Used Schenck Hydropuls Psb 250 for sale (10,424)

Condition: used, Technical details: traction force: 250 kN control: SCHENCK HYDROPULS PSB dayligth: 1000 - 1200 je nach Spannwerkzeug /acc. clamp.tool mm piston stroke: 180mm mm A servo-hydraulic leaf spring testing machine with Series 65 digital electronics is designed for testing leaf springs used in commercial vehicles, railway vehicles, and industrial applications. A hydraulic actuator applies defined loads while force, displacement, and, if required, strain are measured. Typical tests: ·Static spring characteristic (force-displacement curve) Iodpfx Ahozi R R Ajyoih ·Fatigue and endurance testing ·Cyclic load testing ·Service life testing ·Tensile and compression testing ·Production quality control *

Condition: like new (used), Year of construction: 1991, functionality: fully functional, power: 30 kW (40.79 HP), input voltage: 200 V, type of input current: three-phase, pressing force: 250 t, table width: 760 mm, table length: 2,700 mm, overall weight: 35,000 kg, punching force: 250 t, Equipment: documentation/manual, safety light barrier, AIDA NC2-250(1) 250t eccentric press in excellent condition /ctA2/ Manufacturer: AIDA Type: NC2-250(1) Iedpfx Asu Dxb Tjhysih Push force: 160t Year of manufacture: approx. 1991 Stroke length: 170mm Distance above table: (adjustable) 280-400mm Table size: 2700x760mm Bear size: 2100x700mm Electrical power: 3x200V(!!), 30kW - Japanese standard Net weight: 35000kg Size: 2760x2800x3980mm Automatic greasing system. Automatic cutting oil dosing - RAZIOL EST-02 Optionally with disc winder and straightener.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: RERS 0193, workpiece weight (max.): 16 kg, total width: 820 mm, total length: 1,940 mm, total height: 1,660 mm, input current: 6 A, input voltage: 230 V, Schenck TB Sonio high-speed balancing machine for turbocharger rotors. The machine is in full working order and is currently in use (operation is performed using a computer mouse; the touchscreen function does not work – this is a factory defect of these monitors). The balancing machine is sold with 83 adapters for balancing turbines. Iiodpfxjz R Nq Rs Ahyeh

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: RPTC 0149, workpiece weight (max.): 5 kg, total width: 750 mm, total length: 1,560 mm, total height: 1,660 mm, input current: 5 A, input voltage: 230 V, Schenck TB Comfort dynamic balancing machine for rotors. The machine is in full working order and is currently in use (operation is performed using a computer mouse; the touchscreen does not function – this is a factory defect of these monitors). The balancing machine is sold with standard supports for balancing rotors with a total weight of up to 5 kg. Iedpfxoz R Tiws Ahysih

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: RPTC 0163, workpiece weight (max.): 16 kg, total width: 750 mm, total length: 1,560 mm, total height: 1,660 mm, input current: 5 A, input voltage: 230 V, Schenck TB Comfort dynamic balancing machine for rotors. The machine is in perfect working order and is currently in use (operation is performed using a computer mouse; the touch function on the display does not work – this is a factory defect of these monitors). Iisdoz R Tc Ropfx Ahyoh The balancing machine is sold with standard supports for balancing rotors with a total weight of up to 5 kg, and with an optional set of supports for balancing rotors with a total weight of up to 16 kg.

Year of construction: 2007, condition: as good as new (ex-display), “UNUSED – Schenck SLG 2.500 x 5.700 mm“ for Sale Find our complete stock on our website. Manufacturer: Schenck Type: SLG Size: 2.500 x 5.700 mm Deck: 1 Fert. No.: VO35406.A01 Year of Manufacture: 2007 Ijdpfeglvw Isx Ahysih

Condition: excellent (used), Professional industrial pad printing machine from the renowned Swiss company Teca-Print AG. The device is designed for printing on components made of plastic, metal, wood, and other technical parts. Robust industrial construction, ideal for series production, technical marking, advertising prints, logos, and product marking. The machine is in good visual and technical condition. Technical Data: Manufacturer: Teca-Print AG Model: TPU 250 Type: pad printing machine Power supply: 220 V Frequency: 50 Hz Pneumatic control Foot-operated pedal Adjustable worktable Heavy-duty industrial build Manufactured in: Switzerland Serial No.: 9708305 Applications: Iodpfxjz Sm Ddo Ahyjih - printing on plastics - marking metal components - technical prints - logos and advertising - series production - marking industrial parts Includes: - Teca-Print TPU 250 machine - documentation / manuals - accessories as shown in the photos

Condition: used, Electrodynamic balance shaft balancing machine, vertical balancing machine, balancing machine SCHENCK RoTec Type EBLY Manufacturer No. 1FLY, Year of Manufacture 2000 Workpiece/Test Specimen: Balance shafts Number of measuring planes: 2 Number of balancing planes: 2 Angle of balancing components: 145 - 215° Iedpfx Aowgnu Nshyoih Test specimen weight: max. 10 kg Indicated unbalance: 2 gmm/square Lowest value per scale value: 8 gmm/square Balancing spindle speed: 1200 rpm Scale disc with test specimen holder Ø 320 mm Test specimen diameter max. 400 mm Vibration sensor: P01 force sensor Angle position sensor: HBBC incremental encoder CAB 750 microprocessor measuring device RS232 serial interface Workpiece weight: 2.2 kg Workpiece length: 250 mm Workpiece diameter: 70 mm Power supply: 400 V, 50 Hz Rated current: 16 A - SCHENCK M341 balancing indicator Space requirement: L x W x H: 2000 x 1800 x 2000 mm Weight: 620 kg Good condition

Condition: excellent (used), I am offering a Heraeus Kendro UT 6 P laboratory oven with a digital Function Line controller. This device is designed for drying, heating, sterilization, and thermal processing of samples in laboratories, research facilities, and industrial plants. The oven is in perfect working order. The stainless steel chamber is clean and in good condition. It is equipped with a grate and guides that allow for adjusting the shelf height. Technical data: Manufacturer: Heraeus / Kendro Laboratory Products Isdpfx Asz Snfcehyjih Model: UT 6 P Maximum temperature: 250°C Power supply: 230 V / 50–60 Hz Power: 1.27 kW Rated current: 5.5 A Protection class: IP20 Control: digital Function Line panel Stainless steel chamber Forced air circulation for uniform temperature distribution Condition: used, in working order

Condition: good (used), Year of construction: 1983, functionality: fully functional, machine/vehicle number: AHG0482, workpiece weight (max.): 7,000 kg, total width: 2,400 mm, total length: 5,100 mm, total height: 2,000 mm, input voltage: 400 V, rotor diameter: 1,600 mm, year of last overhaul: 2026, The testing machine is currently in operation. Due to a relocation of operations, it can be dismantled in February 2027. The drive has been converted to direct current. Iedpfx Aszu Rguohyoih We use the system as follows: up to 7000 kg, up to 700 rpm up to 2500 kg, up to 1500 rpm up to 1500 kg, up to 3000 rpm up to 250 kg, up to 4200 rpm The system can be inspected in Neusäß by prior arrangement.

Condition: excellent (used), Year of construction: 2012, operating hours: 1,800 h, functionality: fully functional, workpiece weight (max.): 20,000 kg, total width: 3,000 mm, total length: 9,000 mm, total height: 3,000 mm, type of input current: DC, SCHENCK, HM60U, max diameter 3000mm, max weight of rotor 20.000 kg, New measuring unit CAB920 SmartTouch (2025) SCHENCK, Protection enclosure included, CE sign, calibration certificate February 2026, drive 75kW drive with high speed gear box 3 shifts, pair of roller bearing for journal dia. 50 - 200 mm, pair of roller bearing for journal dia. 200 - 400 mm, lubrification system for roller carriages Iedpfxoylin Hs Ahyjih

Condition: good (used), Year of construction: 1983, functionality: unexamined, machine/vehicle number: SFV 1139, overall weight: 1,000 kg, total height: 1,800 mm, total width: 500 mm, total length: 4,150 mm, power: 3.4 kW (4.62 HP), This is a vibrating conveying / vibrating fluidized bed dryer-cooler unit from SCHENCK Process (SFV series/type). Operation: The equipment uses vibration to advance the bulk product along a perforated grid (width 260 mm). Air (hot or cold) is generally injected from below to fluidize, dry, cool, or dust-remove the material during its transfer. Iiodpjzxzrpefx Ahysh Drive system: It is powered by two Schenck vibrating/unbalance motors (SED 180-4 type), each with a power of 1.7 kW, mounted under the chassis. They create the oscillatory movement necessary for transport via micro-jumps. Suspension: The machine body rests on large coil springs to isolate the fixed white chassis (3210x730x930 mm) from the vibrations. Materials: Constructed of stainless steel with sealed inspection ports, suitable for the requirements of the food, chemical, or pharmaceutical industries.

Year of construction: 2020, condition: like new (used), functionality: fully functional, machine/vehicle number: 2050456, We are selling a Magnaflux magnetic particle inspection set (Magnaflux GmbH, Germany). It is new and has not been used since its manufacture in 2020. 1. Magnaflux ETT 250 demagnetizing tunnel with conveyor belt Year of manufacture: 2020. Serial number: 2050447 Power supply: 400 V / 50 Hz, 1.8 kVA, 4.4 A Isdoz R R Epjpfx Ahyoih Ampere-turns: 3.4 kAW. Protection class II Tunnel effective window: [150 × 200 mm] Belt: [2700 mm] long, [200 mm] wide SEW-Eurodrive WAF20 DRN71MS4 geared motor, 0.25 kW, i=48, IE3 Electrical panel and connecting cable included 2. Magnaflux rotary inspection table with bottom extraction Perforated plate with Ø [1300 mm] Integrated centrifugal extractor in the base 4 workstations with padded armrests Side supports for lamps or accessories Rotation: [manual / motorized] Ideal for MT/PT fluorescent inspection in a UV cabin Lot price: [€8,500]. Also sold separately: tunnel [€5,000], table [€3,500]. Prices are negotiable, plus VAT. Collection in Erandio (Bizkaia, Spain). We can assist with loading and transportation.

Year of construction: 1987, condition: excellent (used), functionality: fully functional, 1987 Finzer ZUB 250 Multislide Punching & Forming Machine Used 1987 Finzer ZUB 250 multislide machine for sale. 250kN press unit, 6 forming slides, manual decoiler and 250mm feed. Very good condition. Manufacturer: Finzer Model: ZUB 250 Machine Type: Multislide Punching & Forming Machine Year: 1987 Condition: Very Good Machine Description The Finzer ZUB 250 is a heavy-duty mechanical multislide stamping, punching and forming machine designed for the high-volume production of complex components from strip and wire. Iijdpfxsz S T Inj Ahyoh This machine is equipped with a 250kN / 25-tonne press unit, a set of six forming slides and a manual decoiler, providing a versatile production system capable of combining punching, blanking, bending and forming operations within one production cycle. Multislide technology is particularly effective for components requiring several bends or forming operations from different directions. Compared with conventional single-slide power presses, the multiple independently arranged forming slides allow complex parts to be produced efficiently with reduced secondary operations. Main Specifications Manufacturer: Finzer Model: ZUB 250 Year: 1987 Machine Type: Multislide Punching & Forming Machine / Stamping & Bending Machine Press Capacity: Approx. 250kN / 25 tonnes Number of Forming Slides: 6 Maximum Feed Length: Approx. 250mm Maximum Strip Width: Approx. 60mm Maximum Wire Diameter: Approx. 3mm Forming Slide Capacity: Approx. 30kN per slide Forming Slide Stroke: Approx. 0–50mm Maximum Production Speed: Up to approx. 400 strokes/minute, depending on tooling, component and material Machine Weight: Approx. 4,000kg 250kN / 25 Ton Press Unit The machine incorporates an approximately: 250kN / 25-tonne press station The press operation can then be combined with movements from the surrounding forming slides to produce complex finished components in a continuous cycle. Six Forming Slides This Finzer is supplied with a complete set of six forming slides. The multiple-slide arrangement is one of the main advantages of the ZUB system, allowing tooling to approach the component from several directions during the same production cycle. Forming capacity per slide: 30kN Slide stroke: Adjustable up to approximately 50mm The slides can be tooled for sequential bending, forming and positioning operations. Manual Decoiler Included The machine is supplied with a manual decoiler for coil-fed production. Coil & Strip Feed Capability Comparable Finzer ZUB250 machines are specified with: Maximum Strip Width: Approx. 60mm Maximum Wire Diameter: Approx. 3mm Maximum Feed Length: Approx. 250mm Feed length is typically adjustable to suit the individual component and tooling setup. High-Speed Production Depending on component design and tooling, period ZUB250 specifications quote operating speeds of approximately: 25–400 strokes per minute This makes the Finzer particularly suitable for repetitive, high-volume manufacture where several conventional press and forming operations might otherwise be required. Mechanical Cam-Controlled Multislide System The Finzer ZUB series uses a mechanically controlled cam-driven forming system. Cam-controlled multislide machines are particularly effective for repeat production because the motions of the forming tools can be precisely coordinated with the press and material feed.

Condition: used, Year of construction: 2012, functionality: fully functional, overall weight: 2,600 kg, type of input current: AC, input voltage: 400 V, 4 x Wagner Permanent Magnet Separators – various models A total of 4 used permanent magnet separators from the manufacturer Wagner Magnete are for sale. The magnetic separators were used in our recycling and processing plant and serve to automatically separate ferromagnetic components from different material flows. Due to the restructuring and upcoming reconstruction of our recycling plant, the four magnetic separators are being offered for sale. Technical data of the 4 magnetic separators: Magnet 1: - Manufacturer: Wagner Magnete - Type: 0452-115/130-250 G2 - Equipment number: 546235 - Weight: approx. 2,600 kg - Motor power: 3 kW Magnet 2: - Manufacturer: Wagner Magnete - Type: 0452-115/170-250 G2 - Equipment number: 546236 - Weight: approx. 3,340 kg - Motor power: 3 kW Magnet 3: - Manufacturer: Wagner Magnete - Type: 0452-95/130-250 G2 - Equipment number: 546237 - Weight: approx. 2,200 kg - Motor power: 2.2 kW Magnet 4: - Manufacturer: Wagner Magnete - Type: 0452-95/130-250 G2 - Equipment number: 546986 - Weight: approx. 2,200 kg - Motor power: 2.2 kW Further technical specifications (all 4 magnetic separators): Ijdpfxjz R Sw Ho Ahysih - Belt speed: 1.5 m/s - Motor manufacturer: SEW - Operating voltage: 400 V - Current type: Three-phase (AC) - Frequency: 50 Hz - Protection class: IP55 Condition and sale: All four magnetic separators are in used condition and show corresponding signs of wear and tear due to operation. The magnetic separators can be purchased individually or as a complete package. An on-site inspection is possible after prior appointment. Technical documentation is available. Price upon request. If you are interested or have any further questions, please do not hesitate to contact us.

Condition: used, Manufacturer: Heraeus Model: NTU 100/50 Iedoz I Rbiepfx Ahyeih Max. temperature: 250°C Internal dimensions: 1000 x 1500 x 1000 mm Weight: 690 kg

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 39/7053, cutting length (max.): 5,100 mm, saw blade diameter: 550 mm, total length: 5,350 mm, total width: 1,900 mm, total height: 1,550 mm, type of input current: three-phase, pivoting range: 45 °, input voltage: 400 V, air pressure: 6 bar, overall weight: 1,400 kg, space requirement height: 1,550 mm, space requirement length: 8,300 mm, space requirement width: 1,900 mm, We are offering this used Rapid DGL 250 double miter saw, manufactured in 2008. Manufacturer: Rapid Model: DGL 250 Year of manufacture: 2008 Condition: used Category ID: 1062 Type ID: 1498 Machine type: Double miter saw Cutting length: 5100 mm Control: PCE5000 Dimensions: L/W/H 5350/1420/1900 at a cutting length of 3700 mm Swivel range: 45 and 90 degrees Saw blade: 550 mm Feed: right Dust extraction system included Iiodpfoz Hy Hfex Ahyoh Currently still in use, due to new investment. Available from week 20. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 171648, turning diameter: 380 mm, spindle bore: 88 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 35 rpm, travel distance X-axis: 230 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 575 mm, spindle motor power: 26,000 W, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 21 m/min, rapid traverse Z-axis: 33 m/min, total height: 2,850 mm, total length: 4,200 mm, total width: 2,000 mm, overall weight: 5,600 kg, bar passage: 77 mm, spindle nose: A2-8, center height: 1,020 mm, quill mount: MK 5, Equipment: documentation/manual, MAZAK QUICK TURN NEXUS 250 MY CNC lathe - Chuck size: 10 inches - Max. swing diameter: 675 mm - Standard turning diameter: 276 mm - Max. turning diameter: 380 mm - Distance between spindle nose and turret face: 115 - 690 mm Iiedpfjz Nv H Ujx Ahyjh - Load capacity including chuck: 400 KGF (chuck work), 700 KGF (bar work) - Acceleration and deceleration time: 2.3 sec - Travel range of tailstock: 550 mm - Max. thrust: 700 KGF - Number of tools (milling cutters): 12 - Tool size: max. external turning tool: 25 x 25 mm, internal turning tool diameter: 40 mm, milling drill diameter: 20 mm, milling tap: M12, shank milling cutter: 20 mm - Switching time to next/opposite position: 0.2/0.6 sec - Milling spindle speed: 25 to 4500 rpm - Rapid traverse C-axis: 40 rpm - For further technical data, see the photographed data sheet - With technical documentation - Transport height: approx. 1850 mm Note: without bar feeder, includes the collets and tool holders shown in the pictures - some are powered. Important note: the workbench possibly shown in the pictures is not included in the scope of delivery! FCA D-01445 Radebeul - loaded onto a truck

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, workpiece weight (max.): 300 kg, total width: 1,260 mm, total length: 1,500 mm, Universal dynamic balancing machine for rotors from 3 - 300kg. CAB803 measuring system, class C protection, CE mark Iisdpfxsu Nmppo Ahyoh

Condition: used, Year of construction: 2014, The portal-type hydraulic press is designed for bending or straightening, as well as for processing finished welded components, and for disassembling mining machinery and other equipment. It is used in mechanical, production, and repair plants, etc. Manufacturer: PATENTUS S.A. Type: PAT 300-2/250-2 Year of manufacture: 2014 Technical specifications: Dimensions: width: 4200x3140 mm, height: 3600 mm Weight: 25000 kg Table surface: 4200 mm x 2140 mm Diameter of gate cylinder 1: 2 x 300 mm Diameter of gate cylinder 2: 2 x 250 mm Force of gate cylinders 1: 2 x 1768 kN Force of gate cylinders 2: 2 x 1228 kN Maximum clearance: 1240 mm Iedpfxehktq Ao Ahysih Stroke of working cylinders: 600-660 mm Gate travel: 1420 mm Equipment: - two gates - table - four working cylinders - gate movement cylinder - working cylinder movement cylinder - power unit with T-100/30 pump (year 2006, overhauled in 2011) Technical condition: used, requires inspection.

Condition: used, Year of construction: 2009, operating hours: 5,207 h, functionality: fully functional, machine/vehicle number: MPC 250, saw blade diameter: 500 mm, cutting depth: 50 mm, cutting width (max.): 250 mm, power: 9 kW (12.24 HP), total height: 1,500 mm, total length: 21,000 mm, total width: 2,000 mm, type of input current: three-phase, overall weight: 3,150 kg, MODEL MPCNC 250 FAST Instal power [kW] 11,6kW (25A) Saw blade motor [kW] 5,5 Rools motor [kW] 3,5 Saw blade Dia [mm] 500 x 3,5 x 40, Z 92 Isdpsz Ilttefx Ahyjih Infeed rolls[piece] 6 Pressing rolls [piece] 6 Saw blade speed [m/s] 89,9 Saw blade revolution [min-1] 89,9 Cutting area s = 50 - 250 mm s = 100 - 180 mm Outlet dia 2 x fi 120 mm Air (at 30m/s) 2400 m3/h Air consumpt (6.10bar or. 5 Pa) 270 NL/min Min cut (sec) 0,3 (0,12) Max feeding speed 240 m/min Max acceleration 32 m/s2 INPUT MATERIAL edged pieces Input length od 900 do 5000 mm Thickness - adjustableo od 15 do 90 mm

Condition: excellent (used), functionality: fully functional, PYE 250 S1 hydraulic press. Isdjz Tc U Tspfx Ahyoih

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, workpiece weight (max.): 5 kg, total width: 360 mm, total length: 700 mm, Universal dynamic balancer for rotors from 10g - 5kg Iijdpfeuh Svpex Ahyeh

Condition: excellent (used), Catalog number 7445 TECHNICAL DATA - track width 250mm - roller width 400mm - max. blade diameter 400mm - blade bore diameter 80mm - max. cutting height 140mm - table width with clearance 730mm - table length 2120mm *from above: - pawls Iiodpfx Ahjzx Rntsyeh - smooth pressure roller - pawls - smooth pressure roller - saw arbor - 2 smooth pressure rollers from below: - guide - smooth sliding roller - pawls - track - central lubrication - 2 lasers - stepless feed rate adjustment - feed motor 1.1kW - main motor 37kW - electric body lifting 0.75kW - electric saw arbor lifting 0.75kW - dust extraction nozzle diameter 200mm - overall dimensions L/W/H 2200x1850x2100mm - weight approx. 3000kg ADVANTAGES - German production - laser - electric body and arbor lifting - stepless feed rate adjustment - multi-blade saw, used, very good condition Net price: 109900 PLN Net price: 25558 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to higher fluctuations)

Condition: excellent (used), Catalog number 7308 TECHNICAL DATA - track width 250mm - shaft width 350mm - shaft diameter 80mm - max blade diameter 400mm - blade bore diameter 80mm - max cutting height 150mm - table width with clearance 700mm - table length 1790mm from above: - pawls - pressure shaft, sliding - pawls - pressure shaft, smooth - shaft with saw blades - smooth pressure shaft, 2 pcs from below: - guide strip - sliding, smooth shaft Ijdozww A Iopfx Ahysih - pawls - track feed table - roller width 500mm - number of rollers 3 pcs - overall dimensions of the feed table (length/width/height) 580x530x900mm outfeed table - roller width 500mm - number of rollers 6 pcs - overall dimensions of the outfeed table (length/width/height) 1210x535x900mm - central lubrication - stepless feed speed adjustment - main motor 37kW - dust extraction nozzle diameter 140mm - overall dimensions of the multi-blade saw (length/width/height) 2000x1450x2000mm - total weight approx. 3000kg ADVANTAGES – German production – large cutting height – feed and outfeed tables – used multi-blade saw, very good condition Net price: 46900 PLN Net price: 10910 EUR Net price calculated according to the exchange rate of 4.30 PLN/EUR (the price may change in case of larger exchange rate fluctuations)