Used T-Nuts M5 30 Pieces for sale (88,531)

Condition: good (used), T-nut, screws, grub screws, for Bosch profile, construction profile, aluminum profile, aluminum T-slot profile Lhjdpfx Asymb Axjbzsl -T-nuts: 22 x 12 mm slot 8, with spring ball, 30 pieces -Thread: M5 -Groove width: 8 mm -Dimensions: 22 x 12 mm, see photos -Price/Quantity: 30 pieces -Price: 8 euros net for 30 pieces -Number: 9690 pieces in total -Transport dimensions: 600/400/H200 mm -Weight: 101 kg

Condition: excellent (used), Year of construction: 2011, Winmax control Travel paths X/Y/Z: 760 x 510 x 610 mm Table clamping surface: 1020 x 510 mm Spindle speed: 12,000 min-1 Lodpfxjzwhk Nj Abzohl Tool magazine for 24 tools, SK 40 Through-spindle coolant 20 bar

Year of construction: 1985, condition: used, Drilling process: single-lip gundrilling, operating method: rotating tool, number of working spindles: 1, nominal drilling depth: approx. 750mm, drilling range for solid drilling in steel: approx. 30mm, drilling range for counterboring in steel: approx. 40mm, spindle drive: 11kW, max. spindle speed range I: 1800rpm, max. spindle speed range II: 5700rpm, max. feed rate range I: 320mm/min, max. feed rate range II: 160mm/min, rapid traverse: 3.5m/min, clamping table X/Y: 420mm/1280mm, cross-slide table manually operated, max. transverse travel: 400mm, table clamping surface X/Y: 600mm/600mm, high-pressure coolant system for deep-hole drilling oil with 1000l coolant tank, flow rate: approx. 2-94l/min, max. pressure at max. flow rate: 45bar, pump power: 11kW, separate control cabinet. The machine underwent an extensive partial overhaul in 2018, during which the machine was disassembled and cleaned, all guideways and support surfaces were ground and partially scraped, motors were inspected and fitted with new bearings, the drilling spindle was fitted with new bearings, the ball screw incl. nut was replaced, the pump motor was overhauled, the wiper set was replaced, and the machine was repainted and all functions were checked and rectified. Including extensive accessories. Documentation available. Inspection possible by arrangement. Ledpjzu Szyjfx Abzohl

Condition: used, Year of construction: 2007, Used Golfetto Sangatie Stone Catcher Multiple units available Lhodsxft Ddepfx Abzel Drive 2x 3kW Used for destoning wheat Measurements in attached file Gravity Selector Dryostoner

Condition: good (used), Year of construction: 2012, HAAS ST-30 CNC lathe with C-axis and driven tools Year: 2012 Technical details: Swing diameter 806mm, Maximum cutting diameter 533mm, Distance between centres 762 mm Ljdpfx Abjzz Agtezshl Maximum cutting length 660 mm Bar capacity 76 mm Spindle Motor 22,4 kW Max spindle speed 3400 rpm C-axis and driven tools Turret 12 positions Tailstock Accessories/options: 1 axial driven tool holder 1 radial driven tool holder 10 pieces static tool holders Tool presetter, Renishaw Foot pedal for chuck and tailstock operating Coolant tank Swarf conveyor Under power in our warehouse.

Year of construction: 2004, condition: excellent (used), Twin-screw extruder Rollepaal T-REX 2-90-30 Application PVC PIPE The extruder is in very good condition and ready for operation. Ledpfx Abexcp T Nezehl Location: Germany:D-26345 Bockhorn-Grabstede, Bahnhofstr 6 The extruder is my property

Condition: good (used), Screws, grub screws, for Bosch profile, construction profile, aluminum profile, aluminum T-slot profile, T-nut - Grub screws: Hex socket set screws with pin, 30 pieces -Thread: M12 left -Price/Quantity: 30 pieces -Price: 6 euros net for 30 pieces -Number: 4000 pieces in total Lhedpoymbixsfx Abzel -Transport dimensions: 600/400/H200 mm -Weight: 58 kg

Condition: used, Year of construction: 2010, Milling machines Travel distance X: 760 mm Travel distance Y :510 mm Travel distance Z: 610 mm HSC-machines Number of axis: 3 Lodpjv D U Apsfx Abzohl milling machine / machining center Control: Hurco WinMax spindle chuck: SK - A40 spindle revolutions: 12000 rpm table size X: 1020 mm table size Y: 508 mm max. workpiece weight: 1350 kg tool changer: 24 - time input Power : 13,5 kW Torque: 214 Nm Rapid traverse: 35 m/min spindle cooling chip conveyor

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1992, operating hours: 5,216 h, load capacity: 3,000 kg, lifting height: 3,270 mm, fuel type: gas, mast type: telescopic, construction height: 2,160 mm, motor manufacturer: Nissan, fork length: 1,200 mm, tire condition: 40 %, front tire type: superelastic tires (black), front tire size: 23x9-15, rear tire type: superelastic tires (black), rear tire size: 6.50 - 10, overall weight: 4,220 kg, total height: 2,160 mm, total length: 2,800 mm, total width: 1,250 mm, fuel: liquid petroleum gas (LPG), Equipment: sideshift, KOMATSU FG 30 T -11E – LPG forklifts TECHNICAL DATA Lifting capacity: 3.000 kg Lhedpfx Aoz Aqqcjbzsl Lifting height: 3.270 mm Closed height: 2.160 mm Mast: Standard (2W327) Fork length: 1.200 mm Fork carriage: 3 A Drive: 4-Zyl. Treibgas Engine: Nissan Tyres: Superelastik SE 23x9-15 (40%) / 6.50 - 10 (30%) Service weight: 4.220 kg Length: 2.800 mm Width: 1.250 mm Year of manufacture: 1992 Operating hours: 5.216 h Condition: working condition EQUIPMENT 3rd valve, Front work lights, Overhead guard cover, Front windscreen, Load backrest ATTACHMENTS Load backrest, Sideshift Internal no.: 1202056 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Year of construction: 2023, condition: new, pressure 30 t throat 180 mm Lhedpfep Uduhjx Abzsl stroke 8-76 mm no. of strokes 80-200 Hub/min ram - range of adjustment 60 mm table surface area 360x580 mm table height 840 mm hole in the table Ø 110 mm ram surface 250x350 mm tool hole in ram Ø 40 mm total power requirement 3 kW weight of the machine ca. 1,8 t dimensions of the machine ca. BxTxH 1350x1200x2100 mm

Condition: ready for operation (used), Year of construction: 2011, operating hours: 37,463 h, functionality: fully functional, machine/vehicle number: M34216027081EHC, travel distance X-axis: 750 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: Hurco Winmax, spindle speed (max.): 15,000 rpm, TECHNICAL DETAILS X-axis travel: 750 mm Y-axis travel: 510 mm Z-axis travel: 510 mm Table width: 1,000 mm Table length: 510 mm Max. spindle speed: 15,000 rpm Max. table load: 1,350 kg Number of tool changer positions: 24 MACHINE DETAILS Lhjdpfxjy R Rn Hs Abzol Control model: Hurco Winmax Tool holder: SK 40 Dimensions & Weight Installation dimensions (W x D x H): approx. 2.80 m x 2.30 m x 2.75 m Transport weight: approx. 4,700 kg EQUIPMENT 4th CNC rotary axis Chip conveyor Coolant unit

Condition: ready for operation (used), Eloma Backermaster EB 30 XL T convection oven. 5 piece Eloma ovens for sale. The price is for one piece. Ready to use. Located Locally in Hungary (EU), Vácegres. Lodpfjyldaksx Abzohl

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, operating hours: 83,800 h, Equipment: CE marking, LVD STRIPPIT GLOBAL 30 1225 turret press The machine is in very good technical condition and was used by Alsanit. It has been regularly serviced exclusively by the manufacturer's service department. Only new and original spare parts are used during service. The turret press is currently in continuous production use. If you are interested, we encourage you to schedule a visit to confirm the technical condition and technological capabilities of the machine. General data: Location: Alsanit Sp. z o.o., ul. Wieleńska 2, 64-980 Trzcianka, Poland Province: Wielkopolskie Year of manufacture of the turret press: 2006 Date of purchase and installation of the machine: June 2019 Machine operating hours: 83584 cycles Maximum pressing force: 300 kN (30 tons) Maximum sheet thickness: 6.4 mm Turret system type: Thick Turret Control unit: CNC: GE FANUC 180 IP Maximum travel in the X-axis: 2,576 mm Maximum travel in the Y-axis: 1,337 mm Maximum table load (uniform): 145.6 kg Simultaneous speeds: 110 m/min Number of strokes per minute (punch diameter 25 mm): ±2% 400 min-1 Number of strokes per minute (nibbling function - 2 mm): 1000 min-1 Number of strokes per minute (marking/0.5 mm): 1700 min-1 Maximum slide speed in the X-axis: 83 m/min Maximum slide speed in the Y-axis: 73 m/min Number of tool stations in the turret: 30 pcs Station A – max. diameter 12.7 mm: 8 pcs Station B – max. diameter 31.7 mm: 16 pcs Lhsdpfx Aozxzagjbzsl Station C – max. diameter 50.8 mm: 2 pcs Station D – max. diameter 88.9 mm: 4 pcs Number of indexed (rotary) stations in the turret: 4 pcs (stations D) Note: Each station D can accommodate a multi-tool (1 multi-tool contains 3 to 8 tools), which increases the number of tools from 12 to 32 pcs. Machine height: 2,325 mm Machine length: 5,584 mm Machine width: 5,160 mm Machine weight: 13,750 kg Sheet size: 1250 x 2500 mm Number of sheet clamps (individually programmable): 3 pcs Tilting scrap collector for cut parts: 450 x 500 mm Brush table protecting against scratching the sheets CE certificate Electrical power supply: 380/415 Volt, 35.5 kVA, 63 A, cable cross-section (3+1)x16 mm2 Additional equipment: Scrap conveyor; Brush table MACHINE SPECIFICATION The machine is constructed as a closed bridge frame. The rigid construction ensures stability, reduces noise, vibrations, and oscillations during operation, which in turn has a positive effect on the long service life of both the tools and the machine. The sheet clamps are controlled by a foot switch, and the pin that extends from the table for positioning allows the operator's hands to remain free for proper placement of the sheet on the table. The turret drum of the LVD Strippit Global 30 punch press is made as a cast monoblock, mounted in the machine structure and supported by high-quality and precise bearings. In addition, inside the turret drum, in each tool station, there are hardened and improved sleeves, which can be easily replaced if necessary. The servo drive of the turret ensures precise bidirectional rotation of the turret and the indexing stations (which are locked by a ball head pin after reaching the required angular position, and the accurate linearity and perpendicularity are ensured by tapered, hardened sleeves).

Condition: used, functionality: fully functional, Year of construction: 2006, operating hours: 13,137 h, load capacity: 3,000 kg, lifting height: 6,455 mm, free lift: 2,074 mm, fuel type: gas, mast type: triplex, construction height: 2,841 mm, fork carriage width: 1,150 mm, fork length: 1,200 mm, drive type: Treibgas, Internal combustion engine forklift Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Lodpfx Asz Ecvgobzshl Transmission: Hydrostatic / 2-pedal Condition: Ready for use and fully functional Technical condition: good Front tire type: Superelastic Front tire size: 7.00-12 Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire size: 23x9-10 Rear tire condition: 80 - 100% Description: Delivery includes a new FEM 4.004 inspection certificate. If you have any further questions, please call us. In addition to this model, we have approximately 150 other material handling vehicles in stock. Visit our website for leasing and financing options. We would be happy to provide you with a quote for delivery at favorable conditions. Trade-in of Linde equipment is also possible, even if you do not purchase a device from us. The stated operating hours were recorded at the time the listing was created. Subject to prior sale, changes and errors. Side shifter, pre-installed side shifter 3rd valve, 4th valve, rear work light, front work light, heater, full cabin, full free lift, safety light, seat heating.

Condition: excellent (used), Year of construction: 2006, LWB STEINL VCRS-T 300/36 T / Machine like new Year of construction: 2006 Injection unit: Metering volume: 36 ccm Clamping unit : clamping force: 30 t Ejector: hydraulic Clamping unit: hydraulic Control system: LWB ECO Additional equipment: Hydraulic core pull x 1 Control unit with air valve The injection unit is made of bimetal Dimensions: Weight: 3000 kg Lhjdezy H N Nopfx Abzol All offered machines are started by our service technicians before sale. It is possible to obtain a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: On request

Condition: used, Bolts, hex bolts, flange nuts, hex nuts, collar nuts -Hexagon nuts: M 20 flange nuts with locking teeth 3650 pieces -Type: DIN 6923-8 A2L M20 SERR -Price: complete Lsdpfx Aoirnwfebzohl -Total weight: 355 kg

Condition: new, Year of construction: 2024, pressure 30 t throat 180 mm stroke 8-76 mm no. of strokes 80-200 Hub/min ram - range of adjustment 60 mm table surface area 360x580 mm table height 840 mm Lhsdpfx Ajvfhpxebzel hole in the table Ø 110 mm ram surface 250x350 mm tool hole in ram Ø 40 mm total power requirement 3 kW weight of the machine ca. 1,8 t dimensions of the machine ca. BxTxH 1350x1200x2100 mm

Condition: new, Year of construction: 2024, pressure 30 t throat 180 mm stroke 8-76 mm no. of strokes 80-200 Hub/min ram - range of adjustment 60 mm table surface area 360x580 mm Lodpfx Ajvfhqvebzshl table height 840 mm hole in the table Ø 110 mm ram surface 250x350 mm tool hole in ram Ø 40 mm total power requirement 3 kW weight of the machine ca. 1,8 t dimensions of the machine ca. BxTxH 1350x1200x2100 mm

Condition: new, Year of construction: 2024, pressure 30 t throat 180 mm stroke 8-76 mm no. of strokes 80-200 Hub/min Lhjdpfxjvfhq As Abzol ram - range of adjustment 60 mm table surface area 360x580 mm table height 840 mm hole in the table Ø 110 mm ram surface 250x350 mm tool hole in ram Ø 40 mm total power requirement 3 kW weight of the machine ca. 1,8 t dimensions of the machine ca. BxTxH 1350x1200x2100 mm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2015, operating hours: 11,043 h, load capacity: 3,000 kg, lifting height: 6,450 mm, free lift: 1,800 mm, fuel type: gas, mast type: triplex, construction height: 2,600 mm, motor manufacturer: VW, fork length: 1,200 mm, tire condition: 20 %, front tire type: superelastic tires (black), front tire size: 27 x 10 - 12, rear tire type: superelastic tires (black), rear tire size: 23 x 9 - 10, overall weight: 4,955 kg, total height: 2,600 mm, total length: 2,850 mm, total width: 1,250 mm, fuel: liquid petroleum gas (LPG), Equipment: cabin, sideshift, LINDE H 30 T -02 – LPG forklifts TECHNICAL DATA Lifting capacity: 3.000 kg Lifting height: 6.450 mm Closed height: 2.600 mm Free lift: 1.800 mm Mast: Triplex (3F645) Lhedez Ap Nwspfx Abzsl Fork length: 1.200 mm Fork carriage: FEM 3 A Drive: 4-Zyl. Treibgas Engine: VW Tyres: Superelastik SE 27 x 10 - 12 (20%) / 23 x 9 - 10 (60%) Service weight: 4.955 kg Length: 2.850 mm Width: 1.250 mm Year of manufacture: 2015 Operating hours: 11.043 h Condition: working condition EQUIPMENT 3rd valve, 4th valve, Rear work lights, Front work lights, Heating, Full cabin ATTACHMENTS Double clamp, Sideshift, Double pallet clamp Internal no.: 1202070 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: used, Year of construction: 2007, machine/vehicle number: 001669, Lg 33121 Single-sided unwinding reel ARKU AH 3000/ST-M Year of manufacture: 1995 Maximum strip width: 600 mm Maximum load capacity: 3,000 kg Maximum coil outer diameter: 1,800 mm Spreader: hydraulically operated Presser arm: hydraulically operated Take-up reel with auxiliary drive and brake Lsdehigmbjpfx Abzjhl Coil loading table, fixed + reel traversing device including: Lg 33221 High-performance strip straightening machine LORENZ BRM 50/620.9 Year of manufacture: 2007 Machine no. 001669 Maximum pass width: 620 mm Number of straightening rollers: 9 Straightening roller diameter: 50 mm Material thickness: 0.7 to 6.0 mm Straightening rollers are multiply supported to prevent deflection. Drive for all rollers via a distributor gearbox and universal joints. Used, as is, ex warehouse, immediately available. Overhaul possible upon request. Delivery time upon agreement. Further data will be available shortly or upon request.

Year of construction: 1990, condition: excellent (used), O F F E R Subject to prior sale and errors excepted, we can offer you, without obligation, the following ex-stock: D E G E N Manual Cutting, Pointing, and Cylindrical Grinding Machine for Ejector Pins Model: T Year of manufacture: 1990 _____ Grinding carriage center height: approx. 200 mm Grinding wheel Ø x bore: 200 x 30 mm Grinding wheel speed: approx. rpm Grinding wheel drive power: approx. kW Workpiece headstock center height: 160 mm Workpiece headstock longitudinal adjustment: approx. 100 mm Workpiece headstock transverse adjustment: approx. 200 mm Workpiece headstock swiveling either side: approx. 2 x 30° Collet chuck capacity: 0.5 – 20 mm Weight: approx. 500 kg Accessories / Special equipment: • Workpiece headstock swiveling for pointing and deburring • Collet chuck with approx. 10 different collets • Plexiglass safety guard for grinding wheel • Compact, free-standing on sturdy base • Optional cross-slide feed unit Ledexzuuvspfx Abzohl Condition: good to very good – under power, ready for demonstration Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to receiving your order. Further tool grinding machines available from stock – please enquire!

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, operating hours: 3,366 h, load capacity: 3,000 kg, lifting height: 4,900 mm, fuel type: gas, mast type: telescopic, construction height: 3,150 mm, motor manufacturer: VW, fork length: 1,196 mm, tire condition: 80 %, front tire type: superelastic tires (black), front tire size: 27 x 10 - 12, rear tire type: superelastic tires (black), rear tire size: 225/75 - 10, overall weight: 4,575 kg, total height: 3,150 mm, total length: 2,700 mm, total width: 1,300 mm, fuel: liquid petroleum gas (LPG), LINDE H 30 T - 02 – LPG forklifts Lhsdpfx Asz Aqryebzel TECHNICAL DATA Lifting capacity: 3.000 kg Lifting height: 4.900 mm Closed height: 3.150 mm Mast: Standard (2W490) Fork length: 1.196 mm Fork carriage: 3A Drive: 4-Zyl. Treibgas Engine: VW Tyres: Superelastik SE 27 x 10 - 12 (80%) / 225/75 - 10 (25%) Service weight: 4.575 kg Length: 2.700 mm Width: 1.300 mm Year of manufacture: 2013 Operating hours: 3.366 h Condition: working condition EQUIPMENT 3rd valve, Rear work lights, Front work lights, Overhead guard cover Internal no.: 1202060 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Year of construction: 2010, condition: like new (used), functionality: fully functional, MFT 30/300S Set – Used Professional Equipment For sale, a professional set in excellent condition, ready for immediate use. The set includes: MFT 30/300S Big Bag FAS 300 with mobile suction unit This set provides a complete solution, ideal for professionals seeking high-performance, robust, and operational equipment for use in a workshop or on a construction site. Optional: Lhjdpfszncrpsx Abzel Rapid Vario 70 Primus available as an additional unit for an extra €2,600. The equipment has been carefully maintained, offering excellent value for money compared to new equipment. Sale as a set is preferred.

Condition: used, Year of construction: 1997, turning diameter / mm turning length / mm control / Technical Data – MAZAK QTN-30 Manufacturer: MAZAK / Yamazaki Mazak Type: QTN-30 Year of manufacture: 1997 Machine type: Horizontal CNC turning center Control system: MAZATROL T PLUS Number of axes: 2 Max. swing diameter: approx. 510 mm Max. machining diameter: approx. 310–320 mm Max. machining length: approx. 1,000 mm X-axis travel: approx. 200–201 mm Z-axis travel: approx. 1,010 mm Spindle speed: approx. 33–3,300 rpm Spindle bore: approx. 80 mm Spindle nose: A2-8 Spindle motor: approx. 22 kW Chuck: Hydraulic, approx. 250–300 mm Turret: 8-station / 16 tool positions, depending on configuration Ljdjzu Dazjpfx Abzohl Tool holder: approx. 25 × 25 mm Tailstock: Fully automatic, MT 5 Automatic tailstock: Included Chip conveyor: Included Coolant system: Included (depending on equipment) Machine weight: approx. 4,300–5,300 kg (depending on configuration) Dimensions: approx. 2,800 × 1,950 × 1,950 mm (depending on configuration) The specifications regarding the 1997 model year and the QTN-30—featuring MAZATROL T PLUS, Ø510 × 1,000 mm capacity, Ø80 mm spindle bore, 33–3,300 rpm speed range, and a 22 kW spindle motor—are confirmed by a specific QTN-30 offer from 1997. Subject to change and without guarantee – Technical data