Used The Side Brush For The Sweeper for sale (26,908)

Condition: as good as new (ex-display), Year of construction: 2016, For sale: machine for packaging paneling. Pjdpfx Afozkwi Uj Sogt

Condition: excellent (used), I am offering for sale a professional RF signal generator, the Agilent 83651B Synthesized Sweeper, designed for laboratory, research and development, and service applications. This device is used for testing microwave circuits, telecommunications equipment, and high-frequency measurements. Model 83651B offers a wide frequency range from 10 MHz to 50 GHz, making it ideal for laboratories involved in electronics, microwave technology, and telecommunications. The device is equipped with numerous measurement and control connectors, a GPIB interface, 10 MHz reference inputs and outputs, and the ability to interface with other measuring instruments. The equipment comes from a dismantled laboratory. It has not been tested by us and is sold as a used device. The visual condition is shown in the attached photos. Technical specifications: Manufacturer: Agilent Technologies Model: 83651B Type: Synthesized Sweeper / RF Signal Generator Frequency range: 10 MHz – 50 GHz Power supply: 230 V AC, 48–66 Hz Communication interface: GPIB (IEEE-488) 10 MHz reference input and output Control inputs and outputs (Trigger, Sweep, FM, AM, Pulse) Pjdezl H Ddopfx Af Sjgt Applications: laboratories, research and development, telecommunications, microwave technology, RF measurements Condition Used device. Not tested. Good visual condition, with normal signs of use visible in the photos. Sold in the exact condition as shown in the photographs.

Condition: new, Year of construction: 2026, The side brush for the ZP7500 CORMAK sweeper is a practical additional accessory that significantly improves the machine’s performance. It is responsible for thoroughly sweeping hard-to-reach areas—along walls, shelves, curbs, and in corners where the main brush cannot reach. As a result, surfaces are cleaner after just one pass, without the need for touch-ups. Using a side brush also increases the sweeper’s working width, which directly translates into higher productivity. In practice, this means faster cleaning of large areas such as warehouses, yards, or parking lots. Psdpfx Aeyvp Ngef Sogt The solid construction and wear-resistant bristles ensure a long service life, even under intensive use. The brush is designed for demanding conditions—it effectively collects both fine dust and larger debris such as sand, leaves, or gravel. The brush construction is adapted for operation in challenging industrial environments—resistant to mechanical damage and heavy use. Installation and removal are quick and intuitive, making replacement or servicing easy without downtime. Key benefits: precise sweeping along edges and in corners increased working width and higher efficiency effective collection of both fine and larger debris reduced manual labor and fewer passes required durable, wear-resistant bristles quick installation and convenient operation

Condition: ready for operation (used), Year of construction: 2004, I sell the 3-side brushing machine Quickwood CD2-1300, Year 2004. Pedpfx Asvylmqjf Segt 2 pcs. Surface brushes from top 2 pcs. Side brushes Working width 1300mm Vacuum underpressure table with ventilator. Adjustable rotation and feeding speed. Suitable for rustical brushing and patina surface. Profiles possible. Made in Italy With full Documentation. Available immediately.

Condition: excellent (used), Year of construction: 2004, grinding height: 100 mm, working width: 250 mm, grinding width: 250 mm, Double-sided brush sanding machine / profile sanding machine Manufacturer: Quickwood Model: QL 3 Year of manufacture: 2004 Texturing and sanding machine, double-sided operation, equipped with a total of 6 brush units. Machine suitable for integration into production lines due to constant table height. Working width: 250 mm Passage width: 300 mm Passage height: approx. 100 mm Minimum workpiece length: approx. 500 mm Equipped with: 2x brush units from below, each 1.5 kW, frequency controlled, suitable for texturing and sanding 2x brush units from below, each 1.5 kW, frequency controlled, suitable for texturing and sanding 2x brush units from above, each 0.75 kW, frequency controlled, suitable for fine sanding Pneumatically controlled pressure rollers for workpiece guidance and stabilization Feed rate steplessly adjustable, approx. 5 - 25 m/min Extraction connections: 150 mm Pgodpfxexvz Ulo Af Set Dimensions approx. 2045 x 1350 x 1700 mm (LxWxH) Weight: approx. 1000 kg

Condition: excellent (used), Year of construction: 2005, I sell the 4-Side brushing machine suitable for windows, doors, tables, etc. Futura MS120 Y1 X2, year 2005 Working width 1200mm Working height 200mm Total weight 2500kg Configuration: Side brushing heads left - right H.170mm 2 bottom heads left - right Nylon W.140mm Pedpfsd Raqkox Af Ssgt Oscillating top head W.260mm Big brushing heads top - bottom W.1150mm Machine equipped with heads on the pictures. Available immediately.

Year of construction: 2019, condition: like new (used), Thermoformer Designed for pharmaceutical environments, it can thermoform trays for vials, ampoules, syringes, and medical devices in general, using thermoformable films such as PVC, PET, R-PET, Polystyrene (PS), PP, PLA, etc. Possibility to cold-form Aluminium based materials. Main Features: Balcony structure for easy access and cleaning High-speed positive automatic product feeding systems Available with or without a sealing station Arrangeble for in-line connection Pgsdpfeybcwtjx Af Sjt Quick, repeatable, and tool-free format change Thanks to the servo-assisted main transmission, the machine speed is adjustable from the main HMI within dedicated recipes Automated thermoformer machine. Forming material reel unwinding - preheating - forming - filling with laminated strips (robot) - applying and sealing tyvek lid - cooling - serialised printing - indexing - punching - feed sealed strips out to box packaging machine.

Condition: used, For sale are the Multivac forming and closing tools shown in the pictures. There are 2 sets. Each for a foil width of 420mm. Multivac 19.200.1240.95 6x11cmx18cm tray size. Price: 2000 eur Pjdpfswth Uisx Af Segt the other is 9x11.5cmx11cm item number 105793236, price 2000 eur.

Condition: new, Year of construction: 2017, functionality: fully functional, operating hours: 25 h, input voltage: 380 V, type of input current: three-phase, total height: 1,500 mm, total length: 5,200 mm, total width: 2,350 mm, overall weight: 2,500 kg, saw band length: 520 mm, saw band width: 580 mm, New machine. Pgedpfjunia Hjx Af Sot

Condition: reconditioned (used), Year of construction: 2011, operating hours: 1,554 h, functionality: fully functional, overall weight: 1,500 kg, HAKO JONAS 1200 E Sweeper New Hawker Perfect Plus 24V 420 Ah (7PZS420) traction battery New Neos 24V 50A charger New air filter Year of manufacture: 2011 Machine operating hours: 1,554 Built-in warning light and full front/rear road lighting A new, innovative cylindrical brush combined with a new anti-static side brush (mixed-bristle) ensures excellent sweeping results Psdpjz D D Nxefx Af Sjgt A high-performance dust extraction turbine and new sealing skirts around the main brush prevent fine dust from rising during sweeping The machine features a large-debris flap for collecting larger waste items The unit has undergone a comprehensive, meticulous overhaul; operating fluids and components—such as bearings, drive belts, and sealing skirts—have been replaced with new ones. Each unit we offer features actual photos; you are buying the exact machine shown. TECHNICAL DATA: Model: Jonas 1200 E Sweeping width (mm): 800 Sweeping width with one side brush (mm): 1150 Coverage with one side brush (m²/h): 9300 Sweeping speed (km/h): 8 Hopper capacity (l): 130 Filter area (m²): 5 Dimensions L x W x H (mm): 1998 x 1142 x 1520 Weight ready for operation (kg): ~1500 INCLUDED: NEW HAWKER PERFECT PLUS traction battery 24V 420 Ah (7PZS420) NEW NEOS charger 24V 50A NEW air filter NEW anti-static cylindrical brush – mixed bristles NEW anti-static side brush – mixed bristles NEW cylindrical brush skirt/seals Built-in warning light Full front/rear road lighting Waste hopper (130L) KEY FEATURES: Ergonomically designed cockpit and centrally positioned operator seat ensure excellent visibility of the cleaning area. The Jonas 1200 E sweeper is the perfect machine for efficient, cost-effective sweeping of multi-level parking garages, warehouses, production facilities, and outdoor areas. Battery power ensures high flexibility, allowing for operation in enclosed spaces and buildings. warehouse halls A large working width (1,150 mm) ensures high area coverage. Highly legible and intuitive control panel.

Condition: new, Spare parts category: safety mat for CNC Allen Bradley Lignum 1600x 800 Brand: safety mat for CNC Allen Bradley Lignum 1600x 800 Pedpfx Ajz Eggvjf Segt Model: safety mat for CNC Allen Bradley Lignum 1600x 800 Description: safety mat for CNC Allen Bradley Lignum 1600x 800 Allen Bradley Lignum CNC safety mat new, thickness: [value missing] series: 440-F, range: MatGuard, length: 1.5m, width: 1m, thickness: 16mm, Plastisol vinyl, IP67 Allen Bradley protective mat, length 1.5 m, width 1 m - 440F-M2030BYNN The Allen Bradley series MatGuard safety mat from Rockwell Automation is a safety device that detects human presence in hazardous areas. It can be connected to the control circuits of industrial machinery in hazardous environments, creating a protected area of 1.5 m (length) x 1 m (width). When the mat's detection surface senses a person, it sends a signal that shuts down the machine, preventing injury and increasing workplace safety. The durable vinyl material is resistant to bleach, acids, and other industrial chemicals, making it a suitable choice for use in demanding industrial settings. This mat is commonly used to restrict access to hazardous areas in factories. Features and advantages: • Hardened sheet steel construction increases durability. • 4-wire open and short-circuit detection system for enhanced electrical safety. • Can withstand a high static pressure of 4,500 psi (pounds per square inch) for use in heavy-duty applications. Standards and certifications: • CSA (Canadian Standards Association) • ISO13849-1 (International Organization for Standardization) • IEC/EN60204-1 (International Electrotechnical Commission) • TÜV (Technischer Überwachungsverein) Is this mat safe to use in damp or wet areas? IP67 rating CE certified TUV certified CSA certified cULus approved EN1760-1 EN954-1 ISO 13849-1 IEC/EN60204-1 ANSI RIA R15.06 ANSI/B11.19 AS4024.5 The mat is rated IP67 (ingress protection), meaning it is protected against dust and can be water-resistant for up to 30 minutes. This makes it safe for use in humid environments. Technical specifications: Attribute Parameter MatGuard Range 440-F series Protected area 1500 x 1000mm Length 1.5m Width 1m Thickness 16mm Mat material Plastisol vinyl IP rating IP67 Year: 2023

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, total height: 1,900 mm, total width: 2,400 mm, total length: 6,000 mm, type of input current: AC, overall weight: 500 kg, input voltage: 220 V, machine base height: 900 mm, operating pressure: 9 bar, year of last overhaul: 2027, control voltage: 220 V, input current: 16 A, input frequency: 50 Hz, inner diameter: 610 mm, space requirement length: 6,000 mm, space requirement height: 2,000 mm, space requirement width: 3,000 mm, We offer this ready for use The Raw Juice Company TOP-21 Bottle Filling Machine 100ml - 3000ml, year of construction 2022. Manufacturer: The Raw Juice Company Pgsdpfxsz D Uuxe Af Sot Model: TOP-21 Year of construction: 2022 year Condition: ready for use / Currently in use Category ID: 310 Type ID: 1066 Machine type: Bottle Filling Machine 60ml - 3000ml This versatile filling machine is currently being used for filling bottle sizes from 60ml - 2000ml. It is a fully automatic line, run by 1 person. Put the bottles on the line, it will fill them (4 bottles at a time) with a 4 headed diving nozzle (to avoid foaming), then moving the bottles along to a cap placer and finally a to a cap tightener. The cap tightener is set up for a 38mm cap (this can be changed). This line has been regularly maintained by our in house service team and is in perfect working order. Capable of filling from 500 - 2000 bottles P/Hour If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Used Thetford International T3 waste compactor. Pgjdohvi Ahjpfx Af Sot

Condition: excellent (used), LINE of Double-Side Sizing-Milling & Edge Banding (also "SOFTFORMING") with automatic handling. Max. panel thickness 100 mm. Composed by the following machines: W05025A) Automatic LOADER (portal / gantry) "MAHROS" Mod. Brush W05025B) Double-side Sizing and Edge Bander "HOMAG" Mod. KFL 620/23/QE/30 (softforming) SIZING PART (for each side): Pre-Milling unit (2 x Kw 6,6) Free place LEFT SIDE only: 2 x Milling grooving rotating unit (2 x KW 6,6) EDGE BANDING PART (for each side): Glueing Unit (EVA glue with pre-melter) Edge coils supporting unit (No. of reels) 1 pressure zone for both STRAIGHT and SOFTFORMING Snipping (end-cutting) Unit WK14 (2 x 0,8 KW) Fine Trimming Unit (2 x 0,55 KW) Corner-rounding unit FF12 (4 motors) WD70 Pgodpfx Ajtt Dqpof Set Profile edge scraping unit PN20 Finish processing unit (Glue scraper + Buffing unit) FA 11 W05025C) Automatic UNLOADER-STACKER (portal / gantry) "MAHROS" Mod. Brush

Condition: new, Year of construction: 2026, The main brush for the ZP7500 sweeper is a key working component responsible for efficiently collecting debris from the cleaned surface. It ensures proper transport of dirt into the hopper, delivering high sweeping performance both indoors and outdoors. Thanks to its cylindrical design, the brush precisely picks up debris from beneath the machine and directs it into the sweeper. This operating system allows for effective removal of both fine particles such as dust and powder, as well as larger debris like sand, leaves, or small gravel. The result is a clean surface after just one pass. The bristles are selected with optimal stiffness to provide the best balance between cleaning efficiency and durability. The brush performs well on various types of surfaces—from smooth warehouse floors to more demanding industrial grounds. High wear resistance ensures that the main brush retains its properties over a long period, even under intensive use. This translates into lower operating costs and less frequent replacement of consumable parts. An additional advantage is the simple and quick installation, allowing for efficient replacement without downtime. This is particularly important in environments where equipment continuity is critical. Key benefits: effective collection of debris into the hopper high efficiency in a single pass Pgsdpfxeyvp R De Af Set suitable for various surface types durable, wear-resistant bristles lower operating costs quick and convenient replacement The main brush is a fundamental consumable component of the ZP7500 sweeper, directly impacting work quality and efficiency. Regular replacement ensures maximum cleaning performance and reliable operation in daily use.

Condition: new, functionality: fully functional, power: 55 kW (74.78 HP), Year of construction: 2026, Ball Mill for Powder and Mining Plant: Structure, Function, and Technical Details A ball mill is a key grinding machine widely used in mining, metallurgy, cement, chemical, and powder-making industries. It is designed to grind various ores and other materials into fine powder through impact and attrition between steel balls and the material inside a rotating cylindrical shell. In mining plants, ball mills are essential for ore beneficiation, preparing materials for flotation, magnetic separation, or leaching processes. In powder production, they ensure uniform particle size and high surface area for further processing. Working Principle The ball mill operates on a simple yet effective principle: as the cylindrical shell rotates around its horizontal axis, the grinding media (steel or ceramic balls) are lifted along the inner wall by centrifugal force and friction. When they reach a certain height, they fall freely, striking and grinding the material below. This repeated motion causes both impact and abrasion, reducing the material to the desired fineness. The grinding process can be performed in dry or wet conditions depending on the application. Structural Composition A standard ball mill consists of several main components: Feeding part: Equipped with a feeder or screw conveyor to ensure uniform material input. Discharging part: Can be grate type or overflow type, depending on the discharge method. Rotating part: The cylindrical shell made of steel plates, lined with wear-resistant liners. Transmission system: Includes motor, reducer, small transmission gear, and electrical control. Grinding media: Steel balls or ceramic balls of different diameters for efficient grinding. The internal liner design and ball size distribution are optimized to achieve maximum grinding efficiency and minimal energy consumption. Technical Details Typical Specifications: Feeding size: ≤25 mm Discharge size: 0.074–0.4 mm Capacity: 0.65–615 t/h (depending on model and material hardness) Cylinder speed: 18–38 r/min Power: 18.5–4500 kW Liner material: High manganese steel, rubber, or alloy steel Grinding media load: 30–45% of cylinder volume Operating Modes: Dry grinding: Suitable for materials that must remain moisture-free, such as cement clinker, limestone, and quartz. Wet grinding: Common in ore beneficiation, where water or slurry improves grinding efficiency and particle uniformity. Application in Mining Plants In mining operations, ball mills are used after crushing to further reduce ore size and liberate valuable minerals. They are integrated into grinding circuits with classifiers, hydrocyclones, and flotation systems. The ground material is classified by size, and oversized particles are returned to the mill for regrinding. This closed-circuit system ensures consistent product fineness and efficient energy use. Common Applications: Gold, copper, iron, and zinc ore grinding Cement clinker and slag processing Pgodsq Nf U Espfx Af Sst Silicate and ceramic powder production Coal and mineral powder preparation Conclusion A ball mill is an indispensable piece of equipment in both powder production and mining beneficiation plants. Its ability to grind materials into fine, uniform particles makes it vital for downstream processes such as flotation, sintering, and chemical reactions.

Condition: used, Year of construction: 2009, operating hours: 4,050 h, Thermoformer Pgedpfx Aozr N U Eof Sjt Make: Multivac Model: R245 Built 2009 Low running hours: 4050hrs from New! Ex bakery: used for flexi film on Bagels Lots of spare parts included

Condition: like new (used), Year of construction: 2023, operating hours: 600 h, functionality: fully functional, feed length X-axis: 1,500 mm, workpiece weight (max.): 100 kg, working width: 1,500 mm, total length: 6,000 mm, type of input current: three-phase, input voltage: 400 V, Equipment: cabin, Painting system with two separate pumps, allowing for the use of different liquids (e.g., gloss and matte paint). System manufactured in 2023. Selling due to a change in printing technology. Pedpfxjzfy Upj Af Sjgt

Year of construction: 1998, condition: used, Grinder for sharpening FOR TOOLS GRIFO F36 M FOR TOOLS FOR WOOD FACTORY WHIT PUMP HYDRAULIC AND SANDER dividing chain, SAWS, MILLING CUTTERS Pgodpfx Afjb Umtks Sst

Year of construction: 1980, condition: used, TAŚMÓWKI FOR FOAM BULLMER WERK 7759 Location Gorzow Wielkopolski. Conditions of delivery Pick your own Cost of delivery Client cover startup type negotiated Description Comments MACHINE FOR CUTTING UPHOLSTERY FOAM ENGINE 1 kW, 220/380 VOLT, HAS A NOSE-STONES TO SAW TAPE LENGTH WITHOUT END 4050 mm, cutting width 1100 mm, table length 2250 mm, table width 1170 mm Pgodpfx Afocr Ru Ds Sst

Year of construction: 1990, condition: used, Year of manufacture: Sep 2000 New: No No guarantee. Please contact us if you can't find what you are looking for. Pedpfjvzyvpsx Af Sjgt

Condition: used, Year of construction: 2018, operating hours: 6,000 h, functionality: fully functional, We are offering this used FOR REC Rotary Shear FX5000 4x90 KW, manufactured in 2018. Make: FOR REC Model: Rotary Shear FX5000 4x90 KW Year of manufacture: 2018 Condition: used Operating hours: 6000 The supply includes: - FOR REC FX5000 rotary shear complete with hopper and discharge chute. - Remote control - Electrical control panel with HMI touchscreen and existing connection cables - Hydraulic power unit 4x90 KW complete with oil cooling system and existing hydraulic hoses - Documentation (User Manual, Electrical and Hydraulic Diagrams) - 1 set of spare rotors with new blades installed Psdozf Adgspfx Af Sogt - Other spare wear and replacement parts If you have any questions or require further information, please do not hesitate to send us a message or give us a call.

Condition: good (used), Year of construction: 2019, operating hours: 2,662 h, functionality: fully functional, power: 80.17 kW (109.00 HP), fuel type: diesel, color: orange, fuel: diesel, gearing type: hydrostat, Equipment: soot filter, HAKO Citymaster 2200 Municipal equipment carrier with a 3-brush suction sweeper unit Pjdpfx Aez D D Emef Ssgt This Hako Citymaster 2200 was first put into operation in 2019 and has approximately 2,662 total operating hours / 1,610 hydraulic hours / 22,980 km according to the meter. It is in good overall condition with the usual signs of wear and tear, has just undergone a minor service, and is ready for immediate use. Comparable new price: €180,000! The sale is of a used machine and excludes any right of return, warranty, or guarantee. - Net price: €33,529 // Gross price: €39,900 - Inspection / test drive is possible - Shipping can be arranged nationwide; the costs depend on the distance! - We will gladly have our leasing partner prepare an attractive leasing/financing offer for you!

Condition: new, Year of construction: 2026, functionality: fully functional, power: 400 kW (543.85 HP), Ore Beneficiation Plant for Nickel, Copper, Zinc, Graphite, Gold, Silver, Chrome, Quartz/Silica In today’s competitive mining and metallurgical industry, maximizing ore value is critical. Our state-of-the-art Ore Beneficiation Plant offers a complete solution designed to increase the content and quality of raw ore, transforming it into a marketable product ready for further processing or direct sale. Engineered for a wide range of minerals—including nickel, copper, zinc, graphite, gold, silver, chrome, and quartz/silica—our ore beneficiation plant delivers exceptional performance, efficiency, and reliability. Introduction Mining operations around the world face the challenge of processing ores that are often low in grade and require extensive refinement to be economically viable. Beneficiation—the process of increasing the concentration of valuable minerals—plays a vital role in reducing operational costs, enhancing recovery, and ultimately, ensuring profitability. Our ore beneficiation plant, also known as an ore processing plant or mine dressing plant, integrates advanced technology and robust engineering to deliver an efficient crushing, grinding, classifying, and separation process. Designed to handle a wide variety of ores, our plant is the ideal solution for mining companies looking to optimize their extraction and processing operations. Whether you’re processing nickel, copper, zinc, graphite, gold, silver, chrome, or quartz/silica, our plant provides the versatility and performance needed to meet today’s rigorous industrial standards. ## What Is an Ore Beneficiation Plant? An ore beneficiation plant is a facility where raw ore is processed to improve its quality and increase the concentration of valuable minerals. The plant typically includes several stages of processing: Pgedpfjq Nw Uqsx Af Set 1. Crushing: The raw ore is reduced in size to allow for more efficient downstream processing. 2. Grinding: Further size reduction to liberate the valuable minerals from the waste material. 3. Classifying: Separation of the ore into different size fractions using screening and hydrocyclones. 4. Separation: Employing various physical processes such as magnetic separation, flotation, or gravity separation to concentrate the valuable minerals. 5. Dewatering: Removal of excess water to prepare the concentrate for further processing or shipping. This integrated process not only boosts the metal content but also minimizes waste, thereby improving overall cost efficiency and environmental sustainability.

Condition: used, Year of construction: 2005, functionality: fully functional, fuel type: electric, empty load weight: 172 kg, total length: 1,530 mm, construction height: 1,050 mm, drive type: Elektro, construction width: 1,100 mm, Sweeper Condition: Ready for use and fully functional Technical condition: normal Front tire size: 3.00-4 Description: In addition to this Hako model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Lease purchase and financing at favorable terms are possible for us at any time. We also gladly buy your used vehicles outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this B755. P.S.: Our forklift repair shop specializes in repair, maintenance, overhaul, and custom fabrication for forklifts from 8 tons upwards. We will also gladly display your vehicle in our showroom for consignment sales. Podpfez Ev I Nex Af Sjgt Working width: 750 mm; Effective sweeping width: 1100 mm