Used Stankoimport 2000 X 6 Mm for sale (110,271)

Condition: good (used), functionality: fully functional, Year of construction: 1990, We are selling a used guillotine shear from Stanko with a cutting width of 2000mm and a material thickness of 6mm. The machine is powered and can be tested. Crane loading is possible. Blsdpfswywmhex Amren

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Dimensions: 2050 x 6 / 4 mm, adjustable cutting angle and cutting gap, rear light barrier. Bljdsz Dbtnjpfx Amron

Condition: good (used), functionality: fully functional, Simple and very robust machine; scope and condition as shown in the pictures; weight approximately 5 tons. Bsdpsz Hpyhefx Amrsln

Condition: used, Cast iron bed 2600 x 2000 x 350 mm Length: 2600 mm Width: 2000 mm Thickness: 350 mm 8 T-slots T-slots dimensions: 55 x 35 mm Blodozzvytopfx Amren Slots spacing: 250 mm Equipped with 12 leveling feet Weight: approx 4,5 T

Condition: good (used), functionality: fully functional, Year of construction: 2004, machine/vehicle number: 4roll 2000x6 mm, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 155 mm, roller (top) diameter: 165 mm, side roll diameter: 120 mm, roller diameter: 165 mm, roller length: 2,050 mm, working width: 2,000 mm, working height: 600 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 8 mm, sheet thickness brass (max.): 10 mm, sheet thickness copper (max.): 10 mm, overall weight: 2,200 kg, total length: 3,400 mm, total width: 1,150 mm, total height: 1,100 mm, power: 2.21 kW (3.00 HP), input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, emergency stop, hardened rollers, -roll 2000x6 mm plate bending machine Davi model MAX2017 year 2004 used plate roll in working condition, Planetary dual pre-pinch Performance Capacity: Plate width 2000 mm plate thickness 6 mm pre-bend 5 mm minimum rolling diameter ID 350 mm rollers length 2050 mm Upper roll 165 mm Pinch roll 155 mm Side rolls 120 mm Power electric motor 3 kw on hydraulic unit Vac 400/50 mm Installed configuration Rollers surface hardened high strength Conical plate rolling, cone bending Hydraulic commands via leverage distributors Infinitely variable speed control Digital position readout --- Hydraulic driven motorized the central rolls Pre-pinch pressure adjustable for pre-bend Drop-end front open to unload closed shells Re-rolling system for calibration of welded shell Safety and emergency stop machine dimension 3400x1150xH 1100 mm -weight 2200kg Bsdpfx Aozy N Afemrsln

Condition: used, CNC Press Brake COLLY 502/A Numerical Command: CYBELEC type DNC 32 P-CM Capacity: Maxi length 2000 mm x 50 T Bljdpfx Aez Hwhyomrjn Throat depth: 200 mm Distance between uprights: 1600 mm Back Gear Gauge 1 axe Defective cylinder Right cylinder joint to change Machine functional (only right cylinder joint to change) Voltage: 380 V Length: 2500 mm Depth: 2100 mm Total height: 2400 mm Weight: approx 4 T

Condition: used, functionality: fully functional, CNC ROTARY TABLE 2000 X 2500 MM TABLE TRAVEL: 2500 MM LOAD CAPACITY: 20 TONS INDEXING: 360,000 POSITIONS Blodpfx Amezzwkmorjn

Condition: used, Pair of cast iron angle plates Drilling diameter: Ø 27 mm Width: 575 mm Depth: 2000 mm Blsdpfx Aez H I Anemrsn Total height: 4000 mm Unit weight: approx 6 T

Condition: like new (used), Year of construction: 2020, Technical data: Working width: 2050 mm Max. bending capacity (mild steel St40): 6.0 mm Max. pre-bending (mild steel St40): 4.0 mm Top roll diameter: 170 mm Side lower roll diameter: 170 mm Central lower roll diameter: 145 mm Cone bending device Hardened rolls Working height: 800 mm Mobile control panel Hydraulic drop-end bearing CE marking Motor power: 2.5 kW Dimensions (L x W x H): approx. 3600 x 1200 x 1200 mm Net weight: approx. 3 tonnes Condition: Bledpfx Aeyzc Iajmrjn Very good, almost as-new condition, very little used The seller is not liable for typographical or data transmission errors. The machine's appearance, technology and wear are age-appropriate; used machines are sold without any warranty.

Condition: good (used), Cast iron marbles Length: 3970 mm Width: 2060 mm Useful surface (L x W x H): 3910 x 2000 x 350 mm Delivered with 6 levelling feet Blsdpfxsz H Ixvs Amrsn Weight: 7 T 2 same plates available.

Condition: used, Granit marble ATELIERS MAITRE Length: 2000 mm Width: 1200 mm Thickness: 400 mm Height on feet: 910 mm Bjdpfsz H Ixisx Amrjln Class 2 Weight: approx 2 T

Condition: like new (used), Year of construction: 2019, Technical Data: Cross-cutting line with punching unit Strip running direction from the operator's side: right to left Coil changing side in strip running direction: left Operator's side, straightening machine in strip running direction: left Raw material: • cold-rolled strip: S320GD; S350GD; S380GD (strip-galvanized structural steels) • plastic-coated steel strip • aluminum • basically dry surface or commercially oiled • laminated strip • stainless steel Uncoiler: Type: Power Coil M-BS 1600 2 coil loading stations The coil storage track is designed so that a distance of 900 mm remains between 2 coils with an outer diameter of 1600 mm Loading semi-automatic Strip width 200 – 1600 mm Max. coil weight: 16 tons Coil diameter inside uncoiler: 508 - 610 mm Coil diameter outside uncoiler: 900 - 1600 mm Spreading range 470 – 625 mm Machine frame movable on linear guides Spreading hydraulically Strip withdrawal from the coil automatically Coil side guidance automatically, 4-point coil side guidance Press roller, rubberized, centrally positioned on the strip, hydraulically Electrical locking of lifting and traversing movement Control system: Control concept LBF – Control Concept LSV SCHULER Cross-cutting shear: Type: SCHULER HSU-1600 Shear gap adjustment is carried out by motor The shear is used to cut the strip end at a right angle before processing the first part of a production sequence. Bridging roller bed: Bodpfx Amezzrutsreln Arrangement of the bridging roller bed upstream of the straightening machine Type: VOMA C1600 N Passage, max. strip width 1600 mm Length of bridging roller bed 1050 mm Material running height in the straightening machine 1600 mm Straightening machine: Type: SCHULER SVH 12-53-70-96 / 160-1600 Straightening speed max. 60 m/min. Straightening speed min. 5 m/min. Number of straightening rollers 12 pcs. Diameter of infeed rollers 160 mm Diameter of straightening rollers 3 x 53 mm, 3 x 70 mm, 6 x 96 mm Loop radius 1600 mm Material running height in the straightening machine 1600 mm Strip side guidance automatically Support rollers to prevent roller deflection All-roller drive Looping unit: Threading process in the direction of roller feed via looping bridge, remote-controlled Automatic loop control for continuous straightening process Loop depth below floor approx. 2,500 mm 4-point guidance through 2 sequentially arranged strip side guides To increase feed accuracy, the feed length is recorded by means of a measuring wheel (arranged in front of the feed rollers) Roller feed: Type: SCHULER AC-RP-160-1600 Feed rollers, diameter 160 mm Loop radius 1600 mm Material running height above floor 1200 mm Drive, upper and lower roller, servo drive via a common distributor gear Special coating of the feed rollers Max. acceleration 15 m/s² Brake rollers: Brake rollers generate the strip pull during the rewinding of the strip material from the system onto the coil, in a generator-like manner Adjustment system hydraulically Punching unit with NC tool holder: Type: SCHULER HSU-1600 Design: Double C-frame Punching unit designed as 2 C-frame units, which can be traversed transversely to the strip direction by means of 2 servomotors, for accommodating the punching tools Number of punching tools per side max. 6 pcs. Punching tool, servomotor-driven, 90° rotatable 1 punching cylinder per punching tool Punching force min. 580 kN Max. hole diameter ∅ 90 mm for material thickness 4 mm Manufacturer of punching tools: WILSON TOOL Elevating table: Type: LAWE

Condition: used, Rotating Boring Table Travel X: 2000 mm Table size: Length 1240 mm x Width 1250 mm Bench width: 1030 mm Diameter of the ball screw: Ø 70 mm 2 motors INDRAMAT: 1 travel X motor + 1 table rotation motor Supplied without electrical panel (electrical cabinet to be redone) Bjdpozwuu Ijfx Amroln Protector hennig in average condition Ideal part for retrofitting Total bench length: 5200 mm Width: 1900 mm Height: 900 mm Weight: approx 7 T

Condition: used, Year of construction: 2003, Planer Bsdpozy Urljfx Amrjln Rollers no. 17 Diameter 42 Belt width 2,000 mm. Minimum thickness 0.5 mm. Maximum thickness 3 mm.

Condition: excellent (used), Year of construction: 1998, Technical data: Working width: 2000 mm Bending capacity: 25.0 mm Pre-bending: 20.0 mm CNC control Top roller diameter: 320 mm Bodpfxev Htnij Amroln Middle roller diameter: 320 mm Side roller diameter: 240 mm Hardened rollers Conical bending device by tilting the two side rollers Mobile control panel with digital display Engine power: 11 kW CE mark Dimensions (length x width x height): approx. 4500 x 2000 x 1900 mm Weight: approx. 11 tons The seller is not liable for typing or data transmission errors. The machine's appearance, technology and wear are in keeping with its age; used machines are sold without any warranty.

Condition: good (used), functionality: fully functional, Cutting length: 2020 mm Max. sheet thickness at 400 N/mm²: 5 mm Max. sheet thickness at 750 N/mm²: 3 mm Cutting angle approx.: 1.5° Bsdjz Ig I Eopfx Amreln Strokes per minute: 40 strokes/min Back gauge approx.: 750 mm Stand throat depth: 200 mm

Condition: like new (used), Year of construction: 2019, load capacity: 1,200 kg, lifting height: 6,500 mm, construction height: 3,000 mm, operating hours: 1,874 h, fuel type: electric, mast type: triplex, Manufacturer + model: JUNGHEINRICH EKS 312 Mast: P + F - 3F6500 ID: 25116.5772 Category: Used Mast: 3F Lowered height: 3000 mm Lifting height: 6500 mm Capacity: 1200 kg / 600 kg Platform height: 6500 mm Order picking height: 8100 mm Cabin width: 1400 mm Year: 2019 Operating hours: 1874 hours Battery: 48 V / 620 Ah Options: - Triplex mast - FFL Bodpfx Amezv Rw Aersln - SPECIAL platform!!!! (L x W = 2000 x 1400 mm!!) - Guidance rollers on the safety gates – complete, LIKE NEW!!

Condition: used, Year of construction: 1985, sheet thickness: 2,25total power requirements: 1,1sheet length: 2025 Working length: 2025 mm Kl. Tail width: 5 x s Kl. Inner radius: 1.5 - 2 x s Adjustability of the lower and bending beams: 90 mm Bjdpfovaatfjx Amreln for round bends: 90 mm Highest working position of the upper beam: 190 mm large opening width of the upper beam: 290 mm Duration of a workflow: 7.0 sec. External dimensions approx.: 3000 x 1000 x 1650 mm with: - Control panel on the right side of the machine - Simple bending angle adjustment on the control panel - Choice of switching to automatic, semi-automatic or typing mode - Potentiometer for degree adjustment -Foot switch used, in good condition

Condition: not inspected (used), Year of construction: 2022, load capacity: 2,000 kg, Mobile Portal Crane ABUS LPK IF INTERESTED, FURTHER IDENTICAL CRANES ARE AVAILABLE! Year of Manufacture: 2022 Machine Number: 153-002730 Condition: Uninspected Delivery Terms: Free loading onto truck Bodpfx Amozqfn Eoroln Location: 21493 Elmenhorst-Lanken Availability: Immediately - by arrangement Payment Terms: Prepayment - by bank transfer Internal No.: 174-2 Technical Data: Crane bridge / crossbeam: approx. 3,280 mm Crane bridge profile height: approx. 240 mm Length of longitudinal beams: approx. 4,600 mm Length of running/foot beams: approx. 1,980 mm Height of running/foot beams incl. rollers: approx. 400 mm Lifting Gear: ABUS Electric Chain Hoist Type: GM 6 2000.3-2 Load capacity: 2,000 kg Lifting speed: 0.80 / 3.00 m/min Power supply: 400 V / 50 Hz Equipment: Electrically driven chain hoist / load hook (left/right) IF INTERESTED, FURTHER IDENTICAL CRANES ARE AVAILABLE! Scope of delivery: Existing documentation as shown in the images Dimensions & Weights: Installation dimensions L x W x H approx.: 3600 x 2000 x 5000 mm Transport dimensions L x W x H approx.: 4600 x 1500 x 1500 mm Weight approx.: 500 kg If you have any questions or would like to arrange a viewing, please do not hesitate to contact us! Additional Notes: ►Upon request, we can offer transport to the destination. ►The quoted price is net, plus VAT. ►The goods are sold with the exclusion of any warranty. ►Technical data subject to change without notice. ►Subject to prior sale. ❗The sale of the goods is exclusively to business customers❗

Condition: used, Parallel Lathe CAZENEUVE type HB 575 Between points: 2000 mm Maxi Ø on bench: 575 mm Bodpozwfdmsfx Amreln Maxi Ø over saddle: 300 mm Spindle diameter: Ø 51 mm Rotation: from 20 to 1600 RPM Turret TRIPAN 411 3-jaws chuck Ø 200 mm Spindle motor: 15 CV ThreadingsMetric + Whitworth Tailstock CM5 Lubricant tank Lubricant pump Supplied with 3 TRIPAN tool holders Voltage: 380 V Length: 3500 mm Width with tank: 1500 mm Total height: 1400 mm Weight: approx 3 T

Condition: used, Year of construction: 1977, functionality: fully functional, Headstock and faceplate lathe with sliding bed This machine can be used for normal turning operations, as well as with the bed shifted by approximately 500 mm, for large diameters up to 2000 mm. This makes the machine very space-saving. It is a special lathe for both normal and large workpiece diameters due to this sliding bed feature. Manufacturer: Ravensburg Model: 1500 x 2000 mm Year of manufacture: 1977 Bedpfxezxgr Uo Amroln Faceplate diameter: 1500 mm Center height in the saddle: 1000 mm with the bed shifted Workpiece diameter in the saddle: 2000 mm Turning length: 2000 mm Simple tool holder: 90 mm high Top slide with automatic feed: 500 mm Top slide, transverse: 400 mm Cross slide: 700 mm 3-way bed, width: 240; 150, 150 mm L x W x H: 5400 x 2300 x 2300 mm Weight: approx. 14 tons

Condition: like new (used), functionality: fully functional, Year of construction: 2024, control type: NC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: SIEMENS, controller model: PLC, number of rollers: 4, roller (bottom) diameter: 150 mm, roller (top) diameter: 150 mm, side roll diameter: 140 mm, roller diameter: 150 mm, roller length: 2,050 mm, working width: 2,000 mm, roller height adjustment: 18 mm, working height: 800 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, overall weight: 2,800 kg, total length: 3,800 mm, total width: 1,200 mm, total height: 1,100 mm, power: 3 kW (4.08 HP), input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 4, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, 4 ROLL BENDING MACHINE NC HYDRAULIC MODEL 2000X6 MM / 4 MM PREBEND PROGRAMMABLE AUTOMATIC ROLLING NC 4 AXIS CONTROLLER Capacity: plate width 2000 mm thickness rolling 6 mm pre-bending 4 mm minimum diameter of rolling D= 180 mm depending on the plate thickness and strength Rollers length 2050 mm Upper roll size 150 mm Lower roll size 150 mm Rollers hardened surface high strength smooth surface finishing suitable for rolling stainless steel quality plates Blodow Hpzwspfx Amren Conical plate rolling attachment Rotation electric powered on central rollers for bending traction of the plate Pre-pinch load variable upon plate thickness and strength Console electric commands push buttons with digital readout of the 4 rollers on the screen. NC programmable 4-axis to set automatic rolling with save 200 programs in memory front side hydraulic opening to remove the rolled shells speed slow/fast variable safety installation with emergency stop. Instruction manuals for operation and service. Layout mm 3800x1200xH1100 mm Weight 2800 Kgs

Condition: used, Item No. 16191 Bsdpozibw Hsfx Amroln T-slot plate Technical data: - Plate length approx. 3000 mm - Plate width approx. 2000 mm - Plate height approx. 310 mm - Thickness of the top plate approx. 70 mm - 8 T-slots in the table surface, length 3000 mm - Center distance of the T-slots in the table surface: 250 mm each - Center distance of the T-slots from the outer edge: 125 mm - T-slot width approx. 21 / 31 mm - T-slot depth approx. 30 mm - 4 adjustable support feet - Space required: L 3000 x W 2000 x H 810 mm - Weight approx. 4200 kg

Condition: excellent (used), Technical specifications: Retrofit in 2026 Working length: 2550 mm Max. bending capacity: 6.0 mm Bending allowance: 4.0 mm Diameter of upper roller: 200 mm Diameter of lower roller: 180 mm Hydraulic folding bearing Bsdpfxszbcwms Amroln Taper bending device Control panel with digital display Motor power: 5.5 kW Dimensions (length x width x height): approx. 3600 x 1150 x 1250 mm Weight: approx. 4.5 tons Condition: Very good, retrofit in 2026 The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: repair required (used), functionality: not functional, Circular shear, capacity 1500 x 6 mm, pneumatic system needs to be completely or partially renewed. Bledpfszq Sqaex Amron