Used Solutions Sk Laser Laser Marker for sale (12,774)

Condition: used, Year of construction: 2022, machine/vehicle number: 01, General description The item for sale is an industrial laser marking machine by Solutions SK, model LM9 (designation FD060). The machine is from the 2022 production year and represents a complete solution for precise marking of parts, enclosed in a safe, free-standing housing. Technical data and specifications Manufacturer: Solutions SK Laser Machine model: Laser LM9 / LM9/B3 Designation / ID: FD060 Serial number: 01 Date of manufacture: 07.2022 (Code: 22-07-00) Ledpfxoz R Eiuo Ab Aeru Control interface: Industrial SIEMENS SIMATIC HMI TOUCH touchscreen panel Operating panel: Equipped with hardware buttons for START, RESET, STOP, a switch for working light (SVETLO), and a main emergency stop switch (NÚDZOVÉ ZASTAVENIE).

Condition: used, SLM Solutions Type: SLM 280 HL For sale is a professional metal 3D printing system, type SLM 280 2.0, from SLM Solutions (Lübeck). The SLM is designed for 24/7 operation and was last used with titanium. Installation was in 2018. The system already has the sintering walls for gas flow. The system has only been operated with argon for the last 3 years. Approx. 50,000 laser hours. The 50,000 hours refer to the laser on-time; the exposure time is not recorded in the older 280 models. If I disregard the coating time, I estimate approximately 10,000 active laser hours. Last maintenance was in early 2026. Currently, occasional communication issues between the PC and the PLC are observed. In rare cases, this can lead to incorrect status messages, which can cause the system to be briefly interrupted during a running job. Technical data (excerpt) Single laser 400W Weight: 1,245 kg Build volume: 280 × 280 × 365 mm Laser: 1 × 400 W fiber laser (IPG) Optics: 3D galvo system Focus diameter: 80 – 115 µm Max. scanning speed: up to 10 m/s Layer thickness: 20 – 90 µm Minimum feature size: approx. 150 µm Build speed: up to approx. 113 cm³/h (material-dependent) Lrjdpfjzhlr Esx Ab Aeu Materials: Stainless steel, tool steel, titanium (Ti64), aluminum, Inconel, CoCr Inert gas: Argon Gas consumption process: approx. 2.5 – 8 l/min Gas consumption purging: approx. 70 – 110 l/min Compressed air: approx. 6 – 7 bar Electrical: 400 V, 3P+N+PE Fuse: 63 A Power consumption: approx. 3.5 – 5.5 kW Machine dimensions: approx. 2600 × 1200 × 2700 mm Weight: approx. 1300 kg (empty), up to approx. 1800 kg (including powder) Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of supply: (See image) SLM 280 machine Control cabinet Process chamber Internal control panel with screen (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: like new (used), Year of construction: 2020, operating hours: 2,367 h, functionality: fully functional, machine/vehicle number: 10058088, Markem-Imaje SmartLase C350 CO2 Laser Marking Machine – SL350 Controller + BOFA ES500+ Extractor – 2020 Price: €10,000 excluding VAT Manufacturer: Markem-Imaje Model: SmartLase C350 Year: 2020 Condition: Used Location: Boxtel, Netherlands DESCRIPTION For sale: Complete Markem-Imaje SmartLase C350 industrial CO2 laser marking and coding system, including SL350 touchscreen controller and Markem-Imaje / BOFA ES500+ fume extraction unit. Manufactured in 2020 and used in a professional, automated food production environment. Designed for high-speed, permanent, non-contact marking of production dates, expiry dates, batch numbers, lot codes, serial numbers, and traceability information. The system is suitable for integration into automated packaging and production lines. A live demonstration of the laser marking system in operation can be arranged upon request. A second Markem-Imaje SmartLase C350 system may also be available for purchase. Please inquire about availability and combined pricing. Lsdpfjz R N T Sox Ab Aoru INCLUDED EQUIPMENT 1. Markem-Imaje SmartLase C350 Laser Marker - Model: SmartLase C350 - Part no.: 10058088 - Serial no.: CN20450209 - Industrial CO2 laser marking technology - High-speed, non-contact coding 2. Markem-Imaje SL350 Controller - Part no.: 10058345 - Serial no.: EY20490001 - Manufactured: December 2020 - Touchscreen operator interface - Power: 100–240 VAC, 50/60 Hz - Total print count: 3,948,396 3. Markem-Imaje ES500+ Fume Extractor - Part no.: 10069039 - Serial no.: 50120740003 - Manufactured: November 2020 - Produced by BOFA International - Power: 230 V, 50 Hz, 10 A - Operating hours displayed: 2,367 - Industrial laser fume extraction APPLICATIONS - Food and beverage packaging - Cardboard boxes and cartons - Paper and plastic packaging - Flexible packaging films - Pharmaceutical and cosmetic packaging - Date and expiry coding - Batch, lot, and serial number marking - Automated packaging and conveyor lines Material compatibility depends on the laser configuration and substrate. ADVANTAGES - Permanent, high-contrast marking - No ink, ribbons, or solvents required - High-speed industrial operation - Low consumable requirements - Touchscreen control - Suitable for production line integration - Complete system with fume extraction CONDITION & AVAILABILITY Used industrial equipment, offered as a complete set. The machine can be inspected in Boxtel, Netherlands. A live demonstration in operation can be arranged by appointment. A second SmartLase C350 may also be available. Both systems can potentially be purchased together. Price: €10,000 excluding VAT. International buyers welcome. Collection and transport can be discussed. SEARCH TERMS Markem Imaje C350, SmartLase C350, SmartLase 350, SL350 controller, Markem Imaje laser coder, CO2 laser marking machine, industrial laser printer, laser date coder, laser coding machine, laser batch coding, expiry date printer, packaging laser marker, BOFA ES500+, ES500 Plus fume extractor, used laser marking machine, second-hand laser coder, laser marking equipment, Laserbeschriftungsmaschine, CO2 Laserbeschriftungsgerät, Lasermarkierer, Lasercodierer, Laserkennzeichnung, Markem Imaje Laserdrucker, gebrauchte Lasermarkiermaschine.

Condition: used, functionality: fully functional, machine/vehicle number: 2919007, Year of construction: 2019, operating hours: 3,300 h, total length: 2,600 mm, total height: 2,700 mm, total width: 1,200 mm, type of input current: three-phase, overall weight: 1,800 kg, input voltage: 400 V, input frequency: 50 Hz, laser power: 400 W, Equipment: compressor, LM SOLUTIONS SLM 280 – 2019 – 800 HOURS – €60,000 Industrial 3D metal printer for sale – Proxicad Srl, Italy Proxicad Srl is offering for sale an SLM Solutions SLM 280, an industrial machine for the additive manufacturing of metal components, year 2019. The machine is used and is stated to be in perfect working order, with 800 operating hours recorded. The SLM 280 is intended for industrial applications requiring the production of metal components using laser powder bed fusion (LPBF) technology. Key features: Brand: SLM Solutions Model: SLM 280 Year of construction: 2019 Operating hours: 3300 Condition: used, in perfect working order according to the seller Location: Abruzzo, Italy Ljdpfj Ad Nypox Ab Asru Asking price: €50,000, negotiable

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 1746, shaft length: 10,564 mm, laser power: 100 W, type of cooling: air, working range: 1,750 mm, overall weight: 205 kg, table height: 1,760 mm, table length: 12,000 mm, table width: 9,200 mm, Equipment: cabin, Used fiber laser system for laser marking, engraving, marking, and microstructuring on metals and plastics. Ex-display machine, laser class 1, CE-compliant, Made in Germany. Laser & Beam Source - IPG Ytterbium fiber laser - Power: 100 W - Wavelength: 10564 nm - Pulse energy: 0.2–1.0 mJ - Cooling: Air-cooled, no external cooling required - Power supply: 230 V / 50 Hz - Scanner: X-Y galvanometer with mirror mount for 1064 nm Note: Manufacturer’s lab values; actual values may vary depending on the application. Scanner & Control - F-Theta lens: f = 254 mm, anti-reflection protective glass - Marking field: 175 × 175 mm - Max. scan speed: 4 m/s Ledeyfvhgspfx Ab Aeru Industrial PC with Windows 11 Pro, SSD storage - Controller cards for laser & scanner - Digital & analog interfaces: RS232, Ethernet, USB - Custom adaptations optional - 19" TFT color monitor, keyboard & mouse - SK CONTROL software - Industrial software for texts, logos, QR codes, variable data - Intuitive user interface, logo/photo import via mouse click - Job management and parameter library for reproducible quality - Pilot laser displays laser position as red rectangle Workstation 1 – SK LASER - Enclosed laser class 1 workstation - Combined sitting/standing workstation - Aluminum profile housing, front door with laser safety glass, bright work lighting - Dimensions: H 1760 × W 920 × D 1200 mm - Stainless steel worktop with 25-mm hole grid, 710 × 400 mm - Motorized Z-axis, travel 500 mm (gross) - Rear door for oversized workpieces (when open: laser class 4) - Extraction nozzle DN50 for fume extraction - Redundant safety equipment: emergency stop, interlock, safety relay performance level 4 - Operating temperature: 15–35°C - Connection load: 230 V / 50 Hz Condition & Delivery - Ex-display, tested machine - Optionally: Delivery including commissioning within Germany

Year of construction: 2025, operating hours: 80 h, condition: used, functionality: fully functional, laser power: 200 W, machine/vehicle number: ELXX-25100004, For sale is a professional, pulsed laser cleaning machine (pulse laser) of the type GL-PM-200 from the manufacturer EraserLaser GmbH. The unit dates back to the 2025 model year, has very few operating hours, and is in excellent, fully functional condition. In contrast to continuous CW lasers, this pulsed system is ideally suited for extremely precise and material-friendly cleaning. It is the ideal solution for demanding tasks where the base material (e.g., sensitive molds, historical components, weld seam preparation, or precision tools) must not be subjected to any thermal influence or material removal. Rust, paint, oils, and oxide layers are removed precisely and without leaving any residue. Product benefits & highlights: Maximum precision without heat input: Thanks to the fine adjustment of pulse width (20–500 ns) and frequency, the cleaning can be precisely tailored to sensitive surfaces. Compact & flexible: The laser is housed in a robust enclosure and can be ideally used in mobile applications. Extensive parameter control: Parameters such as laser power, scan speed, frequency, and track density (Spiral Series) can be precisely controlled via the intuitive 7-inch touch display. Quick access to memory locations: Up to 5 user-defined work modes can be saved to allow quick switching between different cleaning requirements in everyday work. Easy maintenance & care: Low maintenance thanks to reliable air cooling. Integrated preview laser for precise alignment of the cleaning area on the workpiece. Technical data at a glance: Model: GL-P-M-200 Laser type: Pulsed fiber laser (pulse laser), Laser Class 4 Wavelength: 1064 nm Laser power: 200 watts (continuously adjustable from 10% to 100%) Laser frequency: 5 kHz – 4000 kHz Pulse width: 20 ns – 500 ns Cleaning area (length x width): Variable, adjustable up to 100 mm x 20 mm Fiber length (hose assembly): 4 to 10 meters Cooling: Air-cooled Power connection: 220V AC (Schuko plug, fuse rating min. 16A) Lrsdpfeziww Aox Ab Aou Condition & scope of delivery: Condition: Very well-maintained, used condition, hardly used, visually and technically flawless. The protective lens and optics are clean and fully functional. Scope of delivery: Laser cleaning system GL-P-M-200 including hose assembly and cleaning gun. Important safety note: Operating a system of Laser Class 4 requires the mandatory use of approved laser safety goggles (DIN EN 207 for the wavelength range of 1064 nm) as well as compliance with applicable occupational safety regulations (including respiratory protection/extraction).

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, shaft length: 10,600 mm, laser power: 60 W, type of cooling: air, total width: 800 mm, total height: 1,800 mm, total length: 1,700 mm, working range: 1,200 mm, warranty duration: 6 months, height adjustment type: electric, table height: 7,000 mm, table length: 4,000 mm, Equipment: cabin, Used CO₂ laser system for marking, engraving, and cutting plastics, wood, acrylic, paper, and more. Refurbished, 6-month warranty, Made in Germany. Technical Specifications - Laser source: CO₂ laser, beam source refurbished in 2023 - Peak power: 60 W - Wavelength: 9,600 nm - Cooling: air cooling - Power supply: 230 V / 50 Hz - Scanner & optics - X-Y galvo scanner with mirror mount - F-theta lens: F = 200 mm, anti-reflective protective glass - Working area: 120 × 120 mm (other lenses available on request) Machine & Work Area - Fully enclosed workstation Lrodjyfucvopfx Ab Aou - Dimensions (W/H/D): 910 × 255 × 200 mm - Extraction port available (extraction system not included) Control & Software - Industrial PC Marking software: - Texts, logos, variable data - Import of DXF, PLT, WMF, bitmap - Intuitive, user-friendly interface Scope of Delivery & Safety - Complete machine, workstation - 6-month warranty - CE certified, TÜV-tested Condition & Delivery - Refurbished, technically tested Offer valid ex works plus shipping, while stocks last

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, machine/vehicle number: F20iMW1 Faserlaser, workpiece weight (max.): 50 kg, laser power: 20 W, type of cooling: air, total width: 920 mm, total height: 1,760 mm, total length: 940 mm, overall weight: 250 kg, warranty duration: 6 months, height adjustment type: electric, scan area width: 175 mm, table length: 710 mm, table width: 400 mm, laser wavelength: 1,064 nm, Equipment: cabin, Used fiber laser system for professional engraving, marking, and labeling of metals and plastics. Industrial quality, laser class 1, CE-compliant, Made in Germany. Technical Data - Laser source: IPG Ytterbium fiber laser (MOPA) - Power: 20 W - Wavelength: 1064 nm - Pulse frequency: 20–200 kHz - Beam quality: M² < 1.6 - Power supply: 230 V / 50 Hz Scanner & Optics - X-Y galvo scanner for 1064 nm - F-Theta lens f = 254 mm - Marking field: approx. 175 × 175 mm - Pilot laser (red) + 2 focus distance lasers for focus setting Machine & Work Area - Enclosed laser class 1 workstation - Combined sit/stand workstation - Motorized Z-axis (400 mm total travel) - Stainless steel worktable with 25-mm perforated grid - Extraction port DN50 (extraction unit not included) Control & Software - Industrial PC - SK CONTROL marking software (texts, logos, QR codes, variable data) - Ethernet, USB, RS232, Start/Stop for extraction - 23" monitor, keyboard & mouse Lrodpfxsyctfde Ab Aou Scope of Delivery & Safety - Complete machine with aluminum housing - Emergency stop, main switch, status indicators - Circuit diagrams & operating manual - CE, TÜV-tested - Laser class 1

Condition: used, TRUMPF Lrjdpsz Eh Eysfx Ab Aju Mobile Laser Marking System / Mobile Laser Marker TRUMPF TruMark 5010 Mobile Marker Mobile fiber laser marking system with a hand-held processing unit For sale is a used mobile laser marking system from the manufacturer TRUMPF. The system is suitable for the permanent marking of metallic components, for texts, barcodes, Data-Matrix codes, graphics, and logos, as well as for industrial applications in production and quality assurance. Technical data: Manufacturer: TRUMPF Laser Marking Systems AG Type: TruMark 5010 Mobile Marker Device type: Mobile laser marking system / Fiber laser Year of construction: 2014 Laser medium: Yb:Fiber Wavelength: 1062 ± 3 nm Pulse repetition frequency: 1–200 kHz Pulse duration: 250 ns Max. Marking area size: 50 × 30 mm² Min. Focal diameter: 70 µm Beam quality M²: < 1.6 Electrical connection: 100–230 V / 50–60 Hz Power consumption: 2.5 / 5 A Power rating according to nameplate: 600 W Typical power consumption at rated power: 210 W Protection class: IP40 Dimensions: 460 × 1200 × 980 mm (W × H × D) Weight: 90 kg Processing unit: Dimensions: 190 × 320 × 490 mm (W × H × D) Weight: 5 kg Length of connecting hose: 1.7 m Laser safety class: 1 for metallic workpieces Extraction: integrated Equipment: Hand-held laser processing unit Mobile chassis Integrated touch display Integrated extraction Yb:Fiber laser TruTops Mark operating/marking software Connecting hose Original TRUMPF product documentation Accessories as shown in the pictures Application areas: Laser marking of metallic components Component marking Traceability Static and variable texts Barcodes Data-Matrix codes Graphics and logos Prototype construction Sheet metal fabrication Automotive industry Aerospace industry Scope of delivery: 1 × TRUMPF TruMark 5010 Mobile Marker Hand-held processing unit Touch display Integrated extraction TRUMPF product documentation Accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures Nameplate present The table shown in the photos or any other items not explicitly mentioned are not included in the sale. Shipping or freight shipping is possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, FOBA DP 15 Laser Marking System The FOBA DP 15 laser marking system uses a fiber laser with a wavelength of 1064 nm and a lens focus of f=254 mm (254 mm focal length). This combination enables the permanent and sharp marking of materials such as metals and plastics with the "all-round laser." The 1064 nm wavelength is well absorbed by many materials, which can be used for annealing marking, color change, or material removal. Application: The fiber laser is a versatile "all-round laser" for marking industrial products. It is ideally suited for metals and a wide range of plastics. The technology enables permanent, easily readable, and precise marking. Functionality: The laser beam creates a focused light spot that penetrates the material. Lredpow U T Ebsfx Ab Aou Depending on the material and settings, various effects can be achieved, including: Annealing marking: A color change of the material through heating. Color change: Creation of a color contrast on the material. Material removal: Removal of material to create a recess. Details: Device: FOBA DP 15 Laser Marking System Laser type: Fiber laser Wavelength: 1064 nm Focal length (f): 254 mm (equivalent to 10 inches) You can find more new and used items in our shop! International shipping costs available upon request!

Condition: good (used), functionality: fully functional, Year of construction: 2015, control type: CNC control, degree of automation: automatic, laser source manufacturer: IPG, laser source model: YLS-6000, laser power: 6,000 W, laser wavelength: 1,070 nm, positioning speed: 350 m/min, Equipment: CE marking, centralized greasing system, cooling unit, emergency stop, safety light barrier, TECHNICAL DETAILS General Information Manufacturer: EAGLE Model: iNspire 1530 F6.0 Machine Type: Laser Cutting System Weight: 18,000 kg Laser Source Laser Source: IPG Fiber Laser Laser Power: 6 kW Working Area and Travel Ranges Working Area: 3,000 × 1,500 mm X-Axis: 3,060 mm Y-Axis: 1,540 mm Z-Axis: 120 mm Dynamics and Positioning Maximum Cutting Speed X/Y/Z-Axis: 150 m/min Cutting Speed with Simultaneous Axis Movement: 280 m/min Positioning Speed: 280 m/min Acceleration: 60 m/s² Acceleration: 6 g Minimum Programmable Stroke: 0.001 mm/m Repeatability: 0.03 mm/m Cutting Accuracy: 0.05 mm/m Cutting Capacities Black Steel: 25 mm Stainless Steel: 25 mm Aluminum: 20 mm Ledpfx Abez R D Dqj Aoru Brass: 12 mm Copper: 10 mm Pallet Load Maximum Sheet Metal Weight: 1,000 kg Gas Supply Air Pressure: 6 bar Nitrogen Pressure N₂: 25 bar Oxygen Pressure O₂: 10 bar Operating Times Beam Emission Time: approx. 4,400 h Laser Activation Time: 19,855 h Electrical Data Main Power Supply: 400 V / 50 Hz Power Consumption: 54 kVA Control Voltage: 24 V Machine Dimensions Length: 1,000 mm Width: 3,080 mm Height: 3,060 mm Cutting Head Overhaul: 9 months ago at the manufacturer EQUIPMENT IPG Fiber Laser Source Linear Motors in All Axes Carbon Crossbeam Composite Body Pallet Changer Various Nozzles Protective Lenses Additional Accessories

Condition: new, Year of construction: 2025, If you are looking for the right machine and not a toy, then you have come to the right place: Foil label - label printer - name plate machine Laser markers skyLASER Mark 500 - 2D fiber laser engraving / marking laser is the complete solution for your complex laser engraving applications (* Prices depending on the equipment, this is a brand new laser machine from our production) Our skyLaser Mark systems are used exactly where the conventional CO2 laser technology has its limits. Using the fiber laser with a wavelength of 1064nm, even the most filigree structures can be realized in almost any material. In contrast to conventional milling processes, the laser works without contact, without force and without tool wear. The advantages in your application are the geometric flexibility and high machining accuracy. This type of machining can be used regardless of the hardness of the workpiece to be machined. The flexibility of the system increases with the mobile work table, which can be adapted to your needs. You can easily integrate the system into your production line, or operate it as a stand-alone solution. Our skyLaser Marks deliver very precise and permanent markings (laser engravings) and are suitable for the special area of ​​laser metal and certain organic substances. The use of a variety of fonts, the application of barcodes, serial numbers, logos and pictures is easily possible. Thanks to the excellent resolution, almost all requirements for marking tasks can be solved. Production of embossing stamps, engravings, inscriptions and complex, fine structures, the software is extremely user-friendly. Even very complex and complex marking tasks can be easily created on the supplied industrial PC. Precise positioning is done in no time at all, thanks to the optional observation camera for process tracking and software-based workpiece alignment. Since the system has hardly any wearing parts and is almost maintenance-free thanks to the IPG laser technology, it can be used especially for industrial applications as well as in continuous use. The skylaser marking laser / engraving laser at a glance: Processing area: from 110 x 110 or 120x120 or 300x300 mm (F-theta lenses dependent / 3D option) Laser source: IPG (pulsed fiber laser, YTTERBIUM PULSED FIBER LASER) SCANLAB galvanometer scanner Lodpfx Ascuiz Tsb Aeru Nominal laser power: 20W New: software-controlled, variably adjustable working width (X, axis max. 450mm depending on structure) New: software-controlled, variably adjustable working height (Z, axis max. 200/450 mm depending on the body) Optional other work areas - automatic material feed, etc. Air cooling due to low energy consumption Labeling speed: up to 8000 mm / s (SCANLAB dyn AXIS ® galvanometer scanners the SCAN cube ® 10 achieve labeling speeds of up to 640 characters per second.) Redundant security system Laser class: 1 or, depending on the configuration, laser class: 2 (through optional pilot laser) pfeifer-technology HQ mirrors and optics for perfect results, powerd by Scanlab (R) pfeifer-technology industrial PC including pre-installed control software New: incl. Laser Focus Finder New: incl. Process air control New: including suction control Optional: positioning laser: integrated diode laser for optimal positioning New including F-Theta lens 110 x 110 mm working area with protective glass! (Extension of the work area optionally to (180, 350 mm) almost maintenance-free

Condition: used, Year of construction: 2011, machine/vehicle number: E1053A0497, overall weight: 850 kg, For sale is a TRUMPF TruDisk 4002 (4C) disc laser / laser source, including a separate KLH cooling unit RW 20/0 SK. Laser technical data: * Manufacturer: TRUMPF Laser GmbH + Co. KG * Type: TruDisk 4002 (4C) * Year of manufacture: 01/2011 * Laser power: 4,000 W * Equipment No.: E1053A0497 * Supply voltage: 380 V (-10%) to 460 V (+10%), 3 AC + PE * Frequency: 50–60 Hz * Connection power: 23 kW / 25 kVA * Rated current: 34 A at 400 V * Protection class: IP54 * Weight: approx. 850 kg Cooling unit: * Manufacturer: KLH Kältetechnik GmbH * Type: RW 20/0 SK * Year of manufacture: 2017 * Part No.: E123223000AA * Serial number: 17KLH00670 * Voltage: 400/460 V * Frequency: 50/60 Hz * Refrigerant: R134a * Refrigerant quantity: 3.7 kg Lodpjzvqfyefx Ab Asru The TruDisk 4002 is offered together with the KLH cooling unit shown in the picture. Inspection is possible by arrangement. Further technical information and images can be provided upon request.

Condition: like new (used), Year of construction: 2022, OEM – laser marker / engraving laser (diode pumped YAG-laser) The laser beam source was used for some time to generate plasma as part of a scientific project. Overall, however, it only has few operation time. Due to the short pulse length, this laser is also very suitable as an engraving laser Lrjdpfjpyg N Aox Ab Aju Laser source of the complete system is a 10 Watt diode-pumped YAG-laser with 1064 nm wavelength. The working area is 100 x 100 mm, up to 300 x 300 mm is available as an option. No external cooling is necessary. Input-voltage: 110...240 VAC / 50 Hz. Applications are laser engraving and material ablation. The control software is installed on a PC, optionally also a Laptop can be used. The language of the software can be choosen (German, English). The laser is prepared for an integration into a ‘higher level system’, but can also be used as a 'stand alone' system. In this case interfaces for Interlock, emergency stop, laser control etc. are available. We are happy to support the customer according to his requirements.

Condition: new, Year of construction: 2025, If you are looking for the right machine and not a toy, then you have come to the right place: Foil label - label printer - name plate machine Laser markers skyLASER Mark 500 - 2D fiber laser engraving / marking laser is the complete solution for your complex laser engraving applications (* Prices depending on the equipment, this is a brand new laser machine from our production) Our skyLaser Mark systems are used exactly where the conventional CO2 laser technology has its limits. Using the fiber laser with a wavelength of 1064nm, even the most filigree structures can be realized in almost any material. In contrast to conventional milling processes, the laser works without contact, without force and without tool wear. The advantages in your application are the geometric flexibility and high machining accuracy. This type of machining can be used regardless of the hardness of the workpiece to be machined. The flexibility of the system increases with the mobile work table, which can be adapted to your needs. You can easily integrate the system into your production line, or operate it as a stand-alone solution. Our skyLaser Marks deliver very precise and permanent markings (laser engravings) and are suitable for the special area of ​​laser metal and certain organic substances. The use of a variety of fonts, the application of barcodes, serial numbers, logos and pictures is easily possible. Thanks to the excellent resolution, almost all requirements for marking tasks can be solved. Production of embossing stamps, engravings, inscriptions and complex, fine structures, the software is extremely user-friendly. Even very complex and complex marking tasks can be easily created on the supplied industrial PC. Precise positioning is done in no time at all, thanks to the optional observation camera for process tracking and software-based workpiece alignment. Since the system has hardly any wearing parts and is almost maintenance-free thanks to the IPG laser technology, it can be used especially for industrial applications as well as in continuous use. The skylaser marking laser / engraving laser at a glance: Processing area: from 110 x 110 or 120x120 or 300x300 mm (F-theta lenses dependent / 3D option) Laser source: IPG (pulsed fiber laser, YTTERBIUM PULSED FIBER LASER) SCANLAB galvanometer scanner Nominal laser power: 20W Lrodocuiz Sepfx Ab Aju New: software-controlled, variably adjustable working width (X, axis max. 450mm depending on structure) New: software-controlled, variably adjustable working height (Z, axis max. 200/450 mm depending on the body) Optional other work areas - automatic material feed, etc. Air cooling due to low energy consumption Labeling speed: up to 8000 mm / s (SCANLAB dyn AXIS ® galvanometer scanners the SCAN cube ® 10 achieve labeling speeds of up to 640 characters per second.) Redundant security system Laser class: 1 or, depending on the configuration, laser class: 2 (through optional pilot laser) pfeifer-technology HQ mirrors and optics for perfect results, powerd by Scanlab (R) pfeifer-technology industrial PC including pre-installed control software New: incl. Laser Focus Finder New: incl. Process air control New: including suction control

Condition: ready for operation (used), Year of construction: 2019, operating hours: 200 h, functionality: fully functional, type of input current: AC, laser power: 700 W, power: 3 kW (4.08 HP), Equipment: cooling unit, cw fiber laser with 750 watts as a stand-alone system or for integration into machines and systems. Due to its high output power, this water-cooled laser is particularly suitable for tasks where a lot of heat is required in the workpiece. This includes, for example, welding metals or plastics, cutting, material removal or structuring. The optional use of a 2D galvo scanner means that the laser beam can also be guided over the workpiece using software. The laser can be modulated digitally and analogue (power setting) and can also be controlled and monitored using control software. The images show a setup with a galvo scanner. The system can also be optionally equipped with a welding head or cutting head. Laser class 1 can also be achieved by installing side walls and a front door with a laser protection window (all available). The work area can be adjusted in height using an electrically controlled Z axis. The laser system is prepared for integration into a higher-level system, but can also be used as a stand-alone system. In the event of integration, interfaces for interlock, emergency stop, external laser control, etc. are available. Individual components of the system can also be integrated into a system at the customer's site. We are happy to support the customer after consultation and according to their specifications. Lredeph U Anopfx Ab Aou Some technical data: - maximum 700 watts optical output power - wavelength: 1080 [nm] - power consumption (without cooler): < 3,000 watts - supply: single-phase; 230 VAC / 50 Hz - analog modulation (can be used to adjust power, among other things) - digital modulation up to 20 kHz

Condition: new, Year of construction: 2024, dimension of workpiece 200 x 200 x 200 mm Ledpfx Abjwgn D Ds Aoru travel -x axis 110 mm travel -y axis 110 mm

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,070 mm, input voltage: 230 V, type of input current: AC, laser power: 20 W, type of cooling: air, total width: 920 mm, total height: 940 mm, total length: 1,760 mm, door opening width: 670 mm, door opening height: 500 mm, scan area length: 175 mm, scan area width: 175 mm, travel distance Z-axis: 400 mm, table height: 710 mm, table length: 710 mm, table width: 400 mm, space requirement width: 920 mm, space requirement height: 940 mm, laser wavelength: 1,070 nm, space requirement length: 1,760 mm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, extraction nozzle diameter: 50 mm, working width: 175 mm, Equipment: cabin, Fiber Laser System for Professional Marking and Engraving of Metals and Plastics. Equipped with SK-LASER Workstation, Laser Class 1, and automatic lifting door. Laser Class 1 · CE · Made in Germany System & Lifting Door: - Complete system: IPG fiber laser + workstation + electric lifting door Process Sequence: - Start → Door closes → Laser process → Door opens automatically - Door opening approx. H 500 × W 670 mm - Access protection via safety control Laser – IPG (Made in Germany): - Power: 20 W - Pulse energy: 1.0 mJ - Pulse duration: 100 ns - Frequency: 20–80 kHz - Wavelength: 1060–1070 nm - Beam quality M² < 1.2 - Air-cooled, < 400 W Optics & Scanner: - F-Theta lens f = 254 mm - Marking field 175 × 175 mm - Pilot laser + 2 distance lasers - Manually adjustable laser head (Y-axis) Control: - Windows 11 Pro, SSD, 23" monitor - Interfaces: Ethernet / USB / RS232 - SK CONTROL: texts, logos, QR codes, variable data, parameter management Workstation 1 – Laser Class 1: - Seated/standing workstation, aluminum housing - Work surface 710 × 400 mm, 25 mm hole grid Ledjyimpaepfx Ab Ajru - Dimensions 1760 × 920 × 940 mm Motorized Z-Axis (400 mm) - Extraction port DN50 - Safety (PL4) - Emergency stop - 2-channel interlock Safety relay - Rear service door (when open: Laser Class 4) Operation: 230 V / 50 Hz 15–35 °C Condition: - New machine - CE · Made in Germany

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,070 mm, workpiece weight (max.): 350 kg, input voltage: 230 V, type of input current: AC, laser power: 20 W, type of cooling: air, total width: 1,200 mm, total height: 1,800 mm, total length: 940 mm, working range: 175 mm, height adjustment type: electric, door opening width: 1,100 mm, door opening height: 700 mm, scan area length: 175 mm, scan area width: 175 mm, travel distance Z-axis: 400 mm, table length: 710 mm, table width: 400 mm, laser wavelength: 1,070 nm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, extraction nozzle diameter: 50 mm, working width: 175 mm, Equipment: cabin, Laser Protection Class 1 · Made in Germany · NEW 12-month warranty System & Workstation: - Combined sit/stand workstation, aluminum housing - Fully glazed right-front door, safety glass LK 1 - Bright work light, suction nozzle DN50 - Standard size: H 1760 × W 920 × D 940 mm - Workstation XXL W 1200 × H 1800 × D 940 mm, sliding roof for crane loading, max. 350 kg - Manual sliding door, opening approx. 1100 × 700 mm - Safety equipment: emergency stop, two-channel interlock, Performance Level 4 - Motorized Z-axis, travel range 400 mm, focus dependent on lens Laser: - IPG Ytterbium fiber laser - Output power 20 W, pulse energy 1.0 mJ - Wavelength 1060–1070 nm, pulse duration 100 ns - Pulse frequency 20–80 kHz, air-cooled, power consumption < 400 W - Beam quality M² < 1.2 - Pilot laser + 2 distance lasers, Y-direction manually adjustable Scanner & Control: - F-Theta lens F = 254 mm, marking field 175 × 175 mm - Windows 11 Pro, SSD, 23" monitor, keyboard & mouse - Interfaces: RS232, Ethernet, USB Lredsyipxaspfx Ab Aeu - SK CONTROL software for texts, logos, QR/datamatrix codes, barcodes Work Area & Safety: - Magnetic positioning on stainless steel platform 710 × 400 mm, hole grid 25 mm - Operating conditions: 230 V / 50 Hz, 15–35 °C

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,064 mm, workpiece weight (max.): 50 kg, input voltage: 115 V, type of input current: AC, laser power: 100 W, type of cooling: air, total width: 450 mm, total height: 853 mm, total length: 806 mm, working range: 150 mm, overall weight: 92 kg, warranty duration: 24 months, height adjustment type: electric, space requirement height: 1,080 mm, laser wavelength: 1,064 nm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, Equipment: cabin, The SpeedMarker 330 is the compact desktop laser from the SpeedMarker series, designed for users who want to laser mark small to medium-sized batches efficiently, reproducibly, and close to production. Unlike many standard workstations, the SpeedMarker 330 relies on clearly defined software workflows instead of complex machine configurations. As an industrial laser marking system, it combines galvo high-speed technology, a 100 W MOPA fiber laser (1064 nm), and the Ruby® laser software into a powerful production system that can be easily integrated into your workflow. The SpeedMarker 330 stands for standardized, controllable marking processes – without the complexity of customized systems. Ledpfx Aozcc Uzeb Aeru Key features: The SpeedMarker 330 Black Line combines advanced fiber laser technology with high marking speed, making it the ideal solution for industrial marking, traceability, and product customization. Its powerful 100 W laser source enables fast and precise marking on metals, plastics, and coated materials, thus maximizing productivity in demanding production environments. The intelligent autofocus technology automatically compensates for different component heights, reducing setup times while ensuring consistently high marking quality across various applications and batch sizes. The powerful galvo system offers exceptional speed and accuracy, producing sharp text, detailed graphics, barcodes, QR codes, and serial numbers with excellent repeatability and high contrast. The intuitive software for marking, with support for common industry-standard file formats and variable data, enables quick job setup, while real-time visualization and simulation help optimize workflows and avoid errors before production begins. Thanks to its compact, ergonomic design, the SpeedMarker 330 Black Line can be used as a standalone workstation or seamlessly integrated into automated production lines, offering flexibility, reliability, and efficiency for industrial marking applications.

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,070 mm, workpiece weight (max.): 25 kg, input voltage: 230 V, type of input current: AC, laser power: 50 W, type of cooling: air, total width: 1,400 mm, total height: 2,000 mm, total length: 1,500 mm, working range: 280 mm, height adjustment type: electric, scan area length: 280 mm, scan area width: 280 mm, travel distance X-axis: 600 mm, travel distance Z-axis: 400 mm, table length: 1,000 mm, table width: 1,000 mm, space requirement width: 1,400 mm, space requirement height: 2,000 mm, laser wavelength: 1,070 nm, space requirement length: 1,500 mm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, extraction nozzle diameter: 50 mm, working width: 280 mm, Equipment: cabin, Automated Fiber Laser System with SK-LASER Workstation and Rotary Table for Series Production. Laser Class 1 · CE · Made in Germany System: - Complete system: fiber laser + workstation + rotary table - 2 processing positions with partition wall (400 mm) - Operator protection via light curtain - 2-cycle operation, 180° rotation Lodpfx Abeyil Dvo Aoru Equipment: - Workstation XXL: W 1,400 × H 2,000 × D 1,500 mm - Option: High-speed scan head Superscan Rotary Table & Axes: - Rotary table Ø 1,000 mm, 25 mm hole grid - Automatic production cycle - 2 × Z-axis 400 mm, 1 × X-axis 600 mm - Ball screw drive, load capacity up to 25 kg Laser – IPG: - 50 W, 1.0 mJ - 50–250 kHz, 100 ns - 1060–1070 nm, M² < 1.2 - Air-cooled, < 400 W Optics: - F-Theta f = 420 mm - Field approx. 280 × 280 mm - Pilot laser + distance laser Control System: - Windows 11 Pro, SSD, 23" monitor - Ethernet / USB / RS232 - SK CONTROL: texts, logos, QR/DM, serial numbers, material parameters Workstation: - Seated/standing workstation - Extraction nozzle DN50 - Emergency stop, dual-channel interlock, safety relay Operation: - 230 V / 50 Hz - 15–35 °C Condition: - New machine - CE-compliant · Made in Germany

Year of construction: 2026, condition: new, Wavelengths, scan head aperture, marking head position, IP rating, power and much more can be configured to suit your application needs. Flexibility is built-in. With print speeds up to 2,000 characters/sec. and line speeds up to 900 m/min., these marking lasers address both simple and complex code requirements on a range of substrates including paperboard, glass, painted metals and many plastic materials. This flexibility makes the C-Series lasers well suited for laser marking applications in various industries: for automotive parts, electronic components, plastic parts, cables, and many more. Marking your products on-the-fly or when stationary, with simple date codes or complex graphics, the C.0102 and C.0302 offer cost effective solutions to your part marking challenges. Lredjw Npv Eepfx Ab Aou

Year of construction: 2026, condition: new, Wavelengths, scan head aperture, marking head position, IP rating, power and much more can be configured to suit your application needs. Flexibility is built-in. With print speeds up to 2,000 characters/sec. and line speeds up to 900 m/min., these marking lasers address both simple and complex code requirements on a range of substrates including paperboard, glass, painted metals and many plastic materials. This flexibility makes the C-Series lasers well suited for laser marking applications in various industries: for automotive parts, electronic components, plastic parts, cables, and many more. Marking your products on-the-fly or when stationary, with simple date codes or complex graphics, the C.0102 and C.0302 offer cost effective solutions to your part marking challenges. Lsdpfxofir Srs Ab Asru

Year of construction: 2016, condition: used, Ask for additional information! Ledpfsxy Sphox Ab Asru

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Trotec SpeedMarker 156Wx Industrial Laser Marking System Brand: Trotec Model: SpeedMarker 156Wx Type: Industrial Laser Marking System Application: Permanent marking, engraving and identification of industrial components Available for sale is a Trotec SpeedMarker 156Wx, a professional industrial laser marking system from Trotec Laser. Ljdpfoz Hzvhjx Ab Asru The SpeedMarker series is designed for high-quality, permanent marking and identification of a wide range of industrial components and products. It is suitable for applications including product identification, serial numbers, barcodes, QR codes, logos, text, part numbers and traceability markings. The SpeedMarker 156Wx is particularly suited to industrial and manufacturing environments where accurate, repeatable and permanent marking is required. Typical Applications: - Industrial component marking - Serial number and part number marking - Barcode and QR code marking - Logo and branding - Product identification - Traceability marking - Metal component marking - Engineering and manufacturing applications - Tool and equipment identification - Permanent asset marking Device was removed from IMA manufacturing line that was never commissioned. Marking system is in "as new" condition. Sold as seen in images.