Used Processing Plant for sale (21,958)

Condition: good (used), Cheese whey processing plant 15,000 Litres/Hour Plant consists of:- 250 litre stainless steel tank 15,000 litre/hr product pump complete with 5.5kw motor Tetra plex C8 SR plate heat exchanger SWEP gasketed hot water preparation unit Hot water pump complete with 3.0kw motor Automatic steam on/off valve Steam modulating valve Steam trap & Filter Njdpfxjzdz Nfe Amyjld Holding tube pipping and valving including 3 off x 2" 3 port flow divert valves RTD's for hot water, hot whey & cold whey High level probe for the balance tank

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, No reserve price – guaranteed sale to the highest bidder! Nodpfxsyz Rf Ts Amyjld Further details on the technical specifications and configuration of the system can be found in the attached documentation. TECHNICAL DETAILS Inlet Conditions Design flow rate: 40,000 Nm³/h Temperature: 25 °C Relative humidity: 50% Pollutants V.O.C. inlet concentration: max. 305 mg/Nm³ Average LHV: 7,500 kcal/kg Dust: < 3 mg/Nm³ Discharge Conditions after RC System Volume flow: max. 40,150 Nm³/h Temperature: 30 - 50 °C TOC concentration: max. 20 mgC/Nm³ Filtration Unit Air volume flow: max. 44,000 m³/h Operating temperature: 20 °C Rotary Concentrator Number of sectors: 3 Adsorbing active material: Zeolite Process volume flow: max. 41,000 Nm³/h Pollutant inlet concentration: max. 305 mg/Nm³ Process temperature: 20 °C Adsorption air volume flow: max. 38,950 Nm³/h Purge air volume flow: max. 2,050 Nm³/h Desorption air volume flow: max. 2,050 Nm³/h Desorption outlet concentration: max. 5,700 mg/Nm³ Blower BL-01 Air volume flow: max. 4,300 Nm³/h Operating temperature: 60 °C Static pressure: 5,900 Pa Total pressure: 6,290 Pa Power consumption: max. 12.8 kW Installed power: 18.5 kW Sound pressure level at 1.5 m distance: max. 89 dB(A) Blower BL-101 Air volume flow: max. 36,700 Nm³/h Operating temperature: 35 °C Static pressure: 2,400 Pa Total pressure: 2,620 Pa Power consumption: max. 38.4 kW Installed power: 55 kW Sound pressure level at 1.5 m distance: max. 84 dB(A) Blower BL-02 Air volume flow: max. 135 Nm³/h Operating temperature: 30 °C Static pressure: 5,000 Pa Total pressure: 5,050 Pa Power consumption: max. 0.4 kW Installed power: 2.2 kW Sound pressure level at 1.5 m distance: max. 70 dB(A) EQUIPMENT Documentation/manual included Note: The system has already been dismantled.

Condition: excellent (used), functionality: fully functional, Chip processing plant for the deoiling of chips of all types (can be customized to your requirements). With this system, coarse and foreign materials are not a problem! The machines are patented and specifically designed so that foreign parts in the chips are automatically ejected. Included in the scope of delivery: - SPYRA chip crusher ZE 2000 - AME hinged belt conveyor (between crusher and centrifuge) - SPYRA chip centrifuge 500H (can be replaced with the larger 600H centrifuge upon request) - Additional discharge conveyor (if required) Not included but available as optional upgrades: - Tipping and lifting device for fully automatic filling of the chip crusher - Filtration system for extracting oil from the chips for reuse - Control cabinet Technical data for the SPYRA chip crusher ZE 2000: Total height with hopper: approx. 2,318 mm Dimensions (L x W): approx. 1,500 x 800 mm Weight: 2,000 kg Motor power: 22 kW Voltage: 400 V/50 Hz Speed at tear arm: 40 rpm Torque at tear arm: 3,500 Nm Inner diameter of tearing hopper (bottom): 315 mm Inner diameter of tearing hopper (top): 782 mm Height of tearing hopper: 412 mm Hopper capacity (tearing hopper): 85 liters Hydraulic unit Motor power: 0.75 kW Pump output: 2.4 liters/min Hydraulic tank capacity: 5 liters Operating pressure: 10–80 bar Maximum pressure: 160 bar Technical data for SPYRA chip centrifuge PSZ 500 H: Outer diameter: Ø 1,160 mm Drum diameter: Ø 500 mm Feed hopper: Ø 700 mm Discharge hopper: Ø 800 mm Total height (with frame height 1,160 mm): 2,735 mm Motor power: 4 kW Connection: 400 V/50 Hz Drum speed: 1,200 rpm Hydraulic unit, Spyra standard Power: 4 kW Voltage: 400 V Nljdpfx Aeyzhdyomyed Tank volume: 100 l Operating pressure (without oil filling): 100 bar Inspection cover bolted. No electrical monitoring. Alternative larger centrifuge PSZ 600 H: Outer diameter: Ø 1,260 mm Drum diameter: Ø 600 mm Feed hopper: Ø 700 mm Discharge hopper: Ø 900 mm Machine height without base: 1,900 mm Discharge height: 835 mm Total height (with frame height 1,160 mm): 2,735 mm Total height is variable by adjusting the frame and hopper height Motor power: 5.5 kW Connection: 400 V/50 Hz Drum speed: 1,000 rpm Hydraulic unit, Spyra standard Power: 4 kW Voltage: 400 V Tank volume: 100 l Operating pressure (without oil filling): 100 bar If needed, please contact us for a tipping and lifting device, swiveling discharge conveyor, filtration system, or control cabinet.

Condition: good (used), Year of construction: 1972, functionality: fully functional, This processing plant is designed for the production of creams, ointments, gels, pastes, lotions, suppository compounds, etc., with a usable volume of 100 liters. The total volume with the container closed is 123 liters; the minimum fill volume is 35 liters. The system consists of a fully enclosed stainless steel container with double jacket, which can be electrically or water heated/cooled. The container features a lid with integrated mixing units and drives. The mixing vessel is mounted on three castors and can be wheeled out for filling or cleaning purposes. The lid is mounted on a lifting column for hydraulic raising and lowering, enabling convenient cleaning and emptying. It is fitted with an observation window and two inlets with valves, which can also be used for adding other product components. Additionally, an adjustable mechanism is provided for setting the grinding gap of the colloid mill. Technical specifications: Container: Permissible operating pressure: 1 bar / -1 bar Nledpfx Aeyx Sxcjmyed Homogenizer: 1,500/3,000 rpm – 1.8/2.5 kW Anchor agitator: 19/38 rpm – 1.8/2.3 kW Spiral agitator: 29/58 rpm

Condition: used, Year of construction: 2011, functionality: unexamined, total length: 1,700 mm, total height: 1,400 mm, total width: 680 mm, overall weight: 400 kg, Centrotherm VLO 20-N2-HCOOH Vacuum Furnace/Process System Thermal process system with nitrogen and formic acid supply, including Leybold vacuum pump and control system. Year of manufacture: 2011. Well-maintained exterior condition, but without documentation and no available password – therefore only partially tested. Power: 10 kW; Load current: 25 A; Supply: 3/N~ 400/230 V 50 Hz; Breaking capacity: 0.3 kA; Operating hours: approx. 21,286 h Nedpsyubphefx Amyold

Year of construction: 2022, condition: like new (used), Rental unit A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant The Platform The platform has a universal adapter and contains the necessary electrical and mechanical components for all function modules. This gives you the opportunity to gradually purchase additional modules later and connect them without any problems. The Function Modules The modules contain all process engineering functional components for the respective picoline® variant such as classifier head, housing parts, grinding tools, motor adapters etc. and can be exchanged on the same platform at any time. Dry grinding and classifying Depending on the function module, 1 or 2 identical high-speed motors are used for dry grinding and classifying, except the Piconizer. Wet grinding The wet mill uses a slower running motor with high torque. The drive controller of the motor is located in the platform. Mixing and particle design The batch mixer and the high-energy mixer for particle design use the same slow-running motor with high torque. The motor drive controller is also housed in the platform. THE ACCESSORIES Depending on the operating mode (continuous, discontinuous) and the batch size, numerous peripheral devices such as agitator vessels, dosing devices, product separators, external blowers or barrier pressure systems are available as an option and are designed for specific applications. Nljdjd S D Uuepfx Amyed The machine was operated as a pilot plant. There are also many modules and many accessories available for purchase or rent.

Condition: like new (used), Year of construction: 2018, functionality: fully functional, total height: 1,000 mm, total width: 660 mm, total length: 1,250 mm, HERBST HRV S7 Laboratory Cream Processing Plant This machine is designed for mixing creams and pasty materials. Mixing container approx. 7 litres capacity Stainless steel container with heatable double jacket Combination mixing tool integrated into the container lid Container vacuum-proof Ingegrated vacuum pump Manufacturer: Sonstige Year of construction: 2018 Nedpfeypak Hsx Amyeld Floor Space: 100 x 66 x 125 cm

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, PAVAN, Italy PASTA PRODUCTION PLANT, CONSISTING OF: 1. SPAGHETTI LINE Manufacturer: PAVAN, Italy Year of manufacture: 1989 Control: CNC Specification Capacity 1250 kg/h Water consumption 400 l/h Overall dimensions L×W×H 48×7×7 m Line is consisting of Small mixer Large mixer Screw Pre-dryer Dryer ROTOTHERM®, completely overhauled and retrofitted “Night” store Foil packing machine Carton box packing machine 2. NEST PASTA LINE Manufacturer: PAVAN, Italy Nedpjxz Hm Rsfx Amyold Year of manufacture: 1962 Control: PLC Specification Capacity 300 kg Water consumption 100 l/h Overall dimensions L×W×H 42×5×5 m Line is consisting of TRABATO press Pre-dryer Dryer Foil packing machine 3. MACARONI LINE Manufacturer: PAVAN, Italy Year of manufacture: 1970 Control: Conventional + PLC Specification Capacity 850 kg/h Water consumption 280 l/h Overall dimensions L×W×H 30×5×5 m Line is consisting of TRABATO press Elevators Pre-dryer Dryer Collection hopper Foil packing machine 4. COUSCOUS LINE Manufacturer: PAVAN, Italy Year of manufacture: 1960 Control: Conventional + PLC Specification Capacity 200 kg/h Water consumption 70 l/h Overall dimensions L×W×H 40×5×5 m Line is consisting of TRABATO press Elevators Pre-dryer Dryer Collection hopper Foil packing machine ----- All the lines are in very good used condition, full working order, still in use and visible under power. More pictures and videos available on request.

Condition: new, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, For sale is a fully procured, modular GMP process system for the production of C1-Esterase Inhibitor (C1-INH) from human plasma. The plant was professionally engineered, procured, and has successfully completed FAT, but has never been installed or put into operation. This is expressly not a used line, but a factory-new project and module package. Year of manufacture: 2020 Condition: brand new, in original packaging Operating hours: 0 Storage: temperature-controlled warehouse SCOPE OF SUPPLY (EXCERPT WITH QUANTITIES) Adsorption / Chromatography (Bay 2 & 3): - 2 adsorption lines (DEAE / QAE) - 2 buffer tanks Nodpfeym Ayfex Amysld - 2 pigging systems - 2 cooled transfer lines (pipe-in-pipe) - 4 filter press racks - 4 cooling cascades - 4 CIP loops Precipitation PRE: - 3 pre-precipitation tanks (incl. 1,000 L) - 3 main precipitation tanks - 3 CIP stations - 3 multi-layer filters - 1 vacuum station Buffer Preparation (Bay 2 & 3): - 6 buffer vessels (NaCl, DEAE, QAE buffer) - 6 temperature control skids - 4 media/WFI/CIP distribution units LEP 2.3 – Washing & Elution Solutions: - 2 washing solution tanks (up to 9,000 L) - 2 elution solution tanks - 4 temperature control units LEP 13 – Ammonium Sulfate System: - 1 preparation tank (3,500 L) - 2 storage/distribution tanks - Solid material crusher - Dosing & neutralization system - Heat-traced pipes Media Distribution: - 1 pharmaceutical NaOH 1M system - 1 technical NaOH 32% system - 1 acetic acid 60% system - Pump and dosing stations Additional Process Tanks: - >15 stainless steel tanks 316L (1,000–9,000 L) - Various skids, distribution and instrumentation units GMP & DOCUMENTATION - URS / requirement specifications per LEP - P&ID diagrams - Layout and sectional drawings - EMSR & instrumentation documentation - FAT documentation - Complete weld certification (digital) - Extensive photo documentation The project documentation is fully available both digitally and additionally physically archived, structured in 316 folders. Process control system connection with pre-configured MES interface is foreseen. Cleanroom integration according to specification. SALE Preferably as a complete system. Modular sale possible if the entire package is not sold. Suitable for plasma fractionators, biopharma manufacturers, CDMOs, or new site establishment projects. Availability: short notice Inspection: by appointment Price: on request

Year of construction: 1988, condition: ready for operation (used), functionality: fully functional, usable tank capacity: 400 l, rotational speed (max.): 3,000 rpm, Process plant for the production of emulsions, creams, ointments, pastes, lotions, suppository masses. The plant consists of the following components: - Heatable stainless steel vessel with double jacket Nlodpfx Asxt E Iqsmysd - Lifting column for hydraulic raising and lowering of the lid - Swiveling control panel - Steel housing with hydraulic and vacuum pump for water circulation - Discharge device for the jacket TECHNICAL DETAILS Usable volume: 400 l Total volume: 480 l Minimum volume: 105 l Mixing unit speeds Anchor scraper agitator (1.5 kW): 20 rpm Toothed colloid mill (5.5 kW): 3,000 rpm Dissolver (5.5 kW): 1,500 rpm Disc diameter: 250 mm Connection diameter: NW 32 mm MACHINE DETAILS Motor power hydraulic pump: 1.1 kW Motor power SIHI vacuum pump: 1.5 kW EQUIPMENT - Thermostats and solenoid valves for temperature control - Fryma type PK 84/25 discharge pump - Sight glass with lighting and wiper - Diaphragm vacuum gauge - Connection for external compressed air supply - Ventilation device - Cleaning wash nozzles

Condition: ready for operation (used), functionality: fully functional, power: 83 kW (112.85 HP), overall weight: 6,000 kg, total length: 460,000 mm, total width: 4,000 mm, total height: 4,300 mm, Year of construction: 2024, operating hours: 300 h, type of input current: three-phase, With shredder, centrifuge, and big bag filling station. Includes spark detection and extinguishing system. Approx. 300 operating hours, year of manufacture 2024. Suitable for stainless steel, nickel alloy, and titanium. Throughput capacity up to 1 ton/hour, depending on material. Total connected load: 83 kW. Overall length: 46 m. Height: 6.2 m. Price on request. Available at short notice. Location: Germany. Nodpfxsq Nmw Io Amyjld

Condition: new, Year of construction: 2025, MAX MAMMUT 400-500-600: High speed log profiling line (up to 600 mm in diameter) for the production of prisms, "river use", "trieste use" beams, boards in general and semi-finished products for pallets. FULLY HYDRAULIC MACHINERY Minimum diameter of logs 120 mm Maximum diameter of logs 600 mm Minimum working length mm 1.800 Maximum working length mm "Infinite" (∞) Tool holder shaft diameter 60-80 mm Nsdohpbthspfx Amyeld Cutter diameter mm 300 Feed speed mt / min. 5 - 70

Condition: new, MOBILE CONCRETE BATCHING PLANT M100-TWN GENERAL Plant Type : MOBILE Concrete Plant with TWIN SHAFT MIXER Plant Capacity : 100m³/hour freshly compressed concrete Mixer Capacity : 3000/2000 lt (2m³ Compressed Concrete) Total Motor Power : 143kw Standard Value can be changed depending on Equipment.. Voltage/Frequency : 380V/50Hz Standard Value. The installation and startup of the plant is under our responsibility. We provide excellent after-sales service. 24/7 SERVICES. REMOTE CONTROL SERVICE. Exporting more than 1000 Concrete Batching Plants to more than 90 Countries all over the world. * HIGHLY EFFICIENT AND DUPLICATE PRODUCTION * EASY TRANSPORTATION * MINUMUM INVESTEMENT FOR FIELD GROUNDWORK * QUICK INSTALLATION Nsdpfx Amowhybdjyeld DETAILS: Crjbtuhm Njflz Hlo Aeb Compacted concrete capacity: 100 m³/h Air Compressor Capacity : 950 lt/min Aggregate Hopper : 4 Bins : 4×11.25 = 45 m³ Mixer Type : TWIN Shaft (2 m³). 3000/2000 lt capacity Mixer Converyor Band : 1000 mm * 13000 mm Weighbridges: Aggregate/ Cement /Water/ Additives

Year of construction: 1989, condition: used, functionality: fully functional, Grain Hopper Railway Wagons for Sale – Models 11-739 and 19-752 Container Flat Wagons for Sale – Models 13-470 and 13-9004 Railway Tank Wagons for Sale – Model 15-1443 SHORT DESCRIPTION Grain Hopper Railway Wagons - A selection of four-axle covered grain hopper railway wagons manufactured between 1976 and 1989. Available models include 11-739 and 19-752, with a tare weight starting from 21.3 tonnes. Wagons are available with either a valid remaining period until the next scheduled repair or an expired scheduled repair interval. Container Flat Wagons - A selection of four-axle container flat wagons, also known as fitting platforms, manufactured between 1980 and 1991. Wagons are available with either a valid remaining period until the next scheduled repair or an expired scheduled repair interval. Buyers can select units according to their preferred model, year and repair status. Railway Tank Wagons for Sale – A selection of used railway tank wagons, model 15-1443, manufactured in 1977 and 1978. Declared tare weight is approximately 22.5 tonnes. Wagons are available with either a valid remaining scheduled repair interval or an expired repair interval. Buyers can select units according to the required year, condition and repair status. FULL DESCRIPTION Main information: • Models: 11-739 and 19-752 • Years of manufacture: 1976 to 1989 • Tare weight: from 21.3 tonnes • Multiple wagons available • Individual selection according to repair status Models: 13-470 and 13-9004 • Years of manufacture: 1980 to 1991 • Declared tare weight: approximately 21.3 to 22.0 tonnes, depending on the individual wagon • Multiple wagons available • Individual selection according to model and repair status Model: 15-1443 • Years of manufacture: 1977 and 1978 • Declared tare weight: approximately 22.5 tonnes • Multiple wagons available • Individual selection according to technical condition and repair status The available fleet includes: • Wagons with a valid remaining period until the next scheduled repair • Wagons whose scheduled repair interval has expired and which require scheduled workshop repair before further operation Buyers can select wagons according to their preferred model, year of manufacture, technical condition and repair status. The exact model, manufacturing year, repair history and technical condition vary between individual wagons. Detailed wagon lists, identification numbers, photographs, available documentation and commercial terms can be provided on request. Nodpfjzmtufsx Amyjld Price on request.

Condition: repair required (used), functionality: unexamined, Year of construction: 1990, overall weight: 92,000 kg, load capacity: 20,000 kg, working height: 8,500 mm, Equipment: documentation/manual, Two rail-mounted electric container gantry cranes are offered for sale from an industrial site in Riga, Latvia. The cranes were designed for loading, unloading, transferring and stacking ISO 1C and 1CC containers. Their 20,000 kg rated lifting capacity, 25 m span and powered travelling trolley make them suitable for container terminals, railway yards, ports, logistics hubs and industrial storage areas. The cranes were manufactured in 1990 by KRAN / Uzlovsky Machine-Building Plant in the Tula region. The factory type designation is 20-25-8.5-5. Two units are available. EQUIPMENT AND DOCUMENTATION Rail-mounted gantry structure with electrically driven crane travel mechanism. Nedpfxjzmtcij Amyold Powered travelling trolley and main hoisting mechanism. Operator cabin control. The factory passport specifies a rotating 20 t container spreader for ISO 1C and 1CC containers; A technical passport for factory no. 029 is available in Latvian and Russian, including historical inspection and repair entries. Further technical information and detailed photographs can be provided on request.

Condition: new, functionality: fully functional, power: 450 kW (611.83 HP), fuel type: electric, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO MCK-115 is the biggest model of MCK series, those are a mobile type & closed circuit crushing and screening plants that is used for processing of hard materials such as basalt, granite, gabbro, dolomite and other types of hard stones. MCK-115 includes two stages of crushing process which is made by primary jaw crusher and secondary cone crusher. TECHNICAL SPECIFICATIONS: - Bunker: 35 m3 - Plant Dimensions (1st chassis): 13000x4700x4400 mm - Second chassis: 19620x4619x4364 mm - Production Capacity: 180-300 Tons Per Hour - 1st Crusher: Jaw Crusher – 1100x850 mm - 2nd Crusher: Cone Crusher – FABO CC 300 Nedpszl N Tbjfx Amyjld - Maximum Feeding Size: 800 mm - Vibrating Screen Size and Deck: 2200x5000mm 3-4 decks - Total Motor Power: 450 Kw - Generator (optional): 600 kvA MCK-115 IS A COMBINATION OF: • Bunker(Hopper) • Vibrating Grizzly Feeder (bypass) • Primary Jaw Crusher • Cone Crusher • High Stroke Type Vibrating Screen • Folding type feeding, feedback, bypass and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Dust Suppression System • Easy walking platforms for maintenance • Diesel Generator (Optional) FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, functionality: fully functional, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE COMPACT series Stationary Concrete Batching Plants provide satisfaction of all levels need with practical and effective solutions. Stationary concrete batching plants can easily and efficiently reach high capacity production of homogeneous concrete mixture. COMPACT series have easy operating system and lowest investment costs. In addition, the plant provides the use of enterprise resources accurately, so that gaining time-saving will transform to more earnings. . TECHNICAL SPECIFICATIONS: Model: COMPACT 160 Production capacity: 160 m3 Mixer type: Twinshaft – 4.5 m3 Aggragate bunker: 4x30 m3 Cement weighing: 2000 kg Additives weighing: 2x50 kg Water weighing: 1000 lt Cement silo is optional. COMPACT 160 consist of: • Aggregate Storage Hopper • Aggregate Weighing Hopper • Aggregate Transfer Conveyor or Bucket System • Twinshaft Mixer • Mixer Chassis, Walking Platforms, Ladder • Water Weighing Hopper • Cement Weighing Hopper • Admixture Weighing Hopper • Air Compressor • Cement Screw Conveyor • Bolted Cement Silo • Top Filter, Safety Valve and Accessories • Control Cabinnet • PC and Automation System Nedpfxjzl Np Ns Amysld • Control and Power Panel FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: good (used), Year of construction: 2019, machine/vehicle number: N500003, Manufacturer: DJM Nlodpfxey Ia U Rs Amyed Model: COEX 4 Year: 2019 Condition: Used Serial Number: N500003 Stock Number: 3365 Diaphragm: 4 pieces Capacity: up to 100 strokes/min. Product diameter: max. 60 mm Product temperature: -2 °C to +45 °C Belt width: 440 mm Belt length: 1920 mm Belt speed: 3 - 15 m/min. Power: 3 x 400V, 50Hz, 20kW Dimensions: 2030 x 1625 x 2281 mm Weight: 2500

Condition: excellent (used), Ref: MM6323 ROKK Processing Ltd continuous freezer supplied with control unit. Manufacturer: ROKK Processing Ltd. Model - RFE 300. Date of manufacture - 2024. Njdpfx Aoydlg Asmyold Freon gas - R404A. Ideal for use in small laboratories up to large factories. Limited use over the 16 months since installation. Control unit: 1 x ROKK Processing Ltd Control Unit. Manufacturer: ROKK Processing Ltd Model: SP40BC Capacity - 100 to 300 liters per hour Calibrated to BRC standard 3 Phase power Fixed and flexi hose dispensing options Pipes for connection to pasteuriser included Various spare parts included Overall dimensions - 1100mm long x 730mm wide x 1620mm high. Weight - 550 kg. The spray arm at the top of the machine (blue) can be detached for shipping.

Condition: new, functionality: fully functional, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO MCK-110 is the biggest model of MCK series, those are a mobile type & closed circuit crushing and screening plants that is used for processing of hard materials such as basalt, granite, gabbro, dolomite and other types of hard stones. MCK-110 includes two stages of crushing process which is made by primary jaw crusher and Secondary impact crusher. Nljdpfx Amozi T Udeyjd TECHNICAL SPECIFICATIONS: - Bunker: 35 m3 - Plant Dimensions (1st chassis): 13000x4700x4400 mm - Second chassis: 17500x47000x4600 mm - Production Capacity: 180-300 Tons Per Hour - 1st Crusher: Jaw Crusher – 1100x850 mm - 2nd Crusher: Secondary Impact Crusher – 1120x1500 mm - Maximum Feeding Size: 800 mm - Vibrating Screen Size and Deck: 2200x5000mm 3-4 decks - Total Motor Power: 500 Kw - Generator (optional): 660 kvA MCK-110 IS A COMBINATION OF: • Bunker(Hopper) • Vibrating Grizzly Feeder (bypass) • Primary Jaw Crusher • Secondary Impact Crusher • High Stroke Type Vibrating Screen • Folding type feeding, feedback, bypass and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Dust Suppression System • Easy walking platforms for maintenance • Diesel Generator (Optional) FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, functionality: fully functional, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE TECHNICAL SPECIFICATIONS: -Production Capacity: 250-350 Tons Per Hour -Crusher Type & Size: Secondary Impact Crusher – 1120x1500mm -Maximum Feeding Size: 450 mm Nodpfx Amezi T Nzsyeld -Vibrating Screen Size and Deck: 2200x5000mm 3-4 decks -Total Motor Power: 297 kW MDMK-03 is a combination of: • Secondary Impact Crusher • High Stroke Type Vibrating Screen • Folding type feeding, feedback, bypass and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Dust Suppression System • Easy walking platforms for maintenance • Diesel Generator (Optional) FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, functionality: fully functional, power: 450 kW (611.83 HP), fuel type: electric, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Njdpfx Amozi Tzwsyeld FABO MCK-115 is the biggest model of MCK series, those are a mobile type & closed circuit crushing and screening plants that is used for processing of hard materials such as basalt, granite, gabbro, dolomite and other types of hard stones. MCK-115 includes two stages of crushing process which is made by primary jaw crusher and secondary cone crusher. TECHNICAL SPECIFICATIONS: - Bunker: 35 m3 - Plant Dimensions (1st chassis): 13000x4700x4400 mm - Second chassis: 19620x4619x4364 mm - Production Capacity: 180-300 Tons Per Hour - 1st Crusher: Jaw Crusher – 1100x850 mm - 2nd Crusher: Cone Crusher – FABO CC 300 - Maximum Feeding Size: 800 mm - Vibrating Screen Size and Deck: 2200x5000mm 3-4 decks - Total Motor Power: 450 Kw - Generator (optional): 600 kvA MCK-115 IS A COMBINATION OF: • Bunker(Hopper) • Vibrating Grizzly Feeder (bypass) • Primary Jaw Crusher • Cone Crusher • High Stroke Type Vibrating Screen • Folding type feeding, feedback, bypass and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Dust Suppression System • Easy walking platforms for maintenance • Diesel Generator (Optional) FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, functionality: fully functional, fuel type: hybrid, Year of construction: 2026, The FABO FTJ-12-85 Mobile Jaw Crusher is a heavy-duty tracked crushing plant engineered for primary crushing in quarrying, mining, and recycling applications. Featuring a powerful 1200 × 870 mm jaw crusher, it delivers high production capacity, excellent reduction ratios, and reliable performance, even in the most demanding conditions. Equipped with a PLC automation system, variable-speed grizzly feeder, and diesel-electric power unit, the FTJ-12-85 offers efficient operation, low fuel consumption, and easy maintenance. Its robust tracked chassis ensures maximum mobility, making it the ideal solution for high-capacity crushing projects. Nljdpfxozibcvs Amyod Production Capacity: 200–300 T/H Maximum Feed Size: 800 mm Crusher Opening: 1200 × 870 mm Drive System: Diesel-Electric FABO – Quality Is Our Soul.

Condition: new, functionality: fully functional, fuel type: hybrid, color: other, Year of construction: 2026, The FABO FTV-90-S Mobile Vertical Shaft Impact Crushing & Screening Plant is a tracked solution designed for the production of high-quality aggregates and manufactured sand. Combining crushing and screening in a single unit, it delivers high efficiency while reducing operating costs. Crusher Type: Vertical Shaft Crusher Rotor Diameter: Ø 900 mm Production Capacity: 120-220 Ton/Hour Nsdpfx Aszh I Icomyeld Maximum Feeding: 50 mm Vibrating Screen Size: 1500x4200 m Equipped with a Vertical Shaft Impact (VSI) Crusher, vibrating screen, and PLC-based automation system, the FTV-90-S ensures consistent product quality, reliable performance, and easy operation. Its tracked chassis provides excellent mobility, allowing quick relocation and fast installation on different job sites. The hybrid power system also offers flexible operation using either diesel or electric power.

Condition: new, functionality: fully functional, fuel type: hybrid, color: original, overall weight: 55,000 kg, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Fabo tracked jaw crusher FTJ 11-75 is a complete mobile system which moves on hydraulically driven tracked system with 1 km/h speeds and combination of a vibrated grizzly feeder, 1070x760 mm jaw crusher, foldable stockpile conveyors, control unit and electric generator. In today's conditions and technological processes, businesses are beginning to think about how to make their field of activity more efficient. As they make it more efficient, they always take into consideration factors such as the operationally of the machines they use, their low cost and staffing needs. Our Tracked Crushers can crush with high performance even on the most demanding mine sites with its specially designed body and compact structure. Customization can be done to our tracked systems by Jaw Crusher, Primary and Secondary Impact or Cone Crusher. All necessary equipment for the process is combined only single chassis and processing equipment is driven by electrical motors. Overall production capacity is 150-300 tph Advantages of Tracked Crushers; -Heavy-duty walking tracks can reach places where ordinary machines cannot reach. -It has the appropriate dimensions and sound level to crush construction waste in the city. -The fuel consumption of the generator and the travel track units is highly economical. -System maintenance and management is very easy with latest technology control software. TECHNICAL SPECIFICATIONS: -Model: FTJ 11-75 -Production Capacity: 150 – 300 tons per hour -Maximum Feeding: 700 mm -Crusher Type: Jaw Crusher -SIZE: 1070x760 mm -Generator: 300 kva -CSS Setting: 45 – 160 mm -Weight: 55000 tons -Dimensions: 2900x3500x14.500mm – Low investment and operation cost – Zero substructure preparation – Easiness at usage and maintenance – Easy assembly and disassembly advantages. Nedpezhuz Njfx Amyeld FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!