Used Salvagnini Sheet Metal Folder for sale (37,256)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1985, machine/vehicle number: 8444-08, workpiece length (max.): 6,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum edge length: 6,000 mm Maximum material thickness: 1.25 mm Mechanical cutting device Hydraulic unit Flow rate of gear pump: 14.5 l/min Operating pressure: 140 bar Maximum pressure: 210 bar Electric motor power: 3 kW Motor speed: 1,450 rpm Voltage: 380 V Frequency: 50 Hz Oil tank capacity: 30 l Pressure gauge diameter: 63 mm Pressure gauge display range: 0–250 bar Pressure switch: 90 bar Hydraulic components Gear pump CPL 9 DQ Intermediate flange L25-2/004 Elastic coupling G 228/2P Return filter Fill and vent filter Oil level indicator Drain plug Glycerine pressure gauge Valve block with pressure, flow control, braking, and solenoid valves Hydraulic cylinders Number of hydraulic cylinders: 8 Type: GHZ-50 × 225-S spec. Piston rod with external thread M20 Length: 20 mm Swivel bearing at the rear Hydraulic motors Number of hydraulic motors: 4 Type: OMP 50 Nwedpfx Aezy Ndcsf Sjl MACHINE DETAILS Control system Electrical machine control with operator panel (OP) Adjustable dwell times, angle ranges, and shutdown delays Variant control for different machine functions EPROM-based control Electrical supply Mains voltage: 380 V Frequency: 50 Hz EQUIPMENT Hydraulic unit OP-14 SM 8 hydraulic cylinders GHZ-50 × 225-S spec. 4 hydraulic motors OMP 50 Gear pump CPL 9 DQ Valve block with hydraulic valves Return filter Fill and vent filter Oil level indicator Glycerine pressure gauge Pressure switch Electrical OP control Hydraulic and electrical circuit diagrams

Condition: good (used), You are bidding on: a branded device – a press brake, from a very good and well-known manufacturer – Schechtl. Features of the device: Press brake Schechtl MA 200 / 6 The bending beam bends cleanly – testing is possible. Angle adjustment for up to 6 bending steps (if only 2-3 or, for example, 4 are needed, simply set it to the desired number). Ideal for series bending. The machine was used by a carpenter. Bending length slightly over 2m. Sheet thickness: 2 mm iron – sheet – aluminum, zinc, etc., up to approx. 3 mm. Standard bending beam – radius for aluminum, zinc would also be available as an option, as would an extension and special bending beam! Foot pedal for operation. Optional depth stop. Sheet metal shear HT 200, or MT (see picture) – or sheet metal shear Schröder electric 2m – 2.5mm would be optional, but not included in the price – the offer can be adjusted. Important! You can optionally find and purchase many machines and machine accessories, such as various bending beams, depth stops – everything related to sheet metal and steel processing, such as press brakes, sheet metal shears, drilling machines, circular machines, slitting and profiling machines – accessories (beading device, round rollers for gutter production, back gauge, etc.), as well as other hand tools and spare parts from many top manufacturers in our shop. I am always available to answer your questions. You will receive an invoice according to § 25 a UStG; the VAT is included in the invoice amount. Differential taxation. Free loading is possible – weight approx. 1700 kg. Inspection and testing are possible and desirable after arranging an appointment by telephone. Payment in cash upon collection. Take advantage of our experience and expertise; we will be happy to advise you. Nodezzff Sepfx Af Sjwl Collection by the buyer himself (or by a forwarding agent commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97249 Eisingen, approx. 3 minutes from the A3 and A81 motorways. Article number: Press brake MA 200 / 6

Condition: new, functionality: fully functional, Year of construction: 2026, Equipment: CE marking, documentation/manual, Technical data: Working width: 2540 mm Maximum sheet thickness: 2.5 mm Maximum bending angle: 135° Length: 2880 mm Width: 1020 mm Height: 1450 mm Nsdpfxsytparj Af Sowl Weight: 1300 kg Delivery to the customer is possible. The delivery cost is determined individually according to the quotation of the transport company. If you are interested in other machines, we encourage you to visit our website.

Condition: excellent (used), Hydraulic folding machine by Schröder Group, model SCHRODER-FASTI 215-40-4 Nodpfx Aoygv S Ujf Sewl A proven, robust industrial machine for precise bending, folding, and profiling of sheet metal. Despite its age, the machine operates flawlessly, delivering precise and clean results. Technical Data Machine type: Folding machine / hydraulic shear & folding machine Manufacturer: SCHRODER-FASTI Model: 215-40-4 Control: FASTI-matik 4000 (CNC) Max. sheet thickness: 4 mm (at 400 N/mm²) Working length / reference dimension: approx. 2,000 mm Stroke of upper beam: 350 mm Motorized adjustment of bending beam: 80 mm Motorized adjustment of lower beam: 80 mm Motor power for adjustments: 0.75 kW Features - Motorized adjustment of bending and clamping beams - High clamping pressure speed - Robust, adjustable bending options - FASTI-matik 4000 CNC control - Segmented/finger rails Tools / rails: Flat rail: 18 mm Medium rail: 45° Reinforcing rail: 36 mm Finger size: 150 mm - High repeat accuracy - Fast setup times - Proven FASTI quality "Made in Germany" Condition: Used Technically tested, fully functional, and ready for immediate use Delivery time: immediate Shipping terms: ex works, loaded free of charge Loading: possible by forklift or crane Transport / forwarding: can be arranged

Condition: good (used), Swivel bending machine, a press brake from the renowned manufacturer Schröder. Capacity: 3mm steel, aluminum, etc., and more. Nwjdpfez Ad Rvsx Af Sjl Working width: approximately 2.04m. Weight: approximately 2.4 tons. Easy to operate. Manual and foot controls. Optionally, a segmented upper beam or a back gauge is available. The machine comes from private use. Loading with a forklift is no problem. On-site testing is, of course, possible. You will receive an invoice according to §25a UStG – the VAT is included in the invoice amount. Subject to differential taxation. Optionally, a matching plate shear, 2m, 3mm, is available – a set price is also possible. Other equipment and tools for sheet metal processing are available.

Condition: good (used), Thalmann Pico 1mm steel - 1.75mm aluminum The machine was recently inspected and adjusted by a professional. It is in perfect working order and ready for immediate use. It bends all angles precisely up to a length of 6 meters. The shears are sharp and cut electrically. The control is simple and includes a foot pedal. Testing under power is possible – a forklift is available on site. Nedpezyzz Tsfx Af Sjwl The machine is privately owned and is being offered here as a friendly service (facilitated sale). Private sale – near Heilbronn.

Condition: used, Year of construction: 2022, Technical specifications for the TZ 150 – 6.4 m S-Line model Usable working length: 6400 mm Insertion depth: 1250 mm Maximum upper die opening: 220 mm Maximum bending capacity: 1.50 mm steel sheet (400 N/mm²) Bending angle / precision: max. 143° / ± 0.5° Bending speed: from 0° to 140° in 2.0 s Nodpfxjz Epd Re Af Sswl from 140° to 0° in 1.9 s Depth gauge stroke: 5–1250 mm (5 + 1 stop unit) Depth gauge – tolerance range: ± 0.1 mm per series Electrical supply / protection: 400 V / 50 Hz, 20 A / 4.0 kW pump motor External dimensions / weight: L 7800 × W 2110 × H 1800 mm / approx. 5500 kg

Condition: used, functionality: fully functional, Year of construction: 1981, Motorized Swivel Bending Machine Manufacturer: KRAMER, Type: AMaut III 3000 x 2 mm Completely overhauled in 1981 Technical Data Manufacturer: KRAMER Type: AMaut III 3000 Year of Manufacture: Completely overhauled in 1981 Usable Length: 3000 mm Sheet Thickness: 2 mm Stroke: Dimensions: approx. L x W x H 4.2 x 0.90 x 1.5 m Equipment • Bending angle adjustment via potentiometer! • Manually adjustable crowning • Documentation Nsdez Eg Aqopfx Af Sewl All information is without guarantee. A demonstration is possible at any time in our showroom.

Condition: good (used), AK 200: The machine is equipped with: ✅ a foot pedal ✅ a shear bar ✅ a 10mm clamping bar ✅ Performance: 1mm steel sheet (also suitable for aluminum, copper, and zinc) Nsdpfx Afjz Dumhj Sowl ✅ Weight: approx. 750kg HS 200 The machine is equipped with: ✅ a back gauge ✅ extendable sheet metal support ✅ Performance: 1.25mm steel sheet (also suitable for aluminum, copper, and zinc) ✅ Weight: approx. 650kg Condition: • good technical condition • good optical condition

Condition: new, functionality: fully functional, Year of construction: 2026, control type: manual, degree of automation: manual, overall weight: 1,370 kg, total length: 2,880 mm, total width: 1,450 mm, total height: 1,100 mm, warranty duration: 12 months, Equipment: documentation/manual, Metal Technics Polska Professional CNC machines, lasers, and metalworking equipment We are a manufacturer and importer of high-quality metalworking machines. We supply proven technologies from Poland, Europe, and Asia—used by hundreds of companies across Europe. For over 15 years, we have focused on quality, precision, and reliability. Nsdpfxoy Htk Ne Af Sjwl SHEET METAL BENDING MACHINE – SEGMENTED BENDING MACHINE 2.5 × 2040 Technical Specifications: Working width: 2040 mm Max. sheet thickness: 2.5 mm Bending angle: 0° – 135° Dimensions: 2880 × 1450 × 1100 mm Weight: 1370 kg Machine Description: Rigid and durable steel construction Long operating levers enabling high force transmission Segmented clamping fingers on upper and lower beam for flexible bending lengths Counterweights on operating levers to reduce effort Eccentric clamping system for secure sheet holding Upper and lower beam made of high-quality steel

Condition: ready for operation (used), Year of construction: 1979, Immediately available ex-works: Nwsdoz D Ahyspfx Af Ssl Swivel bending machine, Lotze Type 161 / 2500 / 6 Year of manufacture 1979 Bending length 2550 mm Material thickness up to 6 mm Drive power 7.5 kW Weight 6 tons Price: EUR 5,500.00 (plus VAT) ex-works.

Condition: used, functionality: fully functional, Year of construction: 1983, Hand-operated swiveling bending machine Manufacturer: FASTI, Type: 205, 1020 x 2 mm Year of manufacture: 1983 Technical data Manufacturer: Fasti Type: 205 Year of manufacture: 1983 Usable length: 1020 mm Sheet thickness: 2 mm Stroke: approx. 200 mm Dimensions: approx. L 1.70 x W 0.50 x H 1.60 m Weight: approx. 750 kg Equipment - Swiveling upper die - Stroke approx. 200 mm - Various bending rails as shown in the photo All information is subject to change without notice. A demonstration can be arranged at our showroom at any time. Nedpfxjz Ah Apj Af Sewl

Condition: excellent (used), Bending machine Manual swing-beam bending machine Manufacturer: Gabro Box Folder Type: BF Bending capacity: 500 x 2 mm Steel: 1000 x 1.25 mm By using a split bending beam, boxes with the following dimensions can be produced: 1000 x 570 x 215 mm New price: 2733 Euros Length: 1200 mm Width: 750 mm Njdpfxezdp Hxs Af Sjwl Height with pallet: 1400 mm Weight with pallet: 155 kg

Condition: used, Year of construction: 2020, Technical specifications for the TZ 150 – 6.4 m S-Line model Usable working length: 6400 mm Insertion depth: 1250 mm Maximum upper die opening: 220 mm Maximum bending capacity: 1.50 mm steel sheet (400 N/mm²) Bending angle / precision: max. 143° / ± 0.5° Bending speed: from 0° to 140° in 2.0 s from 140° to 0° in 1.9 s Depth gauge stroke: 5–1250 mm (5 + 1 stop unit) Depth gauge – tolerance range: ± 0.1 mm per series Electrical supply / protection: 400 V / 50 Hz, 20 A / 4.0 kW pump motor Njdpfoz Epdwjx Af Sowl External dimensions / weight: L 7800 × W 2110 × H 1800 mm / approx. 5500 kg

Condition: good (used), functionality: fully functional, Year of construction: 2013, Used swivel bending machine by Schroder Model: SPB Evo 3200 4.0 UD Capacity: 3200 x 4 mm Upward and downward bending Year of manufacture: 2013 POS 3000 CNC control (graphical) Hydraulic upper clamping CNC backgauge with 4 finger types (standard, clamping, side clamping) Additional lower blade Nwedpfxsyhdz Tj Af Sel

Condition: excellent (used), Year of construction: 2019, Working length: 6400 mm Depth of recess: 1250 mm Bending capacity: 2.0 mm Width of segmented bending blade: 10 + 10 mm Nwjdpfjz A Sxxox Af Sjl Maximum bending angle: 143° Bending accuracy: ± 0.5°

Condition: good (used), functionality: fully functional, Year of construction: 2007, Used 2-meter swivel bending machine from Schroder Type: MAKV Capacity: 2050 x 2.0 mm POS 200 control system Year of manufacture: 2007 Nsdjzgtmzjpfx Af Sswl

Condition: used, Year of construction: 1992, control type: manual, degree of automation: manual, actuation type: hydraulic, controller manufacturer: Jorns, controller model: OP, working width: 6,000 mm, bending angle (max.): 145 °, number of axes: 5, sheet thickness (max.): 1 mm, sheet thickness steel (max.): 1 mm, total length: 6,800 mm, total width: 1,650 mm, Equipment: emergency stop, foot remote control, We are offering this used Jorns NL125-SM-OP-6 swiveling bending machine, manufactured in 1992. Nedpfx Aszmy Eqsf Sswl Manufacturer: Jorns Model: NL125-SM-OP-6 Year of manufacture: 1992 Condition: used Machine type: Swiveling bending machine If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), functionality: fully functional, We are offering this very well-maintained Fasti PC 4000 pivoting bending machine, 3 m long, with a segmented die and a back gauge. Manufacturer: Fasti Model: PC 4000 Condition: very good Year of manufacture: Category ID: 1470 Type ID: 1258 Machine type: Pivoting bending machine Part number: 7.0559 B For sale: 3 m sheet metal bending machine in good condition, with a back gauge and the option to mount the upper die as a segment. Various die adapters are also available. Nwodszxptbopfx Af Sol If interested, an upper tooling platform is also available for an additional 1,000 EUR to the machine price. If you have any questions or need more information, please feel free to send us a message or call us.

Condition: excellent (used), Schechtl MAE 400 CNC in very good condition, with electric depth stop. Price is negotiable. Nwjdpfoz Drv Hsx Af Ssl We ship worldwide. If you have any questions, please call us at:

Condition: excellent (used), Year of construction: 2019, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, controller model: BMS Multi Touch, working width: 4,010 mm, sheet thickness aluminum (max.): 2 mm, back gauge adjustment: CNC-controlled, back gauge: 985 mm, total width: 5,200 mm, input voltage: 400 V, input frequency: 50 Hz, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, We are offering this very well-maintained Sperr & Lechner BIEGEMASTER Dura 4.15 folding machine, year 2019. Nedpfx Afjy Sxayj Sowl Manufacturer: Sperr & Lechner Model: BIEGEMASTER Dura 4.15 Year of manufacture: 2019 Condition: Very good Category ID: 1472 Type ID: 1258 Machine type: Folding machine If you have any questions or need more information, please feel free to send us a message or call us.

Condition: like new (used), Year of construction: 2021, Machine data: TD 150 – 6.4 m S5 with DFT® technology Working length: 6400 mm Insertion depth: 1250 mm Width of bending jaws: 10 mm + 10 mm additional bar Nodpezzxb Hefx Af Sswl Maximum bending capacity: S = 20 mm, 1.50 mm steel sheet (Re 275 N/mm²) Capacity for 180° bending: 50% of the maximum bending capacity Maximum bending angle: 143° (1.0 mm 135° / 1.5 mm 130°) Bending accuracy: +/- 0.5° (using crowning) Number of clamps / clamp stroke: 7 units / 15 mm - 1250 mm Maximum clamp opening: 35 mm Conical backgauge with adjustable depth: multi-zone function Number of backgauge fingers / stroke: 7 units / 5 mm - 1150 mm Backgauge tolerance range: +/- 0.1 mm per repeatability set Electrical voltage: 400 V / 50 Hz / 3 phases + PE Rated current / protection / pump: 32 A / 63 A / 22 kW, 75 ccm Dimensions / weight: 8050 x 2250 x 2100 mm / approx. 10,000 kg

Condition: new, functionality: fully functional, Year of construction: 2026, bending angle (max.): 135 °, total length: 1,500 mm, total width: 350 mm, total height: 530 mm, warranty duration: 12 months, Manual Sheet Metal Bending Machine The bending machine allows the production of complex profiles and bends. Thanks to the segmental design, it is possible to perform advanced sheet metal forming operations. Our model features an improved construction – thanks to the simple and quick removal of segments, it is possible to bend channels, boxes and similar shapes. The segments on the upper beam are mounted with Allen screws. Tilting by means of a handle Upper clamping beam with a 45° apex angle Easy positioning of the upper clamping beam; removable segments for box bending The machine is equipped with a deflection compensation adjustment system (when bending thicker sheets it eliminates the so-called “banana effect”) Technical Specifications Working length: 1220 mm Maximum sheet thickness: 1.5 mm Maximum opening height: 30 mm Bending angle: 0–135° Nwedpfx Aeytfabof Sol Dimensions (L × W × H): 1500 × 350 × 530 mm Weight: 165 kg Segments: 5 × 50 mm / 6 × 76 mm / 5 × 102 mm SEGMENT SHEET METAL BENDING MACHINE 1220 × 1.5 MTP 165 KG Delivery Terms The machine is brand new 12-month warranty Warranty service Post-warranty service CE Declaration of Conformity Technical documentation (DTR) in English Delivery to the customer is possible. The delivery cost is determined individually based on the carrier’s quotation. If you are interested in other machines, we encourage you to visit our website.

Condition: used, max. working length: 3200 mm; max. material thickness: 3 mm for steel sheet Nwjdpfx Ajyrbqaef Ssl

Condition: excellent (used), You are bidding on: a branded machine - folding press, from a very reputable and well-known manufacturer - Schröder Machine features: Folding press Schröder AKV Rail bends cleanly – test possible Angle display Bending length just over 2m Sheet thickness: 2 mm (steel sheet); for aluminum, zinc, etc., up to approx. 3 mm Standard rail – optionally also available with segmented rail (see picture)! Optional back gauge Matching guillotine shear available, e.g., Schröder 2m/3mm (see last picture), or Schechtl HT, Ras, etc. Current new price is approx. €20,000 net without accessories Important! Optionally, you can find and purchase many machines and machine accessories such as various rails, back gauge – everything related to sheet metal and steel processing, including folding presses, guillotine shears, drilling machines, slip rollers, slitting and profiling machines, accessories (beading tools, roll formers for gutter production, back gauge, etc.), as well as other hand tools and spare parts from many top manufacturers in our shop. I am always available for any questions. You will receive an invoice according to § 25a UStG. Nwjdpfjy Hbv Tex Af Sol Free loading is possible – weight approx. 1550 kg. Viewing and testing are possible and encouraged by telephone appointment. Payment in cash upon collection. Benefit from our experience and expertise; we will be happy to advise you. Collection by the buyer (or a forwarding agent commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97249 Eisingen, approx. 3 minutes from the A3 and A81 motorways. Item number: Folding Press Schröder AKV 260401