Used T-Drill Tcc-25 for sale (80,294)

Year of construction: 2002, condition: used, functionality: fully functional, Machine for straight cutting of aluminium and copper tubes. Nedpfxsyt Spco Af Sslg

Condition: like new (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: G5-M030-13-2V-R10-15, total length: 7,200 mm, total height: 2,700 mm, input voltage: 400 V, total width: 2,700 mm, Technical Specifications Brand: Schraml Model: TopDRILL M-RX 130 Roto-10 Year: 2015 Direction of rotation: Right to left Condition: As is (Very good condition) Parameter Specification / Capacity - Machining height / Max. 1300 mm - Maximum glass height / Unlimited (Open-top model / open-top design) - Maximum glass length / 3200 mm - Glass size for drilling min. 600 x 210 mm - Glass size for milling min. 750 x 210 mm Njdpfx Asz A D H Ujf Sjlg - Maximum glass weight 150 kg - Glass thickness for drilling 4 - 40 mm - Glass thickness for milling 4 - 20 mm - Tool magazine (Roto) Automatic double revolver magazine 10 + 10 (front and rear), total 20 positions - Tool diameter Up to max. 80 mm - Tool connection 1/2" gas thread with length 75 mm - Spindle speed 0 - 12,000 rpm - Spindle cooling Water-cooled - Control & Software Schraml software with Siemens electrical components - Included accessories Automatic sharpening device for tools - Separate vacuum pump for glass fixing - Additional conveyor (1 meter) - Machine dimensions L 7200 mm x W 2700 mm x H 2700 mm - Machine weight 3800 kg - Electrical connection 3x400V + N + PE, 50/60Hz, total power: 25 kW Dismantling, loading and installation can be carried out on request by our service team.

Condition: excellent (used), Year of construction: 2013, 4mm Dia. - 16mm Dia Range of Drilling; Up to 3,000mm Length of Component; Double Axis; Overall Length Approx 11 Metres x 900mm Wide, (2) Sections - Headstock Bed Length Approx 5 Metres, Drilling Length Bed Approx 6 Metres; (1) 500mm Dia 4-Jaw Chuck, 120mm Bore with Troyke DL-20-B, 4th Axis, 500mm Dia. Precision Rotary Table; Pendant Control; Stand Alone Electrical Cabinet (Dimensions Approx 3,000mm x 500mm x 1,900mm High); Technidrill Coolant Filtration System consisting of LNS 'Turbo HB' Swarf Conveyor, FSI 'CBFP 11' Filter System & Oil Tank with High Pressure Delivery Pumps; Njdpfxsy Ey E Ro Af Solg Stand Alone Dimplex Koolant Koolers Chiller Unit with Controls (Dimensions Approx 700mm x 1,300mm x 1,850mm High, 2012);

Condition: like new (used), Year of construction: 2017, operating hours: 20 h, functionality: fully functional, power: 55 kW (74.78 HP), Vecoplan Shredding Unit – Efficient Processing of Wood Waste The Vecoplan shredding unit is a powerful complete solution for the continuous processing of wood waste, cut-offs, strips, boards, and other wood residues into high-quality wood chips. The coordinated components ensure a consistent material flow, reliable continuous operation, and high economic efficiency. Components of the system: Vecoplan VTH 65/25/5/U Industrial Shredder (year of construction 2017) The VTH 65/25/5/U is a robust industrial shredder for continuous use in the wood industry. With its inlet opening of 650 × 250 mm and a drive power of 55 kW, it reliably and energy-efficiently processes a wide variety of wood residues. Depending on the material properties, the machine achieves a throughput of 1 to 5 tons per hour. The VTH series is characterized by high throughput rates, a robust design, and low maintenance requirements. Vecoplan VR 65/24 Vibrating Table The vibrating table with a usable area of 650 × 2,500 mm ensures a uniform material distribution and continuous feeding of the shredder. This avoids peak loads, optimizes system performance, and ensures a smooth production process. Vecoplan KKF 500-1K-U Scraper Conveyor The downstream scraper conveyor with a conveying width of 500 mm reliably transports the shredded material for further processing or storage. It is ideal for transporting wood chips, sawdust, wood shavings, and pellets and impresses with its robust industrial design. Advantages of the system Complete, perfectly coordinated Vecoplan system Nlodpfx Afjzh Ti Es Seg Consistent material feed through vibrating table High throughput of up to 5 t/h Robust industrial design for continuous operation Low maintenance requirements Ideal for sawmills, wood processing companies, biomass plants, and pellet production Immediately ready for use for the economical processing of wood waste.

Condition: ready for operation (used), Year of construction: 2000, Column drilling machine MAXION / IXION BS 25 ST - G -Well-maintained, good overall condition -CE marking -Year of manufacture 2000 -Drilling capacity / steel 25mm -Threading device up to M20 -Spindle mount / Morse taper MK 3 -Drilling stroke / spindle stroke 120mm -Overhang 260mm -Speed range / continuously variable 120-2160 rpm -Automatic feed Nsdpfx Aoy Um Iwef Selg -Work table size 500x365mm -Column diameter 110mm -Distance / spindle - table 90-760mm -Drive power 1.5 KW -Drill chuck Dimensions: L x W x H 0.8 x 0.5 x 2 meters / Weight 300kg Errors and omissions excepted.

Condition: excellent (used), functionality: fully functional, strip width: max. 1.600 mm strip thickness: 0,4 - 3 mm Nlsdpfx Afey Nypkj Sjg No. of strips: max. 11 coil weight: max. 25 t coil OD: max. 2.000 mm mandrel Ø: 508/610 mm year: 1990/2002/2006/2016/2019

Year of construction: 2007, condition: ready for operation (used), Four metalworking machines are offered. 1) Cloos GLC 255 MIG/MAG welding machine, year of manufacture: 2004, dimensions X/Y/Z: approx. 980mm/450mm/700mm, weight: approx. 115kg. 2) Cloos GLC 353 MC3 MIG/MAG pulsed welding machine, year of manufacture: 2007, weight: approx. 160kg. 3) hebö Type II bar twister, year of manufacture: 1979. 4) Eisele VMS II PV-p circular saw, year of manufacture: 1974, weight: approx. 290kg. Inspection by prior arrangement is possible. Nledpfx Aozp Rhhsf Sog

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Nlodpfx Afoz Ebzno Sjg Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: used, Radial Drilling Machine BERGONZI type UT 25 Njdezw Ax Iopfx Af Sjlg Spindle: CM3 Spindle exit: 150 mm Spindle speed: from 130 to 900 RPM Arm travel: 500 mm Max height table/spindle nose: 900 mm Column: Ø 180 mm 2 speeds motor Auto descent Return Spring defective Electric arm rise Delivered with: 1 cube Length 500 mm x Depth 400 mm x Height 450 mm 1 false table Lubricant pump Voltage: 380 V Length: 1500 mm Width: 900 mm Total height in height position: 2300 mm Weight: approx 1,2 T

Condition: like new (used), Year of construction: 2018, operating hours: 5,000 h, functionality: fully functional, Machine type: CNC turning and milling center Manufacturer: DMG MORI Type: NLX2500SY/700 with Fanuc industrial robot, type R2000ic/165F Year of manufacture: 2018 Control system: M730 UM Mapps CELOS Country of origin: Japan Delivery time: upon agreement Njdpfxezcpkis Af Selg Incoterms: EXW Additional information: CNC turning and milling center DMG MORI NLX2500SY/700 Turning diameter max. 356 mm Turning length 705 mm Control system: M730 UM Mapps CELOS Swinging diameter over bed 920 mm Swinging diameter over cross slide 742 mm Spindle speed range - main spindle 4,000 rpm Drive power - main spindle 18.5 / 15 kW Spindle nose: JIS A2-8 Spindle bore 80 (91) mm C-axis: 0.001° Spindle speed range - counter spindle 6,000 rpm Drive power - counter spindle 11 / 7.5 kW Spindle bore 43 mm C-axis: 0.001° X-axis travel: 260 mm Z-axis travel: 795 mm Y-axis travel: +/- 50 mm Rapid traverse rate (X / Y / Z): 30 / 10 / 30 m/min Number of tool positions: 12 Shank height for square tools: 25 mm Shank diameter of drills: 50 mm Tool change time: 0.27 sec. Spindle speed range - driven tools max. 10,000 rpm Drive power - driven tools 5.5 / 4.2 kW Total power consumption: 41 kVA Machine weight: approx. 6.4 t - Counter spindle - Tool drive - C, Y-axis Subject to errors in technical data. The scope of the accessories is exclusive and limited to the description in the text. No claims can be made regarding additional accessories shown, e.g. for illustrative purposes.

Year of construction: 2008, condition: used, load capacity: 50 kg, plate length: 2,500 mm, plate width: 1,200 mm, stack height: 1,600 mm, TECHNICAL DETAILS Maximum panel width: 1,200 mm Maximum panel length: 2,500 mm Minimum panel width: 195 mm Minimum panel length: 250 mm Lifting capacity: 50 kg Operating performance: 18 cycles/min Maximum stack height from the ground: 1,600 mm MACHINE DETAILS Total installed power: 15 kW CE safety compliance: Yes EQUIPMENT Removal of the panel stack via powered roller conveyor Vacuum pump Nlsdpfx Aez Ekcnef Sjg WINDOWS control The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents, which are for descriptive purposes only. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8347

Condition: good (used), Table milling machine Martin T 25. Nlodpfxsy Srtme Af Sjg

Condition: new, bore capacity in steel (diameter) 25 mm bore stroke 120 mm MK 3 10 manuell 245 – 4.100 U/min manuell über Griffkreuz 300 x 270 mm 100 mm 250 mm 0,71 / 1,35 kW 0,23 t 700 x 500 x 1400 mm Nljdpen Ea Tzofx Af Seg Bench drilling machine with V-belt drive and moveable intermediate table Max. thread cutting capacity for steel (St 60) M 18 - V-belt drive with 5x stepped pulleys and quick-release device - 10 fixed speeds - manual feed via grip cross - Scale with adjustable drilling depth - automatic tool ejector - Movable intermediate table, fixed drill head - Machine base plate with machined workpiece support surface - integrated machine light - EMERGENCY STOP button - Right/left rotation switch - High/low speed switch - Chip protection device with microswitch monitoring - thermal magnetic motor protection - Switching electronics in the low-voltage range - Color signal gray (RAL 7004) and graphite black (RAL 9011) - CE conformity and marking - Documentation, operation and maintenance manual

Condition: used, Year of construction: 2023, turning diameter 380 mm turning length 1000 mm control Mazatrol SmoothG max. swing diameter over bed 695 mm Standard machining diameter 276 mm bar material dia. max. 80 mm x-axis 234 mm rapid traverse X-axis 30 m/min y-axis 100 mm rapid traverse Y-axis 21 m/min Nlodpozzd Rtefx Af Seg z-axis 1090 mm rapid traverse Z-axis 33 m/min w-axis 1050 mm rapid travel W 30 m/min turning speeds 35 - 4000 U/min spindle nose A2-8 spindle bore 91 mm Motor output (30-min. rating) 26/22 Max. Torque 465 (15% ED) Nm turning speeds 35 - 6000 U/min spindle nose A2-5 Motor output (25%ED) 11 Max. Torque 90 (15% ED) Nm Milling spindle speeds ( driven tools) 5000 1/min torque on milling spindle max: 47 Nm power capacity - milling spindle 5,5 (40% ED) kW Milling spindle power 3,7 kW Numbers of tools 12 (angetrieben) Tool cross section (outside) 25 qmm Boring bar- Ø 40 mm Drill- Ø 20 mm Mill- Ø 20 mm Tap- Ø M20 x 2,5 coolant tank 270 l Chuck diameter main spindle 10 '' Chuck diameter counter spindle 8 '' total power requirement 37 kW weight of the machine ca. 6,6 t dimensions of the machine ca. 3,6 x 2 x 1,9 m Machine in standard configuration, equipped with the following optional equipment: Air blast through the turret Automatic operator door – opening and closing Air blast system at the main spindle chuck Chip conveyor High-pressure coolant system, 15 bar Robot interface (ADVANCE / Ethernet/IP) C-axis on the sub-spindle, input resolution (contour/indexing): 0.0001° Additional push buttons on the CNC control panel Sub-spindle tailstock function Rectangular 3-colour LED signal light Preparation for oil mist extraction, mechanical flange only, Ø 98 mm Absolent 10C oil mist extraction system Preparation for bar feeder Overload monitoring system Drilling cycle with torque-dependent chip breaking Engraving function Thread re-cutting function All dimensions, weight and performance specifications are non-binding. Used machine – sold without warranty.

Condition: new, bore capacity in steel (diameter) 25.0 mm throat 180 mm bore stroke 80.0 mm morse taper 2 MK turning speeds 180 - 2270 U/min table-size 305 x 305 mm swivelling +/- 45 Grad T-slots 16.0 mm column diameter 72.0 mm Nsdpfx Aoxaa Thjf Sslg voltage 400 V total power requirement 1.10 kW weight 57.0 kg range L-W-H 400 x 630 x 990 mm scope of delivery - Keyless chuck 1 - 16 mm / B 18 - Drill chuck arbor MK 2 / B 18 - Digital quill stroke display - machine light - Right-left rotation - protective cover - Height-adjustable protective cover - T-nuts - operating tool

Condition: used, Year of construction: 2008, number of axes: 3, working width: 1,300 mm, working length: 3,200 mm, TECHNICAL DETAILS Nsdoz Ekchspfx Af Solg Working area, X-axis: 3,200 mm Working area, Y-axis: 1,300 mm Number of controlled axes: 3 Total number of drilling spindles: 36 Tool change stations: 10 MACHINE DETAILS Power of main electric spindle: 11 kW EQUIPMENT Type of machining: Drilling and milling The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents with a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7468

Condition: used, Year of construction: 1992, functionality: fully functional, power: 2,500 kW (3,399.05 HP), input voltage: 380 V, input current: 53 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 250 t, table length: 4,050 mm, year of last overhaul: 2007, Equipment: documentation/manual, We are offering this used Eisen u. Hammerwerk GmbH - EHT EHPS 25-40 press brake (hydraulic press brake, die bending press) for sale. Available immediately. Ready for operation. For sale due to new acquisition. Specifications: - 250 t pressing force - Cybelec DNC880S CNC control with Windows operating system (retrofitted in 2007) - Foot pedal control - Various upper tools in different lengths (segmented) - Lower tool (reversible die) in various lengths (segmented) - Hydraulic tool clamping - Support table for bent parts Technical data: - Machine type: EHPS 25-40 - Force: 2500 kN - Year of manufacture: 1992 - Working length: 4050 mm - Serial number: 207380 - Power supply: 3~ - Frequency: 50 Hz - Operating voltage: 380 V Nsdpfjy D Sy Rjx Af Solg - Control voltage: 24/220 V - Rated current: 53 A - Main fuse rated current: 80 A - Circuit diagram number: 209-178/372 If you have any questions or require more information, feel free to send us a message or give us a call. Machine location at our premises: Pavic Fahrzeugtechnik Homberg GmbH Poschweg 2 34576 Homberg Relbehausen Germany This is a non-binding offer. Subject to prior sale, errors and changes excepted.

Condition: used, Year of construction: 2005, feed rate X-axis: 60 m/min, plate length: 2,500 mm, plate width: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum plate width: 1,200 mm Maximum plate length: 2,500 mm Minimum plate width: 220 mm Minimum plate length: 250 mm Maximum feed rate: 60 m/min EQUIPMENT Nlodpfxjz Ekfcs Af Sjg 90° transfer conveyor CE safety compliance The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents, which are for descriptive purposes only. The buyer has the right to inspect the goods before collection and is responsible for the installation, securing, and use of the machine at the destination. External reference: 5981

Condition: ready for operation (used), Column drill press GILLARDON GB 25 Nlodpszdb H Sjfx Af Sog -Drilling capacity / steel 32 mm -Drilling capacity / cast iron 35 mm -Speed range - stepless 60 - 1800 rpm -Direction of rotation / right - left -Morse taper MK 3 -Overhang 290 mm -Quill travel 175 mm -Table area 450x360 mm -Table height adjustment by means of hand crank -Threading device -Coolant system -Drill chuck -Analog speed display -Foot switch -Emergency stop -Documentation Dimensions: L x W x H 0.7 x 0.7 x 2 meters / Weight: 490 kg Errors and omissions excepted.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 17405, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 10,000 kg, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 240, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 550 mm Travel range, Y-axis: 410 mm Travel range, Z-axis: 450 mm Travel range, B-axis: -110 to +110° Travel range, C-axis: 360° Distance, pallet surface to spindle center line: -20 to 430 mm Distance, B-axis center to spindle center line: -40 to 410 mm Distance, B-axis center to spindle center line: -20 mm Distance, pallet center to Z zero point: 265 mm Distance, pallet center to Y zero point: 180 mm Pallet Work area on the pallet: Ø 130 mm Pallet load capacity: 40 kg Max. workpiece size: Ø 250 × 250 mm Pallet mounting surface: 4 × M12 × 1.75 Distance, pallet bottom to pallet surface: 970 mm Pallet indexing, B/C-axis: 0.001° / 0.001° Pallet change time, B-axis: 1.2 s/90° Pallet change time, C-axis: 0.9 s/90° Pallet change time, C-axis: 1.2 s/180° Pallet change time, C-axis: 1.4 s/270° Pallet torque, B-axis: 1,070 Nm Pallet torque, C-axis: 192 Nm Pallet braking torque, B-axis: 1,112 Nm Pallet braking torque, C-axis: 500 Nm Spindle Spindle speed: 50 to 15,000 rpm Spindle speed change: 5-digit direct S-command Tool holder: SK 40 Spindle taper: 7/24, taper No. 40 Inner diameter of spindle bearing: 70 mm Max. spindle torque: 65.1 Nm at 1,100 min⁻¹ Spindle air blow: Standard Spindle alignment: Standard Tool clamping force: 7.0 kN Tool changer Tool magazine capacity: 240 positions Tool shank: JIS B 6339, tool shank 40T Pull stud type: JIS B 6339, pull stud 40P Max. tool diameter: 80 mm Max. tool diameter with free secondary stations: 150 mm Max. tool length: 300 mm Max. tool weight: 10 kg Tool selection: Fixed address system Tool change arm: W-gripper type Njdpsz D Taaefx Af Sslg Feed rates Rapid traverse, X/Y/Z-axis: 50 m/min Rapid traverse, B-axis: 30 min⁻¹ Rapid traverse, C-axis: 50 min⁻¹ Feed rate, X/Y/Z-axis: 1 to 50 m/min Feed rate, B-axis: 30 min⁻¹ Feed rate, C-axis: 50 min⁻¹ Rapid traverse acceleration, X/Y/Z-axis: 0.6 G Rapid traverse acceleration, B/C-axis: 2,500 / 2,000 °/s² Max. acceleration during cutting feed, X/Y/Z-axis: 0.4 G Max. acceleration during cutting feed, B/C-axis: 2,000 / 4,000 °/s² Dwell feed rate, X/Y/Z-axis: 0 to 4000 mm/min Dwell feed rate, B/C-axis: 0 to 11.11 min⁻¹ Min. motion increment, X/Y/Z-axis: 0.001 mm Min. motion increment, B/C-axis: 0.001° MACHINE DETAILS Control: MATSUURA G-TECH 840 DI Serial number: 350536 Electrical connection values Rated apparent power: 36 kVA Input voltage: 415 V Input frequency: 50 Hz Input current: 50 A Dimensions and weight Overall length: 6,000 mm Overall width: 5,000 mm Overall height: 3,500 mm Overall weight: 15,000 kg EQUIPMENT Chip conveyor Coolant system Tool holders in the tool changer External reference: Hanon - Lot 1

Condition: excellent (used), functionality: fully functional, Soraluce TR3 2500 radial drilling machine, drilling capacity in steel: 80mm, drilling capacity in cast iron: 100mm, boring capacity: 100mm, spindle diameter: 100mm, Morse taper: 5, quill stroke: 310mm, number of speeds: 12, ranging from 25 rpm to 1440 rpm, with slotted table or indexing head. Weight of the radial drilling machine: 11 tons + table or indexing head. Nledpfx Ajzbzy Hsf Seg

Condition: not inspected (used), Year of construction: 1997, operating hours: 145,298 h, functionality: unexamined, machine/vehicle number: 31378, total length: 6,500 mm, total width: 2,000 mm, total height: 2,200 mm, A used machine from a site closure is being sold. Sale is made excluding any warranty for defects. The machine has not been inspected but was in working order until the end. Weight approximately 9000 kg. Nodpfjzqabmsx Af Solg

Condition: excellent (used), Year of construction: 2021, Used HOMAG Drillteq V-200 - Year of manufacture: 2021 - Immediately available - Excellent condition - Tools can be included for an additional charge. Nsdpfszdvuvex Af Sjlg Please feel free to contact us if you have any questions.

Condition: used, Year of construction: 1992, bore capacity in steel (diameter) 32 mm throat 280 mm Nlsdpfez Dkzbjx Af Sjg bore stroke 145 mm taper MK 3 MK table-size 540 x 480 mm feeds 0,08 bis 0,32 mm/U turning speeds 180 - 2000 U/min total power requirement 3,0 KW weight of the machine ca. 0,9 t dimensions 1,2 x 0,8 x 2,4 m Column drilling machine with: - Power feed - Thread-cutting attachment - Coolant pump - Machine light - Incl. machine vice - Emergency stop device

Year of construction: 2016, condition: excellent (used), functionality: fully functional, Used Blue Mac 2510 Static Trommel Year 2016 Nodpfx Afozzrwbj Sjlg 10 M Long x 2.5 M Diameter 50mm Round Holes, 8mm Thick All New Drive Shafts & Wheels 4 x 5.5kW Electric Motors / Bonfiglioli Gearboxes 21 Tonne Weight Excellent Condition Ready To Go To Work