Used Stas V- 8.90 Light 49M³ Gmp for sale (51,747)

Condition: used, axle configuration: 3 axles, first registration: 06/2024, loading space length: 8,900 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, loading space volume: 49 m³, Lightweight chassis version Made of aluminum (15-6-12) Two fully automatically welded I-beam longitudinal members with welded cross members. Chassis width 1,600 mm Axles and suspension: 430 mm disc brake "off-road version" JOST (formerly DCA) axle assemblies, 3 x 9 tons with air suspension, air bellows in a central arrangement on the chassis longitudinal member. 1st axle can be lifted with starting aid and manual forced lowering, Smart Board infocenter, lift/lower valve, BVA brake wear indicator Tires and wheels: 6 wheels with tires size 385/65 R 22.5, approximately 60% tread, with steel rims 11.75 x 22.5 ET 120, universal wheel bolts for aluminum rims Kingpin: 2" screwed into an 8 mm thick plate "light" Landing gear: Landing gear with two speeds, 2x 20 tons support load for air suspension, we use swivel feet Braking system: According to E.E.G. standard, dual-line system Wabco, spring-loaded parking brake acting on two axles and Wabco EBS-E incl. RSS (Roll Stability System), Wabco Smartboard Infocenter, Aluminum air tank system Electrical system: According to STVZO guidelines with 2 five-chamber lights type Aspöck, 24-volt system with 2x7 and 1x 15-pole socket with side marker lights, 2 separate LED reversing lights Nodpfx Abe Adxg Ss Asdc 1 LED work light inside at the front All air and electrical lines are neatly routed in plastic pipes! Tipping body/dump body: interior fully welded Aluminum dump body, side walls 30 mm thick plank profiles (2-3 mm) 600 mm wide, welded, floor 6 mm thick, highly wear-resistant alloy (5383H34/HB 110) with 45-degree angled profile to the side wall, front wall 4 mm thick, reinforced in an angled design, rear wall as a universal door in a straight design with 2-wing doors in a 2/3-1/3 design with a grain slide, ALURound profile for sealing the door gap on the rear doors, welded on the side and bottom, rear doors partially clad with aluminum, operation of the universal door automatically-pneumatically with a separate lever, lockable, rear supports made of aluminum, swivelable, two lower retainers with rubber buffers on the tipping body attached to the frame on the front wall Hydraulic system: tipping cylinder with "small" housing, suspension Hydraulic cylinder mounted on the front wall with a working pressure of 150 bar, manufactured by Edbro with approximately 2.5 m hydraulic hose and male coupling 1", tipping angle approx. 48 degrees Accessories: 6 Parlok fenders, complete splash guards over the entire vehicle width attached to the U-shaped protection, without spare wheel holder, aluminum, side underrun protection on the right in foldable design, toolbox type 860 large, approx. 3 m aluminum ladder, 3 aluminum swivel supports in the middle, raised by approx. 150 mm, additionally, a centrally mounted support receiver for positioning a total of 2 supports to increase the loading width, tarpaulin with a central light strip and separate reinforcements in the wear areas, quality approx. 660 g/m2 with tarpaulin system, continuous rubber cord in the rear end of the tarpaulin to be attached to two tension hooks on the swivel support at the rear, walkway on the frame in chassis color, tarpaulin closure with quick-release fastener, tarpaulin end at the rear with welded rubber cord against water ingress, robust foldable underrun protection in aluminum, 2 "Clear- Pass" splash guards on the fender according to EC standard, an aluminum grain chute with tarpaulin bag attached to the side on the frame, holder for shovel, broom and scrape

Condition: used, axle configuration: 3 axles, first registration: 10/2023, loading space length: 8,900 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, loading space volume: 48 m³, Lightweight chassis version Made of aluminum (15-6-12) Two fully automatically welded I-beams with welded crossmembers. Chassis width 1,600 mm Axles and suspension: Disc brake 430 mm "off-road version" JOST (formerly DCA) axle units, 3 x 9 tons, with air suspension, air bellows arranged centrally to the chassis longitudinal beam, 1st axle liftable with starting aid and manual forced lowering, Smart Board info center, lifting/lowering valve, BVA brake wear indicator Tires and wheels: 6 wheels with tires size 385/65 R 22.5, approx. 60% tread, with steel rims 11.75 x 22.5 ET 120, UNI wheel bolts, aluminum rims Kingpin: 2" - screwed into an 8 mm thick plate "light" Landing gear: Landing gears with two speeds, 2x 20 tons support load. We use swivel feet for air suspension. Braking system: Ndedpfx As Adxg Ejb Aoc According to E.E.G. standard, two-line system Wabco, spring-loaded parking brake acting on two axles and Wabco EBS-E incl. RSS (Roll-Stability System), Wabco Smartboard info center, Aluminum air tank system Electrical system: According to the guidelines of the STVZO (German Road Traffic Licensing Regulations) with 2 five-chamber lights, type Aspöck, 24-volt system with 2x 7 and 1x 15-pole socket with side marker lights, 2 sep. LED reversing lights 1 LED inside on the front wall All air and electrical lines are neatly routed in plastic pipes! Tipping body/dump bed: Fully welded interior Aluminum dump bed, side walls made of 30 mm thick plank profiles (2-3 mm) welded together, 600 mm wide, bottom made of 6 mm thick, highly wear-resistant alloy (5383H34/HB 110) with 45-degree angled profile to the side wall, front wall reinforced, 4 mm, in an angled design, rear wall as a universal door in a straight design with 2-wing doors in a 2/3-1/3 design with a grain slide, ALU round profile for sealing the door gap welded to the rear doors on the side and bottom, rear doors partially covered with smooth aluminum, operation of the universal door automatically-pneumatically with a separate lever that can be locked, rear support outriggers made of ALU, swiveling, two tie-down straps with rubber buffers attached to the frame on the front wall of the tipping bed, Hydraulic system: Tipping cylinder with "small" housing Hydraulic cylinder mounted on the front wall with a working pressure of 150 bar, manufacturer Edbro with approx. 2.5 m hydraulic hose and coupling half 1", tipping angle approx. 48 degrees Accessories: 6 Parlok fenders, complete splash guards over the entire vehicle width attached to the U-shaped protection, without spare wheel holder made of aluminum, side underrun protection on the right in a foldable design, toolbox type 860 large, approx. 3 m aluminum ladder, 3 aluminum swivel supports in the middle, raised by approx. 150 mm, additional centrally mounted support holder for positioning a total of 2 supports to increase the loading width, tarpaulin with a central light strip and separate reinforcements in the wear areas in approx. 660 gr./m2 quality with tarpaulin system, circumferential rubber cord in the rear end of the tarpaulin to be attached with two tension hooks on the swivel support at the rear, walkway on the frame in chassis color, tarpaulin closure with quick-release fastener, tarpaulin end at the rear with welded rubber cord to prevent water ingress, robust foldable underrun protection made of aluminum, 2 "Clear- Pass" splash guards on the fender according to EG standard, an aluminum grain chute with a tarpaulin bag attached to the side

Condition: used, axle configuration: 3 axles, first registration: 09/2008, loading space length: 9,700 mm, loading space width: 2,350 mm, loading space height: 2,165 mm, loading space volume: 50 m³, Chassis ALU chassis, aluminium alloy 5383H34 Two fully automatically welded T-profiles (width 200 mm) Corrosion protection between steel and aluminium components, continuous rubber bonded under pressure onto the longitudinal beams for maximum stability via integrated tipping bearing shaft with wear-resistant, pressed-in special bushes, chassis width approx. 1,600 mm, air and electrical lines integrated in a plastic conduit. Njdpfxs Adxhij Ab Aodc Axles and Suspension, Disc Brakes Jost-disc axle assemblies 3 x 9 tons with DCA air suspension, lift and lower valve, load pressure gauge, 3rd axle automatically liftable Tyres and Wheels 6 wheels fitted with 385/65 R 22.5 tyres approx. 50–60% tread remaining, on silver steel rims, 11.75x22.5 ET 120 Landing Gear Mechanical support legs, 2 x 20 ton load capacity, pivoting feet used for air suspension systems Brake System In compliance with EC standards, dual-circuit Wabco system, spring-loaded parking brake acting on two axles, EBS-E system Wabco 2S/2M, with RSS system (Roll Stability Support), aluminium air tanks Electrical System According to German Road Traffic Licensing Regulations (StVZO) with two five-chamber Aspöck LED lights, 24V system with two 7-pin and one 15-pin sockets at front, EBS socket, LED side marker lights, 2 clearance lights, 2 separate LED reversing lights Tipping Body / Bin ALU bin, side walls with welded vertical aluminium profiles, floor approx. 6 mm thick wear-resistant aluminium alloy (5383H34), Brinell HB 110, front wall sloped design in 4 mm ALU with reinforcement profiles for tipping cylinder mount, side walls in 3 mm hard alloy, straight rear wall, universal door with automatic-pneumatic (lockable) swinging and 2/3-1/3 split hinged tailgate, double linkage, manufactured from 4 mm aluminium, 1 grain chute with water protection, wear plates on sides approx. 400-1,000mm x 3,000mm x 4mm Hydraulic System Hydraulic cylinder mounted on front wall with working pressure 150 bar, make: Edbro, with approx. 2 m hydraulic hose and 1" loose half-coupling Accessories 6 Parlok plastic mudguards with 2 Stas mud flaps, 3 m aluminium ladder, reinforced underrun protection in folding execution with 2 towing eyes, 1x folding side guard, walkway on front wall with side access ladder (left), 3 ALU hoops in pivoting design, 1x centre hoop support, rolling tarpaulin with central aluminium tube, rolling tarpaulin system, tarpaulin approx. 660 g/m², quick-release fastener (without tension belts), wheel spanner, 2x wheel chocks, toolbox type 800, continuous splash guard mounted on underrun protection, etc. Offer and pictures subject to change.

Condition: used, mileage: 3,000 km, power: 125 kW (169.95 HP), color: grey, gearing type: automatic, emission class: euro6, number of seats: 9, Equipment: ABS, air conditioning, central locking, - To ensure you receive the best possible advice from us, we kindly request that you schedule an appointment. Mr. Kiel will be happy to assist you. Tel: Optional equipment: A50 Front axle with increased load capacity, BH1 HOLD function, CK8 Steering wheel heating, CL3 Leather steering wheel, CM0 Painted bumpers, EY2 Digital extra: Live Traffic Information, E1E Digital extra: Hard disk navigation, E43 Trailer socket 13-pin, FF0 Coat hooks in the passenger compartment, FG8 Cupholders front, FJ5 Folding cover for storage compartments left and right, FM3 WET WIPER SYSTEM, FY7 Multi-button remote control, G43 9G-TRONIC, H04 Thermal insulation driver's cabin, H08 Reinforced roof air conditioning, H12 Hot water auxiliary heating, H13 Additional heater for the rear, H15 Seat heating for passenger, H16 Seat heating for driver, H21 Heat-reflecting glass with band filter on the windshield, JA9 Traffic sign assistant, JB7 Parking package with rearview camera, LB9 Exit lights, LG7 LED High Performance headlights, L1D Roof control unit with bus interior light control, L22 Rear lights with partial LED technology, M61 Generator 14 V / 280 A, P3Z Winter package Plus, RH2 Tires 235/65 R16 C, SB2 Comfort passenger seat, T55 Electric actuation for sliding door on the right, U26 Pre-installation for seat configuration 2/2/3, U60 2-seater bench seat in the 1st row in the rear, U61 2-seater bench seat in the 2nd row in the rear, U64 3-seater bench seat in the 3rd row in the rear, U74 Armrests on wall side, U75 Armrests on aisle side, VA5 Full paneling of rear swing doors, V21 Interior paneling luxury, V31 Window pillar paneling, V4A Full paneling of right rear sliding door, W70 Tinted glass in the rear, black glass Standard equipment: Nedjzwlqaopfx Ab Aodc AR2 Axle ratio i = 3.923, BA3 Active brake assist, CB1 Suspension for comfort and cargo protection, CB7 Stabilization level I, CL1 Steering wheel adjustable in inclination and height, CN2 Radiator grille frame in vehicle color, CT1 Vibration damper, CW2 Deletion of vehicle lowering, C6L Multifunction steering wheel, D03 High roof, ED4 Fleece battery 12 V 92 Ah, ES0 Jump start assist, ES2 12 V socket in trunk / cargo area, ES5 Charging package dashboard, EW6 Digital extra: Remote Services Plus, EY5 Mercedes-Benz emergency call system, EY6 Breakdown management, E07 Hill start assist, E1D Digital radio (DAB), E1U USB socket 5 V, E30 Battery main switch single-pole, E4S Digital extra: Smartphone integration, E7M MBUX multimedia system, FF5 Storage compartment above windshield, FJ1 Folding cover for storage compartment, FJ4 Storage compartment under cockpit, F61 Interior mirror, F64 Exterior mirror electrically foldable, F68 Exterior mirror heated and electrically adjustable, HH2 Electric auxiliary heating with warm air, HH9 Semi-automatic controlled air conditioning TEMPMATIC, H00 Warm air duct to passenger compartment, H1I Wide-angle nozzles in I-panel, H22 Heated rear window, JA7 Blind spot assist, JA8 Crosswind assist, JB4 Active lane keeping assist, JF1 Rain sensor, JH3 Communication module (LTE) for digital services, JK5 Instrument cluster with color display, JK8 Driver camera, JW8 ATTENTION ASSIST, J10 Speedometer km/h, J55 Seatbelt warning for passenger seat, J58 Seatbelt warning for driver's seat, J65 Outside temperature display, KB7 Main fuel tank 93 liters, LA1 High beam assist, LA2 Headlamp assist, LB1 Lateral marker lights, LB5 3rd brake light, LC4 Comfort roof control unit, LE1 Adaptive brake light, L21 Reversing ligh

Condition: used, first registration: 09/2019, STAS 3 - Full Aluminum Axle - Grain Tipping Trailer SHAKER / VIBRATOR!!! • ABS • EBS Ndjdpfx Aoz Ezu Iob Aec • WABCO SmartBoard • ALCOA rims • 3 x air-suspended 9-ton JOST / SAF axles • Lifting/lowering system • Lift axle (1st axle) • GVWR: 39,000 kg • Tare weight: 5,710 kg • Payload: 33,290 kg • Tire size: 385 / 65 R 22.5 • Tire tread: 80 - 90%! • Platform • Roller shutter • Work lights • Pneumatic rear door release • Automatic / pneumatic venting during tipping • Overall trailer length: 10,227 mm • Volume: 55 cubic meters - 1st owner - German trailer - TÜV (technical inspection): new! Errors and prior sale excepted! = Further information = Year of manufacture: 2019 Tare weight: 5,710 kg

Condition: like new (used), Year of construction: 2020, functionality: fully functional, GMP Roller Laminator EXCELAM-II 355 Q Working width 355 mm, hot lamination Laminator for hot lamination films from 32 - 175 microns Infrared-heated silicone rollers, ensuring scratch-free lamination Equipped with an 8-bit microprocessor LCD display and electronic reverse function, standby function Temperature adjustable from 0-160 °C in 1°C increments Temperature and speed settings are pre-programmed for each film thickness The roller pressure can be precisely adjusted for each film thickness using a scale disc Nedszwwqlspfx Ab Aodc Max. passage height: 5 mm Adapter for 25 mm core diameter Working speed: 0-1.6 m/min, adjustable in 9 steps Connection: 220 V / 50 Hz / 1300 Watts Dimensions: W546 x D456 x H285 mm Weight: 25 kg

Condition: used, axle configuration: 3 axles, first registration: 09/2009, suspension: air, Year of construction: 2009, Equipment: ABS, = Additional options and accessories = - EBS - Rear doors - Air suspension = Additional information = Suspension: Air suspension Unladen weight: 6,315 kg Payload: 32,685 kg GVWR: 39,000 kg Tipping: Rear Vehicle number: Tipping semi-trailer: 16 Stas S339CX / Thermo, full aluminum / 28 m³ .: YE6S339CX90000429 F.1 Technically permissible total weight in kg: 39,000 G Unladen weight: 6,315 kg Full aluminum 28 m³ No liability for printing and typographical errors, changes, prior sale and errors! = Company information = No liability for printing and typographical errors, changes, prior sale and errors! Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Ndodpfx Abjzwwqrs Ajc Tel.: Mobile: Ms. Sabine Faust Email:

Condition: used, maximum load weight: 32,950 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 06/2024, loading space length: 10,450 mm, loading space width: 2,480 mm, loading space height: 2,100 mm, loading space volume: 54 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2024, Equipment: ABS, 3-Axle Stas S 300CX Tipping Semi-Trailer VIN: 080246 Chassis / Components: * Air suspension / Raise and lower function * Lift axle, 1st axle * Weweler supports * WABCO Smart Board * Alcoa aluminum rims * Tires: 385/65 R.22.5 * Remaining tire tread: 1=90% 2=like new 3=90% * 3 x Jost axles with disc brakes * 2x PVC storage box * 2x Work lights Nedpfx Aboyl N N De Ajdc * Aluminum chassis Body: * Tipping semi-trailer * Hyva tipping cylinder, max. 220 bar * Volume: approx. 54 m³ * 2x pneumatic locking * Roller cover * Standing platform at the front * Portal doors 50:50 Weights: * Gross weight: 39,000 kg * Payload: 32,950 kg * Tare weight: 6,050 kg Other: * German registration * New MOT / safety inspection available upon request New main inspections / safety checks or weight reductions/increases are available upon request. We will gladly assist you in obtaining export/transfer license plates, and we can also arrange for the transportation of your purchased vehicles within Germany. Contact us!---- We speak the following languages: German, English and Russian!---- No liability for printing and typographical errors, changes, prior sale and errors reserved!----Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl on the Rhine. Thanks to our many years of experience in the preparation and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. On 11,000 m², you will find a wide variety of vehicles. Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them with the purchase or sale of vehicles. Convince yourself! Our services for you: Loading of vehicles We will gladly assist you in loading your purchased vehicles. Organization of special transports We will gladly assist you in organizing special transports. Temporary registration / Export license plates We will gladly assist you in obtaining export license plates/short-term registration. Handling of customs formalities We will gladly assist you in handling customs matters.

Condition: good (used), mileage: 424,041 km, power: 355 kW (482.67 HP), first registration: 05/2023, fuel type: diesel, tire size: 315/70R22,5, axle configuration: 4x2, wheelbase: 4,100 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 6,300 mm, total width: 2,550 mm, total height: 3,840 mm, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, parking air conditioner, parking heater, power mirror, retarder, seat heater, tachograph, traction control, = Additional Options and Accessories = Nsdpfx Absz N Sp Ss Aedc - Heated mirrors - Carplay - Digital tachograph - Fixed - LED lamp - Manual - Radio/cassette - Lane keeping assist - Fabric - Super Space Cab - Auxiliary braking system = Notes = Number of axles: 2, Configuration: 4x2, Tare weight: 7842 kg, Gross vehicle weight: 19500 kg, Total tank capacity: 845 liters, Fifth wheel height: 117 cm, Fifth wheel: Fixed, Number of locks: 1, Suspension type: Air suspension, Type of cab: Super Space Cab, Cruise control, Tachograph (recording device), Digital tachograph, Air conditioning, Stationary air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Radio/cassette, Carplay, Color: White, Heated mirrors, Type of lighting: LED lamp, Lane keeping assist, Air conditioning, Seat heating, Bluetooth, Engine power: 355 kW (476 Hp), Engine displacement: 12902 cc, Fuel: Diesel, Euro: 6, Transmission type: AS-Tronic, Transmission type: ZF, Gears: 12, Auxiliary braking system, Retarder brand: Retarder, Power steering, ABS, ASR, Central locking, Seat arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Manual, 424,000 km, Intarder, LED side skirts, Full spoiler, Stand-alone air conditioning! = Further Information = Transmission Transmission: ZF, 12 gears, Automatic Axle Configuration Tire size: 315/70R22.5 Brakes: Disc brakes Axle 1: Steered; Tire tread depth left: 4 mm; Tire tread depth right: 3 mm; Suspension: Leaf spring suspension Axle 2: Double tires; Tire tread depth left inner: 6 mm; Tire tread depth left outer: 5 mm; Tire tread depth right inner: 5 mm; Tire tread depth right outer: 5 mm; Suspension: Air suspension Weights Tare weight: 7,842 kg Payload: 11,658 kg GVW: 19,500 kg Condition Technical condition: good Optical condition: good Damage: none Number of keys: 3 Financial Information Leasing price: €898 per month (default, 60 months); Ask for more information and terms Identification License plate: KLEYN1 = Company Information = Kleyn Trucks is one of the largest independent used vehicle dealers in the world. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • A good price • Correct business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration can be arranged quickly • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete stock list: Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an inquiry via our website. Ask directly about our European warranty package.

Condition: good (used), Equipment: 3rd hydraulic function, ATP certification, *Title:* HYTORC B10-ST4 Vestas Set + RS12 Stealth Power Head + ENERPAC Pump - with documents - TOP *Description:* Selling a complete HYTORC hydraulic torque wrench set for Vestas wind turbines from a private collection. Ndedpfx Aj Aazbdsb Aoc *Scope of delivery:* - 1x HYTORC STEALTH Power Head RS12 / RSL2-70A (1000 series) - 3x HYTORC B10-ST4 cassettes 46mm - TIGHTEN - Vestas No. VT20019281 - 1x ENERPAC hand pump P-series 700 bar with hoses - All documents / calibration certificates available - ready for immediate use in wind farm service Condition: Used, fully functional. No case included. Private sale from Hungary - shipping within the EU is possible. *Price: 7,000 EUR negotiable*

Condition: good (used), Year of construction: 2021, functionality: fully functional, PUR melting device for aluminum pouches/cartridges, with hose and filling head for use on edge banding machines Weight approx. 73 kg Melting capacity up to 2 kg Gear pump All heaters can be adjusted separately With electronic interface for glue level detection in the gluing section of the edge banding machine (level sensor "Tippkemper" for glue application, provided by the edge banding machine manufacturer) Connection value 400 V, 50 Hz, 3Ph, N Nsdpfx Absy S Rw Rs Asdc Device delivered completely cleaned and with PUR cleaner.

Condition: used, maximum load weight: 29,990 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2024, loading space volume: 52 m³, total width: 2,550 mm, Year of construction: 2024, Equipment: ABS, Chassis type: V-Chassis Kingpin load National (t): 12 Axle load National (t): 8 Axle spacing (mm): 1310-1310 Fifth wheel height (mm): 1150 Chassis width (mm): 1400 Loading width (mm): 2475 Chassis series: 090 Technically permissible total weight: 39=12+9+9+9 Internal height front (mm) (IHF): 2165 Internal height rear (mm) (IHB): 2165 Volume (m³): 51.8 Overall width (mm): 2550 Wheelbase (mm) (WB): 6800 Overall length (mm): 10656 Chassis Chassis material: Aluminium Tire size: 385/65R22.5 Loading length (mm): 9665 Axle manufacturer: JOST (STAS manufacturer choice) Wheel offset (ET): 120 Option: 1st axle with lift axle and traction aid Activation of traction aid via button in the truck (installation of button not included in standard equipment) and by pressing the brake pedal three times Option: 3rd axle with lift axle and Optiturn Activation of additional lift axle control via Wabco Smartboard Brake pad wear indicator connected Tire pressure monitoring: Wabco Trailerpulse Air suspension: ECAS with lift and lower valve Automatic lowering of air suspension during tipping operation, can be manually locked via Smartboard as well as via switch on the chassis Pneumatic coupling head: European palm coupling Tire brand: Manufacturer's choice Wheels: Alcoa Dura Bright Type of tires: Regional distance Wheel nuts: Open Wheel nut caps: Chrome with STAS logo Landing gears: Weweler, steel gearbox landing gears, type Weweler, with compensation feet, single-side operation and 2 speed levels Underrun protection operation: Manual Mudflap underrun protection: Black with STAS logo, mounted across the full width of the underrun protection Mudflap underrun protection attachment: Fixed Underrun protection cover: With covers Handle on underrun protection Control console: EBS control on the left in direction of travel, in front of the axles Toolbox Position toolbox: Left in direction of travel, in front of axles Njdpfx Abeupqi Eo Asdc Toolbox material (left, in front of axles): Plastic Toolbox dimensions (left, in front of axles): 860x520x500 Fender type: Domar STAS with white line Number of mudflaps on fender: 2 pcs Fender mudflap type: Clear Pass Lighting manufacturer: Aspöck Lighting type: ECOLED II Work lights (activated by switch): 2 pcs LED reversing lights at rear left and right, mounted on the last cross member of the chassis (controlled by reversing signal) Work light position (activated by switch): 2 pcs LED reversing lights left and right at the front in direction of travel, mounted in the area of the landing gears Tipping cylinder manufacturer: Hyva (STAS manufacturer choice) Type of tipping cylinder: Hydraulic cylinder with large casing Tipping cylinder angle: Normal ±47° Tipping cylinder model: Hyva - FC 169 Tipping cylinder stroke: 7130 Tipping cylinder max. pressure: 250 Cylinder stage surface treatment: Standard treatment Hydraulic coupling: Rotary coupling Hydraulic coupling size: 1 Hydraulic coupling gender: Female Hydraulic coupling hose: 2,500 mm Smartboard type: Standard Air connection: Left in direction of travel, on lamp bracket Aluminum access ladder: 3 m - right in direction of travel Mounting of access ladder: for rear entry with hooks for hanging Broom and shovel holder: Three holders each, mounted on the chassis to the left in direction of travel Two plastic wheel chocks incl. holder Chassis-to-body securing device: Rubber cushions (not for FSS 74 and 86) Air and electrical console: Mounted on the right in direction of travel Body A-board on tipper (not f

Condition: used, Year of construction: 2011, functionality: fully functional, SEMI AUTOMATIC CASE MAKER MACHINE DARIX EVOLUTION LIGHT Ndodpjw Inytjfx Ab Aec

Condition: used, axle configuration: 3 axles, first registration: 09/2025, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,825 mm, loading space volume: 93 m³, Chassis: Reinforced, continuous chassis design, new. Superstructure: Self-supporting design with corresponding reinforcements in the lower belt for particularly high stability and strength. Crossmembers, 140 mm high, reinforced design for high ground load. Additional reinforcement as a gusset plate in the front lower belt/vehicle frame area. Chassis made of galvanized steel up to the support structure. (Semi-trailer construction max. GVWR up to 39,000 kg) Nedpfx Aez S St Ajb Asdc Axles and Suspension: Disc brake 22.5". Jost (DCA) axle units, 3x9 tons with DCA air suspension, lifting and lowering function, Wabco Smartboard, electronic brake wear indicator (BVA) readable in the central control unit (display), 1st and 3rd axle lift including Optiturn and Optiturn. 1st axle with starting aid (without central control unit), tire pressure monitoring Wabco Trailerpulse with ZF rim-mounted sensors. Tires and Wheels: 6 wheels with tires size 385/65 R 22.5 according to manufacturer's choice (Br-Go-Co) on steel rims, silver, 11.75x22.5 ET 120. King Pin: 2" bolted into a 10 mm thick plate. Braking System: According to EC standard, EBS E-system Wabco with RSS system (Roll Stability Support) and premium modulator. Spring brake system acting on two axles with operation at the rear. Aluminum compressed air system. Electrical System: According to the guidelines of EC standards 91/633 and 97/28 with 2 five-chamber lamps, type Aspöck Eco LED 3, integrated in the aluminum rear panel. 24-volt system with 1x15-pole and 2x7-pole socket, with side marker lights in LED design, 2 reflective panels on the rear, position lights at the front 2x white, rear 2x red, 2 separate LED reversing lights integrated in the U-profile. Audio alarm when reversing. Superstructure/Body: Body fully welded inside. Reinforced side walls. Front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn. Aluminum body, side walls made of 30 mm thick aluminum plank profiles (2-3 mm), 600 mm wide, completely welded with upper and lower belt. Plank profiles fully welded inside. Floor laid as a sliding floor system on 140 mm aluminum crossmembers, floor load capacity approx. 9 tons/m2. Crossmembers mounted close together (approx. 350 mm). Aluminum front wall with 600 mm plank profile 2-3 mm thick in a straight design. Special aluminum corner profiles in a beveled design. Smooth rear wall in a straight design with 2 aluminum wing doors, 50/30 mm thick, with 2 swivel rod locks, mounted in the welded aluminum rear frame on Teflon and stainless steel bearings. Doors secured in the open position with one chain each on the side. Hard wear plates on the side walls, approx. 2,000x1,500x4mm, fully welded. Sliding residual discharge wall with Kevlar sheet, approx. 1,800 mm long, plus side Kevlar sheet seal. Service door on the left in the front wall, opening inwards. Hydraulic System: "Cargo - Floor" sliding floor system. Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE-HD sliders plus anti-lifting slide bearings, type CF 10 mm floor design. Hydraulics with approx. 200 mm working stroke. Fixed brackets on the front wall. Separate possibility for connecting the hydraulic line under the vehicle with fixed brackets. Line size NW 21. Fixed brackets with dimensions and design to be specified. Operating pressure 190-max. 240 bar. Aluminum end pieces welded into the sliding floor. Electrical control integrated in a lockable, watertight box on the l

Condition: ready for operation (used), Year of construction: 2018, Medium: demineralized feed water (Aqua Purificata), max. vessel operating pressure: 5bar, max. temperature: 200°C, vessel volume: 300l, test pressure: 8.68bar, steam output: 300kg/h. The steam generator was designed as part of an overall system, however it has its own control and automation and can be used in separate operation. Documentation available. An on-site inspection is possible. Ndjdpjygmb Tofx Ab Aec

Condition: new, axle configuration: 3 axles, loading space length: 8,880 mm, loading space width: 2,475 mm, loading space height: 2,165 mm, loading space volume: 47 m³, total length: 10,259 mm, total width: 2,550 mm, total height: 2,165 mm, Year of construction: 2026, Equipment: ABS, Equipment: * Chassis material: Aluminum * Chassis type: V-chassis * Fifth wheel load National (t): 12 * Axle spacing (mm): 1310-1310 Nodpfx Aey Dmvmob Aedc * Saddle height (mm): 1175 * Chassis width (mm): 1400 * Loading width (mm): 2475 * Chassis series: 080 * Internal height front (mm) (IHF): 2165 * Internal height rear (mm) (IHB): 2165 * Loading length (mm): 8880 * KC-Value: 0400 * Overall width (mm): 2550 * Volume (m³): 47.5824 * Wheelbase (mm) (WB): 5800 * Overall length (mm): 10259 * Chassis * Axles, brakes and suspension * Axles: SAF * Offset (ET): 120 * Option: 1st axle with lift axle and traction aid * Option: 3rd axle with lift axle and Optiturn * Activation of additional lift axle control via Wabco Smartboard * Brake pad wear indicator * Return-to-ride (RTR): 15 km/h * ECAS air suspension with lift and lower valve * Automatic lowering of air suspension during tipping, can be manually locked via Smartboard and switch on the chassis * Pneumatic coupling head: European palm-type coupling * Operation console: EBS controls on the left in direction of travel, ahead of the axles * Standard Smartboard * Air and electrical console on the right in direction of travel * Landing gears: Weweler steel gearbox-type landing gears with compensating feet, single-sided operation and 2-speed * Tire dimension: 385/65R22.5 * Tire pressure monitoring: Wabco TrailerPulse * Rims: Alcoa Dura-Bright * Tire type: Regional distance * TPMS sensor type: Rim-mounted sensor * TPMS sensor * Chrome lug nut covers with STAS logo * Work light position (operated by switch): 2 LED reversing lights at rear, left and right in direction of travel, mounted on lamp bracket * Work light position (operated by switch): 2 LED reversing lights at front, left and right in direction of travel, mounted at landing gear area * LEDs in door end cross member: 2 x 3-function LED * Underrun protection operated manually * Tow eyes: 2 each left and right * Splash guards on underrun protection: Black with STAS logo * Cylinder tipping angle normal ±47° * Tipping cylinder model: Hyva - FC 169 * Tipping cylinder stroke: 6480 * Tipping cylinder max. pressure: 250 bar * Cylinder stage surface treatment: Standard surface * Hydraulic coupling: Swivel coupling * Hydraulic coupling - size: 1 * Hydraulic coupling - gender: Female * Hydraulic coupling - hose: 2,500 mm * Mudguard type: Domar STAS with white stripe * Number of splash flaps on mudguard: 2 pcs * Mudguard splash flap type: Asphalt * Toolbox: 860x520x500 mm * Aluminum access ladder, 3 m - right side in direction of travel * Broom and shovel holder * Ferry lashing rings * 2 lashing eyes at rear of the chassis * Two plastic wheel chocks * Retention device chassis to body: rubber polyp Body: * Front wall angle (°): 20 * Rear wall angle (°): 90 * Inner lower belt profile angle (°): 45 * Front wall: 4 mm (aluminum) * Side wall profile: 3 mm - 2 mm * Floor: 8 mm ALU - 110 Brinell * Rubber pads installed below floor cross members * Rear wall: Kombi-door type * Kombi-door type: 2/3 - 1/3 with swiveling end cross member * Door wing opening: right wing opens first * End cross member of door: swiveling design * Hinge type: with double door joint * Slide: Rectangular design * Slide position: 1 piece in center * Grain discharge / dust bag: 1 piece grain chute incl. dust bag * Rear wall: smooth surface * Door wings secured open with chain

Condition: used, maximum load weight: 29,630 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 03/2019, next inspection (TÜV): 03/2027, loading space length: 1,055 mm, loading space width: 2,360 mm, loading space height: 2,160 mm, loading space volume: 53 m³, total width: 2,550 mm, total height: 3,829 mm, Year of construction: 2019, Equipment: ABS, 3-axle STAS S 300CX aluminum tipper body, MultiSTAR-V100 VIN: 000737 Chassis / Components: * Air suspension / Raise and lower function * Lift axle, 1st axle * Jost support legs * WABCO Smart Board * Alcoa Dura Bright aluminum rims * Tires: 385/65 R.22,5 * Remaining tire tread: Front ~60/50%, Rear ~90/80%, Trailer ~90% * 3 x SAF tridem axles with disc brakes * 1 x PVC storage box * 2 x work lights * Aluminum chassis Body: * Aluminum box tipper body * EDBRO front supports * Volume: approx. 53 m³ * Floor plate 8 mm * Fixed walkway, access on the left side * Combination door, opens to the left + swing * Manual locking * Roll cover * Extendable rear ladder under the tipper body Njdjyw Dntopfx Ab Aedc Weights: * Gross vehicle weight: 36,000 kg * Payload: 29,630 kg * Tare weight: 6,370 kg Other: * German registration * 1 previous owner * Valid MOT (technical inspection) New main inspections / safety checks or weight reductions / increases are possible upon request. We will gladly assist you in obtaining export / temporary registration plates; transportation of your purchased vehicles within Germany is also possible. Contact us! We speak the following languages: German, English, and Russian! No liability for printing & typographical errors, changes, prior sale, and errors. Subject to change! Who are we? Leible Nutzfahrzeuge is a family-owned business based in Kehl am Rhein. With our many years of experience in the refurbishment and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. A wide variety of vehicles can be found on 11,000 m². Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. Convince yourself! Our service for you: Loading of vehicles We will gladly assist you in loading your purchased vehicles. Organization of special transport We will gladly assist you in organizing special transport. Temporary registration plates / export registration plates We will gladly assist you in obtaining export registration plates / short-term registration plates. Handling of customs formalities We will gladly assist you in handling customs matters.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Closing force: 635 kN Ndsds Ad Izxopfx Ab Asc Operating pressure: 206 bar Piston diameter: 200 mm Stroke: 140 mm Daylight height: 150/180 mm Heating plate dimensions: 250 x 300 mm Max. weight of the heating plates: 70 kg Oil tank: 100 l Rated power: 19.66 kW Heating power: 9.6 kW Vacuum motor power: 2.6 kW Light barrier, distance to the tool area: 270 mm Stroke of the vacuum cover: 140 mm Dimensions: 2,650 x 2,100 x 2,100 mm The vulcanizing press from the manufacturer PAN STONE, type S-V-65-2RT-PCD, was used by a renowned German company in the sealing technology and electromobility sector. This company is known for its high quality and innovation in sealing production. The machine was part of a production line responsible for manufacturing high-performance seals used in various industries. It was always professionally maintained and repaired, which explains its very good condition. This press offers you the opportunity to invest in a proven technology that has been used by a leading company in Germany.

Condition: new, axle configuration: 3 axles, loading space volume: 55 m³, Equipment: ABS, ferroSTAR 55 cbm Chassis material: Steel Chassis type: Z-chassis King pin load (national) (t): 12 Axle load (national) (t): 8 Axle track (mm): 1310-1310 Saddle height (mm): 1150 Chassis width (mm): 1400 The widest chassis on the market with 1400 mm for maximum stability and safer handling. Loading width (mm): 2325 Internal height at the front (mm) (IHF): 2,285 Internal height at the rear (mm) (IHB): 2,285 Loading length (mm): 10149 KC-Value: 0650 Overall width (mm): 2550 Volume (m³): 55.00 Wheelbase (mm) (WB): 6,600 Overall length (mm): 11,501 Axles: SAF Axle version: Intra Brake version: Disc brake Brake type: SAF - SBS 2220 (Haldex) Offset (ET): 120 Option 1: First axle with lift axle and starting assist Activation of starting assist via button in the truck (mounting of the button is not included in the scope of supply) and by pressing the brake pedal three times Njdpfjzdw Ttex Ab Ajdc Option 3: Third axle with lift axle Brake pad wear indicator connected Return-to-ride (RTR): 15 km/h Air spring protection plate ECAS air suspension with raising and lowering valve Automatic lowering of the air suspension during tilting, manually lockable via Smartboard, and switch on the chassis Coupling head: Pneumatic, European Palm coupling Control console: EBS control on the left side, in the direction of travel, in front of the axles Standard: Smartboard Air and electrical console on the right side, in the direction of travel Support legs: JOST MODUL type Tire dimension: 385/65R22.5 Tire pressure monitoring: Wabco OptiTire Rims: Alcoa Dura Bright TPMS sensor type: Rim-mounted sensor TPMS sensor supplier: ZF Wheel nut covers: Chrome Lighting manufacturer: Aspöck Lighting type: ECOLED III - with STAS logo Rear lights: 2 LED reversing lights, mounted at the rear, on the left and right, on the lamp carrier Position: Work lights (operated via switch) 2 LED reversing lights at the front, on the left and right, in the area of the support legs Underbody protection: Manual operation Splash guards: Underbody protection, black with STAS logo Tilting cylinder: Hyva (STAS manufacturer's choice) Tilting cylinder type: Cylinder with small casing Cylinder tilting angle: Normal ±47° Tilting cylinder model: Hyva - FC 169 Tilting cylinder stroke: 7130 Tilting cylinder max. PTO pressure: 250 Hydraulic coupling: Rotary coupling Hydraulic coupling - size: 1 Hydraulic coupling - gender: Female Hydraulic coupling - hose: 2,100 mm Fenders: Domar STAS with white stripe Splash guards: Fender, Clear Pass Toolbox: On the left side, in front of the axles Aluminum extension ladder with a length of 2.8 m, mounted on the right side Position: Broom and shovel holder with 3 holders each, mounted on the chassis on the left side Load pressure gauge: Ø 100 mm - mounted at the front of the chassis Two plastic wheel chocks Locking device: Chassis - superstructure, rubber bumpers Front wall: Made of 3 mm HB450 Side wall: Made of 4/3 mm HB450 Floor: Made of 5 mm HB450 Position: Rubber pads attached under the floor crossbeams Rear wall type: Swing doors Rear wall: Made of 3 mm HB450 Number of hinges: Rear wall: 3 pairs of door hinges Design: Swing door, divided 1/2 to 1/2, with 1 piece of latch Opening of the door leaves: Right first opening Fastening of the open door leaves: Via chain Sealing: Rear wall with rubber sealing in the lower area, extending 1,000 mm to the side Additional locking: Rear wall, pneumatic

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 10/2023, next inspection (TÜV): 09/2026, loading space length: 10,149 mm, loading space width: 2,325 mm, loading space height: 2,285 mm, loading space volume: 55 m³, Year of construction: 2023, Equipment: ABS, ferroSTAR 54.9 cbm iron gray Chassis type: Z-chassis Axle distance (mm): 1310-1310 Fifth wheel height (mm): 1150 Chassis width (mm): 1400 Loading width (mm): 2325 Technically permissible total weight: 39 = 12 + 9 + 9 + 9 Interior height front (mm) (IHF): 2285 Interior height rear (mm) (IHB): 2285 Volume (m³): 54.9 Overall width (mm): 2550 Wheelbase (mm) (WB): 6600 Overall length (mm): 11520.836 Chassis material: Steel Tire dimension: 385/65R22.5 Loading length (mm): 10149 Axle manufacturer: SAF Axle version: Intra Brake version: Disc brake Brake type: SAF - SBS 2220 Offset (ET): 120 Option 1: Axle with lift axle and starting aid Activation of starting aid: via button in the truck (installation of the button is not included in the scope of supply) and by pressing the brake pedal three times Air suspension: ECAS with lifting and lowering valve Lowering of air suspension: Automatic lowering of the air suspension during tilting, can be manually locked via the Smartboard, as well as a switch on the chassis Coupling head: Pneumatic, European Palm coupling Tire brand: Manufacturer's choice Rims: Steel Tire type: Regional Wheel nuts: Open Wheel nut caps: Plastic Outrigger supports: Aluminum drop-leg supports, mounted at the front of the chassis, with individual operation on both sides, supporting force 20t / pair Operation of underride protection: Manual Position of Smartboard: On the left side, in the direction of travel, in front of the axles Toolbox: On the left side, in the direction of travel, in front of the axles Spare wheel holder: On the right side, in the direction of travel, below the chassis Number of splash guards on the fender: 2 pieces Type of splash guard on the fender: Clear Pass Manufacturer of lighting: Aspöck Type of lighting: ECOLED II Work lights (operated via switch): Included Position of work lights (operated via switch): 2 LED reversing lights at the rear, on the left and right in the direction of travel, mounted on the lamp carrier Ndedpfx Abszmcn Uo Aoc Position of work lights (operated via switch): 2 LED reversing lights at the front, on the left and right in the direction of travel, mounted in the area of the outrigger supports Manufacturer of tilting cylinder: Hyva (STAS manufacturer's choice) Type of tilting cylinder: Hydraulic cylinder with small housing Cylinder tilting angle: Normal Model of tilting cylinder: Hyva - FC 169 Stroke of tilting cylinder: 7130 Hydraulic coupling: Swivel coupling Hydraulic coupling - Size: 1 Hydraulic coupling - Gender: Female Hydraulic coupling - Hose: 2,100 mm Type of Smartboard: ECAS control box Aluminum ladder: With 2.8 m length, mounted on the right in the direction of travel Broom and shovel holder: Included Position of broom and shovel holder: With 3 holders each, mounted on the chassis on the left in the direction of travel Position of broom and shovel holder: On the front wall, on the left in the direction of travel Load manometer: Ø 63 mm - mounted on the side of the instrument panel Splash guard for underride protection: Black with STAS logo, mounted across the entire width of the underride protection Mounting of splash guard for underride protection: Flexible Plastic support wedges: With two plastic support wedges including holder Air and electrical console: Mounted on the right in the direction of travel Rear wall type: Swing doors A-sign: Foldable on the rear wall, mounted on the right in the direction of travel Floor: Made of 6 mm HB450 Position of rubber supports: Mounted below the floor

Condition: used, maximum load weight: 29,710 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 04/2026, next inspection (TÜV): 04/2027, loading space length: 10,610 mm, loading space width: 2,475 mm, loading space height: 2,300 mm, loading space volume: 60 m³, Year of construction: 2026, Equipment: ABS, Stock no. 5748 Rental vehicle – available for purchase, rental, or lease with an option to buy, upon agreement. STAS 60 m³ sliding floor trailer with Cargo Floor and remote control – for rent! ----* Manufacturer: Stas * Type: Farmstar * First registration: 04/2026 * Color: Body RAL 9007 grey-aluminum, chassis RAL 9005 black, tarpaulin black * Volume: 60 m³ (approx. 10.61m long x 2.475m wide x 2.30m high) Njdpfx Aboyz H S Ao Asdc * Gross vehicle weight: 39,000 kg (technical) / 36,000 kg (permissible) * Unladen weight according to vehicle registration: 6,290 kg * Payload: 29,710 kg * Axles: 3x Jost axles / 1st axle: lift axle / starting aid / disc brake * Tires: 385/65R 22.5 NEW on Speedline Diamond aluminum rims * Suspension: Air suspension with raising and lowering function * EBS Wabco * CARGO FLOOR CF 500 SL-C with remote control * 21-slat system with additional plastic profiles below the floor profiles * End caps, floor made of stainless steel * Floor 6mm ribbed * Moving bulkhead with stainless steel handles * Control box at the rear, left side * Control platform with access ladder at the front, right and left side * Hydraulic connections at the front with 3m hoses (with additional connection option to the support legs) * Pressure 1" female * Return 1" female * Swing door (50/50) with 2x twist locks and 1x pneumatic locking * Side walls in smooth design, inside and outside (grain version), welded * Roll-up tarpaulin (680g/m²) with central locking * 3x crossbeams * Individual fenders * Full-load supports * Toolbox at the rear, right side * Shovel and broom holder, left side * Smartboard * TPMS tire pressure monitoring system * Aluminum ladder, right side * Extendable ladder at the rear, right side * Aluminum rear impact guard * One-piece aluminum sheet, foldable, for protecting the rear lights * 2x LED work lights (left + right) * 2x LED reversing lights at the rear * 2 x 3 LED?s in the door closure crossbar Note regarding potential errors in the advertisement: Despite careful preparation of the advertisement, isolated errors may have occurred in the text or the details provided. We assume no liability for errors, changes or interim sales. All information is provided without guarantee. Please contact us to verify details or clarify further questions.

Condition: used, mileage: 32,850 km, power: 174 kW (236.57 HP), color: blue, gearing type: automatic, Equipment: ABS, airbag, central locking, power assisted steering, seat heater, - Passenger airbag Njdpfezwltuex Ab Aodc - Electronic window control - left - Electronic window control - right - Driver airbag - To ensure you receive the best possible advice from us, we kindly request that you schedule an appointment. Mr. Kiel will be happy to assist you, Tel: 553 Trailer maneuvering assistant, B25 Parking brake, electric, BA3 Active brake assist, BH1 HOLD function, BS1 Brake calipers with Mercedes-Benz lettering, C6L Multifunction steering wheel, C74 Illuminated Mercedes-Benz entry strip, CA1 AGILITY CONTROL chassis, CA3 Active steering assist, CK8 Steering wheel heater, CL1 Steering wheel adjustable in inclination and height, CL3 Leather steering wheel, CU4 Aerodynamics package, D14 Anodized roof rails, E07 Hill-start assist, E1D Digital radio (DAB), E1E Navigation, E1T Touchpad, E28 Additional battery for retrofitted consumers, E4S Smartphone integration package, E7H MBUX multimedia system High, ED4 Fleece battery 12 V 92 Ah, EL9 2-way speakers front and rear, ES2 12 V socket in the trunk / cargo area, ES3 12V sockets for rear seats right and left, ET4 Active distance assist DISTRONIC, F1O Center console with storage compartment + cup holder, F2W Winter package, F48 Heating for windshield washer system, F65 Exterior mirrors, automatically folding in, F66 Lockable glove compartment, F69 Exterior mirrors, electrically adjustable and heated with integrated turn signal, F71 Interior mirror, automatically dimming, FG9 Cup holder that can be attached to rear armrests, FH0 Trim elements in piano lacquer look, black, FP3 Mirror package, FS5 Illuminated mirrors for sun visors, G43 9G-TRONIC, H00 Warm air duct to the passenger compartment, H12 Auxiliary hot water heater, H15 Seat heating for front passenger, H16 Seat heating for driver, H20 Heat-insulating glass all around, HH4 Automatic climate control system THERMOTRONIC, HY1 Remote control for auxiliary hot water heater, HY2 Remote control for auxiliary hot air heater, HZ1 Auxiliary hot air heater, HZ7 Air conditioning, semi-automatic control, TEMPMATIC in the rear, IN2 Wheelbase 3200 mm, long overhang, J55 Seatbelt warning system for front passenger seat, JA7 Blind Spot Assist, JA9 Traffic Sign Assist, JB4 Active Lane Keeping Assist, JB6 Parking package with 360° camera, JF2 ENERGIZING Comfort, JH0 Widescreen Cockpit, JH3 Communication module (LTE) for digital services, JM2 Extended automatic restart on highways, JM3 Route-based speed adjustment, JM4 Active speed limit assist, JP1 PRE-SAFE, JS3 Driving Assistance Package, JW8 ATTENTION ASSIST, JX2 Service interval 40,000 km, K51 Protection against misfueling, KB5 Main tank 70 liters, L LEFT-HAND DRIVE, L45 MULTIBEAM LED with Highbeam Assist PLUS, LA2 Headlight Assistant, LB9 Exit lights, LC4 Comfort roof control unit, LC5 Ambient lighting in the exterior mirrors, LC6 Lighting in the grab handle in the rear with reading spot, LC7 Lighting for the footwell in the front, LC8 Ambient lighting rear tailgate, LE1 Adaptive brake light, LE4 Ambient lighting in the cockpit with 64 colors, LE6 Night lighting in the rear, LG4 Tail, brake and indicator lights in LED technology, MJ8 ECO Start-Stop function, MO5 EMISSIONS CLASS EURO 6e, P28 EASY PACK package, electric sliding door / tailgate, P2Y STYLE Plus package, Q50 Trailer coupling, ball head detachable, QA4 ... Metallic, alloy wheels, electronic immobilizer, ESP, navigation system, auxiliary heating, particulate filter, warranty, rain sensor, electric exterior mirrors, Bluetooth, hands-free syste

Condition: used, maximum load weight: 30,060 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2024, next inspection (TÜV): 06/2025, loading space length: 9,665 mm, loading space width: 2,475 mm, loading space height: 9,665 mm, loading space volume: 52 m³, Year of construction: 2024, Equipment: ABS, Kingpin load: National 12 t Axle load: National 8 t Axle spacing: 1310-1310 mm Fifth wheel height: 1150 mm Chassis width: 1400 mm Internal height: Front 2165 mm Internal height: Rear 2165 mm Overall width: 2550 mm Wheelbase: 6800 mm Overall length: 10656 mm Chassis material: Aluminum Tires: 385/65R22.5 Loading length: 9665 mm Axles: SAF Brake type: SAF - SBS 2220 Offset: 120 Option: 1st axle with lift axle and traction aid Activation of traction aid: Via a button in the truck (installation of the button is not included in the scope of delivery) and by pressing the brake pedal three times. Brake pad wear indicator: Not connected Tire pressure monitoring system (Tire Pilot) Without Tire pressure monitoring: Wabco Trailerpulse ECAS air suspension with raising and lowering valve Air suspension lowering: Automatic lowering of the air suspension during tipping, manually lockable via smartboard and switch on the chassis Pneumatic coupling head: European Palm coupling Chrome wheel nut caps with STAS logo Landing gear: Aluminum drop legs mounted at the front of the chassis, with individual controls on both sides, support force 20 t/P Underrun protection control: Manual Towing eye: 1x in the direction of travel Underrun protection mud flaps: Black with STAS logo Underrun protection cover: Handle on the underrun protection EBS control panel: Control panel: In the direction of travel, in front of the axles Toolbox position: On the left in the direction of travel, in front of the axles: Plastic Ndsdpfx Abjuar Amj Asc Toolbox dimensions: Left in front of the axles: 860 x 520 x 500 Type of fender: Domar STAS with white line Number of mud flaps on the fender 2x Mudguard type: Clear Pass Lighting manufacturer: Aspöck Lighting type: ECOLED II Work lights (switch operated) Position of work lights (switch operated) 2x LED reversing lights, front, left and right, in the area of the landing gear Tilt cylinder manufacturer: Hyva Tilt cylinder type: Hydraulic cylinder with large casing Tilt cylinder model: Hyva - FC 169 Tilt cylinder stroke: 7130 Tilt cylinder max. pressure: 250 Surface treatment of cylinder stages: Standard surface treatment Hydraulic coupling: Swivel coupling Hydraulic coupling - size 1 Hydraulic coupling - gender: Female Hydraulic coupling - hose 2,500 mm Smartboard Aluminum leaning ladder 3 m Left-hand ladder attachment for rear entry: With hook for hanging Position of broom and shovel holder: With 3 holders each, on the chassis on the left in the direction of travel Loading pressure gauge Ø 100 mm - mounted on the front of the chassis With two Plastic wheel chocks including bracket Chassis safety device - body rubber pads Air and electrical console, centered in the direction of travel, with boom End wall inclination (°) 90 Rear wall inclination (°) 90 Rear wall type combi-door Inner lower chord profile inclination (°) 90 Floor 8 mm aluminum - 110 Brinell Position of rubber pads below the floor cross members End wall 4 mm (aluminum) Side wall profile 3 mm - 2 mm, smooth inside and outside, double-walled profiles 600 mm wide - 30 mm thick Rear wall aluminum Combi-door type 1/2 - 1/2 with pivoting door end cross member Door leaf opening: Right door leaf opens first (STAS manufacturer's choice) Door end cross member: Pivoting design Hinge type: With double door hinge (double-joint hinge) Slider: Rectangular design, standard Slider position 2 sliders with operating handles, one each on the left and right in the direction of travel. Securing the open door leaves. The

Condition: reconditioned (used), Year of construction: 2009, functionality: fully functional, CNC universal lathe GILDEMEISTER NEF 600 V 3 Njdpj Aa Ag Ujfx Ab Asdc With Siemens 840 D control system Year of manufacture: 2009 Swing over bed: 600 mm Swing over cross slide: 410 mm Spindle bore: 90 mm Travel in X-axis: 320 mm Travel in Z-axis: 1250 mm Maximum spindle speed: 3000 rpm Including the following accessories: Sliding guard with internal lighting 12-station turret VDI 40 with 6 driven stations Various VDI 40 tool holders Tailstock with quill Collet chuck Hainbuch with 2 collets Foot switch for collet adjustment Coolant spray gun Coolant system Chip tray Operating manuals

Condition: new, maximum load weight: 28,240 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,480 mm, loading space height: 2,820 mm, loading space volume: 91 m³, Equipment: ABS, New vehicle in stock – available immediately! Buy, rent, or rent with an option to purchase! Side tarpaulin can be retrofitted at an extra cost! Stas 91 m² sliding floor / 10 mm flat floor / TÜV cargo certificate ----* Manufacturer: Stas * Type: BIOSTAR - Sliding floor * First registration: - (New vehicle) * Color: Chassis galvanized, body RAL 7016 silver-grey, tarpaulin SIO 7340 * Volume: approx. 91m³ (13.50m long x 2.475m wide x 2.64m to 2.82m high) * Total weight: 36,000 kg * Unladen weight according to vehicle registration: 7,760 kg * Payload: 28,240 kg * Axles: 3x SAF axles / 1 lifting axle / starting aid / disc brake Ndodpfx Abjv Emk Ue Asc * Tires: 385/65 R22.5 New on Speedline Diamond aluminum rims * Wheelbase: 7.85m * Suspension: ECAS air suspension with lifting and lowering * ABS / EBS * Cargo Floor CF 500 SL-C with remote control and control box at the rear left * 21 floorboards, 10mm flat * 12 pairs of recessed lashing eyes in the floor * End caps made of aluminum, welded * Complete discharge wall with brushes and stainless steel handles * Service door in the front wall * Double doors (50/50) with pneumatic locking * 2x twist locks for locking * Door closing crossbeam, swiveling * Hydraulic connections at the front with 3 m hoses and * Connection option below the body without hoses * Operating platform with ladder at the front left * Saddle height: 1150mm * Individual mudguards * Full load supports * Aluminum lighting protection at the rear (one-piece, foldable) * Roll tarp (900g/m²) with tension straps * Steel bars, foldable, and tension straps along the sides * 1x toolbox at the rear left * 1x aluminum ladder 3.80m long * Tire pressure gauge * Smartboard * TPMS tire pressure monitoring system * Aluminum bumper buffer at the rear * 1x extendable ladder at the rear right * 2x LED work lights in front of the axles * 2x LED reversing lights at the rear * 1x LED work light in the front wall inside * 2 x 3-function lamps at the top in the door crossbar New vehicle in stock – available immediately! Buy, rent, or rent with an option to purchase! Note on possible errors in the advertisement: Despite careful preparation of the advertisement, individual errors may have crept into the text or the information. We assume no liability for errors, changes or interim sales. All information is without guarantee. Please contact us to verify details or clarify any further questions.