Used Saro Sbf 7/3000 for sale (30,825)

Condition: ready for operation (used), Year of construction: 1984, functionality: fully functional, spindle bore: 250 mm, Oil country lathe SARO SBF 7/3000 Max. diameter: 700mm Tsdpfx Aozt Irxomrjc Spindle hole: 250mm Turning length: 3000mm ✅ Working condition ✅ New electrical panel ✅ Full documentation

Condition: good (used), Equipment: foot remote control, The rotary table is motor-driven and features a foot switch; the clamping range can be adjusted to suit any component. Upon request, a perforated table of any size can be supplied. Tjdpjz Hvl Rofx Amrec 3000 kg load capacity, motor-driven braking system. One side is driven, the other side rotates passively. Center height from the floor: 1000 mm, mounting plate size: 700 x 450 mm. Two sets of the same size are available.

Condition: used, Year of construction: 2004, functionality: fully functional, input voltage: 400 V, compressed air connection: 6 bar, year of last overhaul: 2026, overall weight: 3,500 kg, input frequency: 50 Hz, Equipment: documentation/manual, Hello, we are offering a Thieme 3000 SL screen printing machine that has been completely and thoroughly overhauled in our workshop. The maximum printing format of this 3/4 automatic machine is 4000 mm x 1500 mm! The machine features a large, very robust vacuum table (with two vacuum pumps) on which the printing material is positioned against stops. After the printing process, the material is picked up by a gripper and placed onto an underlying conveyor belt. The conveyor belt can be mounted on either the left or right side, depending on the local conditions. The system has the patented Thieme squeegee system with three printing cylinders and two flood cylinders. Control is via a Mitsubishi E600 display. The system was completely disassembled and reassembled in our workshop. All wear parts and maintenance parts have been replaced. The control cabinet has been powder-coated. The side panels have been replaced with robust HPL panels. All air hoses have been replaced, contactors have been reconditioned, bearing bushings have been replaced, etc. The system is assembled and located in our warehouse in 93476 Blaibach and can be viewed/tested there while powered and connected to an air supply. We can gladly handle transport and on-site assembly. If you have any questions, please do not hesitate to contact us. Tjdpjzyc Rijfx Amrjc

Year of construction: 2002, condition: ready for operation (used), Ilapak Delta 3000 Stainless Steel Flow Wrapper With gas flush facility In current daily use Ready for removal Sealing bar is 250mm wide Tedpoy Rvfqofx Amrsc See video attached Price € 7,500 We can organise shipping / delivery for you.

Condition: ready for operation (used), Year of construction: 1985, LATHE SPA 710x10000 Chuck diameter: 710 mm Tsdjwywlkepfx Amrec Max turning over cross slide: 480 mm Distance between centers: 10,000 mm Spindle bore: 105 mm Main motor: 10 kW Weight approx.: 12 t Video of the machine under power available!

Condition: used, MULTIHEAD TUBE CUTTING MACHINE MAIR TRA3000/7/8 Scope of supply: 1 Loading table with: - Motorised slings loader, to load the complete bundle - Lateral chain transport conveyor, to introduce the tube 1 by 1 - Top support with vertical adjustment (to avoid loading of 2 tubes when working with small diameters) Todsymaw Uepfx Amrjc - Length stop and tube loader 2 Cutting machine TRA3000 with: - 7 independent cutting heads - All cutting heads can be lifted independently - Linear guide with scale for positioning of the cutting heads - Centralised tube transport system with production cycle adjustment 3 Double collecting cradle RA3, with: - Independent cradles, to collect the cut tubes - Lateral separators between cradles, to adapt the cradle length to the tube length - Motorised endless slings for soft tube collection. Note: with the double craddle system, it is possible to make the bundling and strapping in collecting craddle nº1, while production continues, without machine stop. 4 Main electrical cabinet and operator control panel NOTE:  This machine has worked very few hours.  Mechanical condition is very good.  It only requires cleaning & repainting to be “as new” Max. input tube length: 8000 mm Bundle Loader: 3 Tn Max. loading capacity: 3000 Kg Round tubes (outer Ø): 12-60 mm Square tubes (HxW): 12x12-40x40 mm Rectangular tubes (HxW): 12x16-50x30 mm Thickness Min.-Max.: 0.8 - 3.0 mm (depending on yield) Cutting lengths: 330 - 7900 mm Max. straightness tolerance: 1 mm/m Number of cutting heads: 8 Motors power: 2.2 kW Cutting disc diameter: 300 mm

Condition: good (used), functionality: fully functional, Year of construction: 2017, laser power: 3,000 W, X Working area max.: 2500 mm Y Working area max.: 1250 mm Control system: Basic Rexroth IndraMotion MTX Laser power: 3000 watts Standard equipment: Machine - Closed machine frame - Hybrid axis system - Linear magazine with 20 slots for clamping jaws and tools - Drives with maintenance-free three-phase motors - Follow-up device with programmable clamping beam - Foot pedal for clamping jaw closure - Beam protection - Dividing chute on the right - Part flap on the left - Sensor for part flap - Work area lighting - FocusLine - Protective tool TRUMPF Laser - Solid-state laser TruDisk 3001 with one laser beam cable (LBC) output - LBC according to standard layout (10 m) - Laser power control - Laser logbook function - Enclosed beam guidance via laser beam cable (LBC) The TruDisk laser is subject to international export control. According to EC Dual-Use Regulation 428/2009 (lasers covered under 6A005). Compact cutting unit - Solid-state laser compact cutting unit - Protective glass - Collision protection - ControlLine Punch head - Delta Drive - Rotatable mono-tool holder - Programmable clamping beam position - Tool length compensation - Spray lubrication for the punch - Scrap extraction - Forming function - Stroke counter for the punch Control system - TRUMPF control system based on Rexroth IndraMotion MTX - Touch panel with 19'' TFT color display - Integrated technology data - Programmable cutting gas pressure - Teleservice interface via Internet - Automatic shutdown including wake-up function - Program management - Production plan Data transfer - USB interface - RJ45 network connection - Central Link Safety - CE marking - Multi-beam light curtains - Protection against scattered radiation Extended laser equipment - Copper cutting package - Brass cutting package Extended punching equipment - MultiTool function - MultiBend function - Thread forming function with thread counter - Signing/fast beading function - Engraving function - Deburring and rolling technology function - Adaptive stroke calibration - Spray lubrication for the die and level monitoring - Smart Punch Monitoring Part removal - Integrated sorting function for dividing chute - Sensor for dividing chute - Container track for 4 standard containers - Containers supplied by the customer Special sheet metal processing - Brush tables - Loading and unloading aid for brush tables Options Compact dust collector - CO2 extinguishing system for the compact dust collector Data transfer - Wireless operation point SheetMaster Compact 2500x1250mm (AK05) - Suction frame - Unloading trolley for scrap grid and microjoint sheets - Loading station with spreader magnet for separating sheets - Double sheet detection - Vacuum sensor - 2nd operator station for loading and unloading - Compact installation (double-wing swing doors) - Peeling system Tsdpszy Hpiofx Amroc

Condition: excellent (used), WEBO 4-Headed Table Multi-Spindle Drill 4×0.75 kW 200–3000 rpm Tjdpfx Amozkmfxjroc

Condition: good (used), Year of construction: 2018, Recycling technology, agglomerator, high-performance mechanical dryer, dry cleaner, plastic recycling machine, drying system -Handover: in its current condition as inspected -Condition/Scope of delivery: untested, as shown in the pictures Tedpoztnduefx Amrec -Manufacturer: WIPA, Dry Cleaner Mechanical High-Performance Dryer -Type: MD 1250-3000/90/0.75/3R -Drive motor: 90 kW -Drum length: 1800 mm -Sieve: Perforation Ø 5 mm -Dimensions: Dryer 4475/2140/H2630 mm / Control cabinet 1200/660/H2195 mm -Weight: 8400 kg / 340 kg

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 3,000 rpm, travel distance X-axis: 280 mm, travel distance Z-axis: 820 mm, overall weight: 6,000 kg, number of slots in tool magazine: 12, number of axes: 3, Horizontal turning machine manufactured in 2008. This MORI SEIKI NL 3000 MC/700 features a maximum turning diameter of 430 mm and a turning length of 713 mm. It includes a 12-station turret for efficient tool changes and operates at a spindle speed of 3000 rpm. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI NL 3000 MC/700 machine we have for sale. Contact us for further details. - Chuck: 12" (3-jaw chuck)- Max Turning Diameter: 430 mm- Swing Over Bed: 978 mm- Turning Length: 713 mm- Phase: 3 Phase- Frequency: 50 Hz- Voltage: AC 200 V- Full Load Current: 133 A- Current Rating of Spindle Motor: 300 A- Short Circuit Current: 1 kA (220 V Maximum)- Rated Power: 46 kVA- Machine Dimensions: 3,400 mm x 2,089 mm x 2,270 mm- Optional Accessories/Equipment: Tooling, chip conveyor, accessories/manuals available Technical Specification Tjdpfxozwxzxo Amroc Counter Spindle No Driven Tools Yes

Year of construction: 2009, condition: ready for operation (used), travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,000 mm, total width: 9,000 mm, total height: 4,100 mm, product length (max.): 4,700 mm, spindle speed (max.): 1,450 rpm, number of axes: 3, This 3-axis DYE RHE -3000 Bed Type Milling Machine was manufactured in 2009. It features a substantial table surface of 1000 × 3000 mm, with longitudinal travel of 3000 mm and transverse travel of 1500 mm. The machine is equipped with a grinding wheel diameter of 450 × 80 mm and a spindle speed of 1450 rpm. If you are looking to get high-quality milling capabilities, consider the DYE RHE -3000 machine we have for sale. Contact us for further details. • Table surface: 1000 × 3000 mm • T-slots: 7 × 22 mm • Distance between T-slots: 130 mm • Longitudinal travel: 3000 mm • Transverse travel: 1500 mm • Vertical travel: 1000 mm • Vertical stroke: 300 mm Tedpfoz Hwkbjx Amrec • Grinding wheel diameter: 450 × 80 mm • Motor power: 10 HP • Control/display: Fagor NV300-6V • Machine dimensions: 4700 × 9000 × 4100 mm • Prism head: CTM 90 × 370 • Prism head speed: 3000 rpm • Prism head motor power: 3 HP • Condition: Machine in operation Additional equipment • Balancing parallels • Wheel holders with grinding wheels • Coolant tank with paper filter • Hydraulic diamond dressers on head

Condition: used, MULTIHEAD TUBE CUTTING MACHINE MAIR TRA3000/7/7/CAR + RA1 SCOPE OF SUPPLY 1 Loading table with: - Motorised slings loader, to load the complete bundle - Lateral chain transport conveyor, to introduce the tube 1 by 1 - Top support with vertical adjustment (to avoid loading of 2 tubes when working with small diameters) - Length stop and tube loader 2 Cutting machine TRA3000 with: - 7 independent cutting heads - All cutting heads can be lifted independently - Linear guide with scale for positioning of the cutting heads - Centralised tube transport system with production cycle adjustment 3 Single collecting cradle RA1, with: - Independent cradles, to collect the cut tubes - Lateral separators between cradles, to adapt the cradle length to the tube length - Motorised endless slings for soft tube collection. 4 Main electrical cabinet and operator control panel 5 Safety barriers around the machine & photelectric barriers & emergency line. Note: Safety barriers were installed by owner to have the machine under “safety conformity” TECHNICAL SPECIFICATIONS Manufacturer: MAIR Model: TRA 3000/7/7/CAR +RA1 Yearly maintenance: made by MAIR Spain Max. input tube length: 7000 mm Bundle Loader: 3 Tn Max. loading capacity: 3000 Kg Round tubes (outer Ø): 12-60 mm Square tubes (HxW): 12x12-50x50 mm (see note) Rectangular tubes (HxW): 12x16-60x40 mm (see note) Thickness Min-Max.: 0.8 - 4.0 mm (depending on yield) Cutting lengths: 330-6900 mm Max. straightness tolerance: 1 mm/m Number of cutting heads: 7 Motors power: 2.2 kW Cutting disc diameter: 300 mm Tedpfx Amsymax Ejroc Voltage: 380 / 50 V/HZ, 3 phases Compressed air: It must be supplied filtered and lubricated 6 bar Total installed power: Aprox. 21kW – 50Amp Manufacturer: MAIR Model: TRA 3000/7/7/CAR +RA1 Yearly maintenance: made by MAIR Max. input tube length: 7000 mm Bundle Loader: 3 Tn Max. loading capacity: 3000 Kg Round tubes (outer Ø): 12-60 mm Square tubes (HxW): 12x12-50x50 mm (see note) Rectangular tubes (HxW): 12x16-60x40 mm (see note) Thickness Min-Max.: 0.8 - 4.0 mm (depending on yield) Cutting lengths: 330-6900 mm Max. straightness tolerance: 1 mm/m Number of cutting heads: 7 Motors power: 2.2 kW Cutting disc diameter: 300 mm Voltage: 380 / 50 V/HZ, 3 phases Compressed air: It must be supplied filtered and lubricated 6 bar Total installed power: Aprox. 21kW – 50Amp

Condition: used, Year of construction: 1996, functionality: fully functional, turning diameter: 710 mm, turning length: 3,000 mm, Universal lathe FAT Poland Model: TUR 710 x 3000 Year of manufacture: 1996 Accessories: Digital readout Tedpfxexxm A Hs Amroc 3-jaw chuck Tool holder Steadies Live centre

Condition: new, Load Weight Shelf 28000 kg Loading weight per level 2000 kg Number of load levels 2 x 7 Stk. Recommended material length 6000 mm Column width 3000 mm Shelf height 2440 mm Tedpfx Amjfgyhaorsc dimensions 3,7 x 2,55 x 2,4 m

Condition: excellent (used), Year of construction: 2020, clamping force: 300 kN, Clamping force: 300 t Screw diameter: 60 mm Distance between tie bars V: 720 mm Distance between tie bars H: 720 mm Type: Horizontal Drive: Hybrid Hours: 23000 core puller 1 Tedpsyfh Rmofx Amrsc pneumatic core puller controll euromap 67 2 servo pumps. machine is without robot and accessories.

Condition: used, functionality: fully functional, Year of construction: 1985, operating hours: 27,150 h, machine/vehicle number: 2723007, control type: NC control, actuation type: hydraulic, working width: 3,000 mm, sheet thickness (max.): 4 mm, overall weight: 5,500 kg, total length: 4,000 mm, total width: 2,500 mm, total height: 1,700 mm, number of support arms: 3, Equipment: angle stop, documentation/manual, type plate available, This machine is still in use in the factory during the manufacturing process and is ready for demonstration immediately. Tjdpezud Ekefx Amrjc

Condition: used, Year of construction: 2008, MECOS 7-AXIS PRESS BRAKE Model SYNCRO 135/3000 Year 2008 Weight kg 13,000 Dimensions mm 4820x2500 H 2850 CNC ESA FEATURES Type of press brake: Hydraulic, Synchro, 7-axis Tedpsz Dwkpefx Amroc Maximum force: 135 tons Maximum distance between uprights: 450 mm Maximum stroke: 200 mm Approach speed: 200 mm/s Working speed: 0 ÷ 10 mm/s Return speed: 130 mm/s Back gauge stopping distance: 11 mm Laser safety distance – punch: 16 mm Voltage: 400 V Electrical power supply: 50 Hz Phases: 3 Motor power: 15 kW Tank capacity: 200 liters Maximum pressure in hydraulic circuit: 310 bar Length of lifting cables: 2 m Noise level at operator station: 64 dB(A) Machine complete with operating manual and a copy of the CE declaration of conformity. All technical data provided are indicative and may be subject to change without prior notice; therefore, they should not be considered binding.

Condition: excellent (used), For sale: Professional industrial extraction unit by TEKA, model STRONGMASTER BIA, designed for welding fume extraction and air pollution control. ‼️ VERY LOW HOURS – ONLY 1,550 OPERATING HOURS (this is rare for this type of equipment) ⚙️ Technical specifications: Manufacturer: TEKA (Germany) Model: STRONGMASTER BIA Capacity: 3,000 m³/h Max. negative pressure: 2,500 Pa Motor power: 1.1 kW Power supply: 400V (3PH + N + PE) Frequency: 50 Hz Rated current: 2.5 A Protection class: IP54 Control voltage: 24V Weight: approx. 130 kg 🔧 Equipment: Flexible extraction arm Industrial filter Control panel Operating hours counter Mobile chassis with wheels 🔍 Condition: Tjdpfxsyz Dile Amrsc Used equipment, in good technical condition. Normal signs of use visible. ✅ Low hours – only 1,550h ➡️ Equipment is only lightly used ➡️ Significant potential for further operation

Condition: good (used), Technical data for the shelf rack: Shelving system: SSI Schäfer Type: R 3000 Technical data for installation: Number of shelving rows: 01 pc Shelf length: 47,330 mm Number of bays per shelving row: 29 pcs Scope of delivery: 30x shelf upright frames, used Material finish: sendzimir galvanized Design: slotted Adjustment grid: 26.5 | 26.5 mm Frame profile dimensions: 31x60x0.88 mm Weight / pc.: approx. 8.92 kg Incl. cross braces and base plates (upright frames are pre-assembled) 2,490 mm high 600 mm deep 174x shelves, used Material finish: sendzimir galvanized for upright depth: approx. 600 mm Total width: approx. 1,600 mm Total depth: approx. 594 mm Height: approx. 30 mm Weight / pc.: approx. 8.12 kg Max. load per shelf 75 kg, with evenly distributed load. 696x shelf supports, used Suitable for smooth uprights Material finish: sendzimir galvanized 10x cross bracing, used Type designation: KV31313 Weight / pc.: approx. 0.405 kg Material finish: sendzimir galvanized 01x load sign with information on bay and shelf loading, manufacturer and commission number Dimensions: 297 x 210 x 2 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information on the item: Tsdpsy Enpqjfx Amrsc This item is offered for collection only. If transport or shipping is required, additional costs will apply, which can be requested from us separately depending on the delivery location and scope of delivery.

Condition: excellent (used), For sale is a professional Dr. TRESKY AG T-3000-FC3 station, manufactured by a renowned Swiss company. This is a high-quality laboratory device designed for the precise assembly and positioning of semiconductor structures (Die Bonding / Flip-Chip Assembly). It is used in research laboratories, as well as in the production of electronics, photonics, optoelectronics, and microelectronics. The T-3000-FC3 model is one of the most versatile platforms from Tresky and enables the execution of both basic and advanced assembly processes. Technical specifications: Manufacturer: Dr. TRESKY AG Model: T-3000-FC3 Country of manufacture: Switzerland Type: manual Die Bonder / Component Placer FC3 Bond Force Control controller Olympus SZ51 stereoscopic microscope Precision XY table Bond force control Tjdpfx Aszi Upcemrjc Vacuum and pneumatic system LED work lighting Documentation included Numerous working tips, holders, and accessories as shown in the photos Applications The device is used for: assembly of semiconductor devices (Die Bonding), Flip-Chip technology, assembly of MEMS components, production of photonics and optoelectronics, assembly of VCSEL lasers, assembly of sensors and hybrid circuits, research and development work and prototyping. Condition The device is sold with extensive equipment as shown in the photos: Olympus microscope, FC3 controller, documentation, drawers with accessories, set of tools and working tips, pneumatic components and accessories. The visual condition is very good. It is sold exactly in the configuration shown in the photos.

Condition: used, suitable for thermal oil heating (= 131 kW) 9 kW with lower and upper belt with Teflon infeed belt 1.200 mm extra product infeed belt outfeed belt suitable for fire protection suitable for CIP-cleaning frying length 3.000 mm belt width 700 mm adjustable speed Todpfx Ajz Dvcdjmrjc oil circulation pump oil level control sediment removal system filter lifting unit with hoists dimensions (l x w x h) : ± 6.850 mm x 2.000 x 3.400 mm

Year of construction: 1978, condition: ready for operation (used), A Haeusler CNC large-format 4-roll plate bending machine is available. Number of rolls: 4, Roll width: 3050mm, Max. prebending plate width: 3000mm, Max. prebending plate thickness: 60mm, Max. rolling capacity at max. plate width and 3500mm bending diameter: 70mm, Roll diameter top/bottom/side: 620mm/600mm/500mm, Max. top roll load: 12000kN, Operating speed: 4m/min, Connected load: 132kW, Weight: approx. 85t. Including cone bending device. Documentation available. An on-site inspection is possible. Tsdpfx Amozka H Aorsc

Condition: good (used), turning diameter over cross slide: 870 mm, spindle bore: 162 mm, turning length: 3,000 mm, turning diameter: 870 mm, center width: 3,000 mm, Distance between centres: 3000 mm Swing: 870 mm over bed, 560 mm over cross slide Weight between centers: 3.600 kg without steady 4.400 kg with 1 steady 5.600 kg with 2 steadies Spindle speeds: 0 - 900 Rpm Spindle bore: 162 mm CNC Controller: Fagor Featured with: - Additional chuck at back end of main spindle (oilcountry) - 1 fixed steady Ø420 mm - 1 moving steady - 4-jaw chuck Ø800 mm - 3-jaw chuck Ø 400 mm - 10 Toolholders - Coolingpump/chiptray at back end - Machine documentation Todpfxjw Sm U De Amrjc Country of origin: Spain Motor power: 30 kW Machine weight: 9.000 kg Machine LxWxH: 5,1 x 2,4 x 2,0 mtr.

Condition: ready for operation (used), Year of construction: 2003, A self-cleaning disc stack centrifuge (disc separator) GEA is available. Drum speed range: 4000-4800rpm, drum diameter: 682mm, max. feed density liquid/solids: 1.1kg/dm³/1.3kg/dm³, drum volume: 125l. An on-site inspection is possible. Todpfoydpz Dox Amrjc

Condition: used, Year of construction: 2012, Dematic conveyor system Accumulating roller conveyors Roller conveyor 3000-600-540, 750 RA2290 Manufacturer: Dematic Type: Drive unit accumulating roller conveyor Year of construction: 2012 Condition: good (used) Roller width (RB): 540 mm Element length: 3000 mm, optionally shortenable Stowage space size: 750 mm Tsdotp Tv Topfx Amrsc Roller pitch: 62.5-125 mm variable Drive types: Head and center drive Weight of conveyed goods: up to 30 kg Technical data: SEW geared motor 380V RA2290.1 Manufacturer: Dematic Type: Accumulation roller conveyor extension module Year of manufacture: 2012 Condition: good (used) Roller width (RB): 540 mm Element length: 3000 mm, optionally shortenable Stowage space size: 750 mm Roller pitch: 62.5-125 mm variable Drive types: Overdrive from RA2290 (necessary) Weight of conveyed goods: up to 30 kg Optionally available e.g: SEW Eurodrive / Movimot frequency inverter Supports Side guides Price: on request plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics