Used Red Rock Automation Ltd Welding Set for sale (30,433)

Condition: new, 250kg Welding Positioner Bjdpstzan Nsfx Amyjdf Turning Capacity: 250kg at 300mm Tilting Capacity: 250kg at 300mm Rotation Speed / Power: 0-4rpm at 0-90v / DC200w Tilt Range / Power: 0-135° in 30sec/ DC500W Rotation Drive Control: DC Motor Card Table Size: Ø500 x 20t c/w 4 slots Earthing: 300A

Condition: new, 3t Conventional Welding Rotator Set Item: Drive / Idler Rotator Set Load Capacity Each: 1.5MT Total Rotation Capacity: 4.5MT Vessel Size Min: Φ286mm at 60° included angle Vessel Size Max: Φ1000mm at 60° included angle Bedpfotqn Ufjx Amyjdf Tyre Type & Size: Vulcanised PU, Φ245mm x75mm Roller Speed: 400-4000mm/min

Condition: excellent (used), REF: MM6174 1 x Machinery Automation Ltd Capping line Technical specification: ✅ Manufacturer - Machinery Automation Ltd ✅ Model - MA-CET70 Capping Line. ✅ Cap Types - Screw Cap, Jar, Foamer, Dropper, pre-formed ROPP. Bdjdpow E Ey Tjfx Amyef ✅ Cap Diameters - 18 – 70mm (extended to 90mm). ✅ Bottle Height - 30 – 300mm Notes: This has been built for glass jars, which include a 43mm cap, a 53mm cap, 73mm cap and 70mm cap. There are 4 x change parts with the elevator to suit these and the capper gets adjusted to suit without any change parts.

Condition: like new (used), Year of construction: 2022, operating hours: 120 h, functionality: fully functional, The Red Rhino 7000 is a mobile (mini) jaw crusher – essentially a self-contained, movable crusher that uses one fixed and one movable jaw to crush material. - Crushing principle: Jaw crusher – large, wear-resistant jaws made of manganese steel. - Inlet size: approx. 700 mm × 400 mm – this is the maximum material size the crusher can handle at one time. - Capacity: up to approx. 45 tons/hour (depending on material quality). - Drive: Diesel engine (e.g., Deutz, approx. 66–70 hp, but the exact engine size depends on the specific model). Bedsy It Tgepfx Amyedf - Output size: adjustable between coarse and fine (e.g., 10–120 mm), resulting in variable particle size of the crushed material. - Mobility: Tracked or rubber-tired chassis → easy to move across terrain. - Control: often via radio remote control. What is it used for? - Crushing construction waste - On-site crushing of concrete, reinforced concrete, bricks, and stones for reuse or easier handling. - Recycling

Condition: new, Year of construction: 2024, Miller XMT 450CC/CV 400 Volt 63 AH Wind Tunnel Technology™ Protects electronic components from dirt, metal dust, and humidity. Adaptive Hot Start™ Ensures perfect ignition properties and prevents the electrode from sticking. Safety shutdown and error indicator For example, in case of malfunction in the primary power circuit, secondary power circuit, or overheating. Special selection option for VS wire feeders on the process selector switch For all wire feeders that operate with welding voltage, a favorable constant current characteristic (CV) and welding current output are automatically activated. Aluminum housing Lightweight, no corrosion in case of damage. Special arc control technology and Arcforce regulation Excellent control of the weld pool, even in the most demanding applications, especially for electrode types E 6010 and E 7010. Bdsdjzq Agfepfx Amyef Large LED display A/V Easy to read, option to preset welding parameters, hold function after the arc has extinguished. Arc cutting and beveling Due to high power and robust construction, very well suited for cutting and beveling operations. Parallel connection Two XMT 450 units provide 1200 A peak current. 14-pin remote control connection Remote control of welding current and welding current output. Applications Industrial applications Structural steel construction Shipbuilding Vehicle construction Rail construction Steel construction Pipeline construction Processes MIG/MAG welding SMAW (shielded metal arc welding) GTAW (gas tungsten arc welding) Flux-cored arc welding Beveling

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 2017-2034, type of input current: AC, input voltage: 230 V, type of cooling: air, electrical fuse: 16 A, open-circuit voltage: 95 V, welding current at 100% duty cycle: 120 A, protection type (IP code): IP21, welding current (min.): 2 A, welding current (max.): 165 A, input frequency: 50 Hz, Equipment: documentation/manual, type plate available, Orbitalum Orbimat 165 CA orbital welding package for tube welding. The package includes: Bjdpfxezq A Eno Amyjdf - Orbitalum ORBIMAT 165 CA orbital welding power source / control unit - 2 x Orbitalum ORBIWELD 76S closed orbital welding heads - Orbitalum GFX 3.0 pipe cutting / beveling machine with GF10 drive unit - Hoses, cables, collets / inserts, and accessories as shown in the photos Component details: - ORBIMAT 165 CA: year 2017, serial number 2017-2034 - ORBIWELD 76S #1: year 2020, serial number 3764 - ORBIWELD 76S #2: year 2016, serial number 2489 - GFX 3.0 with GF10 drive unit: year 2016 The equipment is used and sold as-is. A power-on inspection is possible. The ORBIMAT power source starts up, and ORBIWELD head rotation / test movement is demonstrated in the video. A full welding test is not currently available. Condition and completeness are as shown in the photos. Loading: We have forklift / pallet handling capabilities on site and can load the equipment onto the buyer’s truck. Removal: Available immediately. The removal timeline can be agreed upon with the buyer. Transportation is at the buyer’s expense.

Condition: excellent (used), Year of construction: 2012, operating hours: 90 h, functionality: fully functional, type of input current: three-phase, total height: 1,100 mm, total width: 500 mm, total length: 1,200 mm, Offer little used welding set Orbital welding of pipes on site (with or without oscillation, depending on pipe thickness) with assembly! Pipe diameter from 25–115 mm Pipe thickness from 1–8 mm Inside includes a pipe cutter, welding arm, remote control, equipment with cooling system everything you see in the pictures. Length x width x height 1200 × 500 × 1100 Bdedpfxjv Di S Es Amyef

Condition: ready for operation (used), DMU 70 Year XYZ 710x520x520 6000 kg Bdsdpfjyyqwtjx Amyjf Size 3300x4500x5500 Table 500mm Motor 25kW Spindle 12000 RPM Feed XYZ 10m/min Rapid XYZ 30m/min

Condition: ready for operation (used), DMU 50V XYZ 500x380x380 Motor 15 kW 15000 RPM Table 800x480 24 tools Size 2450x18000x2384 Weight 4000 kg Spindle new 2026 Bsdpsyyqu Ssfx Amysdf ask for film

Condition: new, Year of construction: 2026, PROFESSIONAL WIRE FEEDER WITH AC SERVO MOTOR FOR LASER AND TIG WELDING Citronix professional wire feeder with servo technology - means that it uses ac servo motor for motor drive, which enables it not only to feed wire very precisely even when the speed is low, but also the ability to set the length in „mm“ for wire withdrawal, and also, after the material is cooled down, we can push it again (the smallest step 0,1 mm) This is a very important feat with laser welding, and this working method is an advantage compared to wire feeders made in the Far East, since with those machines the function of withdrawal and pushing the wire is set on time, and the consequence of this method is that the tip of the welding wire never comes back to the place where the withdrawal started. We made the Citronix wire feeder in a way that it can control not only the wire feeding process, but it can also manage (turn on and off) both the laser source and the gas magnetic valve. This is another significant difference and advantage compared to other manufacturers, because usually there is no spot welding technology in laser welding machines, so if someone wants to weld sheets in the spot welding technology, he can set the spot time and the wire feeder will control the laser source. Wire feeder has 4 operation technologies: 1. continuous welding with wire feeding; 2. continuous welding without wire feeding; 3. spot welding without wire feeding; Wire feeder has 200 memory cells – locations, if the parameters are set, they can be saved on the memory location and we can name them in any number or text combination, in order to make use easier. We also developed a foot pedal, which can be attached to the wire feeder and regulate the feeding speed. It works like a gas pedal in motor vehicles. If, for example, we set the maximal speed 10 meter per minute on the display, and press the pedal all the way, the speed will be 10 meter per minute (or the speed we set), if pressed only half way, the speed will be half of the set speed. This feat can be used if the operator remains in one place, for example if he is sitting. If this pedal isn't necessary, the wire feeder can be attached to the system in a manner to turn on-off the welding process from the button on the torch. This pedal is optional, and in case you want to order it, it is additionally charged 400 EUR. Take a look at the monitor images and see the functions – parameters that can be adjusted. Citronix wire feeder can be used not only for laser welding, but also for the TIG welding, we made a filter to prevent HF-spark. Wire thickness it can push is from 0,8-2,4 mm. At this moment, we have a menu in English, German, Hungarian, and Serbian language. Bdodpfx Amemk S Sljyjf In our offer we have a lot of welding machines we developed ourselves and they are all digitally and software based MIG MAG, MIG PULS SYNERGIC welding machines, also for robot welding with touch screen monitor, TIG ac dc with touch screen monitor, digital plasma cutting machines, electronics for controling the high pressure water jet pump, sand dispenser for water jet cutting, voltage THC with touch screen monitor... We are also very involved in innovation and development, please take a look at our other products, if you are a manufacturer, and are interested in discussing further, we are also selling know-how.

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 2795, power of the servo motor: 750 W, input voltage: 230 V, pneumatic connection: 7 bar, For sale is a high-performance Brother automated sewing unit equipped with a JAM TC 762 F automation module, offered as a complete industrial workstation. This system is specifically designed for automated pocket setting and precision sewing operations, making it highly suitable for denim, trousers, and workwear production. The integrated automation module enables accurate material positioning, clamping, and repeatable stitching cycles with minimal operator input. The unit combines a heavy-duty Brother sewing head with JAM International automation technology, delivering consistent production quality and significantly improved efficiency compared to manual processes. The machine has been used in a professional garment factory environment and was fully operational until factory shutdown. The unit has also been video recorded in full working condition on 01.04.2026. Key advantages: • Automated pocket setting and J-stitching Bedpfjy Inyhex Amyedf • High repeatability and production consistency • Reduced labor dependency • Suitable for continuous industrial production • Complete workstation ready for integration • Production Capacity: Approximately 2,600 pockets per 8-hour shift. • Maximum Speed: Operates at up to 3,600 RPM. • Quick-Change System: Features a pneumatic mold change system, allowing for fast transitions between different pocket sizes and styles. • Versatile Operation: Capable of both semi-automatic and fully automatic modes, handling both pre-ironed and unironed pockets. Includes: • Brother automated sewing machine head • JAM TC 762 F automation module (material handling and positioning) • Electronic control system (TC 762 interface) • External PC workstation (monitor, keyboard, control unit) • Pneumatic system with regulators • Dual foot pedal controls • Industrial table and heavy-duty frame • Safety guards and integrated lighting • Fabric support and output handling system Technical details: • Manufacturer: Brother Industries, Ltd. (Japan) • Automation module: JAM International TC 762 F (Italy) • Type: Programmable automated sewing workstation • Power: 220V • Pneumatic system required • Integrated control and external PC operation Condition: • Used industrial condition • Fully operational prior to factory shutdown • Video recorded in operation (05.03.2026) • Maintained and serviced, latest maintenance 27.02.2026 • Typical signs of use consistent with production environment • Sold as-is, where-is, without warranty Typical applications: • Automated pocket setting • Denim and trouser production • Workwear manufacturing • Reinforcement stitching • Repetitive precision sewing operations Location: Valga, Estonia Removal & transport: Buyer responsible for dismantling and transport

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 10 h, functionality: fully functional, type of input current: AC, laser power: 1,070 W, input frequency: 50 Hz, continuous power: 1.2 kW (1.63 HP), Equipment: documentation/manual, Fiber laser welding machine with 1200 watts laser power 4-in-1 device: - Welding with automatic wire feed - Welding without wire - Cleaning Bdsdpezkrblofx Amyof - Cutting - Top-quality device at a great price from our showroom - Approximately 10 operating hours - 1.2 kW laser source - Universal device for welding, cutting, and cleaning - Incl. 4-roller wire feed system - Integrated air cooling - Available immediately Machine dimensions (approx.): Width: 33 cm Height: 61 cm Depth: 55 cm Weight: approx. 37 kg

Condition: as good as new (ex-display), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 01164/18, Dane techniczne: Zakres przypawania: M3-MR16mm/ fi 3-14mm Materiał: stal konstrukcyjna, stal kwasoodporna A2 i A5, stal żaroodporna Prąd przypawania: 300-1,000 A Czas przypawania: 3-1,000 ms Cykl pracy: do 50 trzpieni/min, zależnie od średnicy trzpieni Zasilanie: 3x400 V, 50/60Hz, 32AT Bdjdozmg T Uspfx Amyjf

Condition: like new (used), Year of construction: 2020, operating hours: 12 h, functionality: fully functional, laser power: 1,000 W, laser hours: 12 h, sheet thickness (max.): 2 mm, degree of automation: semi-automatic, laser type: CO₂ laser, Equipment: cooling unit, documentation/manual, Almost new Fanuci welding machine, 1000 W. Everything is in good working order. Used for approximately 20 hours. Includes a wire feeding mechanism. The production processes changed, and the machine is no longer needed. Bdsdoy T I Dkepfx Amyef

Condition: ready for operation (used), Year of construction: 2007, machine/vehicle number: W000257776, type of input current: three-phase, type of cooling: water, welding current (min.): 20 A, welding current (max.): 400 A, Oerlikon Citopuls MXW 420 MIG/MAG welding machine with water cooling – 400 A For sale is a used Oerlikon Citopuls MXW 420 MIG/MAG welding machine from the production stock of Syntegon Technology GmbH. The machine was used in its own production and is being sold due to a production and inventory consolidation, as it is no longer needed. The machine is functional and has been regularly inspected. The annual safety inspection certificate is available. This powerful industrial machine is particularly suitable for demanding MIG/MAG welding applications in the fields of mechanical engineering, metal construction, maintenance, and manufacturing. The water cooling ensures reliable operation even at higher welding currents. Technical data: Manufacturer: Oerlikon Model: Citopuls MXW 420 Year of manufacture: 2007 Serial number: W000257776 Welding current range: 20 – 400 A Power connection: 400 V Welding process: MIG/MAG [Machines_...likon 2134 | Excel] Water cooling with existing water cooler Welding torch included Bjdpfozlrwcex Amysdf Condition: Functional Safety inspected Used, from ongoing production The machine is ideal for workshops, metalworking shops, metal construction companies, as well as training and repair companies looking for a reliable industrial welding machine. Inspection possible by prior appointment. Loading upon agreement. Important conditions: Please note that the sale of this machine is only possible under the following conditions: • Sale exclusively to end users/manufacturing companies (no resale to dealers) – corresponding company profile required • Sale only within Germany Sales/transfer conditions: • Disassembly, removal, and transport are the responsibility of the buyer and at their own risk. • The buyer is responsible for providing personnel, tools, and transport equipment. Personnel may only work with appropriate personal protective equipment, and only trained personnel may be used.

Condition: ready for operation (used), Year of construction: 2004, machine/vehicle number: 89518, type of input current: three-phase, welding current (min.): 5 A, welding current (max.): 350 A, EWM Tetrix 350 AC/DC HF water-cooled TIG welding machine – 350 A For sale is a high-quality EWM Tetrix 350 AC/DC HF TIG welding machine from the inventory of Syntegon Technology GmbH. The machine was used in an industrial environment and is being sold as part of an inventory reduction, as it is no longer needed for production. The machine is fully functional and has been regularly maintained and inspected. The annual safety inspection certificate is available. This welding machine is suitable for both demanding TIG welding applications and electrode welding. The AC/DC technology allows for the processing of steel, stainless steel, and aluminum materials. Technical data: Manufacturer: EWM Model: Tetrix 350 AC/DC HF Year of manufacture: 2004 Welding current range: 5 – 350 A Power supply: 400 / 415 V Welding processes: TIG and electrode Water cooling with water cooler Torch included Condition: Functional Safety inspected Used, from ongoing production The machine is ideal for workshops, metalworking shops, metal construction companies, as well as training and repair facilities that are looking for a reliable industrial welding machine. Inspection is possible by prior appointment. Loading can be arranged. Important conditions: Please note that the sale of this machine is only possible under the following conditions: • Sale exclusively to end-users/manufacturing companies (no resale to dealers) – corresponding company profile required • Sale only within Germany Bsdpezlrnnofx Amyjdf Sales/transfer conditions: • Dismantling, removal, and transport are the responsibility of the buyer and at the buyer's risk. • The buyer is responsible for providing personnel, tools, and transport equipment. The personnel must only work with appropriate personal protective equipment, and only trained personnel may be used.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 19200, type of input current: three-phase, type of cooling: water, welding current (min.): 5 A, welding current (max.): 300 A, Equipment: type plate available, EWM TIG 300 DC HF TIG welding system with water cooling – functional For sale is a high-quality welding system from Syntegon’s production stock. The system is being sold due to a change in production processes or because it is no longer needed and comes from industrial use. The unit is functional and has been regularly inspected. The annual safety inspection report (UVV) is available. Technical data Manufacturer: EWM Model / Type: TIG 300 DC HF Year of manufacture: 1999 Serial number: 98350019004 Inventory number: 679 361 System number: 7000 1520 Welding process: TIG (GTAW) and SMAW (shielded metal arc welding) Welding current: 5 – 300 A Mains connection: 400 V Equipment TIG torch included Water cooling Integrated water cooler included Condition Functional Bsdpfx Aezlrkismysdf Annual safety inspection report (UVV) available Used, from ongoing industrial operation Important conditions: Giscl Iozhnbpsdcwwjw Please note that the sale of this machine is only possible under the following conditions: • Sale exclusively to end users / manufacturing companies (no resale to dealers) – corresponding company profile required • Sale only within Germany Sales / Transfer conditions: • Dismantling, removal and transport are the responsibility of the buyer and at his own risk. • The buyer provides personnel, tools and transport equipment. Personnel may only work with appropriate personal protective equipment, and only trained personnel may be used. If you are interested, we look forward to hearing from you so that we can discuss the further details directly.

Condition: ready for operation (used), Year of construction: 1997, machine/vehicle number: 97136003344, type of input current: three-phase, input voltage: 400 V, type of cooling: water, welding current (min.): 5 A, welding current (max.): 250 A, EWM TIG 250 DC HF water-cooled TIG welding machine – 250 A For sale is a used EWM TIG 250 DC HF TIG welding machine from the production stock of Syntegon Technology GmbH. The unit is being sold due to production adjustments and stock reduction, as it is no longer needed. The machine is functional and in used condition, appropriate for its age. The annual safety inspection has been carried out regularly. Technical data: Manufacturer: EWM Type: TIG 250 DC HF Year of manufacture: 1997 Welding current: 5 – 250 A Mains connection: 400 V Welding process: TIG (GTAW) and electrode (SMAW) Water cooling with existing water cooler Welding torch included Condition: Functional Safety inspection available This machine is ideal for workshops, metalworking shops, metal construction companies, as well as training and repair companies looking for a reliable industrial welding machine. Inspection is possible by prior appointment. Loading can be arranged. Important conditions: Please note that the sale of this machine is only possible under the following conditions: • Sale exclusively to end users/manufacturing companies (no resale to dealers) – corresponding company profile required • Sale only within Germany Sales/transfer conditions: • Disassembly, removal and transport are the responsibility of the buyer and at his own risk. • The buyer is responsible for providing personnel, tools and transport equipment. Personnel may only work with appropriate personal protective equipment, and only trained personnel may be used. If you are interested, we look forward to hearing from you so that we can discuss the further details directly. Bdedpfxozlrhho Amysf

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 98350019004, type of input current: three-phase, type of cooling: water, welding current (min.): 5 A, welding current (max.): 300 A, Equipment: type plate available, EWM TIG 300 DC HF TIG welding system with water cooling – functional For sale is a high-quality welding system from Syntegon’s production stock. Bdsdpfozlrdcsx Amyjf The system is being sold due to a change in production processes or because it is no longer needed and comes from industrial use. The unit is functional and has been regularly inspected. The annual safety inspection report (UVV) is available. Technical data Manufacturer: EWM Model / Type: TIG 300 DC HF Year of manufacture: 1999 Serial number: 98350019004 Inventory number: 679 361 System number: 7000 1520 Welding process: TIG (GTAW) and SMAW (shielded metal arc welding) Welding current: 5 – 300 A Mains connection: 400 V Equipment TIG torch included Water cooling Integrated water cooler included Condition Functional Annual safety inspection report (UVV) available Used, from ongoing industrial operation Important conditions: Giscl Iozhnbpsdcwwjw Please note that the sale of this machine is only possible under the following conditions: • Sale exclusively to end users / manufacturing companies (no resale to dealers) – corresponding company profile required • Sale only within Germany Sales / Transfer conditions: • Dismantling, removal and transport are the responsibility of the buyer and at his own risk. • The buyer provides personnel, tools and transport equipment. Personnel may only work with appropriate personal protective equipment, and only trained personnel may be used. If you are interested, we look forward to hearing from you so that we can discuss the further details directly.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, type of input current: AC, total height: 680 mm, total width: 340 mm, total length: 680 mm, input voltage: 230 V, overall weight: 38 kg, type of cooling: air, electrical fuse: 16 A, laser power: 800 W, shaft length: 1,080 mm, continuous power: 800 kW (1,087.70 HP), Equipment: documentation/manual, head guard, Operation - Simplest operation via synergy characteristic curves - Achieve a finished weld in just three steps. Automatic adjustment of power, wire feed, oscillation width, oscillation frequency, laser frequency, PWM, hotstart, etc. - High-resolution display ensures optimal readability of all necessary parameters. An integrated help function provides better understanding of setting options - Fully integrated operation in the wire feeder case – operation via the machine or wire feeder selectable Technical Features - 20µm single-mode laser source - High-performance laser cells paired with gas-cooled torches provide maximum power and focus stability - 2-in-1 machine: welding and cleaning: laser cleaning is ideal for paint removal, rust removal, and scale removal - Optional: dual wire feed Safety - Dual-channel emergency stop system - Dual-channel safety interface for access control (door contact switch) - Key switch to prevent unauthorized use - Dual-channel fiber break detection and monitored QBH connection Bdodpfjyuvqmjx Amysf - Safety notices and manual activation of the laser release at every start - Dual-action pushbuttons prevent unintentional laser activation - Suitable for heavy-duty applications Advantages of Laser Welding Compared to Conventional Welding Processes - Hardly any distortion, incredibly fast, and outstanding quality (even on extremely thin materials < 1 mm) - Uses approximately 70% less energy - Fast and easy to learn - High process reliability - Extreme time savings with significantly reduced rework - One of the lightest torches on the market at approx. 680 g - Dual-channel safety loop for maximum safety Advantages of Craft-Laser - Laser cleaning with up to 100 mm scanning width and autofocus - 2-in-1 machine: welding and cleaning - Full synergy – no more parameter lists - Service-friendly – no more tedious shipping

Condition: new, Year of construction: 2025, HW 1.5kW is a high-performance, compact fiber laser welding machine designed for maximum efficiency and precision. Technical Specifications: Bdsdezkkayepfx Amysf Laser Source Power: 1.5 kW (MAX Laser Source) Welding Speed: 0 - 120 mm/s Welding Spot Adjustment: 0 – 5 mm (Spiral Wobble function) Wire Feeding: Automatic system included Fiber Cable Length: 15 meters Power Supply: 220V / 380V Dimensions: 1,000 x 630 x 910 mm Weight: 230 kg Certification: CE Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 17 h, functionality: fully functional, machine/vehicle number: 4153-3431-0023-7, type of input current: three-phase, total height: 892 mm, total width: 508 mm, total length: 1,090 mm, input voltage: 400 V, overall weight: 108 kg, type of cooling: water, hose package length: 4,000 mm, electrical fuse: 32 A, open-circuit voltage: 80 V, welding current at 60% duty cycle: 400 A, welding current at 100% duty cycle: 300 A, input current: 32 A, protection type (IP code): IP23, welding current (min.): 20 A, welding current (max.): 400 A, Equipment: documentation/manual, type plate available, Demonstration unit, year of manufacture 2024 includes Lorch MIG-MAG torch iQ-LMS 400 W PM, 4 m. Bodpfx Aezki Szomyodf

Condition: used, Year of construction: 2015, functionality: fully functional, A collection of Kemppi welding machines is available for sale, either as a complete set or individually. These welding machines come from a welding training program. You are welcome to inspect them at our Chemnitz location. - Kemppi ACDC MasterTig 3500 Three-phase TIG welding machine, capable of both AC and DC welding Stick electrode welding (MMA) With integrated cooling unit - Kemppi ACDC MasterTig 2500 - Kemppi MasterTig MLS 2300 (2x) Bjdpezkaikefx Amyodf - Kemppi MasterTig MLS 3500

Condition: excellent (used), Year of construction: 2021, operating hours: 157 h, functionality: fully functional, machine/vehicle number: 20029618, type of input current: DC, input voltage: 230 V, type of cooling: water, laser power: 1,000 W, input frequency: 50 Hz, laser wavelength: 1,070 nm, Used Fanuci LW-PRO-F01 laser welding machine Power: 1000 W Bdsdpfx Amjzi Spgeyef Year of manufacture: 2021 Only 157 hours of welding time Used, fully functional, recently serviced, complete with accessories (nozzles, lenses, etc.) Includes wire feeder.

Condition: excellent (used), Here we offer you a Bielomatik laser welding system. Bielomatik laser welding system Machine description: The laser unit with integrated cooling for the laser is located in the lower left part of the machine frame. The tools are mounted on a 2-station rotary table that rotates 180 degrees with each cycle. In the middle part of the machine frame, there is the working area with the welding station, the tool (on the rotary table), and the clamping device for the product. The control cabinet is installed at the rear. The welding station is protected against the loading/unloading area with a laser-safe enclosure. The welding laser (the laser power supply) is switched off when a maintenance door is opened. The loading and unloading of the welding parts is done manually. The welding process runs automatically. Laser type: YLR-300-AC-Y11/IPG The cell was used for laser welding of various plastic parts (front frames). For components with dimensions of approximately 460 x 280 mm. Basic data Machine equipment: 1 complete machine frame with enclosure, substructure, and safety devices, painted Bdjdpfx Aszgaazomysf Adjustable machine feet, designed for transport with a forklift. 3 manual maintenance doors in the laser-safe processing area, each secured with a safety door switch with interlock. 4 manual maintenance doors below the machine table. The control cabinet is permanently mounted on the rear of the machine. Laser system manufactured by IPG. 1 fiber laser, 300W cw, at the fiber optic end, 1070nm, completely air-cooled. 1 power supply for the laser unit, target beam laser, and fiber optic cable. 1 Vario-Scan for 3D welding contour. 1 scanner - 20 aperture. Optics, F-Theta lens, focal length determines the processing field and processing distance. 2x base tool, tool coding with transponder. Clamping/tensioning system for holding a mask with absolute encoder. with pneumatic clamping system for controlled pressing of each welding part. Pneumatic air shower for protection of the lens housing. Microbox PC427B incl. RTX (Siemens). Pre-installed software, Siemens S7 PLC. Profibus, Profinet, Ethernet, RS232 interface. Touch panel 15" for operation and input of data/parameters. Machine lighting. Connection flange for external extraction system. Machine data: Dimensions: Machine W x D x H: approx. 2330 x 2350 x 2500mm Control cabinet: Permanently screwed to the machine frame. Area required W x D: 5400 x 5400mm Technical data: Power supply: Number of phases/rated voltage 3x400V 50Hz Connected load 5KVA Fuse rating: 16A Exhaust: Nominal size ∅160 Airflow rate 500-1000 m³/h Weight approx. 2000 kg Type: K3633/023 Condition: used (Changes and errors in the technical data are reserved!) We are happy to answer any further questions you may have by telephone.