Used Radial-Mitteldruckventilator Elektror Rd64 for sale (892)

Year of construction: 2009, condition: used, machine/vehicle number: WW12698, Product Information "Radial Medium-Pressure Fan" Radial Medium-Pressure Fan Type/Model: Elektror RD 64 Condition: Used, very good Technical Data Volume Flow max.: up to 142 m³/min Pressure max.: up to 10,600 Pa (total pressure increase) Motor Power: 1.5 kW Lsdpfx Aszm N Nxjf Ssrt Dimensions: approx. 600 x 440 x 720 Weight: approx. 42 kg Inquiry Item: Shipping costs will be provided in an individual quote.

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 100 h, functionality: fully functional, A new, unused centrifugal fan from Elektror is offered for sale here. This was bought for one of our projects but was never used. Availability: In stock Quantity: 1 piece Lrsdpfx Afjkt S S Ne Sst Further information can be found on the nameplates. Feel free to contact us if you have any questions.

Condition: good (used), Side channel compressor, side channel blower, ring blower, vacuum pump, blower, radial fan, pressure blower -Manufacturer: Elektror, pressure blower radial fan type RD 92 -Drive: 15 kW Lrjdpownccqefx Af Sjt -Speed: 2950 rpm -Volume flow rate: 7500 m³/h -Pressure: 8300 Pa -Inlet connection: Ø 220 mm -Outlet connection: Ø 220 mm -Protection class: IP 54 -Fan wheel: Ø 720 x 60 mm Quantity: 1 piece available -Dimensions: 960/910/H1075 mm -Weight: 210 kg

Condition: used, Three-phase motor, electric motor -Manufacturer: Elektror, electric motor for radial fan type D-06 / S484 -Power: 0.5 kW -Speed: 2800 rpm -Shaft: Ø 14 x 35 mm -Protection class: B TROP Ledpoupbc Asfx Af Sjrt -Dimensions: 295/200/H150mm -Weight: 6.5 kg

Condition: used, Radial fan, low pressure fan, dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower -Manufacturer: Elektror, radial fan low pressure fan type D-06/S 484 -Volume output: 10 m³/min -Fan wheel: Ø 170 x 90 mm -Speed: 2800 rpm -Inlet: Ø 105 mm Lrjdpfxeuqf Ile Af Set -Air duct connection: 110 x 110 mm -Dimensions: 410/280/H365mm -Weight: 12.3 kg

Condition: used, Donau DR52 Drilling capacity in steel (diameter) 52 mm Arm length 1140 mm Workpiece height max. 830 mm Drilling capacity in cast iron 60 mm Taper MK 5 Table size 1100 x 620 mm Drilling spindle stroke 225 mm Spindle speed range 28 - 1400 rpm Lrjdpfxjz D U Tzj Af Sjt Feed rate 0.1 - 0.5 mm/rev Total power consumption 10.0 kW Machine weight approx. 3.5 t Machine dimensions approx. 2.4 x 1.3 x 2.61 m

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, Plank SRB 35 High-Speed Radial Drilling Machine MK 4 German manufacturer In original, almost new condition, not repainted. I have owned several high-speed radial drilling machines, but I was very surprised by this one. Stepless speed adjustment with 2 gear stages, stepless feed, threading device, Coolant system, excellent clamping, complete documentation, Runs as smoothly as a new machine. Speeds: 0 - 2880 Lredpfx Aoz A Ud Djf Sst Table: 1050 x 400 Overhang max. 1040 min. 370 Distance table to spindle max. 650 min. 280 Drilling stroke 140 Weight: 1900 kg Can, of course, be inspected while powered on. Free loading at D - 88433 Schemmerhofen.

Condition: ready for operation (used), High-speed radial drilling machine, MK 2 Speed infinitely adjustable Ledpfxez D D I Io Af Sert Drilling head electrically adjustable

Condition: like new (used), Year of construction: 1999, functionality: fully functional, power: 4 kW (5.44 HP), tool diameter: 50 mm, spindle mount: MK 5, height adjustment type: electric, rotational speed (max.): 2,500 rpm, rotational speed (min.): 28 rpm, total width: 1,120 mm, total length: 3,100 mm, total height: 3,396 mm, table width: 396 mm, table length: 1,820 mm, overall weight: 4,300 kg, year of last overhaul: 2026, Equipment: CE marking, cooling unit, documentation/manual, “CE” version, after undergoing a comprehensive overhaul including a new paint job in 2026, with functioning cooling system, complete with all documentation, fully operational. Option for testing available in the town of Dobříš, Czech Republic. Lrsdpfezy Samox Af Set

Condition: used, Kolb radial drilling machine Lredpfsz Eanaox Af Sst ready for loading onto a truck Technical specifications will be available shortly.

Condition: good (used), Year of construction: 1955, Radial drilling machine, drilling machine, boom drilling machine -Projection: 2055 mm -Max. distance from machine table to spindle mount: 1700 mm -Conical mount: MK5 -Motor power: 7.5 kW -Speeds: 11.2-1400 rpm -Columns: Ø 450 mm -Spindle stroke: 540 mm -Thread cutting device -Automatic feed: 0.037-2.0 mm/rev -Clamping surface: 920 x 1600 mm -Dimensions: 2580/1110/H3450 mm -Weight: 6465 kg Lodpfxjd Enr Ij Af Sjrt

Condition: good (used), Includes tool cabinet and drill bits! 2. Table Work area: 600mm x 1200mm Tool holder: MK 4 Lsdpfx Aez Db Eqef Sjrt Drilling capacity: 40mm in steel Tapping attachment Coolant system

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, controller model: SIEMENS SINUMERIK 840D SL, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 10 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area: 3,000 x 1,500 mm Laser power: 4,000 W Sheet thickness, mild steel max.: 20 mm Sheet thickness, stainless steel max.: 15 mm Sheet thickness, aluminum max.: 10 mm Lodpfoz Ay Rrjx Af Sjrt Lens cutting head diameter: 250 mm MACHINE DETAILS Control system Control model: SINUMERIK 840D SL Screen: 17" touch color screen Voltage: 400 V Frequency: 50 Hz Electrical standard: IEC EQUIPMENT Closed machine frame with integrated laser unit Torque drive in combination with linear direct drives CO₂ laser TruFlow 3200 with optimized standby mode High-frequency excitation Installation plans and installation conditions, 2 copies Motion unit for highly precise machining Closed beam guidance Single cutting head strategy Cooling unit Automatic pallet changer in the longitudinal direction Wide longitudinal conveyor belt Ergonomic control panel with touch color screen Work area lighting Position laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Transport and assembly device Maintenance-free turbo radial blower Gas mixer integrated Laser control TASC Laser power control Laser logbook function Lens cutting head with 250 mm lens Universal cutting device with bus connection LensLine with condition monitoring ControlLine: Height control and sheet edge detection Easy operation Simple workshop programming Advanced workshop programming Fast re-production Automatic shut-off ContourLine FastLine FlyLine Microweld Production plan AdjustLine Teleservice via internet USB interface RJ-45 network connection CE marking Light barriers Multi-chamber extraction system Compact filter unit Machine enclosure with Makrolon panels TruTops Laser initial license TruTops Laser secondary license TruTops Tube follow-up license Documentation TruLaser 3030 Documentation, 2 copies, 1 x paper / 1 x CD Note: The operating hours can be found in the last image.

Condition: like new (used), Year of construction: 2020, Donau Flex 135 High-Speed Radial Drilling Machine Manufacturer: Donau Type: Flex 135 High-Speed Radial Drilling Machine Condition: used, very good to like new Year of manufacture: 2020 Stepless speed control Stepless quill feed Threading device Dimensions and travel ranges Tool holder: MK 4 Column diameter mm: 170 Table dimensions mm: 1200 x 600 Number of T-slots: 4 Distance between T-slots mm: 125 Quill stroke mm: 165 Column stroke mm: 450 Drilling capacity in solid steel 60 mm: 35 Cast iron 22 mm: 42 Threading steel 60 M 30 Cast iron 22 M 36 AC motor, frequency-controlled kW 4.0 at 100% duty cycle. Speed range: min-1 20 – 3200 Feed, stepless mm/rev: 0.02 – 0.7 Machine light Spindle guard Ledpfxozza Nxs Af Sert

Condition: ready for operation (used), Year of construction: 1975, arm 1200MM stroke head on bench 1400MM universal head Lredpevm Akgefx Af Set portable radial

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: contino spezial 260, total length: 10,200 mm, total width: 2,532 mm, total height: 2,487 mm, water consumption per time unit: 4 l/min, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, pressure: 6 bar, temperature: 80 °C, heating capacity: 50 kW (67.98 HP), power: 75 kW (101.97 HP), waste water connection: 50 mm, water pressure: 2 bar, water connection: 25 mm, Equipment: documentation/manual, Machine description - the lids of the crates can be folded down to the side, total transport height approx. 1000 - 1050mm - the two track belts each have 2 guides on the side, one guide each from above and a cam spacing of 700mm - Feed zone with 1500mm straight length with drive, working height approx. 1000mm - Main washing zone with 2700mm length, tank 600l with heating 50kW, (20kW possible via hot water) washing temperature 55-60°C, 1 stainless steel centrifugal pump 7.5kW 1500l/min at 2bar, stable external box filter, brush cleaning takes place after the first spray cleaning with an external brush, then repeated spray cleaning, - 1800mm rinsing zone with approx. 150 - 250l/h via direct fresh water supply, the fresh water is supplied hot at at least 60°C; 500mm feed zone with top suction connection (stainless steel radial fan, DN 250 connection); 1800mm long blow-off with 2 5kW fan motors; 500mm long discharge table Washing, rinsing and drying system length 8800mm Hourly output (adjustable with LENZE frequency inverter) approx. 250-300 crates with hinged lids (cross flow) or 500 lids in longitudinal flow incl. label removal with lateral brushes (LENZE drive 0.37kW) Brush cleaning takes place after the first spray cleaning with an external brush, followed by a second spray cleaning, Additional hot water heat exchanger in the machine, Drum filter for automatic label discharge, with this equipment the dirty water in the main flow is fed through a drum filter, the label dissolution and mash formation is significantly reduced, the washing tank capacity can be used for several shifts without changing Gravity roller conveyor for Euro pallets, internal width 840mm, very stable design made of 4mm thick stainless steel sheet, the rollers are made of galvanized steel 5000mm The machine has the following connections: - Fresh water at approx. 60-80°C 3/4", flow pressure min. 2 max. 6bar via hose connection 3/4" - Electricity: max. approx. 50kW, 400V 50 Hz - Waste water DN 50 discharge into floor drain Lsdpfx Aerr Smlsf Sert - Hot water 1 1/4" flow and return, flow temperature min. 80°C, flow rate approx. 3-4m3/h Key advantages of our machines: - completely double-walled, sound and heat-insulated machine housing, manufactured in one piece and completely welded, low energy consumption - reliable operation, very long service life - long washing treatment and nozzle and washing system refined over the years = excellent washing results - Nozzle arms can be removed and cleaned without tools, stainless steel nozzles with large passage and optimized droplet size = good cleaning effect + insensitive to soiling - Washing tunnel designed for crate size 300x400x600mm - Use of first-class attachments, e.g. LENZE drive and frequency converter, EDUR stainless steel centrifugal pump, stainless steel ELEKTROR Esslingen blow-off motor with motor separation and SIEMENS switch cabinet components

Year of construction: 2020, condition: good (used), functionality: fully functional, machine/vehicle number: HG-1020-5571, The machine shown is a HEBÖ RBV-12SV pipe drilling machine with extensive accessories. The machine is designed for the processing of pipes and profiles and is used as a semi-automatic pipe drilling machine. According to the manufacturer, it is suitable for applications in, among other things, railing construction, shelving system construction, and the furniture industry. Lodpfszypgdex Af Sert The processing can include drilling, reaming, core drilling, and thread forming. The RBV-12SV has an automated processing sequence after manual clamping of the workpiece. Technical specifications according to the data plate of the machine shown: Manufacturer: hebö Maschinenfabrik GmbH Machine type: RBV-12SV Machine number: HG-1020-5571 Year of manufacture: 2020 Voltage: 400 V Frequency: 50 Hz Power: 5 kW Current: 11.5 A Weight: 555 kg The manufacturer's specifications for the RBV-12SV also include a speed range of 0–2,250 rpm and a feed rate of the drilling unit of 0–300 mm/min. Depending on the model, pipes up to 3" or 88.9 mm, square profiles up to 80 × 80 mm, and other profile shapes can be processed. Optional: with mounted pneumatic/manual thread drilling device CMA LCN 12 with compressed air drilling unit (yellow attachment).

Condition: ready for operation (used), Danube DR 23 - High-speed radial drilling machine - Drilling capacity / steel approx. 28 mm - Arm length approx. 700 mm - Morse taper MK 3 Ljdsztdz Ajpfx Af Sort - Speed range 70-1550 rpm - gearbox - Feed rate range 0.075-0.3 mm - Drilling depth 130 mm - Threading device - Hydraulic clamping - Documentation Dimensions: L x W x H 2 x 1.7 x 1.9 meters / Weight 1900 kg Errors and omissions excepted.

Condition: used, Year of construction: 2000, machine/vehicle number: 11.985, functionality: unexamined, input voltage: 400 V, type of input current: three-phase, throat depth: 1,600 mm, Radial drilling machine Reform RB 50/16, year of manufacture 2000, machine no. 11,985. Connection 400 V, 50 Hz, total power 6.5 kW. Drilling capacity in steel 50 mm, arm reach 1,600 mm. Equipment: Digital display Acu-Rite, clamping cube and clamping table with T-slots, T-slot base plate. Lsdpfsz A Ulujx Af Sjrt Location: Homburg (Saar), Germany. Inspection by appointment only. Price on request, net plus VAT, ex location; dismantling and loading to be arranged. All information without guarantee.

Condition: good (used), Year of construction: 2016, machine/vehicle number: 160409, Offer 26217 Technical specifications: Lrodpfx Afoz Arnij Sst - Drilling capacity in full steel ST 60: 40 mm - Thread cutting ST 60: M 30 - Drill spindle connection: MK 4 - Quill stroke: 200 mm - Drill spindle speeds, stepless: 50 - 2000 rpm - Drilling feed rates: 0.08 - 0.50 mm/rev - Height adjustment of the drill column: 380 mm - Overhang: 950 mm - Travel of the upper slide: 590 mm - Table size: 1200 x 500 mm - Drive: 400 V / 4.5 kW - Space required (approx.): W 1200 x H 2400 x D 1700 mm - Weight (approx.): 2700 kg - Includes: - Thread cutting device - Hydraulic column and arm clamping - Coolant system - T-slots, vertical, on the left side of the machine - Various accessories

Condition: good (used), Year of construction: 1979, functionality: fully functional, Drilling capacity into full 32 mm Tapping capacity into full M 32 mm Motor power 1.5 / 3 kW Tool holder MK 4 Quill stroke 170 mm Stroke approx. 400 mm Speeds : Range 1 , infinitely variable from 38 - 192 rpm Range 2 , infinitely variable from 119 - 596 rpm Range 3 , infinitely variable from 400 - 2000 rpm Lredsz Ad Rcepfx Af Sst

Condition: used, Year of construction: 1978, machine/vehicle number: 78004, functionality: fully functional, type of input current: three-phase, We are offering this used Csepel 12UH/1600 radial drilling machine, year of manufacture 1978. Lrodpfeyh Uaqjx Af Sot Model: 12UH/1600 Serial number: 78004 Power type: 3~ Wiring diagram no.: 358000 If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 37,000 h, controller model: Siemens Sinumerik 840 D, laser power: 3,200 W, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 115 mm, TECHNICAL DETAILS Laser power: 3,200 watts Travel range, X-axis: 2,500 mm Travel range, Y-axis: 1,250 mm Travel range, Z-axis: 115 mm Sheet thickness, structural steel max.: approx. 20 mm Sheet thickness, stainless steel max.: approx. 15 mm Sheet thickness, aluminum max.: approx. 8 mm Lrjdpjz A D Irofx Af Sst MACHINE DETAILS Control system: Siemens Sinumerik 840 D Total connected load approx.: 88 kVA Machine hours: 74,000 h Beam hours: 37,000 h Dimensions & Weight Footprint: 8,660 x 6,110 x 2,700 mm Machine weight: approx. 7,300 kg EQUIPMENT Closed machine frame with integrated laser unit Automatic pallet changer TFT color screen Positioning laser diode Spray device Motion unit for high-precision machining Additional high-dynamic Yp axis Drives with maintenance-free three-phase servomotors Closed beam guidance Conveyor for small parts and waste TRUMPF laser CO2 laser TruFlow 3200 High-frequency excitation Low-maintenance turbo radial blower Gas mixer (integrated) Laser power control Laser logbook function Laser cutting head with 5" lens Laser cutting head with 7.5" lens Universal quick-change device ControlLine Control system SINUMERIK 840D Automatic shut-off ContourLine SprintLine Teleservice Microweld RJ45 network connection Network connection via telediagnostics CE marking Light barriers Multi-chamber extraction system Compact dust collection system

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, drilling capacity: 40 mm, quill travel distance: 200 mm, table length: 1,200 mm, table width: 600 mm, drill spindle length: 200 mm, overall weight: 1,700 kg, input voltage: 400 V, travel distance Y-axis: 780 mm, input frequency: 50 Hz, distance table to spindle center: 800 mm, Donau DR40 Z Manufacturer: Donau Machine type: Radial drilling machine / Quick-change radial Designation: DR40 Z Year of manufacture: 1992 Drilling capacity: 40mm Threading capacity: M33 in steel Taper: SK 40 Feed rate: 0.075 - 0.15 – 0.3 – 0.45 – 0.6 / revolution Drilling spindle speed: 18 Overhang: 800mm Drilling spindle stroke: 200mm Vertical adjustment of the drilling spindle head (electric): 450mm Max. distance between table and spindle: 780mm Table: 600x1200mm Machine weight: 1700 kg Lrodpfx Afoz Da Idj Set Documents: Operating manual, wiring diagram, spare parts list, test report The machine was completely overhauled by Vaumatec, 89431 Bächingen, in 2016 and has been used very little since. The machine is in very good condition. Purchased in 2016.

Condition: ready for operation (used), functionality: fully functional, COLETT - Gamesa – Radial drilling machine “PORTABLE, operated by crane” -Outreach approx. 1200 mm -Universal swivel head -Spindle speeds 95 – 750 rpm -Automatic feed -Morse taper shank MK 4 -Outreach height-adjustable, approx. 1400 mm Lredpfozpfy Sox Af Set -Control cabinet / Retrofit Dimensions: L x W x H 2 x 1 x 2.1 meters / Weight 1600 kg Errors and omissions excepted.