Used Troester Thermoforming Machine for sale (64,703)

Condition: new, Year of construction: 2017, functionality: fully functional, operating hours: 25 h, input voltage: 380 V, type of input current: three-phase, total height: 1,500 mm, total length: 5,200 mm, total width: 2,350 mm, overall weight: 2,500 kg, saw band length: 520 mm, saw band width: 580 mm, New machine. Djdpfjunia Hex Al Aowc

Year of construction: 1995, condition: used, COMI SL2000 x 900 x 550mm Thermoforming Machine. S/No. 646 (1995) TECHNICAL DATA OF THE EQUIPMENT Dwjdpsz I Sbdefx Al Aec Max. frame inner size mm 2005 x 905 Scrap cutter motor power kW 3 Max. tool base size mm 2000 x 900 Scrap conveyor motor power kW 0.37 Min. tool base size mm 700 x 500 Finished workpiece discharge belt motor power kW 0.75 Max. sheet size mm 2090 x 960 Cross-cutting motor power kW 0.25 Min. sheet size mm 790 x 560 Cross-cut scrap conveyor motor power kW 0.22 Max. tool height mm 800 (550+250) Transfer unit motor power kW 1.5 Maximum formed workpiece height mm 550 Auxiliary units max. consumption kW 5.10 Max. sheet stack height mm 1000 Max. installed power kW 375 Max. pallet height mm 180 Tempering unit power kW 52 Upper heating power kW 83.3 Power consumption at 70% load kW 262.5 Lower heating power kW 71.3 Vacuum pumps capacity m3/h 750 (250x3) Upper preheating power kW 52 Tool vacuum tank capacity L 2000 Lower preheating power kW 46.8 Bell vacuum tank capacity L 2000 Oil pump motor power kW 19 (15+4) Required oil quantity L 600 Vacuum pump motor power kW 23.4 (7.8x3) Required air pressure kPa 600 Sheet centering motors power kW 0.24 (0.12+0.12) Incoming water pressure kPa 200-300 Sheet feed motor power kW 2.2 Max. hydraulic operating pressure MPa 18 Sheet feed width-adjustment motor power kW 2.2 Hydraulic operating pressure MPa 10 Sheet picker motor power kW 0.37 Incoming water temperature °C 12-20 Location: These lots are located in Susegana, Treviso, Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: ready for operation (used), Year of construction: 1990, operating hours: 160,857 h, functionality: fully functional, machine/vehicle number: 396, type of input current: AC, input voltage: 400 V, compressed air connection: 8 bar, sheet thickness aluminum (max.): 80 mm, pressure: 16 bar, film width: 560 mm, roll diameter: 1,200 mm, overall weight: 3,000 kg, input current: 48 A, heating capacity: 19.4 kW (26.38 HP), Equipment: cooling unit, documentation/manual, ILLIG RV 53 Thermoforming Machine + a cooling unit – PS, PVC, PET & Other Thermoplastics Dwedsz Hi Ilspfx Al Aec The machine is suitable for the production of thermoformed products from PS, PVC, PET and other thermoplastic materials. The machine has been regularly maintained and well cared for throughout its operating life. It has only been used for approximately a few hours per day on average, resulting in relatively low operating hours for a production machine of this type. The machine is still in operation, allowing prospective buyers to inspect it under working conditions. A live demonstration is available by prior appointment. This is a good opportunity to acquire a well-maintained ILLIG RV 53 thermoforming machine with the advantage of being able to inspect and test the machine in actual production before purchase. Further technical specifications, photographs and additional information are available upon request.

Condition: excellent (used), Year of construction: 1981, machine/vehicle number: 1345, Machine Type: Two-Roll Mixing Mill (Mischwalzwerk) Main Manufacturer: TROESTER MASCHINENBAU (Sontra, Germany) Year of Construction: 1981 Origin: Made in Germany (West Germany) Heating System: Integrated heating system, equipped with temperature sensors. Dwjdpfxsyx Etgo Al Ajc Main Motor: EMOD (Herbert Odenwald Elektromotorenfabrik KG) Power: 45 kW (60 HP) Protection Class: IP 23 Current/Voltage: 88A / 380V (Delta) / 50Hz Speed (n1): 1465 U/min Gearbox (Transmission): Jahnel Getriebebau GmbH (Bochum) Type: D 450 SO Ratio: 16.4 : 1 Output Speed (n2): 89.3 U/min Oil Specifications: ISO-VG 320 Safety Features: Equipped with built-in temperature sensors for motor protection (Kaltleiter-Temperaturfühler 130°C).

Condition: ready for operation (used), Year of construction: 1967, functionality: fully functional, machine/vehicle number: 1597, type of input current: three-phase, input voltage: 380 V, heating capacity: 25.5 kW (34.67 HP), ILLIG UA 150 E Thermoforming Machine + US 100 – Complete Package Description Complete ILLIG thermoforming and processing package consisting of two industrial machines, both manufactured in 1967. The package consists of an ADOLF ILLIG UA 150 E vacuum thermoforming machine together with an ADOLF ILLIG US 100 auxiliary processing machine. Both machines originate from the same production period and were used as part of a thermoforming production setup. 1. ADOLF ILLIG UA 150 E – Vacuum Thermoforming Machine Manufacturer: ADOLF ILLIG Maschinenbau, Heilbronn, Germany Model: UA 150 E Machine No.: 1597 Year of manufacture: 1967 Working / forming area: 1,500 × 1,000 mm Supply voltage: 220 / 380 V Frequency: 50 Hz Motor power: approx. 2.2 kW Heating power: approx. 25.5 kW Industrial vacuum thermoforming machine designed for forming thermoplastic sheet material. The machine is equipped with: Large 1,500 × 1,000 mm forming area Heating system Vacuum system / vacuum pump Adjustable forming controls Pressure and vacuum gauges Separate electrical control equipment Manual operating controls Integrated working/forming table 2. ADOLF ILLIG US 100 – Auxiliary Processing Machine Manufacturer: ADOLF ILLIG Maschinenbau, Heilbronn, Germany Model: US 100 Machine No.: 536 Year of manufacture: 1967 Supply voltage: 220 / 380 V Frequency: 50 Hz Motor power: approx. 1.1 kW Band length: approx. 3,570–3,670 mm The US 100 is an auxiliary processing machine intended for secondary processing of formed components. It is equipped with a large movable working table, electrical drive, adjustable working elements, and separate electrical controls. Complete package Both machines are offered together as one complete package. The sale includes: ILLIG UA 150 E thermoforming machine ILLIG US 100 auxiliary processing machine Associated electrical/control equipment shown in the photos A quantity of unused old-stock plastic thermoforming sheet rolls is also available and can be supplied separately or included by agreement. The machines are currently installed/stored in Greece and are available for inspection by appointment. EXW Greece. Dismantling, loading, and transport are at the buyer's cost and responsibility. Dwsdozx Ergopfx Al Ajc

Year of construction: 1986, condition: used, Year of manufacture: 1986 Three stations (forming, cutting – with a movable upper table, stacking) for the production of packaging from PVC, PS, PET, and PLA films. Equipped with upper heating elements. Dodpfx Ajzu Nw Esl Aswc MAX. forming area: 500x350 mm Max. forming height/depth: 40/100 mm Max. film width: 550 mm Film thickness: 0.2-0.6 mm Installed power: 23 kW Vacuum pump capacity: 40 m³/h The machine underwent a major overhaul in 2021 and is fully functional. It can be seen in operation near Warsaw. Price: 35,000 EUR

Condition: excellent (used), This conveyor belt machine is ideal for shearing the edges of small carpet samples. Diagram of K-50 The key component of the KS 50 edge beveling machine is our SE 50 cutting unit. The machine is designed with angle adjustment from 0° to 60°. The depth of cut is adjustable from 2 mm to 22 mm. The guide plate for carpet samples can be easily adjusted steplessly from 20 mm to 210 mm. Quick and easy adjustments can be made by releasing the locking lever. The conveyor belt is driven by a three-phase motor. The speed of the cutting motor and the conveyor belt is infinitely adjustable by means of frequency converters. Larger pieces of carpets are guided manually as they pass through. The cutting width is 50 mm. Dedpfxeud Dqke Al Ajwc

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 202-052, film width: 570 mm, type of input current: three-phase, pressure: 6 bar, total width: 25,800 mm, total length: 82,200 mm, total height: 22,800 mm, Thermoforming machine used,functional for PET,PS,PP. Dwjdpfxerh E Ibj Al Ajc The machine is still in production mode, but is available immediately.

Year of construction: 1997, operating hours: 30,000 h, condition: used, functionality: fully functional, OVERHAUL in 2022 New reinforced table – 660x960mm No support leg /it is available for mounting, but the program needs to be updated/. Dwsdpfxozt Suko Al Ajc It has a new controller and can operate in sheet feeding mode. Price: 80,000 PLN Below are the specifications: Effective forming area 650 x 950mm Table stroke 300 mm Film width Up to 700 mm Installed power 15 kW Heating panel power 13 kW Pneumatic table lifting 0.4 MPa Compressed air consumption 5 m3/h Thickness of forming material 0.15-6mm Performance in cycles per hour 40 - 100 Weight approx. 250kg Dimensions: depth x width x height 1250mm x 2230mm x 2040mm

Year of construction: 1990, condition: ready for operation (used), Two identical thermoforming machines DIXIE-UNION DV 2000 are available. Supply voltage: 380V, frequency: 50Hz, rated current: 20A, version with red CEE three-phase plug (3~). Machine 1 was still in operation until 2025. Machine 2 has not been in use for a longer period and is not complete, as relays were removed for spare parts. An on-site inspection is possible, not under power. Dwsdpjylnz Ssfx Al Ajc

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Knee Travel: Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Dwodpfoxxb Rrsx Al Aec Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 1990, operating hours: 11,000 h, functionality: fully functional, machine/vehicle number: 1531, film width: 700 mm, type of input current: AC, total width: 700 mm, total length: 3,500 mm, total height: 3,500 mm, input voltage: 400 V, power of vacuum pump: 3,000 W, compressed air connection: 6 bar, working width: 700 mm, pump capacity: 100 l/min, mold height (min.): 300 mm, control cabinet width: 1,000 mm, operating temperature: 650 °C, Thermoforming machine UA 100 1 g year 1990 in good working order. Maximum sheet size: 1000x700x10 Upper heating 3 pilot emitters , lower heating 1 pilot emitter Motorized counter-mould height adjustment Quick clamping of upper and lower frame Dodpfst Iracsx Al Aowc Quick clamping of tooling on lower table Quick clamping of tooling on upper table Lower film sag control Bubbling with photoelectric cell Memorizable bubbling and demolding intensity → cascaded pneumatic valves BUSCH 100 m/cube vacuum pump Machine stopped and stored following its replacement by a new ILLIG UA 4 g automatic machine Price of machine dismantled and loaded on your truck Possibility of putting it back into service if you wish to come and see it

Year of construction: 2010, condition: excellent (used), functionality: fully functional, Manufacturer: CFS (GEA) Type: Compact 420 Year: 2010 Electrical connection: 28 kW, 42 A, 400 V, 50 Hz Labelling machine: Manufacturer: CFS Type: TiroLabe TL-150 Year: 2010 with gas flushing including 4 format sets Condition: very good Dodpfertq I Eox Al Ajwc The metal detector and Espera conveyor visible in the picture are not part of this offer. They are separate machines.

Year of construction: 1996, condition: used, Year of manufacture: 1996 Thermoforming, die-cutting for production from PET, PVC, PS, PLA films, etc. Working area: 500 x 740 mm Forming height: 150 mm Maximum film width: 540 mm Film thickness: up to 1.5 mm Installed power: 13 kW Busch pump New control system. The machine was overhauled in 2020 and is fully operational; it can be viewed in operation near Warsaw. Dwodpfx Aezu Nx Nsl Asc Price: 23,000 EUR

Year of construction: 1982, condition: ready for operation (used), A vacuum thermoforming machine Adolf Illig with a Busch vacuum pump is available. Form dimensions X/Y: 500mm/350mm, max. forming depth positive/negative: 100mm/100mm, max. mold height: 100mm, vacuum pump: Busch R5. Machine dimensions X/Y/Z: approx. 1700mm/1300mm/2600mm, weight: approx. 500kg. Documentation available. An on-site inspection is possible. Djdpfxezqu Eyj Al Ajwc

Year of construction: 2019, condition: ready for operation (used), A horizontal thermoforming, vacuum and packaging machine from Ulma for flexible and rigid film packaging from the food industry is available. Frame length: 4000mm, working height range: 850mm-950mm, max. film width: 420mm, max. film index: 360mm, max. forming depth: 130mm, max. film roll diameter: 350mm, max. film roll core diameter: 76mm, vacuum pump: Busch R5 RA 0302 D, machine dimensions X/Y/Z: approx. 1050mm/5000mm/1950mm. Including rigid and flexible film rolls. Documentation available. An on-site inspection is possible. Dodpfszpywrjx Al Aswc

Year of construction: 2014, condition: good (used), Used SEALPAC RE25 Thermoforming Packaging Machine (MAP/Vacuum) This SEALPAC RE25 thermoforming machine is a high-quality, industrial-grade packaging system designed for continuous operation in food production environments. Built in the Netherlands, SEALPAC machines are known for their durability, hygiene, and consistent sealing performance. This unit is in good used condition Technical Overview Djdpfx Asyvr Irsl Aowc Model: RE25 Power: 3-phase (230/400V, 50–60 Hz) Power consumption: ~17 kW Compressed air: 6–7 bar Gas (MAP): 4–6 bar Film width: approx. 300–650 mm Max forming depth: up to 160 mm Machine length: approx. 8 m. Contact Us Get in touch for: Price Inspection Additional details or videos

Condition: as good as new (ex-display), operating hours: 50 h, Uhlmann thermoform packaging system UPS 4 ETX for processing PVC forming film and aluminum lidding film Basic machine in modular technology and balcony construction, with 12 modules: - Molding film holder with 2 pneumatic clamping shafts for core diameter 76 mm, max. roll diameter 800 mm - Cutting and gluing table for shaped film - Shaped film unwinding, clocked - 3-zone contact heating: Dwodpfjtndpzjx Al Asc - 6 heating circuits, individually adjustable - Simultaneous heating of min. 3 feeds - Heating plates during machine stop automatic opening - Forming station with 4-column lifting table guide - Filling section, length 1,360 mm - Safety flap on the filling section Cover film unwinding on operating side with pneumatic expansion shaft for core diameter 76 mm, max. roll diameter 300 mm - Plate sealing station with 4 columns lifting table guide: - Integrated overload protection - Automatic lifting of the upper sealing sealing tool when the machine stops - Free module for the installation of an additional station - Clamping gripper feed - Punching station with blister lowering - Waste cutter with integrated motorized transport of the punching grid - Smoothing device - ET/DT perforating station - Monitoring of the compressed air supply with machine stop when the minimum the minimum value - Visio Scan - Electrically interlocked safety doors - Quick format change due to - plug-in format parts - Plug-in connections for cooling water supply - Main drive with frequency-controlled three-phase motor geared motor - Switch cabinet at the rear of the machine, swivel-mounted Paccontrol operating control - 10.4" TFT color display with 640x480 pixel resolution - Processor 68C030 - OS9 2.9 operating system - 2 MB SRAM, 2 MB Flash, 16 MB DRAM - SRAM card reader - IBM standard membrane keyboard - Centronics interface for external printer - PS2 interface for external keyboard - VGA interface for external monitor - Serial interface for diagnostic purposes - Arcnet interface - 8 serial interfaces for connecting devices Integrated shift register ISR Rejection of individual blister rows, e.g. overheated film in the heating station, products in the sealing station, etc. Machine control: Memory-programmable sequence control in modular design: - B&R - PLC control - Bus system with modules for CPU, inputs, outputs, temperature controller, cam controller, etc. - External program memory Technical data UPS 4 ETX: - Number of cycles: - ET range: min./max. : 15/ 50 T/min. depending on film quality, feed and format design - Format range: min./max. feed in filling area : 64/226 mm min./max. film width : 100/300 mm min./max. punching width : 28/284 mm max. drawing depth : 12 mm - Compressed air: - Inlet pressure: approx. 6 - 8 bar 4 Simtap feeders

Condition: like new (used), Thermoforming machine Dwodpfextp I Iox Al Aoc Stainless steel Compact and easy to use Up to 100 memorised programs Up to 10 cycles per minute 055 m³/h Power: 9.5kW Voltage: 400V / 50Hz / 3phs

Condition: excellent (used), Year of construction: 2017, operating hours: 748 h, functionality: fully functional, machine/vehicle number: 5231847, type of input current: three-phase, total width: 3,988 mm, total length: 4,740 mm, total height: 3,440 mm, input voltage: 400 V, compressed air connection: 6 bar, overall weight: 2,700 kg, Sheet thermoforming machine Machine for processing semi-finished products Maximum sheet size: 1,000 x 700 mm Minimum sheet size: 300 x 210 mm Maximum sheet thickness: 12 mm Minimum sheet thickness: 0.5 mm Djdpfx Aloznbp Te Aewc The machine is fully equipped and prepared for automatic feeding. Features upper and lower tool function, water-cooled molds. Intelligent control via pre-saved material parameters. The price includes a GEISS horizontal bandsaw HBS 1000.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, IN EXCELLENT CONDITION - ORIGINAL PAINTWORK Dsdpfsz Eh Egsx Al Aswc XYZ SMX 3500 CNC TURRET MILL PROTO TRAK CONTROL 3 AXIS CONTROL TABLE SIZE 1370 X 356 MM TRAVELS - X 770 / Y AXIS 500 / Z 500 MM 40 TAPER SPINDLE QUILL DIA 100 MM AIR DRAW BAR SPINDLE SPEED 40 - 5000 RPM TABLE GUARDS WEIGHT 2.4 TONS THERE IS ONE TOOL IN THE SPINDLE THAT WILL GO WITH

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Dodpfxox D Tbmj Al Ajwc Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Year of construction: 2002, condition: ready for operation (used), A thermoforming machine A&D with a cooling unit is available. Lower film width: 185mm, upper film width: 175mm. Documentation available. An on-site inspection is possible. Expected to be available from the beginning of 2027. Dodpfxjy Igc Ue Al Aowc

Condition: used, For sale are the Multivac forming and closing tools shown in the pictures. There are 2 sets. Each for a foil width of 420mm. Dwodpfjwth Uiex Al Ajc Multivac 19.200.1240.95 6x11cmx18cm tray size. Price: 2000 eur the other is 9x11.5cmx11cm item number 105793236, price 2000 eur.

Condition: good (used), Year of construction: 1990, operating hours: 45,350 h, machine/vehicle number: 1537, Hybrid machine for sheet or coil thermoforming. Equipped with a BE-type plate feeder without preheating. Equipped with a PR-type coil unwinder. Equipped with an upper and lower table. Managed by a Schleicher PDPF order manager. Quick clamping of reduction frames and tooling maximum width 700 mm Dwjdpfx Alstv Ivze Asc maximum plate size 1000x700 maximum sheet thickness 10 mm We take care of dismantling and loading onto your truck, which is available for collection.