Used Steuer Foiljet Fbr 104 for sale (1,017)

Year of construction: 2001, condition: used, machine/vehicle number: 15026, Format: 720 x 1040 mm Tjdpfswabbvsx Amrsc The machine is a foil hot stamping machine, e.g., for holograms. It consists of a feeder, printing unit, and delivery unit (see photos). A total of 70 machines were built. The machine is currently fully functional with the new control system. The estimated cost to bring it into operation is approximately €150,000-200,000 (dismantling, transport, assembly, commissioning, training, documentation for the new control system).

Year of construction: 1989, condition: good (used), machine/vehicle number: 216, Size: 64 x 90 cm, 4 steps, 4 heating zones Todpfxoz Hngte Amroc Foil capacity: 20-800 m, production capacity: 3600 sheets/hour Maximum sheet size: 64 x 90 cm, minimum sheet size: 29 x 45 cm, effective foil working size: 54 x 82 cm.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 1045331039, Elumatec DG 104 Twee-kopszaagmachine - bouwjaar 2006 - in goed werkende staat Tedpfx Ajz Eqxvjmrjc De machine kan ter plaatse in werking worden getoond; demontage is voor rekening van de koper. Machine beschikbaar begin december 2026.

Year of construction: 1995, condition: ready for operation (used), functionality: fully functional, Sheet size minimum: 290x400 mm Sheet size maximum: 640x900 mm Sheet thickness maximum: 0.75 mm Hot stamping size maximum: 620x840 mm Sheet edge free of print stamping (gripper edge): 8-10 mm Number of heating zones: 4 Cylinder diameter: 540 mm Backing thickness: 1.5 mm Height of the feed pile and pre-pile: 340 mm Height of the delivery pile: 510 mm Vertically adjustable hot stamping bed: -2...+0.4 mm Width of the stamping foil rolls (max): 840 mm Distance between the stamping foil rolls (min): 3.0 or 1.0 Outside diameter of the stamping foil rolls (max): 140 mm Foil pull rollers and programs (max): 4 Short pulls per program and cycle, number 1...99, length: 0...999 mm Intermediate pull per program and cycle, number as required: 0...999 mm Long pull per program and cycle, number 1, length: 0...999 mm Hot stamping die height: 7 mm Different hot stamping die height also available if required: 6.35 mm Machine speed: 600-4000 Hot stamping speed, max: 600-3000 Connected electrical load ratings (3-phase) for drive: 10.8 kW Connected electrical load ratings for heating and foil pull: 17.0 kW Voltage: 3x400V, 50Hz Overall dimensions: Length of the machine: 4000 mm Width of the machine: 2540 mm Height of the machine: 1950 mm Support area of the base frame: 2.1 m² Work area: 5650 mm Length: 5650 mm Width: 3650 mm Total weight: 7500 kg. Tsdszatf Eopfx Amrec

Condition: good (used), Year of construction: 2006, travel distance X-axis: 1,040 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, Machine type: CNC vertical machining center Travel in X-axis: 1,040 mm Travel in Y-axis: 600 mm Travel in Z-axis: 500 mm Table size: 1,250 × 600 mm Max. table load: 600–800 kg Tool holder: SK 40 Tool changer: 30 positions Max. tool diameter: 100 mm / 140 mm with available adjacent positions Max. tool length: 300 mm Tedpfez Dd Sasx Amrec Max. tool weight: 7 kg Feed rate: up to 40 m/min Rapid traverse: up to 70 m/min Machine weight: approx. 8,900 kg Linear drive / Linear technology

Year of construction: 1988, condition: excellent (used), Heidelberg Cylinder SBD PZ 90 Control System – Technical specifications: 4 impression cylinders, 4 heating zones, foil capacity: 20-800 m, working capacity: 3600 sheets/h, max. sheet size: 64 x 90 cm, min. sheet size: 29 x 45 cm, foil working size: 54 x 82 cm. Tjdpfx Aozd Tw Uomrec

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 1,040 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, controller model: TNC 530, workpiece weight (max.): 800 kg, total height: 2,800 mm, total length: 4,060 mm, total width: 2,450 mm, table width: 600 mm, table length: 1,250 mm, table load: 800 kg, overall weight: 8,800 kg, spindle speed (max.): 18,000 rpm, spindle nose: SK 40, number of slots in tool magazine: 30, Equipment: documentation/manual, oil mist separator, The machine is in very good condition, with an accuracy of 3/100. The spindle was replaced in 2017. It has had one owner and has undergone regular maintenance. It will be available in the last week of October, and the price includes loading and technical documentation. It features air conditioning for the electrical cabinet and spindle temperature control. Inspection or re-measurement can be arranged upon request. Tedpfozy D Hljx Amrsc

Condition: used, Year of construction: 2000, functionality: fully functional, power: 8 kW (10.88 HP), input voltage: 400 V, input frequency: 50 Hz, cutting height (max.): 550 mm, cutting width (max.): 650 mm, total length: 2,250 mm, total width: 3,700 mm, overall weight: 2,400 kg, Equipment: CE marking, documentation/manual, lighting, motor brake, For sale: immediately available, fully operational vertical bandsaw, Friggi 104/FG 700 TS, manufactured in 2000. Work surface: 1200mm x 1500mm Table load capacity: 1000kg Todozvhr Dopfx Amroc Vertical cutting capacity: 550mm Horizontal cutting capacity: 650mm The machine is available for immediate delivery! Technical specifications can be found in the photo!

Year of construction: 2011, operating hours: 13,600 h, condition: excellent (used), functionality: fully functional, Technical data: BOBST VISIONFOIL 104 Max. sheet format: 1,040 × 740 mm Min. sheet format: 400 × 350 mm Max. embossing/hot foil stamping area: 1,010 × 702 mm Production speed: up to 7,500 sheets/hour Embossing force: up to 2.6 MN (286 US tons) Foil unwinders/web advance shafts: 2 standard Foil width: 25–1,020 mm Max. roll diameter: 250 mm Heating temperature: 20–160 °C Heating zones: 12, individually adjustable Paper: from 80 g/m² Cardboard/solid board: up to 2,000 g/m² Corrugated board: up to 4 mm Machine length: approx. 6.50 m Machine width: approx. 6.00 m Machine height: approx. 2.20 m 4 honeycomb plates Foundation exchange table (third-party product) Machine raised by 300 mm Machine is equipped with a foil braking brush (not visible in the video) or, if equipped with extraction/tube cutter, with a funnel system! High-performance machine for stable foil transport, even at high speeds and with long foil unwinders! Extremely short setup times for sheet processing and foil unwinding! Not a Chinese copy or a Bobst BMA replica! Machine has only 14,000 hours of operation! Tedpfozt Iduex Amroc Condition very good! Bobst platen conditioning performed (die service) 5/26 Can be inspected at any time during production, and is encouraged! Available from December/January 2026/27 Videos available upon request via WhatsApp! Direct sale to a production company preferred! No dealer options will be offered! A package deal with a Bobst 102E2 is also possible (also with an exchange table and honeycomb foundation for blind embossing)!

Condition: excellent (used), Offer consisting of: PZ-82 (57x82 cm), hot foil stamping cylinder in exceptional condition, immediately available, test possible. Tsdpfeynuudjx Amroc

Condition: used, Year of construction: 2008, machine/vehicle number: 654/08, functionality: fully functional, Used automatic edge bander with pre-milling unit. Robust machine designed especially for solid wood edges and lippings. - Control via LCD touch panel - Heavy-duty chain feed conveyor - Automatic thin edge feeding from magazine - Solid edge magazine Todeu T Nhmepfx Amroc - Pre-milling of panels using 2 cutter heads (with insert knives) - Glue preheating in a separate tank - Reinforced pressure zone with 5 pressure rollers - End trimming with 2 saw blades - Top and bottom trimming Technical data: - Min./Max. edge height: 14 / 104 mm - Min. edge thickness: 0.4 mm - Min./Max. panel thickness: 10 / 100 mm - Feed speed: 12 m/min - Min. working length/width: 200 / 85 mm - Milling tool speed: 12,000 rpm - Dimensions: 5250 x 1100 x 1650 mm - Weight: 2000 kg The machine has been used and tested. It is operational but requires maintenance, cleaning, adjustment, and sharpening of the tools. Sold in its current condition.

Condition: ready for operation (used), Year of construction: 1994, KBA RAPIDA 104-5 Year: 1994 Minimum format: 450 x 640 mm Maximum format: 1020 x 720 mm Maximum speed: 12,000 impressions/hour Equipment: Todpfxoz E N Uis Amrsc • BALDWIN automatic printing blanket washing system • Automatic format adjustment system • BALDWIN alcohol dampening system • BALDWIN chiller for fountain solution preparation • IR dryer for printed sheets (has not been used since the machine was installed, around 2006) In production Available immediately

Condition: used, Year of construction: 1978, Year: 1978 – recently modernized TECHNICAL DATA: • Max. web width: 1450 mm • Max. unwind diameter: 1000 mm • Max. finished reel diameter: 400 mm • Hydraulic reel lifting • Circular slitting system Tedpfxoz Ern So Amrjc • 4 Rewind shafts on two turrets • Pneumatic brake • Length measuring and control system • Optical edge control Machine has been completely overhauled and equipped with new AC motors, a new cabinet and panels; new PLC Siemens S7; new Montalvo pneumatic brake and controls; new edge control for detecting edges from both the top and bottom.

Condition: like new (used), Year of construction: 2021, operating hours: 100 h, functionality: fully functional, cutting length (max.): 6,000 mm, Elumatic double miter saw incl. accessories, short-length cutting device, infeed roller conveyor, ECI-580 control system. Tedpfozfaglsx Amrjc

Condition: used, Year of construction: 2014, Candle Filter System – Automatic, 3 Filters 2x Filter housings 30" x 3 FBFM33 1x Candle filter FBT013GNW25J Tjdpoz Icilefx Amroc 1x Sepex pump 1x Pump for injection of oenological product after filtration or reinjection of wine 1x Mounted on skid, fully equipped with fixed piping

Year of construction: 1973, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 658, Available directly from our warehouse in Son; Tsdpfxsxz Niuo Amrjc heavy stamping die with electric coupling, electrical system completely renewed around 2019, original build year 1973; mechanically fully overhauled in 2015, moving die resurfaced, die pins and gears replaced with new pins of a much stronger mechanical grade than originally, as well as the bronze bearings now made from material grade 2.1061 DIN 1705; this is extremely wear-resistant with the addition of Pb (lead) for better performance and good emergency running characteristics (i.e., no lubrication), stamping plate 144 x 104 cm, thickness 5mm. Electrically upgraded with PILZ safety relays on each channel, motorized clamping of the stamping die. Maximum stamping die size with automatic clamping 900 x 1300 mm. Safety bars are much more extensive and more robust compared to the original design, 350 tons of stamping force.

Condition: good (used), Year of construction: 1987, Used OMAG plate shear Type CEL 104 Capacity 1100 x 4 mm Tedpfjzz Ru Esx Amrec

Condition: excellent (used), Year of construction: 2014, Ref:11125 . Fotoba XLD 170 + Fotoba REW 104 Slitter Rewinder. 2013 Fotoba XLD 170 High speed cutter. Primarily used for digitally printed wallpaper up to a maximum thickness of 0.8 mm. Including polycarbonate, photo paper, vinyl, self adhesive vinyl, PVC, film, Duratrans, TDF, canvas, laminated or encapsulated prints, etc. Using cut marks generated by the RIP and with 'True Image Edge Tracking', the cutting is executed with precise accuracy. The sensor automatically follows the prints. Extremely easy roll loading. 'Digitrim' function enhances the versatility of the XLD 170. Features & specification: Self squaring to the edge of the image 'X' Automatic tracking of the image edge 'Y' Memory channels to store different cut marks. All mechanisms controlled by stepper motors. Self sharpening knife system. Vertical slicers; single 8 mm double or adjustable double. Adjustable cutting lengths & quantities - accuracy +/- 1 mm (0.039") Max. linear speed: 18m / 50ft. Cutting width, Max: 170 cm (67") Min: 28 cm (11") Max. load 200kg (440 lbs), max. diameter 60 cm. 2014 Fotoba REW 104 Automatic in-line coreless rewinder. Made for non-stop industrial production. Can rewind two rolls simultaneously up to 20m long. Can wind up tiles of the same job for better logistic. Maximum roll diameter: 90 mm Maximum rolled weight: 8 kg Tedpfx Amjzmx Nuorec

Condition: good (used), Year of construction: 2005, functionality: fully functional, Technical details x-travel 1040 mm y-travel 600 mm z-travel 500 mm Control Heidenhain iTNC 530 table surface area 1250 x 600 mm table load 600 kg tool taper SK 40 spindle turning speed range 1 - 8000 U/min max. torque on the spindle (S1/S6) 140/200 Nm feed range 40000 mm/min rapid power traverse in X-and Z direction 70 m/min Tsdpfsz D Aqujx Amrjc rapid motion - y-axis 40 m/min spindle drive (100/40 % ED) 13/19 kW total power requirement 39 kVA weight of the machine ca. 8,9 t Additional information Operating hours 70294 Spindle hours 23335 Please note the enclosed geometry measurement report with the tool pull-in force measurement. Equipment: CNC control Heidenhain iTNC 530 Electronic handwheel Heidenhain HR 410 Motor spindle with increased torque Direct path measuring system in Y-Z axis Preparation for measuring probe 30-station tool changer, tool diameter 100/140 mm, length 300, weight 7 kg ROTOCLEAR Production package 2 Internal coolant supply through the spindle 20 bar Coolant system with paper belt filter Cooling device blown air through the spindle center selectable via M function Chip conveyor Bed flushing Linear drive in the X-axis Operating mode 4 Program check with extended manual intervention Machine documentation Transport dimensions: 4100 x 2500 x 3000 mm

Condition: used, Year of construction: 2002, Second-hand machine Year of manufacture: 2002 Table size 580 x 280 mm Drilling table height: 800 mm Drilling depth: 150 mm Drilling length 225 mm with Wescott drill chuck 0–20 mm Height adjustment: 120 mm Swivel range of drilling unit: 2 x 45° with 2 eccentric clamps with one-hand operation with dowel drilling device Tedszk Nupjpfx Amrsc with dial gauge in the handwheel with digital display with 2 speeds: 1,400 and 2,800 rpm with travel mechanism LxWxH 850x1000x1050 mm Weight approx. 240 kg Availability: at short notice Storage location: Flörsheim

Condition: reconditioned (used), Year of construction: 1999, functionality: fully functional, Two-jaw drill chuck, 2 hand-operated eccentric clamps, dial indicator in the handwheel, 2 speeds 1400 – 2800 rpm. The machine has been fully overhauled and newly adjusted at our facility. Tedpfsyzc E Sex Amroc

Condition: good (used), functionality: fully functional, Year of construction: 1987, Used small hydraulic plate shear from OMAG Todpfxjzk Akde Amrjc Type: CEL 104 Capacity: 1050 x 4 mm Electric back gauge Year of manufacture: 1987

Condition: ready for operation (used), Veneer Lathe manufactured by Rau-te in Finland. Type 104" Tjdpfxozy Ui Do Amroc Dimension veneer sheets: Length 2.62 m. Minimum width 0.5 meter Infeed loading system included. There is also a complete out feed system included ofter the Veneer lathe with acceleration conveyor, veneer cutting knife and veneer stacker. A second veneer lathe Raute 66” is also available with in- and out feed system. Dimension veneer sheets: Length 1.00 m to 1.65 m. Minimum width 0.5 meter

Condition: used, Year of construction: 1991, cutting width 280 mm Cutting height 150 mm Motor output 2 x 4,0 kW saw blade 420 x 30 mm Cutting length 6000 mm Tjdpjzughbjfx Amroc speeds 2800 U/min air pressure 7 bar weight of the machine ca. 1750 kg dimensions of the machine ca. 7550 x 1600 x 1450 mm Furnishing: - Control E 255 - Extraction ESTA DUSTOMAT-22 Bj. 1998 - roller conveyor - 2x saw blade 120 x 4.0 x 30 Z96

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Manufacturer: Jagenberg Machine type: Folder-gluer with automatic packing machine Model: Diana 104-1 + Japack 40-2 Year of manufacture: FKM 1997, overhauled 2020 Year of manufacture: Automatic packing machine 1985, overhauled 2020 Location: 41751 Viersen, North Rhine-Westphalia Format range: min. 50 mm, max. 1,040 mm Equipment of the Diana 104-1: - Pre-breaking station with device for pre-breaking the 3rd creasing line - Module 150 with servo-driven overrun folding - Bottom gluing unit with 5 mm glue disk, including pump (for 30 l hobbock) - Folding station Todpfjrnkwrsx Amroc - Threading station / central transport - Transfer station - Pneumatic collecting/pressing device - Digital position sensors - Electronic control system, including counter and start/stop removal control Mode - Top gluing unit (model year 2021/2022) from BaumerHHS, type Xact, with 4 channels, 3 glue nozzles, touchscreen interface, job memory, including stainless steel piston pump This machine is equipped for processing side-glued folding boxes, lock-bottom boxes, single-fold folding boxes, and 4-point erectable boxes. A compressor is not included. Other: The machine is in very good condition, ready for operation, and can be inspected during production upon request. Availability: Immediately We look forward to your inquiry. Your WS Quack + Fischer Team