Used Schön Sh 25 for sale (16,664)

Condition: used, Double-column Hydraulic Press SCHÖN Type SH 25 Machine No. 2440 Year of manufacture: 1979 Press force: 25 tons Column spacing: 630 mm Fpedpfx Aoyz Dr Tolqjg Lateral passage between columns: 120 mm Table area: 580 x 320 mm Ram area: 360 x 220 mm Clamping pin hole: Ø 40 mm Maximum ram stroke: 100 mm Maximum installation height: 270 mm Table height above floor: 900 mm Motor power: 7.5 kW Power supply: 380 Volt, 50 Hz - Main cylinder overhauled in 2025 - SICK LUV 206 safety light curtain - Two-hand control - Stroke counter - Rapid stroke and working stroke - Stroke limitation dependent on pressure or position - Mechanically adjustable fixed stop - Press force regulation - Press time extension 1–10 s (pressure holding time) - No operating manual and no wiring diagrams Required space (L x W x H): 1450 x 1100 x 2200 mm Weight: 1200 kg In good condition

Condition: used, Double-column hydraulic press SCHÖN Type SH 25 Machine no.: 4453 Year of manufacture: 1999 Pressing force: 25 tons Column width: 500 mm Lateral column clearance: 120 mm Table surface: 440 x 320 mm Table opening: Ø 175 mm Ram surface: 360 x 220 mm Clamping pin bore: Ø 40 mm Max. ram stroke: 100 mm Max. installation height: 270 mm Table height above floor: 900 mm Motor power: 7.5 kW Fpsdpsw A Amrsfx Alqjg Connection voltage: 380 V, 50 Hz Equipment: - Safety light curtain SICK, type FGS 300-11 - Two-hand operation - Stroke counter - Rapid and working stroke - Stroke limitation dependent on pressure or position - Mechanically adjustable fixed stop - Pressing force regulation - Adjustable pressing time 1–10 s (pressure holding time) - Adjustable return stroke speed - Blow-off device electrically pre-wired, without air valve - Manual hydraulic tool safety, adjustable via handwheel Dimensions (L x W x H): 1300 x 1200 x 2200 mm Weight: approx. 1200 kg Good condition

Year of construction: 1981, condition: ready for operation (used), Press force: 650kN, Stroke: 150mm, Pressure piston diameter: 190mm, Column spacing X/Y: 950mm/460mm, Installation height: 500mm, Table dimensions X/Y: 900mm/870mm, max. stroke: 150mm, Operating pressure: 200bar, Machine dimensions X/Y/Z: approx. 1500mm/1750mm/2400mm, Weight: approx. 3000kg. Documentation available. An on site inspection is possible. Fpodpfeyq R D Hox Alqsg

Year of construction: 1978, condition: used, pressure 25 t stroke 100 mm table surface area 440x320 mm ram surface 360x220 mm hole in the table 160x100 mm table height 900 mm tool hole in ram Ø 40 mm dayligth 280 mm Fpsdpolp U A Isfx Alqjg weight of the machine ca. 1,5 t dimensions of the machine ca. BxTxH 1500x1500x2100 mm

Condition: used, Year of construction: 2006, pressure 250 t distance between columns 3000 mm stroke 600 mm Distance table/ram, stroke up 900 mm Table surface area 2500 x 1300 mm Table height above floor 1050 mm Side window 1350 mm Ram surface 2500 x 1300 mm Speed down 500 mm/s Speed up 400 mm/s Fpedpovuuhajfx Alqeg Working speed 36 - 64 mm/s Oil volume 2700 l Power capacity 137,0 kW Weight 54,0 t Dimensions (WxDxH) 4,1 x 4,55 x 6,15 m with oil-hydraulic drive, hydraulic cutting impact cushioning, hydraulic ram interlocking No foundation pit necessary

Condition: used, machine/vehicle number: 008347, Max. panel width: 1200 mm Max. panel length: 2500 mm Max. panel stack height from the ground: 1600 mm Fjdpfxeyngzps Alqepg Lifting capacity: 50 Kg Work capacity: 18 Cycles/min Movement system: suction cups.

Condition: excellent (used), mileage: 116,000 km, power: 368 kW (500.34 HP), first registration: 03/2020, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,300 mm, Year of construction: 2020, operating hours: 3,941 h, Equipment: air conditioning, cruise control, electric window regulation, retarder, trailer coupling, = Additional options and equipment = - Aluminium fuel tank - Intarder - Alloy wheels - Air suspension - Sun visor - Xenon lighting - Power take-off (PTO) - Central lubrication - Towing hitch = Further information = Axle configuration Front axle 1: Steered Front axle 2: Steered Rear axle 1: Alloy wheels Rear axle 2: Alloy wheels Fpsdpfx Aey Dfaqjlqog Weights Unladen weight: 29,000 kg Payload: 3,000 kg Gross vehicle weight: 32,000 kg Functional Body manufacturer: Palfinger CE marking: yes Condition Technical condition: very good Visual condition: very good Financial information Price: On request

Year of construction: 2021, condition: used, functionality: fully functional, Probst Paving Machine SH-2500-GREENLINE — Year of manufacture 2021 Used, from the professional rental fleet of Kurt König Baumaschinen GmbH, Einbeck, Germany. Condition & Notes: Fsdpfx Alsy A E Hhjqspg - Condition: Used, ex-rental, regularly serviced - Functionality: Fully operational - Product photos to follow — please contact us for current images - On-site inspection in 37574 Einbeck available by appointment Price EUR 6,500 plus VAT | EXW Einbeck | Delivery upon request

Condition: new, functionality: fully functional, Year of construction: 2026, CONSTMACH stationary stone crushing plants are designed with a focus on high efficiency and durability, offering long-lasting industrial solutions. Each plant is specifically configured based on the hardness and abrasiveness of the material to be crushed and the desired product size. With production capacities ranging from 50 t/h to 1,000 t/h, they perfectly adapt to projects of different scales. The crusher types used in the plants are selected according to material properties to achieve maximum performance. Our design team creates optimized 3D layout plans using feeder, crusher, screen, bunker, washer, and conveyor components. This ensures high capacity, low energy consumption, and minimal maintenance costs throughout the production process. Each plant is custom-designed to suit the investment budget and operating conditions. Our engineering team offers the most suitable projects and proposals to prevent unnecessary expenses. CONSTMACH stationary crushing and screening plants are equipped with high-quality electronic components from SIEMENS and SCHNEIDER, and minimize operator intervention thanks to a PLC-based fully automated system. This provides safe, fast, and stable production. Fixed Stone Crushing Plant Technical Specifications Production Capacity: 50 – 1,000 t/h Type of Material to be Crushed: Varies according to the desired product type Fpsdexqgwzspfx Alqog Final Product Dimensions: Adjustable upon request Crusher Types: Jaw, impact, cone, or vertical shaft crusher options Why Choose a Fixed Stone Crushing Plant from CONSTMACH? CONSTMACH makes a difference with its engineering approach that offers customized solutions to each customer. Our plants operate continuously for many years thanks to high-quality components, energy-efficient designs, and reliable automation systems. With our after-sales support service that prioritizes customer satisfaction, we are by your side at every stage of your investment. CONSTMACH is the right choice for fixed rock crushing plants offering powerful performance, low operating costs, and maximum efficiency. What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products tailored to the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: used, maximum load weight: 895 kg, overall weight: 1,300 kg, axle configuration: 1 axle, first registration: 07/2021, loading space length: 1,975 mm, loading space width: 1,275 mm, total width: 1,960 mm, total height: 590 mm, A29 GW26G000232 Fpsdpfxoyn Ub Do Alqeg Motorcycle trailer for 3 motorcycles, Manufacturer: STEMA, Model: SHM 13-25-18.1, * 100 km/h version with installed shock absorbers * Integrated ramp rail in every standard version * Low loading platform and long ramp rail * Convenient loading and unloading * Smooth driving behavior and robust chassis * Stable wheel brackets for secure motorcycle support * Side rails (optional) * Numerous additional lashing points * Manufactured according to EC regulations * Side underrun protection bars on both sides 1,300 kg, high-loader, inertia braked, 100 km/h, high-loader, for 3 vehicles, with 2 loading ramps behind the license plate, converted to 13" tires Loading height: 580 mm Errors and prior sale excepted.

Condition: used, Frame die-cutter - Swivel frame die-cutter - Flatbed die-cutter - Platen die-cutter - Eccentric press Punch + feed for the use of bandknife punching tools Flatbed die cutter HELMERDING type PSH 25 Com. No. EP 97784 Machine. No. 6073 Year of construction 1998 Fpsdpjdzqmzefx Alqsg Compressive force 25 ton. Clearance between the tie rods 700 mm Table surface = installation space 800 x 670 mm Table surface = installation frame width 510 x depth 440 mm, plate thickness 20 mm Plunger surface 800 x 670 mm Hole in the table 490 x 420 mm Plunger stroke 45 mm Ram adjustment travel 10 mm Installation height = tool height 100 mm Stroke rate up to 250 strokes/min. Motor power 15 kW Mains connection 400 Volt, 50 Hz - Controlled drive for infinitely variable stroke rate - Pneumatic clutch-brake combination - ram compensation cylinder - VOGEL automatic central lubrication system - solid base plate with 4 swinging elements under the machine Space requirement L x W x H approx. 3000 x 2000 x 3000 mm Weight 4.5 tons good condition The machine was formerly used for cutting out cardboard blanks. Ideal for cutting out non-woven fabrics or similar for breathing masks.

Condition: good (used), Year of construction: 2019, operating hours: 8,995 h, load capacity: 2,500 kg, lifting height: 5,450 mm, fuel type: diesel, mast type: triplex, construction height: 2,500 mm, Still RX 70-25 Triplex 545 Freelift / Sideshift / 4th / 5th Function, Diesel, 2019 Video can be sent via Whatsapp. Fsdpfxoymygie Alqopg Ongoing stock, see website. Prices are ex Nuland. Van de Wert Trading B.V. maintains a variable stock of machines, trucks, trailers, and attachments. All our deliveries are at trade prices in AS-IS condition without warranty. (see our terms and conditions) For a viewing and/or test drive, you can make a non-binding appointment. Please call in advance, as we are not always present. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, Satrind 8/25 Twin Shaft Shredder, 18KW Motor (brand new) 30 x 50 mm 1 pick blades. Cutting Chamber 758mm x 700mm machine built onto stand with hydraulic ram that can be operated independently of control panel by a remote control. The machine has been completely refurbished with new blades, resharpened new bearings, seals & safety switches fitted & can be seen working. Fpsdpfxjwxfgge Alqeg Ideal for plastic drums, crates, bins. For price contact seller for more information & a video of the machine operating if required.

Condition: good (used), machine/vehicle number: 50815539642710, Year of construction: 2019, operating hours: 2,748 h, load capacity: 5,000 kg, lifting height: 25,000 mm, overall weight: 18,000 kg, enginetype: Diesel, manufacturer: Magni Fodpfsw Rza Esx Alqopg

Condition: ready for operation (used), Year of construction: 2009, A wood dust extraction and filtration system Krämer for saw lines is available. 1) Wood dust extraction unit Krämer VKA-P 100/650/55, air volume flow: 27000m³/h, pressure increase: 3800Pa, motor power: 55kW, V-belt length: 3550mm. 2) Filtration unit Krämer GFS Shake 160/25/250, filtration capacity: 30000m³/h, filter material: polyester needle felt, material discharge: TFS40/10/1.1. 3) Fan Krämer VFM-R 45/250/3, air volume flow: 3000m³/h, pressure increase: 2500Pa, motor power: 3kW. 4) Fan Krämer VFM-P 42/200/4, air volume flow: 2500m³/h, pressure increase: 3000Pa, motor power: 4kW. 5) Separator tank/filter hopper Krämer. 6/7) 2x axial fans. Including pipes and peripheral equipment. The motor flange on the discharge motor is defective. Documentation available. An on-site inspection is possible. Fpedjxl Elgjpfx Alqsg

Condition: used, mileage: 453,510 km, power: 375 kW (509.86 HP), first registration: 09/2017, fuel type: diesel, empty load weight: 19,420 kg, maximum load weight: 12,580 kg, overall weight: 32,000 kg, axle configuration: 8x2, brakes: retarder, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, loading space length: 6,800 mm, loading space width: 2,550 mm, Equipment: ABS, additional headlights, air conditioning, cabin, compressed air brake, crane, cruise control, differential lock, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, parking heater, power assisted steering, seat heater, soot filter, traction control, trailer coupling, * German vehicle * Single owner Fpsdpfxsxrvk To Alqeg * Documentation available * Only 453,510 km, original mileage * Condition: see photos * Palfinger PK 34002-SH E folding rear-mounted loading crane * Jib PJ 060 B * Hook height: 30 m * Lifting capacities: at 4.4 m = 6,700 kg; 6.3 m = 4,450 kg; 8.2 m = 3,250 kg; 10.3 m = 2,450 kg; 12.4 m = 1,960 kg; 14.5 m = 1,640 kg; 16.7 m = 1,420 kg; 18.8 m = 1,200 kg; 19.7 m = 760 kg; 21.6 m = 680 kg; 23.4 m = 620 kg; 25.2 m = 570 kg; 27.2 m = 480 kg; 29.2 m = 210 kg * Radio remote control * 5th and 6th control circuit * 4 hydraulic outriggers * Swivel fork mount * Platform body * Platform dimensions: Length = 6,800 mm x Width = 2,550 mm * Wooden floor * Multilock * Trailer hitch * Cab with single bunk and 2 seats * Air conditioning * Auxiliary heater * Retarder * 1st, 2nd & 4th axle steered * 4th axle liftable * Leaf/air suspension with lifting and lowering function * Multifunction steering wheel * Cruise control * Automatic transmission * Xenon headlights * Blind spot assistant * Comfort driver’s seat, air-suspended * Heated and ventilated seats * Alloy wheels * Roof hatch * Hill-start assist * Radio USB AUX * Hands-free system * CB radio * Rotating beacons * LED daytime running lights * ABS/ASR/ESP * Full air suspension * Differential lock * Sun visor * Wheelbases: 1,700 mm + 4,100 mm + 1,350 mm * Gross vehicle weight: 32,000 kg / 34,000 kg possible * Unladen weight: 19,420 kg * Payload: 12,580 kg If a new TÜV inspection is required, we are happy to provide a quote from one of our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, without new UVV. More trucks can be found on our website at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and assessment of the goods to ensure that buyers do not have any false expectations regarding the condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly desired. All information is provided without guarantee. We do not accept liability for errors or incorrect information in this offer. The buyer is obliged to independently verify condition and equipment of the goods/vehicles. Subject to change, prior sale and errors.

Condition: new, Year of construction: 2025, machine/vehicle number: SH-250, functionality: fully functional, pressing force: 250 t, stroke length: 450 mm, operating speed: 4 mm/s, reverse speed: 8 mm/s, total length: 3,000 mm, total width: 2,000 mm, total height: 1,700 mm, Equipment: documentation/manual, MODEL: SH-250 STANDARD DESCRIPTION: Our SH series horizontal hydraulic ram press is engineered with a range of three different capacities, from 100 to 250 tons. These horizontal hydraulic presses are specifically designed for straightening and bending profiles, bars, and beams. The horizontal configuration enables easy handling of large-size beams and profiles. The latest-generation HS series offers versatile utility, with the possibility to fit a wide variety of tooling. They operate at a hydraulic pressure below 350 BAR to ensure greater durability of the entire hydraulic system. STRUCTURE AND TABLES The SH series horizontal straightening hydraulic presses feature an electro-welded "C"-frame structure made exclusively from S355JR steel. The frame is stabilized and machined after welding to ensure perfect parallelism and precision. Design and calculation are carried out using finite element software, thus maintaining our high standards of robustness, accuracy, and quality. They come equipped with a main anti-rotation push cylinder and a rear support table, both made from high-strength steel and machined with DIN 650 T-slots. Standard equipment includes C45E steel support blocks. Two adjustable side rollers are also included as standard, one on each side. CYLINDER AND HYDRAULIC UNIT Double-acting cylinder with honed sleeve, chrome-plated piston, and maintenance-free anti-wear guides. Cylinder is operated by a lever hydraulic distributor. It is fitted with a removable block to prevent piston damage. Single speed motor-driven hydraulic power unit. ELECTRICAL INSTALLATION AND SAFETY Electrical system includes a motor protection switch and emergency stop. Supplied with a glycerine-filled pressure gauge (tonnage readout) and hydraulic oil. Fully complies with all essential CE safety and health regulations. Supplied with an operation manual. OPTIONAL ACCESSORIES • Basic feed rails from 3,000 mm up to 12,000 mm, height adjustable. Fpedpfowk Hkqex Alqog • Motorized feed rails from 3,000 mm up to 12,000 mm. • Hydraulic elevation and tilting of feed rails. • 415 mm folding device. PROMECAM clamping system. • Additional single-speed manual pump, allowing both manual and powered operation. • Low-voltage electric foot pedal control. • Precision limit switches with cylinder anti-rotation system and low-voltage electric foot pedal control. • Two-speed hydraulic power unit. • Geometry customized to your requirements.

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 350 mm, roller (top) diameter: 350 mm, side roll diameter: 260 mm, roller length: 2,550 mm, sheet thickness (max.): 25 mm, STANDARD EQUIPMENT * Lower, upper, and side rolls are hydraulically actuated and move linearly up and down via body-mounted pistons * Protected against overload * Upper and side rolls are driven by hydromotors and planetary gearboxes (3-roller motor drive system) * Positions of the rolls can be easily read via three digital displays * The hydraulically opening head and automatically upward-moving shaft make it easy to remove the bent workpiece * Extremely easy operation with the mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone rolling system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620 -680) * Dual speed operation system OPTIONAL EQUIPMENT * NC and CNC control for automation * Top crane (elevator) for support in large diameter rolling * Hydraulic side supports for large diameter rolling * Hydraulic sheet ejection system * Ground and polished rolls for special applications * Stepless speed adjustment system Fpodow Smb Rjpfx Alqeg * Electronic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Rolling Length: 2550 mm Pre-bending: 16/20 mm Bending: 20-25 mm Upper & Lower Roll: 350 mm Side Roll: 260 mm Motor Power: 23.5 kW Bending Speed: 1.5 - 5 m/min Length: 4850 mm Width: 1900 mm Height: 1950 mm Weight: 12,800 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 280 mm, roller (top) diameter: 280 mm, side roll diameter: 220 mm, roller length: 2,550 mm, sheet thickness (max.): 16 mm, STANDARD EQUIPMENT * The upper, lower, and side rolls move linearly up and down via hydraulically actuated body-mounted pistons. * Protected against overload. Fjdpfx Asw Smfcjlqopg * Upper and side rolls are driven by hydromotors and planetary gearboxes (all three rolls are motor-driven). * The positions of the rolls can be easily read through three digital display gauges. * The hydraulically opening head and automatic upward-lifting shaft allow easy removal of the bent workpiece. * Very user-friendly operation with a mobile control panel. * Welded steel construction body. * Rolls made from SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts. * Conical bending system. * Centralized lubrication system. * Hydraulic balancing system for parallel movement of the rolls (Ø280 - 320 - 350 - 380 - 400 - 460). * Electronic balancing system (Ø500 - 550 - 580 - 620 - 680). * Dual-speed operating system. OPTIONAL EQUIPMENT * Automation with NC and CNC control consoles. * Upper crane (hoist) for support in large diameter rolling. * Hydraulic side supports for large diameter rolling. * Hydraulic plate ejector system. * Ground and polished rolls for special applications. * Infinitely variable speed adjustment system. * Electronic balancing system for parallel movement of the rolls (Ø280 - 320 - 350 - 380 - 400 - 460). TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-bending: 10/12 mm Bending: 12/16 mm Upper & Lower Roll: 280 mm Side Roll: 220 mm Motor Power: 16.5 kW Bending Speed: 1.5 - 5 m/min Length: 4850 mm Width: 1700 mm Height: 1850 mm Weight: 9650 kg

Condition: new, Year of construction: 2025, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 400 mm, roller (top) diameter: 400 mm, side roll diameter: 300 mm, working width: 2,550 mm, sheet thickness (max.): 40 mm, Equipment: documentation/manual, emergency stop, foot remote control, hardened rollers, STANDARD EQUIPMENT * Upper, lower, and side rolls are linearly moved up and down by hydraulically actuated pistons attached to the frame * Protected against overload * Upper roll and side rolls are driven by hydromotors and planetary reducers (3 roll motor drive) * The position of the rolls can be easily read with three digital indicators * The hydraulically opening head and the automatically lifting shaft allow the bent part to be removed easily * Very easy operation with movable control panel * Welded steel construction body * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual speed operation system OPTIONAL EQUIPMENT * NC and CNC control for automation * Top crane (elevator) to support large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet removal system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel shaft movement (Ø280-320-350-380-400-460) Fjdpfoxw Ebxjx Alqjpg TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-Bending: 25/30 mm Bending: 30/40 mm Upper & Lower Roll Diameter: 400 mm Side Roll Diameter: 300 mm Motor Power: 38.5 kW Bending Speed: 1.5 – 5 m/min Length: 5350 mm Width: 2250 mm Height: 2350 mm Weight: 17,800 kg

Condition: excellent (used), mileage: 200,000 km, first registration: 11/2020, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: engine braking, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, loading space length: 6,300 mm, loading space width: 2,550 mm, Year of construction: 2019, operating hours: 6,523 h, Equipment: crane, electric window regulation, power mirror, trailer coupling, = Additional options and accessories = - Power brake booster - Low noise - Rotating beacon - Sun visor Fsdsxwlr Depfx Alqjpg - Toolbox - Xenon lighting - Power take-off (PTO) - Towing hitch = Additional information = Axle configuration Front axle 1: Steered Front axle 2: Steered Rear axle 1: Suspension: Air suspension Rear axle 2: Lift axle; Suspension: Air suspension Weights Unladen weight: 23,686 kg Payload: 12,314 kg Gross vehicle weight: 36,000 kg Functional Body manufacturer: Palfinger PK 65002-SH F + JIB PJ 125 E CE marking: yes Condition Technical condition: very good Visual condition: very good Financial information Price: On request

Condition: used, functionality: fully functional, FESTO DGPL-40-1250-PPV-A-B-KF-GH-SH Linear actuator. Good working condition. Please check out our other listings as well. Fpjdpfx Alotwqrweqeg

Condition: good (used), AGFA Avantra 25 in great condition. With 2 Supply-Cassettes and 1 Takeup-Cassette. System is completly cleaned and checked. Resolution: 1200, 1800, 2400 and 3600 dpi - max. image area: 44,9 x 63,5 cm - including Techkon Densitometer for film. Refurbished 2024 in Germany. Fpedobr Ah Ejpfx Alqsg

Condition: used, OMNIFLO Overhead conveyor system Linear guide Transport Schönenberger Complete system for hanging goods RA1994 Manufacturer: Schönenberger Various components available: Straight sections can be optionally shortened: 1 pcs. x 1.00m 1 pcs. x 1.18m 1 pcs. x 1.52m 1 pcs. x 1.54m 1 pcs. x 1.54m 1 pcs. x 1.74m 6 pcs. x 1.80m 1 pcs. x 1.84m 1 pcs. x 2.05m 1 pcs. x 2.25m 7 pcs. x 2.28m 1 pcs. x 2.46m 2 pcs. x 2.50m 1 pcs. x 2.50m 1 pcs. x 2.60m 1 pcs. x 2.79m 5 pcs. x 3.00m 1 pcs. x 3.00m Fedpfxjvmqb Ho Alqopg 1 pcs. x 3.34m 1 pcs. x 3.50m 4 pcs. x 3.64m 1 pcs. x 3.66m 1 pcs. x 3.70m 1 pcs. x 4.00m 1 pcs. x 4.00m 1 pcs. x 4.14m 1 pcs. x 4.26m 1 pcs. x 4.54m 1 pcs. x 4.57m 1 pcs. x 4.64m 1 pcs. x 4.72m 1 pcs. x 4.76m 1 pcs. x 4.87m 1 pcs. x 4.97m 2 pcs. x 5.00m 15 pcs. x 5.00m 1 pcs. x 5.06m 1 pcs. x 5.14m 1 pcs. x 5.14m 1 pcs. x 5.41m 1 pcs. x 5.59m 16 pcs. x 6.00m Turnouts: Left 14 and right 26 Curves: in various angles and radi: 30 pcs. Climbing drives: 2 pcs. Horizontal drives with matching curves: 2 pcs. The displayed price is not the total price, it is the product price Optionally available: Supports Side guides All prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply get in touch with us. Just contact us by phone or by mail. Our complete product range can also be found on our website with customized filter option We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team of Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, OMNIFLO Overhead conveyor system Linear guide Transport Schönenberger Complete system for hanging goods RA1994 Fsdpjvmqckefx Alqopg Manufacturer: Schönenberger Various components available: Straight sections can be optionally shortened: 1 pcs. x 1.00m 1 pcs. x 1.18m 1 pcs. x 1.52m 1 pcs. x 1.54m 1 pcs. x 1.54m 1 pcs. x 1.74m 6 pcs. x 1.80m 1 pcs. x 1.84m 1 pcs. x 2.05m 1 pcs. x 2.25m 7 pcs. x 2.28m 1 pcs. x 2.46m 2 pcs. x 2.50m 1 pcs. x 2.50m 1 pcs. x 2.60m 1 pcs. x 2.79m 5 pcs. x 3.00m 1 pcs. x 3.00m 1 pcs. x 3.34m 1 pcs. x 3.50m 4 pcs. x 3.64m 1 pcs. x 3.66m 1 pcs. x 3.70m 1 pcs. x 4.00m 1 pcs. x 4.00m 1 pcs. x 4.14m 1 pcs. x 4.26m 1 pcs. x 4.54m 1 pcs. x 4.57m 1 pcs. x 4.64m 1 pcs. x 4.72m 1 pcs. x 4.76m 1 pcs. x 4.87m 1 pcs. x 4.97m 2 pcs. x 5.00m 15 pcs. x 5.00m 1 pcs. x 5.06m 1 pcs. x 5.14m 1 pcs. x 5.14m 1 pcs. x 5.41m 1 pcs. x 5.59m 16 pcs. x 6.00m Turnouts: Left 14 and right 26 Curves: in various angles and radi: 30 pcs. Climbing drives: 2 pcs. Horizontal drives with matching curves: 2 pcs. The displayed price is not the total price, it is the product price Optionally available: Supports Side guides All prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply get in touch with us. Just contact us by phone or by mail. Our complete product range can also be found on our website with customized filter option We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team of Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics