Used Toggle Dowels 25 Pieces for sale (23,832)

Condition: used, Toggle plug, anchor hook -Manufacturer: Fischer, Toggle plugs 25 pieces/box -Type: KM 10 -Number: 11 boxes available -Price: per box -Dimensions cardboard: 240/180/H130 mm -Weight: 5.2 kg/carton Nedpfoipap Rjx Ag Ielh

Condition: good (used), Toggle bolt, anchor hook Nlsdpfxsipapxj Ag Ioh -Manufacturer: Würth, Toggle bolts 25 pieces/carton -Type: W-KDW M10 x 180, without tilting plate -Number: 27 boxes available Price: per carton -Cardboard dimensions: 270/210/H100 mm -Weight: 3 kg/carton

Condition: good (used), Machine reamers, reamer, reaming tool, locating knife cutting set Nodpfxeiay Haj Ag Islh -Mounted reamers: Machine reamers, 25 pieces -Hole: Ø 16/19/20/22 mm -Diameter: 28.5 to 53 mm, see photo parts list -Overall dimensions: 240/230/H100 mm -Total weight: 9.8 kg

Condition: ready for operation (used), Year of construction: 1985, machine/vehicle number: 1304, functionality: fully functional, pressing force: 367 t, stroke length: 100 mm, table width: 525 mm, table length: 430 mm, table height: 800 mm, No minimum price – guaranteed sale to the highest bidder! EXW – Buyer is responsible for dismantling and loading! The machine was rebuilt in 2018! TECHNICAL DETAILS Press force: max. 3,600 kN Nlsdpfxez Tf Eno Ag Ish Ram stroke: max. 100 mm Ram adjustment: 40 mm Stroke rate: 40 strokes/min Table area: 430 × 525 mm Table height: 800 mm MACHINE DETAILS Connected power: 7.5 kW Mains connection: 3-phase, 380 V, 50 Hz Control voltage AC: 220 V Control voltage DC: 24 V Main motor power: 7.5 kW Oil capacity: 50 l Ambient temperature: +5 °C to +40 °C Average temperature over 24 h: max. +35 °C Humidity: 30–95 %, non-condensing Altitude: 1,000 m above sea level Noise level: ≤ 70 dB Dimensions & Weight Dimensions (W x D x H): 1,200 x 2,000 x 2,400 mm Space requirement: approx. 1,500 mm Machine weight: 8,000 kg Control cabinet dimensions: 800 × 1,200 × 300 mm Control cabinet weight: approx. 100 kg EQUIPMENT Operating manual Testing information Digital documentation Note: Induction unit is not included in the scope of supply.

Condition: good (used), Turning tool holder, tool holder, turning tool, turning tool holder, tool holder, axial tool holder, bar gripper, thread cutting head, boring bar holder -Number: 25 pieces turning tools Nlodpfx Agogl Duhs Ish -Take: Ø 30 mm -Various types: see photos, more pictures can be sent -Sale: is only sold as a whole -Dimensions: 400/655/H630 mm -Weight: 34 kg

Condition: refurbished (used), Year of construction: 2014, Used Machine Year of manufacture: 2014 Condition: The machine has been factory-overhauled by Ganner Features and Technical Specifications: Complete standard configuration including: - Support with linear guide consisting of: 1 single-spindle horizontal drilling unit, 0.65 kW motor, 70 mm stroke Tool speed selectable via operator software (3000/5000/8000 rpm) 1 blow-out, gluing, and dowel-driving station for dowels Ø 8 mm, dowel length 25–50 mm - Fully automatic, electronically controlled central lubrication - X-axis NC-controlled, with working length 1300 mm, travel speed max. 105 m/min. - Z-axis manually adjustable via mechanical digital counter, position adjustable via support table 5–40 mm - Dowel drive-in overhang adjustable from 7–20 mm via a mechanical digital counter; drilling depth from 0–35 mm (for drill bit length GL 70 mm) is automatically adjusted with the drive-in overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GLUE/WATER selector switch for flushing the glue system, each with: 1 stainless steel tank for 7.5 kg of glue and 7.5 l of water - Indicator light showing remaining glue levels in the glue tank - 1 left side stop, 1 right side stop, and 1 center stop (all removable) - 4 start buttons for individual processing of 1–4 workpieces Nlodszlbrvopfx Ag Ish - 4 pneumatic 10° angle clamping cylinders for workpiece thicknesses up to 80 mm, workpiece length (Y) min. 70 mm - 1 extraction funnel, connection Ø 80 mm - 1 TCT control unit with: Built-in industrial PC, including Beckhoff TWINCAT soft PLC, operating temperature range 0–50°C, 15-inch capacitive TFT industrial touchscreen, operating system: WINDOWS 7 - Programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE, or GRID dimensions, automatic workpiece mirroring and operation optimization, 4 work areas assignable to different programs, graphical workpiece display, parametric programming, zero-point offset, programmable worklists, error diagnosis with plain text Optional equipment: - 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle - 1 Z-axis with NC-controlled, dynamic positioning for height adjustment of the drilling and dowel-driving station (programmable from 5–40 mm), travel speed max. 30 mm/sec. - 1 single-spindle vertical drilling unit drilling from the TOP, 0.65 kW, (3000/5000/8000 rpm), position (Y) manually adjustable via a mechanical digital counter from 5–40 mm, drilling depth (Z) max. 30 mm (with drill bit length GL 57 mm), Workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (including drilling depth compensation, e.g., for Häfele Minifix) - 4 vertical 10° angle clamping cylinders with mount - 1 keypad with mount Availability: available shortly Location: DE-63934 Röllbach

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Smart Touch Numerical Control with Sintra HD Software Panel height mm 10 – 60 Solid mm 22 Pvc/Abs mm 3 Feed speed up to mt/min 25 Working height electronically adjustable by N.C. Motorized and electronically adjustable panel support guide by N.C. Anti-adhesive group Rectifying group with 2 motors electronically adjustable by N.C. Reel holder plate with n° 1 position Gluing group for EVA hot melt glue with glue pot End trimming group with 2 motors with dynamic suction system that follows the blades in each of its movements. Staggered trimming/cornering unit with 2 motors electronically adjustable by C.N Anti-stick unit Njdpfxewlbxlj Ag Ielh Rounding unit with 2 multifunction motors (cornering unit + rounding unit) Electronic edge scraping unit electronically adjustable by C.N Glue scraping unit Brush unit “SP-501” Automatic piece return system with Winner 4A bridge unloading

Condition: used, Year of construction: 2000, 220V, 1 phase, 50Hz Air connection: 6 bar Complete in standard design with: - Dowel feed via electronic vibratory feeder - Automatic dowel length and dowel diameter control - Fully automatic electronic control with program selector switch GLUING – APPLYING – INSERTING - 8-stage glue quantity selector switch via time pre-selection by electronic control - Closed glue system with 6 bar glue pressure via glue nozzle for glues with a viscosity of 150 to 350 mPas - Selector switch GLUE/WATER for rinsing the glue system - Control lamp for displaying the remaining glue quantity in the glue container - 1 stainless steel container for 5 kg of glue and Nlsdpfx Agszktq Is Ish - 1 stainless steel container for 5 liters of water for rinsing including 1 gun for dowels Ø mm, dowel length 25 - 50 mm, pre-set to 35 mm, insertion overhang 7 - 20 mm Location: Nattheim

Condition: excellent (used), Metal band saw blade, band saw blade, metal saw band -Manufacturer: Wikus, Bi-metal saw band M42 VPE with 10 pieces unused Ovp Nljdpfx Ajvu S Tmeg Ieh -Type: Biflex Kobali M42 3660 x 25 x 0.90 mm -Quantity: 2x box available -Price/Distribution: per box -Transport dimensions: 790/600/H35 mm -Weight: 8.2 kg/piece

Condition: excellent (used), Connectors, plugs, sensor modules -Manufacturer: Wago, Winsta ECBT2 connectors, 25 pieces Nlodpfx Asr Dgitog Ieh -Connector: Wago 3-pin with strain relief housing -Quantity: 6 boxes of 25 pieces each available -Price: per carton -Cardboard dimensions: 200/185/H55 mm -Weight: 0.6 kg/carton

Condition: good (used), Tool holder, milling holder, milling tool Nledpfecwb Nnox Ag Ieh -Number: 25x SK50 mounts -various: versions -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -Sale: only complete -Weight: 100 kg

Condition: ready for operation (used), functionality: fully functional, operating hours: 12,341 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load Capacity Load capacity: 2,500 kg Mast Mast type: Triplex mast with full free lift Lifting height: 6,430 mm Free lift: available Drive and Battery Drive type: Electric Battery type: Lithium-ion Battery year of manufacture: 04/2019 Battery voltage: 90 V Battery capacity: 268 Ah Measured idle voltage: 95.3 V Hydraulics Hydraulic valves: 3rd and 4th valve Fork positioner: Multi-directional fork positioner Side shifter: available MACHINE DETAILS General Manufacturer: Linde Type: E25 Year of manufacture: 2019 Operating hours: 12,341 h Own weight: 5,300 kg Dimensions Overall length: 3,650 mm Overall width: 1,150 mm Overall height: 2,824 mm Inspections and Service Service valid until: 09/2027 UVV (occupational safety) valid until: 09/2027 EQUIPMENT Full cabin without driver's door Heater Windshield wiper Tilt angle display White, non-marking tires LED work light (front) LED work light (rear) Road traffic lighting with turn signals Orange warning light Safety light (front) Safety light (rear) Rear view camera Comfort seat All dimensions are approximate. No guarantee is given for typographical or measurement errors. Nsdpjz R D A Tofx Ag Iolh Collection conditions: Side loading up to 6 t is possible with a large forklift truck on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 t and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 254

Condition: used, Screw clamps, pipe clamps, pipe fastening, Hose clamps -Manufacturer: Stedo 7 Norma, hose clamps 25 pieces/ box -Clamping diameter: 110 to 130 mm -Band width: 12mm -Material: steel, galvanized -Number: 4 boxes available -Price: per box -Dimensions cardboard: 325/275/H100 mm -Weight: 1.7 kg/box. Nsdpfxjipwcts Ag Iolh

Year of construction: 2002, operating hours: 1,209 h, condition: good (used), functionality: fully functional, power: 7.5 kW (10.20 HP), volume flow: 6,000 m³/h, Used welding fume extraction system with few operating hours. In good condition. Available immediately. Nodpfx Aj Afv H Eog Islh

Condition: used, Metal band saw blade, band saw blade, metal saw band -Manufacturer: Wikus, 10 pieces of bi-metal saw band M42 unused -Type: Biflex Kobali M42 3700 x 25 x 1 mm -Quantity: 10x sheets available -Price: complete -Transport dimensions: 800/700/H30 mm Nledpfxoquftho Ag Ijh -Weight: 8.2 kg

Condition: good (used), Year of construction: 1992, Single-piece sanding machine sanding from top and bottom electric height adjustment with digital display continuously variable feed speed star/delta starter pneumatic belt tensioning main switch sanding belt oscillation finishing brush unit top and bottom, manual height adjustment Working width: 190 mm Working height: 4 - 150 mm Min. workpiece length: approx. 280 mm Abrasive belt dimensions (L x W): 1850 x 200 mm Feed speed: 5 - 25 m/min Installed power: approx. 14 kW Extraction port diameter: 2 x 180 mm Dimensions (L x W x H): 2000 x 1000 x 2050 mm Weight: approx. 1800 kg Nledpfewyda Usx Ag Ish Incl. infeed and outfeed roller conveyor (L = 1600 mm, non-driven) Note on used machines: • Technical data subject to errors and prior sale. • Quoted prices are ex-works – loaded free of charge! • The machines have been cleaned and function-tested. • All machines are sold as inspected, with no claims to warranty. Buyers are welcome to inspect machines at the location. • Special agreements are only valid in written form. (We answer inquiries only when your address and telephone number are provided!)

Condition: like new (used), Year of construction: 2021, functionality: fully functional, operating hours: 100 h, input voltage: 415 V, input frequency: 50 Hz, pressing force: 120 t, stroke length: 500 mm, table width: 1,300 mm, table length: 2,500 mm, throat depth: 1,000 mm, ram plate width: 1,300 mm, ram plate length: 2,500 mm, distance table to ram: 1,000 mm, total length: 3,000 mm, total width: 1,800 mm, total height: 2,750 mm, overall weight: 2,900 kg, Equipment: CE marking, SCM Sergiani PF Cold Platen Press, New 2021, Model PFH DIGIT 25/13 Nlsdpfe Ad Hatex Ag Ish Platen area 2500 x 1300 mm, with 6 x 90 mm dia chromed hydraulic cylinders giving 120 tons pressure via a double rack and pinion system connected by a torsion bar to grant a planar movement of the movable press platen. Controlled by Siemens colour touch screen control panel. Suitable for pressing plasics, composites, wood inc door panels etc and some light sheet metalwork.

Condition: used, Year of construction: 2004, functionality: fully functional, Equipment: documentation/manual, CMZ Turning Center 4 Axes: X, Z, C, B Type: TL 25 BTM Nlodpfxjz Ih A De Ag Ish Year: 2004 CNC: GE Fanuc Series 18i-TB Video Available Inspection Possible Jaw Chucks: Included ✅ Tool Holder: Included ✅ Documentation: Included ✅ Chip Conveyor: Included ✅

Condition: excellent (used), Collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets Nedpfxeb A Stkj Ag Ijlh Sizes: various -Sale: only as a package -Weight: 0.8 kg

Condition: excellent (used), Year of construction: 2019, Fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial fan, axial fan -Housing: galvanized steel Nledpfx Agsxd T D Ie Ijh -Condition: Fans are unused (stock items) -Manufacturer: Fläkt Woods, axial fan axial fan -Type: 90JM/25/4/9/24 3S M3AA132MA INT BMLESS -Power: 7.5 kW 1462 rpm -Fan wheel: Ø 900 mm -Number: 2x fan available -Price: per piece -Dimensions: 1140/1140/H610 mm -Weight: 140 kg/piece

Condition: used, functionality: fully functional, turning diameter over bed slide: 2,500 mm, total length: 3,750 mm, total width: 850 mm, total height: 1,350 mm, spindle speed (max.): 1,000 rpm, Global Nordic 25 lathe. Equipped with a three-jaw chuck, a four-jaw chuck, an eccentric four-jaw chuck, and various drills. 18 speeds. Hollow spindle, 78 mm. Nodpfj Aa Iygsx Ag Ijlh Speed n=rpm 12.5. 400V.

Condition: not inspected (used), Year of construction: 1995, travel distance X-axis: 650 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 410 mm, controller manufacturer: Mitsubishi, controller model: Meldas 50 M, overall weight: 4,200 kg, spindle speed (max.): 6,000 rpm, spindle nose: SK 40, Vertical Machining Center Manufacturer: LEADWELL Model: VMC 25 Year of manufacture: 1995 Control: Mitsubishi Meldas 50 M Technical specifications: - X-axis travel: 650 mm - Y-axis travel: 410 mm - Z-axis travel: 410 mm - Max. spindle speed: 6,000 rpm - Tool holder: SK 40 Njdezz S R Uopfx Ag Ijlh - Machine weight: approx. 4,200 kg - Dimensions (L x W x H): approx. 2,400 x 2,400 x 2,500 mm Condition: used, untested In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if noted in the additional information. Subject to technical changes, errors, and prior sale.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, volume flow: 10,550 m³/h, overall weight: 360 kg, inlet: 350 mm, extraction nozzle diameter: 350 mm, 2 pieces blue Nestro FAN Nlodpfx Ags Aa It He Ish Elmot motor 11KW, Inlet: 350mm, 10.550m3/h. 1 pieces gray Remb Fan Siemens motor 11Kw, Inlet: 300mm, circa.: 10.000m3/h All the fans can be tested; they are in excellent technical condition. The price is per item!

Condition: excellent (used), Year of construction: 2020, HOMAG CABTEQ S-250 / MPH 450/25/07 carcass press, year of manufacture 2020. Carcass press for furniture manufacturing. Model: MPH 450/25/07. Collection possible from December 15th. Earlier collection only possible by arrangement. Inspection by appointment. Disassembly, loading, and transport will be arranged. Nlodpfx As Adub Eog Ijh Price on request. Contact: DS-Maschinen – Owner: David Schulz.

Condition: ready for operation (used), Year of construction: 2008, Available immediately ex-works: CNC press brake AMADA Type HFT 80 - 25 Year of manufacture 2008 Touchscreen control Pressing force 80 tons Working length 2570 mm Distance between uprights 2125 mm Overhang 420 mm Approach speed 100 mm/s Working speed 10 mm/s Retraction speed 100 mm/s Stroke 200 mm Overhang 420 mm Drive power 9 kW Weight 5750 kg Nedpfe Afcmxex Ag Iolh Complete set of tooling Price: EUR 19,500.00 plus VAT, ex-works.