Used Temperature Control Unit, Chiller for sale (60,219)

Condition: used, Tempering, Circulating fluid tempering, Thermolator, Used machine Manufacturer: Industrial Frigo Típus: TW 9/95/x Year of manufacture: 2008 Weight: 190 Kg Ljdpfx Aioyrtk Sjishh Overall dimensions: 1300 x 450 x 1200 mm Max. temperature: 95 °C Pressure: 4,35 bar Electrical data: 400 V ; 50 Hz ; 26 A ; 10 kW

Condition: new, *Technical specification: -air-cooled, 25.5 kW referred to +10°C flow temperature at an ambient temperature of +32°C. -temperature range flow: +5°C to +30°C (optionally lower temperatures down to -5°C possible) -air flow rate: 8,000 m³/h -max. air inlet temperature: +30°C -Optionally with heating capacity up to 24kW Lhodpfxeg Ewwre Aiieh *Pumps: -Delivery capacity up to 150 ltr/ min. -Delivery pressure up to max. 4 or 7 bar -Motor output 1.1 or 2.2 kW *Dimensions: -L/W/H: 1,450 mm x 750 mm x 1,680 mm -empty weight: approx. 480 kg -Circulation medium connection: DN 32 IG *Details & Highlights: -Internal refrigerant: R 123 a -Power supply: 380-425V/ 50Hz -Regulation and control unit SBC-T -Setpoint and actual value display, alarm display -Fully hermetic reciprocating compressor -Refrigerant receiver with safety valve according to DIN EN 378 -capacity control -frost protection monitoring -Flow monitoring -grid cover over condenser -oil sump heater -drainage device -Level monitoring by magnetic float switch -installed dirt trap in the return line in the circulating medium -overflow valve between flow and return as pump protection, fixed setting -high and low pressure limiter according to DIN EN 378 -stainless steel tank, capacity: 80 litres, open system completely insulated Self-supporting housing with castors, mobile -system for indoor installation -control box IP 54 Other performance classes are available on request. Visit our homepage for further details. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, year of last overhaul: 2024, total height: 220 mm, total length: 720 mm, total width: 380 mm, type of input current: AC, Temperature control unit Jufeba TG 1-3 T Jufeba model: TG 1-3 T Tabletop unit with container Manual temperature control Robust design 230V connection Used unit, cleaned & tested according to SAB standards Includes warranty + spare parts service Lhsdpfxsxvk Hde Aiioh We have many more temperature control units in stock!

Condition: excellent (used), Wittmann Temperature Controller Here we offer a Wittmann temperature controller. Lhedjzd Ruwjpfx Aiish Wittmann Temperature Controller DISCO 2 Singulus 3X415V 50/60Hz 16A 5kW Type: TR7B7D7D0X_09_00 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Autotherm Here we offer a 6-circuit temperature control unit. Without an active refrigeration unit! According to the enclosed technical brief: Temperature range: -40°C … +85°C (extended temperature range -40°C…+130°C) Increased heating capacity: 27 kW instead of 18 kW Includes 1 temperature control in the main circuit Includes 6 temperature measurements in the respective supply line Includes 6 temperature measurements in the respective return line Includes 6 flow rate and pressure measurements in the respective supply line Includes 6 flow rate and pressure controls 1 l/min .. 12 l/min and 0.1 bar … 3 bar Includes changeover control Includes frequency inverter-controlled pump in the main circuit Lhedpfxezd Rtyj Aiish Includes 6x 3-way valve Includes 6 additional overflow valves, adjustable from 2 … 12 bar Pre-set to 2.4 bar Includes filling and emptying device For all circuits, common/simultaneous operation Includes 50l integrated tank Includes pneumatic emptying function Includes S7 control system Energy saving and increased cooling capacity: An additional glycol circuit integrated in the temperature control circuit takes over the cooling of the consumer in a temperature range of +85°C to +30°C. The absorbed energy is transferred to the on-site < 20°C cold water network. The cooling capacity is 50 kW at a supply temperature of +20°C. This increases the cooling rate in this temperature range and saves energy due to the shorter running time of the refrigerant compressor. (The dimensions of the basic unit, according to the data sheet, are increased by approx. 0.3 m²) Assembly in a Rittal modular enclosure: 2x TS8 800x1000x2000 mm 1x additional, enclosed enclosure, min. 600x600x2000 mm (for control/electrical components) Supplied via on-site or optional cooling medium supply Supply temperature, on-site cooling brine -43°C, cooling brine requirement 7.5 m³/h, continuously controlled For cooling capacity, a cooling medium must be connected! Weight approx. 1200 kg Type: Autotherm temperature control unit AWF 130-27/VK/6K Sale from our location! Condition: used Scope of supply: (See picture) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Year of construction: 2017, condition: like new (used), The two temperature control units from GWK were purchased and used solely for testing purposes. Both units have approximately 1000 operating hours. The units have been tested for functionality in my workshop. The price is per unit. Medium: Water Heating capacity: 9 kW Cooling capacity: 40 kW Lhjdezf Nzrepfx Aiieh All other technical data available upon request!

Year of construction: 2016, condition: ready for operation (used), A high-temperature water temperature control unit for injection molding tools, extrusion systems, die-casting tools and industrial temperature control processes up to 200°C is offered. Temperature range: 0°C to 200°C, circulating medium: water, heating capacity: 45kW, cooling capacity: 120kW, filling volume main unit: 32l, filling volume valve unit: 2l, weight: approx. 300kg, dimensions X/Y/Z: approx. 700mm/900mm/1900mm, weight of the valve unit: 37kg. Equipped with control via touch-screen visualization, separate control cabinet and external valve unit for high-temperature applications. Documentation available. Inspection possible by appointment. Lhodszfp Huopfx Aiijh

Condition: used, circulating medium 25 °C Cooling capacity 10 kW Rated power supply 5,45 kW Operating/control voltage 400-415/24 V / 50 Hz Lhedpfx Aszbc Hbjiijh Rated current/max. fuse 15,2 / 25 A The temperature control units are, in our assessment, in good used condition. The offer includes two units. Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, input frequency: 50 Hz, DGUV certified until: 07/2027, type of input current: AC, Temperature control unit Thermo Quick Duo Temperature control unit for chocolate Model: Thermo-Quick Duo with 2 removable bowls Control via thermostat (70°C) Lhjdpfxoygda Hj Aiioh Connection: 230 V Dimensions: 760 x 410 x 240 mm (W x D x H) Used equipment We have many other units in stock!

Year of construction: 2015, condition: excellent (used), The temperature control unit is for sale ;2015- the new price was 4995€ Medium : Water Functions - Function for self-optimizing temperature control - Function and fault displays - User-dependent and password-protected rights - Limit comparator (tolerance band monitoring of the actual value with alarm message) - Adjustable setpoint limit - Weekly timer - Automatic heating and cooling program - Freely selectable ramp function for temperature changes during heating and cooling - VNC server via Ethernet (enables complete operation and management from the PC) - 2nd temperature setpoint - Tool management (setpoints and control parameters can be be saved as a recipe) - Measured value recording for quality assurance (actual values can be be output to SD card with time stamp) - Electronic level monitoring with dry run protection Lhjdem Dtm Aspfx Aiioh - Automatic filling and replenishment with leakage and level function monitoring level function monitoring - Automatic venting Monitoring/safety - Short-circuit-proof controller and control outputs - Temperature sensor in circulating medium flow and return - Safety temperature limiter to prevent overheating and Safety valves against overpressure - Contactless heating control with solid state relay - Safety temperature reduction when switching off - Acoustic and visual warning signal with symbol and text text on the touch screen- Symmetrical mains load with three-phase drive and three-phase heating elements three-phase current heating rods - 3-fold safety shutdown of the heater - Reversible circuit breakers and motor protection switch - Dirt trap in the cooling water supply Hydraulics - Continuous cooling via motor valve

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, year of last overhaul: 2026, total height: 220 mm, total length: 825 mm, total width: 575 mm, type of input current: AC, control voltage: 220 V, DGUV certified until: 07/2027, Jufeba temperature control unit Lhodpst U Uxuofx Aiioh Tabletop model: TG 2-2 T Stainless steel design Dry heating Simple temperature control Top-quality technology Connection: 230V, ready for plug-in Dimensions: 575 x 825 x 220 mm (W x D x H) Used unit, cleaned & SAB inspected Many other temperature control units in stock!

Year of construction: 2011, operating hours: 34,000 h, condition: used, functionality: fully functional, A dual-temperature control unit from Single is for sale. The original purchase price was approximately €5,100. Medium: Water Reinforced pump Heating capacity: 9 kW per unit Cooling capacity: 20 kW per unit Mobile Interface, 20 mA PT 100 sensor Flow measurement Lhsdpfozbx Rpex Aiijh Alarm

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, year of last overhaul: 2026, type of input current: AC, input current: 10 A, DGUV certified until: 06/2027, Jufeba TG 1-3 T temperature control unit TOP table-top unit with container Stainless steel design Ledsxiu Hbspfx Aiiohh Dry heating system Manual temperature control Robust technology 230V connection Used unit, cleaned With warranty + spare parts service Optional: Maintenance contract Stainless steel GM container Delivery service Training & commissioning Visit our large showroom!

Year of construction: 2014, operating hours: 150 h, condition: as good as new (ex-display), The temperature control unit from GWK is for sale; it was only used at trade shows. I would be happy to send you a description of the unit! Medium: Water / 30% glycol Heating capacity: 9 kW Operating temperature: max. 160 degrees Celsius Cooling capacity: 40 kW Lsdpfoza U Dcex Aiijhh Cooling: Heat exchanger Mobile

Condition: ready for operation (used), 27 kW, 90 degrees Celsius Two units in stock. Lodpezab Syjfx Aiishh Warranty: 6 months.

Condition: ready for operation (used), 12 kW, 140 degrees Celsius. Three units in stock. Warranty: 6 months. Ledpfx Aezab S Hoiijhh

Condition: ready for operation (used), 9 kW, 150 degrees Celsius Two units in stock Warranty: 6 months Ljdpfozab A Ejx Aiijhh

Condition: used, Year of construction: 2009, machine/vehicle number: 090924, Temperature control unit manufactured by Single, used and untested. The device is intended for applications in tool temperature control, injection molding, and industrial process engineering. It operates as a single-circuit system with an SBC control system. The medium used is water*; the maximum flow temperature is 30 °C. Heating output is not specified; pump performance is 28 l/min at 3.2 bar*. Year of manufacture is 2009, and the total weight is 105 kg. Lhsdoy Su Efepfx Aiijh

Condition: used, machine/vehicle number: 0926292, Year of construction: 2009, Temperature control unit manufactured by Single, used and untested. The device is intended for applications in tool temperature control, injection molding, and industrial process engineering. It operates as a single-circuit system with an SBC control system. The medium used is water*; the maximum flow temperature is 30 °C. Heating output is not specified; pump performance is 28 l/min at 3.2 bar*. Year of manufacture is 2009, and the total weight is 105 kg. Lsdpfx Ajy Su D Usiiohh

Condition: used, machine/vehicle number: 462962, Temperature control unit from manufacturer Regloplas, used and untested. The unit is designed for applications in tool temperature control, injection molding, and industrial process technology. It operates as a single-circuit system with the RT 45 control system. Oil is used as the medium, with a maximum flow temperature of 250 °C. The heating capacity is 13.7 kW, and the pump capacity is 60 l/min at 3.5 bar*. Year of manufacture is not specified, total weight is 145 kg. Lsdey Su D Ispfx Aiishh

Condition: used, machine/vehicle number: 543109, Temperature control unit from manufacturer Regloplas, used and untested. The unit is suitable for mold temperature control, injection molding, and industrial process applications. It operates as a single-circuit system equipped with the RT 45 control system. The heat transfer medium is oil, with a maximum flow temperature of 300 °C. Heating power is 13.5 kW; pump capacity is 60 l/min at 3.5 bar*. Year of manufacture is not specified, total weight is 160 kg. Lodpfx Aoy Su Dhsiiehh

Condition: used, Year of construction: 2011, machine/vehicle number: 408529.10.000/01, Temperature control unit manufactured by Hahn Automation, used and untested. Designed for applications in tool temperature control, injection molding, and industrial process engineering. Operates as a single-circuit system with REMAK control system. The working medium is water*, with a maximum flow temperature of 95 °C*. Heating capacity is 27 kW, pump capacity is 60 l/min at 4.5 bar*. Year of manufacture: 2010, total weight: 130 kg. Lodpfx Aijy Su A Rjijhh

Condition: used, Year of construction: 2011, machine/vehicle number: 253321-01-03, Temperature control unit by gwk, pre-owned and untested. Designed for mold temperature control, injection molding, and industrial process technology applications. Operates as a single-circuit system with the Logotherm control system. The unit uses water* as the heat transfer medium, with a maximum supply temperature of 30 °C*. Heating capacity is not specified; pump capacity is 35 l/min at 3.5 bar*. Year of manufacture: 2011. Total weight: 200 kg. Lhedpfx Aioy Su Aqjish

Condition: used, Year of construction: 2011, machine/vehicle number: 253321-01-04, Temperature control unit by gwk, used and untested. Designed for tool temperature regulation, injection molding, and industrial process engineering. Operates as a single-circuit system with Logotherm control. Uses water* as the medium, with a maximum supply temperature of 30 °C. Heating capacity not specified, pump delivers 35 l/min at 3.5 bar*. Year of manufacture: 2011. Total weight: 200 kg. Ledpfxjy Su Adj Aiishh

Condition: used, Year of construction: 1999, machine/vehicle number: 14490/99, Temperature control unit by Robamat, used and untested. Designed for mold temperature control, injection molding, and industrial process engineering applications. The unit features a dual-circuit system with a Thermocast 4212 control system and two µP103 Mega control units. Operating medium: oil*. Maximum flow temperature: 320 °C. Heating capacity: 2x 34 kW*. Pump output: 75 l/min at 5.0 bar*. Year of manufacture: 1999. Total weight: 350 kg. Lodpsy Surfefx Aiiohh