Used Ruhrmann Pressen Esr15H for sale (198)

Condition: good (used), Year of construction: 2000, pressing force: 15 t, table width: 300 mm, table length: 400 mm, Hydraulic clutch CE-Safety 2e hand opperator system Adjustable stroke / ram  Full set books / drawing / CE-Mark Note in the Neck / Throath machine is repaired ! Only EUR 5500 Capacity Kg: 15000 Table Length: 400mm Table Width: 300mm Hole in table:150mm Working height:280mm Throat: 2170mm Stroke: 50mm Ledpfsyc R Nmsx Anuoac Ram adjustment:4 - 80mm Length: 1500mm Width: 1500mm Height: 2100mm Weight: 1200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2000, Capacity Kg 15000 Table Length 400 mm Table Width 300 mm Hole in table Ledpfxsyc R Uio Anuoac 150 mm Working height 280 mm Throat 2170 mm Stroke 50 mm Ram adjustment 4 - 80 mm Hydraulic Clutch CE-Safety 2e hand opperator system Adjustable stroke / ram  Full set books / drawing / CE-Mark Length:1500mm Width:1500mm Height:2100mm Weight:1500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2014, condition: ready for operation (used), Offered is a hydraulic four-column press. Column spacing: 570mm, table size: 392 × 238mm, ram force (holding): 3500kN, ram stroke (holding): 50mm, ram force (separating): 2500kN, ram stroke (separating): 100mm, installation height: 553mm, cutting impact stroke: 20mm, working speed: max. 30mm/s, control: PLC. Equipped with pump unit, oil cooler (3kW), dust protection for upper cylinder. Weight: approx. 13000kg, overall dimensions X/Y/Z: approx. 1290mm/860mm/3250mm. Inspection possible by arrangement. Ljdpfx Aey Uydxjnueac

Condition: used, Year of construction: 2021, functionality: fully functional, pressing force: 500 t, ME-Pressen Portal Straightening Press – 500 t – 2,000 × 850 mm – Stroke 1,300 mm For sale is a hydraulic portal straightening press from ME-Pressen with a pressing force of 500 t. This machine is specifically designed for straightening and bending operations and is equipped with an integrated tooling clamping device as well as parallel control for bending blades. Thanks to its movable table, sliding cylinder, and robust construction, it is ideally suited for flexible applications in toolmaking and series production. ==== Technical Data & Information: Hydraulic Portal Straightening Press – 500 t ==== General Specifications - Manufacturer: ME-Pressen - Model: Portal Straightening Press - Design: Gantry press - Machine type: Sliding table press / Straightening press - Pressing force: 500 t (5,000 kN) - Machine weight: approx. 25 t - Dimensions (L × W × H): approx. 1,500 × 3,000 × 4,300 mm - Number of operator sides: 3 ==== Working Area - Max. opening width: 1,500 mm - Stroke: 1,300 mm - Min. opening: 200 mm - Table height above floor: approx. 850 mm - Open height: 1,500 mm ==== Table & Movement - Table size: 2,000 × 850 mm - Table hydraulically traversable: 700 mm outward - Table in grid construction - Cylinder horizontally traversable via rack and pinion ==== Speeds - Closing speed: up to 17 mm/s - Opening speed: up to 44 mm/s - Pressing speed: depending on load ==== Hydraulics & Performance - Pressure setting: 80–500 t via rotary control - Pressure build-up time: max. 3 sec. - Free breakout force: max. 800 kN - Oil temperature monitoring available - Lubrication via grease nipples ==== Construction & Features - Integrated tool clamping device - Parallel holding for bending blade - Induction-hardened cylinder - Machine body powder-coated / double painted - T-slots to customer specification ==== Operation & Safety - Remote control - Robust construction for industrial applications ==== Accuracy - Deflection: ≤ 1.2 mm/m (at 70% load) Ljdpswgakvsfx Anusac ==== Straightening operations, bending processes, toolmaking, series production, heavy-duty forming Hydraulic press, portal press, straightening press, sliding table press, industrial press, forming press Looking for a hydraulic press tailored to your application? Contact us for a custom offer. Our hydraulic presses are constructed according to German machinery guidelines as well as European Machinery Directive (2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they fully comply with the Brazilian national safety standard NR 12, which builds on these standards. Our core strengths are special purpose machine construction and press automation. We offer customized hydraulic presses at surprisingly competitive prices. For the hydraulics, we predominantly use components from leading European manufacturers.

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, machine/vehicle number: W202001, table length: 800 mm, table width: 550 mm, Equipment: documentation/manual, H-Frame Press – 30 t – Double-column Press – 800 × 550 mm – Versatile Assembly & Production Press For sale: hydraulic double-column press (H-frame press) with a pressing force of 30 t. The machine is highly versatile and can be used as an assembly press, small batch press, hand-loading press, vulcanizing press, or heated platen press. This is an approximately 2.5-year-old, unused machine with zero operating hours, offered with full warranty. Inspection is possible at our warehouse in Ennepetal. ===== Technical Specifications & Information: Hydraulic Double-Column Press – 30 t ==== General Information - Design: Double-column press (H-frame) - Pressing force: 5–30 t (adjustable) - Machine weight: approx. 2,000 kg - Paint finish: RAL 7035 (Light Grey) / RAL 2009 (Orange) ==== Working Area Lasdpfx Asu U Ey Ijnujc - Table size: 800 × 550 mm (additional variant: 700 × 500 × 70 mm) - Ram plate: 700 × 500 × 80 mm - Max. distance table/ram: 500 mm - Stroke: 500 mm - Front opening width: 820 mm - Table height: 800 mm ==== Speeds - Approach speed: approx. 45–50 mm/sec - Return speed: approx. 40–55 mm/sec ==== Hydraulics - Operating pressure: up to 300 bar - Hydraulic pump: ASC, 28.5 l/min - Motor power: 11 kW - Oil tank: approx. 100 l - Valves: Bosch Rexroth ==== Construction & Guidance - Cylinder: Ø 110 mm (piston), Ø 70–75 mm internal - Guide columns: Ø 50 mm - Ram guided by 2 columns - Robust machine frame - Rear and side guards fully enclosed ==== Control & Operation - Pressing pressure adjustable via rotary control - Adjustable two-hand operation (3 m supply cable) - Position limitation via cam switch - Travel limitation via movable sensors - Automatic positioning to defined stroke points - Resettable piece counter ==== Safety - Light curtain 500 mm (14 mm resolution, finger protection) - Reach-under protection - Optional reach-over protection - Emergency stop switch - Certified safety inspection ==== Equipment - Control cabinet technology from brand manufacturers - Illumination in press workspace - Eject chute in table ==== Options - Heated platens: 500 × 500 mm (up to 200 °C, with controller & timer) - Commissioning & operator training ==== Lead Time & Service - Delivery time: approx. 6 weeks (without heated platens) - Heated platens: approx. 8 weeks - Customer service: Dresden, Hamburg, Ennepetal, Waibstadt, Göppingen, Gelsenkirchen ===== Assembly work, small batch production, forming applications, vulcanizing, hot pressing Hydraulic press, hydraulic press, double-column press, H-frame press, assembly press, small batch press, vulcanizing press, heated platen press, industrial press Are you looking for a hydraulic press customized for your application? Contact us for a tailored offer. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC regulations, and EU safety standards. Additionally, our presses exceed both Canadian and European safety requirements, as they fully comply with the Brazilian occupational safety standard NR 12, which builds upon these regulations. Our core strengths are special machine engineering and press automation. We offer custom-built hydraulic presses at surprisingly attractive prices. The hydraulic systems primarily use components from leading European manufacturers.

Condition: good (used), Year of construction: 1970, Offer 25020 Technical data: - Pressure force 200 t - Projection 400 mm - Table size approx. 1000 x 750 mm - Hole in the table approx. 320 x 220 mm - Ram surface 940 x 400 mm - Ram adjustability 100 mm - Stroke adjustment 20 - 130 mm - Drive 380 V / 10 kW - Space requirement approx. W 1400 x H 2980 x D 2900 mm Lodpfx Anevnmblousac - Weight approx. 13000 kg

Condition: as good as new (ex-display), Year of construction: 2025, Hydraulic SPS press 100to (1.000KN) pressing force Siemens SPS1200 series Screen 10" Beijer stroke 400mm table top 790mm x 600mm Speed forward 110mm Speed return 140mm Light curtain Sick Remote maintenance module built in Rexroth hydraulics with cooler Available from week 46 fairground Stuttgart Lajdpfx Anonp Ndhsujc Modifications can be realized after request if necessary

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: MP2510892, input voltage: 400 V, Hydraulic Clinch Press Miller MP645E, with vibration conveyor and automatic feeding tool for the installation of self-clinching studs, nuts, stand offs and other fasteners. Technical data: Press force 2-97KN (10 ton) Throath depth 650mm Zylinder stroke 200mm Travel speed 110mm/sec. Cycle time 3sec. 1200/hour Size H 2140mm x W 1070mm x D 1550mm Lajdpfjirnaqox Anusc Weight ca. 1500 Kg Electrical connection 400V, 3.0 KW Guaranteed, lasting reliability through the use of high-quality components Simple handling and short changeover times Low maintenance and service requirements Very flexible due to the large number of possible applications Automatic feeding system, touch screen control etc. optional available Energy-saving, solid design with the energy efficiency of a hydraulic system Electronic and mechanical safety system for 100% safe processing of conductive and non-conductive materials Connection to the usual power supply (400V) Processing of all common press-in elements thanks to high press-in force, press-in nuts up to M12, threaded bushes up to M10, threaded bolts up to M8 Continuous adjustment of the press-in force, repeatability +/-1%

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: MP2506991, Hydraulic Clinch Press Miller MP645E, optional with feeding bowl for the installation of self-clinching studs, nuts, stand offs and other fasteners. Technical data: • Press force 2-57KN (6 ton) • Throath depth 450mm • Zylinder stroke 200mm • Travel speed 120mm/sec. • Cycle time 3sec. 1200/hour • Size H 2200mm x W 800mm x D 960mm • Weight ca. 680 Kg • Electrical connection 400V, 2.2 KW The offered Miller Press is a demonstration machine from April 2022. It has been used for the installation of samples into customer sheets. In October the machine was exhibited on the Blech Expo in Hannover. Optional the machine can be equipped with an automatic vibration conveyor and automatic feeding tool. Thanks to the efficient hydraulic system, the high pressing force of 57KN and the repeatability of +/-1%, the machine can be used for most applications in a sheet metal processing company. Lasdpfxeirm R Ee Anusc

Year of construction: 1977, condition: ready for operation (used), Pressing force: 160kN, stroke speed: 200-1000/min, with automatic handling/ infeed and documentation. Lasdpfopgycbsx Anujc

Year of construction: 2019, condition: ready for operation (used), Pressing force: 4000kN, stroke: 300mm, table dimensions: 3100x1400mm, controls: Siemens S7, length: 4560mm, width: 2045mm, height: 4605mm, weight: 65t, with transfer system and soud-proof cabin. Laedpfx Aelyr Adjnusc

Condition: ready for operation (used), Year of construction: 1962, Eccentric press with black shield, Pressure capacity 15 t, Stroke adjustment from 5 - 60 mm, Table dimensions: 550 x 360 Laedpfju Rrrfox Anusc Dimensions: W 800 x D 1200 x H 2200 mm Weight 800 kg,

Condition: used, Year of construction: 1994, machine/vehicle number: 6915, functionality: unexamined, operating hours: 27,436 h, pressing force: 80 t, stroke length: 300 mm, table width: 500 mm, table length: 700 mm, ram plate width: 400 mm, ram plate length: 500 mm, distance table to ram: 500 mm, oil tank capacity: 485 l, overall weight: 6,500 kg, Equipment: documentation/manual, safety light barrier, We are offering this used HYDRAP PRESSEN HPSK80 hydraulic press, year of manufacture 1994. Manufacturer: HYDRAP PRESSEN Model: HPSK80 Year of manufacture: 1994 Condition: used Category ID: 1330 Type ID: 1231 Machine type: hydraulic press Laedpfx Anox Ti Aueujc If you have any questions or require further information, please feel free to contact us by message or phone.

Condition: used, Year of construction: 1998, pressure 80 t throat 335 mm Lajdpfx Anouild Aousc stroke 8 - 100 mm no. of strokes 60/90 Hub/min table surface area 900 x 670 mm hole in the table 280 x 200 mm dayligth max. 450 mm ram adjustment 80 mm ram surface 700 x 450 mm tool dimension, max 700 x 450 mm weight of tools max. 140 kg total power requirement 11,07 kW weight of the machine ca. 6,5 t dimensions of the machine ca. BxLxH 1,72 x 2,0 x 2,82 m

Condition: new, CAPTRON sensor pushbutton two-hand control for punching and pressing machines / SCB4-185Z-S + SCA4-185Z-S + MCR-225 two-hand safety relay + LKW-SCA-5 cable socket with 5m cable + LKW-SCB-5 cable socket B with 5m cable, unused in opened original packaging, 100% functional, delivery as per photos. Laedpfx Ansy Np Iiouoc

Condition: used, No. 04493 Combined machine Steko 228 P.B.S. Pressing - Sanding - Sawing Used - Pneumatic veneer press with electric heating Aluminium heating plates 2280 x 1000 mm LW Lower plate extendable Opening width approx. 145 mm Total pressing pressure 40 tons, specific pressing pressure max. 2 kg/cm2 Heating 2x 1,8 kW - Long belt sander 3 kW Table 2600 x 750 mm LW, extendable Sanding height 200 mm Belt length 6800 mm Belt width 120 - 150 mm Left/right rotation, speed 19 m/s - Sliding table saw / veneer saw / edging saw 2.2 kW With pneumatic pressure beam Cutting length approx. 2600 mm, cutting height adjustable 0 - 60 mm Saw blade diameter max. 250 mm With chain feed - Extraction for sander and saw 0.55 kW Delivery rate approx. 11 m3/min Push-button control with main and emergency stop switches Machine on trolley Installation footprint according to manufacturer 7.5 m2 Transport dimensions approx. 3900 x 2100 x 1400 mm LWH Weight approx. 2500 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale Ljdpfx Aoxl Ha Senuoac For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Year of construction: 2026, condition: new, Do you want the BEST price/performance ratio? Contact us! Machines direct from the manufacturer! THE ORIGINAL MADE IN AUSTRIA! DUOFORMER - Heating – Forming- Pressing! The HEATING UNIT for all thermoplastic materials up to 230°C and The VACUUM PRESS for daily use! • No tricky placing of pressing layers • No sliding of the former • effortless closing and opening • pressing of M-shapes • operating from all 4 sides DUOFORMER S VERTICAL- Producing without compromises! Now on sale! Vertical opening: work piece height up to 850 mm Clamshell opening: See other sales offer on this platform! Pressing surface LxW: 2880x1280mm Heating surface LxW: 2600x1250mm Overall dimensions LxWxH: 3400x1750x1500mm • Heating drawer +230°C – 16kW • 40 m³/h high performance vacuum pump (BECKER) • 4 FESTO pneumatic-cylinders • Trussed pressing frame • Two hand safety operation • Motion signal Equipment: Vacuum table with silicone membrane and MEMBRANE FAST-CHANGE SYSTEM •Fully welded, sturdy and robust steel construction •pressure up to 9 t/m² (-900 mbar rel.) •analogue vacuum pressure gauge •mechanical vacuum pressure regulator •transparent Silicone membrane up to 230°C, 780% elongation, 40 Shore-A •robust, heat resistant phenolic resin ply working surface with integrated air suction channels, thickness 16mm •extra vacuum connector (e.g. for external vacuum bag, vacuum clamping) •with intecrated forklift pockets •incl. swivel castors Heating drawer with CAS-heating system (Controlled Air Stream) •material thickness: 0 - 70 mm •heating power: max temperature +230°C •2 circulation hot air fans •pull-out working surface with grating, grid 30 x 30 mm •easy removable heating drawer Control unit with 4“ SIEMENS touch panel •hinged control cabinet on the right side •variable temperature control up to + 230 °C •temperature control with timer and alarm •complete with cable and plug Electrical connection3~ 400 V, 50/60 Hz, 17.5 kW Duoformer production capabilities: ● Pre-heating and forming of solid surface materials such as: CORIAN; HIMACS; KERROCK; HANEX; STARON; MISTRAL; AVONITE; TRISTONE; VELSTONE; WILSONART; GETACORE; RAUVISIO; VARICOR; PLEXICOR; MEGANITE; KRION; LIVINGSTONE; MARLAN; EOS; FORMICA; MYSTERA, etc. ● Pre-heating and forming of all other thermoformable materials such as: ABS, PMMA (Plexiglas, Perspex, Lucite), PET-G (Vivak), PE, PS, PP, PVC-U, PC (Makrolon), UPM-GRADA, RESYSTA, NFPP, etc. ● Vakuumpress for bonding, coating, edge banding, flat pressing, forming, gluing, laminated bending, pressing, spot on profile fitting, veneering Other dimensions on request! DUOFORMER Maxi Clamshell opening: work piece height approx. 650 mm Vertical opening: work piece height approx. 1000 mm Pressing surface LxW: 3380x1380mm Heating surface LxW: 3000x1250mm Heating drawer +230°C – 24kW Vacuum pumps 40m³/h, 80m³/h, 100m³/h Overall dimensions LxWxH: 3900x1600x1500mm DUOFORMER Mega For a whole length of solid surface material boards! Lasdpfxsiquxge Anuoc Clamshell opening: work piece height approx. 650 mm Vertical opening: work piece height approx. 1000 mm Pressing surface LxW: 4150x1780mm Heating surface LxW: 3850x1250mm Heating drawer +230°C – 32kW Vacuum pumps 80m³/h, 100m³/h, 140m³/h Overall dimensions LxWxH: 4700x2050x1500mm UNIVERSALFORMERS Direct – Honest - Experienced

Condition: used, Year of construction: 1978, Technical details: Pressure: 160 t max. ram stroke: 500 mm distance table/ram: max. 2880 mm Laodpfx Aju Nfq Esnuoc ram speed - forward: 0,03 m/sec ram speed - reverse: 0,04 m/sec ram surface area: B: 1720 x H: 1000 mm ram diameter: Ø 259 mm ram hole: Mitten-Loch: Ø180 mm operating pressure: 260 atü bar total power requirement: 11,0 kW weight of the machine ca.: 18,8 t dimension machine xH: 7,5 x 1,6 x 1,6 m HYDRAULIC HORIZONTAL MULTI-PURPOSE PRESS TÜV test until 02/2024 Details of the counter frame: Size W: 1720 x H: 690mm Counter support U-support = Ø 225mm x depth = 450mm Manual horizontal displacement: max. length 2880mm Information on the guide cylinder: 2 cylinders opposite each other; size Ø230mm x length 3350mm, 7 cylinders divided by adjustment groove Ø 170x 50mm, can be moved manually with adjustment ring Information on the mounting bed: Steel construction, welded with 2 guide grooves 20mm; size LxWxH: 4000 x 1400 x 200mm *

Condition: used, Year of construction: 2005, Chamber press - baling press Austropressen APV 300, used 🧰 Product features • Manufacturer: Austropressen • Model: APV 300 • Condition: Used item, see photos • Color: turquoise • Year of manufacture: 2005 • Dimensions: approx. 1620 x 1260 x 2920 mm • Own weight: 1650 kg • Pressing force: 300 kN • Cycle time: 45 seconds • Power: 5.5 kW • Voltage: 400 V (12.5 A) • Bale weight: 300 - 400 kg 💰 Price: €7,200 net excl. VAT Laodpfjxvy N Uex Anuoc • Quantity discount: on request • Shipping: Europe-wide on request • Delivery time: Immediately available • Inspection and collection: possible at any time by appointment Constantly over 5,000 linear meters of pallet racking from various manufacturers in stock (Technical data, details, and prices subject to change and error, as well as prior sale! See our GTC, all prices excl. VAT ex stock.)

Condition: good (used), Year of construction: 1963, Stroke = 250 mm On request, transport and loading can be organized across Europe at an additional cost. Prices excl. VAT Inspection possible by appointment. Contact us – our team will be happy to assist you. Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, ETC. Do you need a high-quality yet affordable machine for your production? Or do you want to sell your equipment? Lsdsy H Ic Hopfx Anuoac For further information or contact options, please use the contact form.

Year of construction: 2008, condition: good (used), Horizontal baling press Laedog Ibt Nopfx Anuec Build in 2008 Bale size 800x1000x1400 Loading height 1250mm

Condition: used, Year of construction: 1985, Offer 25995 Technical Data: - Pressing force 1600 KN / 160 t - Pressure regulation 0 - 160 t - Stroke length approx. 0 - 600 mm - Max. installation depth with straightening bar 1050 mm - Max. installation depth without straightening bar 1400 mm Laodpfewp Eguex Anuec - Stroke speed approx. 0 - 0.6 m/min - Tool height approx. 400 mm - Drive 380 V / 11 kW - Space requirement approx. B 3600 x H 1400 x T 1800 mm - Weight approx. 6500 kg - Accessories - height-adjustable side support rollers - Straightening tool for straightening long material - Straightening bar 1300 x 400 mm with over - Threaded spindle, laterally adjustable supports

Condition: new, Filter cloths for all filter presses in all sizes and qualities, short delivery times, ask us Lsdpfxsg Azmmj Anusac Location is 58762 Altena

Condition: new, The scope of delivery includes: Lajdpfjzcuqbex Anuec 1x Top tool, new Tool system: UKB system Trumpf / Wila / LVD with Simple Clamp Type: 15320-500 (15320X) Angle: 28° Radius: R 1.0 mm Length: 500 mm Width: 24 mm Height: 120 mm Load capacity: 800 kN/m max. Material: 42 CrMo4 Weight: ≈ 10 kg Internal reference: DE-KW23-26-03 Explanation: The tool is used in bending presses (also known as die-bending presses) for industrial sheet metal processing. The standardized tool holder, "Simple Clamp safety button," allows the operator to install and remove the segment vertically at any desired point of the press clamping mechanism. Note: This tool is being sold as part of a customer return (purchase date: April 2026) and is therefore offered at a reduced price. Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery.

Year of construction: 2026, condition: new, functionality: fully functional, total length: 640 mm, total width: 735 mm, total height: 170 mm, machine/vehicle number: 2026, Stainless steel pedestal for bread presses / dough dividing machines Lasdpfx Aed Egxfenuoc suitable for all gänigen bread presses massive art work equipped with 2 to easy lifting with the pallet truck Stainless steel for optimum cleaning Dimensions: 735 x 640 x 170 mm, WxDxH