Used Pietribiasi Michelangelo Srl Continuous Pasteurizer for sale (6,996)

Year of construction: 2022, condition: ready for operation (used), An unused and still originally packaged continuous pasteurizer Pietribiasi Michelangelo Srl is available. Throughput capacity milk: 1500l/h, throughput capacity cream max. 40% fat: 750l/h, inlet temperature: 6°C, pasteurization at 68/74/88°C, outlet temperature: 6°C, capacity foreflow tank-balance tank: 100l. With centrifugal pump for product and cleaning, additional section and hot water group, plate heat exchanger with stable internal construction in AISI304, special heat exchanger plates Sondex Denmark in AISI316, surface area per plate: 0.08m², flow volume per plate: 0.21dm³, special gaskets made of nitrile snap-on without glue, hydraulic test pressure: 8.0bar, test temperature: 110°C, heat recovery: 85%, temperature profile 6-68/74/88-6/33/45°C - 4 sections, final heating outlet cheese/yogurt: 33/45°C, media: approx. 3000+3000l/h hot water 92°C, approx. 3000l/h cooling water 2°C, holding tube for 15s, design stainless steel AISI304, switching system for product to the foreflow tank by means of pneumatic changeover valve as soon as the heating temperature is approx. 2°C below the setpoint, 2x hot water generators for pasteurization and final heating, closed circuit, assembly for automatic water supply, automatic system for hot water supply, expansion vessel, pump, brazed plate heat exchanger. Documentation available. An inspection on site is possible. Lsdpfeyln D Tjx Ancsaa

Year of construction: 2026, condition: new, Continuous pasteurizer electric with preheating of the juice in the coaxial tube heat exchanger They use available low-cost energy (e.g. from solar, heat pump, biogas, tec.) although the temperature level is not sufficient for pasteurization. The rest of the temperature increase to pasteurization level is done electrically (with less energy requirement). The components: Preheating: * Coaxial tubular heat exchanger (KRWT) with thermal insulation (max. 60kW) thermal * Mixing unit incl. circulation pump ensures a stable inlet temperature of the heating water Continuous pasteurizer electric: * Electric heater 13.5 / 18 / 27 / 31.5 kW - 400 V * Tank (stainless steel) 150 ltr. with thermal insulation with stainless steel tubular heat exchanger * Automatic low temperature safety device (compressed air required) * Stainless steel juice pump Pasteurizer mounted on chassis Simple operation Total capacity up to 1100 liters per hour ##### Lodpsuadm Dsfx Anceaa RINK - Pasteurizers for more than 30 years Proven technology - more than 500 units in customer use

Year of construction: 2026, condition: new, Continuous pasteurizer electric - up to 400 ltr./h * Water bath boiler * Electric heating 13.5 / 18 / 27 / 31.5 kW - 400 V * Container (stainless steel) 150 ltr. with thermal insulation * Stainless steel tubular heat exchanger * Automatic low temperature safety device (compressed air required) Lasdst Uzitopfx Ancsa * Stainless steel juice pump * Chassis with holder for low temperature safety device and pump ##### RINK - Pasteurizers for more than 30 years Proven technology - more than 500 units in customer use

Condition: like new (used), THE FUNCTION OF THE PASTEURIZER-COOLER IS TO PASTEURIZE THE PRODUCT DURING THE INITIAL PHASE OF THE PROCESS, AND THEN TO GRADUALLY COOL IT THROUGHOUT THE REMAINDER OF THE PROCESS. THE MACHINE INCLUDES: - 3 BASINS AND 3 CENTRIFUGAL PUMPS: Useful dimensions: - Basin 1: 2.44 m x 1.35 m x 0.53 m - Basin 2: 2.32 m x 1.35 m x 0.53 m - Basin 3: 2.32 m x 1.35 m x 0.53 m - Modular belt infeed conveyor: 5.20 m (length) - Modular belt outfeed conveyor: 4.35 m (length). Laodpfx Anjx S Hpcscsa

Condition: new, functionality: fully functional, machine/vehicle number: ST2100-001, overall weight: 450 kg, Year of construction: 2021, STEMA GLF Dowel Shooter Automatic Certainly the most productive dowel inserting machine for heavy and long dowels. Pre-installed for dowels, 80 x 8 mm, as commonly used in window manufacturing. Please refer to the detailed description in the attached PDF. The machine is available for demonstration in our showroom and ready for operation. Ledpexhv A Iefx Ancjaa

Year of construction: 2007, condition: excellent (used), machine/vehicle number: WT.010, WPR rewinder Model WTG 700 Year 2007 Fully operational, in very good condition, complete with a set of 10 knives Ljdjy Au A Sjpfx Ancsaa For inquiries, please contact Piotr Żołnierczyk at +48 606 666 023

Condition: like new (used), functionality: fully functional, Year of construction: 2017, operating hours: 48 h, VERTICAL HYDRAULIC BALER MG 50 TVE Vertical hydraulic baler, model MG 50 T.V.E. 1200x1100x3500h, for compacting and baling soft material scraps such as fiberglass mats or similar. Lasdpfoyzr Nmox Ancsa The MG 50 T.V.E. model features a fully enclosed compaction chamber, with both the material loading door and bale extraction door capable of opening. The control panel is mounted on the side of the unit with integrated controls, and is equipped with a 10-meter extension cable to allow for placement away from the baler. The pressing plate is operated by a single cylinder with a 2700 mm stroke and is guided by four lateral sliding rails. Material is loaded from the front. The compaction cycle (press descent and ascent) is automatically activated via push button. - For transportation, the machine is manufactured in three parts: one section is 2000 mm high, one approximately 2300 mm high, and the cylinder, which will be assembled on-site. - Bale tying is preset; it is done manually with the doors open. Via slots in the rear of the chamber, tying can be completed with standard pre-cut wire or strapping. - Bale extraction is carried out by forklift, with special channels at the base for the insertion of fork tines. - The bale extraction door is closed via a handwheel, ensuring safe operation even with elastic materials. A safety microswitch ensures the door is securely closed before pressing. The top loading door features a hydraulic lever closure with machine-mounted controls. - The baler can be placed flush against a wall; only front space is required for material loading and bale removal. - The hydraulic circuit is equipped with an anti-fall safety blocking valve for the press plate. - The machine must be anchored to the floor and is placed above a wash liquid collection tray. • Brand / Model: MG 50 T.V.E. 1200X1100X3500H • Pressing force: 50 tons • Pressing pressure on material: 3.8 kg/cm² • Operating pressure: 220 bar • Bale size: mm 1250 x 1150, variable height (min 800 mm, max 1700 mm) • Bale weight: 400–1000 kg, depending on material • Press chamber: mm 1200 x 1100 x 3500 h • Loading opening: mm 1200 x 1800 h • Compactor stroke: 2700 mm, single cylinder • Operation: Automatic by push button • Cycle time (automatic): 130 seconds • Manual ties: No. 5 • Bale ejection: Removal by forklift • Hydraulic power unit: Integrated into press • Motor power: 10 HP – 7.5 kW • Power supply: 380 Volt – 50 Hz • Overall dimensions: mm 2000 x 3500 x 7150 h • Noise level: 78 dB • Press weight: approx. 5000 kg • Certification: CE Condition: • Used hydraulic baler in excellent condition, sold as seen and approved.

Condition: new, Year of construction: 2024, conveyor belt length: 2,000 mm, conveyor belt width: 350 mm, conveyor belt speed: 33 mm/s, total length: 2,050 mm, total width: 450 mm, total height: 500 mm, overall weight: 50 kg, discharge height: 500 mm, Equipment: documentation/manual, emergency stop, type plate available, NP 2000 - U 350 O 76 mod.NP (BLADE SEPARATOR) STANDARD FRAME Profile type: STANDARD FRAME Drive roller diameter: 76 STANDARD Bottom flat part length: 2000 mm Usable width: 350 (actual width 345 mm) Loading height external: 300–500 mm Belt type: BLACK PVC ROUGH FINISH BELT LATERAL MOTOR Motor: 0.18 kW 4P B14 400V THREE-PHASE 50 Hz 400V THREE-PHASE / RIGHT SIDE Gearbox: RMI40P 1/100 63 B14 (3.3 m/min) Load hopper: 700 x 550 x H. 200 mm GALVANIZED STEEL SUPPORT Support type: WHEELS Lsdeyym Izspfx Ancsaa Control unit: START/STOP switch Control: ON/OFF + emergency button 400V THREE-PHASE 50 Hz on left side

Year of construction: 2021, condition: used, functionality: fully functional, complete 3-stage washing system, entirely made of stainless steel 1st stage: washing with hot water 2nd and 3rd stage: rinsing with cold water Lsdpoyxgppefx Ancoaa workpiece passage height 2100 mm, depth 800 mm

Condition: new, Year of construction: 2026, functionality: fully functional, Your advantages at a glance Modular operating equipment system: Enables quick and clean handling of operating resources. Highest protection class IP55: Dust and splash-water protected, ideal for demanding production environments. Maintenance-friendly: Easy maintenance due to the modular print head and a single, long-lasting filter element. Intuitive operation: Large 10-inch touchscreen display for simple setup and handling. Printing of up to 5 lines with various fonts and flexibly controllable data sources. Lasdswpr I Ejpfx Ancsa Efficiency and sustainability: Low solvent consumption and durable components sustainably lower operating costs. The continuous inkjets are particularly suitable for industries such as cosmetics, dietary supplements, food and beverage production, pet food, chemicals, as well as logistics and packaging. Thanks to the robust construction and flexible printing options, the devices can be individually adapted. Easy integration into your system.

Condition: used, Year of construction: 2010, operating hours: 15,000 h, machine/vehicle number: M312, Technical Specifications and Performance Data Laedjygh I Uspfx Ancsa This pre-owned monoblock is manufactured by Omar and integrates drying, capsule application, and self-adhesive labeling functions into a compact rotary system designed for professional beverage production. The machine is equipped with a double capsule applicator with rotating heads for precise capsule application and three self-adhesive labeling units for front, back, and neck labels. It is ideal for presenting high-quality wines and can be integrated into a used bottling line or as a stand-alone module in an industrial packaging environment. Manufacturer: Omar Model: Simphony Washer-Dryer Year: 2010 Configuration: Drying module + double capsuling unit with rolling heads + 3 self-adhesive labeling stations (front/back/neck) Bottle Formats: Compatible with Bordeaux and Burgundy bottles Label Application: Pressure-sensitive (self-adhesive) for front, back, and neck Container Type: Glass bottles Format Examples: Reference capacity 0.5 L Application: Suitable for integration into beverage production lines and industrial filling Advanced Automation and Control Systems The monoblock is designed for synchronized operation of the drying, capsuling, and labeling units. The self-adhesive labeling stations ensure precise application with fine adjustment for front, back, and neck labels. The double capsuling stations with rolling heads ensure consistent finishing quality on wine capsuling units. Rapid mechanical adjustments support the changeover from Bordeaux to Burgundy bottles, improving production flexibility in existing bottling lines. Production Line Integration Capability Designed for in-line operation, the unit interfaces upstream with fillers and capping/closing machines and downstream with inspection and packaging equipment. It adapts to standard conveyor logistics, enabling smooth transfer of glass bottles. Format changes between compatible wine bottle geometries are supported, making the machine suitable for multi-SKU beverage production. Machine Condition and Maintenance History The machine has undergone a thorough restoration, which included purchase, transport, and recommissioning, resulting in a fully functional and reliable second-hand asset. It is ready for use in a production setting, suitable for rapid integration into an existing bottling line. Operational Performance and Versatility Optimized for glass wine bottles, the monoblock combines drying, precise capsule application with rolling heads, and three-point self-adhesive labeling. This configuration supports premium packaging standards and is suitable for wineries and beverage producers seeking consistent presentation quality in an industrial packaging environment. Installation Requirements and Site Preparation The rotary machine’s compact footprint allows for easy placement within typical bottling rooms. Connection to existing conveyor belts and utilities is recommended for optimal integration. The site layout must allow for safe operator access around the guards and clear spaces for format changeovers and routine maintenance. Certification of Conformity and Safety Standards The monoblock includes protective guards around the moving units, with standard operator guards and emergency stop functions typical of modern bottling...

Condition: new, Year of construction: 2026, NDS 2 • Aluminum profile construction • Adjustable angle/tilt • Length of inclined part: 1300 mm • Usable width: 350 mm Ljdpfxewktn Ae Anceaa • Loading length: 600 mm • Separating length: 800 mm • Minimum height (H min): 600 mm • Maximum height (H max): 1000 mm • Separator with blades included

Condition: new, Year of construction: 2026, MIXER Mod. MV2 • Steel construction, painted exterior (RAL 9006) • Capacity: 120 kg / 200 liters • Square frame: 700 x 700 mm Lajdpswktm Eefx Ancja • Adjustable height: from 1085 mm to 1385 mm (from the floor to the loading point) • Programmable control unit with emergency stop button (The customer can choose between manual mode - continuous operation - and automatic mode - with adjustable operating time and pause) • Geared motor: 0.5 HP / 0.37 kW, 220/380V, 50 Hz • Upper lifting door with hinges for loading material with safety microswitch • Lower lifting door for discharging material with safety microswitch • Side openings for connecting a suction hose • Mixer frame on adjustable telescopic legs with swivel wheels with brake

Year of construction: 2016, condition: good (used), 1.00 - GENERAL MACHINE DATA · Machine type: APC 1500 TON · Closing direction: Downstroke · Max. operating pressure (primary circuit): 220 BAR · Clamping force: 1500 TON · Weight: approx. 42,000 kg · Dimensions (W x D x H): 2500 mm x 2500 mm x 5500 mm 1.01 - HYDRAULICS & CYLINDERS · Number of clamping pistons: 1 · Clamping piston diameter: 930 mm · Clamping piston stroke: 700 mm · Number of rapid traverse/return cylinders: 2 (oil-hydraulic) · Force of rapid traverse cylinders: 20 TON (each) · Rapid traverse cylinder (bore): 120 x 50 mm · Guide columns: Steel C45, hard-chromed (0.15 mm), Ø 200 mm · Guide length: 600 mm 1.02 - DIE HANDLING TROLLEY (TRANSFER CART) · Transfer cart dimensions: 900 mm x 1900 mm · Transfer cart stroke: 1500 mm · Number of cart cylinders: 2 · Cart cylinder bore: Ø 70 x 40 mm (stroke 1400 mm) · Loading and unloading side: Front 1.03 - WORK AREA & TOOLING · Number of working levels: 2 · Number of usable spaces: 1 Lsdpfx Ajytc Shjncsaa · Clear distance between levels: 800 mm · Ejector travel area: 650 mm x 600 mm · Minimum tool height: 100 mm 1.04 - ELECTRICAL DATA & CONTROL · Control system: Programmable Logic Controller (PLC) · Motor voltage: 380 V / 50 Hz · Control voltage: 24 V DC · Installed power (main motor): 37.5 kW · Frequency converter: Yes (for low-noise operation and energy savings) · Vertical travel measurement: Linear transducer · Cart travel measurement: Encoder with absolute zero point · Pressure monitoring: Electronic pressure transmitter 1.05 - SAFETY FEATURES · Fall protection: Progressively acting mechanical safety device (effective in any position) · Safety zones: Light curtains (Category 4) at loading and unloading sides · Side guards: Fixed frames with interlocked safety doors (safety switches) · Standards: Complies with CE guidelines 1.06 - CONSTRUCTION & MATERIALS · Frame: Electrically welded steel (ribbed) · Bearing bushes: Bronze bushings · Hydraulic components: CETOP standard (e.g. ATOS) · Pneumatic components: UNI-CETOP standard

Condition: excellent (used), High-capacity screener 16, used at the Egger factory for screening sawdust and wood chips. Ledpfx Ajwccn Aonceaa

Condition: used, Year of construction: 2022, Overview This Gravity Filler for Cans was manufactured in 2022 by Italian company Emma. The machine has never been used and is immediately available. It is designed for small-scale can filling, particularly suited for 15 cl and 25 cl slim cans, with manual loading and a production speed of up to approx. 600 cans per hour. Technical data Capacity: approx. 600 cans/h Formats: 15 cl slim, 25 cl slim Dimensions: L.1480 mm x W.850 mm x H.1800 mm (max. 3000 mm) Weight: 350 kg Power: 0.8 kW Air consumption: 190 Nl/min Operating pressure: 6 bar, dry and non-lubricated air Voltage: 220 V (Single-phase) Frequency: 50 Hz Auxiliary voltage: 24 V DC Ambient temperature: 2 °C to 40 °C Laedpfjym D R Eex Ancoa

Condition: not inspected (used), Year of construction: 1998, machine/vehicle number: 13189, functionality: limited functionality, VERTICAL PANEL SAW WITH ELECTRIC MOVEMENTS & DIGITAL DISPLAYS FOR CUTS Brand: GMC MACCHINE SRL Model Type: KGS 660S Serial No.: 13189 Year: 1998 (Photos taken prior to any potential refurbishment, machine offered as-is) MACHINING CAPACITIES: - Max. horizontal cutting length: 5300 mm - Max. horizontal cutting height: 2100 mm - Max. vertical cutting height: 2200 mm - Max. cutting depth: 80 mm OTHER FEATURES: - Power supply: 380V Three-phase+T - Installed power: 7.5 kW - Main motor power: 4.4 kW (6 hp) - Saw blade speed: 5,200 rpm Pneumatic blade feed - Carbide-tipped saw blade: Ø 300 mm, bore Ø 30 mm - Welded steel frame, PVC slat frame with automatic retraction via pneumatic cylinders - Fully lengthwise pneumatic retractable intermediate support with 2 adjustable and retractable stops - Retractable rollers for panel handling - Pneumatic locking of the saw carriage - 8 bar pneumatic feed - Digital display for cuts - Complete extraction system DPS Back cover spans the entire rear of the machine Lower longitudinal channel for sawdust collection Multiple extraction points in the lower section Extraction port: Ø100 mm - Support for floor-mounted installation - CE Marked Total space required when mounted on supports: 6300 x 1600 x 3040 mm (includes operator and maintenance area) Transport dimensions, 2 packages: Ljdpfju R Ulhox Anceaa . 1 frame 6300 x 860 x h.2620 mm . 1 pallet 3150 x 1000 x 1000 mm Total weight: 1250 kg Please contact us for supply of consumables, accessories, and/or extraction systems. Offered as a lot, without refurbishment or warranty. Ex works price, excluding VAT. Transport and services on request.

Condition: excellent (used), Year of construction: 2022, BENDING LENGTH 3100mm ROLLING CAPACITY 28mm PREBENDING 22mm TOP ROLL DIAMETER 380mm BOTTOM ROLL DIAMETER 360mm SIDE ROOLS DIAMETER 270mm WORKING HEIGHT 1415mm MOTOR 15kw LENGTH 4760 mm Laodpfx Aoyrcyvjncea HEIGHT 1924mm WIDTH 2005 mm WEIGHT 17000 kgs

Condition: new, Year of construction: 2025, Automatic stacker with hydraulic lifting, ultra-high performance and super reliable, precision, safety, versatility. Lsdpfx Aov Hp Tnjncoaa

Condition: reconditioned (used), Year of construction: 2006, BACCIOTTINI Group Pit Stop AF Speed, year 2006: automatic creasing and perforating machine in excellent condition. The machine will be overhauled at Bacciottini Group srl's facilities. Robust construction and reliable performance. The machine is equipped with a NEW standard V-Shape creasing kit and a 100 cm extension. All other optional tools currently available can be added: digital creasing kit, standard perforating kit (2/1, 3/1, 4/1), or micro-perforation kit. Technical specifications: - Maximum format: 50 x 70 cm (50 x 100 cm with extension) - Minimum format: 8 x 15 cm - Paper weight: from 80 to 600 gsm - Minimum creasing distance: 0.1 mm - Programming: 200 programs with 100 creases per program - Power supply: 400 Volt three-phase 50 Hz - Power requirement: 3.5 kW This has been our best-selling model for years and continues to be appreciated worldwide for its quality and reliability. Laedeyk Utxspfx Ancja The attached photos are from our catalogue and do not specifically refer to the machine being offered.

Year of construction: 2001, condition: used, Slitter rewinder with a working width of 520 mm, maximum parent roll diameter of 1000 mm. Features 2 unwind shafts with a diameter of 70 mm, suitable for producing double-layer or single-layer rolls using a single unwinder. Equipped with 9 pneumatic knife holders, minimum slit width of 30 mm. Rewind shafts available in 25.4 mm, 50.8 mm, and 70 mm diameters. Finished roll maximum diameter 400 mm; suitable for offset paper and siliconized label paper. Maximum speed 150 m/min. Dimensions: length 3.5 m, width 1.2 m, height 1.5 m. Lsdpjyk T Izjfx Ancoaa

Condition: used, Year of construction: 2006, Overview  This Capsuling Machine was manufactured in 2006 by the Italian company NORTAN SRL. This machine was used to apply aluminum cones on 75cl glass cider bottles and includes a cone distributor, cone oven, and cone spinner. It is immediately available, as the production in the facility was stopped in 2022. Technical data  Capacity: 9,000 – 12,000 bottles per hour Formats: 75cl glass bottles (cider, champagne type) Dimensions: L 200 cm × W 150 cm × H 250 cm Application: Cone application (distributor, oven, spinner) Scope of Delivery  Cone distributor Cone oven Cone spinner Operator platforms Laedpewhkywefx Ancsa

Year of construction: 2020, condition: ready for operation (used), Max. load capacity: 2t, tilting angle: 180°, voltage: 400V, connected load: 4.25kW, compressed air connection: 6bar, CE marking: available. Tilting mechanism: chain-driven with large drive sprocket, hydraulically assisted for safe and controlled tilting process, designed for complete turning of containers (180°). Receiving container: yellow container, specially secured with retaining brackets and locks. Operation: electrically controlled with safety interlock. With documentation. An on-site inspection is possible. Laodpfx Aoxcx Amencea

Condition: used, Year of construction: 2005, functionality: fully functional, Available for sale fully functional machines are sold separately, ideal for bottling companies seeking high performance, reliability, and quality. Top-quality European machines from leading manufacturers. Reputable Brands – Manufactured by industry-leading companies. Well-Maintained – Regular maintenance. Lodpfx Anow R Tgdecsaa

Year of construction: 2018, condition: excellent (used), functionality: fully functional, Good day, We are pleased to offer you, without obligation, a used, self-propelled stretch/wrapping robot (pallet wrapper), manufacturer PKG, model Motion. Manufacturer: PKG SRL Model: Motion Year of manufacture: 2018 Maximum rotation speed: 93 m/min. Battery specification: Standard AGM/gel batteries 12V – 110Ah; both batteries were replaced at the end of last year. Charging cycle: 8-10 hours Pallet dimensions: minimum 500 x 500 mm, maximum unlimited Maximum wrapping height: 2,200 mm Minimum wrapping height: 500 mm Laodpfoyg Nyxex Ancoa Turning circle radius: 1,100 mm Electrical connection for battery charger: 230V, 50Hz Charger: High-frequency charger integrated in the machine Machine weight: approx. 400 kg Film: Type: Machine stretch film Roll diameter: max. 250 mm Roll height: 500 mm Roll weight: approx. 20 kg Note: The above technical data were taken from the operating manual, manufacturer brochures, or other sources. We cannot guarantee the accuracy or completeness of this information. Scope of delivery: 1 used stretch/wrapping robot (pallet wrapper), type Motion by PKG SRL, without film rolls. Application area and condition: The machine was used in a picking and shipping department for stretch-wrapping palletized goods. The unit is fully operational, in good condition, and can be inspected and tested under power. Both batteries were replaced at the end of last year. Remark: The machine will be available for collection from March 2026. Until then, the robot will remain in use. We would be delighted if this machine is of interest to you. Your service team, Mertens & Frowein GmbH