Used S.a.r.l Constructeur 90 To. for sale (20,410)

Condition: excellent (used), Hydraulic straightening press Brand: S.A.R.L. Constructeur Capacity: 90 t Maximum installation height: 1000 mm Stroke: 450 mm Rsdpeywh Dfefx Aahsw Table diameter: 600 mm Internal width: 1000 mm 380 Volt Year of manufacture: 2007 Transport dimensions: Length: 1600 mm Width: 650 mm Height: 2430 mm Weight: 900 kg

Condition: new, mileage: 500 km, power: 382 kW (519.37 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, MAN TGS 33.520 BL 6x4 CH chassis cab – new vehicle with day registration, 33t variant, 6x4 drive, wheelbase 3.60 m, 520 hp, with PTO, air conditioning, auxiliary heater, trailer coupling with 50 mm pin, manufacturer’s warranty, and much more. MAN manufacturer warranty valid until 16/12/2026 MAN ATS warranty valid until 16/12/2027 Commercial tonnage: 33 tonnes Permissible gross weight: 26,000 kg Permissible total vertical load (Tech. Plus): 28,000 kg Mileage approx. 1,335 km (transfer mileage) Medium height design Short NN cab Diesel engine with 382 kW (520 hp) output and 2,650 Nm torque 6x4 drive Wheelbase 3,600 mm, 800 mm rear overhang Differential locks on rear axles MAN TipMatic 12.28 OD automatic transmission PTO, gearbox-dependent, type NTX/10c, without flange, f=1.15, position approx. 3:30 o’clock High-performance engine brake MAN EVBec, multi-stage Transmission function MAN EfficientRoll Transmission function rocking/free-swinging Transmission function MAN Idle Speed Driving Transmission for increased push/pull share in driving operation MAN TipMatic driving programs: Performance and Efficiency up to 70,000 kg MAN TipMatic driving program: Offroad up to 70,000 kg MAN TipMatic Manoeuvre mode, shunting function Creeper function MAN EasyStart MAN ComfortSteering system Full brake assist Emergency brake assist EBA Lane Departure Warning LDW Driver alert system MAN AttentionGuard Offroad ABS with additional terrain logic EBS, ASR, ESP Front axle leaf sprung, rear axles air suspended Front axle: 9,000 kg, Rear axle: 13,000 kg Front axle spring capacity: 9,500 kg Stabilisers and shock absorbers on front and rear axles Axle ratio i=4.00 Trailer coupling ROCKINGER type 500 G 6B for trailer load up to 24,000 kg (Tech. Plus) Permissible gross combination weight (Tech. Plus): 44,000 kg Climatronic 4 kW water auxiliary heater Cruise control Multifunction steering wheel Sun visor Roof hatch 2 LED work lights behind cab roof Rjdpsx I T Tgsfx Aahjw 2 beacons on cab roof LED daytime running lights LED rear lights and side marker lights 2 LED contour lights and side indicators Electrically adjustable and heated exterior mirrors Electric windows MAN EasyControl operation panel, 4 functions, operable from outside with door open Air-suspended and heated driver comfort seat Comfort seat covers Smartphone integration MAN Sound System Advanced MAN Media System Advanced Navigation 7 inch New vehicle, day registration on 16/12/2025, with MAN manufacturer's warranty Net price plus 19% VAT. Attractive financing offers available on request. All information provided without guarantee. Subject to error and prior sale. Internal vehicle number: 2571

Condition: good (used), Year of construction: 2009, Clamping force: 90 t Screw diameter 1 : 30 mm Screw diameter 2 : 25 mm Type: Multicomponent Drive: Hydraulic Rsdpfx Aszg Ib Teahow

Condition: ready for operation (used), ABB Robotics PS 90/6-79-P-LSS-4318 / 3 HAC 2848-1/1 motor SN: 004.8561610017, used, in good condition, 100% fully functional, scope of delivery as per photos. Rodpfx Aajxtv Twehew

Condition: ready for operation (used), Küenle Antriebstechnik ZG 1 DK 90 S 4 gear motor SN:3099341341, used, normal signs of use, 100% functional, scope of delivery as per photos Rjdpfxsudgh Ee Aahew

Condition: ready for operation (used), Emod, type VKM64/23-90 3~ motor, motor no. 7885881, 0.65 kW, 8450/min, used, in good condition, 100% functional. Redpfji D Huzox Aahjw

Condition: ready for operation (used), ABB Robotics / API Elmo PS 90/6-38-P-LSS-3822 servo motor, serial number: 910.8106120-071, used, shows normal signs of wear, 100% functional, scope of supply as shown in the photos. Redpfx Aji D Ew Noahjw

Condition: used, mileage: 17,200 km, power: 213 kW (289.60 HP), first registration: 03/2023, fuel type: diesel, overall weight: 15,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, loading space length: 7,250 mm, loading space width: 2,430 mm, loading space height: 2,320 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), tail-lift, Like-new and exceptionally well-maintained box truck, MAN TGM 15.290 BL, with a 7.25-meter cargo space, only 17,200 km, 8.0-ton payload, 3 seats, automatic transmission, air conditioning, D?Hollandia tail lift (1.5 tons), air-suspended rear axle, trailer coupling with pneumatic connections, and from its first owner! Cab: CC short 3 seats Engine: Euro 6 E Drive: 4 x 2 Wheelbase: 5,125 mm Rjdpfx Aaszd Iuzjhjw Payload: 8,035 kg with a gross vehicle weight of 15,000 kg Payload: 8,535 kg with a gross vehicle weight of 15,500 kg, technically possible Box interior dimensions: approx. length 7.25 m x approx. width 2.43 m x approx. height 2.32 m Tail lift: D?Hollandia, type DHLM.15, load capacity 1,500 kg Automatic transmission: MAN TipMatic 12.12 OD Transmission function: MAN Idle Speed Driving Differential lock in the rear axle Front axle: leaf spring suspension, rear axle: air suspension Front axle: 6,300 kg, rear axle: 11,000 kg Axle ratio: i = 3.70 Stabilizer for front and rear axle Trailer coupling: ROCKINGER 400 G150A with pneumatic connections Total weight (tractor and trailer): 36,000 kg Trailer load (center axle trailer): 16,000 kg Trailer load (fifth wheel trailer): 21,657 kg Air conditioning Electronic braking system (EBS) ABS, ASR, and ESP Full brake assist Emergency brake assist (EBA) Lane departure warning system (LDW) MAN EasyStart Multi-function steering wheel Cruise control Engine brake MAN radio with 7-inch display Electrically adjustable and heated exterior mirrors Electric windows Driver's seat: air-suspended comfort seat Very good and well-maintained condition German vehicle, from its first owner! Price: NET, plus 19% VAT. We would be happy to provide you with attractive financing options. All information without guarantee. Errors and prior sale excepted. Internal vehicle number: 2547

Condition: used, mileage: 190,786 km, power: 213 kW (289.60 HP), first registration: 08/2015, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), MAN 18 ton, 2-axle box truck with 290 hp, automatic transmission, fitted with a large box body (8.35 m long and 2.44 m high), tail lift with 3,000 kg capacity, 9 t payload, ADR equipment, air suspension on rear axle, air conditioning, in excellent condition. Cab: TGM C short Engine: Euro 6 SCR Drive: 4 x 2 Wheelbase: 6,575 mm Payload: 8,945 kg (at 18,000 kg GVW) Gross vehicle weight: 19,000 kg technically possible Box internal dimensions: approx. 8.35 m (L) x 2.42 m (W) x 2.44 m (H) Right-hand front side door Double lashing rails inside Rear swing doors Tail lift: Dhollandia model DHLM.30, capacity 3,000 kg Remote control with cable Transmission: MAN TipMatic 12 12 OD MAN EasyStart with TipMatic Differential lock on rear axle Front axle: leaf suspension; rear axle: air suspension Front axle: VOK-07 offset; Rear axle: Hypoid HY-1350 Front springs: parabolic, 7.5 t; Rear springs: air, 13.0 t Axle ratio: HY i = 4.11 Stabilizer for front and rear axle Automatic climate control MAN BrakeMatic ABS, ASR and ESP Cruise control Engine brake Rocker lever brake (EVB) Sun visor Work lights Electrically adjustable and heated exterior mirrors Electric windows Air-suspended comfort driver’s seat Hands-free functionality for 1 mobile phone (MFL and Bluetooth-enabled) Radio: MAN Media Truck Advanced 12 V with navigation preparation ADR hazardous goods equipment, type AT Very good and well-maintained condition Net price plus 19% VAT. We will be happy to provide attractive financing offers. All details without guarantee. Subject to errors and prior sale. Internal vehicle number: 2292 Rodpfx Aajzdxfdohsw

Condition: used, mileage: 190,786 km, power: 213 kW (289.60 HP), first registration: 08/2015, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), MAN 18 ton, 2-axle box truck with 290 hp, automatic transmission, fitted with a large box body (8.35 m long and 2.44 m high), tail lift with 3,000 kg capacity, 9 t payload, ADR equipment, air suspension on rear axle, air conditioning, in excellent condition. Cab: TGM C short Engine: Euro 6 SCR Drive: 4 x 2 Wheelbase: 6,575 mm Payload: 8,945 kg (at 18,000 kg GVW) Gross vehicle weight: 19,000 kg technically possible Box internal dimensions: approx. 8.35 m (L) x 2.42 m (W) x 2.44 m (H) Right-hand front side door Double lashing rails inside Rear swing doors Tail lift: Dhollandia model DHLM.30, capacity 3,000 kg Remote control with cable Transmission: MAN TipMatic 12 12 OD MAN EasyStart with TipMatic Differential lock on rear axle Front axle: leaf suspension; rear axle: air suspension Front axle: VOK-07 offset; Rear axle: Hypoid HY-1350 Front springs: parabolic, 7.5 t; Rear springs: air, 13.0 t Axle ratio: HY i = 4.11 Stabilizer for front and rear axle Automatic climate control MAN BrakeMatic ABS, ASR and ESP Cruise control Engine brake Rocker lever brake (EVB) Rsdpfx Ajzdxd Hjahsw Sun visor Work lights Electrically adjustable and heated exterior mirrors Electric windows Air-suspended comfort driver’s seat Hands-free functionality for 1 mobile phone (MFL and Bluetooth-enabled) Radio: MAN Media Truck Advanced 12 V with navigation preparation ADR hazardous goods equipment, type AT Very good and well-maintained condition Net price plus 19% VAT. We will be happy to provide attractive financing offers. All details without guarantee. Subject to errors and prior sale. Internal vehicle number: 2292

Condition: used, Year of construction: 2023, Mileage: 44 km Drive: Wheel Empty weight: 1.030 kg Dimensions of cargo space: 300 x 150 x 195 cm General condition: very good Technical condition: very good Visual appearance: very good Production country: NL Please contact Vink Machinery for more information Frisian Motors Leffert FM-90 * 2023 * Lithium battery drive * 44 km/h (27 miles) Rjdpfx Asx I Ra Deahsw * Dutch license plate * 4WD and 2WD * Glass windshield with wiper * Doors * Flashing beacon * All-trail tires * Winch with remote control * Heating * Built-in charger * 230-volt connection * Radio with Bluetooth * 1030 kg net weight

Condition: used, axle configuration: > 3 axles, permissible axle load (axle 1): 12,000 kg, permissible axle load (axle 2): 12,000 kg, permissible axle load (axle 3): 12,000 kg, first registration: 09/2004, total length: 16,800 mm, total width: 2,530 mm, total height: 1,750 mm, suspension: hydraulics, tire size: 295 / 80 / R22.5, color: red, Year of construction: 2004, General information Model code: ### Axle configuration Tyre size: 295 / 80 / R22.5 Make axles: BPW ECoPlus Brakes: drum brakes Rsdpfx Aaszdd Rtohow Suspension: hydraulic suspension Rear axle 1: Double wheels; Lift axle; Max. axle load: 12000 kg; Tyre profile left inner: 50%; Tyre profile left outer: 50%; Tyre profile right outer: 50%; Tyre profile right outer: 50% Rear axle 2: Double wheels; Max. axle load: 12000 kg; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30% Rear axle 3: Double wheels; Max. axle load: 12000 kg; Steering; Tyre profile left inner: 70%; Tyre profile left outer: 70%; Tyre profile right outer: 70%; Tyre profile right outer: 70% Rear axle 4: Double wheels; Max. axle load: 12000 kg; Steering; Tyre profile left inner: 50%; Tyre profile left outer: 50%; Tyre profile right outer: 50%; Tyre profile right outer: 50% Rear axle 5: Double wheels; Max. axle load: 12000 kg; Steering; Tyre profile left inner: 50%; Tyre profile left outer: 50%; Tyre profile right outer: 50%; Tyre profile right outer: 50% Weights Empty weight: 21.680 kg Condition General condition: average Technical condition: average Visual appearance: average Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: as good as new (ex-display), Year of construction: 2024, New hydraulic heating plate press Manufacturer: ITALPRESSE, Type XL/6 30-13 with gold-anodized plates Touch display control - Electric heating plates, 3,000 x 1,300 mm - Total pressure: 90 tons - Number of heating plates: 2 pcs. - Number of tiers: 1 pc. - Cylinder stroke: 350 mm - Tier opening: 350 mm - All-side loading - Number of pressure cylinders: 6 pcs. - Diameter of pressure cylinders: 85 mm - Power requirement of hydraulic unit: 3 kW - Electric heating plates made of solid, hard aluminum with built-in heating wires - Heating power: 22 kW - High-pressure insulation plates - Working temperature: 90° C - Max. temperature: 120° C - Operating voltage: 400 V/50 Hz - Safety regulations according to CE standard Standard equipment: - Movement of the press table with rack and pinion and parallel guides at 2 corners of the press table, made of self-lubricating material - Electronic control unit with touch screen for controlling and monitoring the machine - Digital timer for setting the pressing time and automatic opening - Digital input and monitoring of the pressing pressure - Digital timer for setting the pressing time - Digital diagnostics and display of error messages - Safety circuit with two-hand operation - Safety pull cord - Safety bracket for the lower press table Integrated accessories: - Touch screen TS/400 - EFC Electronic flatness control Rsdjdx R Tfjpfx Aahew - Gold-anodized heating plates (bus bars) Location: In stock at 54634 Bitburg - Immediately available -

Condition: used, mileage: 111,811 km, power: 213 kW (289.60 HP), first registration: 07/2023, fuel type: diesel, overall weight: 15,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, loading space length: 7,250 mm, loading space width: 2,480 mm, loading space height: 2,600 mm, Equipment: ABS, electronic stability program (ESP), navigation system, parking heater, tail-lift, Well-maintained MAN 15-ton flatbed truck with tarpaulin cover, first owner, with only 111,000 km and 290 hp, featuring a 7.25 m long flatbed and Edscha cover, as well as double-sided sliding tarpaulin, internal height 2.60 m, Bär Cargolift tail lift type BC 1500 S4 - B4, 7.75 tons payload capacity, automatic transmission, automatic climate control, auxiliary heater, air-sprung rear axle, trailer coupling, navigation system, cruise control, and more. Model: TGM TG3 Cab: CC short Wheelbase: 5,125 mm Payload: 7,755 kg with 15,000 kg permissible gross vehicle weight Payload: 8,255 kg with 15,500 kg technically permissible gross vehicle weight Engine: Euro 6 E with 290 hp and 1,150 Nm Drive: 4 x 2 Flatbed-tarpaulin internal dimensions: approx. length 7.25 m x width 2.48 m x height 2.60 m Flatbed with split aluminum side panels, 50 cm high Edscha cover Sliding tarpaulin on right and left sides Tail lift: Bär Cargolift type BC 1500 S4 - B4, lifting capacity 1,500 kg according to manufacturer Tail lift platform dimensions: approx. 2.50 m long x 1.80 m wide, with roll stop Automatic transmission: MAN TipMatic 12.12 OD Transmission function: MAN Idle Speed Driving Front axle: 6,300 kg, HY rear axle: 11,000 kg Front axle load: 6.0 tons, rear axle load: 11.0 tons HY axle ratio: i = 3.70 Differential lock on rear axle Front axle: leaf spring suspension, rear axle: air suspension Stabilizer bar for front and rear axles Shock absorbers on front and rear axles Automatic climate control Auxiliary heater EBS High-performance engine brake MAN EVBec Disc brakes on front and rear axles ABS, ASR and ESP MAN EasyStart Emergency Brake Assist (EBA) Lane Departure Warning (LDW) Full Brake Assist Trailer coupling: ROCKINGER 400G 150A with air pressure connections Permissible total towing weight: 33,000 kg Trailer load with continuous braking system: 19,853 kg Trailer load with continuous braking system: 21,500 kg technically possible Trailer load with semi-trailer drawbar/center axle trailer: 16,000 kg Cruise control LED: Front headlights, daytime running lights, rear lights, fog lights, outline lights, and side marker lights Multi-function steering wheel 220-liter tank Large plastic storage box at the rear right 2 boxes for fire extinguishers at the rear left Redpfszc A Tqox Aahjw Roof hatch External sun visor Sunshade for door window Work lights Electrically adjustable and heated exterior mirrors Electric windows Driver comfort seat with air suspension, lumbar support, shoulder adjustment, and heating MAN Media System Advanced Navigation 7 inch MAN sound system The truck was involved in an accident - previous damage. German vehicle, first owner. Price NET, plus 19% VAT. We will gladly provide you with attractive financing options. All information without guarantee. Errors and prior sale are subject to change. Internal vehicle number: 2608

Condition: used, mileage: 111,811 km, power: 213 kW (289.60 HP), first registration: 07/2023, fuel type: diesel, overall weight: 15,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, loading space length: 7,250 mm, loading space width: 2,480 mm, loading space height: 2,600 mm, Equipment: ABS, electronic stability program (ESP), navigation system, parking heater, tail-lift, Exceptionally well-maintained MAN 15-ton flatbed truck with canvas cover, from its first owner, with only 111,000 km and 290 hp, featuring a 7.25 m long flatbed with an Edscha cover, and sliding canvas on both sides, interior height 2.60 m, Bär Cargolift type BC 1500 S4 - B4 loading platform, 7.75 tons payload capacity, automatic transmission, automatic climate control, auxiliary heater, air-suspended rear axle, trailer coupling, navigation system, cruise control, and more. Model TGM TG3 Cab CC short Wheelbase 5,125 mm Payload 7,755 kg at 15,000 kg permissible total weight Payload 8,255 kg at 15,500 kg technically permissible total weight Engine Euro 6 E with 290 hp and 1,150 Nm Drive 4 x 2 Flatbed-canvas interior dimensions approx. length 7.25 m x width 2.48 m x height 2.60 m Flatbed with split aluminum side panels, 50 cm high Edscha cover Sliding canvas on the right and left sides Bär Cargolift type BC 1500 S4 - B4 loading platform, lifting capacity 1,500 kg according to the manufacturer Loading platform dimensions approx. 2.50 m long x 1.80 m wide, with roll stop Automatic transmission MAN TipMatic 12.12 OD Transmission function MAN Idle Speed Driving Front axle steered 6,300 kg, HY rear axle 11,000 kg Front axle load 6.0 tons, rear axle load 11.0 tons HY axle ratio i = 3.70 Differential lock on the rear axle Front axle leaf-sprung and rear axle air-sprung Stabilizer bar for front and rear axles Shock absorbers on front and rear axles Automatic climate control Auxiliary heater EBS High-performance engine brake MAN EVBec Disc brakes on front and rear axles ABS, ASR and ESP MAN EasyStart Emergency Brake Assist (EBA) Lane Departure Warning (LDW) Full brake assist Trailer coupling, ball type ROCKINGER 400G 150A with air pressure connections Permissible total weight 33,000 kg Trailer load with continuous braking system 19,853 kg Trailer load with continuous braking system 21,500 kg technically possible Trailer load with SDAH/ZANH 16,000 kg Cruise control LED: Headlights, daytime running lights, taillights, fog lights, outline lights, and side marker lights. Multi-function steering wheel 220-liter tank Large plastic toolbox on the rear right 2 boxes for fire extinguishers on the rear left Roof hatch External sun visor Sun blind, door window Work lights Electrically adjustable and heated exterior mirrors Redpfjzc A Tkox Aahjw Electric windows Driver comfort seat, air-sprung, with lumbar support, shoulder adjustment and heating MAN Media System Advanced Navigation 7 inches MAN sound system The truck had an accident - previous damage German vehicle, from first owner Price NET, plus 19% VAT. We will gladly provide you with attractive financing options. All information without guarantee. Errors and prior sale reserved. Internal vehicle number: 2608

Condition: used, mileage: 147,000 km, power: 66 kW (89.73 HP), fuel type: diesel, gearing type: mechanical, first registration: 03/2006, loading space length: 330 mm, color: white, number of seats: 3, Year of construction: 2006, Equipment: had accident, power assisted steering, The vehicle is in good condition but is not operational as the injection pump needs to be replaced. Rodpfxey A T Rbe Aahew The vehicle is sold as seen, in its current state. Equipped with a rigid box body (removal van) and roof rack. VAT at 22% is excluded. Transfer of ownership costs excluded. Payload: 900 kg Body length: 3.3 m For information, contact via WhatsApp.

Condition: used, mileage: 70,109 km, power: 213 kW (289.60 HP), first registration: 03/2023, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: blue, gearing type: automatic, loading space length: 4,400 mm, loading space width: 2,430 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), Well-maintained 18-ton MAN TGM 18.290 BL 4x2 truck with a Meiller 3-way tipper, automatic transmission, payload of 10.7 tons, air-suspended rear axle, high-performance engine brake, EVBec, trailer coupling with air and hydraulic connections for tipper trailers, air-suspended rear axle, air conditioning, reversing camera, German vehicle from first owner, and more. Short CC cab with rear window Rjdpfx Asy Trypsahew Euro 6 E diesel engine with 290 hp and 1,150 Nm of torque Unladen weight 7,342 kg Payload 10,658 kg Drive 4 x 2 Wheelbase 3,575 mm Meiller 3-way tipper, approx. 4,400 x 2,430 mm, side walls 600 mm high Front wall 800 mm high 6 recessed tie-down points in the floor Rear with swing-out tailgate MAN TipMatic 12.12 OD automatic transmission MAN TipMatic steering column lever control MAN Idle Speed Driving transmission function Trailer coupling, Ringfeder type RF40/G 150A with compressed air connections Permissible total weight 36,000 kg Trailer load with continuous braking system 21,657 kg Trailer load with SDAH/ZANH 16,000 kg Tipper hydraulic connections at the rear for 3-way tipper trailers Front axle with leaf springs and rear axle with air suspension Differential lock in rear axle Front axle 7,500 kg, rear axle 13,000 kg, HY axle Front axle load 7,100 kg, rear axle load 11,500 kg Stabilizers and shock absorbers on front and rear axles HY axle ratio i=4.63 Full brake assist Hill start assist MAN Easy Start Emergency brake assist EBA Lane departure warning LDW Reversing camera EBS with ABS and ASR ESP High-performance engine brake MAN EVBec, adjustable Disc brakes on front and rear axles Air conditioning Cruise control Dustbin in the cab Sun visor Folding rear underrun protection 2 LED rotating beacons on the cab roof Multi-function steering wheel LED daytime running lights and tail lights Roof hatch Large metal dustbin on the left for tools and accessories Electrically adjustable and heated exterior mirrors Electric windows Driver comfort seat with air suspension MAN EasyControl control panel, 4 functions Smartphone integration MAN Media System Advanced 7 inch MAN Sound System Very good and well-maintained condition German vehicle from first owner Price NET, plus 19% VAT. We will gladly provide you with attractive financing offers. All information without guarantee. Errors and prior sale are reserved. Internal vehicle number: 2609

Condition: used, mileage: 70,109 km, power: 213 kW (289.60 HP), first registration: 03/2023, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: blue, gearing type: automatic, loading space length: 4,400 mm, loading space width: 2,430 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), Exceptionally well-maintained 18-ton MAN TGM 18.290 BL 4x2 truck with a Meiller 3-way tipper, automatic transmission, payload of 10.7 tons, air-suspended rear axle, high-performance engine brake, EVB?ec, trailer hitch with air and hydraulic connections for tipping trailers, air-suspended rear axle, air conditioning, reversing camera, German vehicle from first owner, and more. Rodpfsy Tryvjx Aahsw Short CC cab with rear window Euro 6 E diesel engine with 290 hp and 1,150 Nm of torque Unladen weight 7,342 kg Payload 10,658 kg Drive 4 x 2 Wheelbase 3,575 mm Meiller 3-way tipper, approx. 4,400 x 2,430 mm, sideboards 600 mm high Front wall 800 mm high 6 recessed lashing eyes in the floor Rear with swing-out tailgate MAN TipMatic 12.12 OD automatic transmission MAN TipMatic steering column lever operation MAN Idle Speed Driving transmission function Trailer hitch, Ringfeder type RF40/G 150A with compressed air connections Permissible total weight 36,000 kg Trailer load with continuous braking system 21,657 kg Trailer load with SDAH/ZANH 16,000 kg Rear tipping hydraulic connections for 3-way tipping trailers Front axle leaf-sprung, rear axle air-suspended Differential lock in rear axle Front axle 7,500 kg, rear axle 13,000 kg, HY axle Front axle load 7,100 kg, rear axle load 11,500 kg Stabilizers and shock absorbers on front and rear axles HY axle ratio i=4.63 Full brake assist MAN Easy Start hill start assist Emergency brake assist EBA Lane departure warning LDW Reversing camera EBS with ABS and ASR ESP High-performance engine brake MAN EVBec, adjustable Disc brakes on front and rear axles Air conditioning Cruise control Dust box in the cab Sun visor Foldable rear underrun protection 2 LED rotating beacons on the cab roof Multifunction steering wheel LED daytime running lights and taillights Roof hatch Large metal dust box on the left for tools and accessories Electrically adjustable and heated exterior mirrors Electr. windows Driver's comfort seat with air suspension MAN EasyControl control panel, 4 functions Smartphone integration MAN Media System Advanced 7 inch MAN Sound System Very good and well-maintained condition German vehicle from first owner Price NET plus 19% VAT. We will gladly send you attractive financing offers. All information without guarantee. Errors and prior sale reserved. Internal vehicle number: 2609

Condition: good (used), Year of construction: 2009, Clamping force: 90 t Screw diameter: 30 mm Screw diameter 2: 25 mm Rodpfxsy Duaae Aahew Type: Multicomponent Drive: Hydraulic

Condition: used, Year of construction: 2020, operating hours: 4,200 h, clamping force: 90 kN, displacement volume: 113 cm³, injection pressure: 2,400 bar, overall weight: 7,500 kg, screw conveyor diameter: 30 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Rsdpfx Aev S H N Rjahow

Condition: new, Year of construction: 2025, TRSI Monoblock Integrated Pusher – The Top of the Range in Europe If you are looking for an innovative, fast, and reliable automatic optimizing crosscut saw, the TRSI is the ideal choice. Fully customizable to meet your specific needs, it is designed for fixed-length or optimized cutting, making it suitable for a wide range of industrial applications. Ideal for Various Industries Packaging – Precise cutting of single boards or bundles, also perfect for trimming plugs. Windows and Doors – Advanced optimization to select quality and defects, minimizing waste. Furniture – Millimetric precision for cutting finished semi-finished products with maximum quality. Flooring and Parquet – High-precision cutting for wooden flooring applications. Cutting-Edge Technology The TRSI is equipped with an advanced programming software that simplifies operations and optimizes production processes: Fixed-Length Cutting: Predefined sequences for repetitive and precise machining. Optimized Cutting: OL Version: Length-based optimization to minimize waste. E Version: Full optimization with defect elimination to maximize yield. Customizable Optimization Priorities: Choose between commercial value, waste reduction, quantity, length, or a mixed strategy. Immediate Integration with company management systems without additional interfaces. Online Remote Assistance for continuous technical support. Intuitive HD Touchscreen with USB data import capability. Industrial CNC Computer ensuring uninterrupted production. Ultra-Precise and Fast Movement High-speed pusher system on steel linear guides with ball recirculation and double carriage, ensuring smooth and precise movements. High-performance brushless motors for superior speed and reliability. Reinforced structure for flawless movement, eliminating vibrations and slippage. Protected stroke with visible pneumatic lifting, allowing maximum control in every cutting phase. Powerful and Reliable Cutting Unit Robust aligner with integrated silent blower for a more comfortable working environment. Pneumatic pressure system on linear guides with ball recirculation for perfect holding. Multiple rubberized wheels with oil-bath clutch, ensuring maximum grip and preventing slippage. Accessories to Maximize Productivity Custom loaders to eliminate downtime and boost efficiency. Manual and automatic printers for clear and precise marking of semi-finished products. Optimized unloading systems tailored to specific processing needs. Redpfsv Iqcmjx Aahsw Trust Cursal for Uncompromising Production Efficiency With the TRSI, your company can achieve unprecedented levels of efficiency and precision. Discover our accessories, loaders, and unloaders to customize your system and optimize every stage of the cutting process. Contact us today for a customized consultation and take your production to the next level.

Condition: new, Year of construction: 2025, TRSI Automatic Saw: Power, Precision, and Optimization TRSI Ø600 Push-Feed Saw – 90° Cut: Perfect for Beech Sawing The TRSI Ø600 is an automatic optimizer push-feed saw, designed for cutting beech planks with constant thickness and variable width. Its modular monoblock structure and Ø600 blade make it ideal for high-precision operations. Key Features: Programmed and Optimized Cutting: Precise and repetitive operations, or optimization to reduce waste and maximize material yield. TRSI Ø700 Push-Feed Saw – 90° Cut: Beam and Packaging Cutting The TRSI Ø700 is designed for high-performance cutting of beams and packaging. With a Ø700 blade and a robust structure, it provides high productivity in both sawmills and packaging industries. Key Features: Programmed and Optimized Cutting: Maximizing material usage while minimizing waste. TRSI: The Customizable Solution for Every Sector The TRSI is the ideal automatic saw for companies seeking speed, reliability, and precision. Customizable to your needs, it fits perfectly into various production sectors. Advanced Technology: Advanced Software: Easy programming and process optimization. Full Integration: Compatible with your business systems. Remote Assistance: Technical support always available. Superior Performance: Ultra-Precise Movement: Rapid push-feed on ball screw guide for smooth and accurate cuts. Brushless Motors: High performance and reliability. Reinforced Structure: Guarantees smooth operation without vibrations. Accessories for Maximum Productivity: Customized Loaders: Reducing downtime. Manual and Automatic Printers: Clear marking of semi-finished products. Optimized Discharge Systems: For all types of processing. Trust Cursal for Innovation and Performance Rodpev Iqddefx Aahsw With the TRSI, you can achieve maximum efficiency and precision, customizing every aspect of the machine to optimize production flow. Contact us for a tailored consultation and take your production to new levels of quality.

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 1,000 kg, fuel type: diesel, power: 72 kW (97.89 HP), continuous power (apparent): 90 kVA, total length: 2,270 mm, total width: 980 mm, total height: 1,200 mm, New emergency power generator Output: 90 kVA Weight: 1,000 kg Overall dimensions: 2.27m x 0.98m x 1.20m Generator output: 90 kVA Voltage: 400 V Diesel engine Electric starter 2x 230V outlets 1x 360V outlet CE and ISO certified Forklift pockets for transport Soundproofed European/worldwide shipping Rsdey Dtzpspfx Aahjw

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SCC, warranty duration: 12 months, volume flow: 45 m³/h, screw conveyor length: 6,000 mm, type of input current: three-phase, screw diameter: 323 mm, input voltage: 400 V, rotational speed (max.): 240 rpm, rotational speed (min.): 140 rpm, Custom-manufactured to order. Send us your diameter, length, and installation angle — receive a full technical quote within 24 hours. INOTEK SCREW manufactures heavy-duty SCC-type cement screw conveyors for bulk material handling in cement plants, dry mortar facilities, fly ash transfer, lime and gypsum processing lines. Based in Ankara, Turkey, we have supplied equipment to over 40 countries with full export documentation and ISO 9001:2015 certified production. KEY SPECIFICATIONS: - Diameter: Ø114 / Ø168 / Ø219 / Ø273 / Ø323mm – any size made to order - Drive speed: 140 / 200 / 240 RPM - Motor power: 1.5 kW to 22 kW (IE2 efficiency class) — Siemens motors standard - Material: Carbon steel S235/S355 standard | AISI 304/316 stainless steel on request - Screw flights: cold-rolled, 3–10mm thickness - Orientation: horizontal, inclined (up to 45°), or vertical - Custom inlet/outlet: conical, square, or rectangular - Surface treatment: primer + epoxy topcoat standard | hot-dip galvanizing on request CAPACITY BY DIAMETER (approximate, horizontal, cement powder): Rodpfeyq H Iuox Aahsw - Ø114 mm → 4–8 m³/h - Ø168 mm → 10–18 m³/h - Ø219 mm → 20–30 m³/h - Ø273 mm → 30–40 m³/h - Ø323 mm → 40–55 m³/h All values depend on RPM, inclination angle, and material bulk density. Custom diameters and capacities available on request. APPLICATIONS: Cement | Fly ash | Limestone powder | Dry mortar | Gypsum | Clay | Silo filling & emptying | Batching plants | Asphalt facilities WHY INOTEK: ✔ CE marked — compliant with EU Machinery Directive 2006/42/EC ✔ ISO 9001:2015 certified factory ✔ 12 months warranty — replacement parts shipped internationally ✔ Exported to 40+ countries – full documentation (packing list, EUR.1, certificate of origin, test reports) ✔ Trusted by: Coca-Cola | Unilever | Anadolu Efes | Limak Holding | OYAK | Cengiz İnşaat ✔ 20–35% more competitive than equivalent European pricing ✔ Production lead time: 3–5 weeks from drawing approval PRICING REFERENCE: Entry-level unit Ø114mm — from €1,500 EXW Ankara. All diameters, lengths, and configurations quoted within 24 hours. REQUEST A FREE QUOTE WITHIN 24 HOURS: Send us your required diameter, length, material type, and installation angle – we return a full technical offer and delivery schedule. Distributor and OEM partnerships welcome. Contact us to discuss exclusive regional agreements.

Condition: good (used), Year of construction: 2009, operating hours: 70,171 h, functionality: fully functional, clamping force: 900 kN, screw diameter: 22 mm, displacement volume: 38 cm³, ENGEL VICTORY 80-90 tech Stock No.: 503415 Manufacturer: ENGEL Type: VICTORY 80-90 tech Control: CC200 Year of manufacture: 2009 Operating hours: 70,171 h Technical Data – Clamping Unit Clamping force: 900 kN Platen size (HxV): 740 x 680 mm Minimum mould height: 300 mm Max platen daylight: 800 mm Opening stroke: 500 mm Ejector stroke: 130 mm Rsdpsytfccsfx Aahsw Ejector force: 40 kN Movable platen centering diameter: 125 mm Fixed platen centering diameter: 125 mm Technical Data – Injection Unit Screw diameter: 22 mm Shot volume: 38 ccm Injection pressure: 2,060 bar Screw L/D ratio: 19 l/d Screw stroke: 100 mm Screw speed: 360 min⁻¹ Free flow rate: 78 g/s PS Number of heating zones: 4 Nozzle stroke: 230 mm Dimensions & Weight Machine dimensions (LxWxH): 4.4 m x 1.5 m x 2 m Total weight: 6,700 kg Equipment Display language: German CEE socket 16A 1x hydraulic core pull 2x air valves Machine with water battery Machine without material hopper Levelling elements Schuko socket 10A 4x mould heating circuits