Used Ruwi Milling Machine for sale (64,913)

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 06651, travel distance X-axis: 6,800 mm, travel distance Y-axis: 3,700 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 10 m/min, total length: 15,000 mm, total width: 7,500 mm, spindle speed (max.): 4,000 rpm, total height: 7,000 mm, table height: 1,100 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, distance between stands: 3,300 mm, type of input current: three-phase, table load: 50,000 kg, rotational speed (max.): 4,000 rpm, distance table center to spindle nose: 2,110 mm, overall weight: 110,000 kg, spindle motor power: 50,000 W, control cabinet length: 7,000 mm, control cabinet height: 2,000 mm, control cabinet width: 600 mm, Equipment: rotational speed infinitely variable, MODEL: Portal Type AGE: 1992 S/N #: 06651 CATEGORY: Mills, Planer Type, CNC CAPACITY: X-Axis Travel: 6800 mm Y-Axis Head Travel: 3700 mm Bjdpfxeyahv Se Ak Eelg Z-Axis Ram Stroke: 1500 mm, fixed crossrail Ram Cross Section: 500 mm x 500 mm Distance Between Columns: 3300 mm Distance Table To Ram Face: 2110 mm, vertical passage 2000 mm Table Size: 6000 x 2500 mm Spindle (Quill) Diameter: 250 mm Spindle Taper: ISO #50 Spindle Speeds: 0-4000 RPM Spindle Motor: 50 KW EQUIPPED WITH: FIDIA System C20 CNC Control, new in 2002 CNC biaxial continous milling head Universal Milling Head with Auto Indexing Right Angle Head with Auto Indexing Straight Milling Head Wagons for Head Change and Tool Pick-up Change Hydrostatic Bearings Coolant System Full Length Chip Conveyors both side Way Covers Rapid movements: Z-10.000 mm/min, X and Y-15.000 mm/min Table load: max 50.000 kg Weight of the machine: 110.000 kg Outside dimensions: 15.000 x 7.500 x 7050 mm Machine has been tested before dismantling and is fully operational, all mechanical components in excellent condition, electrics new in 2018. Machine available from stock. The price is now SPECIAL FROM STOCK. Once we will reassemble the machine, price will grow significantly. We can assist you to assemble and run up the machine.

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Bsdpfx Ajxxb Rrsk Eslg Knee Travel: Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 Bledpfsx D Tbmex Ak Ejg £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 5752, travel distance X-axis: 1,250 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 520 mm, spindle speed (max.): 2,000 rpm, table length: 1,800 mm, TECHNICAL DETAILS Blsdpfoy Avvaex Ak Eeg Travel X-axis: 1,250 mm Travel Y-axis: 540 mm Travel Z-axis: 520 mm Main spindle power: 7.5 kW Spindle speed: 275 - 2,000 rpm Table length: 1,800 mm Table width: 400 mm MACHINE DETAILS Control manufacturer: Heidenhain Number of axes: 3 Tool holder: BT50 Power: 12.0 kW Dimensions & Weight Dimensions (L x W x H): 2100 x 2100 x 2200 mm Weight: 3,600 kg EQUIPMENT Tools

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 5,300 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 2,000 mm, spindle speed (max.): 1,800 rpm, table length: 7,000 mm, TECHNICAL DETAILS Travel range X-axis: 5,300 mm Travel range Y-axis: 1,500 mm Travel range Z-axis: 2,000 mm Table size: 7,000 x 1,000 mm Tool holder: SK 50 Spindle speeds: 12.5 – 1,800 rpm Spindle motor: 22 kW Feed rate range: 6 – 10,000 mm/min Blodpfoy Dg I Njx Ak Eeg Rapid traverse: 15 m/min Number of tool changer positions: 24 MACHINE DETAILS Total power requirement: 70 kW Dimensions & Weight Space requirements: approx. 8.7 x 4.7 x 4.1 m Machine weight: approx. 30 t EQUIPMENT Electronic handwheel Automatic swivelling milling head, vertical/horizontal 2 x 180° Milling head swivels automatically in the rear axis 72 x 5° Automatic tool changer (ATC 24) Coolant system Extended cross travel (Y-axis) 1,500 mm Extended vertical travel (Z-axis) 2,000 mm

Condition: used, Year of construction: 2003, x-travel 2.500 mm y-travel 800 mm z-travel 1.250 mm Control Heidenhain iTNC 426 spindle tunring speed 4.000 U/min tool taper ISO 50 table surface area 2.200 x 750 mm max. table load 4.000 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - Automatic universal milling head, 0 and 180 degrees Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Blsdpfx Akey I Dg Re Eeg Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: new, Year of construction: 2026, 420 mm 220 mm 380 mm Bedpfey I Db Ijx Ak Eolg 840x390 mm 950x250 mm 65-2600 U/min DIN 2080 ISO 40

Condition: new, Year of construction: 2026, 420 mm 220 mm Bsdpfjy I Dbzjx Ak Eelg 380 mm 840x390 mm 950x250 mm 65-2600 U/min DIN 2080 ISO 40

Condition: new, Year of construction: 2026, 420 mm 220 mm 380 mm 840x390 mm 950x250 mm 65-2600 U/min Bjdpjy I Dbusfx Ak Eslg DIN 2080 ISO 40

Condition: excellent (used), With DRO Working travels 300 x 200 x 350 mm Table size 600 x 200 mm Bedpfoy Iz Rmex Ak Eolg Spindle taper for collets ISO 30 Spindle speeds 80-2'200 rpm Misc.accessories MARCELS MASCHINEN CH

Condition: good (used), Year of construction: 1990, HEIDENHAIN TNC-355 Bodpefg Ep Defx Ak Eelg Working travels 850x500x450mm Table size 1250x500mm Spindle taper 50 Spindle speeds 35,5-1800 rpm Misc.accessories MARCELS MASCHINEN CH

Condition: used, total height: 1,700 mm, total width: 1,600 mm, total length: 1,800 mm, Colour: Grey Empty weight: 1.650 kg Bledpfx Akoymfn Ej Esg - Documentation available: Yes - CE certificate present: No - Drive system: Conventional - Horizontal/vertical: Horizontal - Power [kW]: 4.0 - Number of axes [pcs]: 3 - X-axis travel [mm]: 700 - Y-axis travel [mm]: 550 - Z-axis travel [mm]: 430 - Table length [mm]: 1100 - Table width [mm]: 255 - Tool holder: ISO40 - Min. spindle speed [rpm]: 38 - Max. spindle speed [rpm]: 1500 - Options: Digital readout - └ Type of digital readout: Sony - Transport dimensions: 1800mm x 1600mm x 1700mm (l x w x h) - Transport weight [kg]: 1650kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2021, condition: new, functionality: fully functional, A used one is for sale Felder Milling machine F-900 Z with tenoning and slotting table length 1300mm The machine is inot used at all and therefore in mint (new) condition. Technical data: - 5 milling speeds - Milling spindle swivels 90° - 45° - Milling stop for tools up to Ø 230mm Bedpey Iyvnefx Ak Eelg - Multi-adjustment system - Tapping and slotting table 1300mm - electrically height-adjustable + swiveling "PowerDrive" - Engine power 7,3kW SD start

Condition: good (used), Code: 0375 Brand: GREDA Model: CFL 4 - CE Standard Contouring, milling, and sanding machine for contouring and milling on two opposing sides of a piece of wood, such as chair, armchair, sofa, gun handles, and various - CE Standard Technical data: Blsdpfx Akjy Iwvro Ejg N° 2 milling units N° 2 milling and sanding units N° 4 motors 7,5 Hp each N° 4 rotation reversals Max workable length 2500 mm Max workable height 180 mm Min/max workable width 20/320 mm Milling unit shaft diameter 35 mm Max milling tools dimensions diameter 160 mm - height 180 mm Carriage feed 30 mt/min Carriage return 30 mt/min Automatic table slowdown with stops Sanding belt length 2500 mm Automatic positioner N° 6 adjustable pressers Total installed power 36 Hp Compressed air 6 bar Overall dimensions mm 6700 x 2200 x 1800 h Weight kg 3600

Condition: new, Year of construction: 2026, functionality: fully functional, power: 7.5 kW (10.20 HP), height adjustment type: electric, Tiltable spindle moulder HOFMANN TFS 107 Basic equipment: 7.5 kW motor, 400 V, 50 Hz, table size 1,200 x 815 mm, heavily ribbed cast iron table, with table rings Electronic starting and braking device Electric height and swivel adjustment in rapid and creep speed accurate to 1/10, height adjustment approx. 145 mm, swivel adjustment +/- 45.5° 4 speeds 3,000/4,500/6,000/9,000 Milling fence type 2601 Efficient with multiplex fence jaws Fixed milling spindle Ø 30 mm with "fix" quick-release nut left/right rotation, machine socket, arc milling guard type TAPOA, Hofmann "Centrex". Paint finish: gray-white/signal blue Electrical connection value: Motor power 7.5 kW - Minimum fuse (A) slow blow 30 Additional equipment installed in this machine: - Table size 2000 x 815 mm with extendable support by 480 mm, instead of standard table - Infinitely variable speed control TFS 107 from 1,500 to 10,000 rpm incl. 7.5 kW motor, instead of standard motor with soft start - HOFMANN milling fence type 2620 instead of standard fence 2601 Efficient Total adjustment via handwheel according to display incl. option to switch to tool zero dimension. Digital display for individual jaw adjustment. Including quick clamping system for the fence jaws - 2 cast iron fence jaws 500/500 mm - Guide rails and fillet board, consisting of 5 rulers, 1 fillet board, 10 sliding blocks Blsdpfx Aksu Nz Ndj Ejg - Control panel upwards - Tool compartment for TFS 107 (only possible with top console) - Operating instructions TFS 107 German

Condition: good (used), Year of construction: 1982, functionality: fully functional, Table dimensions: 1400 x 1000 mm Table rotates from 0 to 360 degrees Spindle taper: ISO40 Spindle swivels Minimum spindle speed: 90 rpm Maximum spindle speed: 2880 rpm Machine height: 3260 mm Machine length: 2650 mm Machine width: 2600 mm Machine weight: 5100 kg Accessories, equipment: - Built-in rotary table - Rapid traverse - Motorized height adjustment Bjdpfjy Iwf Hox Ak Ejlg - Machine light The machine is in very good condition.

Condition: used, Year of construction: 1994, Motor 6 / 7.5 kW with 4-roller feed, fixed speeds. Speed extensions. Height of worktable: 920 mm. Spindle tilting: -10° + 45°. Max. spindle projection above table: 175 mm. Spindle speeds: 3250/6500-5000/10000 rpm. Max. tool diameter: 250 mm. Weight: approx. 950 kg. Location: Nattheim. Bjdpow Enw Iefx Ak Eolg

Condition: good (used), For sale, Edge chamfering machine. - Assfalg ASO 750. - 1.1kw engine. - We will help you organize a profitable shipping company or courier. Blsdpfx Aksv T Ttfj Ejg

Condition: excellent (used), For sale: a robust horizontal milling machine from the renowned manufacturer VEB Heckert Auerbach (GDR), model FW 250x1000. The machine is in very good condition, complete, fully operational, and ready for immediate use. ✔ Technical specifications: • Model: FW 250x1000 • Year of manufacture: 1979 • Manufacturer: VEB Werkzeugmaschinenfabrik Auerbach, Fritz Heckert Combine • Weight: approx. 1,700 kg • Worktable: 250 × 1000 mm, T-slots • Spindle speed range: 630 – 1,800 rpm • Power supply: 3x380 V / 50 Hz • Motor power: 5.8 kW • Control voltage: 220 V • Rated current: 16 A, fuse protection: 25 A • Mechanical and automatic feeds in axes ✔ Equipment included: • Heavy-duty machine vice on the table • Work light • Coolant system • Complete control panel with setting wheels and feed controls ✔ Advantages: • Very stable, heavy-duty design (1.7 t) – ideal for precise and repeatable machining • Renowned manufacturer – Heckert (GDR), known for indestructible machines • Functional and complete – ready to work immediately • 1000 mm table – enables machining of larger components Bljdpjw Uab Nsfx Ak Eeg This is a reliable machine, not a cheap, lightweight Chinese construction – just classic engineering from an era when equipment was built to last.

Condition: excellent (used), Year of construction: 1976, x-travel 1100 mm y-travel 700 mm z-travel 500 mm Bledpjy Ivduefx Ak Ejg turning speeds 30 - 2066 U/min weight of the machine ca. 3,2 t dimensions of the machine ca. 2,3 x 2,0 x 1,8 m

Condition: good (used), Year of construction: 2004, 1 used, well-maintained heavy NC-controlled universal console milling machine with HEIDENHAIN TNC 124 point-to-point/contour control and HEIDENHAIN HR 410 electronic handwheel, plus manually adjustable axes via hand crank. Technical specifications: Table size: 1600 x 500 mm Tool holder: ISO 50 Travel ranges: - X-axis: 1250 mm - Y-axis: 500 mm - Z-axis: 500 mm Distance between vertical spindle nose and table: 75 – 525 mm Table loading capacity: max. 800 kg Bljdey Iurqepfx Ak Esg 18 spindle speeds: 56 – 2800 rpm Feed range, infinitely variable: - Longitudinal and cross movement: 10 – 4000 mm/min. - Vertical movement: 2.5 – 1000 mm/min. Rapid traverse on all 3 axes: yes Drive power: 11 kW Machine dimensions (L x W x H): approx. 2520 x 2950 x 2400 mm Transport dimensions (L x W x H): 2700 x 1900 x 2400 mm Weight: 5260 kg Accessories / Special features: • HEIDENHAIN TNC 124 point-to-point/contour control • HEIDENHAIN HR 410 electronic handwheel • BAUMÜLLER AC servo drive • Universal milling head model IUG 32 A, “HURON” system, manually swivels on 2 planes • Hydraulic tool clamping vertical + horizontal, ISO 50 • Swivel-away device for vertical milling head • Vibration-free operation thanks to robust, heavily ribbed cast iron guides • Ball screw spindles for X, Y, and Z axes, climb milling possible in X and Y directions • All electrical controls on one side, on movable control panel • Clamping table with foldable chip guard, electrically interlocked • Hydraulic unit integrated in the machine stand • Central lubrication • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 2005, gebraucht 2005 4541 prompt, Zwischenverkauf v China 5700 € 1 40 - 1.300 U/min ISO 30 465 x 230 x 380 mm 1000 x 280 mm 2.2 kW 1400 mm 1300 mm 2200 mm 1120 kg 90 ° 115 - 1.750 (115, 230,290 U/min Milling head rotatable and swivellable +/- 90° with manual quill 120 mm travel range Spindle sleeve feed takes place via a turnstile or with the fine feed by means of a handwheel Spindle head 350 mm manually traversable Max. drilling capacity 30 mm Manual tool clamping vertical/horizontal by means of tightening screw Automatic feed in X Axis,(8) 12 - 370 mm/min Coolant unit Chip tray Lighting Bledpfx Ajyrhr Dek Eeg 1x Collet chuck set 1 Stk Drill chuck with mounting 4 Milling cutter holders Does not comply with the German UVV & Austrian AMVO

Condition: excellent (used), MIKRON WF 3 DP universal milling machine TECHNICAL DATA Angular table Bledjlnfggopfx Ak Eog clamping surface: 450 x 800 mm number of T-slots: 9 T-slot distance: 45 mm Weight: 144 kg Machine dimensions: 1475 x 1770 x 2000 mm Weight: 1800 kg Connected load: 8,7 kW Milling spindle drive spindle speed: 21 steps speed range: 25 - 2500 /min step jump: 1,258 power of spindle motor: 3,3 / 4,0 kW tool holder: ISO 40 / M16 quill movement, vertical: 110 mm Feed drive Feed rates in all 3 axes: Infinitely variable Feed range: 1 - 2000 mm/min Rapid traverse in all feed directions: 3000 mm/min Torque at motor longitudinal + transversal: 4 Nm Vertical: 8 Nm Displacement travel Longitudinal movement of the clamping table (X axis): Automatic: 400 mm Transverse movement of the clamping table (Y axis): Automatic: 400 mm Vertical movement of the clamping table (Z axis): Automatic: 385 mm For the correctness, completeness and topicality of the data we do not take over guarantee

Condition: used, CNC Lathe DMG MORI SEIKI - GILDEMEISTER Type CTX 310 ecoline Machine No. 8044001846E Year of manufacture: 2013 CNC Control: SIEMENS Sinumerik 840D sl Swing diameter over bedway cover: 330 mm Swing diameter over cross-slide cover: 260 mm Centre height max.: 190 mm Centre distance max.: 580 mm Turning diameter max.: 200 mm Longitudinal slide travel (Z-axis) max.: 450 mm Cross-slide travel (X-axis) max.: 160 mm Spindle bore through draw tube: 51 mm Spindle bore through front bearing: 100 mm Spindle speed max.: 5,000 rpm Feed rate X and Z: mm/min. Rapid traverse X-axis: 30 m/min. Rapid traverse Z-axis: 30 m/min. Feed force X and Z: 4,500 Nm Tool turret: 12 stations Driven tool stations: 6 stations Tool holder cylindrical VDI 30 mm Spindle drive motor power at 100% duty cycle: max. 11 kW Spindle drive motor power at 40% duty cycle: max. 16.5 kW Power supply: 400 Volt, 50 Hz, 21 kVA - CNC control SIEMENS Sinumerik 840D sl, system software NCU V04.04+SP02+HF02 - Controlled C4-axis chuck position and C1-axis for tool turret - 3-jaw chuck AUTOGRIP Ø 210 mm with 1 set of hard jaws and 15 sets of soft jaws Bodpfx Akoyk Hrgs Eslg - AUTOGRIP hydraulic hollow clamping device - Clamping force adjustment for regulating clamping pressure - Tool turret SAUTER, type 0.5.901.020 with 12 stations (6 driven) - 20 tool holders VDI 30 - Tailstock MK 4 - Indirect measurement system via rotary encoder - Chip conveyor with integrated coolant system - Workpiece residual life display and piece counter as large display on machine enclosure - Control cabinet cooling unit - 9,716 total operating hours (main switch on), of which 3,322 spindle hours as per counter - Operating instructions and manuals Machine footprint with chip conveyor (L x W x H): 4,500 x 2,600 x 2,050 mm Base machine space requirement (L x W x H): 2,900 x 2,150 x 2,050 mm (3,200 kg) Chip conveyor space requirement (L x W x H): 3,350 x 850 x 1,650 mm (500 kg) Weight: approx. 4 tons Very good condition

Condition: excellent (used), Year of construction: 2009, Control: Emco Easycycle Working Area Travel in X: 450 mm Travel in Y: 400 mm Travel in Z: 350 mm Table Clamping area (L x W): 800 x 400 mm Max. table load: 300 kg Spindle Speed range (stepless): 10 – 5,000 rpm Distance to table surface: 40 – 440 mm Tool holder: SK 40 Bledpfx Aksyvrkao Eog Quill stroke: 80 mm Swiveling vertical milling head: +/- 90° Feed Feed range: 10 – 5,000 mm/min Rapid traverse X/Y/Z-axis: 2,000 / 5,000 mm/min Feed force X/Y/Z: 10 / 10 / 15 kN Dimensions Dimensions (L x W x H): 1,980 x 2,030 x 1,990 mm Machine weight: 2,270 kg