Used Sigmar & Peerless Q80 & Q60 for sale (37)

Condition: good (used), 2 Bakery Mixers Sigmar - 60 QT, year 2011 complete with stainless steel bowl and attachments and stainless bowl carrier Peerless Bakery Mixer - 80 QT, complete with stainless steel bowl and attachments Iijdpoiqg Uuefx Abnjf

Condition: good (used), Gears, spur gears, bevel gears, worm gears -Manufacturer: Himmel, gearbox type DF41 - KQ60 - (Q60) -Translation: i 18.93 -Drive shaft: Ø 30 x 60 mm -Hollow shaft: see photos -Ma: 330 Nm -Dimensions: 375/200/H225 mm -Weight: 27.3 kg Isdjhu Hwuopfx Abnsif

Condition: good (used), Schneider Senator PL1 Q-600-H Paper Stack Lift This machine is in perfect condition, practically new. Hydraulic drive, state-of-the-art hydraulic unit. 400V power supply. Automatic and manual lifting cycles, fast operation. Iiedpjztz D Ijfx Abnof Load capacity: 600 kg. Pallet/sheet dimensions: 760 x 1090 mm

Condition: used, overall weight: 400 kg, Year of construction: 2021, operating hours: 5,500 h, Equipment: quick-change device, OilQuick OQ80SW, fully hydraulic Year of manufacture: 2021 Approx. 5,500 operating hours Suitable for excavators up to 45 tons Approx. 400 kg GPS pre-installation Stick width: 41 cm (expandable to 47 cm) Iedpfx Abszu Akxjneif Pin diameter: 9 cm Hole spacing: 49 cm

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 7783, Year of construction: 2010, operating hours: 13,980 h, load capacity: 6,000 kg, lifting height: 6,000 mm, free lift: 2,000 mm, fuel type: diesel, mast type: triplex, construction height: 2,800 mm, motor manufacturer: Perkins, gearing type: other, fork carriage width: 1,500 mm, fork length: 1,400 mm, fork width: 200 mm, fork thickness: 50 mm, tire condition: 80 %, front tire type: pneumatic tires (air-filled), rear tire type: pneumatic tires (air-filled), total height: 2,800 mm, total length: 4,800 mm, total width: 2,200 mm, color: red, Equipment: UVV, cabin, full service history, lighting, trailer coupling, We offer this ready-to-use Baumann DFQ 60/14/60 side loader; 6 tons; triplex mast, manufactured in 2010. Iisdpfxezkr D Ts Abnsf Manufacturer: Baumann Model: DFQ 60/14/60 Year of manufacture: 2010 Condition: ready for use Load capacity: 6 t Mast type: triplex mast If you have any questions or require further information, please send us a message or call us.

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, spindle diameter: 128 mm, spindle speed (max.): 3,500 rpm, table length: 850 mm, table width: 850 mm, feed length X-axis: 1,600 mm, feed length Y-axis: 920 mm, feed length Z-axis: 950 mm, workpiece weight (max.): 5,000 kg, year of last overhaul: 2024, WFQ80CNC, Overhaul 2008 | 3.0585A ■ T-TYPE HORIZONTAL BORING MILL ■ PRODUCER: TOS VARNSDORF ■ OVERHAUL YEAR: 2008 (RETOS) ■ CONDITION: USED, EXCELLENT ■ WARRANTY: YES ■ IN STOCK SPECIFICATION ■ Heidenhain TNC426 control system with handwheel HR410 ■ SIEMENS motors and drives ■ operator housing against swarf and water ■ magnetic swarf conveying system SCOPE OF REPAIR 2024 ■ cleaning, revision and technical inspection Isdpeztqq Djfx Abnjif ■ replacement of Heidenhain TNC426 control system ■ refurbish of electrical cabinet ■ exchange of damaged cables ■ repair of control panel ■ complete machine geometry repair (geometric accuracy protocol on request) ■ revision of drives (new ball screw bearings X+Z) ■ revision of headstock ■ revision of hydraulic power pac ■ revision of lubrication and clamping ■ new telescopic covers

Condition: excellent (used), Demolition sorting grapple, plug-in type, G21 / OQ80. Iiedey S Rxuopfx Abnjf

Condition: ready for operation (used), functionality: fully functional, Oil Quick Pins ØShank Pin Distance Price: OQ70 60/60 280 330 €3,000.00 OQ80 90/90 345 510 €3,500.00 OQ80 90/90 353 515 €3,500.00 QO80 90/90 355 510 €3,500.00 OQ80 100/90 387 530 €3,500.00 OQ80 100/100 420 610 €3,500.00 OQ80 90/90 350 510 €3,500.00 OQ80 90/90 350 500 €3,500.00 OQ80 90/90 350 510 €3,500.00 OQ80 80/80 310 475 €3,500.00 OQ90 110/100 440 595 €18,000.00 OQ90 without mount €15,000.00 OQ90 110/110 470 590 €18,000.00 Verachtert Pins Ø Shank Pin Distance CW40 80/80 310 445 €2,000.00 Lehnhoff Pins Ø Shank Pin Distance Isdpfxexhdh Sj Abnsif HS21 80/80 465 333 €2,000.00 HS21 80/80 305 475 €2,000.00 Additionally, adapter plates available Liebherr Pins Ø Shank Pin Distance SWA 48 65/65 253 370 €2,000.00 SWA 48 80/70 350 420 €2,000.00 SWA 48 80/80 327 460 €2,000.00

Condition: used, functionality: fully functional, Year of construction: 2017, load capacity: 6,000 kg, lifting height: 4,700 mm, fuel type: diesel, mast type: duplex, construction height: 3,200 mm, drive type: Diesel, Side loader Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: good Iijdpfx Aezn A Tysbnjf

Condition: used, Year of construction: 2021, operating hours: 6,500 h, * Hitachi ZX250 LCN-7 * Year of manufacture: 2021 Iiodpfjznq T Uox Abnsf * 6,500 hours * 140 kW Isuzu engine * 28,300 kg * Variable boom extension * OQ80SW, fully hydraulic quick coupler * Air conditioning * Central lubrication system * 270° camera * GPS preparation

Condition: new, Year of construction: 2025, functionality: fully functional, shaft length: 1,070 mm, laser power: 60 W, type of cooling: air, warranty duration: 12 months, laser wavelength: 1,070 nm, Equipment: cabin, Laser engraving machine with 60-watt laser power (new) - 60-watt MOPA laser (enables color laser engraving on stainless steel) - incl. 4th axis (rotary unit) - incl. Windows 10 Pro 64-bit PC system - incl. 22" monitor - everything fully installed and calibrated - Engraving software in German - very easy to operate - switch on and start - Fiber laser source with 60 watts for high-contrast and fast markings with extremely high resolution (see images) - Deep engraving up to 4mm possible (also in hardened steel) - Wobble function, e.g., for cleaning metal components - for engraving on many metals (stainless steel, brass, aluminum, etc.) and many plastics - heavy-duty industrial quality - Complete system / ready for immediate use - Working area approx. 500 x 600 x 600mm (l x w x h) - Clamping surface with fastening threads in a 50mm grid - LED work area lighting - 50mm pipe connection for fume extraction Iedpfxofkgq Ns Abnsif - Engraving area approx. 180 x 180mm - expandable to approx. 300 x 300mm - incl. foot switch to start the engraving process Please also note our attractive leasing/hire-purchase offers. Sales are exclusively to commercial businesses. Delivery / Consulting / Sales only in Germany / Austria / Switzerland Machine dimensions approx.: Width: 800mm Height: 1800mm Depth: 1000mm Weight: approx. 150kg

Condition: good (used), Sensor, write head, read head, read/write head -Manufacturer: Turck Blident, read/write head Iisdpfjgpri Tsx Abnof -Type: TNLR-Q80L400-H1147 -Voltage: 24 VDC -Dimensions: 415/80/H25 mm -Weight: 1.1 kg

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 23003018 503, year of last overhaul: 2026, Strapack SQ800 automatic strapping machine, large arch design, arch dimensions 1850 x 500 mm, 12 mm strapping, automatic strapping feeding and ejection, electronic tension adjustment via potentiometer, approximately 40 cycles per minute, automatic lubrication system, adjustable table height, cycle start via button or foot pedal, year 2023, new condition. Video available upon request. Iiedpezidbhsfx Abnjf

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, Hydraulic press brake LVD PPEB-EQ 80/25 CADMAN CNC Year of manufacture: 2006 Iijdpfoy Avnpjx Abnjf Serial number: 30734 Technical specifications Pressing force: 800 kN Working length: 2,500 mm Distance between uprights: 2,050 mm Stroke: 200 mm Distance table – ram: 400 mm Gap: 400 mm Table width: 150 mm Approach speed: 130 mm/s Working speed: 11 mm/s Return speed: 115 mm/s Weight: 6,200 kg Motor: 7.5 kW Control CADMAN CNC, 6 axes • Back gauge X-mono-R-Z1-Z2 • LVD style upper tool

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 12,796 h, load capacity: 6,000 kg, lifting height: 4,000 mm, free lift: 2,050 mm, fuel type: diesel, mast type: duplex, construction height: 2,950 mm, fork carriage width: 1,460 mm, fork length: 1,600 mm, empty load weight: 9,890 kg, total length: 5,000 mm, drive type: Diesel, construction width: 2,440 mm, Sideloader Load center of gravity: 800 Fork width: 180 mm Fork thickness: 60 mm Mast type: Duplex Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Pneumatic Front tires size: 3.00-15 Rear tires type: Pneumatic Rear tires size: 3.00-15 Description: In addition to this Bulmor model, we also have approximately 200 heavy-duty forklifts, compact forklifts, forklifts, and sideloaders in our warehouse in Hamburg and Gdansk. Visit our website - sago-online. Hire purchase and financing at favorable conditions are always available. We are also happy to purchase your used vehicle on an over-the-counter basis, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this DFQ 60/16/40ZS. P.S.: Our forklift workshop specializes in repairs, maintenance, overhauls, and custom construction for forklifts weighing 8 tons and above. We would also be happy to display your vehicle for consignment sale. Iedpfx Abev U Ezdjneif NIVO fork Heating, full cab, full free lift, Platform height: 1050 mm

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 11,010 h, load capacity: 6,000 kg, lifting height: 4,500 mm, fuel type: diesel, mast type: simplex, construction height: 3,050 mm, fork carriage width: 1,460 mm, fork length: 1,400 mm, empty load weight: 9,690 kg, total length: 4,950 mm, drive type: Diesel, construction width: 2,230 mm, Sideloader Load center of gravity: 700 Fork width: 180 mm Fork thickness: 60 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Superelastic Front tires size: 3.00-15 Rear tires type: Superelastic Rear tires size: 3.00-15 Description: In addition to this Jumbo model, we also have approximately 200 heavy-duty forklifts, compact forklifts, forklifts, and sideloaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Hire purchase and financing at favorable conditions are always available. We are also happy to purchase your used vehicle on an over-the-counter basis, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this JDQ 60/14/45. P.S.: Our forklift workshop specializes in repairs, maintenance, overhauls, and custom construction for forklifts weighing 8 tons and above. We would be happy to display your vehicle for consignment sale. Heating, full cab, Iodov U Ey Hepfx Abnjif Platform height: 1050 mm

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 9,183 h, load capacity: 6,000 kg, lifting height: 7,000 mm, free lift: 2,320 mm, fuel type: diesel, mast type: triplex, construction height: 3,320 mm, fork carriage width: 1,460 mm, fork length: 1,400 mm, empty load weight: 9,690 kg, total length: 5,100 mm, drive type: Diesel, construction width: 2,230 mm, opening width: 2,147,483,647 mm, Side loader Load centre of gravity: 700 Fork width: 180 mm Fork thickness: 60 mm Iedpsu Dy Rijfx Abnsif Mast type: Triplex Condition: Ready for use and fully functional Technical condition: very good Front tires type: Superelastic Front tires size: 3.00-15 Rear tires type: Superelastic Rear tires size: 3.00-15 Description: In addition to this Bulmor model, we have around 200 heavy-duty forklifts, compact forklifts, forklifts & side loaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are always possible for us. We are also happy to buy your used vehicle freely, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this JDQ60/14/70T P.S.: Our forklift master workshop specializes in repairs, maintenance, overhauls and special construction for forklifts from 8 tons. We would also be happy to exhibit your vehicle for commission sale. Heating, full cabin, full free lift, Platform height: 960 mm

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: JUN4607, Year of construction: 2006, operating hours: 8,835 h, load capacity: 6,000 kg, lifting height: 4,000 mm, fuel type: diesel, empty load weight: 9,160 kg, TECHNICAL DETAILS Load capacity: 6,000 kg Lifting height: 4,000 mm MACHINE DETAILS Iedpfx Abozdqv Ienoif Unladen weight: 9,160 kg Fuel type: Diesel Engine power: 61.5 kW at 2,200 rpm Operating hours: 8,835 h

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 7,586 h, load capacity: 6,000 kg, lifting height: 7,500 mm, fuel type: diesel, mast type: triplex, construction height: 3,400 mm, fork carriage width: 1,460 mm, fork length: 1,400 mm, total length: 5,120 mm, drive type: Diesel, construction width: 2,200 mm, Sideloader Load center: 700 Fork width: 200 mm Fork thickness: 60 mm Iijdewmtl Tjpfx Abnof Mast type: Triplex Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Superelastic Front tires size: 3.00-15 Rear tires type: Superelastic Rear tires size: 3.00-15 Heating, full cab, full free lift, Platform height: 1030 mm

Condition: used, Year of construction: 2017, operating hours: 13,000 h, Condition: very good. Iedpezb Sgwofx Abneif Equipment: quick-change system OQ 80.

Year of construction: 2001, condition: used, 800 kVA transformer substation, year of manufacture 2001, 10/0.4 kV, oil-filled transformer, manufacturer: ELIN, OS/US porcelain bushings. Iijdsza Urmspfx Abnjf

Condition: used, For inquiries regarding the attachment, please contact Mr. Herden (by phone at any time). Holp Profile Bucket / PL.120.150 / OQ60-5 / 1,500 mm cutting width / HARDOX / NEW / in stock & immediately available Price: €3,605.00 net / €4,289.95 gross - Excavators up to: 12 tons - Own weight approx.: 450 kg - SAE capacity: 540 liters - Cutting width: 1,500 mm - Back width: 900 mm - Bucket made entirely of HARDOX (not just the cutting edge) Advantages of the Holp Profile Bucket: - No damage when rotating the bucket due to the beveled corners - Optimal design through numerous edges - Stable substructure - Minimal weight due to optimized design - Perfect material flow in the bucket - Advanced bucket bottom for optimal filling - Stable cutting edge made of Hardox 450 When precision is required, the profile bucket delivers the right result in a single workflow: No other bucket models and profiles more precisely and provides comparable efficiency in the processing of your orders than this specially designed bucket. Isdsy T Uvaopfx Abnjif We have a very large selection of various Holp products in our warehouse, which are immediately available! Please contact us for this at / . If desired, we will also gladly provide you with a financing offer. We are an official Holp sales and service partner. We are an official Magni telescopic handler sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Westtech sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Holp range for you! Errors and prior sale excepted! = Further information = New: Yes Intended use: Construction Unladen weight: 450 kg Please contact Marius Herden for further information.

Condition: used, functionality: fully functional, Year of construction: 2017, load capacity: 6,000 kg, lifting height: 5,000 mm, fuel type: diesel, mast type: duplex, construction height: 3,440 mm, fork length: 1,200 mm, drive type: Diesel, Side loader Mast type: Duplex Isdpfx Abjy T S H Asnoif Condition: Ready for operation and fully functional Technical condition: good

Condition: like new (used), Year of construction: 2018, operating hours: 900 h, Lectra IQ80 cutting machine, year 2018, max cutting thickness 8 cm, working width 180 cm, 900 operating hours. Machine in excellent condition. Ijdpfx Abjycqctjneif

Year of construction: 2022, condition: ready for operation (used), I am offering a Shimadzu GC MS, TQ8040 NX, Nexis GC-2030 gas chromatograph in perfect condition. Gas chromatography/triple quadrupole mass spectrometry (GC/MS) Due to the sensitivity of the device, on-site disassembly and personal pickup are required. Iiedpfx Aboy Tmlysnof Please check out my other listings, where you will find many more devices from a closed laboratory.