750.00 plus VAT, ex works