Used Thermofisher / Dionex Ultimate 3000 for sale (5,213)

Condition: used, Dionex / ThermoFisher FLM: Temperature range: 5–70 °C (max. 15 °C below ambient temperature) Temperature accuracy: ±0.5 °C Temperature stability: ±0.1 °C Temperature precision: ±0.1 °C Column capacity: Up to 3 columns, max. 30 cm length Heating time: From 20 to 50 °C in less than 25 min (at 23 °C ambient temperature, ±0.5 °C) Cooling time: From 50 to 20 °C in less than 35 min (at 23 °C ambient temperature, ±0.5 °C) Control: All functions software-controlled via USB 1.1 I/O interfaces: 2 digital inputs, 2 programmable relay outputs Column recognition: Electronic identification system for 3 columns Switching valves: 1 or 2 thermostated microvalves with low dispersion (10 ports or 6 ports) Flow splitter: Nano, capillary, or thermostated micro-flow splitter with flow splitter identification system Flow control: Electronically controlled and actively balanced flow splitter, independent of solvent composition and backpressure Nsdezikcxepfx Ahkolf Column flow range: 50 nL/min to 2.5 mL/min using a predefined splitter and active flow control Flow range selection: 50 nL/min to 1,000 nL/min (using a Nano-LC splitter) 0.5 μL/min to 10 μL/min (using a capillary LC splitter) 10 μL/min to 160 μL/min (using a micro-LC splitter) Gradient delay time: Typically 600 nm. Noise: At a wavelength:

Condition: good (used), functionality: fully functional, I am selling a Scheer FM 2-30000 joining and precision cutting machine from my carpentry workshop. The machine is still in good condition but is no longer being used. That is why I am selling it. Njdpfxjztgnls Ahkelf The machine can be inspected and tested on site in Stuttgart.

Year of construction: 2002, condition: ready for operation (used), Ilapak Delta 3000 Stainless Steel Flow Wrapper With gas flush facility In current daily use Ready for removal Sealing bar is 250mm wide Nlodpfx Ahoy Rvfqjksf See video attached Price € 7,500 We can organise shipping / delivery for you.

Condition: excellent (used), Here we offer an ICS system. Flow rate range: 0.000 to 10.000 ml/min (analytical); 0.000 to 3.000 ml/min (capillary) Flow rate accuracy: < 0.1% Flow rate precision: < 0.1% Gradient dosing accuracy and precision: ± 0.5% at 2 ml/min (analytical only) Nlsdpfx Ahszdtlfeksf Pressure range: 0 to 35 MPa (0 to 5,000 psi) (analytical); 0 to 41 MPa (0 to 6,000 psi) (capillary) Dimensions (H x W x D): 14 x 8.25 x 19 in. (36 x 21 x 48 cm) Weight: 24.1 kg (55 lb.) (ICS-5000) Power supply: 9 to 265 V AC, 47 to 63 Hz The system consists of the following components: ICS-5000 plus dual pump 6-port valve MXP9900-000 AFC-3000 automated fraction collector RFC-10 regulator Condition: used Scope of supply: (See pictures as shown) (Subject to change and errors in technical data and specifications!) We will gladly answer any further questions you may have by phone.

Condition: excellent (used), functionality: fully functional, We are offering a high-productivity 3D printer designed for industrial serial production. Trumpf TruPrint 3000 G02, featuring Zirox sensor, single laser, and powder bed monitoring options. Trumpf TruPrint 3000, including filtration system Serial number: S0721Q0022 Laser runtime: 17,508 hours (laser beam on) Most recently used with AlSi10Mg aluminum alloy The 3D printer has already been dismantled by the manufacturer. Dismantling and functional test reports are available, confirming the machine was operational prior to dismantling. All axes have been professionally secured for transport. The machine can be transported on a standard truck. Accessories: 4x dosing containers 1x build cylinder 1x overflow container Various spare parts (e.g., protective glass) Manuals An Armanni CAR.Elev. pallet truck for container exchange is also in stock and available as an optional add-on. Faster production of high-quality 3D components D1. Machine concept The TruPrint 3000 is a versatile medium-format machine featuring external part and powder management for the industrial production of complex metal components via 3D printing. Thanks to its large build volume, it offers great flexibility regarding the size, quantity, and geometry of parts for specific applications. Njdpfx Ahozpvumjkelf Technical data TruPrint 3000 Build volume (cylinder) mm x mm: Ø 300 x H 400 Processable materials: Weldable metals in powder form, such as: stainless steels, tool steels, aluminum, nickel-based, cobalt-chrome, copper, titanium, or precious metal alloys. Build rate cm³/h 5 – 60 Layer thickness μm 20 – 150 Laser source (TRUMPF fiber laser) W 500 Beam diameter μm 100 – 500 O₂ concentration ppm 100 Exposure speed (powder bed) m/s 3 Monitoring – Condition monitoring, performance monitoring. Option: Powder bed monitoring. Preheating (substrate plate) °C 200 Shielding gas – Nitrogen, argon Power supply V / A / Hz 400 – 32 – 50/60 Dimensions (incl. filter) mm 3385 x 1435 x 2225 Weight (incl. filter) kg 4300 Subject to change. The specifications in our quotation and order confirmation are authoritative. Technical data TruPrint 3000 Tab. 3

Condition: ready for operation (used), For sale is a drainage machine that is immediately ready for use. It can reach a depth of up to approximately 2 meters. The undercarriage still has at least 80% of its original capacity. It is pre-equipped for a Moba laser control system, but the system itself is not included. The machine is being sold due to the purchase of a new one. There are no technical defects. Nljdpfx Ahozkvd Djkjf

Condition: excellent (used), For sale is a professional Dr. TRESKY AG T-3000-FC3 station, manufactured by a renowned Swiss company. This is a high-quality laboratory device designed for the precise assembly and positioning of semiconductor structures (Die Bonding / Flip-Chip Assembly). It is used in research laboratories, as well as in the production of electronics, photonics, optoelectronics, and microelectronics. The T-3000-FC3 model is one of the most versatile platforms from Tresky and enables the execution of both basic and advanced assembly processes. Technical specifications: Manufacturer: Dr. TRESKY AG Model: T-3000-FC3 Country of manufacture: Switzerland Type: manual Die Bonder / Component Placer FC3 Bond Force Control controller Olympus SZ51 stereoscopic microscope Precision XY table Bond force control Vacuum and pneumatic system LED work lighting Documentation included Numerous working tips, holders, and accessories as shown in the photos Applications The device is used for: assembly of semiconductor devices (Die Bonding), Flip-Chip technology, assembly of MEMS components, production of photonics and optoelectronics, assembly of VCSEL lasers, assembly of sensors and hybrid circuits, research and development work and prototyping. Condition The device is sold with extensive equipment as shown in the photos: Olympus microscope, FC3 controller, documentation, drawers with accessories, set of tools and working tips, pneumatic components and accessories. The visual condition is very good. It is sold exactly in the configuration shown in the photos. Nljdpfxozi Upcj Ahksf

Condition: excellent (used), For sale: Professional industrial extraction unit by TEKA, model STRONGMASTER BIA, designed for welding fume extraction and air pollution control. ‼️ VERY LOW HOURS – ONLY 1,550 OPERATING HOURS (this is rare for this type of equipment) ⚙️ Technical specifications: Manufacturer: TEKA (Germany) Model: STRONGMASTER BIA Capacity: 3,000 m³/h Max. negative pressure: 2,500 Pa Nsdpfjyz Diljx Ahkelf Motor power: 1.1 kW Power supply: 400V (3PH + N + PE) Frequency: 50 Hz Rated current: 2.5 A Protection class: IP54 Control voltage: 24V Weight: approx. 130 kg 🔧 Equipment: Flexible extraction arm Industrial filter Control panel Operating hours counter Mobile chassis with wheels 🔍 Condition: Used equipment, in good technical condition. Normal signs of use visible. ✅ Low hours – only 1,550h ➡️ Equipment is only lightly used ➡️ Significant potential for further operation

Condition: excellent (used), functionality: fully functional, We offer a highly productive 3D printer for industrial series production. Trumpf TruPrint 3000 G02 with the options Zirox Sensor, Single Laser, and Powder Bed Monitoring. Trumpf TruPrint 3000 including filter system. Serial number: S0721Q0022 Laser performance: Laser beam on 17,508 hours. The system was finally used with aluminum AlSi10MG. The 3D printer has already been disassembled by the manufacturer. Disassembly and functional reports are available, proving that the machine was in operation before disassembly. All axes are properly secured. The machine can be transported on a standard truck. Accessories: Njdpfx Aovu Ticehkjlf 4 dosing containers 1 construction cylinder 1 overflow container Various spare parts such as protective glass, etc. Manuals The Armanni CAR.Elev pallet truck. A container changer is also in stock and can be offered as an option. Fast to high-quality 3D components D1. Machine concept The TruPrint 3000 is a universal medium-format machine with external parts and powder management for the industrial production of complex metal components using 3D printing. Its large build volume offers high flexibility in terms of the size, quantity, and geometry of the respective application. Technical specifications TruPrint 3000 Build volume (cylinder) mm x mm Ø 300 x H 400 Processable materials5 - Weldable metals in powder form, such as: stainless steels, tool steels, aluminum, nickel-based, cobalt-chromium, copper, titanium, or precious metal alloys. Build rate 6 cm3/h 5 - 60 Layer thickness 7 μm 20 - 150 Laser source (TRUMPF fiber laser) W 500 Beam diameter μm 100 - 500 O2 concentration ppm 100 Exposure speed (powder bed) m/s 3 Monitoring - Condition monitoring, performance monitoring. Option: Powder bed monitoring. Preheating (substrate plate) °C 200 Shielding gas - Nitrogen, argon Power supply V / A / Hz 400 - 32 - 50/60 Dimensions (incl. filter) mm 3385 x 1435 x 2225 Weight (incl. filter) kg 4300 Subject to change. The information in our offer and order confirmation is authoritative. Technical data TruPrint 3000 Table 3

Condition: excellent (used), WEBO 4-Headed Table Multi-Spindle Drill 4×0.75 kW 200–3000 rpm Nedpfx Ahszkmfxekslf

Condition: excellent (used), Year of construction: 2016, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: 60022, turning length: 250 mm, turning diameter: 42 mm, spindle speed (min.): 6,000 rpm, travel distance X-axis: 150 mm, travel distance Y-axis: 385 mm, travel distance Z-axis: 250 mm, spindle motor power: 7,500 W, total height: 1,900 mm, total length: 3,500 mm, total width: 1,900 mm, overall weight: 4,200 kg, i-42 Ultimate lathe Nlodpfx Ahozwmknsksf • Number of controlled axes: 10 • Number of driven tools: 12 • Max. diameter: 42 mm • Max. length: 250 mm Includes a feeder – max. length 1 m.

Condition: new, Year of construction: 2024, load capacity: 3,000 kg, Container rotating device, welding table, welding turntable, roller stand 3000 kg load capacity with foot-operated remote control Speed continuously adjustable, 80 to 1600 mm/min. Diameter 40mm to 1400mm Roller diameter 200mm L: 800 x W: 370 x H: 450 Model or color variations possible. Nedpfegu Edyjx Ahkslf

Year of construction: 2014, operating hours: 12,583 h, condition: used, functionality: fully functional, machine/vehicle number: VKARC1310E0000007, The Stonefex 3000 stone separator reliably and efficiently removes stones and inert objects from biomass. The input product is typically a biomass fraction, such as that obtained from a screen, for example, the woody part of green waste, an intermediate fraction after compost screening, or wood chips. Nledpfx Aozt I Ruehksf

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, turning length: 3,000 mm, turning diameter over bed slide: 480 mm, controller model: Siemens 840D, TECHNICAL DETAILS Swinging diameter over bed: 520 mm Swinging diameter over carriage: 480 mm Turning length: 3,000 mm C-axis: yes C-axis speed range: 0–20 rpm Number of tools: 12 Driven tools: 6 Spindle bore: 103 mm Main spindle head size: 8 MACHINE DETAILS Nlsdpfszwmztox Ahksf Control system: Siemens 840D Main drive Main drive: 1-stage AC main drive Drive power: 53 kW Duty cycle: 50 % Speed range: 30–3,000 rpm EQUIPMENT Forkardt 3 NHF 315-82 A8 power chuck with centrifugal force compensation and hard, ground-in top jaws Outer diameter of power chuck: 315 mm Bore diameter of power chuck: 82 mm Maximum bar diameter: 63 mm Including draw tube and mounting for power chuck

Condition: ready for operation (used), Year of construction: 2000, operating hours: 22,000 h, functionality: fully functional, machine/vehicle number: 28217, travel distance X-axis: 2,700 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 6,000 rpm, overall weight: 18,500 kg, The combination of the Zayer 20 KF 3000 machine, the Heidenhain TNC 426 control system, and a swivel universal head (Huron type) transforms this milling machine into a versatile and powerful production hub. The swivel head completely eliminates the biggest drawback of large machines – the need to constantly reposition and re-clamp heavy workpieces for machining at different angles. Here’s how precisely this head works with the Heidenhain system and what possibilities it offers. Kinematics and capabilities of the swivel head. The head in ZAYER machines consists of two inclined dividing planes that rotate relative to each other. This design allows for: Transition from vertical to horizontal: In a few moments, you can change the machine from a vertical machining center to a horizontal milling machine. This makes it possible, for example, to simultaneously machine the top of a workpiece and, a moment later, mill its sides. Milling at any angle: The head allows you to position the spindle in space at unusual angles, which is crucial for machining inclined surfaces, chamfering large plates, or creating converging pockets. Enormous rigidity: Although the head is movable, its design locks with tremendous force (mechanically or hydraulically). The machine does not lose any of its ability to perform heavy rough machining (so-called “hogging” with a large chip). Cycle 19 and PLANE in Heidenhain TNC 426 – The magic of software. The biggest challenge with a swivel head is the mathematics – when you tilt the tool, the zero points in the X, Y, and Z axes change. Heidenhain TNC 426 solves this automatically using dedicated geometric functions: Cycle 19 (Machining Plane): You inform the control system of the angle at which you have physically rotated the head. The computer immediately recalculates the entire coordinate system. The tool moves in the axis at an angle, and you program as if you were working on a flat surface. Coordinate transformation: You don't have to manually calculate the tool offset after rotating the head. The controller knows the exact dimensions of the machine's kinematics and automatically corrects the position of the X, Y, and Z axes. Angular drilling: After calling Cycle 19, the standard drilling cycle (e.g., deep drilling) automatically performs the feed movement in the inclined axis – the operator writes the program in the Z axis, and the machine physically moves with a combination of the X, Y, and Z axes. Production benefits in the workshop. Machining 5 sides of a workpiece from a single setup: You place a 5-ton steel block on the table. You clamp it once. By rotating the head, you machine the top and all four sides without moving the workpiece with a crane. This guarantees perfect maintenance of geometric tolerances (perpendicularity and parallelism of the surfaces). Time savings and safety: Repositioning a large workpiece on the table often takes hours and carries the risk of accidents or damage to the table. With this head, you only reposition the tool – manually using dividing plates or in an automatic version from the program. Nlodpjzrd Tvefx Ahkof

Condition: used, Year of construction: 2019, functionality: unexamined, machine/vehicle number: S40-0051, type of input current: three-phase, input voltage: 400 V, working width: 3,210 mm, cutting width (max.): 3,210 mm, laser power: 400 W, type of cooling: water, laser type: CO₂ laser, laser source model: Firestar f400, Equipment: fume extraction, The system consists of: Trotec SP4000 C / New Textile – 400 W CO₂ laser cutting system Sigma C13 – Cooling unit for the laser system Aigner VENT Set SP 3000 – Extraction and ventilation unit ASCO BV – Unwinding and material feed system for roll goods JQS Querimat QSV – Cross-cutting unit with a cutting width of 2,500 mm Firestar – CO₂ laser source The system is currently located in Worms and was used in ongoing production until the plant was shut down. Since the machine is currently not connected to the power grid, a current functional test cannot be performed at this time. An on-site inspection is possible by arrangement. The system is offered in its current condition and with the components shown in the pictures. Nodpfx Aszuyg Rjhkelf

Condition: excellent (used), Year of construction: 2014, operating hours: 367 h, functionality: fully functional, turning length: 2,845 mm, turning diameter: 1,150 mm, total height: 1,890 mm, total length: 6,740 mm, total width: 2,205 mm, workpiece weight (max.): 5,000 kg, overall weight: 9,170 kg, Equipment: documentation/manual, Hankook Protec 9NC 3000 Flat Bed CNC Lathe — 2014 Year: 2014 Machine: Hankook Protec 9NC 3000 Type: Flat Bed CNC Lathe Running Hours: 367 hours Available for sale is a 2014 Hankook Protec 9NC 3000 Flat Bed CNC Lathe, showing just 367 hours. The machine is supplied with all three steady rests, making this a very well-equipped machine and an excellent opportunity for anyone looking for a heavy-duty CNC turning centre with very low hours. Key Features Hankook Protec 9NC 3000 2014 model Only 367 hours ! Flat bed CNC lathe 3 x steady rests included 3 Jaw and 4 Jaw Chucks Heavy-duty construction Nljdpfx Ahezvgayeksf Suitable for a wide range of turning applications Low-hour machine Safety platform included Turning diameter over bed: Ø1150 mm Turning diameter over carriage: Ø830 mm Maximum turning length: 2845 mm Spindle bore: Ø105 mm Maximum turning weight: 5000 kg A very clean, low-hour example of a Hankook Protec 9NC 3000, complete with all three steady rests. Contact us for further information, photographs, specifications or to arrange an inspection.

Year of construction: 2007, condition: used, functionality: fully functional, DANTHERM NFZ 3000 (Year 2007) Reliable and high-capacity dust extraction (air filtration) unit for sale, suitable for woodworking, furniture manufacturing, and other industrial applications. Technical Specifications: Filter area: approx. 150 m² Model: NFZ 3000 Year of manufacture: 2007 Collection bags: 6 pcs. Fans: 3 pcs. (3 sections) Airflow capacity: approx. 9,000 m³/h Inlet connection: Ø 630 mm Dimensions: Njdpfx Aszlgm Eshkelf Length: 3,600 mm Width: 2,400 mm (+ approx. 1,000 mm fan overhang) Height: 5,400 mm The unit is designed for efficient collection of dust and wood shavings and is suitable for a wide range of industrial production facilities. It features a robust construction and is easy to maintain. Condition: Used (fully operational) Price: Negotiable

Condition: used, This listing is for a Dionex HPLC System Njdpfxjxzhm Sj Ahkelf Combination includes Dionex AS3500 Dionex GP50 Gradient Pump Dionex ED50 Electrochemical Detector Dionex AD250 Absorbance Detector Dionex LC25 Cromatograph Oven Bottle trays This system has been removed from the lab while in good working condition, it was well serviced and is still in very good condition.

Condition: used, Year of construction: 2006, with automatic lifting table feeding system with 4 precision spindles, ensuring the stack is always held evenly at the correct level. Equipped with 4 powered roller groups. Lifting table dimensions: 6000 x 2200 mm. Feeding side: left (from the operator's perspective). Max. stack height: 450 mm. Lifting table height (bottom): to be defined. Speed for lifting and lowering: 0.7 m/min. Lifting table drive: 3 kW. Powered roller group: 4. STANDARD CONFIGURATION. Usable cutting length: 6000 mm. Lifting table feeding: Yes. Working height: 950 mm. Saw blade overhang: 100 mm. Clamping device opening: 117 mm. Machine control: G Drive RT. Number of clamping devices movable in X: 1. Number of clamping devices movable in X and Y: 1. Number of fixed clamping devices: 1. Min. material thickness (with side alignment): 10 mm. Min. material thickness (with lifting table feeding): 10 mm. Min. panel dimension (with lifting table feeding): 2400x1200 mm. Max. panel dimension (with lifting table feeding): 5500x2070 mm. Max. panel dimension (without lifting table feeding): 5800x2010 mm. Safety device according to CE: included. Supply voltage: 400 V / 50 Hz. MACHINE CONFIGURATION. Machine bed: The machine bed structure made of steel is welded using arc welding and then milled and finished on CNC machines. The rigid structure of the machine bed guarantees both high cutting quality with high cutting speed, as well as the enormous durability of the entire machine. Saw blade overhang: 100 mm. Power of main saw motor: 7.5 kW. Power of scoring saw motor: 2.2 kW. Diameter of main saw blade: 400 mm. Diameter of scoring saw blade: 215 mm. Feed rate of saw carriage: Forward: 1-170 m/min. Return: 170 m/min. Motorization of saw carriage feed: Servo drive. Diameter of dust extraction port (bottom, 1x): 200 mm. Diameter of dust extraction port (top, 2x): 115 mm. Thanks to the rigid machine bed construction, the masses are distributed in the best possible way, which prevents twisting and thus guarantees an absolutely vertical run of the saw blade. Machine table made of steel with individual, removable support elements made of high-quality, durable material. The saw carriage runs on two round guides, which are mounted horizontally on one level. Large prism rollers (diameter 86 mm), with spring-loaded counter rollers, ensure smooth linear feed, as well as very low contact pressure and enables virtually wear-free operation of the saw carriage. The weight and forces acting on the saw carriage are evenly distributed on the two guides (50/50) and on each individual prism roller. The saw carriage runs absolutely without lubricant on the guides. The two guides are located away from the cutting line, outside the direct dust area. The diameter of the guide rods is 40 mm, making them the largest and most stable guides used in this sector. Pneumatic quick clamping system; for quick and convenient tool changes. This system is extremely reliable in operation, as it is mechanically clamped via a flange with a bayonet lock and spring force and unlocked via a pneumatic quick coupling. The flange must be rotated by approx. 10° in order to remove it. Due to excellent accessibility and the fact that the operator does not need any other tools, the tool change is very easy and can be carried out in seconds. The scoring saw adjustment is made from the outside. Njdpfjzn N Ikox Ahkelf

Condition: used, Year of construction: 2016, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,500 mm, RepairFIT by Dornhöfer The difference. Includes installation & commissioning! KEY TECHNICAL DATA Machine year of manufacture: 2016 Capacities / Travel: Longitudinal (X): mm 3,000 Vertical (Y): mm 2,000 Lateral (Z): mm 1,500 Clamping surface, NC rotary table: Swivel table: mm 1600 x 1400 Transport load: kg 15,000 Positioning accuracy: arc/sec ±2.5 Paint finish: graphite gray RAL 7024 / agate gray RAL 7038 Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Main drive: Drive power (from 376 rpm): kW 40 Spindle speed range: Spindle speed: min-1 0 - 3,000 Torque: Nm 1,360 Speed control: 3-stage (oil-cooled) with automatic switching Connection power: kVA approx. 53 Feeds: Working feed max.: X, Y and Z axis mm/min 15,000 Max. Rapid traverse speed: X, Y and Z axis mm/min 25,000 Space requirement Length approx. mm 8,500 Height approx. (without tool changer) mm 4,200 Nlsdpfx Aezux Awjhkof Width approx. mm 5,600 Weight: kg approx. 29,200 HEIDENHAIN iTNC 530 HSCI Automatic MTE milling head Diagonal Automatic tool changer Chip conveyor Coolant system with 50 bar & (IKZ) Full enclosure for working area (closed at the top) Extraction system for the aforementioned full enclosure Special operating mode RepairFIT is our proven offer for a profitable entry into our product lines. The machines available in this line are procured after a strict selection process and undergo a thorough inspection (deep-dive check). After intensive cleaning, the identified obvious defects and faults were professionally repaired by our skilled service team.

Condition: excellent (used), Year of construction: 2013, operating hours: 55,200 h, functionality: fully functional, machine/vehicle number: A0035A0294, Machine type: TruPunch 3000-1300 (S11) TruPunch 3000-1300 (S11), medium format 1250/2500 We are the first and only owner of the machine. Machine with complete history and service documentation. Machine is in fully working order and in continuous operation. Technical data: Width 6500 mm Depth 6203 mm Height 2252 mm Max. punching sequence (E = 1 mm) 1000 1/min Max. punching sequence – marking 2500 1/min Punching mode, X-axis 2500 mm Punching mode, Y-axis 1250 mm Max. sheet thickness 6.4 mm Max. workpiece weight 160 kg Max. punching force 180 kN Multitool tool change time 0.3 sec Number of tools/sheet clamps | 18 pcs / 2 pcs Max. part size, part flap when punching 500 mm x 500 mm Max. part size, rigid slide for punching (with sliding table) 80 mm x 50 mm Average power consumption with active automatic shutdown 0.3 kW Average power consumption during production 5.6 kW Additional, non-standard machine equipment: 1) Thread forming function with thread counter and thread forming tool damage control: chip-free thread forming is possible in both structural steel and stainless steel and aluminum. The threading tool is mounted like all other tools in the head. Thread size to be machined ranges from M 2.5 to M10. A thread sensor enables control of the threading tool damage. User-friendly operation, including lubricant level control. 2) Marking/surface embossing function: fast marking using appropriate tools. High-quality knurling can be performed at high speed. 3) Lowerable die: the lowerable die enables scratch-free processing because it moves downward when positioning the sheet metal. Nljdpfszd U D Njx Ahkjf 4) Additional clamping device: recommended for processing very thin sheets and when using roller tool machining technology. An additional 2 clamping devices can be installed. In combination with the SheetMaster Compact, a third clamping device is recommended. 5) 3 x Option - vertically movable clamping device: the clamping devices move vertically (maximum stroke 12 mm); enables direct processing of the sheet metal at the clamping devices. This option reduces scratches from high forming dies. 6) Sensor in the slide for small parts: control of the slide for small parts (included in the "Nibbling-free machining" option). 7) Second locating pin: the pin is located on the outside on the right side. 8) RTC tool cassettes: 17 tool cassettes with die plates, enabling quick machine retooling. 9) Brush table with unloading and loading assistance: a brush table is recommended for processing particularly delicate materials. Vertically moving balls embedded in the table facilitate the loading and unloading process. We invite you to contact us.

Condition: good (used), Year of construction: 1990, pressing force: 3,000 t, Bending length: 14,000 mm Column width: 10,500 mm Control: CYBELECCNC 7000 with graphic Nodpfx Aszwk Ecohkslf Table width: 1,000 mm Distance between table and press beam: 1,800 mm Controlled axes: Y1; Y2; X1; X2 Control system was renewed in 2012 Total power requirement: 75 kW Machine weight approx. min.: 465 t Space requirement approx.: 14,600 x 4,200 x 7,200 mm Additional information - Distance between table and press beam: 1,800 mm

Year of construction: 2017, condition: like new (used), machine/vehicle number: 81100543, The machine is ready for operation and has only been in use for 3 years since its purchase. The device was installed in a production line for soups in 220 ml to 360 ml packages. Production series: SC-3000-XXX Scanning width: 320 mm Optical resolution: 1 pixel = 0.16 mm Nledpfxozrh D Ss Ahkjf Rated voltage: L1/N/PE 230V AC Rated frequency: 50 Hz (+/-2%) 1.6 kVA Connected load: 16 A Protection class: IP65 Lamp type: MXR-160HP/20 Operating temperature range: 5°C - 40°C Machine weight: 420 kg Length: 1750 mm Depth: 720 mm Height: 2290 mm EU Declaration of Conformity Option to start the machine on-site.

Condition: used, Marel M Series 3000 Nlsdpfx Aoxtfvhehkef