Used Stas Biostar 13.50 92M³ Elektr. Vedeck for sale (7,076)

Condition: used, axle configuration: 3 axles, first registration: 09/2025, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,825 mm, loading space volume: 92 m³, Chassis: Superstructure manufactured using a self-supporting design with corresponding reinforcements in the lower belt for particularly high stability and strength, cross members 140mm high – reinforced design (for high ground load), additional reinforcement as a gusset plate in the front lower belt/vehicle frame area, chassis made of galvanized steel up to the support structure (semi-trailer construction max. total weight up to 39,000 kg) Axles and Suspension: Disc brake 22.5 Jost (DCA) axle units – off-road, 3x9t with DCA air suspension, ECAS lifting and lowering valve, Wabco Smartboard, electronic brake wear indicator BVA – can be read in the central control unit, 1st axle liftable with starting assist, 3rd axle liftable with Optiturn and Optiload without central control unit equipment, Wabco Trailerpulse – tire pressure monitoring system Tires and Wheels: 6 wheels with tires of size: 385/65 R22.5, tires approx. 60-70% on steel rims silver in 11.75x22.5 ET 120 King Pin: 2" king pin screwed into a 10mm steel plate Hnsdpez S St Aofx Aitou Landing Gears: Mechanical landing gears with two speeds, 2x 20t support load with pivoting foot Braking System: According to EG standard, EBS-E system Wabco with RSS system (Roll-Stability-Support) and premium modulator, spring brake system acting on two axles with operation in front of the first axle on the left, aluminum air reservoir system Electrical System: According to the guidelines of EG standard 91/633 and 97/28 with five-chamber lights type: Aspöck ECOLED 3, 24V system with 1x15-pole and 2x7-pole socket with side marker lights - LED flashing, 2x reflective panels on the rear, position lights at the front 2x white, rear 2x red, 2x reversing lights in the lamp carrier, audio alarm when reversing Superstructure/Body: Body inside fully welded, reinforced side walls, front wall load 17,250 dkN, side wall load 13,400 dkN, rear wall load 10,400 dkN, aluminum body, side walls 30mm thick aluminum side wall profiles (2-3mm) 600mm wide, completely welded with upper and lower belts reinforced, plank profiles inside fully welded, floor laid as a sliding floor system on 140mm cross members, floor load capacity approx. 9t/m?, cross members mounted closely together (approx. 350mm), aluminum front wall with 600mm plank profiles (2-3mm) in a straight design, special aluminum corner profiles in a beveled design, smooth rear wall in a straight design with 2 aluminum swing doors 30/50mm thick with 2 rotating rod locks in the welded aluminum rear frame, attached in Teflon and INOX bearings, doors secured in the open position with two fixed stainless steel door latches, hard wear plates on the side walls approx. 2,000x1,500x4 mm fully welded, moving residual emptying wall with Kevlar fabric approx. 1,800mm long, plus side Kevlar fabric seal, service door in the front wall on the left, opening inwards Hydraulic System "Cargo-Floor" Sliding Floor System: Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE-HD slide bearings plus anti-lift slide bearings, floor type: CF 10mm ribbed, end plate aluminum, hydraulic cylinder with approx. 200mm working stroke, hydraulic connection between the support legs with a separate possibility for connecting the hydraulic line to the front wall, load compartments to be specified, line size NW 21, operating pressure 190-max 250bar, aluminum end pieces welded into the sliding floor, control console in front of the first axle on

Condition: used, axle configuration: 3 axles, first registration: 06/2022, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,825 mm, loading space volume: 93 m³, Chassis: Reinforced, continuous chassis design, new. Body: Self-supporting construction with corresponding reinforcements in the lower belt for particularly high stability and strength. Cross members, 140 mm high, reinforced design for high ground load. Additional reinforcement as a gusset plate in the front lower belt/vehicle frame area, made of galvanized steel up to the support structure (semitrailer construction, max. 39,000 kg). Axles and Suspension: Disc brake 22.5". Jost (DCA) axle assemblies, 3x9 tons with DCA air suspension, lifting and lowering function, Wabco Smartboard information center, electronic brake wear indicator (BWI) readable in the central control unit (CCU) (display), 1st axle with starting aid (new EC regulation, without CCU option). Tires and Wheels: 6 wheels with tires size 385/65 R 22.5, approximately 50-60% tread, on steel rims, silver, 11.75x22.5, offset 120. Kingpin: 2" kingpin bolted into a 10 mm thick plate. Landing Gear: Mechanical landing gear with two speeds, 2x 20 tons support load with pivoting foot. Hnedsz S St Nepfx Aitju Braking System: According to EC standards, EBS E system Wabco with RSS (Roll Stability Support) and Premium Modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system. Electrical System: According to the guidelines of EC standards 91/633 and 97/28 with 2 five-chamber lights, Aspöck Europoint 3 type, integrated in the aluminum rear panel, 24-volt system with 1x15-pole and 2x7-pole socket, with side marker lights in LED design, 2 reflective panels on the rear, position lights front 2x white, rear 2x red, 2 separate LED reversing lights integrated in the U-shaped protection. Body/Container: Body completely welded on the inside, reinforced side walls. Front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn. Aluminum container, side walls 30 mm thick ALU plank profiles (2-3 mm) 600 mm wide, completely welded with lower and upper belt. Plank profiles completely welded on the inside. Floor as a sliding floor system laid on 140 mm ALU cross members. Floor load approximately 9 tons/m2. Cross members mounted relatively close together (approx. 350 mm). ALU front wall with 600 mm plank profile, 2-3 mm thick, in a straight design. Special ALU corner profiles in a beveled design. Smooth rear wall in a straight design with 2 ALU wing doors, 50/30 mm thick, with 2 swivel rod locks, mounted in a welded ALU rear frame with Teflon and stainless steel bearings. Doors secured in the open position with one chain each on the side. Moving discharge wall with Kevlar cover, approx. 1,800 mm long, plus side Kevlar seal. Hydraulic System: "Cargo - Floor" Sliding Floor System Sliding floor system in the floor with hydraulically moved ALU profiles on ALU square profiles with approx. 880 PE-HD sliders, plus anti-lifting glide bearings, type CF, 10 mm floor design. Hydraulics with approx. 200 mm working stroke. Fixed stops on the front wall, separate possibility for connecting the hydraulic line under the vehicle with fixed stops. Line size NW 21. Fixed stops with a size and design to be specified. Operating pressure 190-max. 240 bar. ALU end pieces welded into the sliding floor. Electrical operation at the rear left with remote control integrated in a lockable, waterproof box. Accessories: 6 PVC fenders with 2 anti-spray mud flaps, 6 PVC splash guards above the wheels, 1 ALU wheel chock, side ALU impact protection in a folding design, 1 toolbox approx. 860x460x400 mm in p

Condition: new, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,650 mm, loading space volume: 93 m³, Chassis Version with continuous chassis reinforced, new body manufactured in a self-supporting design with corresponding reinforcements in the lower flange for particularly high stability and Hodpfx Aoyh S Aioitsnu strength, cross member 140 mm high reinforced version (for high ground loads) additional reinforcement as gusset plate in the front lower flange/vehicle frame area, chassis made of galvanized steel up to the support structure, (trailer construction max. 39,000 kg) Axles and suspension "Disc brake 22.5" Jost (DCA) axle units version, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard Infocenter, electronic brake wear indicator BVA-readable in the tractor unit (display), 1st axle with traction aid (new EC regulation, without tractor unit equipment), (on request against MP 1st + 3rd axle liftable) Tires and wheels 6 wheels with tires of size 385/65 R 22 .5 according to manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75?22.5 ET 120 Seatposts mechanical support winches with two speeds, 2x 20 ton support load with swivel foot, Braking system according to E.G. standard?EBS E-system Wabco with RSS system (roll stability support) and premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system, electrical system according to the guidelines of the EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint 3 integrated in the aluminum rear end, 24 volt system with 1?15 pin and 2x7 pin. Socket, with side clearance lights in LED design, 2 reflective panels on the rear, 2 white position lights at the front and 2 at the rear. red, 2 separate LED reversing lights integrated in the U-protection Structure/trough "structure fully welded inside" reinforced side walls, front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn Aluminum trough, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide completely welded with lower and upper belt, plank profiles fully welded inside, floor laid as a sliding floor system on 140 mm aluminum cross beams, floor forklift load approx. 9 ton/m2 cross beams mounted accordingly closely (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in straight design, special aluminum corner profiles in beveled design, smooth rear wall in straight design with 2 aluminum wing doors 50/30 mm thick with 2 pivot rods Locks in the welded aluminum rear frame attached to Teflon bearings and stainless steel bearings, doors secured in the open position with a chain on each side, hard wear plates on the side walls approx. 2,000x1,500x4mm fully welded, running residual emptying wall with Kevlar tarpaulin approx. 1,800 mm long plus side with Kevl. -Plane sealing, service door in front wall with ladder turning inwards Hydraulic system "Cargo - Floor" sliding floor system Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE?HD sliders plus anti-lifting slide bearings, type CF 10 mm floor version, hydraulics with approx. 200 mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electric. Rear left control with radio control integrated in a lockable waterproof box, without hydraulic hoses Accessories 6 PV

Condition: new, maximum load weight: 28,320 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 92 m³, Equipment: ABS, Chassis: Design with continuous chassis, newly manufactured in self-supporting aluminum construction with corresponding reinforcements in the lower belt for particularly high stability and strength, reinforced cross members 140mm high (for high ground load), additional reinforcement as a gusset plate in the front lower belt/vehicle frame area, chassis made of galvanized steel up to the support structure. Axles and Suspension: Disc brake 22.5, Jost (DCA) axle assembly design, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard information center, electronic brake wear indicator BVA readable in the central control unit (display), 1st axle with starting aid (new EC regulation, without central control unit option), (optional, 1st and 3rd axles can be lifted). Tires and Wheels: 6 wheels with tires of size 385/65 R 22.5 according to manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75x22.5 ET 120. Kingpin: 2" screwed into a 10mm thick plate. Landing Gear: Mech. support winch with two speeds, 2x 20 tons support load with swivel foot. Braking System: According to EG standard, EBS electronic system Wabco with RSS system (Roll-Stability-Support) and Premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system. Electrical System: According to the guidelines of EG standard 91/633 and 97/28 with 2 five-chamber lights, type Aspöck Europoint, integrated in the aluminum rear panel, 24-volt system with 1x15-pole and 2x7-pole socket, with side marker lights in LED version, 2 reflective panels on the rear, position lights at the front 2x white, rear 2x red, 2 separate halogen reversing lights integrated in the U-profile. Body/Dump Body: Body fully welded inside, reinforced side walls, front wall load 17,250 dkn, side and rear wall 13,400 dkn/10,400, aluminum dump body, side walls 30mm thick aluminum plank profiles (2-3 mm) 600mm wide, completely welded with upper and lower belts, plank profiles fully welded inside, floor laid as a sliding floor system on 140mm aluminum cross members, floor load capacity approx. 9 tons/m2, cross members mounted closely together (approx. 350mm), design with special aluminum corner profiles in a beveled design, smooth rear wall in a straight design with 2 aluminum wing doors 50/30mm thick with 2 swivel rod locking mechanisms, fastened in the welded aluminum rear frame in Teflon bearings and stainless steel bearings, doors secured in the open position with one chain each on the side, hard wear plates on the side walls approx. 2000x1500x4mm, fully welded, moving residual emptying wall with Kevlar sheeting approx. 1800mm length plus side brushes with Kevlar sheeting seal, service door in the front wall with ladder, folding inwards. Hydraulic System: Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE-HD sliders plus anti-lifting slide bearings, type CF 10mm floor design, hydraulics with approx. 200mm working stroke, fixed points on the front wall, separate possibility for connecting the hydraulic line under the vehicle with fixed points, line size NW 21, fixed points with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electric operation behind the left side with remote control integrated in a lockable waterproof box, without hydraulic hoses. Accessories: 6 PVC mudguards with 2 anti-splash mud fla Hnedpfxefi Nmwo Aitou

Condition: new, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 92 m³, Equipment: ABS, -Panama Plane 900g -10 mm floor -V-shaped sheet metal 2000x1500x4 -Service door on the front panel -12 pairs of lashing eyes on the front panel Chassis: Design with continuous, reinforced chassis, new body manufactured in a self-supporting design with corresponding reinforcements in the lower chord for particularly high stability and strength, cross members 140 mm high, reinforced design Axle and suspension: Disc brake 22.5 Jost axle assembly, 3*9 tons with DCA - air suspension, lift and lower function, Wabco Smartboard, electronic brake wear indicator BVA, 1st axle with start assist (without SZM equipment) Tires and wheels: 6 wheels with tires size 385/65 R 22.5, premium tires, on steel rims, 11.75*22.5 ET 120 Kingpin: Mechanical support winch, 2x20 tons support load Braking system: EBS E system Wabco with RSS system (Roll Stability Support) and premium modulator, spring brake system acting on two axles with operation at the rear Electrical system: According to the guidelines of EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint integrated in the aluminum rear panel, 24 Volt system with 1*15-pole and 2*7-pole socket, with side marker lights in LED design 2 separate LED reversing lights integrated in the U-shaped protection, Body/tipper bed: "Body fully welded inside", reinforced side walls Aluminum tipper bed, side walls with 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide, completely welded with lower and upper chord, plank profiles fully welded inside, aluminum front panel with 600 mm plank profile, 2-3 mm thick, in a straight design, with 2 aluminum wing doors 50/30 mm thick, sliding residual unloading wall with Kevlar sheet approx. 1,500 mm long plus side Kevlar seal Hydraulic system: "Cargo Floor" sliding floor system Hnodpfxsfi Nmps Aitsu Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles, mounted with approx. 880 PE-HD gliders, type CF 8 mm floor design, fixed parts on the front panel, separate possibility for connecting the hydraulic line under the vehicle with fixed parts, operating pressure 190 - max. 240 bar, aluminum end pieces welded into the sliding floor, without hydraulic hoses Accessories: 6 PVC mudguards with 2 anti-spray mud flaps, 1 aluminum spare wheel holder, side aluminum approach guard in foldable design, 1 toolbox approx. 860*460*400 mm in plastic, 3.7m aluminum ladder, tarpaulin approx. 660g/m2 with tarpaulin system incl. tarpaulin rail, with side tension straps or quick release fastener, walkway on the front panel with access ladder, 3 steel locking bars with locking mechanism, swiveling and lockable, aluminum protective cover with hinges for the lighting, etc. +590¤ Delivery costs Unladen weight: approx. 7,700 kg Offer and images subject to change.

Condition: used, functionality: fully functional, machine/vehicle number: YE6S300ZX00080084, empty load weight: 7,810 kg, maximum load weight: 34,190 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 04/2024, next inspection (TÜV): 09/2027, loading space length: 13,513 mm, loading space width: 2,475 mm, loading space volume: 90 m³, suspension: air, tire size: 385/65 R 22,5, color: black, Year of construction: 2024, Equipment: ABS, Item number: #31160 Lift axle Portal doors Disc brakes Cargofloor load floor, 8 mm Platform with ladder Moving side wall Pneumatic door locking system Simple twist locks on the outside 12 pairs of recessed lashing rings Roller cover Lift axle A1/A3 Grain discharge chute Holder for ladder/broom Wabco Smart Board 2x LED reversing lights ABS/EBS Weweler kingpin supports Raising/lowering mechanism 2x toolboxes Hnedpfx Aoz R Sh Eoitou ASW (anti-spray flaps) Side protection cover Axle manufacturer: Jost Axles: 3 Tires: 358/65 R 22.5 Body dimensions: 13,513 x 2,475 x 2,700 mm Leasing or financing options available upon request!

Condition: used, maximum load weight: 28,150 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 04/2021, next inspection (TÜV): 02/2027, loading space length: 13,400 mm, loading space width: 2,480 mm, loading space height: 2,780 mm, loading space volume: 92 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2021, Equipment: ABS, 3-axle STAS S 300ZX sliding floor semi-trailer, 92 m³ VIN: 000929 Chassis / Components: * Air suspension / Raise and lower function * Lift axle 1st + 3rd axle * Weweller support legs * WABCO Smart Board * Alcoa Dura Bright aluminum rims * Tires: 385/65 R.22.5 * Remaining tire tread: Front ~90%, Middle 90/70%, Rear ~90% * 3 x Jost axles with disc brakes * Wabco Smart Board * PVC storage box STAS * 1 x Spare wheel carrier Body: * Sliding floor system Cargo Floor * Service flap (inspection window) on the left * Volume: approx. 92 m³ * Roll-over tarp * Standing platform with walkway on the left * Remote control Weights: * Gross vehicle weight: 36,000 kg Hedpfxozuqh So Aitjnu * Payload: 28,150 kg * Tare weight: 7,850 kg Other: * German registration * MOT valid until 02/2027 New main inspections / safety checks or weight reductions/increases are possible upon request. We will gladly assist you in obtaining export/transfer license plates; furthermore, we can arrange the transport of your purchased vehicles within Germany. Contact us! We speak the following languages: German, English, and Russian! No liability for printing and typographical errors, changes, prior sale, and errors. Subject to change! Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the preparation and distribution of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the distribution of new and used commercial vehicles. On an area of 11,000 m², you will find a variety of vehicles. Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. Convince yourself! Our service for you: Loading of vehicles We will gladly help you with loading your purchased vehicles. Organization of special transports We will gladly help you with the organization of special transports. Day license plates / Export license plates We will gladly help you obtain export license plates/short-term license plates. Processing of customs formalities We will gladly help you with customs matters.

Condition: good (used), operating hours: 777 h, fuel type: electric, General information Year of manufacture: 2006 Drivetrain Drive: Wheel Hnsdpozqydzefx Aitju Weights Empty weight: 2.735 kg Functional Mast: articulated arm Lifting capacity: 200 kg Working height: 1.000 cm CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: good Visual appearance: good Other information Remanufactured: Yes Max. horizontal reach: 300 m Transport dimensions (LxWxH): 2,7/1/1,99 Additional information Please contact Tobias Mayr for more information

Condition: used, axle configuration: 3 axles, first registration: 08/2026, loading space volume: 90 m³, Year of construction: 2026, Equipment: ABS, Axle spacing (mm) 1310-1310 Fifth wheel height (mm) 1150 Chassis width (mm) 1200 Loading width (mm) 2475 Internal height front (mm) (IHF) 2641 Internal height rear (mm) (IHB) 2778 Loading length (mm) 13513 Chassis neck height (mm) 217 Overall width (mm) 2550 Overall length (mm) 14000 Axles, brakes, and suspension Axles: SAF Brake type: Disc brake Brake type: SAF - SBS 2220 Offset (ET) 120 Option 1: Axle with lift axle and starting aid Starting aid activation via button in the truck Option 3: Axle with lift axle Brake pad wear indicator ECAS air suspension with raise and lower valve Lowering of air suspension via Smartboard, as well as raise and lower valve Control console, EBS operation on the left side in the direction of travel, behind the axles Standard Smartboard Air and electrical connection console in the center with gantry As a steel gear support winch, type Weweler, with support feet, one-sided operation, and 2 speed levels Position of support handle of the support winch on the outside Tires: 385/65R22.5 Wabco Trailerpulse Tire type: Regional distance TPMS sensor type: Rim-mounted sensor TPMS sensor supplier: ZF Lighting: Aspöck Lighting type: ECOLED III 2 LED reversing lights, mounted at the rear in the direction of travel on the left and right on the lamp carrier Position of work lights (operated via switch): 2 LED reversing lights at the front in the direction of travel LEDs in the door frame crossmember: 2 x 3 LEDs Splash guard, underrun protection Control console, sliding floor on the left behind the axles Hydraulic coupling, fifth wheel coupling - size 3/4, return line on the right Hydraulic coupling - gender: Female, return line to fifth wheel coupling Hydraulic coupling return line - size 1 - gender: Female Hydraulic coupling - hose 3,000 mm Hydraulic coupling - position: Connection option on the front wall (also with connection option on the support legs) Toolbox, direction of travel, air connection on the side of the instrument panel Aluminum access ladder 3.80 m - on the right in the direction of travel Position of broom and shovel holder on the side underrun protection on the left in the direction of travel Distance from the lower edge profile to the upper side wall at the rear: 2649 Profile, front wall: 3 mm - 2 mm Service door on the left in the direction of travel Side wall Profile, side wall: 3 mm - 2 mm Wear plates, rectangular: 1500 x 1000 x 4 mm Sliding floor system, manufacturer: Cargo Floor Operation of floor system: Wireless remote control Cargofloor Control type: CF 500 SL-C - E-CONTROL Number of floor profiles: 21 Floor profile: 8 mm ribbed, sliding floor, stainless steel With additional plastic guides under the floor profiles End cap reinforcement: Stainless steel shoes over the end caps of the floor profiles, with aluminum wear plate above the end caps Oil temperature sensor for sliding floor system Complete discharge wall: ALU Storage of complete discharge wall: 6 wheels Rear door Rear wall type: Swing doors Hnjdpfozir Ivex Aiteu Rear wall: Aluminum Design of swing door: 1/2 to 1/2 split, with door frame crossmember Opening of the door leaves: The right door leaf opens first Door frame crossmember: In a pivoting design Material of door frame crossmember: Aluminum Locking of rear doors: 1x twist bar / door half Number of door handles - door leaf left: 2 door handles per twist bar Number of door handles - door leaf right: 1 door handle per twist bar Fastening of the open door leaves: Spring holder with plasti

Condition: used, maximum load weight: 27,500 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2023, next inspection (TÜV): 06/2025, loading space volume: 100 m³, Year of construction: 2023, Equipment: ABS, bioSTAR, approx. 100 cbm, 14.9 m internal length silver-grey BIOSTAR - STEERABLE AXLE - V14900 - VERTICAL FRONT WALL - VERTICAL REAR DOOR Internal length of the body: +/- 14900 MM Internal width of the body: 2475 MM Volume of the body: approx. 98.6 cbm GVW: 36 T Wheelbase: 1310 MM Unladen weight: 8500 kg Saddle height: 1150 mm TECHNICAL DESCRIPTION 1. CHASSIS SADDLE HEIGHT The exact saddle height is 1150 mm. AXLES Tridem: Manufacturer: SAF - CUSTOM DESIGN (CD) Capacity: 3 x 9 T Suspension: Original SAF air suspension Brakes: large disc Offset: ET 120 BVA: included The first axle is an automatic lift axle controlled via the EBS-E system. The third axle is a trailing steerable axle. CONNECTION BRAKE WEAR INDICATOR (BVA) Brake wear indicators are connected. LIFT AXLE FUNCTION: Without lift axle. With starting aid. STARTING AID The starting aid is activated by pressing a button in the truck (truck equipment not included). AIR SUSPENSION Lifting and lowering device. Aluminum air tank. LOCKING OF TRAILING STEERABLE AXLE Locking of the trailing steerable axle is done as follows: - via the rear lights - with a button in the truck (truck equipment not included) TIRES 6 x 385/65 R 22.5 tires for regional transport (manufacturer's choice) on aluminum rims ALCOA MATT. ET 120. BRAKE SYSTEM - EBS EBS-E system WABCO 2S/2M - PREMIUM MODULATOR 2-circuit compressed air brake system acc. to CE guidelines. Spring brake parking brake acting on 2 axles. With SMARTBOARD. R.S.S. (Roll Stability System) LIGHTING - ASPÖCK 24 Volt electrical system. 2 x 7-pole + 1 x 15-pole sockets ISO connection. Aspöck set. Orange LED lighting is mounted on the side of the trailer. Without distribution box at the rear - NORDIC. REAR LIGHTING IN THE UNDER RIDE GUARD The lighting is mounted in the fixed aluminum under-ride guard. With aluminum lighting protection (foldable). 2 x 1 five-chamber light - EUROPOINT III - LED version. HYDRAULIC CONNECTION Connection on the front wall. With additional connection option below the body in front of the support legs. ACCESSORIES RETRACTABLE LADDER REAR Retractable ladder integrated at the rear of the vehicle, on the right. PNEUMATIC CENTRAL LOCKING With pneumatic central locking. TOOL BOX PVC tool box with key (800 x 460 x 430 mm) SPARE WHEEL HOLDER Aluminum spare wheel holder (single) Hedpfxjxplxzs Aitsnu 2. TIPPER BODY FRONT WALL The front wall consists of sturdy aluminum plank profiles. SEAL BETWEEN FLOOR AND FRONT WALL Fixed seal between the floor and front wall by means of an aluminum profile and PVC seal. SIDE WALLS Side walls in smooth design, inside and outside. Double-walled side wall profiles 600 mm wide - 30 mm thick - 3 mm inside - 2 mm outside (grain version). The side wall profiles are continuously welded together on the inside. WEAR PLATES Wear plate in aluminum, rectangular, on the inside at the rear, 2000 (L) x 1500 (H) x 4 mm. TIPPER FLOOR SYSTEM CARGO FLOOR CF 500 SL-C Electric operation. 21 slat system. Drive segment consisting of 3 hydraulically double-acting cylinders with a working stroke of 200 mm. End plate at the rear made of stainless steel. OPERATION OF FLOOR SYSTEM Electric operation - electrically with remote control (original Cargo Floor). Loading - stop - unloading via switch. Manual emergency operation by means of a unique red Cargo rotary knob. TIPPER FLOOR FRAME Frame for wheelbase 7850 mm. 21 slats. FLOOR SLATS 21 aluminum slats - 8 mm ribbed with welded aluminum end caps. REAR DOOR 2 doors

Condition: used, STANGE Elektronik GmbH Industrial Control / Process Control SE-604 Automation solution with CoDeSys multitasking PLC For sale is a used industrial control system from the manufacturer STANGE Elektronik GmbH. The SE-604 is a powerful control and visualization solution for industrial process and heat treatment systems. Control, PLC, program management, and system visualization are combined in one system. Technical data: Manufacturer: STANGE Elektronik GmbH Type: SE-604 Display: 6.5 inch TFT-LCD Resolution: 640 x 480 pixels Operation: Membrane keypad, 34 keys Processor: Pentium-based 32-bit processor Working memory: 256 MB DRAM Program memory: CompactFlash ≥ 256 MB Operating system: WindRiver VxWorks PLC: IEC 61131 CoDeSys multitasking soft PLC SE-604 power supply: 24 V DC (18–36 V) Power consumption: typically 24 W Operating temperature: 0 to +50 °C Protection class: Front IP65 / Rear IP20 Dimensions SE-604 (W x H x D): 290 x 165 x 90 mm Weight SE-604: approx. 2.5 kg Functions: Up to 50 control zones Up to 250 programs / recipes Up to 500 alarms with alarm history Program generator for up to 50 setpoints and 64 control tracks PID control with self-optimization function System visualization Web server / remote control Configurable user and operating levels Interfaces: Ethernet 10/100 2 x USB 2.0 RS232 RS422 CAN Modbus Profibus DP optional Application areas: Industrial and process plants Heat treatment systems Universal chamber furnaces Nitriding furnaces Hearth car furnaces Autoclaves Climate chambers Scope of delivery: STANGE SE-604 control system in housing Connection and cable set as shown in the pictures Condition: Used Optical condition as shown in the pictures Operating hour counter available The table shown in the photos and any other items not explicitly mentioned are not included in the sale. Hjdpsz Nvkyefx Aitonu Shipping or freight transport is possible. Subject to change, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 02/2024, loading space length: 13,513 mm, loading space width: 2,475 mm, loading space height: 2,821 mm, loading space volume: 91 m³, total length: 14,000 mm, total width: 2,550 mm, Year of construction: 2024, Equipment: ABS, Chassis Type: Sliding Floor King Pin Load (National) (t): 12 Axle Load (National) (t): 8 Axle Distance (mm): 1310-1310 Saddle Height (mm): 1150 Loading Width (mm): 2475 Technical Permissible Total Weight: 39 = 12 + 9 + 9 + 9 Wheelbase (WB) Sliding Floor Trailer (mm): 7850 Internal Height Front (mm) (IHF): 2641 Internal Height Rear (mm) (IHB): 2821 Loading Length (mm): 13513 Volume (cbm): 91.3 Total Width (mm): 2550 Total Length (mm): 14000 Chassis Tire Size: 385/65R22.5 Chassis Neck Height (mm): 217 Brake Type: Disc Brake Brake Type: SAF SBS 2220 Offset (ET): 120 Option: 1st axle with optimized starting aid Activation of starting aid via button in the truck (button installation not included in the equipment scope) and by pressing the brake pedal three times Air Suspension: ECAS with lifting and lowering valve Lowering of air suspension via Smartboard, as well as lifting and lowering valve Coupling Head: Pneumatic European Palm Coupling Support Winches: Weweler as steel geared support winches, type Weweler, with compensating support winches, single-sided operation and 2 speed levels Operator Console: EBS operation on the left side in the direction of travel, behind the axles Position Operator Console: Sliding floor on the left side in the direction of travel, behind the axles. Toolbox on the left side in the direction of travel, behind the axles. Manufacturer Lighting: Aspöck Work Lights (operated via switch): 2 pieces LED reversing lights front in the direction of travel on the left and right, mounted in the area of the support winches Hydraulic Coupling: Swivel coupling size ?? Gender: Female Hydraulic Coupling: Return Swivel Coupling Size 1 Gender: Female Hydraulic Coupling: Hose 3,000 mm Hydraulic Coupling: Position Connection possibility on the front wall (also with connection possibility on the support legs) Type: Smartboard ECAS control box Aluminum access ladder 3.80 m on the right side in the direction of travel Broom and shovel holder on the side impact protection on the left side in the direction of travel Sliding Floor System: Manufacturer Cargo Floor Air and electrical console in the middle in the direction of travel with mounting brackets Protection of the lighting unit: One-piece mud flap Hnedpfezxvvvex Aitju Superstructure Inclination Front Wall (): 90 Inclination Rear Wall (): 90 Rear Wall Type: Swing Doors Cover Plate between Floor and Front Wall: Solid aluminum plate and PVC strips Profile Front Wall: 3 mm 2 mm in smooth design inside and outside, double-walled profiles 600 mm wide, 30 mm thick Operation of floor system: Radio remote control Cargofloor Control Type: CF 500 SL-C-?E?-Control 21 floor profiles 10 mm ribbed, residue-free discharge wall Aluminum with brushes Storage residue-free discharge wall: 6 wheels with bidirectional cleaning (loading floor) Design: swing door division ? to ?, with door closing cross member Door closing cross member in swiveling design, aluminum Locking Rear Doors: 1x turning rod / door half Additional locking rear wall: Pneumatic, single-acting Ramm Protection Rear Doors: Aluminum Ramp buffer over the entire width of the rear wall Tensioner for tarpaulin tensioning: Tensioner with handle, mounted on the underside / side wall of the superstructure Walkway on the front wall with access and bracket protection, mounted, design STAS aluminum walkway Position Access Walkway: Access ladder mounted on the left and right side in the direction of travel Step ladder in the rear end: Extendable step ladder, mounted

Condition: used, Elektrohefter für Block- und Sattelheftung Electric Stapler Nagel Rinak for flat block - saddle stapling Elektrohefter  - Electric Stapler Nagel Rinak für Block- und Sattelheftung / for flat block - saddle stapling Neu unbenutzt / brand new Year Serial-No. 3551000 Blockheftung: bis 4 mm ca. 40 Blatt (80 g-Papier) Broschüren: bis 3 mm ca. 30 Blatt (80 g-Papier) Heftklammern: 26/6, 26/8S, Ri 26/6 Anlagetisch lässt sich durch einfaches Kippen zur Block oder Sattelheftung umstellen Heftkopf-Schlagstärke einstellbar Hnodexp H Siopfx Aitou verstellbarer Seitenanschlag Auftischmaschine zur Befestigung an der Tischplatte Kapazität Klammermagazin: 210 Stück Einlegetiefe: 30 mm (bei Blockheftung) Anschluss: 230 V / 50 Hz Maße: B540 x T370 x H360 mm Gewicht (netto): 16 kg Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: new, maximum load weight: 34,200 kg, overall weight: 42,000 kg, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,470 mm, loading space height: 2,820 mm, loading space volume: 91 m³, Year of construction: 2026, Equipment: ABS, Stock no. 5739 Immediately available! Purchase, lease or lease with purchase option available upon agreement! Approx. 91m³ Stas moving floor trailer with 10m floor / radio remote control / front maintenance door / RENTAL / PURCHASE ---- * Manufacturer: Stas * Model: S300ZX Biostar * Year of manufacture: 2026 * Gross vehicle weight: 42,000 kg * Unladen weight (manufacturer specifications): 7,800 kg * Payload: 34,200 kg Hnsdpfoyz H Spox Aitou * Axles: 3x SAF, 1st axle lift axle with starting aid / disc brakes * Tyres: 385/65 R22.5 on steel rims * Suspension: air suspension with ECAS lift/lower function * EBS * Capacity: approx. 91m³ (13.50 m long x 2.47 m wide x 2.82 m high) * Colour: Body RAL 9006 / tarpaulin black SIO7999 / galvanized chassis * Twin rear doors with pneumatic locking * Extendable access ladder on right-hand side * Lift axle starting aid activated via truck control button * Smartboard * Telescopic landing legs * PVC toolbox 830x500x470 mm * 2 LED reversing lights, rear left and right * 2 LED reversing lights at rear supports * 1 LED front wall interior light * Ecoled 2 LED taillights * Cargo Floor 10 mm ribbed CF500SL-C -E Control * V2A stainless steel rear panel * Additional plastic guides below floor profiles * Radio remote control * Moving bulkhead wall * Rolling tarpaulin with Panama tension straps, 900 g/m² * Tarpaulin stoppers * Service door at front * 2 x 3 LED in the door crossbeam * Smartboard German trailer! German papers! NEW VEHICLE! Notice regarding possible listing errors: Despite careful preparation of this listing, occasional errors in the text or details cannot be excluded. We do not assume liability for mistakes, changes or interim sales. All information is supplied without guarantee. Please contact us to verify details or for further questions.

Condition: used, axle configuration: 3 axles, first registration: 11/2002, suspension: steel, tire size: 385/65 R22.5, color: other, Tire size: 385/65 R22.5 Axle brand: ROR Brakes: Drum brakes Suspension: Leaf spring suspension Rear axle 1: Tire tread depth left: 6 mm; Tire tread depth right: 4 mm Hjdpfx Aoz Srbgeitenu Rear axle 2: Tire tread depth left: 8 mm; Tire tread depth right: 8 mm Rear axle 3: Tire tread depth left: 5 mm; Tire tread depth right: 5 mm Damage: None

Condition: used, machine/vehicle number: 1, empty load weight: 8,000 kg, maximum load weight: 30,000 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 10/2005, next inspection (TÜV): 10/2020, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, loading space volume: 92 m³, suspension: air, tire size: 385.65 r 22.5, color: red, Year of construction: 2005, Equipment: ABS, tail-lift, Semi-trailer, STAS, 92 m3 capacity, with a 21-slat moving floor, ideal for waste transport. Features include an adjustable, sealed hydraulic tailgate and a closed roof covering 2/3 of the trailer. Three-axle disc brake system with a steering third axle. Includes a front bulkhead. Year of manufacture: 2005. Valid inspection until 31.10.2020. - DEALER: INTERDRIVE SRL - PARMA. Hnsdpeh I Id Nofx Aitju

Condition: used, Kompakter und wendiger Elektrostapler mit Ladegerät. Compact and maneuverable electric forklift with charger. Elektro Gabelstapler / Eletric Forklift Clark CTM 16 S Baujahr / Year 1998 - Serial-No. CTM145 2765 GEF 7096 3-Rad-Gabelstapler / 3-wheel Fork Lift Tragkraft / forklift lifting capacity max. 1600kg Hubhöhe / Lifting high max. 3300mm Lastschwerpunkt / center of gravity 500 mm Eigengewicht / Total weight 3138kgs Mit Ladegerät / with Charger Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test Hedsz Hwu Tspfx Aitonu

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 155 h, load capacity: 6,000 kg, lifting height: 26,000 mm, fuel type: electric, mast type: telescopic, construction height: 3,100 mm, power: 115 kW (156.36 HP), fork length: 1,200 mm, empty load weight: 18,000 kg, total length: 8,080 mm, drive type: Elektro, construction width: 2,500 mm, Rotating telescopic handler – Electric Mast type: Telescopic Transmission: Hydrostatic Hjdpfxoy Ap Tfe Aitjnu Speed class: 20 Condition: Like new Technical condition: very good Front tire type: Pneumatic Front tire size: 18 - 22 Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire size: 18 - 22 Rear tire condition: 80 - 100% Battery voltage: 700V Battery Ah: 65Ah Battery manufacturer: Manitou Battery type: Lithium-ion Battery year of manufacture: 2024 Battery condition: New Description: 100% electric. The MRT 2660 e is a truly versatile tool for your handling operations, with zero emissions, low noise levels, and low fuel consumption. 6,000 kg maximum capacity, 22 m lifting height. Lithium-ion battery ensures: low maintenance, the possibility of occasional charging (partial and frequent recharging of the battery), and long service life. Modular design: possibility to add a second battery to increase autonomy or a range extender (heat engine that charges the battery) in hybrid mode. All the advantages of the MRT Vision + (visibility, performance, comfort) in 100% electric. 3rd valve, heater, full cab, air conditioning.

Condition: new, functionality: fully functional, Year of construction: 2026, load capacity: 1,500 kg, fuel type: electric, mast type: duplex, power: 2.2 kW (2.99 HP), battery capacity: 20 Ah, remaining battery capacity: 100 %, battery voltage: 48 V, overall weight: 730 kg, color: red, Equipment: CE marking, Elektro-Hochhubstapler 1,5-Tonnen-Elektro-Handstapler mit einer Hubhöhe von 5 Metern Hodpfxezrhzwe Aitjnu Gerbeur électrique 1.5-ton walk-behind electric forklifts with a lifting height of 5 meters Item Unit Specification Product Model ETS Power Unit Battery Basic Parameters Driving Mode Electric-powered travel Rated Load Kg 1500 Load Center mm 500 Tires Tire Type Nylon Wheel Drive Wheel Size (Diameter × Width) mm Φ200*40 Front Wheel Size (Diameter × Width) mm Φ180*50 Rear Wheel Size (Diameter × Width) mm Φ80*93 Additional Wheel (Size) Lift Height mm 5000 Overall Height (With Fork at Lowest Position) mm 2550 Overall Height (With Fork at Highest Position) mm 5500 Fork Ground Clearance (At Lowest Position) mm 90 Basic Dimensions Overall Length mm 1750 Overall Width mm 1000 Fork Length mm 1100 Maximum Adjustable Outer Width of Forks mm 685 Turning Radius mm 1550 Performance Travel Speed (Loaded/Unloaded) Km/h / Lifting Speed (Loaded/Unloaded) mm/s 80/130 Lowering Speed (Loaded/Unloaded) mm/s 110/90 Gradability (Loaded/Unloaded) % / Braking Method Electromagnetic Brake Drive Motor Power KW 0.8 Drive System Lift Motor Power KW 2.2 Battery Voltage/Capacity V/AH 48V/20AH*4

Condition: new, maximum load weight: 28,240 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,480 mm, loading space height: 2,820 mm, loading space volume: 91 m³, Equipment: ABS, New vehicle in stock – available immediately! Buy, rent, or rent with an option to purchase! Side tarpaulin can be retrofitted at an extra cost! Stas 91 m² sliding floor / 10 mm flat floor / TÜV cargo certificate ----* Manufacturer: Stas * Type: BIOSTAR - Sliding floor * First registration: - (New vehicle) * Color: Chassis galvanized, body RAL 7016 silver-grey, tarpaulin SIO 7340 * Volume: approx. 91m³ (13.50m long x 2.475m wide x 2.64m to 2.82m high) * Total weight: 36,000 kg * Unladen weight according to vehicle registration: 7,760 kg * Payload: 28,240 kg * Axles: 3x SAF axles / 1 lifting axle / starting aid / disc brake * Tires: 385/65 R22.5 New on Speedline Diamond aluminum rims * Wheelbase: 7.85m * Suspension: ECAS air suspension with lifting and lowering * ABS / EBS * Cargo Floor CF 500 SL-C with remote control and control box at the rear left * 21 floorboards, 10mm flat * 12 pairs of recessed lashing eyes in the floor * End caps made of aluminum, welded * Complete discharge wall with brushes and stainless steel handles * Service door in the front wall * Double doors (50/50) with pneumatic locking * 2x twist locks for locking * Door closing crossbeam, swiveling * Hydraulic connections at the front with 3 m hoses and * Connection option below the body without hoses * Operating platform with ladder at the front left * Saddle height: 1150mm * Individual mudguards * Full load supports * Aluminum lighting protection at the rear (one-piece, foldable) * Roll tarp (900g/m²) with tension straps * Steel bars, foldable, and tension straps along the sides * 1x toolbox at the rear left * 1x aluminum ladder 3.80m long * Tire pressure gauge * Smartboard * TPMS tire pressure monitoring system * Aluminum bumper buffer at the rear Hjdpev Emk Usfx Aitonu * 1x extendable ladder at the rear right * 2x LED work lights in front of the axles * 2x LED reversing lights at the rear * 1x LED work light in the front wall inside * 2 x 3-function lamps at the top in the door crossbar New vehicle in stock – available immediately! Buy, rent, or rent with an option to purchase! Note on possible errors in the advertisement: Despite careful preparation of the advertisement, individual errors may have crept into the text or the information. We assume no liability for errors, changes or interim sales. All information is without guarantee. Please contact us to verify details or clarify any further questions.

Condition: used, axle configuration: 3 axles, first registration: 02/2005, suspension: air, tire size: 385/65, tire condition: 40 %, color: other, Year of construction: 2005, Equipment: ABS, = Additional options and accessories = - Air Suspension - Disc brakes = More information = Tyre size: 385/65 Make axles: Mercedes Hedpfoz A U Ddsx Aitsnu Brakes: disc brakes Suspension: air suspension Rear axle 1: Tyre profile: 40% Rear axle 2: Tyre profile: 30% Rear axle 3: Tyre profile: 30%

Condition: used, maximum load weight: 30,140 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 07/2014, next inspection (TÜV): 07/2026, loading space length: 10,500 mm, loading space width: 2,500 mm, loading space height: 2,200 mm, loading space volume: 53 m³, Year of construction: 2014, Equipment: ABS, Well-maintained aluminum box body, Stas S300CX, for grain transport. Features: Lift axle Platform at the front wall Roll-up tarpaulin Hedpfx Ajzmdbpeitonu Grain sack Grain slide Combination rear door with 1/3 and 2/3 opening Foldable rear underrun protection Lateral underrun protection Toolbox For questions regarding the equipment, please call. Errors and prior sale excepted!

Condition: used, Elektro Gabelstapler / Eletric Forklift Manitou ME 315 Baujahr / Year 2017 - Serial-No. 3-Rad-Gabelstapler / 3-wheel Fork Lift Tragkraft / forklift lifting capacity max. 1500kg Lastschwerpunkt / center of gravity 500 mm Mit Ladegerät / with Charger Hnsdpfx Aijz Hwx Sotju Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 15 h, load capacity: 2,500 kg, lifting height: 5,850 mm, fuel type: electric, mast type: telescopic, construction height: 1,920 mm, power: 40 kW (54.38 HP), fork length: 1,200 mm, empty load weight: 4,755 kg, total length: 3,894 mm, drive type: Elektro, construction width: 1,813 mm, Telescopic forklift, rigid frame – Electric Load center: 500 Mast type: Telescopic Transmission: Hydrostatic Speed class: 20 Condition: New Technical condition: New Front tire type: Non-marking Front tire condition: 80 – 100% Rear tire type: Non-marking Rear tire condition: 80 – 100% Battery voltage: 100V Battery capacity: 348Ah Battery manufacturer: Manitou Battery type: Lithium-ion Hjdpfx Ajzif N Heitsnu Battery year of manufacture: 2026 Battery condition: 80 – 100% Description: Manitou telescopic handler 625, 100% electric. The first 100% electric Manitou telescopic forklift, specifically designed for use in the construction industry! A compact, versatile machine for all your material handling applications, which is quiet and emission-free without compromising on performance. With a lifting height of 5.85 m, a load capacity of 2.5 t, a ground clearance of 33 cm, combined hydraulic movements, and compact dimensions, the MT 625 e is a true off-road machine, also suitable for work on compact, low-emission construction sites, such as in city centers or indoors. Equipped with lithium-ion batteries and an integrated charger, you can add an additional battery and charger to increase on-site autonomy and charge your equipment faster. 3rd valve, work lights rear, work lights front, heater, full cab, air conditioning

Condition: used, axle configuration: 3 axles, first registration: 09/2013, suspension: air, tire size: 385/65 R22.5, color: other, Year of construction: 2013, Axle configuration Tire size: 385/65 R22.5 Axle brand: SAF Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle; tire tread depth left: 10 mm; tire tread depth right: 10 mm Rear axle 2: Tire tread depth left: 7 mm; tire tread depth right: 8 mm Rear axle 3: Tire tread depth left: 5 mm; tire tread depth right: 6 mm Weights Unladen weight: 5,340 kg Payload: 32,660 kg GVW: 38,000 kg Hedpfx Ajz Hukxsitonu Condition Damage: none