Used Selco Wnt 750 for sale (4,044)

Condition: used, machine/vehicle number: 007569, Max. panel width: 2200 mm Lredpfx Afjvrrlde Set Max. panel length: 4500 mm Main saw blade projection: 152 mm No of Grippers: 11 Thin sheet loading: yes

Condition: good (used), Year of construction: 2014, functionality: fully functional, System consisting of: PANEL SAW SELCO WNT 610 / 4500 x 2200 mm PC-BASED CONTROL SYSTEM Max. cutting length: 4,500 mm Max. saw blade projection (main saw): 95 mm Max. opening of clamping grippers: 90 mm Min. panel dimensions from rear: 1,830 x 915 mm Max. panel dimensions from rear: 3,100 x 2,200 mm Min. panel thickness for rear feeding: 3 mm Worktable height: 985 mm Main saw motor: 15 kW Main saw blade diameter: 380 mm Scoring saw motor: 2.2 kW Scoring saw blade diameter: 200 mm DIGISET: electronic adjustment of scoring saw to main saw QUICK CHANGE: fast blade change at the push of a button Saw carriage drive: 1 - 140 m/min Integrated side aligner in saw carriage: 0 - 4,200 mm Automatic measuring system for manual cuts Pusher extension from 5,500 to 7,800 mm 10 pneumatic clamping grippers on pusher with double fingers 3 front aligners 16 support roller tracks behind the machine table 4 air-cushion tables in front of the machine table, rounded, including movement device for table 2 Automatic ejection of end pieces beyond the cutting line Material support area under the pusher equipped with brush rollers for sensitive surfaces Machine table with air nozzles for sensitive surfaces Automatic device for monitoring the main saw blade consisting of a sensor that detects blade deflection and a system for measuring main spindle speed Software package: QUICKOPTI for optimizing cutting plans directly on the machine OSI PLUS INTERFACE VERSION OPTIPLANNING OPTIMIZATION SOFTWARE incl. hardware dongle, allows management of up to 10 users via network OS LABELLING: graphical editor on the machine control system with workpiece drawings, real-time label printing directly at the machine possible Lodpfx Asxranpof Ssrt COMMUNICATION BETWEEN STORAGE FEED SYSTEM AND SELCO Industrial label printer at the machine STORAGE FEED SYSTEM RBO WINSTORE 2D STANDARD TRAVERSE 8000 MM Swiveling suction frame 0 - 180 degrees with controlled axis Panel alignment/squareness correction system consisting of 3 photocells mounted on pneumatic cylinders Panel weight detection via load cell mounted on the suction frame in the separation area, checks whether the specified weight value is within the expected range for this panel type. If not, the panel is set down again and the separation cycle restarts. Roller conveyor for stacking and unstacking: 4,200 mm Software: LINE SUPERVISOR with warehouse mapping, catalog, import of machining data from the optimizer, management of BOMs, plant control

Condition: used, Year of construction: 2022, - Work surface: 3800 x 2200 mm with rear lifting table - Maximum cutting length: 3800 mm - Saw blade overhang: 108 mm - Maximum gripper opening: 100 mm - Minimum panel size: 1830 x 915 mm - Maximum panel size: 3660 x 2200 mm - Maximum stack height: 630 mm - Minimum thickness on the lifting table: 10 mm - Maximum lifting table stroke: 985 mm - Load capacity of the lifting table: 5 t Panel dividing saw Manufacturer: Biesse Type: Selco WNT 630 Year of manufacture: 2022 Technical data - Work surface: 3800 x 2200 mm with rear lifting table - Maximum cutting length: 3800 mm - Saw blade overhang: 108 mm Lodpfx Ajzuyl Tjf Ssrt - Maximum gripper opening: 100 mm - Minimum panel size: 1830 x 915 mm - Maximum panel size: 3660 x 2200 mm - Maximum stack height: 630 mm - Minimum thickness on the lifting table: 10 mm - Maximum lifting table stroke: 985 mm - Load capacity of the lifting table: 5 t The machine is almost new and has only been used for a few months. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: ready for operation (used), Year of construction: 2022, This BIESSE Selco WNT 630 panel saw was manufactured in 2022. It features a maximum cutting length of 3800 mm, saw blade projection of 108 mm, and a lift table capacity of 5 tons. Ideal for handling large panels up to 3660 x 2200 mm. If you are looking to get high-quality cutting capabilities, consider the BIESSE Selco WNT 630 machine we have for sale. Contact us for more information. • Working size: 3800 x 2200 mm • Max cutting length: 3800 mm • Saw blade projection: 108 mm • Max gripper opening: 100 mm • Min panel size: 1830 x 915 mm • Max panel size: 3660 x 2200 mm • Max packet height: 630 mm • Condition: Almost new, used only a few months Additional equipment • Back lift table: • Minimum panel thickness on lift table: 10 mm • Maximum lift: 985 mm • Lift table capacity: 5 t Lrsdpfozug E Hsx Af Sot

Condition: used, Year of construction: 2011, - max. panel width 4500 mm - max. panel length 2200 mm - max. saw blade projection 127 mm - main saw 18.5 kW - scoring saw 2.0 kW - with lifting table used panel dividing saw Manufacturer: Selco Type: WNTR 730 Year of manufacture 2011 Technical data: Max. panel width 4500 mm Max. panel length 2200 mm Max. saw blade projection 127 mm with lifting table 9 grippers on the sliding fence Flexible grippers for positioning via NC Max. feed rate 130 m/min 1 saw unit with positioning via NC max. tool diameter 470 mm Motor power 18.5 kW Scoring unit max. blade diameter 200 mm Motor power 2 kW Quick-change device QUICK CHANGE SYSTEM Max. feed rate 185 m/min Machine programming software OSI Barcode label printer Barcode scanner Total installed power 44 kW Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding. Lrsdpjzuyxmsfx Af Sot

Condition: used, Year of construction: 2011, Panel dividing saw Manufacturer: Selco / Systraplan Type: WNTR 710 Year of manufacture: 2011 with SYSTRAPLAN supporting table Technical data Cutting length: 4300 mm Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding. Ljdpfxezuyxye Af Ssrt

Condition: used, machine/vehicle number: 008546, Max. panel width: 2200 mm Max. panel length: 3800 mm Ledpfx Afezq Uras Sort Main saw blade projection: 123 mm No of Grippers: 7

Condition: ready for operation (used), Year of construction: 2002, cutting length (max.): 4,500 mm, This 4-axis BIESSE Selco WNTR 600 was manufactured in 2002. It features a maximum blade projection of 120 mm to 132 mm and cutting lengths of 3,200 mm, 3,800 mm, and 4,500 mm. The machine is equipped with a powerful main saw motor ranging from 13.5 kW to 18 kW and a saw carriage speed of up to 150 m/min. If you are looking to get high-quality panel cutting capabilities, consider the BIESSE Selco WNTR 600 machine we have for sale. Contact us for further details. • Max. blade projection: 120–132 mm • Cutting lengths: 3,200 / 3,800 / 4,500 mm • Main saw motor: 13.5–18 kW • Main saw blade diameter: 430 mm • Scoring saw blade diameter: 200 mm • Saw carriage speed: up to 150 m/min (brushless drives) • Pusher speed: up to 90 m/min Lrsdpfx Afoz Dhmuj Sjt • Pusher grippers: independent pneumatic grippers • Control system: OSI (Open Selco Interface) / OSI Plus numerical control • Machine layout: angular panel sizing system with two orthogonal cutting lines for automatic rip and cross-cutting

Condition: excellent (used), Angular sawing plant Numerical Control OSI Plus - Software Optiplanning N. 2 Pre-loading roller tables (mm) approx. 4500 x 2200 each Lifting table (mm) 4500 x 2200 Lredpfxoukhd As Af Sjt 1° Rear-pusher, with No. 5 clamps/grippers Turning device (rotating unit) at 90° 1° Panel saw (longitudinal) max. cutting width (mm) 4500 Max blade projection (mm) 152 Scoring Unit (max. diameter saw) mm approx. 215 Main Sawing Unit (max. diameter saw / power) mm 530 ( Kw 30) Adjustable speed of the saw carriage (m/min) 1 - 170 m/min Cutter for shredding trimmings 2° Rear-pusher, with No. 10 clamps/grippers 2° Panel Saw - Max cutting width mm 2200 Max blade projection (mm) 152 Scoring Unit (max. diameter saw) mm approx. 215 Main Sawing Unit (max. diameter saw / power) mm 530 (Kw 30) Adjustable speed of the saw carriage (m/min) 1 - 170 m/min No. 2 Front supporting tables with Air blowing system mm 2200 x 1500 Automatic unloader (bridge) for cut panels "RBO (BIESSE)" Mod. Lifter with 6 stacking stations

Condition: used, Year of construction: 2020, functionality: fully functional, total height: 900 mm, total length: 3,000 mm, total width: 1,500 mm, overall weight: 1,028 kg, Siegmund Welding Table Professional 750, Plasma-nitrided Lrodpfxsz Dpwnj Af Set Size: 3000 x 1500 x 150 mm System 22 mm with diagonal grid and scale with base, standard version, 700 mm Only the table is for sale, without any accessories.

Condition: used, Year of construction: 2016, Angular panel saw with automatic pre-loading and twin pusher system for optimised cutting Osi Plus Numerical Control Os Labelling labelling machine with on-board graphic labelling with part drawings Label printing management software Optiplanning Cutting Optimizer Cutting length mm 4500 Cutting width mm 2200 Blade projection 95 mm Motorized rollers for lateral loading on lifting table 4500 x 2200 mm. The translation speed is 10.8 m\min (50hz) - 13.1 m\min (60hz) Automatic recognition of the lost panel (martyr panel) based on the thickness specified in the machine data Low battery stop Automatic side loading buffer. Includes: perimeter nets, double photocell, push-button panel, predisposition electric for the two motorized pre-rollers and the amplification of 4 rollers in place of the fork passages in the pre- intermediate roller conveyor Pre-loading side roller conveyor dim 3800 x 2200 mm with motorized rollers (height from the ground 325 mm) Inertial conveyor for conveying longitudinal trimmings for angular systems 4500 mm (total length 7295 mm) 3000 mm extension to the inertial conveyor to also convey transverse trimmings Long chute for manual conveying of cross-cut trimmings to the centralized inertial conveyor 2050 x 850 mm air curtain discharge table with wheels at the front Air generator up to 6 floors with air curtain MULTIPUSHER 2.4 system with automatic lubrication Additional mobile lateral aligner on the transverse plane. The presence of this device allows to reduce from 1830 to 1220 mm is the minimum length of the panels that must be sent for cross-sectioning. Automatic blade shaft bending detection device for angular systems (longitudinal and transversal) Lrsdpfeuc Idxex Af Sst consisting of a sensor that detects the deflection directly on the blade shaft and a device that detects the revolutions blade directly on the spindle. Remote cycle start button panel Automatic panel loading via rear lifting table Automatic double aligner with pneumatic cylinders Additional movable lateral aligner on the transverse plane Main blade, max diameter mm, KW 15 Scoring blade, max diameter mm, KW 2.2 Blade carriage speed 1-140 m/min. – BRUSHLESS motors Longitudinal pusher carriage speed 90 m/min. Cross pusher carriage speed 135 m/min. Double pusher carriage with 6 grippers on the longitudinal carriage + 10 grippers on the transverse carriage (8 fixed grippers + 2 on the multi-push system) Cutting system for thin panels

Condition: used, Year of construction: 2018, operating hours: 8,563 h, functionality: fully functional, WEILER E 30 X 750 Cycle Turning Machine (2018) Manufacturer: WEILER Type: E 30 X 750 Cycle Turning Machine Lodpfx Aezy Sr Nef Ssrt Year of manufacture: 2018 Condition: Used Operating hours: 8563 h

Condition: used, machine/vehicle number: 008637, Max. panel width: 4500 mm Max. panel length: 4500 mm Main saw blade projection: 95 mm No of Grippers: 10 Ledjzg Uztspfx Af Ssrt

Condition: used, functionality: fully functional, The Selco NEOMIG 242 is a classic, extremely robust MIG/MAG welding machine from the Italian premium manufacturer Selco (which was acquired by voestalpine Böhler Welding several years ago). Unlike modern, fully digital inverter machines, this is a stepped, electromechanical transformer system. This means that it is considerably heavier and larger than a modern compact inverter, but it is considered practically indestructible in metalworking shops and workshops, with an enormous service life and a very stable arc. Technical data at a glance Feature Value / Specification Welding process MIG/MAG (gas-shielded welding) Connection voltage 400 V (3-phase / three-phase) Welding current range 30 – 240 A Duty cycle 30% at 240 A60% at 170 A100% at 131 A Voltage levels Multi-stage, manually adjustable Wire feed Integrated, mechanical roller feed Max. power consumption approx. 8.3 kW Lrodpfx Ajzd S Ryef Set Cooling Typically gas-cooled (standard hose package) Important features & practical advantages Classic transformer technology: Since no sensitive electronics are installed in the power unit, the NEOMIG 242 tolerates dust, metal grinding dirt and moisture much better than modern inverters. It also operates absolutely reliably under harsh conditions in the workshop or on-site. Excellent welding properties: Selco was known in the industry for its perfectly matched copper transformers and chokes. The system provides a very spatter-free, smooth and even arc in steel, stainless steel and also in thinner aluminum applications. Intuitive operation without unnecessary features: No complicated digital menus. You select the appropriate welding level, adjust the wire speed on the potentiometer and can start immediately. Using toggle switches, modes such as 2-cycle / 4-cycle (for long seams) as well as spot and interval welding can also be activated. Used market assessment: Since this series is no longer produced new, it is a real insider tip on the used market for workshops and ambitious DIY enthusiasts. Note: Sold without warranty or guarantee. We assume no liability for the operational functionality of the machine. The sale is made excluding any liability for material defects, to the extent permitted by law.

Condition: not inspected (used), Year of construction: 2012, functionality: unexamined, cutting width (max.): 4,500 mm, feed rate X-axis: 140 m/min, section length (max.): 2,200 mm, Equipment: CE marking, scorer, TECHNICAL DETAILS The machine is equipped with two saw carriages. The technical specifications apply to both: Maximum panel width: 4,500 mm Maximum panel length: 2,200 mm Maximum saw unit tool diameter: 380 mm Maximum scorer tool diameter: 200 mm Ljdpfxsyxn Ado Af Ssrt Saw blade protrusion: 95 mm Number of rip saw grippers: 5 Number of cross cut saw grippers: 8+4 Maximum feed speed: 140 m/min Saw unit 1 connected load: 15 kW Saw unit 2 connected load: 15 kW Scorer unit 1 connected load: 2.2 kW Scorer unit 2 connected load: 2.2 kW MACHINE DETAILS Control system: WINDOWS 10 Machine programming software: Biesse-OSI EQUIPMENT Second flexible push system Quick-change system for saw blades Label printer for barcodes CE marking The machine is sold and delivered in its actual and legal condition (“as seen and approved”), based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, safety, and operation of the machine at the place of destination. External reference: 5711

Condition: used, Year of construction: 2013, functionality: limited functionality, overall weight: 18,500 kg, We are offering this used KraussMaffei 200-750 EX injection molding machine, manufactured in 2013. Type: KM 200-750 EX International size designation: KM 750 EX/200 Year of manufacture: 2013 Machine No.: 61019432 Machine weight: 18,500 kg Please note: The machine is sold without machine conformity, as the safety door on the operator side is missing. The control panel is mounted on the rear of the machine. Lrodpszxk Rusfx Af Sst If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: like new (used), Year of construction: 2008, operating hours: 24,600 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 50 mm, clearance between the columns: 520 mm, mold height (min.): 300 mm, overall weight: 6,600 kg, Equipment: documentation/manual, Here, we offer the following well-maintained used injection molding machine as part of our injection molding machine trade: We also purchase well-maintained injection molding machines, starting from the current model year 2010. We have been a wholesaler of used injection molding machines for over 25 years. Due to recent developments - tax information and advantage for the used machine: From July 1, 2025, used machines can also be considered for tax purposes with a special depreciation of 30% annually. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as with a new machine. Keyword: Growth booster, (§ 7 paragraph 2 EStG-E) Manufacturer: KraussMaffei Type: KM 160-750 Control: MC5 Year: 2008 Machine No.: 61011790 Operating Hours: 24,600 h Injection Unit Injection unit/screw: 50 mm Injection volume: 393 ccm Injection weight: 358 g Heating zones: 5 Nozzle stroke: 350 mm Injection pressure: 1892 bar Heating power: 16 kW Clamping Unit Tie bar spacing: 520 x 520 mm Platen size: 820 x 845 (h x v) Clamping force: 160 tons / 1600 kN Opening stroke: 650 mm Maximum platen distance: 950 mm Minimum tool mounting height: 300 mm Ejector stroke: 150 mm Weight: 6,600 kg Pump motor: 22 kW Lrodpfxsz A Iarj Af Sst Dimensions: approx. 4.90 m × 1.60 m × 2.10 m Extras -Wedge shoe machine mounting -Hydraulic screw back-rotation lock -Hydraulic screw drive with standard speed -Pneumatic valve 1 on the operator side for blowing function (1 piece 5/2-way valve with 1 solenoid coil). -Control selectable: stroke/time or time/time. Quantity can be manually adjusted via 1 throttle valve at the valve outlet. -Nozzle protection door on the operator side, hinged -Ejector area protection door on the operator side, hinged -Mechanical interface according to EUROMAP 18 for handling device on the non-operator side (with intermediate plate up to and including KM 500) -End position "rear" of the ejector and the tool ejector plate monitored in sequence -Chrome-plated tie bars for the clamping unit and injection unit -Media monitor in the pump room for oil pan monitoring -Enlarged oil cooler for a maximum water supply temperature of 31°C. -Hydraulic core pull control 1-way on the non-operator side. -Water manifold 8-way -12 temperature control points for tool hot runner. Self-optimizing three-point PID controller with accuracy class 0.5. -Ejection of the cooled nozzle tip -Fan on the control cabinet -Power supply system: TN-C or TN-C-S or TN-S system (three-phase networks with a separately routed neutral conductor or a neutral conductor routed together with the earth conductor) -1 service socket 1-phase 10 A in the control cabinet, connected before the main switch in a country-specific version. -Signal interface according to EUROMAP 67 with fault signal and power supply socket CEE 16 A for handling device. -Event log for continuous recording and retrospective analysis -Quality monitoring package: Process monitoring (cycle actual values and integrals) by specifying tolerance bands, actual value display, actual value storage. Documentation can be printed. -Z-cycle time analysis, cycle storage -Language: German, Greek Visible peripherals are not included in the scope of supply. Free loading ex our warehouse in Hanover - worldwide delivery possible on request. Inspection under power possible by arrangement.

Condition: used, Year of construction: 2008, power: 36 kW (48.95 HP), cutting height (max.): 105 mm, cutting width (max.): 4,400 mm, cutting length (max.): 2,200 mm, Equipment: scorer, TECHNICAL DETAILS Max. panel width: 4,400 mm Max. panel length: 2,200 mm Max. cutting height: 105 mm Thin panel feed: Yes Post-forming process: Yes Ljdpfx Ajzmtnxjf Sort Gripper system Number of grippers: 10 Flexible, NC-positionable grippers: Yes Grippers on the sliding stop: Yes Sawing unit Main saw blade overhang: 120 mm Max. saw blade overhang: 120 mm Max. tool diameter, main saw: 450 mm Scoring unit: Yes Post-forming scoring unit: Yes Max. tool diameter, scoring saw: 300 mm Max. feed rate: 130 m/min MACHINE DETAILS Control system: Windows Machine programming software: OSI Total connected load: 36 kW EQUIPMENT CE marking Tilting table with 4 tables Saw carriage 1 Barcode label printer Zebra S4M The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8409

Condition: used, Year of construction: 2014, Wittmann Battenfeld HM 150/750 Servo Power / Hybrid Machine / Operating hours: approx. 29,000 in automatic mode Year of manufacture: 2014 Injection unit: Screw diameter: 50 mm Injection weight: 402.2 g Injection pressure: 1,714 bar Shot volume: 442 ccm Lredszy Ilfepfx Af Sjt Clamping unit: Clamping force: 150 t Tie bar distance: 520x470 mm Dimensions of platens: 760x755 mm Ejector: hydraulic Clamping unit: hydraulic Control system: UNILOG B6P - touchscreen Additional equipment: Machine in very good technical condition Electric machine: energy-saving and very quiet Operating hours: approx. 29,000 in automatic mode Total operating hours: 36,714 Euromap 67 Robot interface Air valve x 1 Hydraulic core pull x 1 Injection unit is wear-resistant and corrosion-resistant Main drive motor - servo motor driven by inverter - energy saving Dimensions: Weight: 6,600 kg Length/Width/Height: 4.82x1.42x2.20 m All machines offered are started up by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: used, machine/vehicle number: 007671, Max. panel width: 3800 mm Max. panel length: 3800 mm Ledpfx Afewuufdo Sort No of Grippers: 7

Condition: excellent (used), Year of construction: 2010, Krauss Maffei KM 130-750 CX Year of manufacture: 2010 Injection Unit: Screw diameter: 40 mm Shot weight: 228 g Ledpfszy Inmox Af Sjrt Injection pressure: 2500 bar Dosage volume: 251 cc Clamping Unit: Clamping force: 130 t Tie bar distance: 470x470 mm Platen size: 745x770 mm Ejector: hydraulic Clamping unit: hydraulic Control system: MC5 Additional equipment: Euromap 67 Robot interface Hydraulic core pull x 1 Pneumatic core pull x 6 Control system with 18 hot runner zones Injection unit hardened – bimetal Proportional valve on injection unit – accurate injection Dimensions: Weight: 9000 kg Length/Width/Height: 4.90x1.60x2.10 m All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2019, MAXXMILL 750 5-SIDE UNIVERSAL MACHINING CENTER SIEMENS 840D SL, 15,000 RPM 5-Side Universal Machining Center with Lodjz Anw Hepfx Af Ssrt integrated tool magazine, 30 positions Control: Sinumerik 840D-sl / OPERATE o SHOPMILL dialog programming o USB interface o Network drive / Ethernet o 22" TFT color touch monitor o 3D simulation o EMCONNECT Spindle: Motor spindle, water-cooled Spindle power: max. 20 kW Speed: 50 - 15000 RPM Torque: max. 100 Nm Tool holder: ISO 40 DIN 69871 Drawbar: ISO7388/2 Type B (not included in the basic machine) Travel: X=750+50mm, Y=610mm, Z=500mm Spindle nose – table distance: 150–650 mm Rapid traverse X-Y-Z: 30 m/min B-,C: 25 RPM Table: driven by worm gear Cast table, ground with T-slots Number – Width – Spacing: 5 – 14 – 100 Clamping area: 750 x 600 mm Table load maximum: 300 kg Tool changer: Drum magazine with 30 tool positions. Tool change time (chip to chip): 4.9s (VDI2852) Standard equipment: o Advanced Surface (Siemens option) o LED work area lighting o Spindle air blow-out device for cleaning the tool holder during tool change o Central lubrication o Coolant pump 2 bar o Coolant tank 250 liters o Leveling elements (5 pieces) o Tool magazine door for maintenance o Direct measuring system B-axis Year of manufacture: 2019 Machine no.: M-007.038.19 includes: 8AO-PRESET750SIE LASER DEVICE MARPOSS 8AO-VOLREMSIE630 ELECTRONIC HANDWHEEL 8AO-ADDREFMM750EI AIR - LIQUID COOLING 8AO-TRASPMM750 HINGED BAND CHIP CONVEYOR MM750 8AO-IMPLAVXX50 SPRAY GUN 8AO-COMM750XX01 STANDARD PACKAGING 8AO-MAGUT750XX05 TOOL MAGAZINE FOR 40 TOOLS MM750 8AO-CICMI750SIE AUTOMATIC WORKPIECE MEASUREMENT WIRELESS 8AO-SUPTAVOLAMM750 FRONT SUPPORT TABLE 8AO-APPLGRMM751 ROTARY TABLE THROUGH SPINDLE 8AO-PLU08S00119A AUTOMATIC LOADING DOOR RIGHT MM750 8AO-ILU08X00119A MACHINE ROOM FLUSHING 8AO-ROTTSIE750 GLASS SCALE 3 AXES X-Y-Z SIEMENS 8AO-TRASFUM750MM 40-POSITION MAGAZINE ISO40 ACCORDING TO DIN69872 8AO-COPSUPXX750 UPPER MACHINE COVER MAXXMILL 750 8AO-INTROB012 STANDARD HANDLING INTERFACE PROFINET 8AO-CIN250LMSIE KINEMATIC MEASURING CYCLE 8AO-APPLEN750SIE DIRECT MEASURING SYSTEM B AND C 8AO-MM7503D 3D DATA MODEL MaXXmill 750

Condition: used, machine/vehicle number: 008498, Max. panel width: 2200 mm Max. panel length: 3200 mm Main saw blade projection: 123 mm Lrodpfx Aozvv U Hjf Sot No of Rip saw Grippers: 4 No of Cross Cut Grippers: 10 Panel Rotation Station: yes

Condition: used, Numerical Control OSI Working dimensions mm 4300 x 2200 Automatic rear load with lifting table (mm) 4300 x 2200 Max blade protrusion (mm) 125 System for lifting and rotating the panels inside the machine Device for cutting thin panels (4 mm approx ) N. 10 pliers on the upper main pusher carriage N. 4 pliers mounted on the lower independent pusher carriage Twin Pusher Double lateral aligner Scoring group (max blade diameter / power) 180 / Kw 2,2 Main blade group (max blade diameter / power) 430 / Kw 15 Adjustable speed of the blade carriage (m / min) 1 - 150 N. 4 front benches for panel discharge air veil Lrjdpfjxt Sgtex Af Sot

Condition: used, HSK 80A type tool holders Ledpfezza E Hox Af Sjrt together with cabinet 94 pieces, different types as per photos