Used Renner Reko H 510/150 for sale (61,940)

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 2 h, pressure (max.): 14 bar, REKO H 510/150 piston compressor incl. operating hours counter incl. 150 litre compressed air tank Hours: 2.00 Bh Year: 2024 Maximum pressure: 14 bar Flow rate (12 bar): 360 l/min Nominal power: 3.0 kW Mains voltage: 400 V Compressor speed: 1200 min-1 Compressed air tank: 150 liters Dimensions: 1345 x 457 x 1054 mm Weight: 115 kg Csdpsvr Eicsfx Ailorh We always have a wide range of new and used compressors in stock!

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 2 h, functionality: fully functional, machine/vehicle number: 002331512500001478, pressure (max.): 14 bar, REKO H 510/150 piston compressor incl. operating hours counter incl. 150 litre compressed air tank Hours: 6.00 Bh Year: 2025 Maximum pressure: 14 bar Flow rate (14 bar): 500 l/min Nominal power: 4.0 kW Cylinder : 2 Mains voltage: 400 V Compressor speed: 785 min-1 Compressed air tank: 150 liters Codpfx Aioypm Sdelorh Dimensions: 1345 x 457 x 1112 mm Weight: 135 kg We always have a wide range of new and used compressors in stock!

Condition: excellent (used), Viessmann Vitoplex heating boiler 150 kW (0069) oil burner Csdpfxox Htirs Ailjrh

Year of construction: 2022, condition: as good as new (ex-display), REKO 510-B Auxiliary compressor (reciprocating compressor) incl. operating hours counter incl. 3 litre compressed air tank Hours: 0.75 Bh Year: 2022 Maximum pressure: 10 bar Flow rate: 380 l/min Credpopyhpdefx Ailjh Nominal power: 3.0 kW Mains voltage: 400 V Compressor speed: 1200 min-1 Compressed air tank: 3 liters Dimensions: 735 x 620 x 698 mm Weight: 45 kg We always have a wide range of new and used compressors in stock!

Condition: excellent (used), Low temperature boiler,Buderus SB615 power 510KW ,120Grad ,5,5Bar,gas or oil burner possible Codpfx Aieqww Icslorh

Condition: like new (used), Year of construction: 2020, functionality: fully functional, type of input current: three-phase, Zhejiang Baina 150 20D 1000Kg/h extruder The extruder is almost new and is available immediately with a few operating hours. Manufacturer: Zhejiang Baina Type: E150-01-00 Year of manufacture: 2020 External dimensions (L × W × H): 4200 × 1600 × 1500 mm Side rollers; the driving force is provided by the screw, with active dosing Coordinated operation of the feed roller gear drive and the screw drive, with automatic lubrication system Screw material: 38GrMoAcA Screw hardness: HRC 65–68 Steel bushing hardness: HRC 65–70 Nitriding depth: 0.4–0.7 mm Screw design: Design with suction groove for vacuum suction Pressure control, pressure protection value adjustable between 0–35 MPa; with temperature sensor. Screw diameter: 150 mm Screw speed: 1–50 rpm Maximum output: Approx. 1000 kg/h Number of heating stages / output: 7 × 6 kW Cooling stage: 1 stage (side rollers) Vacuum pump output: 2.2 kW Temperature control Automatic heating and cooling control with electromagnetic valve Circulation pump: Weile Cooling water pressure: 0.15–2 kg/cm² Temperature control accuracy: ±1 °C Screw and gear connection: Involute gear connection Motor and reducer drive: Belt drive Hardened gear type: ZLYJ420-28-I (involute gear reducer) Motor power: 160 kW Crsdpfx Aioy Ez Erjljh Total installed power: 204 kW Speed ​​control: Frequency converter control

Condition: like new (used), Staff Ice System BTX150 Ice Cube Machine / Ice Maker 150 kg/24h Year 2022 Technical Specifications Gelato BTX150 A Staff Ice System ice machine for the production and storage of ice cream. Designed for manufacturing and storing ice cream. Automatic extraction. Stirrer with durable polyethylene blades. The double lid allows ingredients to be added during the process. Vertical tank for complete control of the production process. 50 customizable operating programs. Technical features: Maximum ice cream production per cycle: 2 liters. Ice cream production: 15 l/h. Dimensions: 43.5 x 59.2 x 59.5 cm. Crjdpfxeyzc Rus Ailsh

Condition: ready for operation (used), Year of construction: 2008, Holzma automatic panel saw PROFI HPP 510/56/56/P Year: 2008 Technical data Positioning accuracy +/- 0.1 mm 5 air cushion tables, 2,810 x 650 mm 1 fan, adjustable pressure Cutting length: 5,600 mm Cutting width (pusher travel): 5,600 mm 11 combination profile rails, dual-track 9 clamps, two-finger type Max. cutting height: 125 mm Saw carriage feed (forward): 0.1 – 150 m/min Saw carriage feed (return): constant 150 m/min Pusher feed (forward/return): max. 90 m/min 11 combination profile rails, dual-track Max. forward speed of 25 m/min is mandatory within the EU Automatic pressure beam height control Main saw motor (frequency-controlled): 21 kW Speed: 1,700 – 4,200 rpm Scoring saw motor: 2.2 kW Operating voltage: 400 V / 50 Hz (+10 / -5%) Connected load: 30 kW Working height: 1,020 mm Main saw blade: 450 x 4.8 x 60 mm Cjdpfx Aijz Iliuslerh Scoring saw blade: 180 x 4.8 – 5.8 x 45 mm Compressed air: 6 bar Air consumption: 210 NL/min (approx., at extraction port) 30 – 32 m/s Negative pressure: 1,200 Pa Extraction volume: 5,800 m³/h Chip duct connection: 1 x 200 mm Pressure beam connection: 2 x 150 mm Quality standards: CE tested, GS tested, FPH dust-tested. Stock no.: 2003040BX

Year of construction: 2017, condition: like new (used), used RENNER REKO 550 / 50VE compressed air compressor 10 bar with petrol engine for use without power connection (for example emergency service vehicles of breakdown service or Tire service) The compressor is used, built in 2017 and has 50 operating hours. Crsdpfed H Dr Sex Ailjh The gasoline-powered, robust reciprocating compressors not only offer you the usual advantages of the RENNER systems, but also flexibly available compressed air on construction sites, in service vehicles and in many other applications "without power outlets". They guarantee a constant compressed air supply regardless of location. The small version is mobile and quickly offset by the ergonomic handle. Thanks to its compact design, the large version can be easily moved with pallet trucks or forklift trucks and loaded onto vehicles. VE = electric start. Please note: will be delivered without battery Technical specifications: Suction capacity 550 l / min Eff. Delivery quantity 400 l / min Gasoline engine 3.6 kW Honda power unit with 4.8 hp Max. Pressure 10 bar Cylinders / stages 2/1 Speed ​​1400 rpm Sound level 98 dB (A) Compressed air tank 50 l Dimension L x W x H 810 x 460 x 830 Weight 70 kg Visit our shop in Erlangen. We have a large selection of new and used compressors.

Condition: excellent (used), Year of construction: 2015, ARBURG A 520 H 1500-170 e² HIDRIVE (25.008 h) (S&P 3794) Manufacture year: 2015 Operating hours: 25,008 Stunden Screw: 25 mm Injection pressure: 2500 bar Stroke volume: 59 cm³ Clamping Force: 150 t Tie bar distance: 520 x 520 mm Mould installation height min.: 250 mm Plate distance max.: 950 mm Dimensions: 4800 x 1700 x 2400 mm Eeight: 6000 kg Crjdpfsz Hx S Tjx Ailoh Connected load: 29 kW Robot interface EM67, Accumulator, Airvale etc... Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2003, operating hours: 21,200 h, functionality: fully functional, machine/vehicle number: 190332, Equipment: documentation/manual, Injection molding machine 3 colors (horizontal /vertical/ and 3. in L-position with protective housing) The machine can be used as a 2 colour/2K machine and the 3rd can be deactivate immediately available from our warehouse in Hannover Make: Arburg Type: 420C 1000-150/150/60 year of construction 2003 Control: Selogica Hours: 21200 h without turntable +++++clamping unit +++++ Clamping force: 1000 kN / 1000 to. tie bar distance: 420 x 420 mm platen size: 795 x795 mm tool height 300 mm distance platens max. 950 mm ejector 225 mm /66 kN ++++Injection unit 1 (150 unit) ++++ Screw size: 15 mm (high shut-off fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 2 (150cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 3 (60cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2080 bar Extras 2x core pull 1 ALLROUNDER 420 C 1000 - 150 / 150 / 60 fully hydraulic screw injection molding machine mold clamping force 1000 kN voltage 400 V / 50 Hz 1 Vertical injection unit instead of clamping tie bars mounted on carriers for 2nd injection unit, manually operated, working position adjustable between 70 and 250 mm VE-404/02 1 Open nozzle 15 mm low-wear, without heating tape (1.SPE 150) VE-902/00 1 Technology level 2 - servo-controlled Hydraulic system -two control pumps for controlled machine movements, path-dependent, controlled target ramps. The build-up of the tool clamping force programmable + controlled. Clamping force is servo-controlled via second pump. The nozzle contact force programmable. The contact force can be set manually, the value is maintained in a controlled manner. This technology level is a prerequisite for simultaneous movements of the nozzle, ejector and optional core pullers. Including equipment package for "extended travel movements". VE-132/03 1 Technology level 3 Hydraulic system with 3 control pumps for simultaneous movements of the main axes and for faster movements of the secondary axes. For the 2-K machines as hydraulic system for the 2nd injection unit (prerequisite is technology level 2, VE 132/03) VE-130/40 1 heating tape for open nozzle VE-320/00 1 Injection unit 150 for vertical injection into mold partition for 2-component processing VE-136/02 1 position controlled screw with control valve at the injection unit, incl. controlled back pressure, nozzle contact force manually adjustable VE-561/20 1 position-controlled screw with control valve for multi-component machines, incl. controlled back pressure, nozzle contact force manually adjustable - for injection unit 2 VE-561/30 Codpogrzh Ejfx Ailerh 1 injection unit 60 for horizontal injection into mold partition as 3rd injection unit for multi-component processing (L-position) VE-906/00 1 for VE 906/00 injection unit 60 in L-position: unit lowered by 70 mm, incl. special parting line full protection VE-907/00 1 Plasticizing barrel set 15 mm (without nozzle), with advanced feed and pressure reducing valve, in highly wear resistant design 1 Open nozzle 15 mm wear-resistant, without heating band (L-position) VE-909/00 1 Nozzle tip with radius 15 (L-position) VE-910/00 1 Heating tape for open nozzle (L-position) VE-911/00 1 Position-controlled screw for the third injection

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, We offer you: CNC machining center, universal, with pallet automation Manufacturer: DMG MORI Type: DMU 50 3rd with PH Cell 150 Year of manufacture: Machine 2023 / Automation 2025 Control system: Celos with Siemens 840D sl Operate Technical data: Travel ranges: X-axis: 650 mm Y-axis: 520 mm Z-axis: 475 mm B-axis: -35 to +110° C-axis: 360° Main spindle: Speed range - main spindle: 20 - 15,000 rpm Drive power - main spindle (100/40%): 21 / 16 kW Work table: Table dimensions: D 630 x 500 mm Tool changer: Tool holder: SK 40 Number of tool positions: 120 Feed rates: Rapid traverse (x/y/z): 42 m/min Operating hours: approx. 12,320 h Spindle hours: approx. 4020 h Technical features & accessories: - Active spindle cooling - Direct path measuring system in all axes - Scraper-type chip conveyor with cleaned filter screen - Internal coolant supply (IKZ) 40 bar, consisting of: - Paper band filter - 600 l tank - Cabin roof - Rotary through-feed in the spindle - Double filter Cjdpfxjz A A Dxj Ailsrh - Blow-off air through the spindle center - Rotating viewing window - Flushing gun for chip removal - Oil and emulsion mist separator - Infrared measuring probe, manufacturer Heidenhain TS 460 (if available) - Tool measurement system, manufacturer Heidenhain TT160 (if available) - Preparation for 3D quickSET - Automation interface PH Cell, consisting of: - Interface - 4-channel rotary through-feed - Automatic loading door - Operating mode 4 - Tracy surface interpolation - Pallet loading and unloading system PH 150, consisting of: - 10-position pallet storage - External electronic handwheel (if available) Accessories, tools and clamping devices shown in the pictures are only included in the scope of delivery if this is stated in the additional information. Subject to change and errors in the technical data and information, as well as prior sale!

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, power: 4 kW (5.44 HP), volume flow: 0.57 m³/h, operating pressure: 11 bar, pressure (max.): 11 bar, type of cooling: air, Equipment: documentation/manual, type plate available, Renner REKO 700D/90 - Demonstration machine Crjdpfxeu Ttlcs Ailjh Mobile piston compressor with tank With all safety fittings and electrical connection cable with plug and Condor pressure switch with operating hours counter as standard Compressed air tank equipped with safety valve, tank pressure gauge and condensate drain valve Fully automatic operation thanks to pressure switch with start-up relief, motor protection and on/off switch With upscale equipment for universal use - oscillating metals for stationary installation included in the scope of delivery With V-belt drive, 2 cylinders arranged in series for particularly quiet operation Low compressor speed - thus protecting the compressor components, lowering the noise level and reducing vibrations Option at extra cost: filter pressure reducer for regulated compressed air and compressed air cleaned of condensate, dirt and oil from a tank volume of 50 liters With device supply line and air outlet via safety coupling NW 7.2 Suction capacity 727 l/min Eff. Delivery rate 570 l/min Nominal power 4.0 kW Voltage 400 V Max. Pressure 11 bar Cylinder/stages 2/2 Speed 1000 rpm Sound level 95 dB(A) Compressed air tank 90 l Dimensions L x W x H 1030 x 483 x 1100 Weight 128 kg

Condition: good (used), Year of construction: 1999, Screw compressor, Renner, screw compressor RS-PRO 7.5, soundproofed, incl. refrigerant dryer ECOTROC KTD-B100 – used: Price ex works: €2,950.00 (net)! Manufacturer: Renner Type: RS 7.5-10 Year of manufacture: 1999 Serial No.: 1992 Article number: 07500001 Rated power: Motor speed: Crjdpfx Aijzbydqeljh Max. operating pressure: 10 bar Power consumption: 7.5 kW Delivery rate: 950 l/min Operating hours: approx. 4,342 h (as of 21.04.2026) Weight: 198 kg Incl.: Manufacturer: KSI FILTERTECHNIK Type: ECOTROC KTD-B100 Serial No: 31-11-MA11834 Max. pressure: 16 bar Nom. capacity: 97 m³/h Max. amperage: 2.1 amps Fuse amperage: 4.0 amps Refrigerant: R134a Refrigerant quantity: 0.75 kg Voltage: 230V / 1 / 50 Hz Power: 0.35 kW Condition: good Available: from approximately August 2026 Location: Leipzig

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, clamping force: 1,500 kN, screw diameter: 50 mm, clearance between the columns: 520 mm, displacement volume: 392 cm³, injection pressure: 2,000 bar, injection weight: 359 g, mold height (min.): 250 mm, plate length: 695 mm, plate width: 695 mm, total length: 5,205 mm, total width: 1,670 mm, total height: 2,200 mm, overall weight: 6,500 kg, Clamping force: 150 t Year of manufacture: 2012 Injection shot weight: 359 g Injection unit 800 Screw diameter: 50 mm Specific injection pressure: 2000 bar Injection volume: 392 cm³ Injection shot weight: 359 g Screw L/D ratio: 24 Tool closing unit 1500 Clamping force: 150 t Tool plate dimensions: 695 x 695 mm Distance between columns: 520 x 520 mm Tool height: 250...650 mm Opening stroke: 400 mm Credpfx Aiez Iz Exjlsh Maximum plate distance: 650...1050 mm Weight: 6500 kg Dimensions (m) L x W x H: 5.25 x 1.67 x 2.20 m Control system: Selogica Equipment: Hydraulic core 12-zone hot runner system Accumulator Frequency converter Hidrive drive 4 x pneumatic valve

Condition: used, Year of construction: 2007, operating hours: 30,271 h, functionality: fully functional, machine/vehicle number: 147, travel distance X-axis: 2,400 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,950 mm, controller manufacturer: Fanuc, controller model: 15i, total height: 4,500 mm, total length: 5,500 mm, total width: 6,500 mm, table load: 8,000 kg, rotational speed (max.): 4,000 rpm, overall weight: 40,000 kg, spindle speed (max.): 4,000 rpm, operating hours of spindle: 30,251 h, coolant supply: 70 bar, spindle nose: BT 50, number of spindles: 1, number of slots in tool magazine: 120, Equipment: chip conveyor, documentation/manual, Good used MITSUI SEIKI HU 150 A for sale - Fanuc 15i control - Knoll high-pressure system, 200 liters, 70 bar - Chip conveyor Credpfx Aisz Iyd Toljh - Tool magazine, 120 positions, BT 50 - NC table, 0.001° accuracy - 2 pallets, 1500 x 1500 mm - Extended Z-axis - Machine can be inspected while powered on - Year of manufacture: 2007 - Linear scales in all axes

Condition: excellent (used), Year of construction: 1995, Weishaupt L3Z/A oil burner Model: D Capacity: 65 kg/h Year of manufacture: 1995 Please arrange an inspection by phone only! We prefer to sell to dealers, commercial businesses, or for export. All information is provided without guarantee and subject to errors and prior sale. The seller assumes no liability for typing or data transmission errors. Of course, we will also take care of all formalities. Loading possible. Cjdpfxjig Txbo Ailsrh

Condition: refurbished (used), Year of construction: 2020, operating hours: 1,181 h, functionality: fully functional, working width: 510 mm, area performance: 2,300 m²/h, input voltage: 24 V, water tank capacity: 42 l, battery voltage: 24 V, battery capacity: 105 Ah, brushing unit diameter: 510 mm, operation weight: 230 kg, Hako Scrubmaster B45 CL TB 510 Refurbished scrubber-dryer with new batteries, new suction turbine, and more – includes 6 months warranty and a new DGUV V3 electrical inspection with test certificate. Working width without squeegee: 51 cm Working width with squeegee: 86 cm Max. area performance: 2,700 m²/h Fresh water tank: 45 L Recovery tank: 45 L Drive: Yes Crodpfx Ajyanpfoileh Drive type: Electric 24V Battery: 2 x 12V 105 Ah GEL batteries Installed new parts / performed repairs: - Suction motor 24V 400W (new) - 2 x 12V 105 Ah GEL batteries (new) - Brush deck / brush motors reconditioned incl. new ball bearings, carbon brushes, and bumper bar - All hoses replaced (new) - Disc brushes (new) - ACLA rubber wheels (new) - Squeegee rubbers (new) - Fresh water filter (new) In addition, we offer: Service, repair, and sales for all common Hako models.

Condition: good (used), Year of construction: 2006, machine/vehicle number: 91426, Offer 25227 Technical specifications: - Pressing force: 150 t - Working width: 3600 mm - Clearance between uprights: 3150 mm - Table width: 180 mm - Throat depth: 250 mm - Installation height: 325 mm - Approach speed: 70 mm/sec - Working speed: 7 mm/sec - Return speed: 60 mm/sec - Ram stroke: 120 mm - Adjustable backgauge range: 120 mm - Motor power: approx. 7.5 kW - Oil capacity: approx. 300 l - Space requirement: approx. W 3850 x H 2300 x D 1600 mm - Weight: approx. 8700 kg Includes: - Swivel arm – operator panel with ATL 550 control - For pressing depth & backgauge - Motorized backgauge Credpfxswvih Nj Ailjh - Crowning device - FIESSLER Lasersafe - 4-way universal die, segmented punch tool & “gooseneck” die - Two-hand operation desk, foot pedal,

Condition: like new (used), Year of construction: 2022, immediately available, warranty 12 months, excellent condition Forced convection oven for solvent-containing substances according to DIN EN 1539, 4 charging carts available on request (see image) - Max. temperature 150°C - Usable volume 1875 liters - Internal dimensions: W 1250 x D 1000 x H 1500 mm - External dimensions: W 1765 x D 1425 x H 2300 mm - Guide rails and recesses for loading the oven with a charging cart - Maximum permissible amount of flammable substances at 150°C: 83.9 g Codpfsxbtvfex Ailerh - Minimum exhaust air flow rate at 20°C: 360 m³/h - KS controller 40-1 for simple temperature control with defined ramp or hold times (1 program, 4 segments) - Controller upgrade to JUMO DICON available on request - Additionally, a simple timer is integrated, which can be started via front buttons - Connection: 30 kVA, 3 x 400 V, 57 A, 50 Hz - Heating power: 36 kW - Weight: 820 kg - Includes 4 charging carts, each with 12 trays and 24 insertion levels, available in stainless steel - Documentation, CE declaration - Electrically tested and with current DGUV test report Inspection in our warehouse by appointment. Oven, drying oven, baking oven, heating oven, industrial oven, solvent oven, paint drying oven, annealing oven, heating oven, temperature oven, drying cabinet, chamber oven, chamber dryer, sintering oven, convection drying cabinet, convection oven

Condition: excellent (used), For sale: a Rietschle VFT 40 (111) vacuum pump, manufactured by a reputable German company. This unit is designed for industrial applications requiring vacuum generation, including packaging machines, printing machines, woodworking machines, CNC machines, and vacuum-based transport systems. The pump is equipped with a three-phase Flender ATB-Loher motor with a power of 1.5 kW and is mounted on a robust mounting plate. Technical specifications: Manufacturer: Rietschle Model: VFT 40 (111) Year of manufacture: 1996 Country of manufacture: Germany Type: vacuum pump Performance: 40 m³/h (50 Hz) 48 m³/h (60 Hz) Maximum vacuum (ultimate pressure): 150 mbar (abs) Motor power: 1.5 kW (50 Hz) / 1.8 kW (60 Hz) Rotational speed: 1420 rpm (50 Hz) 1680 rpm (60 Hz) Power supply: 3×400 V Motor protection class: IP54 Serial number: 1749048 Condition: Used. Visual condition is consistent with the photos. Robust construction, ready for further operation. Credpfx Aisziw N Sjljh

Condition: excellent (used), For sale: a professional, two-spindle eyeletting/riveting machine, Constantin Hang Typ 150 3P, manufactured in Germany in 1983. This machine is designed for the simultaneous installation of two eyelets or rivets, significantly increasing work efficiency. The machine is used in bookbinding facilities, printing companies, and factories producing binders, folders, calendars, tags, and other paper products. It is equipped with two working units, an adjustable table, and precise guides that allow for accurate material positioning. Technical specifications: Credpsziwnnsfx Ailoh Manufacturer: Constantin Hang Maschinenfabrik Model: Typ 150 3P Year of manufacture: 1983 Serial number: 35805 Country of manufacture: Germany Type: two-spindle eyeletting/riveting machine Two working heads Adjustable work table Guides and material position adjustment Robust industrial construction Electric drive Condition: used Applications: eyelet installation, riveting, binder production, folder production, calendars, promotional tags, cardboard packaging, bookbinding and printing. The machine is sold in the condition shown in the photos.

Condition: refurbished (used), Year of construction: 2012, operating hours: 2,134 h, Hako Scrubmaster B45 TB 510 Refurbished scrubber-dryer with new batteries, new suction turbine, and more – includes 6 months warranty and new DGUV V3 electrical inspection with test certificate. Working width without suction bar: 51 cm Working width with suction bar: 86 cm Max. area performance: 2000 sqm/h Fresh water tank: 45 L Crodju Sr U Nopfx Ailoh Recovery tank: 45 L Drive type: Electric 24V Battery: 2 x 12V 85Ah GEL batteries Installed new parts / repairs carried out: - Suction motor 24V 400W new - 2 x 12V 85Ah GEL batteries new - Brush deck / brush motors overhauled including new ball bearings, carbon brushes, and bumper strip - All hoses new - Disc brushes new - Support wheels new - Squeegee blades new - Fresh water filter new Additionally, we offer: Servicing, repair, and sales for all common Hako models.

Condition: excellent (used), Year of construction: 1998, Weishaupt L5 Z/D oil burner Capacity: 15-100 kg/h Year of manufacture: 1998-2006, multiple units available Please arrange an inspection by phone. We prefer to sell to dealers, businesses, or for export. All information is provided without warranty, subject to errors and prior sale. Crsdpfx Aieh Ibgpslsh The seller assumes no liability for typographical errors or data transmission errors. We will, of course, take care of all formalities. Loading possible.

Condition: used, Year of construction: 2022, operating hours: 4,800 h, Equipment: ABS, all wheel drive, Volvo L 150 H wheel loader Year of manufacture: 2022 The machine is in very good condition and has only 4,800 operating hours. Air conditioning, Credszhrckepfx Ailjh Central lubrication system Tires have approximately 85% tread remaining.