Used Thoman Mot. Rod Steel Twisting Machine for sale (80,802)

Year of construction: 1985, condition: used, machine/vehicle number: 112-176, Technical specifications: - Bending process controlled by automatic or manual operation. - Bending capacity for square steel ST 37 up to approx. 25 mm. - Bending capacity for flat steel ST 37 up to approx. 30 x 8 mm. - Adjustable bending length between the rotating units up to approx. 1000 mm. - Clamping plate with various mounting holes for different profiles. - Tailstock / backstop. - Preselection of bending time / preselection of bending length and rotation angle. - Right-hand / left-hand operation. - Space requirement: approx. W 1750 x H 1100 x D 500 mm. Gjdoc I Snzopfx Amtjuh - Drive: 400 V / 0.75 kW. - Weight: approx. 150 kg.

Condition: used, SincoTec Type: Exciting Mot Resonance test bench POWER SWINGLY 20 kN The POWER SWINGLY BigTable resonance test bench is designed as a dual-mass vibrator. It consists of a vibration head, which is excited via an asynchronous motor with frequency control and an eccentric motor. The vibration head is located in the upper part of the machine and generates the dynamic amplitude. The vibration head is supported on the upper traverse via pre-tensioned coil springs and is guided centrally. The center load drive is located in the lower part of the machine and applies the static preload with the aid of a geared motor via a spindle drive. The test chamber is located above the mounting table and is bounded upwards by the adjustable traverse. The control of the test bench is carried out by the EXCITING MOT control system. The complete control electronics for the control system are housed in an industrial PC cabinet. The control cabinet is made of powder-coated steel sheet and meets protection class IP 50 according to EN 60529. Technical data: General data of the test bench: Overall height of the test bench 1840 to 2240 mm Height of the machine table 1030 mm Width of the test bench 800 mm Depth of the test bench 1500 mm Height of the test chamber max. 600 mm (without force sensor) Free column passage 550 mm Maximum force amplitude 10000 N Maximum total force ±20000 N Maximum stroke ±5 mm Test frequency 30 to 110 Hz Accuracy of the measuring sensors min. class 1 (according to DIN EN 10002-3) Weight of the test bench approx. 1880 kg Max. weight of the clamping device 150 kg General data of the control cabinet: Overall height of the control cabinet 1900 mm Height of the table top 1080 mm Width of the control cabinet 650 mm Depth of the control cabinet 700 mm Weight of the control cabinet 152 kg Color RAI 9006 (white aluminum), table top Midnight Conditions for the installation site: Space requirement 2.5 x 2.5 m Required ceiling height 2.8 m Floor load-bearing capacity 170 N/cm² Voltage supply 400 V / 50 Hz (right-rotating field) Connection plug CEE socket, 5-pole, 16 A Fuse 16 A Connection and environmental conditions Mains conditions: Voltage 400 V three-phase with PE conductor and protective earth, right-rotating field Voltage fluctuations < ± 10% Short-time voltage dips < 20 ms Limits for permanent interference Radio interference level A according to VDE0871 Frequency 50 Hz ± 1% Protective earth Ground resistance < 0.3 Ω Model: POWER SWINGLY MOT Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) Godpfezii Awsx Amtouh We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), For sale: MC9050B industrial round wood rod milling machine, manufactured in 2018, designed for producing round wooden poles and cylindrical wooden components such as tool handles, broom handles, furniture parts, and similar products. Specifications: • Model: MC9050B • Year of manufacture: 2018 • Power supply: 380V (Three-phase) • Working diameter: 15–50 mm • Minimum workpiece length: 600 mm • Main motor: 3 kW • Approximate weight: 350 kg Condition: • Excellent working condition. • Complete machine, ready for immediate use. • Inspection and testing are welcome. Guodpjzmt U Esfx Amteh

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: J22143, total length: 5,200 mm, total height: 2,391 mm, type of input current: AC, outer diameter of label roll: 400 mm, inside diameter of label roll: 75 mm, overall weight: 800 kg, input voltage: 380 V, Performance specifications: Product: Minimum height 40mm Maximum height 330mm Maximum diameter 150mm Minimum diameter 15mm Labels: Maximum outer roll diameter 400mm Inner roll diameter 75mm Maximum label width 150mm Application speed min 70 ppm Conveyor speed Guodpfx Aszv S Rwjmtsh max (infinitely adjustable) 27.5 m/min min 7.5 m/min Dimensions Overall height 2391mm Length 5200mm Power supply Electrical 380V AC (three-phase) 50/60Hz, 4kVA Pneumatic 0.06 m3/min Protection class IP20 Parameter control via Allen Bradley PanelView Plus 700 Condition: Functional, professionally dismantled Note! System is sold without the Cognex camera system Further information available upon request

Condition: used, Year of construction: 2009, For sale: Band-All BA32-102 Banding Tool The Band-All BA32-102 is a high-quality, durable banding tool designed for heavy-duty applications. It efficiently secures bundles with precision, offering ease of use and long-lasting performance. Perfect for industrial and commercial use, this tool ensures a tight and secure band every time. In excellent condition and ready for immediate use. Gusdpfx Amsv Sq Hyotjh Contact for more details or to arrange a viewing! More photos and full specifications: / For sale: Band-All BA32-102 Banding Tool

Year of construction: 2015, condition: good (used), For Sale: Nawi Stainless Steel Bin Washing Machine Make: Nawi Year of Manufacture: 2015 Specifications: - Completely stainless steel - Steam heated - Equipped with infeed conveyor belt, width 1100 mm - Tilting device with infeed guide - Discharge screening system - Central control cabinet with touchscreen operation - Wash chamber dimensions: 2500x1700x1300 mm - Infeed + outfeed If you have any questions or comments, please feel free to contact us. Price includes disassembly Gjdpsyiyxkofx Amteuh Loading is included. Transport by arrangement Inspection possible on site. Kind regards, Leo Holland

Year of construction: 2007, operating hours: 4,100 h, condition: good (used), functionality: fully functional, The machine is not more needed for our production and therefore its for sale. The machine is in our ownership from 2007 and it is regularly maintained. Everything works normal. Dismantling and load on truck are in price. Some more informations: 5-axis profile machining centre Guedpfx Amjwwtw Dstjh Designed for flexible and efficient machining of aluminium Autonomous clamp positioning Max. working lenght: 9.300 mm 12 pneumatic clamps Tool magazine with 20 tools capacity and saw blade 500mm Spindle working hours 4100h Additional tehnical specifications available on request

Condition: excellent (used), METALLKRAFT Profile Steel Shear / Punch HPS 65 DS Combined Hydraulic Profile Steel Shear and Punch with Punching Station, Notching Station, and Flat Steel, Angle Steel, and Profile Steel Shear – enables simultaneous operation at punching and profile steel shear. Punching Station - Punching Force: 65 t - Punching Capacity: max. Ø 26 x 20 / Ø 57 x 10 mm* - Throat Depth: 305 mm - Stroke Length: max. 55 mm - Number of Strokes: 25 strokes/min - Working Height: 900 mm Rod Steel Shear - Cutting Capacity Round: max. Ø 45 mm* - Cutting Capacity Square: max. 45 x 45 mm* Angle Steel Shear - Cutting Capacity L-Profile 90°: 120 x 120 x 12 mm* - Cutting Capacity L-Profile 45°: 70 x 10 mm* - Cutting Capacity U/I Profile: 120 x 58 mm - Cutting Capacity T-Profile: 90 x 11 mm - Working Height: 1,140 mm Flat Steel Shear - Cutting Capacity 90°: max. 300 x 20 / 375 x 15 mm* - Miter Cut 45°: max. FL 100 x 15 mm* - Blade Length: 380 mm - Working Height: 900 mm Notching Station - Material Thickness: max. 10 mm* - Notching Width: max. 45 mm - Notching Depth: max. 90 mm - Notching Station: 100 x 100 x 10 mm Machine Data - Motor Power: 5.5 kW | 400 V - 50 Hz - Dimensions (LxWxH): 1700 x 950 x 1880 mm - Weight (net): approx. 1,600 kg Shipping on pallet via freight forwarder possible Europe-wide. Additional machines available! Take a look at our listings. If you have any questions, feel free to contact us by message or phone: Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg Gedpfjxizanex Amtsuh

Condition: used, SincoTec Type: POWER SWING 20 kN POWER SWING 20 kN resonance testing system Sincotec Power Swing 20 kN resonance testing system Manufacturer's maintenance performed General information For sale is a used Power Swing 20 kN resonance testing system from Sincotec Test Systems GmbH. The testing system was used in a single-shift operation, and all maintenance work was performed regularly by the manufacturer. Special features: Robust construction for continuous operation Precise resonance testing up to 20 kN Manufacturer's maintenance available Ideal for research, testing, and development applications Technical data – Testing system Feature / Value Overall height of testing system 1215 mm (without clamping device) Width of testing system 2005 mm Depth of testing system 1205 mm Maximum force amplitude 10 kN Maximum total force ±20 kN Accuracy of measuring sensors min. Class 1 (according to DIN EN 10002-3) Technical data – Control cabinet Feature / Value Overall height of control cabinet approx. 1800 mm Height of tabletop 1080 mm Width of control cabinet 650 mm (narrow tabletop) / 1450 mm (wide tabletop) Depth of control cabinet 700 mm (narrow tabletop) / 800 mm (wide tabletop) Weight 152 kg (small tabletop) 187 kg (large tabletop) with (granite plate) 247 kg Conditions for the installation site Feature / Value Space requirement 4.3 × 3.0 m Required ceiling height 2.5 m Floor load-bearing capacity 234 N/cm² Mains conditions Feature / Value Voltage 400 V three-phase with neutral conductor and protective earth Phase sequence Right-rotating field Voltage fluctuations ≤ ±10 % Short-time dips < 20 ms Limits for sustained disturbances Radio interference level A according to VDE 0871 Guodozii A Dopfx Amtsh Frequency 50 Hz ± 1 % Protective earth / Grounding resistance < 0.3 Ω Connection and protection Feature / Value Voltage supply 400 V / 50 Hz (Right-rotating field) Connection plug CEE socket, 5-pole, 16 A Protection 16 A Weight of testing system approx. 3.6 t Max. weight clamping device 250 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: ready for operation (used), functionality: fully functional, control type: manual, actuation type: hydraulic, Geka (Spain) Hydraulic Punching, Shearing, and Notching Machine Model: Hydracrop–55/110A Year of Manufacture: 2001 Flat Bar Shear Capacity: 300 x 15 mm / 200 x 20 mm Blade Length: 305 mm Square: 25 mm Working Height: 880 mm Angle Shear Capacity: 1100 kN Deformation-free Angle Iron: 120 x 120 x 10 mm Angle Iron 45° Shear: 70 x 70 x 7 mm Round and Square Bar Shear Round Steel: 40 mm Square Steel: 40 mm Notcher Gsdpfeyxpawsx Amtjuh Sheet Thickness: 10 mm Angle Iron: 100 mm Notch Depth: 90 mm Notch Width: 42 mm Punching Station Capacity: 550 kN Maximum capacity with quick-change system: Ø 40 x 10 mm / Ø 20 x 20 mm Throat Depth: 250 mm Stroke Length: 60 mm Working Height: 1085 mm General Specifications Number of strokes per minute at 20 mm stroke: 25 Power: 3 kW Net weight: 1320 kg Gross weight: 1518 kg Dimensions (L x W x H): 1600 x 1100 x 2000 mm Machine Details - 2 cylinders: one for the punching side, one for the shearing side - Punching unit with quick-change system - C-frame die holder + extra support - Nipple and die up to Ø 40 mm selectable - Flat bar shear incl. support table and 45° and 90° guides - Angle shear - Round and square bar shear (suitable for mounting U and I profiles as well) - Rectangular notcher - Emergency stop - Key switch for notcher safety - Selector switch for deep or shallow punch/shear operation - Selector switch for foot pedal / back gauge - Stroke adjustment for punch and shear side - 2 foot pedals - Scrap collection tray for punch slugs - Dutch instruction manual Includes: Punch table incl. back stops Notching table incl. back stops Electric length stop 1000 mm 30 sets of punch nipples Price of the Geka Hydraulic Punch/Shear/Notch Machine: €16,500 Machine is as new, original paint, like new, original finish Delivery conditions: Delivery time: from stock, subject to prior sale Delivery: ex works Baarle-Nassau Payment: before collection Prices: net, excluding VAT Machinehandel De Leeuw BV cannot be held liable for discrepancies between the technical specifications in this offer and the actual machine, accessories, and/or parts. Machines, accessories, and parts are sold as-is and as known to the buyer. We cannot provide a warranty for used machines, accessories, and parts. Delivery terms: Delivery time: ex stock, excluding VAT Delivery: ex works Baarle-Nassau Payment: before collection Prices: net, excluding VAT Machinehandel De Leeuw BV is one of the few companies in Europe that stocks and sells primarily used Kardex Remstar automatic lift and rotating warehouse systems. We install and/or dismantle these systems safely with VCA-certified engineers and have been doing so for more than 33 years. Best regards, Antoine de Leeuw Machinehandel De Leeuw BV Oordeelsestraat 7-B 5111 PA Baarle-Nassau The Netherlands VAT No.: NL800103026B01 Chamber of Commerce Tilburg 18034279

Condition: excellent (used), Twist-Off Automatic Capping Machine EMERITO 2.8 – Jar Sealer The EMERITO 2.8 automatic Twist-Off capping machine is designed for the automatic placement and sealing of Twist-Off metal caps onto glass jars in industrial food packaging lines. Manufactured by EMERITO, the machine automates the process of feeding, positioning, and sealing the caps, providing a uniform and continuous seal for the containers before subsequent processing, labeling, or packaging stages. Its construction, primarily in stainless steel, integrated conveyor, and automatic sealing system make it particularly suitable for canning and professional jar packaging lines. MAIN FEATURES -Manufacturer: EMERITO -Model: 2.8 -Type: Automatic Twist-Off capping/sealing machine -Application: jars and glass containers -Sealing with Twist-Off metal caps -Automatic container feeding -Automatic cap positioning and sealing -Integrated container conveyor -Continuous industrial operation -Motorized sealing system -Construction primarily in stainless steel -Integrated control panel -Adjustments for adaptation to the installed format -Hygienic design for the food industry -Integrable into automatic filling and packaging lines APPLICATION The EMERITO 2.8 is designed to automate the sealing of jars using Twist-Off caps. The pre-filled containers are transported to the sealing area, where the cap is positioned on the jar and subsequently adjusted using the capping system. Once sealed, the containers automatically continue to the next stage of production. It can be integrated with: Filling and dispensing machines Cap feeders Jar conveyors Inspection systems Container washers and dryers Pasteurizers Autoclaves Labeling and coding machines Case packers and end-of-line equipment APPLICATIONS Especially suitable for canning industries, manufacturers of sauces, jams, pickles, vegetables, prepared dishes, and other foods packaged in glass jars. The EMERITO 2.8 provides an automatic solution for lines that require continuous, uniform, and reliable Twist-Off sealing, and can be integrated into both existing facilities and complete packaging lines. Gjdpfx Aezw Hngjmtsuh Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Year of construction: 1985, condition: used, functionality: fully functional, PM 5 PAPER MACHINE + STOCK PREPARATION / DEINKING PLANT + GOEBEL U16M !contact for full details and photos! Package sale of an integrated paper production installation in Hainsberg, Germany. The package includes the PM 5 paper machine, its associated stock preparation and deinking plant, and a Goebel U16M roll slitter rewinder. PM 5 was originally built in 1985 and modernised several times. Main sections: approach-flow system – PAMA; headbox – Voith; Fourdrinier section – PAMA; top-wire former – Valmet; press section – PAMA; dryer sections – PAMA; SpeedFlow system – Voith; after-dryer section, calender and Pope reel – PAMA. Reported modernisations: Valmet top-wire former (1994); approach-flow system expansion/modernisation (2002–2003); MAP quality-control system (2006); Voith SpeedFlow (2009); automatic tail cutter (2025). PM 5 specifications: Gsdpfx Asz Hvmhemtjuh • Working width: approx. 2,730 mm; trimmed width: approx. 2,640 mm • Maximum speed: up to 600 m/min • Maximum gross capacity: up to 150 tonnes/day • Basis-weight range: approx. 45–130 g/m² • Grades produced include office, copy, writing, printing, envelope and newsprint papers • Installed electrical power: approx. 2.5 MW • Steam consumption: up to approx. 16 tonnes/hour Stock preparation/deinking plant: • Normal capacity: approx. 125 tonnes/day; up to approx. 140 tonnes/day under suitable raw-material and process conditions • Essential components listed in the available technical documentation are reported to remain installed on site • Older Siemens S5 and Teleperm control and automation system Goebel U16M: built in 2005, machine no. 053-9031. Working width 2,800 mm; maximum speed 2,000 m/min; maximum unwind diameter 2,000 mm; maximum rewind diameter 1,500 mm; minimum cutting width 150 mm. Available accessories include winding shafts and an edge-trim extraction system with shredder and flat turbo disintegrator. Operating status: Production stopped on 23 January 2026. According to the seller, PM 5 and the stock preparation/deinking plant were operating until the controlled shutdown. The Goebel U16M was also reported operational until that date, with no significant functional faults Maximum capacities depend on paper grade, raw material and operating conditions. Inspection by appointment. Price on request.

Condition: used, Dinnissen Dima 1200 bag emptying machine bag cutting machine stainless steel Machine has been overhauled. Equipped with new running wheels, bearings, clamps, etc. Capacity: 1200 bags/hour Completely made of stainless steel Drum motor power: 2x 1.5kW 124rpm Cutting rotor motor power: 2x 5.5kW 211rpm Cutting chamber with double rotor is mounted on top of the infeed hopper of the drum sieve Guedpfx Amex D U Nlotoh See our other advertisements VMA Wekerom

Condition: used, Year of construction: 2003, operating hours: 81,060 h, functionality: fully functional, machine/vehicle number: 921083, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, total height: 2,000 mm, total length: 2,020 mm, total width: 2,050 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 220 mm, workpiece width (max.): 550 mm, workpiece length (max.): 1,000 mm, type of input current: three-phase, table width: 450 mm, table length: 680 mm, table height: 1,000 mm, empty load weight: 2,450 kg, table load: 750 kg, input voltage: 400 V, tank capacity: 760 l, distance table to quill: 220 mm, input frequency: 50 Hz, input current: 18 A, Equipment: documentation/manual, The table has a hard chrome finish. Godpfxez Spd Io Amtsuh In addition, we also sell the matching EasyChange XT 4-position workpiece changer from Erowa; see the nameplate for the model. Pick-up only.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 250206, total width: 550 mm, total length: 1,500 mm, total height: 850 mm, empty load weight: 300 kg, Concrete rebar cutting machine, Benelux Machines GQ45 (2025) Technical specifications: - Type: Benelux Machines GQ45 (Steel Bar Cutting Machine) - Year of manufacture: 2025 - Cutting capacity: concrete rebar Ø 6-32 mm, round steel Ø 6-36 mm - Motor: 4 kW, 380 V, 50 Hz, 3 phases (2980 rpm, IP44) - Dimensions: 1500 x 550 x 850 mm - Weight: approx. 300 kg - CE marking General information: - Foot pedal - Guide rollers on the feed side Gusdpfx Aeyw N Rgsmtjh - Drive with V-belts, with protective cover - Safety switch with residual current device (RCD) on the machine - Wheels and lifting eyes, easy to move and transport Questions or would you like to see more photos? Feel free to contact us.

Year of construction: 2003, condition: used, functionality: fully functional, machine/vehicle number: 1500050182, Elumatec SBZ 150 5-axis profile machining center for aluminum profiles up to 7.3m and thin-walled steel profiles. Due to a production changeover to a tube laser system, we are selling our fully functional Elumatec SBZ 150. Service was performed by Elumatec in March 2026, and we have not used the machine since then. Interested parties are welcome to visit us at any time. We would be happy to demonstrate and allow you to test the machine. Technical data: - X-axis travel: 7300mm - Y-axis travel: 1000mm - Z-axis travel: 650mm - A-axis swivel angle: 0-90°, freely programmable - C-axis swivel angle: 0-355°, freely programmable - Max. machining length without end-face machining: 7300mm - Max. machining length with end-face machining: 6980mm - Tool changer with 10 positions, as well as a saw blade holder - 8 material clamps Gusdpsy Dvq Hofx Amteh - Tool holder HSK63 - Spindle power 15kW / 22000 RPM - 2-layer machining - Minimum quantity lubrication - Central lubrication - Saw blade 400mm Machine is available immediately! Space requirements can be found in the layout in the appendix. The transport instructions can also be found in the appendix; if you have any questions, please do not hesitate to contact us. Due to the planned re-installation, dismantling, loading, and transport should preferably be organized by the buyer. Various auxiliary tools can be provided upon request, if available. All information and dimensions have been provided to the best of our knowledge and belief, but no guarantee can be given for completeness and accuracy! The sale is made as is, without any guarantee, return policy, or similar. Subject to prior sale.

Condition: used, Used Urschel cutting machine, built entirely in stainless steel This Urschel cutting machine stands on castors and is built in stainless steel. Product travels from the hopper into the cutting section; whatever has been cut leaves the machine on the other side through the discharge chute. Drive is by electric motor and belts, and the controls sit in their own box on the machine. Godpjz Ndk Hofx Amtouh The type plate is missing, so the year of manufacture and the exact type are not known. Testing with your own product can be arranged. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Cutting machine Infeed: Hopper Drive: Electric motor with belt drive Controls: Own control box on the machine Construction: Stainless steel, on castors

Year of construction: 2018, operating hours: 5,750 h, condition: used, functionality: fully functional, overall weight: 3,800 kg, total length: 7,650 mm, total width: 2,180 mm, total height: 3,000 mm, milling spindle speed (max.): 20,000 rpm, number of spindles: 1, type of cooling: water, machine/vehicle number: 1220099569, operating hours of spindle: 5,720 h, number of slots in tool magazine: 12, number of axes: 5, Elumatec SBZ 122/75, a 5-axis machining center for aluminum profiles. Due to a change in production to a tube laser system, we are selling our fully functional Elumatec SBZ 122/75. Service was performed by Elumatec in March 2026 (see attached maintenance report), and we have not used the machine since then. Interested parties are welcome to view and test the machine at any time. Special equipment (see also the attached invoice): - Length measurement on both sides - 2 additional, automatically positionable material clamps - 1 additional material stop on the right side, allowing for the processing of oversized lengths - Control cabinet cooling Technical data (see also the attached brochure): - X-axis travel: 4176mm - Y-axis travel: 1040mm - Z-axis travel: 540mm - A-axis swivel angle: -120° to +120° freely programmable - C-axis swivel angle: -220° to +220° freely programmable - Max. machining length without end-face machining: 3851mm - Max. machining length with end-face machining: 3525mm - Tool changer with 12 positions - Saw blade diameter: 180mm - 6 material clamps - Tool holder: HSKF63 - Spindle power: 7kW / 20000 rpm, water-cooled Guedpfx Aszz Tbhomtoh - 2-layer machining - Minimum quantity lubrication - Central lubrication This very fast and agile machine with a 5-axis head leaves nothing to be desired. The machine is available immediately. Space requirements can be found in the layout in the appendix. You can also find the transport instructions in the appendix; please contact us if you have any questions. Dismantling, loading and transport should preferably be organized by the buyer due to the subsequent reassembly. Various auxiliary tools can be made available upon request, if available. All information and dimensions have been provided to the best of our knowledge and belief; however, no guarantee can be given for completeness and accuracy! The sale is made as is, without any guarantee, return policy or similar. Subject to prior sale.

Condition: repair required (used), Year of construction: 2024, Overhauled: 2024 PLC control: Siemens S7 Saw blade 60 - 250 mm Motor power 1.5 KW Saw blade feed 0-20 mm/min Cutting speed: 15 - 170 m/min (steel) 630 - 1885 m/min (non-ferrous metal) Max. working area: 70x40 mm (steel) Working area max.: 60x40 mm (non-ferrous metal) Working range round: 5 - 70 mm (steel) Working range round: 5 - 50 mm (non-ferrous metal) Feed length 5 - 500 mm 5-9999 (multiple stroke) Feed speed max. 500 mm/sec Weight (saw)approx.: 610 kg Dimensions LxWxH (saw)approx.:2500mm x 1000mm x 2000mm The machine will be overhauled in our company on customer request. Among other things, the following points will be renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI control panel - Replacement of the pneumatic feed or replacement of the ball screw spindle - Replacement of servo motor and servo inverter - Replacement of the frequency converter for the main saw drive - New electronic components - New pneumatic lines - Maintenance or replacement of all pneumatic cylinders and valve terminals - Optimization of the suction concept - Maintenance of the central and minimum lubrication system - Replacement of general wear parts - Overhaul of the machine body The machine also has: - Minimum lubrication for optimum sawing quality Due to its equipment and design, the machine is suitable for mass cutting of steel in the high-precision tolerance range. Guarantee: Unless otherwise agreed, we guarantee our machines for 6 months on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the guarantee. Optional: - Conversion of the sawing unit to a gearless main drive for sawing non-ferrous metals and plastic materials (speed 1000 - 3000/1min.). - Feed unit 1000mm - Feed unit 2000mm - Screw magazine 4m - Screw magazine 6m - Servo-controlled material feed - Servo-controlled saw feed Gsdpfx Aouiy I Asmtouh - Conversion to prismatic jaws (60°) for mass clamping of round materials - Discharge system - Delivery and installation on your premises - Training of your employees

Condition: used, 5-way combination profile steel shear, PEDDINGHAUS Type 210 AD/13 Machine No. 529A059, Year of manufacture approx. 1970 Punching unit: Punching force 60 tons Punch stroke 25.5 mm Punching capacity Ø 25 mm in 16 mm sheet metal Ø 20 mm in 19 mm sheet metal Overhang 365 mm Round bar shear: Cutting capacity, round 42 mm Square 38 x 38 mm Flat bar shear: Cutting capacity at shear angle 5° 150 x 13 mm or 200 x 10 mm Blade length 245 mm Profile steel shear: Shearing capacity, angle iron at 90° 110 x 10 mm Shearing capacity, angle iron at 45° 90 x 9 mm T-steel 110 x 10 mm Notching device: Rectangular notching up to 12 mm sheet metal Punch dimensions 85 x 50 mm Motor power 3 kW Mains connection 380 Volt, 50 Hz - Center-finding device via hand lever and centering device - Mechanical stroke release via hand lever - Flat bar shear equipped with 2° blade Gedpfsi Duh Isx Amtouh - Mechanical clamp on the profile steel shear, round bar shear and on the flat bar shear Space requirement L x W x H 1500 x 800 x 1900 mm Weight 2000 kg Good condition

Condition: good (used), Year of construction: 1984, Offer 24126 Gsdpjr Ik N Dsfx Amtsuh Motorized bar turning machine + ring and bending machine Technical data: - Bending process mot. with automatic or manual operation - Bending capacity square bars ST 37 up to approx. 30 mm - Bending capacity flat bars ST 37 up to approx. 30 x 8 mm - Bending length between the twisting units adjustable up to approx. 1200 mm - Min. twisting length 10 x material thickness (long side) - Bending time preselection / bending length preselection - Right - left rotation - Tailstock - Arch + ring bending device GRB 66 with various roller sets - Bending capacity - flat steel 60x10 mm high R 700 mm - Flat steel 70x12 mm flat R 500 mm - Round tube 1 ½" x 2 R 800 mm - Square tube 40x40x3 R 1500 mm - Angle 45x6 R 600 mm - Round tube roller sets steel 1 ¼" , plastic 1 ½" - Standard roller set - Space requirement approx. W 1850 x H 1300 x D 700 mm - Drive 400 V / 2.2 kW - Weight approx. 250 kg

Condition: ready for operation (used), System uncoils construction steel from coil and cuts it to desired length Straightening and cutting-to-length machine Gsdpfjw Trpcox Amtsuh 8/10/12/14 mm

Condition: used, Technical details: bending angle max.: 180 ° working height: 350-550 mm operating voltage: 380 V revolutions per minute: 10-20 U/min number of bars max.: 1-4 mm total power requirement: 1,3/2,1 kW Weight approx.: 690 kg dimension machine xH: 1,2 x 0,87 x 1,2 m -Two plate speeds -Mode selector switch for automatic mode, jog mode, continuous operation -Four continuously adjustable counterholder bars Guodjxu Dxqepfx Amtsh without accessories! *

Condition: used, Measuring machine with hand-guided measuring arm, STIEFELMAYER Guedpfx Ajkdnwbemtsh High-precision measuring and marking plate, made of cast steel/grey cast iron, heavily ribbed Machine No. 22890285, Year of manufacture 1985 Length 2500 mm Width 1500 mm Thickness 350 mm Plate thickness (top) 50 mm, solid material with 300 mm ribs Working height approx. 800 mm - Measuring arm can be manually moved, measuring range X=1970 mm, Y=815 mm, Z=840 mm - With 3-axis digital display Grundig MZ 1030 - 5 adjustable feet Space required L x W x H 2500 x 1500 x 2500 mm Weight 3000 kg Very good surface finish

Condition: like new (used), Stainless steel centrifugal sieve machine, rotating sieve. Made entirely of stainless steel. Motor power: 2.2 kW, 695 rpm. Inlet: 250 x 250 mm. Basket diameter: 280 mm x 940 mm. Godpfx Aowygakjmteuh Outlet: 940 mm x 400 mm. Internal components are removable for cleaning. See also our other listings.