Used Pneumatic-Hydraulic Riveting Tool for sale (52,286)

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 2 h, functionality: fully functional, machine/vehicle number: L030748, overall weight: 2 kg, warranty duration: 3 months, pressure: 7 bar, The Scell-it® E-312NP pneumatic riveting tool for self-clinching nuts offers reliability, precision, and functionality, making the installation of self-clinching nuts quick and easy. Below, we provide additional information regarding the replacement of the nose/mandrel, stroke adjustment, and self-clinching nut installation, to enable you to fully utilize the potential of this tool. Nose/Mandrel Replacement: Detailed instructions for replacing the nose and mandrel can be found in our comprehensive operating manual. If you intend to use self-clinching nuts of different diameters, it will be necessary to change the nose, mandrel, and adjust the tool accordingly. Consult the instructions to learn how to make these changes and adjust the mandrel length to the size of the self-clinching nut. Self-Clinching Nut Installation: After performing the startup procedures and adjusting the stroke, insert the self-clinching nut into the pre-drilled hole. Place the mandrel in the self-clinching nut and press the tool. The mandrel will automatically seat itself in the self-clinching nut. Press the tool trigger to clamp the self-clinching nut onto the component. The release will occur automatically after the self-clinching nut has been clamped onto the component, allowing you to release the tool. If the tool is not released from the self-clinching nut, press the button on the back of the tool to force the release. Stroke Adjustment: Laedpfx Amjzc Dx Ievoc The tool stroke must be adjusted to the component on which the self-clinching nut will be clamped. The E-312NP riveting tool allows stroke adjustment from 1 mm to 7 mm. To adjust it, follow the instructions below: Precise stroke adjustment is crucial for effective self-clinching nut installation. Here are some tips for controlling stroke adjustment: The stroke can be set from 1 mm to 7 mm. The graduated scale on the tool accurately indicates the set stroke. To increase the stroke, move the adjustment slider towards the front of the tool, while simultaneously turning the knob to the left. Then release the slider, ensuring that it is re-seated on the head. The cursor will indicate the range of the set stroke. To decrease the stroke, follow the same procedure, turning the stroke adjustment knob to the right. Our self-clinching nut riveting tool is designed to allow precise stroke adjustment and ensure optimal installation results. If the stroke is incorrectly adjusted or the self-clinching nut has a quality defect, the mandrel release may be difficult. In this case, use the "anti-block rod," which is included in the kit. Insert it into the hole in the base of the sleeve and turn it to the right to release the self-clinching nut, as shown in the illustration in the manual.

Condition: excellent (used), Sell Hurst hydraulic rescue tool kit Laedevgnudjpfx Amvoc - Hydraulic shears. - Arm spreader. - Hydraulic pump.

Condition: excellent (used), I sell a set of hydraulic tools for rescue Weber- Hydraulic. Lsdpfovgnhwex Amveac - Hydraulic shears. - Arm spreader. - Hydraulic pump.

Condition: excellent (used), Offering a professional CEMBRE B35-50D battery hydraulic crimping tool – a high-quality tool for industrial applications. The device is in very good technical condition, fully operational, and ready for work. ⚙️ Technical specifications: Model: CEMBRE B35-50D Crimping force: 35 kN (4 tons) Max cable cross-section: up to 150 mm² (copper) Power supply: 9.6V Ni-MH battery Rotating head: 180° Type: hydraulic, battery-powered Operation: one-handed ✅ Applications: cable lugs Lasdpfxjy H Ri Aj Amvsc cable connectors LV electrical / industrial installations service and maintenance 📦 Set includes: CEMBRE B35-50D crimping tool 2x batteries charger carrying case documentation / manual shoulder strap ⭐ Advantages: Very robust industrial construction Quiet operation and minimal vibrations automatic return after crimping high precision and repeatability convenient one-handed operation 📌 Condition: Used – shows normal signs of use, fully operational technically.

Condition: used, We are offering this used GESIPA FireFox 2 F axial pneumatic-hydraulic riveting tool, year of manufacture unknown, for sale. Manufacturer: Gesipa Blindniettechnik GmbH & Co. KG Type: FireFox 2 F axial Maximum operating pressure: 6.0 bar Serial number: If you have any questions or require further information, please do not hesitate to contact us. Laodpfozfg Suex Amvjc

Condition: used, functionality: fully functional, We are offering this used GESIPA FireFox 2, pneumatically and hydraulically powered, with an unknown year of manufacture. Manufacturer: GESIPA Model: FireFox 2 Drive type: pneumatically and hydraulically powered If you have any questions or require further information, please feel free to send us a message or call us. Ledpfx Amjzfg Ngjvoac

Condition: used, input voltage: 230 V, control voltage: 14 V, We are offering this used Gesipa FireBird GESIPA FireBird cordless blind rivet nut setter, year of manufacture unknown, for sale. Battery voltage: 14.4 V Charger mains voltage: 230 V Battery type: Li-Ion Ljdpfxozfg H Sj Amvoac If you have any questions or require further information, please send us a message or call us.

Condition: used, We are offering this Gesipa FireBird Pro GESIPA FireBird Pro cordless blind rivet nut tool, year of manufacture unknown. If you have any questions or require further information, please feel free to send us a message or call us. Ledpjzfg Hlofx Amvoac

Condition: used, We are offering this used Gesipa FireBird for sale; the year of manufacture is unknown. Ljdpfxjzfg Ayj Amvsac If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: excellent (used), For sale: professional, battery-powered hydraulic crimping tool, Cembre brand, model B15D. The devices are in perfect working order and ready for use. The price is for one unit. The visual condition is as shown in the photos – normal signs of wear and tear from use. Technical specifications: Manufacturer: Cembre Model: B15D Crimping force: 15 kN Power supply: 9.6V / 2.0Ah Ni-MH Professional tool for crimping terminals and connectors Compact and robust design Additional information: Lajdpsy Uzcvsfx Amvoc Batteries have been refurbished – expiry date 05.2026 Charger not included Crimping tools are 100% functional Sold individually Included in the set: Cembre B15D crimping tool Battery

Condition: excellent (used), For sale: a professional, battery-powered hydraulic crimping tool from Cembre, model B15MD. The device is in perfect working order and ready for use. Sold without battery and charger. Excellent cosmetic condition, with normal signs of use visible in the photos. The set includes the original Cembre transport case and the items shown in the photos. Technical data: Manufacturer: Cembre Model: B15MD Crimping force: 15 kN Power supply: 18V battery Made in Italy Compact and lightweight design Professional tool for crimping terminals and connectors Included in the set: Cembre B15MD crimping tool Lasdey Uy Nhjpfx Amvjc Original transport case Accessories shown in the photos NOTE: Sold without battery and charger. The device has been tested and is functioning at 100%.

Condition: excellent (used), Professional hydraulic set from the renowned manufacturer HURST / Hale Fire Pump Co., used in technical rescue applications (fire brigade, rescue services). ——— Condition: Laedpfx Amjyxr Dxsvoc Used, fully operational, and tested equipment Shows normal signs of use as seen in the photos Technically in good condition – ready for work ——— Technical specifications: • Model: SP 45 • Manufacturer: Hale Fire Pump Co. / HURST • Year of manufacture: 1992 • Operating pressure: 350 BAR • Power supply: 230V (single-phase) • Standard: DIN 14751 ——— Set includes: • HURST hydraulic pump • Hydraulic shears • Spreader • Hydraulic hoses (2 pcs.) • Cable drum • Set of quick couplings • Transport frame ——— Applications: • Road rescue • Technical work and demolition • Rescue services / Volunteer / Professional fire brigades • Industry (spreading, cutting) ——— Advantages: • Robust, professional construction • High cutting and spreading force • Proven HURST technology • Complete set – ready for immediate use

Condition: used, Pneumohydraulic cylinder TOX Pressotechnik Hydro-pneumatic press, power pack Type: S 04.00.050.12 D No.: 208696.460 Year of manufacture approx. 2000 Pressure capacity: 4.0 tons at 10 bar Pressure capacity: 3.0 tons at 8 bar Pressure capacity: 2.6 tons at 7 bar Pressure capacity: 2.4 tons at 6 bar Pressure capacity: 2.0 ton. at 5 bar Pressure capacity: 1.6 ton. at 4 bar Pressure capacity: 1.2 tons at 3 bar Total stroke: 50 mm Power stroke: 12 mm Piston rod: Ø 30 mm Thread for piston rod: M22 x 2 mm Compressed air requirement: 3 to 10 bar - Electronic oil pressure switch with TOX digital display for force measurement, type 167282 Laedpfx Ameu D Tz Usvoc - Height only power pack with piston rod = 610 mm - Height of power pack hydropneumatic cylinder only = 560 mm - Additional base plate 160 x 160 x 20 mm - Plunger plate: Ø 68 mm Space requirement L x W x H: 160 x 160 x 660 mm Weight: 21 kg Very good condition 3 pieces available, price per piece

Condition: used, Hydraulic Synchronizing Press, Spotting Press AGEO Type GHP 200 H6 4-Column Hydraulic Press, Tool Trial Press, Spotting Press Serial No. 21169 Year of manufacture: 1993 Pressing force: 200 tons Clearance between uprights (front): 1200 mm Upright opening (side): 650 mm Table surface: 1560 x 1010 mm Ram surface: 1560 x 1010 mm Ram stroke: 575 mm Draw cushion stroke: 300 mm Draw cushion holding force: 63 tons Draw cushion ejector force: 30 tons Max. installation height: 775 mm Table height above floor: 1000 mm Guide column Ø: 140 mm Clamping pin bore in ram: 64 mm Pressing speed: 0 to 10 mm/s, stepless Return speed: 0 to 20 mm/s, stepless Main motor power: 22 kW Control pump motor power: 5.5 kW Connection: 400 Volts, 50 Hz - Table and ram with 22 mm T-slots - Two pressure cylinders with electronic precision synchronization control - Stepless electronic stroke limitation (top and bottom with digital travel measurement and position display) - Mechanical safety support device (prevents ram from dropping due to dead weight) - Single-hand and two-hand operation - Electrical tool safety via signal contact - Pressure presetting independent of stroke (via keypad, digital pressure display) - Travel measurement system right and left via rotary encoders - Electrical control: MS-DOS PC with Ageo H v2.23 control software - Operator panel with swiveling display - Stroke movement and press force adjustable via joystick - Adjacent hydraulic power unit with electrical cabinet - Hydraulic draw cushion under the press table - Draw cushion with ejector function - Continuous stroke control - Floor-level installation - Electrical oil temperature monitoring - Operating manual with circuit diagrams Space required by press (upright) L x W x H: 1800 x 1010 x 3470 mm Space required for horizontal transport L x W x H: 3500 x 1800 x 1200 mm Net weight press: 13 tons Space for hydraulic power unit L x W x H: 1000 x 800 x 3040 mm Net weight hydraulic power unit: approx. 1 ton Ledpfx Aowva I Homvjac The machine was used as a tool trial press in a toolmaking workshop. Very good condition.

Condition: used, Double-column hydraulic press, SMG Type HBP 200 - 2000 / 2000 Manufacturer's No. 7.4117, Year of manufacture 1986 - Refurbished 2000 Clamping force 200 tons Column width at the front 2050 mm Column opening on the side 2030 mm Table surface 2800 x 2000 mm Ram surface 2000 x 2000 mm Ram stroke 700 mm Installation height max. 1850 mm Table height above floor 750 mm Ram retraction force 33 tons Rapid traverse speed 500 mm/s Ledpfxjdzp Tcs Amvsac Pressing speed 72/36 mm/s Return stroke speed 420 mm/s Safety clearance 230 mm Main motor power 75 kW Control pump motor power 11 kW Power supply 380 Volt, 50 Hz - 8-fold flat guide for the ram - Clamping plate with 22 mm T-slots on the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking in the top dead center position - Linear encoder system with glass scale - Electrical control system renewed in 2000 with SIEMENS PLC S7 - Adjacent control cabinet - 2-hand control panel adjacent - Floor-level installation - Central lubrication - Operating manual with wiring diagrams Space required for the press in upright position L x W x H 3700 x 2900 x 5900 mm Machine height complete with motor 5900 mm Space required for horizontal transport L x W x H 5900 x 3250 x 2950 mm Weight 38 tons The machine was used as a production press at Volkswagen until 2000. From 2000, the machine was used as a tool try-out press in a toolmaking company. Good condition.

Condition: excellent (used), I sell a set of hydraulic tools for rescue Weber- Hydraulic. - Hydraulic shears. - Arm spreader. - Hydraulic pump. Ledovgnttspfx Amveac

Condition: new, Year of construction: 2026, Technical data Swing over bed 360 mm Swing over cross slide 150 mm Maximum turning length 750 mm Spindle speed 100–2000 rpm Spindle bore Ø 51 mm Spindle taper A2-6 Tailstock spindle taper MT5 Number of tools in the holder 8 Tools size 20×20 Tailstock spindle feed 100 mm Main motor power 3.7 kW Dimensions 1815×1300×1600 mm Weight 1300 kg Laodpfx Ameizw E Ajvoc Available equipment SINUMERIK 808D control system in Polish and English SIEMENS servomotors 1 live tool 3-jaw hydraulic chuck 8-position turret head soft jaw kit hydraulic tailstock cooling system automatic gear and guide lubrication system 24V halogen lighting Polish and English manuals EC declaration The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: excellent (used), Year of construction: 1998, AMADA MODEL GPN 630 HYDRAULIC SHEAR PNEUMATIC REA SHEET SUPPORTS ELECTRONIC REAR SAFETY GUARD Max. cutting width: 3050 mm Max. cutting capacity for steel: 0.4 - 6.0 mm Max. cutting capacity for stainless steel: 4.0 mm Max. cutting capacity for aluminium: 8.0 mm Adjustable back gauge: 1050 mm NC control Cutting gap adjustment via control Cutting angle adjustment via control: 0.4 – 2.2° Sheet holding function Strokes per minute: 33 cuts Motor power: 5.5 kW Dimensions (L x W x H): approx. 3800 x 2300 x 1950 mm Weight: approx. 6.5 tons STANDARD EQUIPMENT PROGRAMMABLE MOTORISED BACK GAUGE 2.0 METRE SIDE GAUGE 1.5 METRE FRONT SUPPORTS SHADOW LINE LIGHT AUTOMATIC HYDRAULIC HOLD DOWN CLAMPS CENTRALISED LUBRICATION Ledsyypb Rspfx Amveac FOOTSWITCH SHADOW LIGHT BEAM CYCLE COUNTER BLADE GAP AND RAKE ANGLE ADJUSTMENT ONE SET OF BLADES 4 CUTTING EDGES ADJUSTABLE STROKE PNEUMATIC SHEET SUPPORTS HOUR COUNTER AUTO-DIAGNOSTICS

Condition: used, diameter of piston 0 0 stroke length max. 0 0 2 boards with hydraulic and pneumatic spareparts from Rexroth, Parker, Vickers, Festo, Wabco and Orsta! Without board, only sparepars! partially unused! Laodped Ig Uvsfx Amvoc Detailed pictures can be supplied.

Condition: good (used), Clamping devices, clamping jaws, deep clamping jaws, clamping supports, clamping tools Quantity: 4 pieces -Clamping height: 95 mm Price: for 4 pieces -Weight: 10 kg Lasdpsb A Hf Asfx Amvsc

Condition: used, Single-column pneumatic press, hydraulic press PAUL ANTON type PVT 2 Pneumatic table press, embossing press No. 97148 Year of manufacture approx. 1980 Compressive force: 10 ton throat depth: 100 mm Ram stroke: approx. 25 mm Plunger surface: Ø 32 mm Table size: 250 x 220 mm Lajdjtrpiiepfx Amvec Table opening: 53 x 53 mm Table height: 1060 mm Installation height: 155 mm - Very stable construction - Hydro-pneumatic press with air to oil pressure ratio - Pneumatic foot switch - ram with M12 internal thread - Metal base Space requirement L x W x H 850 x 620 x 1560 mm Weight approx. 200 kg good condition

Condition: used, Hydro-pneumatic machine vice HILMA - ROEMHELD Type SMPH 125 Jaw width: 125 mm Jaw height: 45 mm Clamping force: 3 tons at 7 bar Clamping force: 2 tons at 5 bar Clamping range: 0 to 210 mm Laodpfx Amexw Rdfevsc Maximum opening: 214 mm Guideway height: 67 mm - Hydro-pneumatic force amplifier - 3 clamping ranges adjustable via positioning pin from 0 to 214 mm Dimensions (L x W x H): 550 x 260 x 135 mm Net weight: 33 kg in good condition

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 00026, overall weight: 400 kg, Specifications: Ljdpswrp Iujfx Amveac 8 bar 24 V 80 kN 3 K 150 E The Arnold & Shinjo / Multipower Farger & Joosten C-Press is a powerful and versatile hydropneumatic riveting press, ideal for efficient and precise joining of components. Thanks to its robust design and reliable hydraulic technology, it allows for high force transmission in various riveting tasks, making it a valuable solution in manufacturing and assembly. The press stands out for its ease of use and flexibility, so it can be used in different production processes.

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: ITJ291580, power: 15 kW (20.39 HP), Equipment: compressed air system, compressor, type plate available, The Chicago Pneumatic CPVSD20 UL compressor is a 15 kW lubricated industrial unit, ideal for various applications requiring a working pressure of up to 10 bar. Although it is a used unit, this device is designed to deliver reliable and long-lasting performance in a demanding industrial environment. Chicago Pneumatic compressors are known for their energy efficiency and their ability to adapt to fluctuating compressed air needs, thanks to their advanced control system. The CPVSD20 UL model, in particular, offers an excellent balance between power and economy, making it a wise choice for users seeking to combine performance and reduced operating costs. Lajdezfzagepfx Amvsc By choosing this compressor, you benefit from a robust and proven machine, ready to be integrated into your production line or used in specific applications requiring constant pressure. It is an investment that goes hand in hand with reliability and quality, thereby ensuring uninterrupted operation for your industrial processes.

Condition: excellent (used), For sale, Form thermostat - Tool Temp TT-188 Max. heating temperature - 90°C Medium - water Power: 9850 Watts The device has: - vacuum pump vaccum Laodpfovzb Nqjx Amvec - vacuum tank - function of sucking the medium out of the mold - the device can be integrated with the machine, maintenance-free