Used Rhtc 30 T / Mv for sale (82,985)

Condition: new, pressure 30 t stroke 350 mm table surface area Arbeitsbreite 750 x 260 mm pressure 221 bar oil volume 37 dm³ work speed max. 9,8 mm/sec return speed 14 mm/sec total power requirement 3 kW Nwjdpfx Aoi A S I Dsf Ssl weight of the machine ca. 385 kg Inner diameter of the cylinder [mm]: 130 Piston rod diameter [mm]: 55 Diameter piston head [mm]: 80 - Integrated pressure gauge - Pressure regulator - Hydraulic unit with variable speeds - Working table adjustable in height - Joystick to control piston and speed The workshop press (30T) has a fixed cylinder and a high adjustable work table (motorized). Equipped with pressure regulation, Pressure gauge, variable speed and a joystick to move the piston up and down to move off. With this joystick you can also control the speed adjust, making this motorized hydraulic press perfect for precision work is suitable.

Year of construction: 1985, condition: used, Drilling process: single-lip gundrilling, operating method: rotating tool, number of working spindles: 1, nominal drilling depth: approx. 750mm, drilling range for solid drilling in steel: approx. 30mm, drilling range for counterboring in steel: approx. 40mm, spindle drive: 11kW, max. spindle speed range I: 1800rpm, max. spindle speed range II: 5700rpm, max. feed rate range I: 320mm/min, max. feed rate range II: 160mm/min, rapid traverse: 3.5m/min, clamping table X/Y: 420mm/1280mm, cross-slide table manually operated, max. transverse travel: 400mm, table clamping surface X/Y: 600mm/600mm, high-pressure coolant system for deep-hole drilling oil with 1000l coolant tank, flow rate: approx. 2-94l/min, max. pressure at max. flow rate: 45bar, pump power: 11kW, separate control cabinet. The machine underwent an extensive partial overhaul in 2018, during which the machine was disassembled and cleaned, all guideways and support surfaces were ground and partially scraped, motors were inspected and fitted with new bearings, the drilling spindle was fitted with new bearings, the ball screw incl. nut was replaced, the pump motor was overhauled, the wiper set was replaced, and the machine was repainted and all functions were checked and rectified. Including extensive accessories. Documentation available. Inspection possible by arrangement. Nwsdpjzu Szysfx Af Ssl

Condition: excellent (used), Year of construction: 2011, Winmax control Nwodpfxszwhk Ne Af Sol Travel paths X/Y/Z: 760 x 510 x 610 mm Table clamping surface: 1020 x 510 mm Spindle speed: 12,000 min-1 Tool magazine for 24 tools, SK 40 Through-spindle coolant 20 bar

Condition: used, functionality: fully functional, Year of construction: 2006, operating hours: 13,137 h, load capacity: 3,000 kg, lifting height: 6,455 mm, free lift: 2,074 mm, fuel type: gas, mast type: triplex, construction height: 2,841 mm, fork carriage width: 1,150 mm, fork length: 1,200 mm, drive type: Treibgas, Internal combustion engine forklift Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Nwsdpfoz Ecvgox Af Sjl Mast type: Triplex Transmission: Hydrostatic / 2-pedal Condition: Ready for use and fully functional Technical condition: good Front tire type: Superelastic Front tire size: 7.00-12 Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire size: 23x9-10 Rear tire condition: 80 - 100% Description: Delivery includes a new FEM 4.004 inspection certificate. If you have any further questions, please call us. In addition to this model, we have approximately 150 other material handling vehicles in stock. Visit our website for leasing and financing options. We would be happy to provide you with a quote for delivery at favorable conditions. Trade-in of Linde equipment is also possible, even if you do not purchase a device from us. The stated operating hours were recorded at the time the listing was created. Subject to prior sale, changes and errors. Side shifter, pre-installed side shifter 3rd valve, 4th valve, rear work light, front work light, heater, full cabin, full free lift, safety light, seat heating.

Condition: used, Year of construction: 2007, Used Golfetto Sangatie Stone Catcher Multiple units available Drive 2x 3kW Used for destoning wheat Nwjdpfsxft Ddox Af Ssl Measurements in attached file Gravity Selector Dryostoner

Year of construction: 2004, condition: excellent (used), Twin-screw extruder Rollepaal T-REX 2-90-30 Nwjdpfxoxcp T Nj Af Sol Application PVC PIPE The extruder is in very good condition and ready for operation. Location: Germany:D-26345 Bockhorn-Grabstede, Bahnhofstr 6 The extruder is my property

Condition: new, Year of construction: 2026, pressure 200 t stroke 400 mm table surface area Arbeitsbreite 1300 mm pressure 243 bar oil volume 64 dm³ ajustment speed 5,73 mm/sec work speed 1,84 mm/sec return speed 7,08 mm/sec total power requirement 3,0 kW weight of the machine ca. 1690 kg Inner diameter of the cylinder [mm]: 320 Piston rod diameter [mm]: 140 Diameter piston crown [mm]: 175 - adjustable cylinder (left-right) - Integrated pressure gauge - Pressure regulator - Two-speed hydraulic unit - Working table adjustable in height - Joystick to move the piston up / down - Hand pump for precision work - with digital display This 200 ton hydraulic press is equipped with a movable cylinder (left- right), a height-adjustable work table, a pressure regulator, 2 Nsdpfjt I D Thex Af Sswl speeds, a joystick and a hand pump for precision pressing fitted.

Year of construction: 2023, condition: new, pressure 30 t throat 180 mm stroke 8-76 mm no. of strokes 80-200 Hub/min ram - range of adjustment 60 mm table surface area 360x580 mm table height 840 mm hole in the table Ø 110 mm ram surface 250x350 mm tool hole in ram Ø 40 mm total power requirement 3 kW Nwsdpfx Afop Uduhs Sjl weight of the machine ca. 1,8 t dimensions of the machine ca. BxTxH 1350x1200x2100 mm

Condition: ready for operation (used), Year of construction: 2011, operating hours: 37,463 h, functionality: fully functional, machine/vehicle number: M34216027081EHC, travel distance X-axis: 750 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: Hurco Winmax, spindle speed (max.): 15,000 rpm, TECHNICAL DETAILS X-axis travel: 750 mm Y-axis travel: 510 mm Z-axis travel: 510 mm Table width: 1,000 mm Table length: 510 mm Max. spindle speed: 15,000 rpm Max. table load: 1,350 kg Nsdpfxoy R Rn Hj Af Sswl Number of tool changer positions: 24 MACHINE DETAILS Control model: Hurco Winmax Tool holder: SK 40 Dimensions & Weight Installation dimensions (W x D x H): approx. 2.80 m x 2.30 m x 2.75 m Transport weight: approx. 4,700 kg EQUIPMENT 4th CNC rotary axis Chip conveyor Coolant unit

Condition: used, Year of construction: 2010, Milling machines Travel distance X: 760 mm Travel distance Y :510 mm Travel distance Z: 610 mm HSC-machines Number of axis: 3 milling machine / machining center Control: Hurco WinMax spindle chuck: SK - A40 Nwedev D U Apspfx Af Sel spindle revolutions: 12000 rpm table size X: 1020 mm table size Y: 508 mm max. workpiece weight: 1350 kg tool changer: 24 - time input Power : 13,5 kW Torque: 214 Nm Rapid traverse: 35 m/min spindle cooling chip conveyor

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1992, operating hours: 5,216 h, load capacity: 3,000 kg, lifting height: 3,270 mm, fuel type: gas, mast type: telescopic, construction height: 2,160 mm, motor manufacturer: Nissan, fork length: 1,200 mm, tire condition: 40 %, front tire type: superelastic tires (black), front tire size: 23x9-15, rear tire type: superelastic tires (black), rear tire size: 6.50 - 10, overall weight: 4,220 kg, total height: 2,160 mm, total length: 2,800 mm, total width: 1,250 mm, fuel: liquid petroleum gas (LPG), Equipment: sideshift, KOMATSU FG 30 T -11E – LPG forklifts TECHNICAL DATA Lifting capacity: 3.000 kg Lifting height: 3.270 mm Closed height: 2.160 mm Mast: Standard (2W327) Fork length: 1.200 mm Fork carriage: 3 A Drive: 4-Zyl. Treibgas Engine: Nissan Tyres: Superelastik SE 23x9-15 (40%) / 6.50 - 10 (30%) Service weight: 4.220 kg Length: 2.800 mm Width: 1.250 mm Year of manufacture: 1992 Operating hours: 5.216 h Condition: working condition EQUIPMENT 3rd valve, Front work lights, Overhead guard cover, Front windscreen, Load backrest ATTACHMENTS Load backrest, Sideshift Internal no.: 1202056 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin. Nsdpfx Asz Aqqcjf Sewl

Condition: used, Year of construction: 2013, MKW Collating Machine, 16 stations 3-sided trimming possible 4 Hohner flat heads 4 Hohner ring heads 2 old no-name stapling heads Spare blades All manuals included Njdpfxjz D Dtqe Af Sewl All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: excellent (used), Year of construction: 2006, LWB STEINL VCRS-T 300/36 T / Machine like new Year of construction: 2006 Injection unit: Metering volume: 36 ccm Clamping unit : Nwedpozy H N Nefx Af Sol clamping force: 30 t Ejector: hydraulic Clamping unit: hydraulic Control system: LWB ECO Additional equipment: Hydraulic core pull x 1 Control unit with air valve The injection unit is made of bimetal Dimensions: Weight: 3000 kg All offered machines are started by our service technicians before sale. It is possible to obtain a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: On request

Condition: new, Year of construction: 2024, pressure 30 t Nwsdpfx Afsvfhpxe Sol throat 180 mm stroke 8-76 mm no. of strokes 80-200 Hub/min ram - range of adjustment 60 mm table surface area 360x580 mm table height 840 mm hole in the table Ø 110 mm ram surface 250x350 mm tool hole in ram Ø 40 mm total power requirement 3 kW weight of the machine ca. 1,8 t dimensions of the machine ca. BxTxH 1350x1200x2100 mm

Condition: new, Year of construction: 2024, pressure 30 t throat 180 mm Nwsdpevfhqvefx Af Sel stroke 8-76 mm no. of strokes 80-200 Hub/min ram - range of adjustment 60 mm table surface area 360x580 mm table height 840 mm hole in the table Ø 110 mm ram surface 250x350 mm tool hole in ram Ø 40 mm total power requirement 3 kW weight of the machine ca. 1,8 t dimensions of the machine ca. BxTxH 1350x1200x2100 mm

Condition: new, Year of construction: 2024, pressure 30 t throat 180 mm stroke 8-76 mm no. of strokes 80-200 Hub/min ram - range of adjustment 60 mm table surface area 360x580 mm Nsdpfx Aevfhq Asf Sjwl table height 840 mm hole in the table Ø 110 mm ram surface 250x350 mm tool hole in ram Ø 40 mm total power requirement 3 kW weight of the machine ca. 1,8 t dimensions of the machine ca. BxTxH 1350x1200x2100 mm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2015, operating hours: 11,043 h, load capacity: 3,000 kg, lifting height: 6,450 mm, free lift: 1,800 mm, fuel type: gas, mast type: triplex, construction height: 2,600 mm, motor manufacturer: VW, fork length: 1,200 mm, tire condition: 20 %, front tire type: superelastic tires (black), front tire size: 27 x 10 - 12, rear tire type: superelastic tires (black), rear tire size: 23 x 9 - 10, overall weight: 4,955 kg, total height: 2,600 mm, total length: 2,850 mm, total width: 1,250 mm, fuel: liquid petroleum gas (LPG), Equipment: cabin, sideshift, LINDE H 30 T -02 – LPG forklifts TECHNICAL DATA Lifting capacity: 3.000 kg Lifting height: 6.450 mm Closed height: 2.600 mm Free lift: 1.800 mm Mast: Triplex (3F645) Fork length: 1.200 mm Fork carriage: FEM 3 A Drive: 4-Zyl. Treibgas Engine: VW Tyres: Superelastik SE 27 x 10 - 12 (20%) / 23 x 9 - 10 (60%) Service weight: 4.955 kg Length: 2.850 mm Width: 1.250 mm Year of manufacture: 2015 Operating hours: 11.043 h Condition: working condition EQUIPMENT 3rd valve, 4th valve, Rear work lights, Front work lights, Heating, Full cabin ATTACHMENTS Double clamp, Sideshift, Double pallet clamp Internal no.: 1202070 Location: 14974 Ludwigsfelde bei Berlin Nwjdpfx Aez Ap Nwof Sel Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: good (used), Year of construction: 2012, HAAS ST-30 CNC lathe with C-axis and driven tools Year: 2012 Technical details: Swing diameter 806mm, Maximum cutting diameter 533mm, Distance between centres 762 mm Maximum cutting length 660 mm Bar capacity 76 mm Spindle Motor 22,4 kW Max spindle speed 3400 rpm C-axis and driven tools Turret 12 positions Tailstock Accessories/options: 1 axial driven tool holder 1 radial driven tool holder 10 pieces static tool holders Nwsdpfx Aszz Agtsf Ssl Tool presetter, Renishaw Foot pedal for chuck and tailstock operating Coolant tank Swarf conveyor Under power in our warehouse.

Condition: used, functionality: fully functional, machine/vehicle number: 330136700218, Year of construction: 2008, operating hours: 868 h, load capacity: 3,000 kg, fuel type: electric, construction height: 1,300 mm, fork length: 1,150 mm, drive type: Elektro, Low lift truck Fahrgestellnummer: 330136700218 Condition: Ready for use and fully functional Nedpfx Afsuhxxko Sowl Technical condition: good Battery Volt: 24V Battery Ah: 345Ah Battery year of construction: 2008 Description: Still EGU 30 No.: R0354 Year of construction: 2008 Operating hours: 5253 The device is visually in very good and technically in good condition. Charger on request. Fast and uncomplicated transportation possible by arrangement! The advertisement only serves to identify the device! A detailed description of the condition and possible equipment will be provided individually on request! Subject to errors and prior sale, sale only to tradespeople. All used goods are sold without warranty or guarantee. If you have not found the forklift you are looking for, please contact us. We have a large selection of other equipment on site.

Year of construction: 2010, condition: like new (used), functionality: fully functional, MFT 30/300S Set – Used Professional Equipment For sale, a professional set in excellent condition, ready for immediate use. Nwsdpfxezncrpe Af Sel The set includes: MFT 30/300S Big Bag FAS 300 with mobile suction unit This set provides a complete solution, ideal for professionals seeking high-performance, robust, and operational equipment for use in a workshop or on a construction site. Optional: Rapid Vario 70 Primus available as an additional unit for an extra €2,600. The equipment has been carefully maintained, offering excellent value for money compared to new equipment. Sale as a set is preferred.

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 5480, EUROMAC XT FLEX 12S 1500/30-2500 CNC punching / nibbling machine. Technical data: - Year of construction: 2022 - Serial number: 5480 - Max. punching force: 30 t - Working range X axis: 2500 mm - Working range Y axis: 1500 mm - Multitool holders included: XMTE6 and XMTE10 Nsdpfxez Aaw Sj Af Sjwl - Chute door for extraction of parts up to 1000x1500 mm, with part detection Machine is located in Ivanjica, Serbia. Further information, additional photos and inspection on request.

Year of construction: 1990, condition: excellent (used), O F F E R Subject to prior sale and errors excepted, we can offer you, without obligation, the following ex-stock: D E G E N Manual Cutting, Pointing, and Cylindrical Grinding Machine for Ejector Pins Model: T Year of manufacture: 1990 _____ Grinding carriage center height: approx. 200 mm Grinding wheel Ø x bore: 200 x 30 mm Grinding wheel speed: approx. rpm Grinding wheel drive power: approx. kW Workpiece headstock center height: 160 mm Workpiece headstock longitudinal adjustment: approx. 100 mm Workpiece headstock transverse adjustment: approx. 200 mm Workpiece headstock swiveling either side: approx. 2 x 30° Collet chuck capacity: 0.5 – 20 mm Weight: approx. 500 kg Accessories / Special equipment: • Workpiece headstock swiveling for pointing and deburring • Collet chuck with approx. 10 different collets • Plexiglass safety guard for grinding wheel • Compact, free-standing on sturdy base • Optional cross-slide feed unit Condition: good to very good – under power, ready for demonstration Nwsdpfx Afexzuuvs Sel Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to receiving your order. Further tool grinding machines available from stock – please enquire!

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, operating hours: 3,366 h, load capacity: 3,000 kg, lifting height: 4,900 mm, fuel type: gas, mast type: telescopic, construction height: 3,150 mm, motor manufacturer: VW, fork length: 1,196 mm, tire condition: 80 %, front tire type: superelastic tires (black), front tire size: 27 x 10 - 12, rear tire type: superelastic tires (black), rear tire size: 225/75 - 10, overall weight: 4,575 kg, total height: 3,150 mm, total length: 2,700 mm, total width: 1,300 mm, fuel: liquid petroleum gas (LPG), LINDE H 30 T - 02 – LPG forklifts TECHNICAL DATA Lifting capacity: 3.000 kg Lifting height: 4.900 mm Closed height: 3.150 mm Mast: Standard (2W490) Fork length: 1.196 mm Fork carriage: 3A Drive: 4-Zyl. Treibgas Engine: VW Tyres: Superelastik SE 27 x 10 - 12 (80%) / 225/75 - 10 (25%) Service weight: 4.575 kg Length: 2.700 mm Width: 1.300 mm Year of manufacture: 2013 Operating hours: 3.366 h Condition: working condition EQUIPMENT 3rd valve, Rear work lights, Front work lights, Overhead guard cover Nwjdpfx Afjz Aqryo Sel Internal no.: 1202060 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, input frequency: 50 Hz, type of input current: AC, total length: 700 mm, total width: 600 mm, total height: 1,220 mm, DGUV certified until: 07/2027, Equipment: CE marking, documentation/manual, Loading oven, Eloma Backmaster EB 30 T, double station TOP convection oven, countertop model for 3 baking sheets with exhaust hood on top stainless steel construction Nsdpfx Afsxxgmre Sewl only available from us, DGUV V3 certified 2 x 230V connection Dimensions: 600 x 700 x 1220 mm, W x D x H Used equipment with warranty + spare parts service Quality from a specialist company & service partner! Benefit from over 35 years of experience! Options: Baking sheets Water filter Base frame Maintenance contract Delivery service Spare parts box for increased safety Service package Training & commissioning We have many more ovens in stock!

Condition: excellent (used), Year of construction: 2019, HAAS ST-30 – 2019 – BMT65 / driven tools / C-axis / only 1385 cutting hours For sale: HAAS ST-30 CNC turning center, manufactured in 2019. The machine is in very good technical and visual condition, with very low operating hours – only 1385 hours of actual cutting time. A rich configuration including a BMT65 tool turret, driven tools, and a C-axis allows for not only turning operations but also milling, drilling, and threading without the need to transfer the workpiece to another machine. TECHNICAL DATA * Manufacturer: HAAS Automation * Model: ST-30 * Year of manufacture: 2019 * Date of manufacture: 07/2019 * Control: HAAS CNC * Chuck: 254 mm / 10” * Spindle nose: A2-6 * Maximum spindle speed: 3400 rpm * Spindle power: 22.4 kW / 30 HP * Maximum torque: 407 Nm at 500 rpm * Maximum bar diameter: 76 mm * Spindle bore diameter: 88.9 mm * Tool turret: BMT65 * Driven tools * C-axis * Hydraulic tailstock * Machine without Y-axis WORKING RANGE * X-axis travel: 324 mm * Z-axis travel: 660 mm * Maximum workpiece diameter above frontrest: 806 mm * Maximum machining diameter with BMT65 turret: 457 mm * Maximum machining length: 660 mm * Maximum bar diameter: 76 mm * Distance between centers: approx. 762 mm EQUIPMENT Nwodpfx Aoz D E Ayof Ssl * BMT65 turret * Driven tools * C-axis * Tool probe * Hydraulic tailstock * High-pressure coolant system * Through-tool coolant * Belt chip conveyor * Mist collector/filtration system * Rigid tapping * Spindle orientation M19 * VPS – Visual Programming System * Wireless network * 1 GB memory * Compensation tables MACHINE HOURS Data read directly from the control: * Power-on time: 13,052 h * Cycle time: 1,764 h * Actual cutting time: only 1,385 h Please send a specific price offer.