Used Sen Combi Re for sale (13,306)

Condition: used, Year of construction: 1991, Bottle filler, manufacturer SEN, type Combi-RE H2, with 30 filling stations and 6-digit crowner, set up for 0.5 l + 0.33 l NRW Longneck + 0.5 l EURO bottles, running direction: left to right, discharge table, various spare parts, S5 control, incl. operating manual, year of manufacture 1991, already dismantled. Gkodpfxoyzhmuj Akyoc

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total length: 69,000 mm, total width: 16,000 mm, total height: 16,000 mm, The system was designed according to Eurocode EN 1993 for the industrial drying of wood chips, sawdust, or similar biomass products and is suitable for use in biomass, wood, or pellet production. Process components: Air heater, deflection rollers, feed modules, discharge modules, trough chain conveyor, belt tensioning and adjustment device, 7 exhaust stacks (height up to approx. 17.6 m) Designed for hot air or waste heat utilization (e.g., biomass boiler or CHP plant), heat requirement 10,270 kW th, installed electrical power 690 kW el. The inlet temperature in the dryer is 68°C, the outlet temperature is 42°C, and the heat transfer medium is a water/glycol mixture. The volume flow at the dryer outlet is 1,081,000 m³/h. Dust emission value 5 mg/Nm³ (moist), sound pressure at a distance of 1 m 85 dB(A) from the opening of the exhaust duct and the dryer. The dryer is designed for an outside temperature down to -40°C, the conveying capacity is at least 70 m³/h and a maximum of 250 m³/h with a bulk density of 260 kg/m³. Godpfxezw Apgs Akyjkc The working platform of the dryer is located on approximately 8.00 m high steel supports and is enclosed with thermally insulating sandwich panels. A hall or other production components can be inserted under and between the supports (see under Documents, Steel Structure). The system has been disassembled and stored by an experienced assembly team, and this team can be arranged for transport and reassembly. Please note: We are selling exclusively this belt dryer and no other parts! Please direct your inquiries via WhatsApp to Mr. Sörgel; he is on-site at the factory and may not always be available by phone. Thank you very much!

Condition: used, Year of construction: 2005, operating hours: 1,500 h, functionality: fully functional, machine/vehicle number: 10910806050010, tank capacity: 350 l, usable tank capacity: 300 l, total length: 1,560 mm, total width: 1,560 mm, total height: 1,100 mm, inner diameter: 300 mm, outer diameter: 450 mm, overall weight: 410 kg, wall material: stainless steel, wall thickness: 12 mm, wall structure: double-walled, manhole location: top, reception height: 600 mm, discharge height: 600 mm, operating temperature: 120 °C, operating pressure: 1 bar, input voltage: 400 V, input current: 80 A, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, emergency stop, The Metos Viking Combi 300E is a high-performance, Finnish-made heavy-duty industrial mixing and cooking kettle. The primary physical, structural, and technical documentation outlines the exact specifications for this 300-liter model: 📐 Dimensions & Clearance: Width: 1,560 mm Depth: 1,100 mm (varies up to 1,165 mm depending on the specific safety lid protrusion). Height: 900 mm to the kettle lip / 1,535 mm total height including the elevated control pillar. Tilting Discharge Height: 600 mm clearance from the floor when tilted. ⚖️ Weight: Net Weight (Empty): 410 kg (Standard 4G model) / Up to 414 kg depending on the configuration of structural sub-surface installation frames. Gjdpszzxyiofx Akyjkc Shipping Weight: Approx. 545 kg packed. ⚡ Electrical & Heating Power Voltage Requirement: 400/230 V, 3NPE, 50/60 Hz Total Power Consumption: 43.6 kW Amperage/Fuse Size: 80 A Heating System: Steam-jacketed indirect electrical system (maximum working pressure of 1.0 bar, yielding up to +120°C inside the jacket). 🚰 Utility Connections: Cold Water (CW): R½" (Ø15 mm) connection. Hot Water (HW): R½" (Ø15 mm) connection. Connection Heights: Water inlets enter at roughly 270 mm from the floor; the main power cable input gland enters at 510 mm. ⚙️ Operational Features: Integrated Mixer: Stepless variable mixing speeds from 20 to 110 RPM with an auto-reverse program and structural scrapers. Tilting: Smooth, heavy-duty electrical motor-driven tilting mechanism.

Condition: used, Year of construction: 2017, feed pressure / bar Gedpfxsxy S H To Akyokc liter capacity / l Air consumption / m³/h

Condition: used, Year of construction: 1972, functionality: fully functional, machine/vehicle number: 289, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 810 mm, feed rate X-axis: 1,100 m/min, feed rate Y-axis: 1,100 m/min, spindle speed (max.): 2,800 rpm, spindle speed (min.): 45 rpm, spindle mount: MK 4, total height: 2,245 mm, total width: 2,470 mm, table width: 700 mm, table length: 1,200 mm, type of input current: three-phase, rotational speed (max.): 2,800 rpm, rotational speed (min.): 45 rpm, table load: 1,500 kg, overall weight: 3,700 kg, input voltage: 400 V, workpiece weight (max.): 1,500 kg, distance table to spindle center: 775 mm, input current: 16 A, input frequency: 50 Hz, Equipment: documentation/manual, Universal vertical boring and milling machine BoKö MF1, from a model-making workshop. In good, fully functional condition. Primarily used for processing plastics. Gkjdpfx Aksz Ehbueysc Rotary table for workpieces with a diameter of up to 1900 mm. Retrofitted 3-axis digital display. All original documents since purchase are available: scope of delivery, circuit diagrams, technical drawings, brochures, price lists, etc.

Condition: good (used), Manufacturer: Ringoplast ✓ Model: Backgut Combi / tilting trays, 2,500 pieces Gjdpfx Akoyy Ix Ijyskc

Condition: used, Year of construction: 1992, functionality: fully functional, power: 2,500 kW (3,399.05 HP), input voltage: 380 V, input current: 53 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 250 t, table length: 4,050 mm, year of last overhaul: 2007, Equipment: documentation/manual, We are offering this used Eisen u. Hammerwerk GmbH - EHT EHPS 25-40 press brake (hydraulic press brake, die bending press) for sale. Available immediately. Ready for operation. For sale due to new acquisition. Specifications: - 250 t pressing force - Cybelec DNC880S CNC control with Windows operating system (retrofitted in 2007) Gkjdpfx Asy D Sy Rjkysc - Foot pedal control - Various upper tools in different lengths (segmented) - Lower tool (reversible die) in various lengths (segmented) - Hydraulic tool clamping - Support table for bent parts Technical data: - Machine type: EHPS 25-40 - Force: 2500 kN - Year of manufacture: 1992 - Working length: 4050 mm - Serial number: 207380 - Power supply: 3~ - Frequency: 50 Hz - Operating voltage: 380 V - Control voltage: 24/220 V - Rated current: 53 A - Main fuse rated current: 80 A - Circuit diagram number: 209-178/372 If you have any questions or require more information, feel free to send us a message or give us a call. Machine location at our premises: Pavic Fahrzeugtechnik Homberg GmbH Poschweg 2 34576 Homberg Relbehausen Germany This is a non-binding offer. Subject to prior sale, errors and changes excepted.

Condition: used, Year of construction: 2008, Roll production line König Classic Rex Combiline 800 This system is currently being refurbished (the photos are from the bakery). Suitable for the production of round, oval, and stamped rolls, as well as other dimpled rolls. Year of construction: 2008 Dough divider and rounder, type: Classic Rex T6 Proving cabinet, type: Combiline 800 Weight range: 45–100 g (stamp size: SK 61) Capacity: max. 9,000 pieces/h Pre-rolling for oval products before feeding into the proving cabinet Proving cabinet with climate control (temperature, humidity) Side discharge conveyor for subsequent production (e.g., downstream wrapping machine) Stamping station including 2 stamping dies (Kaiser and salted rolls) Deposition machine for baking trays up to a maximum length of 100 cm. Gsdpfx Aez A Slfekyokc

Condition: good (used), mileage: 928,978 km, power: 480 kW (652.62 HP), first registration: 01/2007, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: engine braking, color: blue, gearing type: mechanical, Year of construction: 2007, operating hours: 9,410 h, Equipment: ABS, electric window regulation, fog lights, power mirror, trailer coupling, - Brake booster - Low noise - Air-suspended seats - Air horn - Rotating beacon - Sun visor - Toolbox - Power take-off (PTO) Axle configuration Front axle 1: Steerable Front axle 2: Steerable Weights GVWR: 27,000 kg Functional Mast: Telescopic (12 sections) Mast length: 30 m Lifting capacity: 25,000 kg Crane manufacturer: PALFINGER PK 85002 E + PJ 170 + LIER CE marking: yes Condition Technical condition: good Optical condition: good DAF XF 480 8x4 semi-trailer tractor / flatbed truck Palfinger PK 85002 E + PJ 170 E JIB – 12-section hydraulic – approx. 34 m working height We offer you a very well-equipped DAF XF 480 8x4, designed as a multi-functional semi-trailer tractor / flatbed truck, with a heavy Palfinger PK 85002 E loading crane including Palfinger PJ 170 E JIB, mounted directly behind the cab. Due to the combination of a heavy loading crane, JIB, winch, sliding fifth wheel, trailer coupling, and ballast platform, this vehicle is ideally suited for heavy-duty crane operations, transport of machinery and construction equipment, assembly work, and special transports. VEHICLE DATA Make / Model: DAF XF 480 Drive: 8x4 Design: Semi-trailer tractor / flatbed truck First registration: 01/17/2007 Mileage: 928,978 km CAB & EQUIPMENT * DAF XF SpaceCab * Air conditioning * Auxiliary heater * Manual transmission * Spacious SpaceCab * Sliding fifth wheel * Trailer coupling * Multi-functional design as semi-trailer tractor / flatbed truck * Ballast platform * Extensive stainless steel / V2A equipment * Various stainless steel tool and storage boxes PALFINGER LOADING CRANE Manufacturer / Model: Palfinger PK 85002 E JIB: Palfinger PJ 170 E Mounting: Behind the cab Crane operating hours: 9,410 hours The crane is very extensively equipped with: * Palfinger PJ 170 E hydraulic JIB * Main boom + JIB with a total of 12 sections * Radio remote control * Hydraulic winch * Additional oil cooler for the crane hydraulics * Additional hydraulic function on the JIB * Complete hydraulic system CRANE PERFORMANCE Maximum lifting capacity: approx. 25,000 kg Gkodpfxozxglus Akyec Maximum working height: approx. 34 meters Maximum boom / mast length: approx. 30 meters Through the combination of the heavy Palfinger PK 85002 E main crane with the Palfinger PJ 170 E JIB, this vehicle has a very large working area. The crane configuration with a total of 12 sections makes this vehicle particularly interesting for work where a large reach and working height are required. MULTI-FUNCTIONAL DESIGN A particular advantage of this DAF is its versatile configuration. The vehicle can be used as a semi-trailer tractor and has a sliding fifth wheel for this purpose. In addition, the vehicle is offered with a ballast platform, making it ideal for heavy crane work and special transports. A trailer coupling is also available and...

Year of construction: 2011, condition: ready for operation (used), Offered for sale is an Esab CNC plasma cutting machine. Track gauge: 3000mm, max. cutting width: approx. 2500mm, max. positioning speed: approx. 25m/min, cutting process: plasma, control: Esab CNC control. Machine dimensions X/Y/Z: approx. 4425mm/1676mm/1930mm. Inspection by appointment possible. Gsdszrzpnjpfx Akyskc

Year of construction: 2008, condition: ready for operation (used), - USED - SCREW COMPRESSOR WITH INVERTER    POWER: 11 kW MAX PRESSURE: 12,5 Bar WEIGHT: 271 Kg OVERALL DIMENSIONS: 960 x 615 x 1050 mm Gksdezqwggepfx Akysc

Condition: used, Year of construction: 2006, functionality: fully functional, Modular and scalable design Probable working width 600 mm Electrical supply 400 V Rated current 16 A Frequency 50 Hz – to be confirmed Output up to 7,500 pieces/hour Programmable control with touchscreen 50 memorizable programs Rex head according to configuration Weight range 35 to 85 g with Basic Rex Weight range 50 to 110 g with Basic Rex Pre-lamination before fermentation Resting pre-fermenter Optional pre-fermenter air conditioning Interchangeable stamping station Optional longitudinal cutting station RR forming station according to configuration WK-RR forming station according to configuration Seeding unit according to configuration Automatic depositing onto trays or belts Drive power 3.5 to 5.3 kW Fermenter air conditioning 4.4 kW Fermenter water 15 l/h maximum at 2 bar Seeding water 40 l/h at 2 bar Maximum height approximately 2,640 mm Used industrial line for rolls – König Combi Line The used König Combi Line is a modular line designed to automate the dividing, rounding, resting, shaping, and depositing of rolls. Its scalable design allows different modules to be combined according to the desired products, required output, and organization of the bakery. The nameplate identifies this equipment as a Combi Line manufactured by König Maschinen Kft. The visible machine number is 06.6.0070. The beginning of the configuration code appears to correspond to a 600 mm width version, but the complete composition of the line must be confirmed by an inventory of the modules present. Why this line stands out The Combi Line is based on a modular architecture, allowing the production of numerous formats from a single installation. Depending on its configuration, it can integrate a Rex dividing-rounding head, pre-lamination, a pre-fermenter, a stamping station, a forming station, a seeding unit, and an automatic depositing unit. This modularity facilitates the adaptation of the line to changes in production. Additional equipment can be added later without replacing the entire installation. Gkodpezp H Epsfx Akyec Key advantages Modular and scalable design Automated production of many types of rolls Output of up to 9,000 pieces per hour Gentle dough handling with Rex heads Memorizable settings for different productions Quick tool changes for stamping Automatic depositing onto trays, belts, or boards Wide choice of shaping and finishing modules Seed recovery, limiting waste Easy access for cleaning and maintenance Products achievable depending on the configuration The Combi Line range allows the production of round, oval, flattened, laminated, stamped, cut, rolled, or seeded dough pieces. It is particularly suitable for hamburger buns, hot dog buns, milk bread rolls, Kaiser rolls, Kornspitz, decorated rolls, donuts, bocadillos, and long products such as half-baguettes. It can process wheat doughs, mixed doughs, cereal doughs, and various leavened doughs, provided they are compatible with the dividing head and installed tools.

Condition: used, Year of construction: 2012, operating hours: 2,795 h, functionality: fully functional, machine/vehicle number: 21214714, type of input current: three-phase, sheet thickness (max.): 40 mm, sheet thickness steel (max.): 150 mm, sheet thickness aluminum (max.): 40 mm, input voltage: 230 V, cutting speed: 2,000 mm/min, table height: 700 mm, workpiece weight (max.): 30,000 kg, table length: 12,950 mm, table width: 2,700 mm, input frequency: 50 Hz, Equipment: documentation/manual, We offer this used ESAB COMBIREX DX 3500 gas and plasma cutting machine, manufactured in 2012. Type: COMBIREX DX 3500 Machine No.: 21214714 Year of Manufacture: 2012 Gkedpfx Ajzc Hn Eokysc If you have any questions or require further information, please contact us by email or phone.

Condition: used, Year of construction: 2008, Roll production line König Basic Rex II Combiline 600 Year of manufacture: 2008 Condition: Currently undergoing maintenance; photos taken before maintenance For the production of round, oval, stamped, oblong, and flat products made from wheat dough, mixed wheat dough, cereal dough, or fine yeast dough Suitable for shaped rolls, oblong rolls, etc. Working width: 600 mm Max. hourly output: 7,500 pieces (5 rows) Max. hourly output: 4,500 pieces (3 rows, for oblong dough products) Weight range: 35–85 g Dough divider and rounder, type Basic Rex II, 5 rows Long-working board before the proofing cabinet Proofing cabinet with climate control Stamping station with reversible cups for stamping round and oblong products Forming station with 2 pressure rollers and a driven upper belt Depositor for 60 x 80 cm or 60 x 100 cm baking trays and boards Manual removal of baking trays Includes stamping tools for Kaiser rolls, Housky rolls, and oblong dough rolls Includes dough divider block for 5- and 3-row operation Gedpfxjz A Ryno Akyjkc

Condition: ready for operation (used), Year of construction: 1997, travel distance X-axis: 6,000 mm, controller manufacturer: ESAB, controller model: Vision 51, number of axes: 4, This 4-axis ESAB Combirex CXD P 3500 was manufactured in 1997. It features a cutting current of 100 A and is capable of handling a maximum recommended cutting thickness of 31.8 mm for mild steel and stainless steel, and 25.4 mm for aluminum. If you are looking to get high-quality plasma cutting capabilities, consider the ESAB Combirex CXD P 3500 machine we have for sale. Contact us for further details. • Cutting table: 2,000 x 6,000 mm with sectional extraction • Track length: 8,000 mm • Track gauge: 3,500 mm • Three oxyfuel torches with capacitive height sensing • One torch carriage designed as an interchangeable system for plasma torch mounting • Supply voltage: 230 V • Apparant power: 4.0 kVA Gsdpfx Aozc Rmfjkyekc • Frequency: 50 Hz • Power source: Hypertherm Powermax 1650 • Torch type: T100M • Cutting current: 100 A • Torch-to-work distance: 3.2 mm • Maximum recommended cutting thickness (Mild Steel): 31.8 mm • Maximum recommended cutting thickness (Stainless Steel): 31.8 mm • Maximum recommended cutting thickness (Aluminium): 25.4 mm • Machine retrofitted in 2008: New Hypertherm Powermax 1650 plasma source (up to 25 mm steel) including torchNew Vision 51 control system • Conversion to dual-sided X-axis drive • Optional: Rotoclean RC-S80 extraction system • Automatic filter cleaning • Optional: various spare parts for oxyfuel and plasma operation availableOxyfuel cutting has not been used for a long time and may require maintenance

Condition: used, Vacuum drum filter 6m² Gjdsz Ri Smspfx Akyjkc

Year of construction: 1988, condition: used, Olma Combi Door Panel Line (1988), Panel Dimension Length Min/Max 330/1320 x 538mm Width, Cycle Time 17 Seconds, Dimension of Sheet Min/Max Length 390/1400mm x 600 Width x 0.5mm Thickness Gjdoz I Szqopfx Akyokc Location: These lots are located in Susegana, Treviso, Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: good (used), Year of construction: 1992, For sale is a fully functional, robust agricultural drying line that was recently used successfully for the efficient drying of sawdust. The system is ideally suited for sawmills, pellet and biomass producers, or agricultural service providers. Versatile application: Optimized for sawdust and wood flour, also suitable for straw, grain legumes, or specialty crops. Reliable technology: Solid machine construction quality, designed for continuous operation and high throughput. Gkodoz I Efpopfx Akyec Energy-efficient: Well-designed airflow for optimized heat consumption. Condition & availability: The system is in well-maintained, operational condition and can be inspected while powered on after prior arrangement.

Condition: used, axle configuration: 1 axle, first registration: 06/1995, wheelbase: 5,120 mm, color: other, Year of construction: 1995, Number of axles: 1, Payload: 780 kg, Tare weight: 2720 kg, Gross vehicle weight: 3500 kg, Chassis type: Complete chassis, Combination 330108 Gedpfx Akjzxxlasyekc = Further information = General information Cab: Day cab Registration number: OD-86-ZR Technical information Fuel type: Diesel Transmission: Manual gearbox Weights Unladen weight: 2,720 kg Payload: 780 kg GVW: 3,500 kg Environment Emission class: Euro 0 Condition Overall condition: very poor Technical condition: very poor Optical condition: very poor Damage: none = Company information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? It's simple! • Large and rapidly changing stock • Recognizable quality • A good price • Fair business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration can be arranged quickly • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Ask directly about our European warranty package.

Condition: excellent (used), mileage: 307,763 km, power: 353 kW (479.95 HP), first registration: 01/2012, fuel type: diesel, wheelbase: 4,700 mm, fuel: diesel, fuel tank capacity: 500 l, color: green, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro5, total length: 10,250 mm, total width: 2,550 mm, total height: 3,900 mm, loading space volume: 14 m³, Year of construction: 2012, = Further Options and Accessories = - PTO (Power Take-Off) = Further Information = Number of cylinders: 6 Engine displacement: 12,740 cc Unladen weight: 20,100 kg Payload: 16,900 kg Gross vehicle weight (GVW): 37,000 kg Body manufacturer: HOLZMANN FAHRZEUGBAU GMBH KOMBI TYPE III WRG Gsdsyl Twxopfx Akyskc Technical condition: very good Visual condition: very good SCANIA GA 480 8x2 HOLZMANN suction/flushing combination with water recycling EURO 5 L PACKAGE 8x2 drive, last axle hydraulically liftable and steering Wheelbase: 470 cm Air suspension Weight variant: 37,000 kg CR 19 cab with air conditioning and auxiliary heating HOLZMANN Type III suction/flushing combination with water recycling Total tank capacity: 14,100 l Divided into 3 chambers: Chamber 1: 2,300 l Chamber 2: 3,100 l Chamber 3: 8,700 l Suction arm hydraulically pivotable and telescopic HD Hutchinson NW25/200 180-support cover screw meter HD213 NW13/250 bar hose reel, 80 meters Suction hose, 8 meters, NW 125 box hose Vacuum pump Vacustar type WR 3100 R Delivery rate: 3,100 m³/h at 400 mbar 94 kW

Condition: used, Year of construction: 2017, CNC gantry plasma cutting machine (bevel cutting unit) Manufacturer: Zinser Type: 2425-I/3600 Year of manufacture: 2017 CNC control: 5010 Travel length: 11 m Oxy-fuel cutting table with oscillating conveyor system, including dust extraction system Dimensions: 2,000 x 8,000 mm 1 plasma torch with Hypertherm XPR300 power source Automatic gas control panel Includes automatically rotating plasma bevel cutting unit Bevel System 2015/350 Downflow filter system 3DFP9-SP Power: 9 kW Laser diode Gksdow Rpvbjpfx Akyec 121026ä

Condition: good (used), Year of construction: 1999, machine/vehicle number: 490880699, ELB CNC-controlled profile grinding machine, type Perfect Future BD10 Unicon, 4 axes Used, well-maintained 4-axis CNC profile and surface grinding machine Gsdpfxeiwa S To Akyjkc Siemens control system Grinding length 1000 mm Grinding width 600 mm Grinding height 600 mm Grinding wheel dimensions 400 x 100 x 127 mm 4th axis Universal paper band filter system with permanent magnetic pre-filter Coolant unit Various grinding wheels

Condition: used, System: Tricanter, 3-phase decanter, three-phase centrifuge Flottweg Z4D-4/441, used Year of manufacture: 1998 Bowl diameter: approx. 420 mm Max. rotational speed: 3500 rpm Sediment density: 1.8 kg/dm³ Application: This powerful Flottweg three-phase decanter centrifuge is specifically designed for the continuous separation of solids and two liquid phases. Compared to standard decanters, this system offers significantly enhanced process capabilities, particularly when handling complex media. System: Complete skid-mounted unit Equipment: Flottweg three-phase decanter - electric drive unit - pump system - piping & valves Gjdpfx Akey Eyf Doyskc - maintenance platform - complete skid assembly Typical applications: Oil/water separation - food industry (e.g. vegetable oils) - chemical industry - recycling & environmental technology - emulsion and sludge treatment

Year of construction: 2024, condition: good (used), functionality: fully functional, We are offering this well-maintained em machines Liquid Mate Sense Premium monitoring and control system for cutting fluids, manufactured in 2024, featuring a completely new set of sensors. Manufacturer: em machines Model: Liquid Mate Sense Premium Year of manufacture: 2024 Condition: good Category ID: 661 Gjdpezm Hahjfx Akyskc Type: Monitoring and control of cutting fluids The LiquidMate Sense Premium is an innovative, standalone plug-and-play solution for fully automated monitoring and control of cutting fluids in individual machines and central systems. It precisely measures concentration, pH value, and temperature, monitors the fill level, and actively regulates the cutting fluid. A major advantage is the circulation monitoring, which ensures regular movement of the cutting fluid and prevents bacterial growth and fungal contamination. The solution is low-maintenance, easy to install, and offers versatile connectivity, including an integrated online dashboard for convenient remote monitoring. LiquidMate is CE and UKCA certified and works with all common cutting fluids, contributing to environmentally friendly and cost-effective operation. If you have any questions or require further information, please send us a message or call us. We have 11 of these units available, and the machines can also be inspected. We can also offer them as a package.

Condition: used, mileage: 893,000 km, power: 368 kW (500.34 HP), first registration: 06/2022, fuel type: diesel, overall weight: 28,000 kg, axle configuration: 3 axles, brakes: retarder, gearing type: automatic, emission class: euro6, total width: 2,600 mm, total height: 3,990 mm, loading space length: 8,150 mm, loading space width: 2,500 mm, loading space height: 2,750 mm, Year of construction: 2022, Equipment: ABS, air conditioning, navigation system, soot filter, tail-lift, Information in English: SCANIA 500S 6X2 CARRIER TRS ICELAND 815 x 250 x 275 CM INTERNAL TAIL LIFT Box: Refrigerated / Freezer / Flower Frigo Martini Ebo Rhoon 2022 Tail lift: 2,000 kg Dhollandia Refrigeration: TRS Carrier Iceland, temperature range from -25°C to +30°C First registration: 06/2022 APK (MOT): 06/2026 Mileage: 893,000 km Engine Power: 358 kW (500 HP) Transmission: Automatic Internal dimensions (L x W x H): 815 x 250 x 275 cm Kerb weight: 13,765 kg Payload: 14,235 kg GVW: 28,000 kg GCW: 50,000 kg Colour: White, original paint Suspension: Front leaf springs, axles 2 and 3 with air suspension Emission standard: Euro 6 Axle configuration: 6x2 Tyres front: 385/65 R22.5 L50% R50% Tyres axle 2: 295/80 R22.5 L50% R50% Tyres axle 3: 385/65 R22.5 L50% R50% Cab type: S Highline Features: RETARDER, automatic transmission, parking heater, refrigeration, adaptive cruise control, 2 beds, radio/CD player, TRS Carrier Iceland fridge with temperature control between -30°C and +30°C, 1,490-litre diesel tank, fully insulated body built in 2022, 5 stainless steel load lock rails integrated into floor and ceiling including 5 bars, 1 horizontal load lock rail, extensive extra lighting, fully pneumatic Rockinger trailer coupling, lifting axle, ABS, EBS, complete service history, direct from first owner, immediately available, ready for operation, box volume suitable for 26 CC (Danish trolleys), 16 standard pallets or 20 Euro pallets, etc. Optionally available with matching trailer: 2-AXLE DRACO FRIGO TRAILER CARRIER TRS ICELAND 24 CC TAIL LIFT (2021) Box: Refrigerated / Freezer / Flower Frigo Martini Ebo Rhoon Chassis: Draco MZS 218 Refrigeration: Carrier TRS Iceland First registration: - APK (MOT): until 2026 FRC ATP: No Internal dimensions (L x W x H): 750 x 250 x 290 cm Adjustable drawbar length: 40 cm Unladen weight: 6,040 kg Payload: 11,960 kg GVW: 18,000 kg Tail lift: Dhollandia 2,000 kg Suspension: Air suspension Axles: SAF axles with disc brakes Tyre size: 445/45 R19.5 Tyre profile axle 1: L40% R40% Tyre profile axle 2: L40% R40% Gkedjyqivuopfx Akyoc Spare wheel: trailer 445/45 30% Features: Length-adjustable drawbar (40 cm), Carrier TRS Iceland refrigeration, Dhollandia 2,000 kg tail lift, ABS, EBS, SAF disc brake axles, 2 toolboxes, fully insulated body by Martini, 5 stainless steel load lock rails in floor and ceiling, 1 horizontal load lock rail, rear doors, rear bumper, ferry connections, 2 spare wheels, complete service history, immediately available and ready for use, box size allows for 24 CC (Danish trolleys), 14 standard pallets or 18 Euro pallets, etc. TOP CONDITION COMBINATION, IMMEDIATELY READY FOR WORK 3 SCANIAS AND 2 DAFS READY FOR DELIVERY ADDITIONAL TRAILERS AVAILABLE, ALL TO ABOVE SPECIFICATIONS, ONLY DIFFERENT MODEL YEARS: - 2017 - 2018 - 2019 - 2020 - 2021 - 2022 PLEASE CONTACT OUR SALES DEPARTMENT FOR MORE DETAILS Further information: * Payload: 14,235 kg * Tyre size | First axle: 385/65 R22.5 * Tyre tread depth inner left | First axle: 50% * Tyre tread depth inner right | First axle: 50% * Max axle load | First axle: 9,000 kg * Tyre size | Second axle: 295/80 R22.5 * Tyre size | Third axle: 385/65 R22.5 * Tyre tread depth outer left | Second axle: 50% * Tyre tread depth inner left | Second axle: 50% * Tyre tread depth inner left | Third axle: 50% * Tyre tread depth outer right | Second axle: 50%