Used Promau 4R 30/D for sale (62,663)

Year of construction: 2000, condition: ready for operation (used), A hydraulic 4-roll plate rolling machine Promau (Prümau) is available. Working width: 3000mm, bending capacity: 13mm, pre-bending capacity: 10mm, rolls: 4. An on-site inspection is possible. Bdsdpfxszhw Tuo Amrjh

Condition: used, Year of construction: 2022, operating hours: 360 h, functionality: fully functional, machine/vehicle number: 521080, total height: 3,780 mm, total length: 10,800 mm, total width: 5,160 mm, volume flow: 27,000 m³/h, type of input current: AC, inner dimension height: 3,000 mm, inner dimension length: 10,000 mm, inner dimension width: 5,000 mm, input voltage: 400 V, space requirement height: 3,780 mm, space requirement length: 10,800 mm, Equipment: cabin, documentation/manual, emergency stop, lighting, DURST combined painting and drying system D-LTA 30/30-ü-natural gas – Year of manufacture 2022 For sale is a high-quality combined painting and drying system from the manufacturer DURST, type D-LTA 30/30-ü-natural gas, year of manufacture 2022. The system is in very good and well-maintained condition and is suitable for the professional processing of both conventional and water-based paints. It can be used flexibly in spray and drying operations and features a powerful supply and exhaust air system, natural gas heating, heat recovery, and a modern PLC and frequency inverter control system. Technical highlights and features: • Manufacturer: DURST Lackier- und Trocknungsanlagen GmbH • Type: D-LTA 30/30-ü-natural gas • Year of manufacture: 2022 • Design: combined painting and drying booth • Booth internal dimensions: approx. 10,000 × 5,000 × 3,000 mm • Booth external dimensions: approx. 10,800 × 5,160 × 3,080–3,780 mm • Air flow rate: approx. 27,000 m³/h for both supply and exhaust air • Motor power of ventilation: 2 × 11 kW • Total electrical connection: approx. 25 kW • Heating power: up to approx. 250 kW • Heating: direct gas surface burner, natural gas • Drying temperature: up to approx. 70 °C • Air changes: approx. 180 times • Air velocity: approx. 0.50 m/s • Heat recovery via cross-flow heat exchanger • Manufacturer's specification for heat recovery: approx. 47 % efficiency on average per year, up to approx. 80 % recovery factor under optimal conditions • DURST EcoTronic system with frequency-controlled fan control • Operating modes including spray operation, partial load operation, stand-by operation, and hall heating operation • HPS heating program control for efficient drying, especially for water-based paints • PLC control with frequency inverters and monitoring devices • Remote maintenance module • LED ceiling lighting, Ex-Zone 2 • Illumination level approx. 1,090 Lux • Rear extraction wall with paint mist separator • Pre- and post-filtration of the supply and exhaust air • Partial filter ceiling with fine dust filtration • Sectional door and two partially glazed emergency exit doors • Insulated, double-walled booth housing with 80 mm mineral wool panels In spray operation, the system operates in fresh air/exhaust air mode. The drawn-in fresh air is filtered and heated via the gas surface burner. The exhaust air is passed through the paint mist separator and post-filtration. In drying operation, the system operates primarily in recirculation mode with a fresh air proportion of approx. 10 %. The integrated HPS control system enables energy-efficient and uniform drying and is particularly interesting for processing modern water-based paints. Another significant advantage is the integrated heat recovery system, which allows a considerable amount of the heat contained in the exhaust air to be fed back into the process. Bjdpjzubtljfx Amredh The system dates from 2022 and is in very good condition. Due to the generous booth dimensions, the high air flow rate and the extensive control and energy technology, it is ideally suited for industrial and commercial painting applications. Further technical documents and documentation for the system are available and can be provided upon request.

Year of construction: 2003, condition: used, functionality: fully functional, empty load weight: 3,000 kg, total length: 12,500 mm, total width: 5,600 mm, machine/vehicle number: 0-280-15-2017, We offer a used, automatic, two-chamber loading station from the renowned BARGSTEDT brand, model RTBH22/D/30/12. This unit is ideal for modern woodworking facilities where efficiency and process automation are crucial. Thanks to its two chambers, it ensures continuous operation and significantly improves material handling, minimizing downtime. The robust construction and the reliability of the BARGSTEDT brand guarantee long-lasting, trouble-free operation. Automatic loading from two chambers. Capacity: 8 cycles/minute. Loading with vacuum suction cups. Maximum panel size: 1300*2500. Bdedpfxszgcd Ao Amrsh Option to purchase the entire line, including a roller conveyor equipped with a conical swivel and a double-sided edge banding machine, IMA COMBIMA I K/II/R75/760/V/R3.

Condition: used, Year of construction: 1998, functionality: fully functional, cooling capacity: 3.3 kW (4.49 HP), input voltage: 400 V, input frequency: 50 Hz, Oil Cooler - Flow Oil Cooler D20V D30V 2 Flow Oil Coolers - Coolant system for machine cooling - individual sale possible. Two stand-alone flow oil coolers / circulating coolers for cooling oil / hydraulic oil from Wöhr Kältetechnik for cooling / temperature control of the coolant circuit or the hydraulic system on machine tools, with integrated circulation pump and flow monitor. Control cabinet with connection cable integrated into the housing, LAE temperature controller MTR11 and potential-free alarm contact in case of malfunction. The integrated circulation pump is a gear pump. The cooling units are suitable for clean oil. Instructions for programming the temperature controller are available. Both coolers are in used condition. Cooling unit. Wöhr Flow Oil Cooler Type D 20 V, Year of manufacture 1998, serial number 98101582, cooling capacity 2 kW, refrigerant R 404 a, with integrated circulation pump, operating voltage 400V, 50Hz, LAE controller MTR11, with Walter Procon connection plug (cooler was installed on the hydraulics of a grinding machine), dimensions approx. 80 x 75 x 110 cm, total power consumption 1.7 kW. Flow Oil Cooler D 30 V Wöhr Flow Oil Cooler Type D 30 V, year of manufacture 1998, serial number 98101583, cooling capacity 3.3 kW, refrigerant R 404 a, with integrated circulation pump, operating voltage 400V, 50Hz, LAE controller MTR11, with CEE connection plug (cooler was installed on the grinding oil supply of a grinding machine), dimensions approx. 80 x 75 x 110 cm, total power consumption 2 kW. The oil coolers are in used condition and well maintained. Bdsdpfx Amsg U H E Seroh Price negotiable Our target price per unit is €1,950 net, ex works, plus packaging costs. All technical specifications are subject to printing errors/mistakes. We only sell to countries within the European Union.

Condition: ready for operation (used), Year of construction: 1991, machine/vehicle number: 4079, functionality: fully functional, power: 7.5 kW (10.20 HP), pressing force: 30 t, stroke length: 500 mm, table width: 1,200 mm, table length: 1,000 mm, table height: 850 mm, ram plate width: 600 mm, ram plate length: 400 mm, distance table to ram: 800 mm, oil tank capacity: 400 l, total length: 2,200 mm, total width: 2,400 mm, total height: 3,500 mm, overall weight: 4,000 kg, year of last overhaul: 2023, Equipment: CE marking, safety light barrier, For sale is a hydraulic double-column press. Manufacturer: Hans Schoen, Type: NH/D 30S. The machine is in perfect working order and can be inspected while powered on. Bsdpjzzd Rgefx Amrsdh

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 12,199 h, load capacity: 3,000 kg, lifting height: 4,100 mm, free lift: 150 mm, fuel type: diesel, mast type: simplex, construction height: 2,730 mm, fork length: 1,600 mm, drive type: Diesel, Diesel forklift Mast type: Standard Bedpez El A Nefx Amrodh Condition: Ready for use and fully functional Technical condition: Normal Front tire type: Superelastic Front tire condition: 40 - 60% Rear tire type: Superelastic Rear tire condition: 60 - 80% Side shifter, fork positioner, 3rd valve, 4th valve, partial cabin

Condition: used, Year of construction: 2003, - Workpiece length: 800 - 3000 mm - Workpiece width: 350 - 1400 mm - Workpiece thickness: max. 70 mm with edge / max. 80 mm for milling - Main spindle 12 kW - Tool changer, 18-position CNC machining center Manufacturer: Homag Type: PROFI BAZ20/30/16/V/D Year of manufacture: 2003 Technical data Homatic - CNC control CNC programming system WOODWOP Postprocessor Workpiece dimensions - Workpiece length: 800 - 3000 mm - Workpiece width: 350 - 1400 mm - Workpiece thickness: max. 70 mm with edge / max. 80 mm for milling - Edge band width: min. 120 mm - Weight: max. 150 kg Throughfeed table - Longitudinal console 1, fixed installation - Longitudinal console 2, manually adjustable via width adjustment in the Y-direction - 8 vacuum clamps 125 x 50 x 100 mm - Working height, bottom edge of workpiece: 950 mm Motor, width adjustment, longitudinal console, traversing table - For different workpiece widths via servo drive for throughfeed table - Per longitudinal console Chip conveyor - Chip and waste disposal via integrated chip conveyor under the longitudinal traverse Stop pins for top layer overhang - Stop pins with lifting-rotating mechanism for workpieces with max. 20 mm top layer overhang - Individually selectable, end position monitored, stroke 110 mm - For manual placement of doors Vacuum pump 100/140 m3/h Unit for positioning the vacuum clamps - Mounted on the unit carrier with pneumatic extension console - For max. 4 vacuum clamps per longitudinal console Main spindle 12 kW - Tool holder HSK F63 - Extraction system for all tools and units - Three-phase asynchronous motor 12 kW at S1, water-cooled - Tool weight: max 6 kg incl. holder - Tool length: max. 200 mm from the motor spindle bottom edge - Tool diameter: max. 180 mm for milling tools / max 200 mm for sanding tools - Frequency converter: 15 kW - Speed range: 1500 - 18000 rpm, stepless, programmable Bjdpjzux Tpefx Amredh - Full rated power from 12000 rpm Unit interface for the main spindle - For connecting the machining units - Pneumatic and swivel drive interface - C-axis with torque transmission and 3-point support Tool changer, 18-position For tools and units with HSK F63 Tool weight: 6 kg Tool length: max. 200 mm from the motor spindle bottom edge The following tool and unit configurations are possible - 18 x max. 130 mm - 9 x max. 180 mm and 9 x max. 70 mm - Tool diameter max. 200 mm for sanding tools - Tool changer can be raised for a moving pick-up station on the left side Drilling/milling unit, 4 spindles, for tool changer - For automatic changing in the main spindle - Collet holder ER25 up to max. 16 mm shank diameter - Tool protrusion max. 50 mm - Speed: max. 13500 rpm - Standard collet 10 mm - Infinitely swiveling via the C-axis - Without tool Lock case milling unit, 2 spindles, D=16/20 - With integrated blow-out nozzle - Two-sided spindle outlet with counter-rotating direction - Speed: 12000 rpm - Infinitely swiveling via the C-axis - Without tool 1x Weldon chuck: 20 mm - Reducing sleeve for tool 16 mm - Total tool length: 180 mm - Tool protrusion: max. 135 mm 1x ER16 collet with 10 mm - Total tool length: max. 70 mm - Tool protrusion: max. 40 mm Sawing/drilling unit, swiveling, for tool changer - For miter cuts and angled drilling - Manually swiveling 0 - 90 degrees - Mounting flange 30 mm with countersunk head screws - Tool diameter 52 mm - Prepared for miter saw: max. 180 mm - Drill chuck with Weldon chuck: D=10 mm - Speed: max. 9000 rpm - Infinitely swiveling via the C-axis -

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 7,850 h, load capacity: 3,000 kg, lifting height: 4,905 mm, fuel type: diesel, mast type: simplex, construction height: 3,150 mm, fork carriage width: 1,300 mm, fork length: 1,200 mm, empty load weight: 4,490 kg, total length: 2,800 mm, drive type: Diesel, construction width: 1,250 mm, Diesel forklift Load center: 500 ISO class: Pin-type Mast type: Standard Transmission: Hydrostatic Bsdpfx Aoz Hnvnomrsdh Technical condition: good Front tire type: Superelastic Front tire size: 2 x 27x10-12 Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire size: 2 x 23x9-10 Rear tire condition: 0 - 20% Battery year of manufacture: 2011 Double auxiliary hydraulics, integrated fork positioner with side shift, load guard, single-pedal operation, GV: 350mm - 1220mm, cabin with heater, lighting according to StVZO (German Road Traffic Regulations), 2x work lights at the front, 1x work light at the rear.

Condition: used, functionality: fully functional, Year of construction: 2001, operating hours: 7,155 h, load capacity: 3,000 kg, lifting height: 3,950 mm, free lift: 1,160 mm, fuel type: diesel, mast type: triplex, construction height: 1,890 mm, fork carriage width: 1,150 mm, fork length: 1,100 mm, empty load weight: 5,025 kg, total length: 2,750 mm, drive type: Diesel, construction width: 1,300 mm, Diesel forklift Load center: 500 ISO class: FEM 3 A Bedpsz H E Ihjfx Amredh Mast type: Triplex Transmission: Hydrostatic Technical condition: good Front tire type: Superelastic Front tire size: 2 x 23x10-12 Front tire condition: 60 - 80% Rear tire type: Superelastic Rear tire size: 2 x 200/50-10 Rear tire condition: 20 - 40% Battery year of manufacture: 2001 Additional single hydraulic circuit, integrated side shifter, single-pedal and single-lever design, semi-cab, suitable for container handling, 1 x work light at the front

Condition: good (used), Year of construction: 2020, Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan, low-pressure radial fan, blower, pressure blower, side channel blower, side channel blower, ring blower, vacuum pump, blower, radial fan -Manufacturer: cimme, dust extraction fan radial fan type CBJ G06330 E4 RD -Engine: 9.2 kW 2925 rpm -Volume flow: 35/63 m³/min -Connection: Inlet Ø 250 mm -Connection: Outlet Ø 250 mm -Fan wheel: Ø 660 x 70 mm -Protection class: IP55 -Dimensions: 1090/780/H1330 mm Bjdpfx Ajxpfylemrjdh -Weight: 245 kg

Condition: ready for operation (used), Year of construction: 1997, Max. workpiece length: 3600mm, max. workpiece width: 1400mm, length: 8750mm, width: 5250mm. Bdedjqvnl Tspfx Amreh

Condition: excellent (used), Year of construction: 1997, I sell the throughfeed drilling machine with HOMAG BST440/30/D. Year 1997 Configuration: 4+4 motors from under 1+1 motors from sides per 24 spindles / 32mm Bdsdpfxet Nddpj Amrsh 0 motors from back 2+2 motors from top 4 pcs. material pressure from top Very good condition. Available immediately.

Condition: good (used), Year of construction: 2004, Deep-hole drilling machine TBT Varioflex MD 30-1, serial no. 106254-11, year of manufacture 2004, 70 kW, SIEMENS 840D control system, tool changer, chip conveyor, paper band filter system, with a comprehensive set of drilling tools, drilling slide stroke 2,200 mm, drilling depth 1,500 mm, weight approx. 15,000 kg. Bdedpfxez Iccfs Amreh

Condition: used, Year of construction: 2012, machine/vehicle number: 7363126525, Item No. 26261 Hydraulic CNC Press Brake Technical data: - Pressing force 320 t - Working width 3050 mm - Distance between uprights 2550 mm - Overhang 460 mm - Installation height approx. 630 mm - Ram stroke 365 mm - Motor power approx. 37 kW - Space requirement approx. W 5700 x H 3250 x D 2450 mm - Weight approx. 17500 kg - Including: - Pivoting arm – control panel with control system CYBELEC EVA-10S; Y1 + Y2; X, R, Z - Motorized back gauge - Motorized crowning - Safety light curtain - Electric foot pedal - 4-way universal die, split - V-dies Bdjdezzzcmspfx Amreh - Split top tool set, various other tools

Condition: used, CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, valve module, valve amplifier, circuit board, analog distribution card, load amplifier, load amplifier -Manufacturer: bg Bernd Grigat, load amplifier from injection molding machine Demag D 100-275 NC -Type: QVA 30/1 Item No.: 2442/00 -Quantity: 2x amplifiers available -Price per piece Bjdpfxjn Hbcyo Amrodh -Total dimensions: 100/40/H110 mm -Weight: 0.3 kg/pc.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, clamping force: 150 kN, screw diameter: 18 mm, clearance between the columns: 220 mm, total length: 2,100 mm, total width: 800 mm, overall weight: 1,550 kg, Clamping force: 15t Year of manufacture: 2001 Injection unit 30 Screw diameter: 18 mm Pump motor power: 5.5 kW Cylinder heating band power: 3.9 kW Bdodpfx Aez Egkujmrsh Tool clamping unit 150 Clamping force: 15 t Distance between columns: 220 x 220 mm Weight: 1550 kg Footprint: approx. 2100 x 800 mm Control system: Selogica ARBURG Allrounder 220 S 150-30, year of manufacture 2001 Equipment / condition: - Selogica control system with CF card reader - Clamping force 150 kN, injection unit 30, 18 mm screw (screw/cylinder inspected) - Very compact machine, footprint approx. 2.1 x 0.8 m – ideal for small parts - From a tool shop (trial molds and pre-production runs), little used in recent years - No peripherals (dryer and hopper available upon request)

Condition: good (used), Year of construction: 2004, functionality: fully functional, VMC300 D with 4-axis capability. Bdsdpfx Amsz Ehp Eoreh

Condition: used, Year of construction: 2009, wheel diameter 300 mm grinding wheel width 50 mm no. of working stations 2 Stück turning speed range - stepless 1.450 / 2.900 U/min Bdodpfxsz Hz H He Amreh voltage 400 V total power requirement 1,6 / 22 kW weight of the machine ca. 130 kg dimensions of the machine ca. 1,10 x 0,50 x 1,30 m !!! ATTENTION !!! EXCELLENT CONDITION !!! This machine comes from a vocational school! - Serial No.: 090520004

Condition: used, Automatic double cell loader without pit for use in a squaring-edging line Motorized panel introduction transfer Double automatic panel loading station Suction cup system for moving the panels Bdsdpforzhfhsx Amreh Panel detacher Panels can also be worked in double rows Useful width of the panel 1300 mm Useful length of the panel 3200 mm Vacuum pump Motorized transfers for the introduction of panel stacks Motorized adjustment by automatic numerical control of the horizontal suction cup support bars Programming and control system

Condition: like new (used), type: HZO 50/30/600/D/GL piston diameter: 50mm piston rod diameter: 30mm stroke: 600mm Bdjdpsyxnwujfx Amreh perm. pressure: 103 bar

Condition: used, Year of construction: 2019, controller manufacturer: Sonstige, controller model: , _____ Description: Year of manuf. : 2019 Control : Sonstige Double unwinding reel with drive Design:Short design Band width min./max.:230 – 520 mm Coil weight max.:2 × 30 kN Number of reels:1 Coil outer diameter min./max.:1,500 – 2,000 mm Spreading range min./ max.:460 – 525 mm Coil delivery:Industrial truck Reel loading:From the front (operating side) Coil unwinding:From the underside of the coil Material:Aluminium, soft Strip thickness min./max.:0.8 – 1.2 mm Tensile strength (Rm) min./max. :100 – 250 N/mm² Strip cross-section max.:600 N/mm² Straightening capacity:See straightening diagram Strip speed min./max.:2 – 10 m/min Strip infeed height above floor: 2,100 mm Degree of automation:Fixed / ± XXX mm Operating mode:Jog mode on sight system parameters System stroke rate:45 rpm Bodpez Enbbofx Amredh Working direction:Right–left, front loading with forklift truck Flatness of installation site:± 15 mm Connection voltage:400 V, 50 Hz Ambient temperature:20 – 40 °C Compressed air connection:5 bar reel :Double reel with drive :Spreading :- Manual toggle lever system with hand crank :Coil limitation :22 November 2019 :22 November 2019 :- Single arms, manually adjustable according to scales, fixed at the front via :quick-release lever and at the rear via clamping screws :Brake/drive :- 2 frequency-controlled asynchronous motors :- 2 dual-circuit safety air pressure disc brakes :Swivelling :- Manual with 180° locking via pedal :Pneumatic pressure rollers with rubberised rollers at the top :mounted on brackets. :Hydraulic spreading :- Hydraulic spreading instead of manual spreading with hand crank :- Hydraulic unit with valves and piping mounted on the reel head :Belt pull-off and belt feed Belt loop :- Control via ultrasonic sensor/laser on the unwinding side

Year of construction: 2023, condition: used, Workpiece length: 3000mm, swing over bed/carriage: 800mm/570mm, turning diameter without gap bridge: 1035mm, gap bridge length: 330mm, bed width: 400mm, travel X/Z: 420mm/230mm, max. spindle speed: 1600rpm, spindle bore: 105mm, spindle mount: D1-8, spindle taper: MT5, tailstock taper: MT5, tailstock quill diameter: 90mm, tailstock quill stroke: 235mm, main drive motor power: 7.5kW. Machine dimensions X/Y/Z: approx. 4740mm/1140mm/1910mm, weight: approx. 3870kg. Including measuring system. Documentation available. An on-site inspection is possible. Bdodpfozxhlvsx Amrsh

Condition: used, Year of construction: 2021, total height: 2,810 mm, total length: 4,000 mm, total width: 2,250 mm, overall weight: 8,700 kg, CMZ TD-30-TM-800 CNC Turning-Milling Center Technical Specifications Manufacturer: CMZ Model: TD-30-TM-800 Year of Manufacture: 2021 Control System: FANUC 32i-TB Plus Maximum Turning Length: 800 mm Maximum Turning Diameter: 550 mm Spindle Power: 42 kW Bar Capacity: 82 mm Tool Turret: 16 positions Machine Weight: 8,700 kg Equipment: Driven Tools, C-axis, Chip Conveyor Travel Y-axis: 140 - mm Bdsdoz Exmnspfx Amreh Weight approx.: 8,700 kg Dimensions (LxWxH) approx.: 4000 x 2250 x 2810 mm Travel Z-axis: 800 - mm Travel X-axis: 380 - mm Control: FANUC 32i-TB Plus Spindle speed: 3500 - rpm Year of construction: 2,021 Terms of payment: 100% prepayment before pick-up Terms of delivery: Free loading on truck under power: No

Condition: ready for operation (used), Year of construction: 1989, Working width 300mm Working height 200mm 5 spindles Spindles diameter 50mm Spindles set: 1. Bottom – 7,5kW 2. left – 7,5kW 3. right – 7,5kW 4. top – 11kW 5. bottom – 7,5kW Feed speed max 34m/min – variator Feeder with cardan Toothened roll in the table before first head Table lubrication Jointer on two last heads Bdsdpszxx Hqefx Amrjh

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 400 V, input current: 5 A, input frequency: 50 Hz, Equipment: CE marking, documentation/manual, For sale: Losman air cleaning units in excellent condition, suitable for applications such as removing oil mist generated in metalworking. The cleaned air is returned to the workspace, and the condensed coolant collected during filtration can be recycled. There are 2 units available, one of which is from 2014. Both units have had their filters replaced. Bdedeyk Sknopfx Amrsh