Used Slitting Line With Packing Line for sale (13,258)

Condition: used, 72”x 0.5” x 60,000Lb Braner Turret Type Loop Slitting Line Braner Turret Type Loop Slitting Line is used for coil metal cross cutting with maximum width 72”, maximum 0,5” metal thcikness and 60,000Lb coil capacity Make: Braner Year New: 1996 Material Thickness: .060″ – .500″ Material Width: 12″ – 72″ Coil Weight: 60,000Lb Line Speed: 120 – 250 feet per minute Coil ID: 20″ – 24″ Coil OD: 75″ Slitting Cap: .500″ / 4 cuts – .125″ / 40 cuts Entry L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Control Panel Mandrel Uncoiler Powered Hold – Down Roll Outboard Bearing Support Hydraulic Feed-Up Drive Water Cooled Brake Hydraulic Peeling Table Driven Entry Pinch Rolls Adjustable Edge Guides Entry Mechanical Crop Shear Two Turret Type Slitting Heads Arbor Diameter: 12″ Powered Arbor Adjustment Powered Head Rotation Motor: 100HP DC Drive Lots of Knives & Tooling Two (2) Scrap Winders Powered Open / Close Heavy Duty Design Looping Pit Cross Over Table Drag Board Tension Stand Material Feeding Table Recoiler Hydraulic Drum Powered Push Off Hydraulic Over-Arm Separator Outboard Bearing Support 300HP DC Motor Drive Exit L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Nwjdpfxsrn Sqhs Ag Ion Upgraded Siemens Digital Drives, Electrics, Controls, Knives & Tooling

Year of construction: 2022, condition: excellent (used), functionality: fully functional, 2 x Packing lines, previously used for salad leaf, consists of; 1 x Multipond MP-14-7100-2500-J plus infeed + gantry Nedjz Arlhopfx Ag Iswn 1 x Multipond MP-14-3800-1250-J plus infeed + gantry 1 x VH Centurion SI440 (VFFS) with printer + label applicator 1 x GIC4100 (VFFS) with printer + label applicator 2 x Loma checkweigher + metal detector combination 2 x packing tables All machinery is fully working and ready to be decommissioned

Condition: ready for operation (used), Plastic Film Wash Line with Extruder Available in Ireland Can be seen running if necessary Sink Float Tank Centrifuge Washer Dryer Extruder Granulator Shredder Everything required for the washing and recycling of Plastic Material 1 Tonne per Hour Nedezylxiepfx Ag Iewn

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, input voltage: 400 V, workpiece height (max.): 2,100 mm, workpiece length (max.): 2,000 mm, Ideal-Line Powder Coating Line | Gema Automatic Booth | 17 Guns | Chemical Pretreatment | 250 m Overhead Conveyor Complete Powder Coating Line 3-stage chemical pretreatment system | Dry-off oven | Automatic powder coating booth with recovery system | Curing oven | Overhead conveyor For sale: a complete used powder coating line in good working condition. The line is technically operational and designed for continuous coating of steel and aluminum components. The line consists of: • Overhead conveyor system • Surface pretreatment section • Dry-off oven after washing • Automatic powder coating booth • Powder recovery system with cyclone and filtration unit • Curing oven • Loading and unloading stations • Control cabinet and automation system _____ Technical Specifications • Manufacturer: Ideal-Line, booth and application system by Gema • Year of manufacture: 2012 / 2015 • Maximum part dimensions (L × W × H): 2000 × 750 × 2100 mm • Powder application system: Gema automatic system with 17 powder guns • Pretreatment: 3-stage chemical pretreatment washer • Oven heating source: Direct-fired natural gas • Conveyor length: Approx. 250 m • Power supply: 400 V _____ Technical Condition The line has been regularly maintained and operated in continuous production service until 30 September 2026. _____ Additional Information • Technical documentation available • Sale due to plant closure Nwsdoz Rnu Tjpfx Ag Ien • Inspection available by appointment • All de-installation and removal costs buyer is responsible Location • Koszalin, Poland Price • Cena: 369 000 EUR excl tax

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: Serial No.: 167, type of input current: three-phase, input voltage: 380 V, total width: 800 mm, total length: 5,300 mm, total height: 1,900 mm, year of last overhaul: 2025, overall weight: 2,200 kg, pressure: 70 bar, We offer this used Ruian 260 blister packing line, year of construction 2019. Punching frequency: 21 times/min Max pulling length: 230 mm Max forming depth: 20 mm Max forming area: 250×220 mm Total power: 12 kW Voltage: 380 V Voltage frequency: 50 Hz Air consumption: 1 m³/min Pressure: 7 MPa Machine dimensions: 5300×800×1900 mm Weight: 2200 kg Nwsde Adq Ibspfx Ag Ijn If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 2013, condition: ready for operation (used), functionality: fully functional, IQF BERRIES FULL CLEANING-PACKING LINE EQUIPMENT FOR SALE All in good working condition serviced and prepared for work. Capacity 1500kg per hour depending on raw material. Previously used for cleaning and packing IQF Wild Bilberries, Lingonberries, Cranberries. Possible to adjust line also for other cultivated berries (red, black currants, sea buckthorns and others). Line consists of 18 different equipment units. Video is also available on request. Nedjzy Rcgspfx Ag Iswn 1. Container tripler – MEGA 2013 2. Bunker hopper with breaker – MEGA 2013 3. Vibration sieve for bunker – MEGA 2013 4. Screw conveyor – MEGA 2013 5. Air separator – JAM 2009 6. Stalk removing machine – JAM 2009 7. Polishing machine – JAM 2009 8. Screw conveyor – JAM 2009 9. Vibration sieve with ventilator 10. Vibration table for spreading berries 11. Laser Sorter BEST (Tomra) LS9000 with EOS upgrade 12. Air compressor for laser sorter - M-Press - 2106 13. Belt conveyor for manual inspection 14. Cassel X-ray Scanner 2020 15. Lifting conveyor 16. Dosing machine – MEGA 2013 17. Roller conveyor with control scale – MEGA 2013 18. Metal detector – Mesutronic 2013

Condition: used, Slitting line SECO 60″ x 0.375″ x 50,000Lb (A3791) is perfect solution for longitudinal coil metal cutting into strips with maximum metal thickness 0.375” and maximum coil width 60” Cold Rolled and Hot Rolled Steel 18-60” Strip Width 2 Speed Gear Box 200-500 FPM Thickness: .032″-.375” Nodpfx Agstiy Nte Iewn Complete Line with the Following Components: L-Type Entry Coil Car 40,000# Max Coil Weight Uncoiler: Coil ID: 23-30.50” Coil OD: 72” Maximum Coil Weight: 40,000# Maximum Sliding Base Hydraulic Expansion Peeler and Hold Down Roll 5 Roll Coil Breaker Entry Adjustable Edge Guides Entry Crop Shear Slitting Head: 10” Arbors 40 HP Motor Drive 2 Scrap Winders Recoiler: Coil OD: 72” Max Coil ID: 24” 150HP DC Motor 3 Arm Exit Turnstile 40,000# per Arm Motorized Turn Complete Line with Knives, Rubbers, and Spacers Controls, Hydraulics, and Electrics

Year of construction: 2003, condition: good (used), functionality: fully functional, 1 x Gainsborough Engineering Ltd packing system, previously used to pack small machine components. Comprising of infeed pocket conveyor, vertical form, fill and seal bagger fitted with Zodiac HS printer and an outfeed conveyor. Manufacturer - Gainsborough Engineering Ltd. Model of VFFS bagger – GV2K1. Nwedpfx Agoy Hlvwo Isn Date of manufacture – 2003. Sealing bars - 250mm long (vertical & horizontal). Reel width - 505mm. Current film - 230mm. Forming tube - 60mm diameter. Sorting / infeed table - 1500mm long x 710mm wide. Outfeed conveyor - 290mm wide belt x 950mm outfeed. Overall footprint - 6.15m long x 1.7m wide x 2.2m high. Condition – Fully operational.

Condition: excellent (used), functionality: fully functional, coil weight: 8 kg, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, total width: 1,250 mm, Slitting line for sale Nsdpfxov Twi Rs Ag Ijwn

Condition: excellent (used), Year of construction: 2016, operating hours: 9,001,700 h, functionality: fully functional, machine/vehicle number: N/A, PACE MEAT BONING LINE FOR BUTCHERY OPERATION. Nsdpfsy Uk A Sjx Ag Iewn DOUBLE SIDED PACE BUTCHERY CONVEYOR LINE EXTENDING TO A TRIMMING AND PACKING LINE APPROX LENGTH 28m. SPACE FOR 16 BUTCHERS 8 PER SIDE WITH CENTRAL BONE REMOVAL CONVEYOR . SPACE FOR BANDSAW AND DERINDER MACHINES WITHIN THE PROCESS. VARIABLE SPEED CONVEYOR TO DICTATE PACE SPEED OF LINE .

Condition: ready for operation (used), Everything you need for an efficient packaging line! The packaging line consists of: 1) Case erector 2) Case sealer 3) Conveyor belt Nedpfx Agjz Hirqj Ijwn We have used it in our warehouse to pack orders. We purchased the machine from a factory where it was part of a similar line. It works exactly as it should. Contact us today.

Condition: used, A complete line from weigher to shipping case, offered as one set This automatic line weighs products, packs them in bags and places the bags in shipping cases, in one continuous process. On top sits a Yamato Dataweigh multihead weigher in stainless steel, which doses the product accurately into a GEA CFS SmartPacker SX400. This vertical form-fill-seal machine has the Quattro Seal version, for four-side sealed bags that stand up well. The SmartPacker has automatic film unwinding, integrated sealing units and a touchscreen with recipe management. After packing, a BluePrint Automation HVP system from 2003 takes care of product handling and transport, after which a Rembrandt Packaging / Lantech case packer from 2005 places the bags in cases automatically. The associated conveyor systems are included. The line suits a range of dry and free-flowing products, depending on configuration, and is only offered as a complete set. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Complete weighing, packaging and case packing line Weigher: Yamato Dataweigh multihead weigher, stainless steel Packaging machine: GEA CFS SmartPacker SX400 (VFFS), Quattro Seal Product handling: BluePrint Automation HVP, built 2003, serial no. V0784, 16 kVA, 230/400 V 50 Hz Case packer: Rembrandt Packaging / Lantech RCE-I-T-M, built 2005, 400 V 50 Hz, 2 kW, 6 bar Nwsdez R Itvjpfx Ag Ien Conveying: Associated conveyor systems included Suitable for: Dry and free-flowing products, depending on configuration Offered: As a complete set only

Condition: used, Year of construction: 2018, functionality: fully functional, number of straightening rollers: 6, conveyor belt width: 1,300 mm, sheet thickness steel (max.): 1 mm, coil width: 1,250 mm, cutting length (max.): 6,400 mm, straightening roller diameter: 70 mm, space requirement width: 3,500 mm, space requirement length: 18,275 mm, space requirement height: 4,000 mm, Single-person operation, rapid access to a wide variety of sheets, automatic sheet changeover, standard sheets remain loaded in the system; the upper sheets are less common types; secure solution with a movable access aid for loading the upper decoilers; programmable slitting line with 8 pairs of knives in station version; slitting knives are alternately arranged for distortion-free cutting; rotary knives of the AL p with 100 mm diameter to achieve minimal incision; 7.2 m long conveyor belt for discharging the strips. The system layout PDF is shown as a mirror image! Nwsdpfx Agexwc E Is Ijn

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, total width: 1,700 mm, total length: 1,100 mm, total height: 1,100 mm, input voltage: 380 V, SLITTING AND PROFILING MACHINE YF-LS Nodo Afhg Depfx Ag Iewn Six blades

Condition: used, Year of construction: 1982, Used cut-to-length line FIMI 1250×0.12-0.8mm x16t with two packing stations (A3793) is coil metal processing line to cut metal into sheets with required sizes. Such machine can be good solution for metal coil processing companies. Manufacturer : FIMI – Italy Year of manufacture : 1982 Revamping : 2008 (SEI SISTEMI) and 2019 (SEI SISTEMI) Ce marking : 2019 Material before processing : Max coil width 1250 x 0.12 Г· 0.80 mm. Uncoiler capacity : 16 Tons. Sheets dimensions : min. 300 x 500 mm. – Max 1250 x 2000 mm. Working speed 0-120 m/min. LIST OF MACHINES COMPOSING THE LINE ➢ STOCKING RAMP FOR 2 COILS ➢ COIL LIFT ON UNCOILER ➢ UNCOILER WITH SECTORS DIAM. 400 AND DIAM. 508 MM. ➢ PINCH-ROLL FOR STRIP FEEDING TO LEVELER ➢ 6HI-LEVELLER WITH INTERCHANGEABLE ROLL BENCHES – 1 BENCH FOR THICKNESS 0.12 ÷ 0.50 MM. – 1 BENCH FOR THICKNESS 0.50 ÷ 0.80 ➢ CONNECTION TABLE BETWEEN LEVELER AND PINCH-ROLL ➢ PINCH-ROLL ➢ DESCENT ROLLWAY IN LOOPING PIT ➢ ASCENT ROLLWAY FROM LOOPING PIT ➢ PINCH-ROLL WITH MOTORIZED ROLLS ➢ STRIP CENTERING DEVICE WITH VERTICAL ROLLS ➢ THICKNESS MEASURER TYPE ELECTRONIC KEYBOARD ➢ ROTATING SHEAR ➢ SWIVELLING CONVEYOR TO AVOID SCRAPS AND PARTS OF DEFECTIVE STRIP ➢ COLLECTION BOX FOR TRIMMING AND DEFECTIVE PARTS OF THE STRIPS ➢ SWIVELLING CONVEYOR TO AVOID SCRAPS AND PARTS OF DEFECTIVE STRIP IN THE FIRST AND SECOND COLLECTION BOXES AND STACK COMPOSITION ➢ CONNECTION ROLLWAY AND SECTION FOR CONVEYING OF SHEETS IN THE THIRD BOX. ➢ 3 STACK UNLOADING SHUTTLES TO CONVEY STACKS TOWARDS THE ROLLWAY ➢ 1 EVACUATION ROLLWAY FOR THE PACKAGING ➢ HYDRAULIC EQUIPMENT FOR ALL THE LINE Nwodpfottlfksx Ag Ion ➢ INTRODUCTION STRIP OPERATION PULPIT LOCATED AT LINE ENTRY FOR COILS CUTTING ➢ MAIN PULPIT FOR ALL LINE OPERATIONS ➢ OPERATION PULPIT LOCATED AT LINE EXIT ➢ ELECTRICAL CABINET CONTAINING ALL ELECTRICAL/ELECTRONIC COMPONENTS AND PLC ➢ PHOTOCELLS AND SAFETY/PROTECTION BARRIERS.

Condition: excellent (used), Year of construction: 2020, operating hours: 97 h, functionality: fully functional, machine/vehicle number: 098 / SCS, # KRASSER Centurio 1250 – Year of Manufacture 2020 – Slitting Line with 5 Automatic Knife Pairs, Leveling Unit, and Guillotine Shear For sale is a very well-maintained KRASSER Centurio 1250 from the year 2020. The machine was taken from an operational business and is in very good, immediately operational condition. It is ideally suited for sheet metal workshops, roofing companies, facade builders, and sheet metal processing companies for the economical processing of coil material. A special advantage: the machine recently underwent a comprehensive service by the manufacturer, Krasser, as part of the take-back process. ## Technical Data * Manufacturer: KRASSER GmbH, Austria * Type: Centurio 1250 * Year of Manufacture: 2020 * Machine Number: 098 / SCS * Power: 32 kW * Connection: 3 x 400–488 V AC, N + PE, 50–60 Hz * Weight: approx. 3,600 kg ## Equipment * 5 automatic knife pairs * Integrated guillotine shear * Leveling unit * Robust industrial design * High production output * Precise slitting results The KRASSER Centurio 1250 impresses with its high manufacturing quality, reliability, and economy. The extensive equipment enables efficient and precise processing of coil material while simultaneously reducing setup times. Nodpfx Agozcunae Iswn The machine is immediately available and ready for sale. Inspection is possible by appointment.

Year of construction: 2018, condition: new, functionality: fully functional, machine/vehicle number: 4743, New S-DAI Industrial Zipper Sealing with In-Line Folding Machine Industrial film-processing system manufactured by S-DAI Industrial Co., Ltd., Taiwan, designed to combine film handling/folding with zipper feeding, positioning and sealing in an integrated machine. The equipment is new/unused. Original machine drawings, manuals and supporting technical documentation are available. Folding Section Njdpoz Aak Ejfx Ag Iswn 2 HP AC servo-driven material unwind Dancing roller Unwind-diameter monitoring Laser sensor Controlled web handling and folding system Zipper Sealing Section V-board moving device EPC (Edge Position Controller) Air shaft PLC control box Motor-driven zipper unwind Dancing rollers for zipper and material Zipper sealing device with cooling 2 thermal/temperature controllers Infeed rubber roller with 1/2 HP motor Nip roller with 1/2 HP motor Electronic controller Material-empty and zipper-empty warning signals Machine start/stop signals Zipper tape unwind gear ratio: 10:1 Additional Unwind / Tension-Control Equipment Extra unwind air shaft Low-tension unwind system 1/2 HP infeed motor and inverter Infeed roller SICK ultrasonic diameter monitoring Dancing roller 2 guider-roller sets Distance-checking laser Associated program design Condition: NEW / UNUSED Documentation: Original drawings, manuals and supporting technical documents available.

Condition: excellent (used), Cut to length - Slitter input width 1250mm Nwodpfxezyyt Is Ag Isn thickness; 0.35-2.2mm input coil : 6.5ton, output 6.5 ton.

Condition: good (used), Year of construction: 2018, Approx. 600m conveyor system, packing line, SSI Schäfer – used Price ex works (net): only €99,500, disassembled, packaged, and loaded! Manufacturer: SSI Schäfer Year of manufacture: 2018 Type: Conveyor system Many short sections/elements Roller width mainly 70cm, element width approx. 78cm Motorized roller conveyor Belt pusher Belt conveyor Incl. curved belt conveyor from Transnorm Curve/wedge merge (roller conveyor curves) Tapered roller curve Roller switch Back-up roller conveyor Folding elements/passages Etc. Ground floor, 6 roller conveyors for goods in and out with conveyor belt drive - 1st floor, five roller conveyors to supply 80 workstations with conveyor belt drive - 1st floor, five roller conveyors to remove goods from 80 workstations with conveyor belt drive - 1st floor, used cardboard belt conveyor for removing cardboard boxes with conveyor belt drive Incl. various belt conveyor curves from Transnorm Used cardboard box sizes (L x W x H): max. 800x600x320mm, min.: 340x120x119mm, max. weight 32kg, min. 1kg The offered price includes control cabinet, control system, light barriers, transitions, etc. Not included in the price (but can be purchased for an extra charge): the 80 packing tables, 2 spirals. Condition: good Nwodpjzpf Nyefx Ag Isn Available: from approx. August 2026, or by arrangement Location: Erfurt area

Condition: new, Year of construction: 2026, functionality: fully functional, number of straightening rollers: 2, sheet thickness (max.): 2 mm, number of blades: 6, type of input current: three-phase, warranty duration: 12 months, total width: 1,700 mm, total length: 2,300 mm, total height: 1,800 mm, product width (max.): 1,250 mm, number of feed rollers: 2, YF-S electric machine for longitudinal and transverse slitting of coils with a width of 1250 mm. Nedpfx Ae Afgzmog Ijwn

Condition: used, Year of construction: 1998, functionality: fully functional, For sale: Coil metal decoiling, slitting, and recoiling line Condition: used, connected – available for live demonstration. Designed for coil metal decoiling, precise slitting into narrower strips, and recoiling into smaller coils. Technical specifications: Year of manufacture: 1998 Made in: Poland Max. metal width: 1250 mm Knife pairs: 5 Longitudinal slitting, steel: min 0.4 mm / max 1.2 mm Film application function Scrap cutting guillotine Line includes: Decoiler 5 T Recoiler 5 T Multi-knife disc shears Braking and separating segment Turnstile with separator Control panel Purpose: Nsdpfxjxlcp Ne Ag Ijwn The line is intended for preparation of coil metal for further processing: decoiling, precise longitudinal slitting, recoiling into smaller coils. If you have further questions – we will be happy to assist you.

Condition: new, Year of construction: 2025, For customers from: Lithuania, Latvia, Estonia. Equipment for straightening, longitudinal cutting, and shearing rolled metal is an integral attribute of companies working with sheet metal. The FORSTNER company, which has long-term experience in the production of rolled metal processing machines, currently offers the market not only conventional metal shearing machines, but also equipment that performs straightening, longitudinal cutting, and shearing functions. The shearing function is performed using disk or guillotine shears. Depending on your production goals and the tasks the equipment must perform, they can be divided into four groups: 1. shearing machines; Nedpswd E N Eefx Ag Iewn 2. longitudinal cutting and shearing machines; 3. straightening and shearing machines; 4. straightening, longitudinal cutting, and shearing machines. The straightening and longitudinal cutting functions of certain models of longitudinal cutting machines can be automated, which allows you to quickly and conveniently change the parameters when starting to work with another material. Forstner EASY series equipment is a machine that cuts a sheet of metal of a set length with the help of a guillotine or circular shears. EASY CUT machines are equipped with circular shears that can cut steel up to 1.0 mm thick. If you need a machine that can cut thicker metal, then it is recommended to choose the EASY PRO model with a guillotine. The working width of the machines can be 1250 mm or 1500 mm. Forstner STRAIGHT. These machines, by pulling a set length of a sheet of metal, straighten it and cut it. Depending on the type of cross-cutting knife and the diameter of the straightening rollers, the thickness of the processed metal varies from 1 mm to 2 mm. STRAIGHT and POWERSTRAIGHT also differ in the adjustment of the straightening rollers: mechanical or automatic. Integrated automatic control saves time in the long term, because changing the operating parameters of the machine is enough to press one button. Automatic control is a great choice when working with many different materials. The Forstner SLIT series is a reliable assistant when cutting rolled metal. The SLIT CUT and SLIT PRO models not only cut the metal, but also cut it lengthwise into strips of the selected width. As standard, these models are equipped with 5 longitudinal cutting knives (the maximum number of knives is 7). The main difference between the SLIT CUT and SLIT PRO models is the type of cutting knife - a circular shear or a guillotine. The Forstner COMPACT series is a device that pulls the required length of material, flattens it, cuts it into strips of the desired width and cuts sheets of a set length. The main difference between the models is the type of knife used for cutting: a circular shear or a guillotine. The flattening rollers and longitudinal cutting knives are mechanically adjusted. POWER COMPACT is a powerful equipment for flattening, longitudinal cutting and shearing rolled metal. These two models differ in working width and cross-cutting metal thickness. NuSLIT machine models are fully automated equipment. If you are looking for an automatically controlled machine that performs longitudinal cutting and cutting functions, you should choose the nuSLIT PRO or nuSLIT PROCUT models. The difference between these two models is the type of cutting knife: guillotine or segmented disc shears. NuSLIT STRAIGHT PRO and nuSLIT STRAIGHT PROCUT, in addition to the above functions, also smooth the metal sheet.

Condition: excellent (used), Complete slicing & packing line from CFS & Variovac consisting of 1x CFS Uni slicer whit scale and outfield conveyor, 1x Variovac Primus thermoformer whit 2x tools No 1. 1:2 277 x 177 mm Maximum deep 110 mm made for Swedish Wallet packets. No 2. 1:3 202 x 111 mm Maximum deep 110 mm. The line is fully complete and there is a knife sharpener including for the slicer. Njdpfx Agjxl Tzis Iewn Convenience Food Systems automatic slicer line, consisting of: type: UNI-SLICER, number: 450.2251, year of construction: 2004, plastic belt, belt width: 230 mm, clearance: 260 mm x 140 mm, diameter knife: 420 mm, slicer dimensions: 2550 mm x 880 mm x 2170 mm. Dividing belt, wire belt, belt width: 270 mm, dimensions: 850 mm x 610 mm x 1110 mm. Check weigher, type: CW2000MK3 091.1992, year of construction: 2004, plastic belt, belt width: 275 mm, dimensions: 700 mm x 780 mm x 1100 mm. Outfeed belt, type: ATB 791 991.1994, plastic belt, belt width: 400 mm, dimensions: 3030 mm x 900 mm x 1260 mm. Knife sharpener,

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 133/SCS, cutting speed: 35,000 mm/min, working width: 1,250 mm, feed rate X-axis: 35 m/min, product width (max.): 1,250 mm, number of straightening rollers: 7, We are offering a very well-maintained Krasser CENTURIO 1250 stand-alone slitting line, manufactured in 2023, for sale. Highlights Reinforced 7-roll leveling unit Max. coil width 1,250 mm Cutting speed up to 35 m/min Suitable for longitudinal and transverse cutting as well as leveling of strip steel Modern control system with touch operation Very well-maintained condition Ready for immediate use Technical data Manufacturer: Krasser Model: CENTURIO 1250 Type: Stand-alone slitting line Year of manufacture: 2023 Condition: Very good Max. coil width: 1,250 mm Min. coil width: 250 mm Description The Krasser CENTURIO 1250 is a powerful sheet metal cutting system for the precise processing of steel, stainless steel, aluminum, copper, and zinc sheets. The reinforced 7-roll leveling unit is particularly noteworthy, as it enables excellent leveling quality and reliable processing of a wide variety of materials. The system is currently still in operation and can therefore be inspected at any time by appointment while running. This offers interested parties the opportunity to directly verify the condition, performance, and functionality of the machine. The machine is expected to be available in the first quarter of 2027. The exact date may vary slightly depending on the project, but we currently anticipate a release around February 2027. Early reservation or coordination of the delivery date is possible and desirable. Contact For further information, technical details, or to arrange a viewing appointment, we look forward to receiving your message or call. Nsdpezvgbqefx Ag Iswn Category ID: 1052 Type ID: 136 Type: Slitting line

Condition: new, Year of construction: 2026, functionality: fully functional, number of straightening rollers: 2, sheet thickness (max.): 2 mm, number of blades: 6, type of input current: three-phase, warranty duration: 12 months, total width: 1,700 mm, total length: 2,300 mm, total height: 1,800 mm, product width (max.): 1,250 mm, number of feed rollers: 2, Hydraulic slitting and cut-to-length machine for coils with a width of 1250 mm. Nwjdpfo Afd Idox Ag Isn Model: YF-S.