Used Solo Belt Oven for sale (10,401)

Condition: used, TECHNICAL DETAILS - Belt width : 100 [mm] Ledpfsu E U Tbsx Albeah - Max. loading height : 50 [mm] - Max. temperature : 1150 [°C] - Adjustable belt speed : 5 - 100 [cm/min] - Max. belt load : 3 [kg/m] à 800 [°C] / 1.2 [kg/m] à 1100 [°C] - Heating length : 1000 [mm] - Cooling length : 1800 [mm] - Shielding gas : Nitrogen / Dihydrogen - Shielding gas flow : 2 [Nm3/h] - Purge gas : Azote - Purge flow rate : 1.8 [Nm3/h] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 11.5 [kW]

Condition: used, TECHNICAL DETAILS - Belt width : 80 [mm] - Max. loading height : 50 [mm] - Max. temperature : 1150 [°C] - Adjustable belt speed : 5 - 100 [cm/min] - Max. belt load : 3 [kg/m] à 800 [°C] / 1.2 [kg/m] à 1100 [°C] - Heating length : 1000 [mm] - Cooling length : 1800 [mm] - Shielding gas : Nitrogen / Dihydrogen - Shielding gas flow : 2 [Nm3/h] - Purge gas : Azote - Purge flow rate : 1.8 [Nm3/h] POWER SUPPLY Lajdew H Dvpjpfx Albsh - Supply voltage : 400 [V] - Total installed power : 11.5 [kW]

Condition: used, Year of construction: 1996, machine/vehicle number: VKD5000G, power: 180 kW (244.73 HP), temperature: 1,120 °C, inner dimension length: 5,000 mm, inner dimension width: 550 mm, inner dimension height: 130 mm, number of chambers: 3, year of last overhaul: 2025, We offer a used WMU VKD5000G protective gas conveyor furnace (continuous belt furnace), year of manufacture 1996. The system is ideally suited for soldering and annealing stainless steel components. Lsdpfoy Nyqzox Albeah Technical data: Heated length: 5000 mm Number of heating zones: 3 Operating temperature: up to 1120 °C Usable width: 550 mm Usable height: 130 mm Heating power: 180 kW Protective gas: Hydrogen / Nitrogen The furnace was relined in 2025 and is equipped with an almost as-new furnace muffle. If you have any questions or require further information, please do not hesitate to contact us by phone or email at any time.

Condition: new, conveyor belt length: 22,000 mm, conveyor belt width: 3,750 mm, overall weight: 800 kg, The flat spiral belt with S-hook is a woven belts consisting of left and right spirals which are twined together by means of straight cross rods. The spirals are attached under post-tension, whereby a very dense belt surface is created. The cross rods at the end are bended in the direction of the previous cross rod. The cross rod is then bended around the previous cross rod. Weight 800kg Lajdpfx Aljtp S E Eobsh Width 3.75m Diameter of chains 1.2mm The flat spiral belts with S-sides are practically familiar with a restricted amount of applications. This however doesn’t mean that the belt type can’t be used for other applications: – Oven belts in bread & pastry in industry – A special version of the above mentioned is with duplex chains at the sides – Belts in tunnels serving high temperature treatment processes such as tempering, harden, sintering, hard soldering, etc.

Year of construction: 2012, operating hours: 5,000 h, condition: used, functionality: fully functional, The Italforni TSC Tunnel Electric Stone Deck Conveyor Oven (31") is a premium, high-output commercial pizza oven that bridges the gap between traditional stone baking and automated conveyor convenience. It features a unique refractory ceramic stone conveyor belt that allows operators to cook genuine Italian-style stone-baked pizzas, flatbreads, and focaccia directly on the stone surface at high volumes. Key Specifications: According to technical data from Italforni and official suppliers like Lasdpfx Asz Ad S Holbjh External Dimensions: 1100 mm (H) x 2520 mm (L) x 1200 mm (W) Internal Chamber Dimensions: 2500mm (L) x 870mm (W) x 110mm (H) Belt Width: 31 inches / 790 mm Weight: 420 kg Power Requirements: 34 kW, 415 V three-phase (requires a 63-amp feed) Hourly Production Output The 31-inch variable speed belt handles large quantities efficiently, achieving a standard bake time of roughly 3 minutes per pizza: Core Features: Static Heating Elements: Uses individually controlled top and bottom static Incoloy heating elements. This design provides up to 30% more cooking capacity compared to standard convection models. Precise Digital Controls: Features touchscreen menu programming with an accuracy of +/-1°C. Maximum cooking temperatures reach up to 450°C to 500°C. Energy Efficiency: Includes a built-in standby mode that lowers energy consumption by up to 50% during off-peak hours. Simplified Maintenance: Built with premium stainless steel, a self-diagnostic service function, and removable crumb-collecting trays for easy cleanup.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, conveyor belt length: 4,450 mm, conveyor belt width: 600 mm, total length: 4,500 mm, total width: 800 mm, total height: 600 mm, overall weight: 550 kg, discharge height: 3,000 mm, power: 1.1 kW (1.50 HP), type of input current: three-phase, input frequency: 50 Hz, 371 conveyor belt 445x60cm paddle conveyor belt High performance paddle conveyor belt for sale in excellent condition length: 445cm speed: 18-21 meters/minute belt width: 60cm total width: 80cm belt paddle height 8 cm belt tray size: 52x29x8cm Laodsygcupepfx Albsh stainless steel cover steel frame drive: geared motor 380/220v 50hz 1.1kw weight: ca 550kg

Condition: used, No. 10019 Laodpfxjwhp H Ne Albsh Various conveyor belts Used Consisting of 6 positions Pos. 1: Blue conveyor belt, approx. 8000 x 800 mm LW, was used for waste Pos. 2: Orange conveyor belt, approx. 12000 x 1200 mm LW, as good as new Pos. 4: Two blue mobile conveyor belts, each approx. 10000 x 800 mm LW Pos. 5: Two turquoise conveyor belts, 1st belt approx. 10000 x 1600 mm LW, 2nd belt approx. 4500 x 1400 mm LW, very solid - with sheet metal floor, new motor and gearbox required Pos. 6: Blue Westeria conveyor belt, approx. 14000 x 1200 mm LW Pos. 8: Green mobile Z conveyor belt, approx. 7000 x 500 mm LW, new belt, as good as new Sale on behalf of customer, ex location near 85456 Wartenberg, without dismantling, without transport and assembly Errors in description and price excepted Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: excellent (used), 585 USED Thermo-oil tunnel oven DAUB-KAAK. EXTERNAL DIMENSIONS (in cm): - W: 400 - L: 2500 - H: 300 + 100 (at the end) - working dimensions of the belt: width 2.4 m x length 20 m TECHNICAL DATA: - number of levels: 4 - baking area: approx. 190 m2 EQUIPMENT: - bread or roll feeder for the oven - unloading the oven - conveyors transporting bread after baking about 20 m - spraying with water before and after baking - without heating boiler and burner - without steam generator The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. Lasdpfx Aljz Rivlebjh ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, power: 9.8 kW (13.32 HP), input current: 16 A, inner dimension length: 80 mm, inner dimension width: 120 mm, inner dimension height: 16 mm, total length: 140 mm, total width: 153 mm, total height: 200 mm, overall weight: 600 kg, number of chambers: 4, actuation type: electric, fuel type: electric, Wiesheu EBO 128-S multi-deck oven Separate control for lower and upper heating elements 4 decks, deck height: 16.5 cm Lodpfxszylhwe Albsah Oven is mobile with locking mechanism Modular construction Connection: 400V, 16A-CEE plug Dimensions: 1530 x 1400 x 2167 mm (W x D x H) Used oven

Condition: excellent (used), Year of construction: 2010, I sell the set of 3pcs. Grecon Dimter belt conveyor suitable for Industry use, for example wooden industry, material manipulation etc. Total length 2,00m Band width 300mm Feeding with electric motor 0,37kW / 0,55HP Laedpjt Rt I Hjfx Albeh Fully working. Available immediately.

Condition: used, Year of construction: 2006, Salva Triple Deck Oven Model NXM-20 Year 2006 In excellent condition Ket Deatures • Outer dimensions per deck 1452 x 1316 x 315 mm • Internal Chamber Dimensions: 952 x 911 x 200 mm • Capacity: 9 pizzas (ø 30 cm) or 2 trays (760 x 460 mm) per deck Laodpez Hmgrefx Albjh • Power Output: ~8.2 kW • Voltage: 230/400V (22.8/12.4 A) • Frequency: 50/60 Hz • Weight: ~170 kg (per module / deck) • Maximum Temperature: Up to 400°C / 725°F • Heating Elements: Ni-Cr ceramic heating elements embedded in refractory materials for uniform heat distribution

Condition: excellent (used), Year of construction: 2007, Twin drum spiral hot air oven direct from closed factory, this was used for pre-cooking burgers and nuggets. These machines are built for the high capacity cooking, grilling and steaming of a wide range of products, the degree of cooking, grilling or steaming is determined by the air temperature, the air speed, the air humidity and the time that the product is in the system. Lajdjmrrwfepfx Albsh Electrically heated. 96m x 600mm belt. Was in use from 2007 until 2016 when the contract moved to another factory. Machine is in lovely condition, we also have everything else used in the factory - formers, fryers, coating machines, filters, spiral freezers, bagging lines etc. Please note that the photos probably show two different ovens, both are very similar.

Condition: good (used), Tom Chandley Triple Deck Oven Each deck has top and bottom heating controls Digital oven temperature display Lodpsz Hmkqofx Albeah Manual thermostat control 150 to 600 including on/off facility In excellent condition

Condition: excellent (used), Year of construction: 2002, Consisting of: - 2 pieces hardening furnaces 10 Cg gross weight 400 kg - 1 piece of nitriding oven 8 Cg gross weight 400 kg - 1 piece spray washing machine - 2 pieces tempering furnaces - 1 piece of oil quench bath 5000 liters - 1 piece manipulator Lajdjzvfluepfx Albeh All technical data for the individual systems can be found in the attached pictures.

Condition: used, Year of construction: 1985, Working width 1350 mm Number of sanding units 3 st. VIET Wide-Belt Sanding Machine, Type Valeria 3CCT TM1350 ----- Sold on behalf of a client. The machine can still be viewed in operation for a short time! Machine No.: 30036022 Technical Specifications & Units ----- Working width: 1,350 mm Main drives: 3 separate electric motors located at the machine base to drive the sanding belts. Feed system: Perforated vacuum conveyor belt (vacuum bed) with an upstream rubberized infeed roller and a preceding roller table. Internal Unit Configuration: • 3 sanding belt stations. • Mechanical belt oscillation via upper tracking rollers. • Integrated pneumatic belt-cleaning blow-off systems (blow-off pipes located on the inner side of the units). • 1 unit equipped with a manually adjustable dial indicator/fine-adjustment mechanism on the sanding platen. Pneumatic Controls (upper control panel): • Pressure gauges and control valves for: belt tension (minimum tension), brake cylinders, belt oscillation, and internal pressure (for the sanding platen). • 3 separate toggle switches for the belt blow-off/air-jet systems (units 1, 2, and 3). Ljdpfx Alj Adfddobeah Electrical Control Panel (right-hand control panel): • 3 analog ammeters to display the load on the sanding belt motors. • 1 analog voltmeter. • Digital height display/thickness setting. • Main switches for the individual units (belt 1, belt 2, belt 3). • Selector switch for feed direction (climb milling/down-cut vs. conventional/up-cut mode). Technical specifications according to the manufacturer – no guarantee!

Condition: good (used), Conveyor belt for waste removal guillotine, three-knife, automatic die-cutter Production Germany Lodpfx Alsz N Sfmebjah Working width 52 cm, conveyor belt length approx. 300 cm. Discharge of scrap from under the machine directly to the container.

Condition: used, operating hours: 19,216 h, total width: 2,300 mm, total height: 2,400 mm, total length: 2,420 mm, Year of manufacture: 1998 Colour: White Empty weight: 2.000 kg - Year: 1998 - CE marking present: Yes - Serial number: 98055541 - Operating hours: 19216 - Number of units [pcs]: 3 - └ Unit 1: - - Position: Right - - Type of unit: Contact roller - - Sanding belt length [mm]: 1900 - - Sanding belt width [mm]: 1300 - - Roller diameter [mm]: 250 - - Roller material: Rubber - - Motor power [kW]: 18.5 - └ Unit 2: - - Position: Right - - Type of unit: Contact roller - - Sanding belt length [mm]: 1900 - - Sanding belt width [mm]: 1300 - - Roller diameter [mm]: 170 - - Roller material: Rubber - - Motor power [kW]: 15 - └ Unit 3: - - Position: Top - - Type of unit: Texturing brush - - Roller diameter [mm]: 140 - - Motor power [kW]: 0.55 Ljdpe Aazaasfx Albsah - Max. working width [mm]: 1300 - Min. working height [mm]: 2 - Max. working height [mm]: 165 - Infeed table length [mm]: 120 - Outfeed table length [mm]: 800 - Feed motor [kW]: 1.5 - Feed speed: Manual - Min. feed speed [m/min]: 5 - Max. feed speed [m/min]: 25 - Feed speed control: Continuously adjustable - Voltage [V]: 400 - Current consumption [A]: 35 - Fuse [A]: 63 - Power [kW]: 37.0 - Transport dimensions: 2420mm x 2300mm x 2400mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1988, A case annealing system is offered for sale. With digital temperature control. Equipped with ammonia dissociator and control cabinet. Inspection possible by appointment. Lodpoz Hdffofx Albjah

Condition: good (used), APPLICATION BELT with VIBRATING feeder Used machine A pneumatic slide valve from the vibro-feeding roller controls the dosing onto the application belt Overall dimensions: 2700 x 1300 x 2800 mm Lajdpfxotp Hd Uj Albjh Strap size 2400 x 140 mm Throat size: 1000 x 1300 mm Transport speed: 15 m/min

Condition: good (used), Year of construction: 1987, functionality: fully functional, Dear customers, we currently offer a very good, used vertical belt grinder for model and mold making, manufactured by F. Zimmermann. The technical details are as follows: Belt width: 250 mm Grinding height: 400 mm Belt length: 2,400 mm Belt speed: 18 m/s Work table: 750 x 350 mm Swivel range: 30/45° Power: 4.0 kW Speed: 1,400 rpm Dust extraction port diameter: 120 mm Dimensions: 990 x 850 x 1,740 mm Weight: 470 kg Equipment: - Foot-operated emergency stop - Machine light - Motorized table angle adjustment with digital display Ljdpfxsz S Eido Alboah Price plus VAT, which will be shown separately on the invoice.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, operating hours: 20 h, Well-maintained and fully functional wide belt sander, manufactured in 2020. Manufacturer: Holzkraft Model: LBSM 3005 ESE Year: 2020 Lajdez S Ufbspfx Alboh Working width: 300 cm. Electric height adjustment. The wide belt sander is in perfect condition, both visually and technically, and has been used very little. The machine can, of course, be inspected and thoroughly tested while powered on. The sale is to commercial businesses only and excludes any liability for material defects. No guarantee, warranty, or right of return.

Condition: used, Year of construction: 1990, TECHNICAL DETAILS General Information Machine Type: Continuous belt grinding machine Application: Grinding and/or polishing of round materials Grinding Stations: 2 Ledpfxsz S I Rds Alboah Machine Weight: approx. 6.5 t Working Area Working Area Diameter: 30 mm Material Length: 3,000–6,000 mm Speed: 20 m/min Dimensions Space Requirement: approx. 9 × 2 × 2.4 m EQUIPMENT 2 Grinding Units

Condition: used, Year of construction: 2012, functionality: fully functional, type of input current: AC, total length: 16,000 mm, total width: 8,000 mm, input frequency: 50 Hz, temperature: 58 °C, heating capacity: 120 kW (163.15 HP), We are offering this used SCHIELE Trockenkabine 80mm MW switchgear and switch cabinet, manufactured in 2012. Manufacturer: SCHIELE Model: Trockenkabine 80mm MW Year of manufacture: 2012 Description - Type of oven: Trockenkabine 80mm MW (Continuous flow dryer) - Year of manufacture: 2012 - Order number: 21204763 - Configuration: 2 identical compartments - - Each compartment: 8 m wide × 16 m long - Total: 2 compartments (therefore 2 × the specifications below) Each compartment has its own heating system (120 kW) and its own circulation fans. Specifications per compartment / Heating (Heizung) - Heating medium: Natural gas H (Erdgas H) - Installed heating capacity: 120 kW - Max. drying temperature: 58 °C - Max. temperature of the heating surfaces: 58 °C Airflows (per compartment) - Circulation volume flow (Umluftvolumenstrom): 2 × 22,500 m³/h = 45,000 m³/h total - Fresh air supply (Zuluftvolumenstrom): 900 – 3,600 m³/h (adjustable) - Min. exhaust volume flow at 20 °C (Mindestabluftvolumenstrom): 900 m³/h Fans / Motors (per compartment) - Circulation fans: 2 motors × 7.5 kW each → total 15 kW Laode Aax Ibepfx Alboh - Speed: 1,450 min⁻¹ (rpm) - Exhaust fan: 1 motor of 1.5 kW - Speed: 1,450 min⁻¹ - Max. VOC / solvent throughput - Höchstzul. Lösemitteldurchsatz: 7,600 g/h (grams per hour) - Gas burners (Weishaupt WG10N/1-D ZM-LN) The first photo shows the burner plate. Each compartment has one of these burners. Per burner (Weishaupt WG10N/1-D ZM-LN): - Capacity: 25 – 110 kW (modulating / sliding two-stage) - Fuel: Natural gas (Natural Gas E/LL) — also suitable for LPG, but set to natural gas - NOx class: NOx-CL 3 (low NOx emissions) - Voltage: 230 V, 50 Hz - Max. back pressure combustion chamber: see capacity chart (typically up to ±2.5 mbar) - Emissions: Complies with class 3 or 5 according to EN 676 (depending on the exact design and combustion chamber) - Burner weight: approx. 14 kg If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: ready for operation (used), * Brand: Henkel * On stock: 4 pieces. * 1x: A-A length = 12500 mm. Ljdps Aabdrsfx Albeah * Beltwidth: 800 mm. * Driving: 7,5 kW gearbox. * 1x: A-A length = 14500 mm. * Beltwidth: 800 mm. * Driving: 7,5 kW gearbox. * 1x: A-A length = 20000 mm. * Beltwidth: 650 mm. * Driving: 5,5 kW gearbox. * 1x: A-A length = 20000 mm. * Beltwidth: 650 mm. * Driving: 11 kW gearbox.

Condition: good (used), Year of construction: 2017, Deburring/grinding machine from Costa Lodpfe Aayf Ujx Albeah Type MD4 VC 1150 Belt width 1150 mm Vacuum table For grinding and minimal edge rounding Equipped with an AL-KO dust extraction system (excluding filters)