Used Styrotec Fs10 St for sale (14,845)

Condition: new, Year of construction: 2024, operating hours: 50 h, machine/vehicle number: 305, Available: February 2023 Control: Osai X-axis: approx. 3,100 mm Y-axis: approx. 2,100 mm Z-axis: approx. 1,000 mm A-axis: ± 115° C-axis: ± 360° Clamping table Clamping surface: approx. 3,100 x 2,100 x 213 mm Aluminum with T-slots across every 250 mm Max load: 1000kg distributed over the entire surface Iaodpfx Aaowwq Hcj Esw 2-axis milling head ST7 Spindle power: 10 kW Spindle speed: max. 24,000 min-1 Torque: 15.3 Nm Tool holder: HSK 63F Tool clamping: pneumatic Blowing air / MMS: outside Drives linear axes Feed speed X and Y axes: up to 50 m/min Z-axis feed rate: up to 30 m/min Color Housing, portal, control cabinet: light gray Z-slider and milling head: orange Additional equipment - 15-way tool changer - Control in a separate, rollable desk

Condition: used, Year of construction: 2016, The shredder breaks down large, bulky pieces of Styrofoam, EPS, and similar materials with a maximum bulk density of 30 kg/m³ into small pieces. The shredder reduces the volume by approximately 65%. This makes the machine ideally suited for use in industrial and craft businesses as well as for wholesale and retail trade of packaging materials made of Styrofoam. Depending on the screen set, simply shredding your Styrofoam waste achieves a volume reduction of 3:1. Custom-made solutions are available upon request. VAT is stated separately on the invoice. Shipping is included throughout Germany, with an extra charge for island deliveries. Iedpfszlh Taox Aa Eoaw If you have any questions, please feel free to contact us.

Condition: new, Year of construction: 2026, The shredder breaks large, bulky pieces made of Styrofoam and EPS and similar materials with a maximum raw density of 30kg/m³ into small pieces. The shredder reduces the volume by around 65%. This makes the machine ideal for use in industrial and craft companies as well as for wholesale and retail trade with Styrofoam packaging material. Throughput: Sieve 10 mm: approx. 3 m³/h Sieve 20 mm: approx. 8 m³/h Sieve 30 mm: approx. 13 m³/h Sieve 40 mm: approx. 18 m³/h Sieve 50 mm: approx. 23 m³/h Depending on the sieve set, the volume can be reduced by 3:1 just by shredding your Styrofoam residues. Custom-made products are available on request. VAT is shown separately on the invoice. Shipping included throughout Germany, islands with surcharge. If you have any questions, please feel free to contact us. Iaedpfx Aaoxlzkrs Eew

Condition: used, Year of construction: 2021, functionality: fully functional, ST GROUP – Year 2021 Vertical Washing Machine H1600 mm 6 Brushes Iaedszikprepfx Aa Esw Low-E Coating Open Top

Condition: good (used), Year of construction: 2015, Steering skate length:630mm Steering skate width:220mm Steering skate hight:115mm Skate length: 630mm Skate width: 220mm Skate hight: 115mm Max. loading capacity:12T Iedpfewvhpfox Aa Ejaw Wheel Ø: 85mm Wheel material: steel Hydraulic jacks: 2 Lifting range of foot:30 - 260mm Lifting range of head:420 - 650mm

Condition: good (used), Technical data for the pallet racking system: Racking system: Dexion Type: P 90 Technical data for installation: Number of rack rows: 01 pcs. Length per rack row: 15,540 mm Number of bays per row of shelves: 05 pcs. Number of levels plus floor level: 02 pcs. Technical data on volume: Pallet spaces per bay: 09 pcs. Pallet spaces per rack row: 45 pcs. Total pallet spaces: 45 pcs. issued from: Loading equipment: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 600 kg The scope of delivery includes: 06x pallet rack uprights, used Material color: sendzimir galvanized Type: H Profile dimensions: 90 x 75 x 2.25 mm Incl. cross and diagonal braces, foot plates The uprights are pre-assembled Iaodoruqfaepfx Aa Eow (bolted framework) 2,500 mm high 1,100 mm deep 20x pallet rack crossbars, used Material color: sendzimir galvanized I-profile: 120 x 50 mm Beam type: SLI120/14 Agraffe: 5 HK Clear width: 3,000 mm 40x locking pin, used Material color: sendzimir galvanized To secure the side rails against unintentional lifting out 24x bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 12x shim plate, used Design: completely galvanized For leveling the shelf uprights that are are set up on uneven floors 01x Load plate with details of bay and shelf loads, manufacturer and commission number Dimensions: 297 x 210 x 2 mm Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: new, Technical data for the shelf rack upright: Shelving system: SSI Schäfer Type: R 3000 Included in delivery: 01x shelf rack upright, new goods Material color: sendzimir galvanized profile dim.: approx. 60 x 30 mm Incl. bulkhead and base plates Iedpfx Aajpbwaho Ejaw The uprights are unassembled 2.490 mm high 500 mm deep Remark: The shelving uprights are supplied unassembled when ordered unassembled when ordered. For an extra charge of 7,50 € / piece plus VAT we can also preassemble the also pre-assemble the uprights. Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: excellent (used), Technical data for the pallet rack upright: Racking system: Stow Type: Pal Rack NS Iajdpfx Ask Uuv Sea Eew Included in the scope of delivery: 01x Pallet rack upright, used Material color: Sendzimir galvanized Frame profile: 140 x 80 x 2.25 mm Incl. cross and diagonal braces, Base plates The uprights are pre-assembled (bolted frame) Height: 9,650 mm Depth: 1,100 mm General information about the item: This item is offered for pick-up only. Any further desired transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, type of input current: three-phase, product height (max.): 650 mm, product length (max.): 3,000 mm, product width (max.): 1,350 mm, overall weight: 2,300 kg, input frequency: 50 Hz, nominal power: 59 kW (80.22 HP), temperature: 220 °C, pass-through width: 1,400 mm, Shrink tunnel: Manufacturer: Kuper ST/I-1400 year of manufacture: ca 1988 max capacity: width: 1350mm height: 650mm work length: 3000mm 2 pcs centrifugal fan blow-off units heating power: 59 kW temperature range 230 °C endless conveyor belt throughput speed 5 m/min Length: 3500 mm Width: 2350 mm Ijdpsxt Idbjfx Aa Ejaw Height: 1850 mm

Condition: excellent (used), functionality: fully functional, actuation type: mechanical, coil inner diameter: 200 mm, coil outer diameter: 800 mm, coil weight: 100 kg, coil width: 220 mm, for sale AMADA ORII manual sheet metal winder cable winder manufacturer/type AMADA ORII ST 02 Z coil width: max 220mm coil inner diameter 200-500 mm Iajdpfexvitvox Aa Ejw coil outer diameter: 1100mm coil weight max 100kg

Condition: like new (used), 🧰 Product features Manufacturer: UTZ Condition: as new Material: High-quality polypropylene (PP) Color: black External dimensions: 350 × 210 × 145 mm Internal dimensions: 305 × 180 × 134 mm Volume: 7 liters Weight: 0.66 kg Special features: Euro norm, stackable, ESD - conductive 💰 Price € 5,- net excl. VAT Bulk discount: on request Shipping costs: Europe-wide upon request Delivery time: Available immediately Inspection and collection: possible at any time by appointment Iasdewaa Nfspfx Aa Eow Over 5,000 linear meters of pallet racking from various manufacturers always in stock (Subject to technical modifications, errors and prior sale! See our terms and conditions, all prices excl. VAT ex warehouse.)

Condition: like new (used), 2,500 m² storage racking system, Schäfer R3000, 2-3 levels Used, in top condition, like new, see pictures Manufacturer: SCHÄFER R3000 CAD planning and assembly 2-3 levels Price on request! Partial sale possible Negotiable price: on request! Goods are in stock and readily available. Iaodpfx Aaefiqhle Esw Transport and assembly possible on request. Inspection possible at any time by appointment. Further information available on request. We constantly have over 5,000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications, and prices, as well as prior sale! See our terms and conditions; all prices exclude VAT, ex warehouse.) Purchase/Sale: We are continuously looking for or offering numerous items from various areas: complete liquidation of business premises business closures fast, flexible, and efficient! We also clear and/or dispose of goods for insolvency administrators. Please send us some keywords, and we will get back to you promptly. To visit our website, please click on our logo!

Condition: excellent (used), Year of construction: 2013, Swing 806mm, Swing over cross slide 527mm, maximum cutting diameter 305mm, 533mm maximum cutting length, Iaedoy Ex T Topfx Aa Eew 50mm Bar capacity, 8” chuck, 20Hp Spindle Motor, C axis 0.01 degrees, Y axis +/- 51mm, 4000rpm spindle speed, 6,000rpm milling speed, 12 Station turret, parts catcher, tailstock, tool setter, coolant

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm - Load capacity per stand 2,500 kg - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. Iedpfxeqt Dmye Aa Esaw When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: new, Year of construction: 2025, machine/vehicle number: 306, First commissioning: 2024 Control: Heidenhain TNC 640 including handwheel HR 520 X-axis: approx. 4,000 mm Y-axis: approx. 2,700 mm Z-axis: approx. 1,300 mm A-axis: ± 120° C-axis: ± 360° Iajdpfxovy Dugj Aa Eew Clamping table Clamping surface: approx. 4,000 x 2,500 x 213 mm Aluminum with T-slots across every 250mm Max load: 1000kg distributed over the entire surface 2-axis milling head HS673 Spindle power: 22 kW Spindle speed: max. 24,000 min-1 Torque: 18 Nm Tool holder: HSK 63A Tool clamping: pneumatic Blowing air / MMS: outside Linear axis drives Feed rate X and Y axis: up to 60 m/min Feed rate Z axis: up to 40 m/min Color Housing, portal, control cabinet: light gray Z slider and milling head: orange Additional equipment - Work area cover - 16-way tool changer - Control in a separate, rollable desk Optional for an additional charge: - Blum laser tool measurement - Renishaw RMP60 radio probe - Heidenhain remote diagnosis Images show identical machine with slightly different equipment!

Condition: like new (used), The MSP 120 ZK is ideally suited for crushing and subsequent briquetting of various types of metal chips. The MSP 120 ZK briquetting press with integrated shredder is composed of a hydraulic chip press paired with an upstream shredder, both perfectly matched to each other. This system enables the crushing and compaction of chips generated during turning and milling operations. The volume is significantly reduced, and the briquettes are separated from the coolant lubricants (emulsion, oil) absorbed during earlier machining processes. The system consists of a feed hopper for loading the material to be processed and a shredder inside the hopper, which reduces chip length. A conveyor system moves the shredded chips continuously and stepwise via a conveyor belt into the chip press hopper. There, two augers feed the material into the compaction chamber. The system is equipped with a monitored liquid collection tank and pump, allowing coolants to be returned to the production process. Cycle control is managed by a PLC and an electronic level sensor for the monitoring of the hopper fill level. Optionally, a tipping device can be added for manual loading of the unit. Briquetting Press: Throughput (Aluminum): 15–20 kg/h Throughput (Steel, Copper): 45–60 kg/h Briquette diameter: 60 mm Productivity: 120–180 pcs/h Specific pressure on briquette: 1,050 kg/cm³ Motor pump power: 7 kW Total installed power: 10 kW Voltage: 400V / 50 Hz Oil tank: 80 l Dimensions: 1,400 x 1,200 x 1,050 mm Weight: 800 kg Shredder: Number of knife shafts: 1 pc Motor power: 5.5 kW Number of knives: 16 pcs Exchangeable knives: Yes Knife size: 25 mm Knife material: Hardened steel Shaft length: 400 mm Screen mesh size: 20 mm Hopper inner diameter: 1,000 mm Hopper volume: 1 m³ Iaedpfew R Ranox Aa Ejw Weight: 280 kg Power supply: 380V Overall system dimensions: 2,820 x 1,862 x 2,065 mm Colour: Textured paint, RAL 7035 light grey

Condition: like new (used), 3,000 pcs. insert mesh panels with pallet stop, as new 🧰 Product features • Condition: as new • Colour: galvanized • Dimensions: 930 x 1170 mm Iajdpfx Aoxhc Rxja Ejw • Mesh size: 45 x 95 mm • Load capacity: 200 kg per mesh panel • Inner clearance: 99 cm • Outer clearance: 110 cm • Features: with pallet stop 💰 Price: €9.90 net excl. VAT • Quantity discount: on request • Shipping costs: Europe-wide on request • Delivery time: available immediately • Inspection and collection: possible at any time by appointment Constantly over 5,000 linear metres of pallet racking from various manufacturers in stock (Subject to changes and errors in technical data, information, and prices as well as prior sale! See our Terms and Conditions. All prices excl. VAT ex stock.)

Condition: refurbished (used), functionality: fully functional, warranty duration: 6 months, electrical fuse: 16 A, input voltage: 400 V, year of last overhaul: 2025, Dough divider for bread dough weights from 250 to 1,650 grams. Completely overhauled with a revised dough chamber. Capacity: 960 pcs/hour or 16 pieces per minute. Iedpfxex Ahm Us Aa Eoaw

Condition: used, 🧰 Product Features • Condition: Used item, see photos • Colour: grey • Material: metal • External dimensions: 124 x 83.5 x 97 cm • Load capacity: 1000 kg • Stack load: 5000 kg • Weight: 78 kg • Front side: foldable • Base: sheet metal floor with wooden insert 💰 Price €99 net, excl. VAT • Quantity discount: on request • Shipping costs: Europe-wide on request • Delivery time: Immediately available • Inspection and collection: by appointment at any time Over 5000 linear metres of pallet racking from numerous manufacturers constantly in stock Iaodpovb T Ewjfx Aa Esw (Subject to changes and errors in technical data, specifications and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT ex warehouse.)

Condition: used, Year of construction: 2008, tube diameter 40- 115 mm wall strength 6/4,5 mm bending angle max. ° bending radius max. 350 mm weight of the machine ca. 10 t dimensions of the machine ca. 4,0 x 1,8 x 1,5 m used mandrel bending machine in good condition - working time 90° 12 sec. (forward) - max moment 53,2 cm2 - bending height 1050 mm - Electrohydraulic drive - Automatic start - Foot and hand switch Iajdozmitqopfx Aa Ejw - Counter bearing running along - Rated pressure 250 bar / Operating pressure 200 bar

Condition: new, empty load weight: 7,950 kg, maximum load weight: 37,050 kg, overall weight: 45,000 kg, axle configuration: 3 axles, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Reinforced design, air suspension with lift axle, axle load gauge for axle load, length of the highbed approximately 4,140 mm, length of the lowbed approximately 8,600 mm, loading height approximately 900 mm, suitable for 2-axle and 3-axle semi-trailer tractors, front wall approximately 1,600 mm high, 18 x stake pockets in the outer frame, 3 x transverse stringer strips, 24 x lashing points, 4 pairs of container locking mechanisms for 2 x 20 ft. ISO containers or 1 x 40 ft. ISO container, surcharge for aluminum ramps, price: 2,200 €, spare wheel, price: 300 €, -- subject to printing errors, errors and changes, sample images --, more data under: !, More Details: ! Iodpfx Aezmgv Aoa Esaw

Condition: new, overall weight: 48,000 kg, axle configuration: 3 axles, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Reinforced design, air suspension with lift axle, axle load gauge for axle load, length of the upper deck approximately 4,400 mm including the slope, length of the lower deck approximately 8,500 mm, loading height approximately 900 mm, suitable for 2-axle and 3-axle semi-trailer tractors, front wall approximately 800 mm high, 16 x stake pockets in the outer frame, 32 x lashing points, ramp approximately 4,200 mm long (2-part), hydraulic adjustment of the ramps, ramps for driving over on the gooseneck. -- Subject to printing errors, errors and changes, sample images --. More data available at: ! Iaodpfx Aaezmgvvj Eew

Condition: new, empty load weight: 10,600 kg, maximum load weight: 37,400 kg, overall weight: 48,000 kg, axle configuration: 3 axles, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Reinforced design, air-suspended with lift axle, axle load gauge for axle load, length of upper bed approximately 4,400 mm including slope, length of lower bed approximately 8,500 mm, loading height approximately 900 mm, for 2-axle and 3-axle semi-trailer tractors, front wall approximately 800 mm high, 16 x stake pockets in the outer frame, 32 x lashing points, ramp approximately 3,100 mm long, ramps for driving over on the gooseneck, hydraulic adjustment of the ramps, price: 1,000 €, -- subject to printing errors, errors and changes, sample images --, more data at: !, More Details: ! Isdpfx Ajzmd R Rea Eeaw

Condition: new, empty load weight: 8,050 kg, maximum load weight: 36,950 kg, overall weight: 45,000 kg, axle configuration: 3 axles, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, HOT-DIPPED GALVANIZED, reinforced design, air-suspended with lift axle, axle load gauge for axle load, platform length approximately 4,180 mm, low-loader length approximately 9,400 mm, loading height approximately 900 mm, front wall approximately 1,600 mm high, 14 x stake pockets in the outer frame, 3 x transverse stringer strips, 24 x lashing eyes, 4 pairs of container locks for 2 x 20 ft ISO containers or 1 x 40 ft ISO container, surcharge for aluminum ramps = price: €2,200, subject to printing errors, errors and changes, sample images, more details at: ! Iodpfx Aezl Tzpsa Eeaw

Condition: excellent (used), Year of construction: 1980, table width: 460 mm, table length: 745 mm, space requirement height: 2,400 mm, space requirement length: 1,200 mm, space requirement width: 800 mm, Manufacturer: Alzmetall Type: AB 40 ST Spindle: MK 3 Iodpfx Aaovwkw Ao Esaw Table dimensions: 745 x 460 mm Machine can be viewed under power