Used Stacker Pst 26/36/480 for sale (14,822)

Condition: refurbished (used), advand PST 26 Stacker Euro 1.280.- advand PST 36 Stacker Euro 1.480.- Iijdevgmlzjpfx Am Hsg advant PST 36L Stacker Euro 1.680.- advand PST 480 Stacker Euro 2.180.- advand PST 480L Stacker Euro 2.380.- all stackers checked and fully operational

Condition: like new (used), Year of construction: 2005, operating hours: 7,000 h, ONLY PRODUCED FOR 7000HRS Overall Belt width - 660mm Effective Belt width - 610mm Belt length/Tier - 13.28 Effective Belt length - 478.08 Effective Belt area - 245.95m2 Tiers - 36 Tier pitch - 145mm Maximum product height - 73mm Iijdpforfclqex Am Heg Drum Diameter 2905.76mm EVAPORATOR Duty - 210kw Evap Temp - -40c Installed power - 32.55kw Infeed Height - 800mm Outfeed Height - 6200mm Infeed/Outfeed Length - 200mm Full CIP covering all areas. Absolutely mint condition. GEA GRASSO PLANT COMPLETE WITH AIR COOLED CONDENSOR 240KW DUTY. AGAIN ONLY 7000HRS RUN TIME REVERSE CYCLE DEFROST AFTER 120HRS WITH WATER SPRAYBARS. More photos available through WhatsApp

Condition: used, Year of construction: 1997, machine/vehicle number: IntNr231498, Iisdpfx Ajzzpx Ajm Heg

Condition: like new (used), Year of construction: 2015, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 151515, input voltage: 400 V, GERNEP Rollfeed 8-480 labeller. Up to 8,000 bottles/hour. Year of manufacture: 2015. Supported formats: 0.5L, 1L, 1.5L, 2L. The equipment was purchased from the bankruptcy of a Belgian company specializing in production lines. The machine appears to be as new—everything indicates it was set up for production, but it never left the plant that prepared it for operation. Label counters show just 9,000 units. The machine has no damages, the computer switches on and displays all system messages. In the attached photos, the system date is not set, which is why the current messages show a 2009 date. However, the machine was manufactured in 2015. Additionally, included is a full pallet of spare parts and plates for labelling 1L bottles. Iisdox Hph Dopfx Am Hog This is truly an excellent offer—the machine is practically new, the price is very attractive and non-negotiable! The video shows an identical machine in operation.

Condition: good (used), functionality: fully functional, 1 x Chip conveyor Iisdpozz I I Nsfx Am Heg GS Industrietechnik Type: K-I-150 Year of manufacture: 2017 Suitable for Traub TD 16/26/36 The chip conveyor can be inspected while powered on.

Condition: good (used), Year of construction: 2008, operating hours: 2,500 h, load capacity: 1,200 kg, lifting height: 1,400 mm, fuel type: electric, mast type: duplex, construction height: 2,100 mm, mileage: 2,500 km, The WIDE-TRACK stacker from the brand is from 2008 and in good condition; Capacity 1,200 kg; Lifts up to a height of 1,400 mm. Clearance height is 2,100 mm. Only 2,500 operating hours; Equipped with stainless steel forks! Outside fork width 88 cm, inside 69 cm; Gel battery is maintenance-free and comes with external charger. Watch the video on YouTube. Isdpfx Ajy R Aqtem Heig

Condition: used, mileage: 1,168,700 km, power: 353 kW (479.95 HP), first registration: 11/2013, fuel type: diesel, overall weight: 26,000 kg, color: yellow, gearing type: mechanical, Total allowable weight: 26000kg Iiodpfx Aev Nzxbsm Hsg

Condition: ready for operation (used), Year of construction: 1985, machine/vehicle number: 1304, functionality: fully functional, pressing force: 367 t, stroke length: 100 mm, table width: 525 mm, table length: 430 mm, table height: 800 mm, No minimum price – guaranteed sale to the highest bidder! EXW – Buyer is responsible for dismantling and loading! The machine was rebuilt in 2018! Iijdpfx Aozx S E Tem Hjg TECHNICAL DETAILS Press force: max. 3,600 kN Ram stroke: max. 100 mm Ram adjustment: 40 mm Stroke rate: 40 strokes/min Table area: 430 × 525 mm Table height: 800 mm MACHINE DETAILS Connected power: 7.5 kW Mains connection: 3-phase, 380 V, 50 Hz Control voltage AC: 220 V Control voltage DC: 24 V Main motor power: 7.5 kW Oil capacity: 50 l Ambient temperature: +5 °C to +40 °C Average temperature over 24 h: max. +35 °C Humidity: 30–95 %, non-condensing Altitude: 1,000 m above sea level Noise level: ≤ 70 dB Dimensions & Weight Dimensions (W x D x H): 1,200 x 2,000 x 2,400 mm Space requirement: approx. 1,500 mm Machine weight: 8,000 kg Control cabinet dimensions: 800 × 1,200 × 300 mm Control cabinet weight: approx. 100 kg EQUIPMENT Operating manual Testing information Digital documentation Note: Induction unit is not included in the scope of supply.

Condition: excellent (used), 4-SIDED SIZING-SHAPING LINE (currently for Internal Doors). Iedpfewzmbqsx Am Hjig Composed by of the following machines: X10023A) Motorized infeed rollers table "CELASCHI"" X10023B) Double End Tenoner "CELASCHI" Mod. TSA 3 B 480 A Installed power KW 65 X10023C) 90° Motorized Transfer ("L-shape") conveyor "CELASCHI" Mod. X10023D) Double End Tenoner "CELASCHI"" Mod. TSA 2 B 360 Installed power KW 60

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, operating hours: 3,023 h, load capacity: 1,400 kg, lifting height: 4,350 mm, free lift: 1,400 mm, fuel type: electric, mast type: triplex, construction height: 1,920 mm, battery voltage: 24 V, fork length: 1,150 mm, front tire type: polyurethane tires (black), rear tire type: polyurethane tires (black), overall weight: 1,326 kg, total height: 1,920 mm, total length: 1,950 mm, total width: 800 mm, fuel: electricity, STILL EXV 14 i – Electric pedestrian stacker TECHNICAL DATA Lifting capacity: 1.400 kg Lifting height: 4.350 mm Closed height: 1.920 mm Free lift: 1.400 mm Mast: Triplex (3F435) Fork length: 1.150 mm Drive: Elektro 24V Battery: 24 V GEL Charger: Einphasig 24 V 36 A Gel Iodpfx Amjz Ap I Ho Hoig Tyres: Polyurethan Poly Service weight: 1.326 kg Length: 1.950 mm Width: 800 mm Year of manufacture: 2019 Operating hours: 3.023 h Condition: ready to drive EQUIPMENT Pulse control, Initial lift Internal no.: 1309288 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: good (used), Year: 2014 Size max 360 x 310 mm min 140 x 100 mm Book block thickness max 60 mm min 3 mm Cover size max 642 mm min 203 mm Iiodpfozbux Nox Am Heg Speed max 15.000 c/h Consisting of: Gathering machine Müller Martini 3697 Description: - air pump - blower - Chain tensioning station - Number of gathering stations: 12 - ASIR Automatic Signature Image Recognition: III - ASAC automatic self adjusting calliper - 10 Stream feeders 3741 - 3 Bundle clamp: Müller Martini Bundle clamps - 1 Reject gate 3717 for incomplete products - 2x 3643 Intermediate element with vibrating - 1x 3642 Book Block feeder base - Transfer into the binder Perfect binder Müller Martini Corona C15 S/36 (18") Year: 2014 Description: - Book Data Center BDC - Semi automatic setting - Commander with touch screen - Main milling station - 1st spine preparation station - 2nd spine preparation station - Brushing station - Base for 1st spine glue system - 1st hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: ICS C80 - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit: Robatech MOD - Stream cover feeder - Scoring station - Nipping and pressing station - 2nd nipping and pressing station - Lay down device Transport system - Trasportbelts aprox 70 meters - Escape delivery Three knife trimmer Müller Martini 3675 Orbit Description: - Colour monitor with touchscreen - Semi automatic setting - Right hand infeed - Integratedcounter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 4 - 17 Book stacker Müller Martini 3632 CB 18 Description: - Compensating stacker - Delivery to the left and right Pile tacking device Müller Martini 457 Option: - 2 Card gluer

Condition: excellent (used), functionality: fully functional, product length (min.): 600 mm, product length (max.): 2,200 mm, Storti Stacker. Video grabed on 6/1/26 Consisting of: Two separating band conveyors Iodpfx Aszdkkrom Heig Storti stacker

Condition: like new (used), Year of construction: 2024, functionality: fully functional, For sale is a like-new Hundegger Speed-Cut SC480, including a fully automatic loading system, Pick & Feed 1000. Speed Cut SC480 Processing range: - Timber cross-sections from 20 × 40 mm to 240 × 480 mm - Timber lengths up to 13 m Equipment: - 5-axis sawing unit - Infeed and transfer cross conveyor for timber lengths up to 13 m - Hydraulic lifting table for timber lengths up to 13 m - Combination support for vertically operating tools - Drilling unit 3 kW, drilling direction vertical - Vertical finger milling cutter 6.5 kW - 4-axis revolving milling cutter 7.5 kW - Drilling unit 3 kW, drilling direction horizontal - Single-blade milling cutter - Marking device at the rear - Inkjet labeling system HP (from the rear) - Label printer at the control panel - Central lubrication - Additional screen at the control panel - Additional screen in the discharge area - Floating dust extraction Isdez Da Htjpfx Am Hsig Pick & Feed 1000 Fully automatic loading system: - For timber lengths up to 13 m - 10 rack positions Special features: - System has been in operation since January 2025 - Extensive special equipment - Immediately ready for use - Ideal for timber construction, prefabricated construction, and joinery businesses Inspection: The machine can be inspected by appointment. We will gladly provide further technical information, photos, or videos. Location: Switzerland, Canton of Bern

Condition: good (used), Year of construction: 2018, Last one of 6 high-lift pallet trucks, electric reach stacker 2t, Jungheinrich, ERD 220 – used: Special price as this is the last unit and the lifting height is only approx. 1.66m: Price ex-works: only €2,950 (net) instead of €5,500 (net)! Manufacturer: Jungheinrich Type: ERD 220 Year of manufacture: 2018 and 2022 Lifting height: approx. 1.66m Overall length: 2,084 mm Width: approx. 77cm Fork length: approx. 1.19m 24 V Travel speed: 12.5 km/h Working aisle width (pallet 800x1200 lengthwise): 2310 mm Lifting speed without load: 0.32 m/s Operating hours: see list, as of January 2026 – a few hours have been added since then Incl. charger Weight incl. battery approx. 1,200kg Condition: good Available: immediately Location: Warehouse Frankenberg / Saxony Pos: 8 / 2 / 39 / 31 / 20 / 21 – more photos of the other units available upon request! BH 1/26 Year of manufacture ERD02 90548601 High-lift pallet truck ERD 220 8,060 2018/4 ERD04 90548603 High-lift pallet truck ERD 220 7,685 2018/4 ERD05 90548609 High-lift pallet truck ERD 220 5,500 2018/4 ERD06 90548610 High-lift pallet truck ERD 220 8,743 2018/4 ERD07 90569686 High-lift pallet truck ERD 220 Iisdpfx Ameyrrlze Hsg 4,384 2018/10 98350674 High-lift pallet truck ERD 220 1,951 2022/3

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, total width: 5,440 mm, total height: 2,000 mm, total length: 1,700 mm, No minimum price – guaranteed sale to the highest bidder! MACHINE DETAILS Voltage: 380 V Current draw: 85 A Fuse rating: 100 A Power: 38 kW Iiedpfszzbc Tjx Am Hjg Dimensions (L x W x H): 1,700 x 5,440 x 2,000 mm Shipping packages: 1 unit EQUIPMENT Documentation CE marking

Condition: used, Year of construction: 2021, operating hours: 3,304 h, functionality: fully functional, Basic Package AK 640 SA Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm Semi-trailer chassis with 3 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EU directive Tyres 385/65 R22.5 Permissible total weight 32,000 kg Hydraulically adjustable support legs Splash protection (internal and lateral mudguards) Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm, complies with EUROMOT V emission standard Additional hydraulic connection 20 l/min Load-dependent control of material feed incl. automatic scraper floor reversal Separate drive for feed roller and scraper floor (twin drive) Fuel tank 2 x 450 litres Feed roller: length 1,690 mm, diameter 510 mm, with attached tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: Flail tip "Streusel plus" Impact plate with teeth Centrally positioned wear strips Electric pump for actuating cylinder functions (e.g., raising/lowering support legs and opening/closing rear hopper, folding/unfolding rear conveyor, releasing drive system) when the engine is off 24 V electrical control Isdoxx Tigepfx Am Hjig Separate control box at rear of machine Hydraulically foldable fine shredding basket Multimesh (mesh size from 30 to 280 mm, gradations upon request) incl. one-piece rear flap Rear conveyor: belt length 7,500 mm, belt width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, incl. anti-magnetic central section Under belt: belt length 3,800 mm, belt width 1,400 mm Moistening device for external water connection Scraper floor with 71 slats Wear protection in the drum section Reinforcement plates on the infeed hopper (wear-resistant steel) on both sides for side wall Complete radio remote control Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paintwork: RAL 2011 deep orange Additional Equipment: Hydraulic drive Scraper floor chain lubrication NEODYM overband magnet Frame for overband magnet Central lubrication Engine compartment protective plate Lighting package: engine compartment and rear conveyor Watering system Delivery date to be arranged Available from 06/2026

Condition: used, Year of construction: 2008, functionality: fully functional, type of input current: three-phase, working width: 740 mm, stack height: 750 mm, overall weight: 2,445 kg, total height: 1,617 mm, total length: 3,880 mm, total width: 1,640 mm, input voltage: 380 V, Equipment: compressor, documentation/manual, Machine configuration: Horizon AFC-744AKT folding machine with palett feeder Horizon MKU-54 mobile knife unit Horizon PST-40 press stacker unit Iedpfx Aey R Aufsm Hsig The machine is made in 2008 Counter status is: approximately. 93M Machine condition: used, full funncional The machine is in stock, it is possible to check and test Our company is official dealer and service of Horizon, our service technicians checked the macchine(s), everithing works perfectly. If need we can do demo or test on the machine.

Condition: excellent (used), Year of construction: 2015, Extraction unit HURRICAN JSS-3-6-44-800, year of manufacture 2007/2015. Current air volume flow: 87,900 m3/h. Filter area: 796 m2. Maximum surface load: 130 m3/m2/h. Reserve capacity: 15,800 m3/h. Length approx. 8,950 mm + return air. Width: 2,950 mm. Height: 9,720 mm. Dust type: wood chips/dust. Iiedpev Dfr Uefx Am Hjg

Condition: used, TECHNICAL DETAILS - Number of spindles : 9 - Bar capacity : 26 [mm] MAIN SPINDLES 1 TO 6 - Nominal torque : 18.5 [Nm] - Max. spindle speed : 7000 [rpm] - Stroke X : 70 [mm] - Stroke Z : 125 [mm] MAIN SPINDLES 8 AND 9 - Nominal torque : 15 [Nm] - Max. spindle speed : 10000 [rpm] - Stroke X : 110 [mm] - Travel Z : 125 [mm] COUNTER SPINDLE 7 - Nominal torque : 15 [Nm] - Max. spindle speed : 10000 [rpm] - Stroke Z : 300 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Installed power : 109 [A] DIMENSIONS - Floor dimensions : 9.100 x 1.805 [mm] - Machine height : 2,800 [mm] - Machine weight : 18.500 [kg] MACHINE HOURS - operating hours : 82000 [h] EQUIPMENT - CNC Siemens Sinumerik 840D - Chips conveyor - Bar loader : SIR 36/33 F - Coolant tank : KNOLL VRF 450/2600 * with high pressure pump Ijdpfsuhaq Iex Am Hjig * with paper filtration * capacity : 2600 [l]

Condition: used, Year of construction: 2021, machine/vehicle number: K3999, functionality: fully functional, operating hours: 5,384 h, power: 14.6 kW (19.85 HP), input voltage: 400 V, input current: 29 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, feed rate X-axis: 10 m/min, total height: 1,430 mm, total length: 5,250 mm, total width: 1,230 mm, overall weight: 1,700 kg, Equipment: CE marking, documentation/manual, Hebrock K36 AIRTRONIC edge banding machine – zero joint, 2021, low mileage We are selling a single-sided edge banding machine from Maschinenbau Hebrock GmbH (Hüllhorst, Germany), model K 36 with AIRTRONIC system, machine number K3999, year of manufacture 2021. The machine is currently in operation at our facility – fully functional and ready for immediate use. Zero joint – this is what sets this machine apart. The edge banding machine is equipped with an Airtronic hot air unit. Compressed air heated to 300–600 °C is directed through a nozzle directly onto the functional layer of the edge band, just before the pressing zone – the edge band fuses with the panel without a visible glue line. In practice, this means the ability to edge band acrylic, high-gloss, and lacquered fronts with quality comparable to laser technology, without investing hundreds of thousands of zlotys in a laser machine. This is the most expensive and rarest option in this class of edge banding machines – on the used market, there are literally only a few machines with a zero joint available across Europe. Iijdpozvu Eksfx Am Hjg The machine can also operate in a conventional mode, using standard EVA and PUR hot melt adhesive. Mileage – documented by the machine’s counters: Operating hours: 5,384 mth Length of edge band applied: 619,339 m (619 km) Parameter Value Type K 36 Machine number K3999 Year of manufacture 2021 Voltage / frequency 400 V / 50 Hz Rated current 28.9 A Total power 14.6 kW Operating hours 5,384 mth Edge length 619,339 m Machine name Single-sided edge banding machine with Airtronic zero joint Machine number K3999 Functionality Fully functional Operating hours 5384 Live demonstration possible Weight / dimensions 1700 kg · 5250 × 1230 × 1430 mm Input current 28.9 A (rounded to 29) Workpiece height 60 mm X-axis feed 10 m/min Edge thickness 3 mm PRICE 250,000 NET

Condition: used, mileage: 785,000 km, first registration: 03/2000, fuel type: diesel, axle configuration: 6x2, fuel: diesel, color: other, Year of construction: 2000, Front axle: Steering Rear axle 1: Double wheels Rear axle 2: Steering Registration number: BELGIUM = Dealer information = Ijdpezy Ercsfx Am Heig Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, empty load weight: 1,720 kg, operating speed: 10,700 mm/s, roller width: 2,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Rigid material Workpiece height: max. 50.8 mm Workpiece weight: max. 34 kg/m² Roller material Width: min. 900 mm – max. 2,200 mm Weight: max. 50 kg Diameter: max. 240 mm Maximum printing speed: 64.2 m²/h (in express mode) MACHINE DETAILS Dimensions & weight Dimensions: 3,080 × 2,500 mm Weight: 1,720 kg EQUIPMENT RIP (see images) Note: The machine heads need to be replaced. The seller can offer a complete service for this. Iijdpfx Aezxgnvom Hjg

Condition: good (used), Year of construction: 2016, 2016 Tornos DT 26 Swiss Type CNC Sliding Head Lathe With Fanuc Series 31i-Model B Control & Tornos SBF326-3.2M Bar Feeder Maximum Bar Ø25.4mm. Rapid Traverse 32m/min. Standard Workpiece Length With Guide Bush 225mm. Standard Workpiece Length Bushless 50mm. Main Spindle- Spindle Speed Range 0-10,000rpm (10.5kW Motor). Maximum Turning Tools 6 (Shank 12 x 12mm.). Number Of Frontal Tools (Main-Operation/Counter-Operation) 4/4. Max Front Drilling Ø12mm, Max Front Tapping M10 x 1.5.Cross Drilling/Milling Tools 6 (ER20), Max Rotating Tool Speed 6,000rpm (1kW Motor), Max Front Drilling Rotating Tools Ø10/Ø10mm, Max Front Tapping Rotating Tools M5 x 0.8. Counter Spindle-Maximum Bar Ø25.4mm. Main Spindle- Spindle Speed Range 0-15,000rpm (5kW Motor). Max Insertion Length Of Workpiece Into Counter Spindle 100mm. Max Standard Length Of Workpiece 120mm. Max Back Drilling Ø10mm, Max Back Tapping M6 x 1. Cross Drilling/Milling Tools 6 (ER20), Max Rotating Tool Speed 6,000rpm (1kW Motor), Max Front Drilling Rotating Tools Ø10/Ø10mm, Max Front Tapping Rotating Tools M5 x 0.8. Counter-Operation-Max Number Of Tool Positions 8, Max Rotating Tool Speed 7,200rpm (1kW Motor). S/No. 2581050017 (2016). Please note a loading charge of £200 + VAT to be added to buyer's invoice. Iiedpfx Amez Dg Eve Hog With Coolant System, Hennig Chip Conveyor, Krauft Bauer Fire Suppressor Unit, SEI Mist Extraction Unit, Parts Catcher, Parts Conveyor, Signal Tower, Tool Kit, Cromar Swarf Bin & Manuals. Overall Dimensions L2,230 x W1,250 x H1,730mm. Weight 2,400kg.

Condition: used, mileage: 567,000 km, first registration: 11/2021, overall weight: 18,000 kg, axle configuration: 2 axles, emission class: euro6, Color: red, Euro 6 engine, STANDARD SPECIFICATION Passenger seat: Basic Adaptive Cruise Control with FCW and AEBS-3 Lane Change Warning System Front: 8.00 t, parabolic suspension, 163N Rear: 13.00 t, air suspension, SR1344 Goodyear RR, not applicable Emissions standard: Euro 6 Automated gearbox, TraXon, 12 speeds Standard component layout AdBlue® tank 90 l, on left fender DAF Connect Air-suspended cab External sun visor 'green translucent' Skylights Central locking, 3 keys, 2 remote controls Fixed roof spoiler for Super Space Cab Side fenders Side skirting Headlamp trim and bumper: cab color Lower part trim, cab color/left fender, driver’s side Air intake, handle, and mirror housing black Cab color for roof spoiler Side fender color: cab color Side skirt color: cab color Steering wheel, leather, color black Driver's seat: Luxury Air Passenger seat armrest Coolbox or refrigerator Preparation for pneumatic device Lower sleeper bed with 65-liter drawer Upper sleeper bed Curtains with separation curtain Roller blind passenger side Preparation for roof hatch for stationary air conditioning Accessory power supply: standard + 2x 40 A Digital tachograph, VDO 1C Speed limiter setting: 85 km/h Navigation preparation Truck navigation radio, 6 speakers Truck phone Antennas: AM/FM, 2x mobile, GNSS Extra: CB Predictive Cruise Control DAF Night Lock Turn assist R1,315/70R22.5 GO KMAXD2 154/150 L Traction CBA MX-13 engine, 355kW/483hp Cab emblem: 480 Rear axle ratio 2.21 OBD, Euro VI Step D ZF-Intarder Wheelbase 3.80 m / rear overhang 0.99 m Batteries in rear overhang, no spare wheel carrier Aluminum fuel tanks 845+430 L, step height 620mm Fuel tanks left and right JOST JSK37C, cast iron, 150 + 26 mm Electrical trailer connections 24V/2x7-pin cables: 2x7>15-pin + EBS Analog bodybuilder signals and warnings Chassis with analog connection for engine speed control First gearbox PTO NH/4c-R-32/25 Alternator 80 A, batteries 2 x 210 Ah AGM Battery energy monitoring Max. GCW drive axle 44,000 kg, class 2 Dust shield Extended maintenance interval Standard tool kit Standard fuel quantity + 30 liters, total tank capacity 1275, refrigerator Ijdpfxszvt S Ne Am Heig

Condition: ready for operation (used), Year of construction: 1978, functionality: fully functional, overall weight: 9,000 kg, TECHNICAL DETAILS Foot cone angle: 15–55° Pitch circle diameter: 152 mm Tooth height with 21° finishing milling cutter: max. 10.7 mm Tooth height: max. 14.8 mm Tooth width at the tooth root: max. 28 mm Milling cutter diameter: 200 mm Milling cutter diameter according to template: max. 0.21″ (?) Number of teeth range: 8–50 Indexing range: 8–50 mm (?) Machining speed: 49.7 m/min Milling cutter speed: 32.6–49.7 m/min Feed rate: 2–3.1 s/tooth Workpiece spindle Diameter of conical bore at the large end: 99 mm Clamping length: 304.8 mm Taper per foot: 15.4 mm Taper depth: 15.8 mm Iodpfszwmy Njx Am Heig Countersink behind the taper: 57.2 × 77.9 mm Spindle bore diameter: 22.3 mm MACHINE DETAILS Power of main drive motor: 7.46 kW Speed of main drive motor at 60 Hz: 1,800 rpm Speed of main drive motor at 50 Hz: 1,500 rpm Speed of hydraulic motor at 60 Hz: 1,800 rpm Speed of hydraulic motor at 50 Hz: 1,500 rpm Speed of coolant pump at 60 Hz: 3,600 rpm Speed of coolant pump at 50 Hz: 3,000 rpm Speed of chip conveyor motor at 60 Hz: 1,800 rpm Speed of chip conveyor motor at 50 Hz: 1,500 rpm Dimensions & Weight Footprint: 3,200 × 2,210 mm Machine weight: approx. 9,000 kg