Used Tschudin Htg 600 for sale (11,362)

Condition: good (used), Machine is in good condition with equipment. Gjdpfxowu Ey Ej Af Seiw

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, center height: 150 mm, total length: 620 mm, Mechanics: All wear parts of the machine are replaced, including the infeed spindle in the X-axis. All assemblies are restored to as-new condition. After the overhaul, the machine is comparable to a new machine. Geometry: The machine is completely dismantled down to the guides. Before the geometry of the individual tables and assemblies can be restored, both guides of the X and Z axes are scraped by hand and restored to as-new condition. After completion, the machine receives a measurement report in accordance with the manufacturer's specifications. Painting: Once the geometry of the machine has been restored, it is prepared for repainting. All housings, tables and the machine bed are stripped of old paint, cleaned and repainted. Hydraulics: The entire lubrication system, including the lubrication unit, is replaced. The hydraulic unit is also completely overhauled. Conventional internal cylindrical grinding machine TSCHUDIN HTG 610I Equipment of the machine: Godpfeurw Uyex Af Soiw Technical data: Center height: 150 mm Center width: 680 mm Grinding length: 620 mm Weight and space requirement of the machine: 2500kg // 2340x1445x1900 mm Machine equipment (standard): 1 pc. Workpiece headstock MK5 1 pc. Control panel 1 pc. Holder for internal grinding spindle 1 pc. Speed control unit for belt spindle (UJ50 / UJ80) FISCHER 1 pc. Hydraulic unit Optional: - Digital measuring system 2-axis - Freely adjustable speed (1-800 rpm) incl. soft start (higher speeds are optionally possible after clarification of technical details) - Separate low speed for part alignment

Condition: used, Cylindrical Grinding Machine TSCHUDIN type HTG 400 Between points: 400 mm Centre height: 100 mm Cone: CM4 Spindle speed: from 70 to 500 RPM Max table travel: 420 mm Table orientation at 15° Grinding wheel: Ø 300 mm Retractable tailstock CM3 Machine rebuilt by REWITECH SA (Switzerland) in 1995 Equipped with one settling tank PHILIPS Voltage: 380 V Dimensions (L x W x H): 2000 x 1400 x 1600 mm Weight: approx 1,5 T Gjdpszk Dbdsfx Af Sjiw

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, machine/vehicle number: 1, center height: 150 mm, center width: 480 mm, grinding diameter: 299 mm, New arrival 1 Hydraulic Universal External and Internal Cylindrical Grinding Machine TSCHUDIN HTG 410 U – Year 1988, partial overhaul in 2026 – 150 mm center height x 480 mm center distance – workpiece spindle head MK 5 with stepless speed adjustment. Grinding wheel left and right – swiveling internal grinding attachment with 18,000 RPM Machine equipped with four-axis digital readout – X-axis – Y-axis and rotary encoder with one-micron resolution when swiveling the universal grinding spindle head and workpiece spindle head! Pneumatic air cushion lifting for effortless swiveling of workpiece spindle head and grinding spindle head. Machine includes four-jaw chuck, halogen lamp, paper band filter, folding dresser, and balancing arbor. Guideways in X-axis newly scraped – machine thoroughly inspected by specialist. Automatic cycle with "rapid traverse to automatic infeed – dwell time – retraction – infeed dimension remains set". Very little used machine from prototype manufacturing! Price on request (Domestic sales plus 19% VAT.) Technical data not binding – subject to prior sale and errors. Best regards, INDUBA GmbH Gijdpfx Ajvdumbsf Sew Mathias Becker D-78628 Rottweil

Condition: good (used), Year of construction: 1990, CNC cylindrical grinding machine Manufacturer: TSCHUDIN, Type: HTG 22 - 862, Year of manufacture: 1990 with MARPOSS E14 control and measuring control E5. Distance between centers: 650 mm Center height: 100 mm Grinding length: 620 mm Weight: approx. 4,500 kg. Further data can be found in: TECHNICAL DATA SHEET Gjdpfx Aoid Aphsf Seiw Includes many grinding wheels and attachments. Complete machine documentation available. Machine is in stock.

Condition: used, total height: 1,550 mm, total length: 1,600 mm, total width: 1,200 mm, Empty weight: 2.100 kg - Documentation available: No - CE marking present: Yes - CE certificate present: No - Drive system: Conventional - Power [kW]: 4.5 - Distance between centres [mm]: 480 - Centre height [mm]: 100 - Transport dimensions: 1600mm x 1200mm x 1550mm (l x w x h) - Transport weight [kg]: 2100kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Gisdpfxswnh Tzo Af Sjw Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, TSCHUDIN GL 600 is a CNC centerless grinding machine designed for precision, high accuracy and reliable operation. Working capacities: grinding diameter 2–100 mm; grinding wheel Ø600 mm × 350 mm; regulating wheel Ø350 mm × 350 mm, swivelling range ±5°. Key specs: grinding spindle stepless, speeds up to 45 m/s; regulating spindle stepless 0–290 t/min; voltage 50 Hz 3x400 V; grinding motor 22 kW; total power 26 kVA; overall dimensions L2300 × W2000 × H2150 mm. Enables tight tolerances; suitable for automotive, watchmaking, machine tools, aerospace and medical sectors Gjdpfoyxn Hpox Af Sjiw

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, Data Machine type: HTG 610 U Workhead: MK5 Tailstock: MK3 Center height: 150 mm Center width: 680 mm Grinding length: 620 mm Grinding wheel left: 350 x 50 x 127 mm Grinding wheel right: 250 x 25 x 127 mm Condition The machine is currently in a used (not reconditioned) condition. All wear parts of the machine will be replaced, including the feed spindle in the X and Z axis. All components will be returned to as-new condition. After the overhaul, the machine is comparable to a new machine. Gsdpfx Ajcgtp Ejf Soiw Geometry The machine will be completely dismantled down to the guides. Before the geometry of the individual tables and components can be restored, both guides of the Z and X axis are manually scraped and restored to as-new condition. Upon completion, the machine is issued with a test certificate according to the manufacturer’s specification.

Condition: reconditioned (used), Year of construction: 1992, functionality: fully functional, center height: 150 mm, grinding length: 620 mm, center width: 680 mm, grinding wheel diameter: 350 mm, total width: 500 mm, Condition of the machine: The machine is currently in a used, non-overhauled condition. The following work carried out on the machine: - Complete disassembly of the entire machine except for the guides - Replacement of all sealing and wear parts of the entire machine - Replacement of the infeed spindle of the X-axis Godpfx Aferz Nflo Ssiw - Replacement of the main bearing of the workpiece spindle - Replacement of grinding spindle - All machine assemblies are restored to as-new condition Geometry: - Scraping of the X-axis guide - Scraping the Z-axis guide - Grinding the X-axis table - Grinding the Z-axis table - Grinding the upper tables - Grinding of the assembly housing (workpiece headstock, grinding headstock and tailstock) - Creation of measurement report for TSCHUDIN cylindrical grinding machine Painting: The main assemblies are repainted, the rest of the machine retains the original paintwork Electronics: The complete electronics of the machine are checked, tested and defective switches and cables are replaced

Condition: new, Year of construction: 2026, functionality: fully functional, Data Machine type: HTG 310 Workhead: MK5 Tailstock: MK3 Center height: 100 mm Center width: 380 mm Grinding length: 380 mm Grinding wheel: 350 x 50 x 127 mm Gedpfx Afocgkure Seiw Condition The machine is currently in a used (not reconditioned) condition. All wear parts of the machine will be replaced, including the feed spindle in the X and Z axis. All components will be returned to as-new condition. After the overhaul, the machine is comparable to a new machine. Geometry The machine will be completely dismantled down to the guides. Before the geometry of the individual tables and components can be restored, both guides of the Z and X axis are manually scraped and restored to as-new condition. Upon completion, the machine is issued with a test certificate according to the manufacturer’s specification.

Condition: refurbished (used), Year of construction: 2026, center height: 100 mm, center width: 680 mm, total length: 620 mm, grinding diameter: 199 mm, Condition of the machine: Giedpev Hqlrjfx Af Sew The machine is currently in a used, unrevised condition. All wearing parts of the machine are replaced, including the feed spindle in the X-axis, and all assemblies are restored to a new condition. After the revision, the machine is easily comparable to a new machine. Geometry: The machine is completely dismantled except for the guides. Before the geometry of the individual tables and assemblies can be restored, the two guides of the Z and X axes are scraped by hand and restored to a new condition. After the work is completed, the machine receives a measurement report according to the manufacturer's original specifications. Electronics: The electronics and the control cabinet housing are completely replaced. All electrical parts are replaced, including the motors. Hydraulics: The entire lubrication system, including the lubrication unit, is replaced. The hydraulic unit is overhauled and the hydraulic lines are replaced with new lines. Painting: As soon as the geometry of the machine has been restored, it is prepared for repainting. All housings, tables and the machine bed are freed of the old paint, cleaned and repainted. Technical data of the machine: Center height: 100 mm Center width: 680 mm Grinding length: 620 mm Grinding wheel: 350 x 50 x 127 Weight and space requirement of the machine: 2600kg // 2320x1400x1450 mm Machine equipment (standard): • 1 piece grinding headstock Ø35 • 1 piece workpiece headstock MK5 • 1 piece protective cover for discs Ø 400 mm • 1 piece tailstock MK 3 standard • 1 piece flange Ø 127 mm • 1 piece hydraulic unit • 1 set of operating tools and operating instructions

Condition: good (used), Center height: 100 mm Distance between centers: 380 mm Grinding length: 380 mm Workpiece headstock: MK5 Tailstock: MK3 Grinding wheel size: max. 350 x 50 x 127 Space requirement of the machine: about 2'020 x 1'200 x 1'450 mm Gjdsfg U A Njpfx Af Seiw Equipment: -with band filter

Condition: excellent (used), The scope of delivery includes: 02x workbench stands, used Material color: Sendzimir galvanized Frame profile: 90 x 75 x 2.00 mm Stand height: 900 mm Stand depth: 600 mm Incl. cross and diagonal braces, base plates The stands are pre-assembled (bolted framework) 04x workbench crossbeams, used Material color: RAL 7035 light gray Box profile: 80 x 40 mm Crossbeam type: TRV1-240-084-30CE Clear span: 2,400 mm 08x locking pins, new Design: fully galvanized 01x chipboard, 2nd choice, used Chipboard thickness: 38 mm Chipboard width: 2,580 mm Chipboard depth: 600 mm Surface: possibly coated (possibly in two parts) 01x chipboard, 2nd choice, used Chipboard thickness: 38 mm Chipboard width: 2,380 mm Gisdpfoi Ewqkjx Af Sjw Chipboard depth: 600 mm Surface: possibly coated (possibly in two parts) 16x drilling screws, new Design: galvanized Dimensions: 6.3 x 70 mm The images are for illustrative purposes of the material. The material color may vary. The chipboards can be either coated or uncoated. - The workbenches are supplied unassembled; - The workbench stands are pre-assembled; - The production time is generally approximately 5 working days.

Condition: new, Year of construction: 2026, functionality: fully functional, operating pressure: 6 bar, inner dimension width: 600 mm, inner dimension height: 400 mm, volume flow: 10,500 m³/h, Equipment: documentation/manual, New Wire Mesh Belt Shot Blasting Machine RB-600 AH 4 Description: The RB-600 AH 4 wire mesh belt shot blasting machine from ABRAZIV Kft. is designed for the economical and continuous surface treatment of small to medium-sized workpieces. The machine is suitable for descaling, derusting, cleaning, and surface preparation of aluminum and steel castings, forgings, and workpieces that cannot be shot blasted in bulk. The machine is manufactured to order and can be configured individually according to customer requirements. The RB-600 AH 4 is equipped with four ABR-380 shot blasting turbines. Two turbines are located above and two below the wire mesh conveyor belt. This arrangement ensures optimal coverage of the cross-section and a uniform blasting result. The turbines operate at an angle of approximately 70° to the direction of travel and have eight blasting blades and a pre-accelerator. The active blasting area is lined with highly wear-resistant manganese steel. Other internal areas are protected by wear-resistant, noise-reducing rubber. The wire mesh belt is made of highly wear-resistant spring steel. Gsdpozkivtsfx Af Ssiw A closed blasting media circuit with a screw conveyor, bucket elevator, blasting media cleaning system, and dosing system ensures reliable operation. Three-layer rubber curtains reduce blasting media leakage. An adjustable high-pressure blow-off system cleans the workpieces after the blasting process. The extraction and filter system with cartridge filters achieves a dust emission of max. 3 mg/m³. Technical Data Passage Passage width: 600 mm Max. workpiece height: 400 mm Min. workpiece length: approx. 1,000 mm Shot Blasting Turbines Number: 4 Type: ABR-380 Turbine diameter: 380 mm Speed: 2,800 1/min Blasting media output per turbine: 120 kg/min Wire Mesh Conveyor Belt Load capacity: 500 kg/m Speed: 0–4 m/min Power Consumption Base machine: 45.5 kW Cartridge filter: 7.5 kW Compressed air: min. 6 bar Compressed air consumption filter: 12.5 m³/h Other Data Blasting media capacity: approx. 1,000 kg Blasting media grain size: 0.4–1.2 mm Extraction capacity: 10,500 m³/h Filter area: 252 m² Dust emission: max. 3 mg/m³ Electrical Data Mains voltage: 3 × 400 V Control voltage: 220 V Frequency: 50 Hz Optional accessories available Magnetic drum separator Frequency converter Automatic blasting media dosing Special paint finish Transport Assembly Commissioning Operator training Spare parts supply Maintenance and service Applications Aluminum and steel castings Forgings Small steel components Single and series components Descaling Derusting Cleaning Surface preparation Location / Production Lichtenfels (Germany) / Kecskemét (Hungary) As a manufacturer, we produce shot blasting machines individually according to customer requirements. Other sizes and special designs are available. We will be happy to provide you with a non-binding offer. Price on request

Condition: excellent (used), The scope of delivery includes: 02x workbench stands, used Material color: Sendzimir galvanized Frame profile: 90 x 75 x 2.00 mm Stand height: 900 mm Stand depth: 800 mm Gsdpfx Asi Ew Dzof Sjiw Includes cross and diagonal braces, base plates The stands are pre-assembled (bolted frame) 04x workbench cross members, used Material color: RAL 7035 light gray Box profile: 80 x 40 mm Cross member type: TRV1-240-084-30CE Clear span: 2,400 mm 08x locking pins, new Design: fully galvanized The images serve to illustrate the material. The material color may vary. - The workbench frames are supplied disassembled; - The workbench stands are pre-assembled; - The production time is usually approximately 5 working days.

Condition: excellent (used), The scope of delivery includes: 02x workbench stands, used Material color: Sendzimir galvanized Frame profile: 90 x 75 x 2.00 mm Stand height: 900 mm Stand depth: 800 mm Incl. cross and diagonal braces, base plates The stands are pre-assembled (bolted framework) 04x workbench traverses, used Material color: RAL 7035 light gray Box profile: 80 x 40 mm Traverse type: TRV1-240-084-30CE Clear span: 2,400 mm 08x locking pins, new Design: fully galvanized 01x chipboard, 2nd choice, used Chipboard thickness: 38 mm Chipboard width: 2,580 mm Chipboard depth: 800 mm Surface: possibly coated (possibly in two parts) 01x chipboard, 2nd choice, used Chipboard thickness: 38 mm Chipboard width: 2,380 mm Chipboard depth: 800 mm Surface: possibly coated (possibly in two parts) 16x self-drilling screws, new Design: galvanized Dimensions: 6.3 x 70 mm Gisdsi Ewqrjpfx Af Ssw The images are for illustrative purposes only. The material color may vary. The chipboards may be coated or uncoated. - The workbenches are supplied disassembled; - The workbench stands are pre-assembled; - The production time is typically approximately 5 working days.

Condition: excellent (used), The scope of delivery includes: 02x workbench frames, used Material color: Sendzimir galvanized Frame profile: 90 x 75 x 2.00 mm Frame height: 900 mm Frame depth: 1,000 mm Includes cross and diagonal braces, base plates The frames are pre-assembled (bolted framework) 04x workbench crossbars, used Material color: RAL 7035 light gray Box profile: 80 x 40 mm Crossbar type: TRV1-240-084-30CE Clear span: 2,400 mm 08x locking pins, new Design: fully galvanized 01x chipboard, grade II, used Gisdoi Ewqyspfx Af Ssw Chipboard thickness: 38 mm Chipboard width: 2,580 mm Chipboard depth: 1,000 mm Surface: possibly coated (possibly in two parts) 01x chipboard, grade II, used Chipboard thickness: 38 mm Chipboard width: 2,380 mm Chipboard depth: 1,000 mm Surface: possibly coated (possibly in two parts) 16x drilling screws, new Design: galvanized Dimensions: 6.3 x 70 mm The images are intended to illustrate the material. The material color may vary. The chipboards may be coated or uncoated. - The workbenches are supplied disassembled; - The workbench frames are pre-assembled; - The production time is usually approximately 5 working days.

Condition: excellent (used), The scope of supply includes: 02x workbench stands, used Material color: Sendzimir galvanized Frame profile: 90 x 75 x 2.00 mm Stand height: 900 mm Stand depth: 1,000 mm Incl. cross and diagonal braces, base plates The stands are pre-assembled (bolted framework) 04x workbench crossbars, used Material color: RAL 7035 light gray Box profile: 80 x 40 mm Crossbar type: TRV1-240-084-30CE Clear span: 2,400 mm 08x locking pins, new Design: fully galvanized The images serve to illustrate the material. The material color may vary. Gijdpsi Ew D Eefx Af Sjw - The workbench frames are supplied disassembled; - The workbench stands are pre-assembled; - The production time is typically approx. 5 working days.

Condition: used, O F F E R We can offer you ex stock, subject to prior sale and errors: TSCHUDIN (CH) Gjdpfx Aowftt Uof Soiw Centerless cylindrical grinding machine Model TC-300 Year of manufacture 2001 Grinding range – Ø 0.5 – 25 mm (30) Max. workpiece length for plunge grinding 125 mm (140) Max. workpiece length for through-feed grinding 300 mm Grinding wheel dimensions: Ø x width Ø 300 x 125 mm (140) Regulating wheel dimensions: Ø x width Ø 225 x 125 mm (140) Grinding wheel peripheral speed 35 m/sec Grinding wheel infeed 3 mm Regulating wheel speeds, steplessly adjustable 0 – 444 rpm Regulating wheel inclination Degrees Grinding wheel drive approx. 7.5 kW Total connected load approx. 13 kW – 380 V – 50 Hz Weight 2,500 kg Accessories / Special equipment: • The machine operates with a fixed workpiece position, allowing both the grinding spindle and the regulating spindle units to be adjustable. This simplifies machine setup as well as automatic workpiece loading and unloading. • SIEMENS PLC control for automatic operation with SIEMENS touchscreen. Complete electrics and PLC control renewed in 2016! • Electromechanical profile dressing device for the regulating wheel • Regulating and grinding wheel speeds are steplessly adjustable. • Adjustable plunge guide bridge with mounted plunge workpiece rest • Electromechanically controlled workpiece pusher & automatic pneumatic workpiece ejector • Additional outfeed cylinder for automatic tilting of workpieces after plunge grinding (adjustable 4–30 mm) • Machine is prepared for use with a HELP-TEC bar loader MSHL08/400P, which is currently not present. • Complete enclosure of working area with monitoring technology • Separate control cabinet, operating and electrical manuals for the retrofit Condition: Very good! Fitted with new electronics in 2016! Click here for a video of the machine: Delivery: ex stock, immediately available, FCA Metzingen Payment: strictly net – after receipt of invoice Always a large selection of grinding machines in stock – please inquire for your requirements!

Condition: excellent (used), For sale: a Karl Tränklein Case Bender, a machine designed for shaping and bending the spines of hardback book covers. The device gives the covers the appropriate curvature, ensuring a perfect fit to the book block. The machine is equipped with adjustable rollers, allowing for adaptation to different cover thicknesses. The robust cast iron construction ensures high precision and long-lasting durability. Gijdpfx Aoziwnbsf Ssw Technical data: Manufacturer: Karl Tränklein Type: Case Bender / spine forming machine Working width: approx. 600 mm Adjustable roller pressure Stable cast iron construction Electric drive Work table Condition: used Applications: Production of hardback books, Bookbinding, Printing companies, Graphic arts companies, Production of albums, catalogs, and covers.

Condition: good (used), total length: 1,000 mm, total width: 600 mm, total height: 2,500 mm, load capacity per storage section: 150 kg, TECHNICAL DATA • Manufacturer: META • Frame height: 2,500 mm • Shelf width: 1,000 mm • Frame depth: 600 mm • Shelf load capacity: 150 kg • Number of shelves per bay: 6 • Surface: galvanized • Plug-in assembly • Condition: used Large quantities available immediately. Graduated prices net per piece plus VAT: Basic bay: 1 - 5 bays: €54.00 6 - 20 bays: €52.38 Giodpfeuk E Thex Af Sew 21 - 50 bays: €50.76 From 51 bays: €49.14 Add-on bays: 1 - 10 bays: €39.00 11 - 25 bays: €37.83 26 - 75 bays: €36.73 From 76 bays: €35.69 Ex works Nordhorn. YOUR CONTACTS: • Tanja Henkelmann • Rainer Nürenberg • Oliver Kopp TRANSPORT & ASSEMBLY We will be happy to assist you with the transport and assembly of the goods. This item is available for collection. Delivery or shipment is possible for an additional charge. The additional costs depend on the delivery location and the scope of the shipment and can be requested individually from us. PAYMENT TERMS Payment terms will be agreed upon in the event of an order. The price is understood to be the unit price/net price or as specified in the product description (plus VAT). You will, of course, receive an invoice with VAT shown. ABOUT US DLK in Nordhorn deals in new and used products in the areas of warehouse logistics, conveyor technology, storage platforms, textile storage, and machines for retail, industry, and trades. We offer you attractive used offers from various manufacturers/brands on an ongoing basis. If you have any questions, please do not hesitate to contact us. Four wins – The success factors of DLK – Storage technology | Levelmaker® | Logistics | Solutions

Condition: good (used), Heidelberg Eurobind 600 Perfect Binder Giedpezgc Tksfx Af Sow Machine in perfect condition, with no signs of use. Ready to operate. Very low mileage. Manufacturer’s description: Professional binder for perfect paperback binding. This fully automatic binder features an exceptionally sturdy design and is equipped with a hot glue gun, making it effective even for small and very small quantities of book covers or pages. The Heidelberg Eurobind 600 is a single-jaw binder with automatic cover feeding, which, operated by a single person, delivers impeccably bound books of consistently high quality. It binds books with a thickness of 2 to 50 mm and a spine length of 120 to 320 mm, with a maximum production rate of up to 500 books per hour. Factory-installed cutter with additional scoring knives and cleaning brushes. Automatic cover feeding and creasing. The set includes documentation, waste extraction, fume extraction from the glue gun, and an Abac compressor.

Year of construction: 2018, condition: like new (used), PlateExakt 600 - Cliché mounting device/die-cutting cylinder Gisdpfxsl Ax Uws Af Sjw  Age: 1992  Mounting device  cliché mounting device which is exclusively designed to, the cliché or the die-cutting plate onto the impression or die-cutting cylinder safely, precisely and quickly cylinder. The device has two high-resolution USB cameras that can be moved linearly on a precision guide. precision guide. Synchronised via the centre and individually adjustable by means of a handwheel for different printing widths.  Max. diam.: 227”  Min. diam.: 60”  Width: 620mm

Year of construction: 2023, condition: excellent (used), Professional pneumatic device for emptying SEMCO 600 ml cartridges and containers, designed for industrial applications (adhesives, sealants, pastes, high-viscosity materials). Manufacturer data: • Manufacturer: axiss GmbH (Germany) • Type: 9110 / B-SEMCO600-PN-KM-F • Year of production: 2023 • Serial number: 514 • Quality standard: DIN EN ISO 9001:2015 Gedpfxjyc Nzue Af Ssiw • CE marking Technical description: • Pneumatic emptying of SEMCO 600 ml cartridges • Robust construction on an aluminium profile mounting plate • Piston assembly with transparent sleeve (position control) • Pressure regulator with pressure gauge • Directional control valve • Pneumatic quick couplings • Shut-off valve (safety) • Vertical or horizontal mounting possible • Smooth and controlled operation

Condition: excellent (used), Assortment of SK50 tool holders/tools (approx. 600 pieces). Item Condition: Gisdpfx Afsy U Ithe Sow Good used condition.