Used Tankki 2010 for sale (1,221)

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Item: F-4001-4008-Jacket40m3Vertical Used vertical jacketed insulated tanks Lodpfszg Darsx Apmshk Exterior dimensions: Diameter Ø 3565 mm, Total Height 6951 mm. Vertical, insulated stainless steel process tanks – 8 units. Cooling/heating jacket. Top-mounted agitator. AISI 304

Year of construction: 2017, condition: excellent (used), functionality: fully functional, machine/vehicle number: SN 04/17, Take your clinic, rehabilitation centre, or sports facility to the next level with the KrioSystem KR-2010 Whole-Body Cryochamber, a premium cryotherapy solution from one of Europe's leading cryogenic technology manufacturers. Designed for high-performance medical, rehabilitation, and sports recovery applications, the KR-2010 treats 20–30 patients per hour while accommodating 2–4 patients simultaneously at therapeutic temperatures ranging from -110°C to -160°C. Powered by liquid nitrogen and equipped with advanced safety systems, including oxygen monitoring and emergency alarms, this medical device delivers safe, effective, and clinically proven whole-body cryotherapy for pain relief, injury recovery, arthritis management, improved circulation, muscle relaxation, and enhanced wellbeing. Lsdpfx Apjzq At Eemshk Ready to ship container.

Condition: excellent (used), The DAGE Series 4000 Bond Tester is a professional device designed for performing Bond Pull and Die Shear tests in the semiconductor and electronics industries. This device is used in quality control laboratories, research and development departments, and during the production of microelectronic components. This unit is equipped with a precision positioning table, joystick controls, a keypad panel, and work lighting. The set also includes the original PCI control card (Baldor NextMove PCI-2 Motion Control Card) and additional electronic components visible in the photos, which are a valuable addition to the set. Technical data: Manufacturer: DAGE (Nordson DAGE) Model: DAGE Series 4000 Bond Tester Year of manufacture: 2010 Power supply: 110 / 230 V AC, 1-phase Frequency: 50/60 Hz Power: 250 VA Control: joysticks and keypad Precision XY positioning table Required compressed air: 4 bar (oil-free) Vacuum connection Lhodpfxozma Tbj Apmjk Excellent visual condition. The set being sold is consistent with the presented photos and includes all visible components, including the additional PCI control card.

Condition: used, mileage: 891,000 km, power: 228 kW (309.99 HP), first registration: 01/2010, fuel type: diesel, overall weight: 19,000 kg, axle configuration: 4x2, fuel: diesel, gearing type: automatic, Year of construction: 2010, The turbocharger is defective! (TURBOCHARGER DAMAGE) Not roadworthy! Otherwise, the engine and transmission are in good condition! Lhodpst Tw Szjfx Apmek Length of the box: 6.50 m Height of the box (inside): approx. 2.25 m

Condition: new, Year of construction: 2025, functionality: fully functional, Our powerful "MM 2010" sandblasting cabinet uses a pressure blasting process and, thanks to its innovative media recirculation system, is suitable for all types of blasting media. Lhjdpfx Aowc Nrnjpmok Thanks to the bucket elevator permanently connected to the cabinet, even the heaviest types of blasting media, such as stainless steel, cast steel, and other metallic media, can be used without any problems. Unlike competing systems, the blasting media is not sucked back into the cabinet, but rather transported to the adjacent bucket elevator via a flat conveyor system. The bucket elevator conveys the material upwards and throws it into the cyclone separator, where the blasting media is cleaned and returned to the blasting process. Our specially developed media recirculation recycling system ensures continuous media flow, regardless of the extraction system's suction power. Thanks to the media recirculation system and the innovative fan technology, the blasting cabinet has very low energy requirements (0.75 kW fan motor). Since the blasting material is not sucked back in, no oversized extraction system with high power consumption is required (as with many competitive systems). To achieve maximum blasting performance, the "MM 2010" pressure blasting cabinet is equipped with a 60-liter pressure blasting tank. This is equipped with a pressure regulator for continuously adjusting the blasting pressure from 0.1 to 12 bar. For safe operation, a water separator is permanently mounted on the blasting tank, protecting the blasting media from moisture. The pressure blasting nozzle is made of highly wear-resistant boron carbide and allows a service life of up to 1,000 hours, depending on the blasting media used. The blasting chamber is equipped with a wear-resistant rubber lining, which increases the service life of the blasting media and protects the blasting cabinet from wear. An air blow gun is installed for cleaning the blasted workpieces and blowing off the cabinet walls. The permanently installed cartridge filter extraction system ensures optimal visibility in the blast chamber and maximum abrasive service life. The extraction system features continuous cleaning of the filter cartridges using compressed air blasts. This ensures a long service life of the filter media and consistently consistent extraction performance. The blast chamber is loaded via an angled front flap that swings completely upwards. This allows the blast cabinet to be loaded using a forklift or crane. The sturdy work grate can support a maximum load of 500 kg. To ensure optimal visibility in the blast chamber, two powerful and energy-saving LED lights are mounted on the cabin roof. Their roof-mounted design protects them from dust and wear. The system is operated via a modern touchscreen display. To ensure safe operation of the blast cabinet, the blast cabinet is equipped with a door safety switch. The installed viewing windows are made of toughened safety glass and are provided with a wear-resistant film.

Condition: used, Year of construction: 2010, functionality: fully functional, 3500 kVA (1750/1750 kVA) cast resin transformer, manufacturer SGB, year of manufacture 2010, primary side 20 kV, secondary side 2 x 690 V, Dy5d6. Lsdjza Ugqopfx Apmjhk

Condition: used, Year of construction: 2006, Item: AV-12167-AV2168-50m3 Pressure Tank Capacity: 49,900 L Exterior Dimensions: Diameter Ø 3500/3550 mm, Total Height 6200 mm. Used, vertical, identical stainless steel pressure tanks – 2 pcs. Insulated with Armaflex. Ø 600 mm manhole located in the lower part of the cylinder. Year of manufacture: 2006 Test Pressure: 2.86 bar Material: AISI 304 Vertical Stainless Steel Pressure Tank – 49,900 L (TÄNKKI, Finland) High-quality vertical pressure vessel manufactured by TÄNKKI Oy, Ähtäri, Finland. Constructed in accordance with EN 13445-3 and CE certified (Notified Body 0875) for use with non-hazardous liquids (Group 2). Technical Specifications Manufacturer: TÄNKKI Oy, Ähtäri, Finland Year of manufacture: 2006 Serial number: 2344/06 Volume: 49,900 liters (≈ 49.9 m³) Design pressure: 2.0 bar(g) Test pressure: 2.86 bar(g) Temperature range: 0 °C to +50 °C Design standard: EN 13445-3 (PED compliant) Lsdpfx Apev Tnqlemshk Media group: 2 (non-hazardous liquids) Orientation: Vertical, self-supporting construction Description This vertical stainless steel pressure tank is engineered for low-pressure storage and processing applications, making it ideal for water, milk, whey, or other food and process liquids. The tank is constructed from premium-grade stainless steel, guaranteeing long service life, durability, and full compliance with EU PED regulations.

Condition: used, Year of construction: 2010, IMT W20 T2 Vertical Lathe Control: Fanuc 32i-Model A Turning Diameter: 542 mm Chuck: Schunk 500 160 Turning Length: 450 mm Lhedpfx Apjwb Svgomjk Maximum Swing Diameter: 640 mm Maximum Speed (rpm): 2500 Spindle Power: 29.5 HP X-Axis Travel: 450 mm Z-Axis Travel: 450 mm X-Axis Rapid Traverse: 15,000 mm/min Z-Axis Rapid Traverse: 15,000 mm/min Number of Turning Tools: 6

Condition: used, Year of construction: 2010, machine/vehicle number: GA25, Used ROBINO & GALANDRINO WIREHOODER 14000 BPH - Year 2010Technical Specifications & Performance DataThe Robino & Galandrino RECORD 14000 is a high-performance wire-hooding machine engineered for consistent and precise application of wirehoods on glass bottles. Built in 2010, this second hand unit has been maintained in working condition and is well-suited to upgrade an existing used bottling line or expand industrial packaging capacity in beverage production. Its robust design and dependable mechanics enable stable, continuous operation at elevated speeds typical of modern bottling equipment.Machine Type: WirehooderManufacturer: Robino & GalandrinoModel: RECORD 14000Year of manufacture: 2010Production speed: up to 14,000 bottles/hourContainer types: Designed for Glass bottle handlingApplication: Wirehood application for sparkling beveragesElectrical supply: 400 V, 3-phaseFrequency: 50 HzNominal current (In): 4.15 AProtection (ICC): 20 AWiring diagram code: REC262Certification: CEAdvanced Automation & Control SystemsThe machine integrates an industrial electrical system referenced by wiring diagram code REC262 and operates on a 400 V 3-phase, 50 Hz supply. Designed with CE-compliant safeguards, the wirehooder supports reliable, repeatable performance with consistent wirehood placement and twist integrity. Safety interlocks and emergency-stop circuitry help protect operators during operation and changeovers. The unit’s design facilitates quick adjustments for bottle handling components, simplifying setup across compatible formats and maintaining high uptime on a modern packaging line.Production Line Integration CapabilitiesThis wirehooder integrates seamlessly downstream of corking and upstream of labeling within a glass bottling line. It is compatible with standard conveyor interfaces and can be synchronized with upstream and downstream equipment such as corkers, foil applicators, labeling machines, and secondary packaging systems. The RECORD 14000 supports continuous in-line operation or can be configured as a standalone station with appropriate infeed and outfeed conveyors. Its performance profile and interface flexibility make it an effective addition to beverage production lines focused on sparkling products packaged in glass bottles.Machine Condition & Maintenance HistoryThe unit remained in production until the end of March 2026 and is currently in working condition. It has been inspected, cleaned, and lubricated, demonstrating careful upkeep consistent with efficient line operation. The machine is available immediately, enabling rapid deployment and minimal downtime for facilities seeking to augment capacity or replace an older wire-hooding station.Operational Performance & VersatilityEngineered by Robino & Galandrino, the RECORD 14000 delivers high-speed wirehood application with stable bottle handling and consistent twist quality. Its construction supports sustaine... Lhodpfxezvprle Apmok

Condition: new, mileage: 3,548 km, color: red, lifting height: 30,000 mm, Year of construction: 2010, operating hours: 3,548 h, Drivetrain Make of engine: Honda Weights Empty weight: 3.500 kg Functional Lifting capacity: 1.400 kg CE mark: yes History Number of owners: 2 Other information Front tyres / undercarriage remaining: 80 Lhodszvml Aopfx Apmsk Rear tyres remaining : 80 Latest inspection: 2026-04-09 Production country: DE Additional information Please contact Michael Overmeer for more information Böcker AHK 30/1400 trailer crane construction year 2010 with only 3.548 hours. Machine is in a nice condition (last technical inspection and maintenance 04-2026) and has among other things: Honda gasoline engine, hydraulic wheel drive operable from remote (extra option!), new stamping plates, new hoisting cable, hydraulic support legs, storage box, operated by remote control. Changes and typographical errors reserved.

Condition: used, Year of construction: 2010, Edge milling machine Manufacturer: Brandt Type: FTK 130 Year of manufacture: 2010 Note: The technical data and descriptions are a transcript of the original order confirmation. The data is provided for informational purposes only and is not binding. Lodpfozuzlhox Apmshk

Condition: used, Year of construction: 2010, Edge banding machine Manufacturer: Brandt Type: Optimat KTD 720 Year of manufacture: 2010 Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding. Lhsdpfx Aszuzlbopmjk

Condition: used, Year of construction: 2010, - Perfect for surface finishing - Constant working height - Q/L/Q Fine/cross-sanding machine Manufacturer: Weber Type: KSF-3-1350 Year of manufacture: 2010 Technical data - Equipped with 3 sanding belts for high-quality fine, veneer, and high-gloss sanding. - With a constant working height Machine frame - Heavy-duty steel welded construction for mounting 3 sanding units - Constant inlet height of 900 mm - Control and sanding belt change side on the inlet side, on the left - Stepless feed speed of 3-18 m/min, frequency-controlled. - Vacuum version of the conveyor belt / with 1 vacuum blower 5.5 kW, and a vacuum channel up to the upper edge of the machine Unit 1: Cross-belt unit - Pressure pad belt with felt and graphite for long service life - ISD segmented pressure bar system with 11 mm workpiece detection and 44 mm pressure pad width - Workpiece-controlled sanding belt blowing device Unit 2: CBF combination unit - One grooved rubber contact roller 0 130 mm, rubber hardness 60 Shore - One cross-running flap band with separate drive 4.0 kw - ISA segmented pressure bar system with 11 mm workpiece detection and 22 mm pressure pad width (counter-rotating) - Workpiece-controlled oscillating sanding belt blowing device Unit 3: Cross-belt unit - ISD segmented pressure bar system with 11 mm workpiece detection and 44 mm pressure pad width - Workpiece-controlled sanding belt blowing device Operator terminal SIEMENS" MP 377 12" Multi-Panel - Graphical user guidance via 12" color display - Program memory with 300 programs - Setting of all parameters via program WEBER i-Touch control - One rotary knob for navigating through the most important functions WEBER AWDM - Automatic thickness adjustment at the machine inlet with start switch Overthickness - Selector switch at the machine inlet with the following functions: - Automatic lifting of the contact roller and the segmented pressure bars - Feed stop ISA/ISD control - High-resolution workpiece detection in a 22 mm grid - Free loading of complex part shapes - Multiple loading with a small lateral distance - Sanding intensity individually adjustable at all edges - Sanding pressure adjustable via program ISA segmented pressure bar system (Unit 2) - Pressure pad movable in the longitudinal and transverse direction ISD segmented pressure bar system (Unit 1+3) As ISA, but additionally with - Separate adjustable pressure for the edge area (higher or lower) - Optionally only on the outer edge or outer and inner edges - Longitudinal and transverse edges or only longitudinal edges can be adjusted Workpiece blowing device - with WEBER ES system - Energy-saving, workpiece-controlled workpiece cleaning with single slider control WANDRES-Micro-Cleaning (single brush version) - Power sword brush with integrated micro-humidification of the linear brush (for optimal paint dust removal) Technical data - Working width: 1350 mm - Drive Unit 1 (frequency-controlled-Eco-Drive): 15.0 kW - Drive Unit 2 (frequency-controlled-Eco-Drive): 20.0 kW - Drive Unit 3 (frequency-controlled-Eco-Drive): 15.0 kW - Drive CBF: 3.0 kW - Drive vacuum blower: 5.5 kW - Drive feed (frequency-controlled): 3.0 kW - Drive height adjustment (frequency-controlled): 0.75 kW - Sanding belt speed (frequency-controlled): approx. 3-20 m/s - Sanding belt dimensions cross belts (W x L): 2x150x5100 mm - Sanding belt dimensions wide belt (W x L): 1370x2620 mm - Workpiece thickness (min./max.): 4-140 mm - Working height (constant): 900 mm - S Lhjdpfozuzctjx Apmjk

Condition: used, Year of construction: 2010, - Release agent application, top and bottom - Scoring saw with 2.2 kW motor - Trimming unit with 8.0 kW motor - Double milling unit with 2 motors, each 4.5 kW - Gluing unit - End trimming unit - Flush trimming unit - Multi-function unit - Multi-profile edge trimming unit - Spray nozzles, top and bottom - Flat edge trimming unit - Buffing unit - Grooving unit Double-sided edge banding machine Manufacturer: IMA Type: Combima/II/390/B/L12 Year of manufacture: 2010 For longitudinal and transverse feed - 2 low-maintenance precision roller chains with 75 mm wide and 85 mm long, rubber-coated chain plates, with cams - Spacing 1080 mm. Pneumatically adjustable to heights of 8, 16 or 24 mm. ICOS OPEN control system - Max. feed width 3,300 mm - Program-controlled master + slave width adjustment - Fixed stop on the left in feed direction Workpiece dimensions - Min. feed width 244 mm (for longitudinal processing) - Max. workpiece width (chain extension) 1,300 mm - Min. workpiece thickness 8 mm - Max. workpiece thickness 45 mm (with copying function) / 60 mm (without copying) Edge material: - Min. height 14 mm, max. height 65 mm - Roll material min. thickness 0.3 mm, max. thickness 3 mm Strips and edgebanding: - Min. thickness 0.8 mm, max. thickness 12 mm Feed speed - 10 - 50 m/min. with frequency-controlled drive. Infeed device - with 5 top-mounted, inclined and driven rollers. Center support with roller track - automatically lowerable and automatically centering. Equipped on each side with: Release agent application, top and bottom Ledpezuyqiefx Apmohk Scoring saw with 2.2 kW motor, 100 Hz, 6,000 RPM, pneumatically controlled. - Electronic positioning for stepless horizontal adjustment. - Vertical adjustment manually with mechanical display. Trimming unit with 8.0 kW motor, 100 Hz, 6,000 RPM. - Electronic positioning for stepless horizontal adjustment. Double milling unit with 2 motors, each 4.5 kW, 150 Hz, 9,000 RPM. - Electronic positioning for stepless horizontal adjustment. - Vertical adjustment manually with mechanical display. Gluing unit for hot melt adhesive - With single roll/edgebanding magazine for roll material up to 3 mm and edgebanding up to 12 mm - 2-fold roll magazine for roll materials up to 3 mm (can be attached to the single roll magazine) - Horizontal roll holder End trimming unit - Mounted on the upper pressure beam, with 2 motors, each 660 W, 200 Hz - Pneumatic swivel 0 + 25 for straight and miter cuts. - Automatic adjustment for miter cuts with two different edge thicknesses (e.g. 0.4 and 1.2 mm) and for "edge overhang" for copying with edge thickness 1.0 - 3.0 mm. Automatic adjustment to the feed speed 20+30 m/min. Flush trimming unit 08.0555 - With 2 motors 1,850 W, 200 Hz, 12,000 RPM. Multi-function unit 08.353 - NC controlled with 2 motors, with automatic tooling for 4 profiles. Multi-profile edge trimming unit - with automatic tooling for 4 profiles via fixed-point control Spray nozzles, top and bottom - for applying cleaning agents Flat edge trimming unit Buffing unit - With 2 motors, each 180 W, 50 Hz, 1400 RPM. 1 Grooving unit - With 4.5 kW motor, 150 Hz, 9,000 RPM. - Horizontal and vertical adjustment manually with mechanical digital display - Pneumatic activation control - Manual swivel 90 ICOS open - PC-based control system with integrated PLC and electronic path control. - User-friendly interface with Windows standards - Simple, component-oriented

Condition: used, Year of construction: 2010, - Application of release agent, top/bottom - Joint milling unit - Gluing unit - Trimming unit - Copy milling unit SKF-L - Profile trimming blade unit - Spray cleaning agent - Self-adjusting trimming blade unit - Buffing unit Single-sided edge banding machine Manufacturer: IMA Type: Advantage 310 Year of construction: 2010 Technical data Workpiece - Workpiece length: min. 150 mm - Workpiece width: min. 65* / 150 mm *at a max. workpiece thickness of 25 mm - Workpiece thickness: min. 8 mm, 12 mm with profile trimming blades max. 40 mm (with MFA 08.346), 60 mm (with SKF) - Smallest workpiece: 65 x 300 / 150 x 150 x 19 mm - Machining allowance per workpiece edge: 0 - 5 mm (observe max. chip cross-section) - Workpiece shape: right-angled - Material: chipboard, MDF - Surface material: direct coating (melamine resin paper), paper, film, veneer Edge material - Roll material without film: Paper edges & plastic edges: 0.3 - 3.0 mm Veneer edges: 0.5 - 3.0 mm - max. edge cross-section: 150 - 180 mm² - Cut edge strips: Strips: 3.0 - 8.0 mm - max. strip cross-section: 520 mm² - Edge height: min. 12 mm, max. 65 mm - max. upper edge overhang: 2 mm - Edge profiles Paper edge: approx. 0.4 mm, chamfer 15 Plastic edge up to 3.0 mm, radius depending on the tool Strip up to 8 mm flush milling (with interchangeable motor on MFA) Machine - Constant workpiece projection from the chain track: 35 mm + edge thickness - max. trimming cross-section 520 mm² - Throughput width: min. 65 mm (with projection of 35 mm) - min. workpiece length in feed direction: 150 mm - Overall height (top edge of chain track): 940 mm - Unit side: on the left in feed direction - Pneumatic connection: approx. 7 - 8 bar Application of release agent, top/bottom Joint milling unit 08.379 and blowing nozzle - with 2 motors, each 4 kW, 9000 RPM, 150 Hz Gluing unit 283.1513 with oil bath gearbox - Adhesive output 0.8 l, 60 mm high, with quick-lock system - can be used for hot melt adhesive or PU adhesive - with single roll / strip magazine, roll diameter 800 mm - with 3 main pressure rollers and 3 counter pressure rollers Trimming unit 08.415 - pneumatically swiveling to 0 or 8 degrees - with 2 motors 660 kW, 400 V, 200 Hz, 12000 RPM - 2 HM trimming saw blades 160 x 3.5 x 22, Z=36 Ledpjzuyp Esfx Apmshk Copy milling unit SKF-L - with 2 motors 180 W, 400 V, 200 Hz, 12000 RPM - and 2 motors 400 W, 400 V, 200 Hz, 12000 RPM - 1 set of DP profile milling cutter I 80x12xHSK25-R, Z = 4, with HSK25 shank - Profile length in the feed direction: max. approx. 50 mm - Workpiece thickness: max. 60 mm - Working speed: max. approx. 20 m/min - Distance between 2 workpieces: min. approx. 400 mm - min. workpiece projection = 35 mm + profile depth Profile trimming blade unit 08.519 - For finishing a top and bottom milled quarter-circle profile Spray cleaning agent Self-adjusting trimming blade unit 08.521 - for removing hot melt adhesive residue from the edge area of the top and bottom of the workpiece Buffing unit 08.617-2 - with an upper and lower motor: 180 W, 50 Hz, 1400 RPM - 2 polishing pads 50 x 160 x 19 mm

Condition: used, Year of construction: 2010, 1. Edge banding machine Manufacturer: Homag Type: KAL 210 Ambition 2264 Year of manufacture: 2010 Technical data Release agent spraying system Joint milling unit (2 x 4 kW) Glue application A20 (granule/quick-melt system) Lodpfx Aozuyilspmohk Pressure zone with driven pressure rollers Miter saw HL84 (2 motors) Flush-/radius-/chamfer milling unit BF10/BF20 Corner copying unit FK11 (2 motors) Profile drawing blade PN10 Straight drawing blade for glue joint Buffing unit (polishing) Release agent and cleaning agent spraying system at the outfeed Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2010, - Equipped with ISAS 28-position edge magazine - PU gluing unit - With Boomerang return system Single-sided edge banding machine Manufacturer: Homag Type: KAL 310/7/A3 Year of manufacture: 2010 Technical data Lhodpfxszuyhho Apmjk - Equipped with ISAS 28-position edge magazine - PU gluing unit - With Boomerang return system Edge trimming unit with 2 motors, each 3KW, 150 Hz, 9,000 RPM. Pneumatically controlled for pre-trimming PU gluing unit 34 with PU hot melt unit - capacity max. 6 kg/h Container size 2 kg. QA glue application unit Selectable edges from the ISAS 28-position edge magazine 4 pressure rollers Release agent spray unit, top and bottom Trimming unit WK 13, bevel / straight With 2 motors, each 0.4 KW, 200 Hz, 12,000 RPM. Electropneumatic adjustment of the trimming motors to 2 positions (flush trimming and with overhang) Pre-trimming unit with 2 motors, each 0.55 KW, 200 Hz, 12,000 RPM. With double-roller scanning. With electropneumatic adjustment Shaping trimming unit FK 11 - manual For processing the edge overhangs on the top and bottom edges of the workpiece, as well as for milling the front and rear edges With 2 motors, each 0.4 KW, 200 Hz, 12,000 RPM. Universal trimming unit UF 11 With motor 4 KW, 150 Hz, 9,000 RPM. Swiveling 90°, electropneumatically controlled With HSK 63 F collet for unlocking by push-button Profile scraping unit PN 10 Pneumatic adjustment for moving sideways out of the working area Finishing unit FA11 top/bottom Consisting of: Glue joint scraping blade Cleaning agent application Buffing unit with 2 motors, height adjustment with the upper pressure Machine control via 19-inch touchscreen Return system BOOMERANG ZHR05 With air cushion table, angled, length 2,000 mm, width 1,000 mm Conveyor belt width 1,100 mm Workpiece parameters: Length 300 - 2,500 mm / Width: 60 - 1,100 mm or Length 300 - 800 mm / Width: 1,100 - 2,000 mm Thickness 8 - 60 mm For 4-sided processing: Min. part size: 300 x 300 mm / max. part size 2,000 x 800 mm With roller strip for supporting wider parts.

Condition: used, Technical specifications: - X = 3,060 mm - Y = 1,320 mm - Z = 150 mm - Central automatic lubrication system - 6 ATS workpiece supports - 18 bearing consoles - Vacuum system with division into 2 working areas in the X-direction - Pneumatic system for console adjustment - 2 independent working areas in the X-direction - 4 workpiece supports - 12 clamping devices for clamping narrow workpieces - Conveyor belt for removing chips and cutting waste - Vacuum pump, 90 m³/h - 12 kW electric spindle with ISO 30 tool holder, air-cooled - The machine is additionally equipped with an integrated rotary unit that is integrated into the machine control system and functions as a 5th axis for drilling operations at different angles. - Tool changer with 10 tool positions - Manual laser barcode scanner Drilling unit BH 21L Ledpfx Aszutqvspmshk - 7 + 7 vertical drilling spindles - 6 horizontal drilling spindles (4 in the X-direction, 2 in the Y-direction) - 1 grooving unit (saw blade) in the X-direction

Condition: new, Year of construction: 2024, functionality: fully functional, Dear customers, For prompt and reliable processing of your request, we kindly ask you to contact us preferably via email. This will allow us to directly assign your request to the appropriate contact person, collect all information and documents completely, and process your request as quickly as possible. We look forward to hearing from you and will be happy to assist you! Extraction table without back wall/side walls Technical data: Work surface: 2,000 x 1,000 mm Working height: 850-950 mm (manual adjustment) Width: 2250 mm (including power strip) Power strip with tool storage: 2x 230 V socket with flip-open cover, 2x compressed air couplings, power cable and main switch Ledpfx Apsuzf Ihomohk Extraction nozzle Ø 160 mm, with flange

Condition: used, Year of construction: 2010, Overview This PET filling line was manufactured between 1996 - 2019 by several European manufacturer. The line is designed for carbonated beverages such as lemonades and also suitable for water with or without CO₂. With an output capacity of 14.000 bph, it offers a complete solution from bottle blowing to palletizing. This equipment is in good condition and still fully operational.   Technical Data - Capacity: 14.000 bph - Filling product: carbonated water and soft drinks - Packaging formats: shrink wrapping without tray - Pallet: Euro pallet (1.200 x 800 mm)  Lhedpfx Apoyb Tuiomjk - condition: good technical condition, still in production Scope of Delivery Blow moulding machine | Sidel | SBO10 | 2010 Elevator preform | Sidel | 2010                                                                                                                    Air conveyors | Sidel-Alsim | 1999 Rinsing/Filling/Capping | Sidel-Alsim | 48/60/10 | 1999                                                                                           Mixer | Sidel-Alsim | 1999 Bottle dryer | ACI | 2015 Shrink wrapping machine | Acmi | 2019 Handle applictaor | SMI-Pack | 2002 Conveyors for bottles and trays | Sidel-Alsim | 1999 Palletizer | Alsim | 1996                                                                                                                                                Pallet wrapper | PM Pragometal #1 | 2009 Pallet wrapper | PM Pragometal #2 | 2009

Condition: used, Year of construction: 2010, This 22 series WWB 1050 Timesavers is suitable for dry finishing and deburring of metal. It is in excellent condition and was only used for 377 hours. Ready for immediate purchase and delivery. Applications and benefits of this machine: A total of three attachments can be used with the machine for different applications. Removal of vertical burrs from punched, laser and waterjet cut parts. Stainless steel, steel, aluminium, copper, etc. Deburring and surface finishing in one pass when using multiple aggregates. Edge breaking by means of cylindrical nylon brushes (B), flap brushes (B) or small brushes (MD). Finishing grinding/brushing. Very low operating costs and high production capacity. Standard version: Table mounted on 4 synchronous spindles. Digital thickness adjustment and display in mm. Frequency-controlled transport motor, 2.5 - 14 m/min and 0.7 - 7 m/min for WBB. Automatic table height adjustment 1 - 125 mm. Electronic oscillation. Dust extraction hoods and connections on top. CE-certified. Please Note: The information was obtained to the best of our abilities and - where possible - from the manufacturers. It is given in good faith, however, its accuracy cannot be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling must be requested before purchasing because in most cases the offered machines are still in production when the pictures were taken. We advise you to check any vital details! Sanding belt length: 1900 mm Table opening: 1 - 125 mm Contact roller diameter: 150, 200 mm Machine height: 2155 mm Lhedpfewfql Iox Apmek Machine length: 1860 mm Machine width: 1050 mm Number of aggregates: 1 - 3 Aggregate types: roller, brush, multi-disc, hammerhead Transport speed: 0.7 - 7 and 2.5 - 14 m/min

Condition: excellent (used), Year of construction: 2010, Clamping force: 110 t Tie bar distance: 470x420 mm Min Mould height: 275 mm Max Mould height: 775 mm Platen size : 680x663mm Screw diameter: 22 mm Shot volume: 41 cm3 Opening force: 55 kN Opening path: 500 mm Correct injection pressure: 2864 bar Nozzle pressure: 47 kN Path of the pant : 250 mm Forward ejector force: 41,2 kN Reverse: 26,4 kN Max. mold weight : 1000 kg min. tool diameter: 315 mm Working hours: 70.000 h Type: Horizontal Drive: Hydraulic Unilog B6 controll Air Valve Core puller Euromap 67 Ljdpfx Aju Ekaqjpmehk

Condition: excellent (used), Year of construction: 2010, clamping force: 600 kN, Equipment: documentation/manual, Clamping force: 60 t Screw diameter: 20 mm Distance between tie bars V: 370 mm Distance between tie bars H: 370 mm Type: Horizontal Drive: Hydraulic Engine hours : 60,700 h Hydraulic circuits : 1 x Hot runners : 6 x Robot interface : NO Lodpfx Apszn I H Esmjhk

Year of construction: 2010, condition: used, HB THERM 140 Z 2 (2010) 16KW Measurement range 0–400 °C Resolution 0.1 °C Regulation accuracy ±0.1 K Tolerance ±0.8 K Flow measurement Measuring range 0.4–40 l/min Resolution 0.1 l/min Regulation accuracy ±0.1 l/min Tolerance ±(5% of measured value + 0.1 L/min) Pressure measurement Value Unit Measuring range 0–20 bar Resolution 0.1 bar Tolerance ±5% of final value Technical data O8360-CS 2023-08 25 3.2 Emission value unit Permanent sound pressure level 55 °C 3.3 Operating conditions Lhodpfx Ajv H Ad Hjpmjk Temperature range 5–40 °C Relative humidity* 35–85 % RH Minimum free space (→ picture) A 10 mm B 50 mm C 150 mm D 50 mm E 70 mm

Year of construction: 2017, condition: ready for operation (used), A combined hot riveting and forming system for plastic components is available. Power: 38kW, Control: PLC, Weight: approx. 1850kg. Documentation available. An on-site inspection is possible. Lhedpfxjzfp H Ij Apmek