Used Regloplas 90 Xl M for sale (75,839)

Year of construction: 2008, condition: good (used), heating cooling device Regloplas 90 XL M 90°C 21,5 kW year: 2008 price: 2.150 € Lrsdpeh Uubhsfx Ahker contact: Mr. Rainer Eckerle

Condition: used, empty load weight: 6,075 kg, maximum load weight: 28,925 kg, overall weight: 35,000 kg, axle configuration: 3 axles, next inspection (TÜV): 03/2027, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 435/50 R19,5, color: red, Year of construction: 2023, Equipment: ABS, Color: RAL 3002 Carmine Red Front/rear panel: Purple / white Extension ladder at the rear, door latch on the side Support wedges with holder, aluminum side impact protection, galvanized steel underride protection, quarter panel fenders in front of the 1st axle and behind each axle, with anti-spray flaps behind each axle, rear impact protection, Pallet stop on both sides, approximately 15-20 mm high, in a bolted design, loading height is reduced by approximately 15-20 mm, plastic toolbox Axles + Suspension SAF disc brake axles, "axle/chassis laser measured" to reduce tire wear and fuel consumption, air suspension, 1st axle automatic lift axle, including forced lowering and starting assistance, Activation via "3x braking" (starting assistance is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Axle lift below the recommended ride height, therefore no warranty for tire damage Braking system 2-line compressed air braking system, color-coded lines for easy servicing, spring brake parking brake, 2 fail-safe coupling heads in front, without connecting line, EBS, electronic braking system with EBS socket in front, without connecting cable. Note: The trailer may only be pulled by towing vehicles that ensure the effectiveness of the ABS! with lifting and lowering valve Ride height in conjunction with lift axle, when the lift axle is raised, the loading or overall height increases by 50 mm (in Mega Flex only at low ride height or saddle height), vehicle - driving stability system Wheels and tires 435/50 R19.5", manufacturer's choice, steel rims, factory silver Electrical system Lrjdpfx Ahjzun I Asker 24 Volt, multi-chamber lights, yellow LED lighting on the side, 2 white position lights in front 2 white/red marker lights at the rear, 2 x 7-pole and 1 x 15-pole fail-safe sockets in front Floor Sieve-printed panels approximately 30 mm thick, on longitudinal supports for high point load capacity for forklift axle load up to max. 7100 kg Front wall / corner posts 2,580 mm high, corner posts steel in volume design, release device for side tarpaulin on front wall, "Crash-Blocker," bottom inside at approximately 140 mm height with steel impact protection Intermediate supports 3 pairs of sliding supports, fully adjustable in length, with 4-fold insertion pockets and a long pocket at the bottom, 3 pairs of support positions Insertion slats 5 rows of wooden insertion slats Rear wall / corner posts Corner posts at the rear, steel up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet Rear portal doors, 2-wing with 2 internal rotary rod locks each Tarpaulin Tarpaulin, with welded-in horizontal and vertical straps Tensioning closures made of stainless steel Roof Fliegl sliding roof, sliding cover, end lift at the rear that can be folded up, with a cover that can be slid from back to front, L-shaped roof beam for the automotive industry, inner width between the roof beams approximately 2,490 mm, tarpaulin color: white, roof non-elastic, little deflection of the roof beam during loading and unloading, EcoLift - lifting roof can be raised by approximately 380 mm, on both sides, with gas spring support, 3 driving positions in the front: interior height in the front approximately 2900mm/ 2950 mm / 3000 mm Optimal rain strip at the rear, on top of the end rail, above the doors Fliegl manufacturer certificate for body strength according to EN 12642 XL, Fliegl manufacturer certificate for body strength accor

Condition: excellent (used), 90 m pallet racking, Stow Used, very good condition, see photos. Height: 6 m Depth: 100 cm Beam length: 2.70 m Load capacity/bay: 3000 kg Frame: blue Beams: orange Negotiable price: €9,390 net ex warehouse Offer includes: + 33 units of pre-assembled frames, 12t bay load, depth 100 cm, height 6 m + 192 units of beams, length 2.7 m, 3000 kg load capacity/bay + 384 units of safety locks + 132 units of concrete anchors Load capacity sign Goods are in stock. Transport and installation possible upon request. Inspection possible at any time by appointment. Further information available upon request. We have over 5,000 m of pallet racking in stock at all times from numerous manufacturers. (Subject to changes and errors in technical data, details and prices, as well as prior sale! See our terms and conditions, all prices excluding VAT, ex warehouse.) Lenox Trading – Top warehouse technology & heavy-duty racking, used & new Description: Are you looking for high-quality warehouse racking for sale? With approximately 100 employees, Lenox Trading is one of the largest dealers of new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ AVAILABLE IMMEDIATELY: • Over 10,000 meters of racking available for immediate delivery • 20,000 m² of mezzanine floors & steel construction mezzanines immediately available • 30-50 semi-trailer trucks of goods turnover weekly for maximum selection 📦 OUR RANGE (BUY CHEAP ONLINE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving racking, tire racking or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, disassembly and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer warehouse technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND ACTIVITY: ONLINE AUCTIONS & LIQUIDATION Lrodpfx Ahoiwkn Reker For disassembly and clearance orders, we offer a complete all-round service package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete stock including complete clearance. 2. Commission-based auction: Conducting auctions on behalf of clients. Our full service provided by our own employees: cataloging, office preparation, inspection, goods dispatch, logistics, dismantling and complete clearance. Whether you came across us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking system – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: used, axle configuration: > 3 axles, permissible axle load (axle 1): 12,000 kg, permissible axle load (axle 2): 12,000 kg, permissible axle load (axle 3): 12,000 kg, first registration: 09/2004, total length: 16,800 mm, total width: 2,530 mm, total height: 1,750 mm, suspension: hydraulics, tire size: 295 / 80 / R22.5, color: red, Year of construction: 2004, General information Lrjdpfeznu U Nex Ahkjr Model code: ### Axle configuration Tyre size: 295 / 80 / R22.5 Make axles: BPW ECoPlus Brakes: drum brakes Suspension: hydraulic suspension Rear axle 1: Double wheels; Lift axle; Max. axle load: 12000 kg; Tyre profile left inner: 50%; Tyre profile left outer: 50%; Tyre profile right outer: 50%; Tyre profile right outer: 50% Rear axle 2: Double wheels; Max. axle load: 12000 kg; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30% Rear axle 3: Double wheels; Max. axle load: 12000 kg; Steering; Tyre profile left inner: 70%; Tyre profile left outer: 70%; Tyre profile right outer: 70%; Tyre profile right outer: 70% Rear axle 4: Double wheels; Max. axle load: 12000 kg; Steering; Tyre profile left inner: 50%; Tyre profile left outer: 50%; Tyre profile right outer: 50%; Tyre profile right outer: 50% Rear axle 5: Double wheels; Max. axle load: 12000 kg; Steering; Tyre profile left inner: 50%; Tyre profile left outer: 50%; Tyre profile right outer: 50%; Tyre profile right outer: 50% Weights Empty weight: 21.680 kg Condition General condition: average Technical condition: average Visual appearance: average Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: new, Technical data for the base plate: Manufacturer: Link 51 Type: Boltless XL suitable for frame profile: M,H,E and S Included in delivery: 01x base plate, new Material color: sendzimir galvanized Material thickness: 4 mm Total width: 96 mm Total depth: 137 mm Number of drill holes: 3 pcs. Drill hole Ø: 14 mm Weight: approx. 0.480 kg | pcs. Your contact at our company: Mr.: Andre Evering Lrsdpfxsrg D Awj Ahker Mr.: Mario Klöver Mr.: Falk Deutsch General information about the article: This item is only offered for collection. Any additional transportation or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: used, mileage: 179,500 km, power: 155 kW (210.74 HP), first registration: 03/2022, fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, color: white, gearing type: automatic, loading space volume: 11 m³, loading space length: 6,370 mm, loading space width: 2,480 mm, loading space height: 720 mm, Year of construction: 2022, Equipment: ABS, air conditioning, electronic stability program (ESP), ATEGO 1221 L, flatbed, 6.40 m, open * ADR type class FL, including EX/II, EX/III, and AT * Payload approx. 7,050 kg * ideal for scaffolding construction * Loading edge height approx. 0.89 cm * Vehicle no. for customer inquiries: 4794 * ADR type class FL, including EX/II, EX/III, and AT * Engine version Euro VI, E * Active Brake Assist * Air conditioning * Lane Keeping Assist * Environmental badge (green) * High Performance Engine Brake * Light sensor * Air suspension, rear axle * Rain sensor * Maintained according to service schedule * Stability Control Assist (ESP) * Electronic braking system with ABS and ASR * Driver's air-suspension seat, comfort * Power windows, electric, on both sides * Transmission G 90-6/6.70-0.73 * Mercedes PowerShift 3 * Locking system, with central locking * Cruise control * Three-seater * Storage compartment, high, on the engine tunnel * AdBlue tank 35 l * Roof hatch/ventilation flap, roof * Weight variant 11.99 t (4.4/8.1) * Main mirror, electric, driver's side * Heater, electronic compressed air supply unit * Plastic tank 120 l, left * Engine OM934, R4, 5.1 l, 155 kW (211 hp), 850 Nm * Payload-optimized 12-ton truck * Wheelbase 4220 mm * Tires tubeless, 245/70 R 17.5, front axle * S-cab ClassicSpace, 2.30 m, tunnel * Stabilizer, for extreme high load, rear axle * Front spring 4.4 t, parabolic * Preparation for toll collection * Tachograph digital, 2nd generation, ADR No liability for printing and typographical errors Sales only to commercial businesses Errors and prior sale are reserved* Changes, prior sale, and errors are expressly reserved. The description serves to identify the vehicle and does not constitute a guarantee in the legal sense of purchase. The description according to the purchase contract is decisive. Lrjdjzvr Ipepfx Ahkjr * TOP SERVICE + QUALITY * We will gladly provide you with a LEASING/FINANCING/RENTAL-PURCHASE offer * Guarantee insurance possible upon request from the insurer * TÜV / UVV LBW / Tachograph inspection and installation of OBU device by our partners on site * Customs license plates for 30 days * All customs documents for export are possible, but must be requested individually * TOLL for Toll-Collect can be booked in-house * Free transfer from Stuttgart Airport or Metzingen (Baden-Württemberg) train station * TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP number * * ---- Visit us on our website at * constantly over 200 vehicles in stock

Condition: good (used), mileage: 142,344 km, power: 150 kW (203.94 HP), first registration: 06/2022, fuel type: electric, tire size: 245/55R17, axle configuration: 4x2, wheelbase: 3,430 mm, fuel: electricity, color: black, driver cabin: day cab, gearing type: automatic, number of seats: 7, total length: 5,370 mm, total width: 1,930 mm, total height: 1,880 mm, loading space length: 770 mm, loading space width: 1,420 mm, loading space height: 1,280 mm, Year of construction: 2022, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, parking heater, power mirror, seat heater, traction control, = Additional Options and Accessories = - Tinted windows - None - LED lamp - Alloy wheels - Manual - Radio/cassette - Rearview camera - Lane keeping assist - Blind spot sensor = Notes = Configuration: 4x2, Unladen weight: 2660 kg, Gross vehicle weight: 3500 kg, Alloy wheels, Cruise control, Air conditioning, Number of airbags: 4, Auxiliary heater, Rear window wiper, Parking assist: Front and rear, Tinted windows, Electric windows, Electric mirrors, Radio/cassette, GPS navigation, Color: Black, Metallic, Rearview camera, Lighting type: LED lamp, Lane keeping assist, Air conditioning, Seat heating, Bluetooth, Blind spot sensor, Engine power: 150 kW (201 hp), Fuel: Electric, Transmission type: Automatic, Power steering, ABS, ASR, Starter battery, Body type: additionally extended, Side wall paneling, Roof rack: None, Side doors: 2, Side windows: 4, Rear closure: Tail lift, Central locking, Seats: 7, Seat cover: Leather, Seat adjustment: Manual, L3 7-seater 90 kWh 344 km WLTP, Empty, 2x Electric sliding door, Air conditioning, Camera, Cruise control, AC/DC, Tire type: All-season tires = Additional Information = Lsdpjy Iwdiofx Ahkerr General information Number of doors: 2 License plate: KLEYN1 Axle configuration Tire size: 245/55R17 Brakes: Disc brakes Suspension: Coil spring suspension Axle 1: Tire tread depth left: 5 mm; Tire tread depth right: 3 mm Axle 2: Tire tread depth left: 6 mm; Tire tread depth right: 6 mm Weights Unladen weight: 2,660 kg Payload: 840 kg GVW: 3,500 kg Functional Loading area height: 50 cm Interior Upholstery: Leather Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial information Leasing price: 522 € per month (delivery van, 72 months); Ask for more information and conditions

Condition: ready for operation (used), Year of construction: 2002, A Fehlmann CNC machining center that was used in the ceramics industry is available. Travel X/Y/Z: 700mm/420mm/610mm, speed: 20000rpm, tool holder: SK30, tool positions: 48, spindle power: 9kW, torque: 70Nm, table dimensions X/Y: 1260mm/490mm, weight: approx. 5200kg, control: Heidenhain TNC 430M. The C key has a fault on the ATS swivel apparatus regarding the amplitude. The ball screws of the X and Y axes were recently replaced. Without extraction system. Documentation available. An on-site inspection is possible. Lrjdpfjy H I Euex Ahker

Year of construction: 2000, condition: ready for operation (used), Two injection moulding machines are available. 1) Ferromatik K 110 1100-493, year of manufacture: 2000, clamping force: 1100kN, min. mould installation height: 300mm, max. opening stroke: 550mm, screw diameter: 40mm, injection volume: 201cm³. The control no longer starts up properly, probably due to the circuit board. Includes a 3-axis handling robot Remak. Without conveyor belt. 2) Arburg 270 M 500-90, year of manufacture: 1995, clamping force: 500kN, min. mould installation height: 225mm, max. opening stroke: 325mm, screw diameter: 30mm, injection volume: 70cm³. The cylinder is slightly leaking. Documentation available. An on-site inspection is possible. Lrjdpfx Ahsw Ni Ibsker

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : ISO30 - Spindle speeds : 18000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 705 / 425 / 610 [mm] A ROTARY AXIS - Travel : 360 [°] (+/-) - Indexing precision : 0.001 [°] B ROTARY AXIS - Travel : +180/-5 [°] (+/-) - Indexing precision : 0.001 [°] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 32 TABLE - Table dimensions : 1260 x 490 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 22 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2600 x 2300 [mm] - Machine height : 3000 [mm] - Machine weight : 5100 [kg] EQUIPMENT - CNC : iTNC 530 - Electronic handwheel - Type of divisor : 4e-5e axe intégré * manufacturer : Fehlmann * model : ATS 160 CNC Lrjdpsuhb A Eefx Ahkor * clamping diameter : 300 [mm] * center height : 160 [mm] * tightening type : Pneumatique - Coolant tank * with high-pressure pump - Oil mist extractor - Spindle cooling unit - Workpiece probe : Renishaw OMP 40-2 - Electric transformer

Condition: excellent (used), Manufacturer: ARBURG Model: Allrounder 270-M-500-90 Year of manufacture: 1995 Serial number: 164822 Control system: Control unit: Arburg Multronica Injection unit: Injection type: vertical injection unit Screw diameter: Ø 20 mm Lrodpfx Asx Eitbohkjr Clamping unit: Clamping force: 500 kN Additional equipment: Pick system: part removal system Divider chute: separating chute / selective chute Enclosure: full protective enclosure

Condition: ready for operation (used), Year of construction: 2003, operating hours: 56,146 h, travel distance X-axis: 700 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 610 mm, controller manufacturer: HEIDENHAIN, overall weight: 5,100 kg, spindle speed (max.): 18,000 rpm, number of axes: 5, This 5-axis FEHLMANN Picomax 90-M was manufactured in 2003. It features a maximum spindle speed of 18,000 rpm and a table size of 920 x 380 mm. The machine offers impressive X-axis travel of 700 mm, Y-axis travel of 420 mm, and Z-axis travel of 610 mm, accommodating a maximum workpiece weight of 250 kg. If you are looking to get high-quality machining capabilities, consider the FEHLMANN Picomax 90-M vertical machining centre we have for sale. Contact us for further details. • Table size: 920 × 380 mm • Distance between table and spindle: min 94 mm / max 704 mm • Max. workpiece weight on table: 250 kg Lrjdpfszlhu Rox Ahker Additional equipment • Dividing head, 4th and 5th axis: FEHLMANN ATS 160

Condition: excellent (used), Year of construction: 2004, Boy 90 M Ljdjzc I U Tepfx Ahkerr Year of manufacture: 2004 Injection unit: Screw diameter: 42 mm Injection weight: 193 g Injection pressure: 1724 bar Metering volume: 214.7 ccm Clamping unit : clamping force: 90 t tie bar distance: 430x360 mm size of clamping platens: 635x610 mm ejector: hydraulic clamping unit: hydraulic Control: Procan - touch screen Additional equipment: Euromap 12 Robot interface Air valve x 1 Dimensions: Weight: 3100 kg Length/width/height: 4.37x1.21x2.20 m Drive: Pumps/motor: 15 kW Heating power: 11,3 kW Total power: 26,3 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: as good as new (ex-display), Year of construction: 2024, New hydraulic heating plate press Manufacturer: ITALPRESSE, Type XL/6 30-13 with gold-anodized plates Touch display control - Electric heating plates, 3,000 x 1,300 mm - Total pressure: 90 tons - Number of heating plates: 2 pcs. - Number of tiers: 1 pc. - Cylinder stroke: 350 mm - Tier opening: 350 mm - All-side loading - Number of pressure cylinders: 6 pcs. - Diameter of pressure cylinders: 85 mm - Power requirement of hydraulic unit: 3 kW - Electric heating plates made of solid, hard aluminum with built-in heating wires - Heating power: 22 kW - High-pressure insulation plates - Working temperature: 90° C - Max. temperature: 120° C - Operating voltage: 400 V/50 Hz - Safety regulations according to CE standard Standard equipment: - Movement of the press table with rack and pinion and parallel guides at 2 corners of the press table, made of self-lubricating material - Electronic control unit with touch screen for controlling and monitoring the machine - Digital timer for setting the pressing time and automatic opening - Digital input and monitoring of the pressing pressure - Digital timer for setting the pressing time - Digital diagnostics and display of error messages Lsdpjdx R Tfofx Ahkorr - Safety circuit with two-hand operation - Safety pull cord - Safety bracket for the lower press table Integrated accessories: - Touch screen TS/400 - EFC Electronic flatness control - Gold-anodized heating plates (bus bars) Location: In stock at 54634 Bitburg - Immediately available -

Condition: excellent (used), Weiss Model: WK3 600/0-M Weiss Climate Test Chamber, Water-Cooled Series: WK3-../0 with SIMPAC* Controller Test chamber volume: approx. 600 liters Test chamber dimensions: Height 950 mm, Width 800 mm, Depth 800 mm External dimensions: Height 1995 mm, Width 1090 mm, Depth 1660 mm Operating data: Test chamber lighting: LED 24 V, 6.8 W / Halogen bulb 2 x 24V, 50W Rated voltage: 1/N / PE AC 230 V ±10% 50 Hz Rated power: 2.3 kW Rated current: 10 A Site-provided fuse: 16 A slow-blow Control cabinet and operator panel protection class: IP 54 Maximum heat emission to environment: 1200 W Sound pressure level: Measured at a distance of 1m from the front, at a height of 1.6m: 46 dB(A) Data for temperature tests: Temperature range: -5°C to +90°C Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1 K Temperature gradient (according to IEC 60068-3-5) Temperature change rate: Heating 0.6 K/min Cooling 0.3 K/min Heat compensation at +20°C to +50°C: 200 W Data for climatic tests: Ljdpfx Aheziywrokorr Temperature range: +10°C to +90°C Dew point range: 4 to +89.5°C Humidity range: 10 to 98 % r.h. Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.3 K Spatial temperature deviation: ± 0.5 to ± 1 K Temporal humidity deviation: +1 to +3 % r.h. Refrigerant: R-404A Weight: 610 kg For your safety as a buyer, please note the following information! The following points are carried out in advance on our offered chambers: 1. Functionality check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used Scope of delivery: (See image) (Technical data and information subject to change and errors!) We are happy to answer any further questions you may have by phone.

Condition: good (used), Suspension clamp, helmet rail holder, helmet rail, running rail, rail holder, clamping sleeve, sliding gate sleeve -Manufacturer: Helmet, running rail helmet rail with ceiling holder Lrodpfx Aswmq Hhehker -Type: Width 90 mm -Lengths: 1x 3010/2805/515 mm each -Dimensions: see photos -Shipping/Price: complete -Transport dimensions: 3010/650/H150mm -Weight: 136 kg

Condition: used, Year of construction: 1994, We offer this used KETTNER RBS 90-80 M pallet destacker, manufactured in 1994. Two machines are available. Adjustable for different pallet sizes; the first destacker is set by default for 100x120 pallets, and the second for 80x120 pallets. Manufacturer: KETTNER Model: RBS 90-80 M Order number: 944707/02 Year of manufacture: 1994 Lsdpfx Ahszgv Egskjrr If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Q 33.0 m³/h P 15,0 kW max. 20 bar Lrjdeikwapopfx Ahkor max. 110 C° H 90.0 m Nr. 4932869340 232 kg

Condition: used, Year of construction: 2012, max. working width: 1000 mm workable material thickness: 0,5 - 50 mm Total power: 82 A Total current consumption: 44,5 kW Lrodpfx Ahjy Sp Hdjkor Insulation class: IP 42 Infinitely variable feed speed: 0-4 m / min Adjustment of material thickness: elektrisch Adjustment of tools: elektrisch Length: 3100 mm Width: 2100 mm Height: 2000 mm Machine weight: 3800 kg Standard configuration SBM-M D 1000:Two-side slag removal of plasma and thermal cut sheets up to 120 mmSaving of tool costs incurred by mechanical deslagging –no time-consuming and expensive grindingTwo-side slag removal saves the time intensive turning of the often very heavy workpieces or machining of parts twiceUp to 60 % work time savings compared to one-side processing machinesModular and compact in modern machine design - smaller footprintDry operationThe cross-machining principle guarantees uniform tool utilisation over the entire working er and lower assemblies separated can be adjusted or turned on and off electricallyInnovative tooling and material feed system allows for optimum handling of burrs and uneven surface of piecesMaximum productivity while maintaining machining qualityImproved work environment - Reduction of dust, dirt and noiseOptionally available: Conveyor Systems; Material Handling; Robotics & Automation; Processing Tools SBM-XL 1000:Deburring and edge rounding of parts up to 120 mm material thicknessProcessing both sides of the parts simultaneously eliminates the need of turning heavy parts and processing them for a second timeSimultaneous deburring and edge rounding on interior and exterior contoursDry operationSimple, intuitive operationThe processing units can be individually adjusted or turned on and off imum productivity while maintaining machining qualityThe cross-machining principle guarantees optimum tool utilisation over the entire working ter and simpler tool change within just a few minutesModular and compact in modern machine design - smaller footprintImproved work environment - Reduction of dust, dirt and noiseOptionally available: Conveyor Technology; Handling Systems, Automation; Custom SolutionsFor repeated customer requirements, processing parameters can be called up quickly and easily through predefined to 60 % work time savings compared to one-side processing grinding machines Extended machine accessories - 2 x dust extractor - 2 x conveyor belt

Condition: ready for operation (used), Year of construction: 2007, machine/vehicle number: 15507225, functionality: fully functional, operating hours: 9,980 h, travel distance X-axis: 700 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 610 mm, number of slots in tool magazine: 32, rotational speed (max.): 20,000 rpm, rotational speed (min.): 50 rpm, TECHNICAL DETAILS Travel X-axis: 700 mm Travel Y-axis: 420 mm Travel Z-axis: 610 mm Feed rates: 1 - 20 m/min Machine pallet Pallet dimensions: 1,260 x 490 mm T-slots: 9 x 12H8, 50 mm spacing Max. spindle speed: 50 - 20,000 rpm Tool system Tool holder: SK30 Number of tools in magazine: 32 MACHINE DETAILS Control: HEIDENHAIN iTNC 530M Dimensions & Weight Dimensions / Weight: 2,500 x 2,560 x 2,700 mm Installation dimensions: 4,300 x 2,950 x 3,012 mm Ledpfxeyznvcs Ahksrr Weight: 5,100 kg Connected load: 22 kVA Operating hours Spindle hours: approx. 9,980 h Control on-time: 78,165 h Machine on-time: 91,869 h Program run time: 54,682 h EQUIPMENT 3D touch probe, infrared Coolant system 3 bar / 30 l/min Oil mist extraction system Minimum quantity lubrication system with dual dispenser FEHLMANN HSC settings (Cycle 327) Note: The clamping devices and tools shown in the images are not included in the scope of delivery.

Year of construction: 2024, condition: new, ♻ Universal use (diverse wood, pallets with nails and pins, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) ✔ Power: 22 kW ✔ Shaft length: 870 mm ✔ Shaft diameter: 270 mm ✔ Shaft RPM: 80-120 rpm ✔ Number of cutting knives: 38 ✔ Granulation: 10-50 mm ✔ Capacity: up to 8 m3/h* ✔ Filling opening: 2031 x 1565 mm ✔ Dimensions L/W/H: 3,21/1,97/2,04 m ✔ Weight: 2450 kg Lrodpfxjiq Uz Hs Ahkor 2 years warranty or 2000 working hours

Condition: as good as new (ex-display), Year of construction: 2026, sheet width 1050 mm plate thickness 3.3 mm pre-bending 3.0 mm roll length 1050 mm roll diameter 90.0 mm min. dia. 130 mm engine output 1.10 kW weight 570 kg range L-W-H 1.800 x 800 x 1.130 mm Exhibition machine from 2026 With only approximately 2 operating hours Condition like new Special price upon request Furnishing: - Robust electro-mechanical bending machine - 2x central rollers driven by an electric motor (top and bottom roller) - Top roller can be swiveled out manually, with folding bearing - including conical bending device - freely movable control panel - Lower roller manually adjustable, by hand wheel Ledpfx Ahew U U Udekerr - asymmetrical roller arrangement - self-braking main motor - Safety device (safety line with switch unit) - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized side roller adjustment - Digital position display for motor-driven adjustable side roller

Condition: excellent (used), Planing cutter head (28149) Lrjdjg Er H Hopfx Ahkor Manufacturer: ISCAR Type: F 90 A - D160-40 M Weight: 5 kg

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: 467334, Manufacture year 2010 Machine specifications: Lrjdpsypvdijfx Ahkor - Push infeed, max. length 6300 mm - Automatic length measuring and chalk reader - Cutting width 40 – 420 mm - Cutting height 15 – 170 mm - Min. cross section 20 x 10 mm - Max. cross section 270 x 170 / 410 x 30 mm - Motor 13.5 kW - Total electrical load approx. 22 kW -Operating pressure approx. 8 bar - Saw blade diameter 630 mm / bore 30 mm Consisting of: 1. Cross chain infeed system 8 pc. chain transport with 3 latch rows 2. Push infeed system with liftable pusher Infeed length 6300 mm, length detecting and chalk reader 3. OptiCom Direct controller 4. Opticut cross cut saw unit S90 XL With side pusher and waste gate 5. Outfeed transport belt

Year of construction: 1979, condition: good (used), 1 x 90 m³ aluminum silo with extended base and filter housing, ø 3,000 mm designed for a specific weight of 0.6 kg/dm³ (formerly used as a flour and starch silo) Manufacturer: Zeppelin Capacity: approx. 90,000 liters Diameter: approx. 3,000 mm Overall height: approx. 15,950 mm + 1,200 mm railing Weight: approx. 4,000 kg Specific weight: 0.6 kg/dm³ Material: Aluminum: AlMg3 Food grade: yes Insulation: approx. 100 mm mineral wool with screwed-on cover plate (cover plate partially damaged, but can be repaired by us). Connections and fittings: On the top: 1 x roof edge railing (ø 1,800 x 1,200 mm) with two access openings 1 x hinged dome with protective grid DN 600 1 x access ladder to the filter housing 2 x crane eyes In the filter housing: 1 x flange DN 100 for filling line 4 x ventilation opening DN 600 with filter bag 3 x connection for control/measuring technology Ljdpsgig D Dsfx Ahkerr In the shell: 1 x ventilation grid (filter housing) 1 x filling line 1 x access door (approx. 1,850 x 800 mm) The silo ends in a 60° cone NW 1500 with a manhole. The cone is equipped with a fluidized bed (compressed air) and a rotary valve. The silo does not have rupture discs or explosion protection devices. For further information: see technical drawing and images.