Used Synventive Ø32 X 265 Mm for sale (95,623)

Condition: good (used), Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape -Manufacturer: Erge, heating tape heating sleeve -Type: Ø32 x 265 mm, see photos -Item no.: 832 597 65 -Heating power: W Kdedpfx Ahjlw Azbebeu -Voltage: V -Number: 2x heating tape available -Price per piece -Dimensions: 270/140/H50 mm -Weight: 1.1 kg/pc.

Condition: good (used), functionality: fully functional, Year of construction: 2002, Motorized Swivel Bending Machine Manufacturer: Schröder, Type: MPB 3200/2mm Year of manufacture: 2002 Technical data Manufacturer: Schröder Type: MPB 3200/2.0 Year of manufacture: 2002 Usable length: 3200 mm Sheet thickness: 2.0 mm Rated power: 8.0 kVA Dimensions: L 4.60 x W 2.40 x H 1.60 m Weight: 3.8 t Equipment - POS 2000 touch screen control, updated with a USB drive - Controlled back stop, length 1,000 mm with ball bearing support table - Rotatable upper beam as an automatic tool changing system - Motorized bending beam adjustment - Automatic bending beam adjustment Kdsdpfx As Aa Um Hehbeu - Goat foot rail H 130 mm, segmented, with corner pieces - Sharp edge rail - Bending rails: 10mm, 15mm, 25mm - Foot switch - Documentation All information without guarantee. A demonstration is possible at any time in our showroom.

Condition: used, Year of construction: 1983, Hydraulic Shear HACO HS 3010 Capacity: 3000 x 10 mm Back gear gauge travel: 1000 mm Kdsdpfxsz Izmco Ahbeu Year of construction: 1983 Manual adjustment of the clearance between blades Cutting angle: 1° to 3° Voltage: 380 V Dimensions (L x W x H): 4000 x 2100 x 2200 mm Weight: approx 8 T

Condition: used, Rotating Boring Table Travel X: 2000 mm Table size: Length 1240 mm x Width 1250 mm Kjdpfx Ahjz Nxmkebjdu Bench width: 1030 mm Diameter of the ball screw: Ø 70 mm 2 motors INDRAMAT: 1 travel X motor + 1 table rotation motor Supplied without electrical panel (electrical cabinet to be redone) Protector hennig in average condition Ideal part for retrofitting Total bench length: 5200 mm Width: 1900 mm Height: 900 mm Weight: approx 7 T

Condition: good (used), functionality: fully functional, Cutting length: 2020 mm Max. sheet thickness at 400 N/mm²: 5 mm Max. sheet thickness at 750 N/mm²: 3 mm Kdjdpfx Ahjz Sqmzsbeu Cutting angle approx.: 1.5° Strokes per minute: 40 strokes/min Back gauge approx.: 750 mm Stand throat depth: 200 mm

Condition: used, Gratings, gratings, light grilles, insert grilles, insert grilles, stair steps, safety steps, grating steps, steps -Grid step: 1000 x 265 mm -Total height: 70 mm -Struts: wall thickness 2/2,5 mm -Bridge height: 30/10 mm Koderrzc Espfx Ahbsdu -Gratings: Hot-dip galvanized -Quantity: 3x grids available -Price per piece -Weight: 7,7 kg/piece

Condition: used, Technical data: - Strip thickness: 0,6 – 4,0 mm - Strip width: 600 –1550 mm - Coil I.D.: 508 –610 mm - Coil weight (max.): 25 ton - Coil O.D.: 2000 mm - Side trim: 3-9 mm - Working Speed: 100 – 200 m/min - Cutting shaft diameter: 180 mm - Knive OD: 300 mm - Max. Number of cuts with thickness 0.9mm: 25 Cuts - Max. Number of cuts with thickness 4mm: 3 Cuts - Average production previous owner: 10 coils/shift (8 h) Scope of supply: - 25Tn loading car with 2 loading positions - 25Tn Single mandrel uncoiler with - Supporting arm unit - Snumbber roll - Coil opener - Entry straightener with hydraulic Shear - Intermediate guiding table with vertical centering rolls - Circular shear: - With 180mm shaft diameter - Quick-change system with 2nd shaft on-line - Loop table with hydraulic cover - Strip guiding axe with spacer - Pneumatic felt-press brake - 25Tn Single mandrel recoiler - 25Tn exit unloading car - 25Tn coil 1 arm turnstile - Scrap recoiler - Electrical cabinets & operator panels - Hydraulic group - Safety barriers and photoelectric barriers - Stairs, passages, and accessories - Documentation and manuals - Complete set of tooling (quantities to be confirmed) * Strip thickness: 0,6 – 4,0 mm * Strip width: 600 –1550 mm Kjdpez Tylvefx Ahbedu * Coil O.D.: 2000 mm * Coil I.D.: 508 –610 mm * Coil weight (max.): 25 ton * Working Speed: 100 – 200 m/min * Cutting shaft diameter: 180 mm * Knive OD: 300 mm

Condition: used, Year of construction: 1989, sheet thickness: 8driving power: 18,5weight approx.: 5800messurements (LxWxH): 2130 x 3260 x 2360sheet length: 1550Technical Data: Max. cutting length: 1,550 mm Throat depth (side clearance in frame): 50 mm Kdodpfx Ahevaatljbeu Sheet passage: 16 mm Cutting angle adjustable: 0.5° – 2°30′ Strokes per minute: 25 – 32 Number of hold-downs: 8 Cutting pressure: 280 bar Oil capacity: 300 liters Total connected load: 20.1 kW Overall dimensions (L × W × H): 2,130 × 3,260 × 2,360 mm Equipment: CNC control SIEMENS S5 for numerical sheet metal backgauge control Sheet support device with motorized scrap separator Sheet discharge with conveyor belt Blade clearance and cutting angle programmable via control Spare blades included Shear blades suitable for material up to 750 N/mm² tensile strength Separate hold-down operation for cutting along marked lines Hold-down pressure adjustable and readable from the front 2 swing-away backgauges Finger guard with handle recess Ball rollers integrated in the support table Angle gauge with vernier scale Foot switch Condition:Used, in good condition

Condition: used, Mechanical Shear BOMBLED type 9G Capacity: 2500 mm x 4 mm Manual Back gear gauge travel: 500 mm Supplied with 2 front length stops Voltage: 380 V Dimensions (L x W x H): 4000 x 1500 x 1500 mm Kodpfx Ahjz Izmijbodu Weight: approx 4,5 T

Condition: like new (used), Year of construction: 2022, functionality: fully functional, power: 22 kW (29.91 HP), - Mill for, e.g., processing lumps Kdjdep E Anvjpfx Ahbeu - Unused machine - Open rotor - Grinding mechanism 650 mm x 550 mm - Control system Spare parts can be supplied. (Sieve, blades, etc.)

Condition: good (used), Indexable insert drills, high-performance drills with indexable inserts, solid drills, end mills, shank cutters, milling cutters, indexable insert end mills, shank cutters with internal cooling, indexable insert end mills Kdsdpfx Ahs Aayncsbju -Finger end mills: Indexable insert end mills with internal cooling, 10 pieces -Hole: Ø 32 mm -Diameter: See photos for sizes/reversible inserts -Submission/Price: complete -Transport dimensions: 265/100/H190 mm -Weight: 7.3 kg

Condition: used, Year of construction: 1985, sheet thickness: 2,25total power requirements: 1,1sheet length: 2025 Working length: 2025 mm Kl. Tail width: 5 x s Kl. Inner radius: 1.5 - 2 x s Adjustability of the lower and bending beams: 90 mm for round bends: 90 mm Highest working position of the upper beam: 190 mm large opening width of the upper beam: 290 mm Duration of a workflow: 7.0 sec. External dimensions approx.: 3000 x 1000 x 1650 mm with: - Control panel on the right side of the machine - Simple bending angle adjustment on the control panel Kdedsvaatfspfx Ahbou - Choice of switching to automatic, semi-automatic or typing mode - Potentiometer for degree adjustment -Foot switch used, in good condition

Condition: used, Small Drilling/Milling Machine ISERT ELECTRONIC Kedpfoz Nxwcex Ahbedu Travel X: 350 mm Travel Y: 300 mm Travel Z: 70 mm Rotation: 8000 / 9500 / 13500 / 20500 / 24000 RPM The machine could be used for drilling printed circuit boards or other use. The machine was controlled through a PC that is no longer present. Possibility to use it in manual Equipped with: 1 Milling Machine KRESS Voltage: 220 V mono Dimensions (L x W x H): 950 x 700 x 700 mm Weight: approx 60 KG

Condition: used, Year of construction: 1989, sheet length: 3.100sheet thickness: 8,0cutting area width: 3100total power requirements: 11weight approx.: 7500messurements (LxWxH): 4180 x 2150 x 2000 Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Quick cutting-length adjustment • Hydraulic and electrical overload protection • Squaring arm and front support arms • Bed infill plates with ball transfers • Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Sequence repeat function • Kdedpfxoru Un He Ahbou Auto-cutting (Flying cut)

Condition: good (used), End mill, shank mill, milling cutter Kdodpfx Asb A Rbajhbsu -Six-cutter -Finishing cutter -Diameter: 32 mm -Usable length: 200 mm -Type: HSSE N30 -Quantity: 9 pieces -Sale: only complete set -Weight: 12 kg

Condition: good (used), Year of construction: 1964, Container rotator, boiler rotator, welding rotator, welding rotator, welding device, welding turntable, welding rotator -Manufacturer: Deuma Heitze, Container rotating device, Welding rotating device type H 02.5 -Load capacity: kg -Roller spacing: 320 x 950 mm -Rollers: Ø 240 x 170 mm -Rolling speed: 0.15 to 1.35 m/min Right/Left rotation -Control unit: with manual control -Individual components: see photos -Transport dimensions: 1150/1105/H550 mm / 1100/600/H550 mm -Weight: 607 kg / 365 kg Kjdpfjzkqt Hox Ahbedu

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, overall weight: 3,000 kg, COMPLETE FEEDING LINE 3v1 UNCOILER + STRAIGHTENER + FEEDER Type CR-AP 400 Year 2013 width = 400 mm thickness minimal 0,5 mm thickness max = 3,0 mm 9+2 straightener rollers UNCOILER: model SM15 Year 2013, motorized, hydraulic expansion pressure arm coil width 400 mm Decoiler capacity 1500 kg Ksdpez S T Sgjfx Ahbedu The feeding straightener straightens the material and feeds it into the press. The "CR AP" series features an opening head for easier roller cleaning and pilot release. This type of machine is suitable for working with medium-thickness strips.

Condition: used, Tool holder, milling holder, chuck, milling tool, adapter, clamping unit, tool holder, collet sleeves -Milling holders: MK5 holder -Type: Ø32 x 22 mm Kodpfeuhr Rgjx Ahbsdu -Dimensions: 200/60/60 mm -Weight: 2.1 kg

Condition: used, Cast iron bed 2600 x 2000 x 350 mm Length: 2600 mm Width: 2000 mm Thickness: 350 mm 8 T-slots T-slots dimensions: 55 x 35 mm Slots spacing: 250 mm Equipped with 12 leveling feet Kdjdpoz I A Nrofx Ahbeu Weight: approx 4,5 T

Condition: used, Cast iron bed Length: 3650 mm Width: 1370 mm Thickness: 150 mm 11 T-slots - dimensions 32 x 18 mm Kedpfez I A Tksx Ahbsdu Slots spacing: 125 mm Assembly in 2 parts Dimensions of each part: L 1820 mm x W 1370 mm x H 150 mm Total height on base 875 mm Weight: approx 4 T

Condition: used, Cast bed Length: 2410 mm Width: 1500 mm Thickness: 550 mm 8 T-slots 50 x 27 mm Kdsdpfxsz Nyc Hs Ahbsu with 2 opening (possibility to close them) 1 opening L 560 x W 500 mm 1 opening L 480 x W 360 mm Weight: approx 5 T

Condition: good (used), Dust extraction blower, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower, fan Kdjdpfxox S Einj Ahbsu -Fan: Radial fan blower, without drive -Type: Fan wheel Ø 265 x 35 mm -Drive shaft: V-belt pulley Ø 75 mm, see photos -Inlet connection: Ø 95 mm -Outlet connection: Ø 95 mm -Dimensions: 355/200/H490 mm -Weight: 7 kg

Condition: good (used), Quadruple steel holder Steel height: 60 mm Dimensions: L. 190 x W. 185 mm Kjdpfx Ahsdcwzuebedu

Condition: good (used), grinding drum, deflection drum, belt sander, belt grinder, drum sander, drum sander, conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Manufacturer: KED Kurt Ehemann, grinding drum drum width 200 mm -Drum: Ø 320 mm -Hole: Ø 30 x 200 mm -Quantity: 1x drum available Kjdsvxqfcopfx Ahbodu -Dimensions:Ø 320 x 200 mm -Weight: 19.4 kg

Condition: good (used), grinding drum, deflection drum, belt sander, belt grinder, drum sander, drum sander, conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Manufacturer: KED Kurt Ehemann, grinding drum drum width 200 mm Kjdpfx Ahsvxqihobjdu -Drum: Ø 320 mm -Hole: Ø 30 x 200 mm -Number: 2x drum available -Price: per piece -Dimensions: Ø 320 x 200 mm -Weight: 26.6 kg/piece