Used Pharmagraph Pharmagraph S1816 Particle Counter for sale (3,652)

Condition: used, This listing is for a Pharmagraph S1816 Particle Counter (1 of 8) The unit is in full working condition and is ready for immediate release. The S1816 series is a continuous-monitoring airborne particle counter designed for use in pharmaceutical cleanrooms, isolators, filling suites and similar controlled environments. It is built by Pharmagraph (UK) and intended to meet stringent regulatory/clean-room requirements (e.g., for EU GMP Annex 1 compliance). The unit houses a laser-based sensor (in particular a Met One 6015 sensor) in a stainless-steel enclosure, intended for permanent monitoring rather than portable spot checks Itsdpfjxtnquox Ah Esl

Condition: used, This listing is for 1 of 2 Handilaz Mini Particle Counter The unit is in full working condition and is ready for immediate use Key Features Simultaneous Particle Counting: Sizes and counts particles in three fixed channels (0.3 µm, 0.5 µm, 5.0 µm) High Sensitivity: Detects particles from 0.2 µm to 10 µm, with resolution down to 10 nm Flow Rate: Consistent 0.1 CFM (2.83 L/min) with quiet pump and internal flow control Power Options: Can be powered via direct supply or portable with four high-capacity, quick-change, rechargeable NiMH AA batteries Data Management: Stores up to 10,000 samples Five distinct sampling modes CSV export via USB or SD card Data output through RS-232C or RS-485 Includes data download software Display & Interface: Touchscreen with one-button operation for ease of use Build Quality & Compliance: Diode laser light source ISO 21501-4 calibrated Includes IQ/OQ (Installation/Operation Qualification) documentation Extras: Compounding procedure templates provided Applications Cleanroom Certification: ISO 14644-1 certification and re-certification ISO classification for cleanrooms Routine Monitoring: Ijdexhf Tiopfx Ah Eetl Point-of-use particle measurements Ongoing cleanroom surveillance for compliance Contamination Troubleshooting: Locating local particle sources Verifying filter performance Filter & Leak Testing: Efficient detection of filter leaks and performance validation Compounding: Suitable for pharmaceutical or sterile compounding operations using pre-designed templates

Condition: used, This listing is for a Pacific Scientific 3313LL Met One Particle Counter Itjdpexv Ab Hefx Ah Ejl The unit is in full working condition and is ready for immediate release. Operational & Practical Notes / Behavior The 3313LL counts particles by passing a laser (or light source) through the sampled air stream; when particles pass through the beam, they scatter light, which is detected by a photodetector. By having multiple size channels, the instrument can bin the counts into different particle-size ranges (for example: 0.3 µm, 0.5 µm, 1.0 µm, 3.0 µm, 5.0 µm, 10.0 µm). It likely offers programmable sampling intervals, hold times, alarm thresholds, etc. (common features in Met One/Met One‑type instruments). Data export via serial is standard, allowing integration with control or data acquisition systems. Because it’s a relatively high‑flow device (1 CFM), it can sample a substantial volume of air (improving statistical confidence in counts). The stainless steel construction helps with durability, cleanliness, and possibly resistance to corrosion or harsh environments. As a used / legacy device, calibration, maintenance, and replacement parts (filters, laser, pump, optics) may be important considerations.

Condition: good (used), Filter testing, filter test system, filter measurement system, filter test system, particle counter, dust particle counter Itjdpfxsyk Dipj Ah Eol -Particle counter: Laser Particle Count -Type: CLJ-E -Number: 2 particle counters available -Price: per piece -Dimensions: 280/205/H135 mm -Weight: 2.4 kg/pc.

Condition: used, This listing is for the Partical Measuring Systems LASAIR lll 310c particle measuring systems The unit is in full working condition and is ready for immediate release The Lasair® III 310C is a state-of-the-art portable aerosol particle counter designed to meet the stringent requirements of highly regulated environments. Manufactured by Particle Measuring Systems (PMS), it sets the standard for portable particle counters, ensuring that your environment remains clean and compliant.​ Key Features Particle Size Range: 0.3 to 25.0 µm Ijdpfoxv A T Nsx Ah Eetl Flow Rate: 1.0 CFM (28.3 LPM) ±5% Counting Efficiency: Complies with ISO 21501-4 requirements Display: 8.4" color VGA IR touch screen (IP65 rated) Data Storage: Up to 3,000 complete data sets Connectivity: Ethernet, Modbus TCP/IP, RS-232, USB data downloading; optional wireless Ethernet Environmental Inputs: Four 4-20 mA inputs for external sensors Power Options: Operates on AC power or hot-swappable batteries Compliance: Meets ISO 14644-1, EU GMP Annex 1, and ISO 21501-4 standards Software Compatibility: Supports FacilityNet, PharmaceuticalNet, and FacilityPro for data analysis and reporting Reporting Capabilities: Cleanroom certification results are available through a local printout, downloadable via USB in a secure format, or through the use of external software packages Wireless Communication: Wireless network communications are facilitated with an externally mounted wireless adapter, simplifying communications with network systems ​ Specifications Dimensions: 30.1 x 32.7 x 25.9 cm Weight: 6 kg (without battery), 7.5 kg (with two optional batteries) Operating Environment: Temperature: 0 – 30°C; Humidity: 5 – 95% RH non-condensing Sample Tubing: Supports 3/8", 1/2", and 3/4" tubing up to 8 meters in length Sample Output Filtering: Internally filtered to >99.97% at 0.3 µm

Year of construction: 2022, condition: used, Serial number: l2100128 Functions: Mixing, grinding, emulsification, vacuum deaeration, direct and indirect heating, cooling. Rotating knives + counter-rotating scraper arm, with specific tank geometry for optimal product processing Technical specifications: Production capacity: 80 to 1,020 liters/hour Capacity: 246 L Temperature: -10/127°C Adjustable rotation speed from 300 rpm to 3,000 rpm Discharge via valve or by electrically tilting the tank 90° With diaphragm circulation pump Isdpozz Iuvjfx Ah Ejtl Online auction following the closure of the Umiami Research & Development Centre in Villebon-sur-Yvette (Greater Paris, France), dedicated to the development of plant-based food products under the Swap Filet brand. The auction features more than 200 lots, including recent food preparation and processing equipment such as a STEPHAN UM 200 vacuum cooker/mixer (2022), a GOAVEC ENGINEERING mixer/cooler (2022) and a HANDTMANN VF 608 PLUS stainless steel vacuum filler (2022). The sale also includes a wide range of laboratory and process development equipment: Anton Paar particle size analyzer and rheometers, Stable Micro Systems texture analyzer, Dohmeyer cryo cabinets, Hounö and Unox ovens, Mettler Toledo metal detector, Anritsu checkweigher, Sartorius moisture analyzers, as well as numerous food preparation systems, laboratory instruments, stainless steel furniture, shelving, IT equipment and technical equipment. Sale organized by Dome Auctions France, Judicial Auction Office (OVV) No. 331-2026, conducted by auctioneer Blandine Camper. The online auction opens Tuesday 18 August and closes Wednesday 23 September. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Monday 21 September Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 29,173 h, functionality: fully functional, machine/vehicle number: 11045522744, travel distance X-axis: 500 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, controller model: HEIDENHAIN MILLPLUS, spindle speed (max.): 18,000 rpm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid commits you to collecting the item promptly between October 7, 2026, and October 14, 2026! TECHNICAL DETAILS Travel range X-axis: 500 mm Travel range Y-axis: 420 mm Travel range Z-axis: 380 mm Rapid traverse rate X-axis: 50 m/min Rapid traverse rate Y-axis: 50 m/min Rapid traverse rate Z-axis: 50 m/min Feed rate X-axis: 20 m/min Feed rate Y-axis: 20 m/min Feed rate Z-axis: 20 m/min Spindle speed: 18,000 rpm Torque: 1,100 Nm Tool holder: SK 40 Itjdozu Ixnopfx Ah Ejl Holder diameter: 40 mm Number of tool positions: 32 Max. tool length from spindle nose: 280 mm Max. tool weight with automatic tool changer: 6 kg Max. total weight of tools in magazine: 90 kg Table length: 500 mm Table width: 380 mm Max. workpiece weight: 330 kg Clamping area: 500 × 380 mm Distance between T-slots: 63 mm T-slot width: 4 H7 Centering bore diameter: 30 H6 Max. table rotation speed: 33 rpm Max. swivel torque: 1,400 Nm Swivel speed: 26 rpm Linear scale resolution X/Y/Z: 0.001 mm Positioning tolerance: 0.010 mm MACHINE DETAILS Control system: HEIDENHAIN MILLPLUS Rated apparent power: 40 kVA Input voltage: 400 V Input frequency: 50 Hz Input current: 80 A Dimensions and weight Dimensions (L x W x H): 3,500 x 2,400 x 2,500 mm Total weight: 7,000 kg Operating hours Counter 1: 80,842 h Counter 2: 29,173 h EQUIPMENT NC rotary table with swivel axis

Condition: good (used), Year of construction: 2016, Travel ranges X / Y / Z: 750 / 600 / 520 mm B-axis (swiveling): -10° / +95° C-axis (rotating): 360° Clamping surface of table: 800 × 620 mm Table load, max.: 350 kg Spindle speed: 12,000 min⁻¹ Spindle power / torque: 13 kW · 83 Nm (40 % duty cycle) Tool holder: SK 40 / BT 40 Tool magazine: 32 positions, chain type Rapid traverse rate X / Y / Z: 24 m/min Connection value: 32 kVA · 50 A Machine weight: 7,800 kg Iodpfx Aezy Uvdoh Eotl - Rotary/swivel table with B/C axes, both axes hydraulically clamped — 5-axis machining in a single setup (3+2 axes indexed, no simultaneous machining) - Heidenhain TNC 620 — the best available operator interface on the market - Chain magazine with 32 × SK 40, tool diameter up to 130 mm (300 mm with free spaces), tool weight up to 6 kg - Internal and external coolant supply - Tool measurement system in the machine - Workpiece probe from DMG MORI - Chip conveyor, coolant system with solid particle filtration - 3D quickSET kinematic measuring system in a case — this allows the swivel axes to be checked and recalibrated without a service technician - Complete original documentation: operating manual, technical manual, transport and installation instructions, spare parts catalog, electrical overall documentation The main spindle was renewed in May 2026, and the X-axis in 2025. Thus, the two most expensive wear parts of the machine are as good as new — regardless of the operating hour counter reading. Machine operating time: approx. 16,600 hours Machining time: approx. 6,900 hours Machine price without the shown accessories (extensive accessories can be purchased separately) Errors and prior sale excepted. The machine can be inspected under power with short notice.

Condition: like new (used), Year of construction: 2023, operating hours: 28 h, functionality: fully functional, machine/vehicle number: 2380029, total height: 2,600 mm, total width: 1,500 mm, total length: 3,410 mm, overall weight: 4,200 kg, rotor diameter: 330 mm, type of input current: AC, rotor length: 800 mm, power: 30 kW (40.79 HP), Function: The input material is drawn in by two slowly counter-rotating shafts (resulting in dust- and noise-free operation), onto which cutter discs are mounted. This process is monitored by an intelligent and innovative PLC control system. In the event of overload or the presence of foreign objects in the cutting unit, the control system reverses the direction of rotation. The precise cutting gap between the discs enables energy-efficient shredding of the material. The attached scraper comb prevents material from wrapping around or being pulled up into the cutters. The width of the cutters and the number of cutting edges determine the output particle size. Possible applications: Thanks to its robust construction and design for long service life, this machine can shred, economically, not only special waste, metal chips, electronic scrap, and steel drums, but also all kinds of containers filled with liquids. Iodeyw N Acspfx Ah Eetl All types of industrial waste, metal and plastic containers Production waste, file folders, paper, cardboard Electronic scrap, electric cables, metal shavings Food, kitchen waste, biogenic waste, wood Glass, plastics, various containers filled with liquids, etc.

Year of construction: 2000, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 68370, SMB Technik Multima 9R/9L/3K automatic beer bottling monobloc for rinsing, counter-pressure filling and crown capping of glass bottles. The machine was previously in operation at a Norwegian brewery. Following the sale and removal of the labelling machine, an electric motor is required to drive the bottling line. The electric motor is not included in the sale. The SMB rinsing, filling and capping monobloc was operational prior to this change and can be inspected at its current location in Norway. CONFIGURATION * 9-station bottle rinser * 9-head counter-pressure filler * 3-head crown capper * Automatic bottle transfer through rinsing, filling and capping sections * Conveyor sections * CO₂ counter-pressure / isobaric filling * Long-tube bottom-up filling * Separate bottle pressurising and return-gas system * Automatic filler bowl level and pressure control * High-pressure injection / jetter before capping * Electrically interlocked safety doors * Automatic bottle presence monitoring FILLING PROCESS The Multima is designed for bottling beer in glass bottles. Bottles are rinsed before being transferred to the filling section. Before filling, the bottles are pressurised, normally using CO₂. Beer is then filled from the bottom through long filling tubes. The system uses separate channels for bottle pressurising gas and return gas and is designed to minimise turbulence, foaming and oxygen uptake. After filling, the bottles pass a high-pressure injection device (jetter), which produces controlled foaming to help displace air from the bottle neck immediately before crown capping. TECHNICAL DATA Manufacturer: SMB Technik GmbH, Mannheim, Germany Model: Multima 9R/9L/3K Year: 2000 Serial number: 68370 Electrical supply: 400 V / 50 Hz Current: 12 A Container: Glass bottles Product: Beer Closure: Crown caps Filling principle: Counter-pressure / isobaric Rinser: 9 stations Filler: 9 filling valves Capper: 3 heads A 400 V to 230 V converter is included in the sale. DOCUMENTATION Extensive original SMB technical documentation is available, including operating instructions, setup and adjustment procedures, bottle changeover information, cleaning and sanitising procedures, maintenance and troubleshooting information, as well as filling-valve technical documentation. IMPORTANT The labelling machine has been sold separately and is NOT included. An electric motor is required to operate the bottling line and is NOT included. Isdpfx Ahsz Dhrqj Eotl Tanks and other brewery equipment visible in the photographs are not included unless specifically agreed. The machine is located in Norway and can be inspected by appointment. Dismantling, loading and transport can be discussed separately.

Condition: used, mileage: 105,161 km, power: 96 kW (130.52 HP), first registration: 01/2019, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 7, Equipment: ABS, air conditioning, central locking, crane, electronic stability program (ESP), soot filter, Errors and prior sale excepted! Internal number: 1132. 2H39824 ----EQUIPMENT - Loading crane - Air conditioning - manual with pollen filter including outside temperature display - Radio: 5" Bluetooth touchscreen Uconnect radio with CD + steering wheel multifunction buttons - Seats: Double passenger seat with folding table in the middle backrest - Transmission: 6-speed manual - ABS with EBD - Storage compartment in the roof - Airbag, driver - Exterior mirrors, adjustable - On-board computer - Rev counter - ESC including rollover prevention - ASR, hydraulic brake assist (HBA), hill start assist - Adaptive load control (LAC) - Electric windows - Central locking with remote control - Rear cross member, tail lights - Markings, rear - logo and model name - Front headrests (3), height-adjustable Isdpfsz Axdkjx Ah Eetl - Rear headrests (4), height-adjustable - Crankcase ventilation, heated - Paint: Solid color paint - Ladder rack - Steering wheel, height-adjustable - Mechanical brake assist (MBA) - Emergency brake assist and lane keeping assist - Particle filter: Diesel particulate filter - Upholstery: Fabric - Platform body - Sensor for oil level monitoring - Power steering - Seat belts, height-adjustable - Seat: Driver's seat adjustable in length, height and inclination - Seat: Passenger seat adjustable in length and inclination with center armrest and lumbar support - Daytime running lights - Immobilizer, electronic Fiat Code - Heat-insulating glazing ... and more ----The vehicle is in original condition! Nationwide delivery possible for an extra charge. Errors and prior sale excepted. We will gladly accept your vehicle as a trade-in. Financing / leasing also possible without a down payment! Do you have any further questions? We will be happy to advise you!

Condition: good (used), Year of construction: 2020, operating hours: 2,640 h, functionality: fully functional, power: 75 kW (101.97 HP), fuel type: diesel, driver cabin: day cab, gearing type: hydrostat, emission class: euro6, Equipment: air conditioning, hydraulics, soot filter, KÄRCHER MC-250 Vacuum Sweeper Technical Data: Drive type: Diesel Drive: Two-wheel drive Engine manufacturer: VM Engine power (kW): 75 Emission standard: Euro 6e Travel speed (km/h): 60 Working width with 2 side brushes (mm): 2,625 Maximum working width with 3 side brushes (mm): 2,710 Hopper capacity (l): 2,500 Fresh water tank (l): 200 Optional fresh water tank (l): 390 Permitted total weight (kg): 6,000 Dimensions (L × W × H) (mm): 4,491 x 1,300 x 1,999 Particle filter Comfort seat Heating and air conditioning Heating Hopper: 2,500 l Radio system Iodpewzwaksfx Ah Eotl Rotating warning beacon Water tank: 120, 400 l Year-round use This KÄRCHER MC250 was built in 2020, has only 2,640 total operating hours and 1,820 sweeping hours according to the counter, and is in good overall condition with typical signs of use and wear, immediately ready for operation. Comparable new price: €200,000! - Gross price: €59,900 // Net price: €50,336 - Viewing / test drive possible by arrangement - Nationwide shipping can be organized. Shipping costs depend on distance! - Attractive leasing/financing offers available through our leasing partner—contact us for details!

Condition: used, Year of construction: 2016, color: white, - Aerial work platform: France Elevateur 121FT, 1 person / max. 120 kg, working height approx. 12 m. Can be operated from the basket or via remote control. 840 operating hours. Airbag: driver's side, ABS with EBD and brake assist, ESP with traction control, outside temperature display, heat-insulating glazing, rev counter, electric front windows, three height-adjustable headrests, electrically adjustable and heated exterior mirrors, transmission: 6-speed manual gearbox, power steering, two 12 V sockets at front, 180 A alternator, mini wheel covers, wheels: 16'' steel rims, storage compartments in front doors, overhead storage shelf above windscreen, ashtray & cigarette lighter, three-point seat belts at all positions, cup holder, lockable glove compartment, height-adjustable steering wheel, pollen filter, upholstery: fabric, driver's seat height-adjustable, paintwork: solid color, self-cleaning diesel particulate filter, gear shift indicator, electronic immobilizer, central locking with remote control, passenger double bench seat, shelving for tools installed. Itedpfx Ahsyfp Hve Eel We are happy to offer you a quotation for trading in your used vehicle. If you wish to lease or finance your vehicle, we will be pleased to provide you with a tailored offer. Errors and prior sale excepted. Mr. Rudolph and Mr. Seidel will be happy to assist you by phone at: . - Central locking, power steering, ABS, ESP, particle filter, partition, rental possible Cab: short distance distribution traffic = Further information = Odometer: 191,200 km Unladen weight: 3,500 kg For further information, please contact Tobias Ebert.

Condition: used, Year of construction: 2016, color: white, - Aerial Work Platform: KLUBB K26, 1 person / max. 120 kg, working height approx. 12 m. Can be operated from basket and via remote control. 1,199 operating hours. Isdoyfrvaopfx Ah Eetl Airbag: driver side, ABS with EBD and brake assist, ESP with ASR, outside temperature display, heat-insulating glazing, rev counter, electric window lifters (front), height-adjustable headrests (3), electrically adjustable and heated exterior mirrors, transmission: 6-speed manual gearbox, power steering, two 12-volt sockets (front), 180 A alternator, mini wheel arch covers, tire repair kit, wheels: 16" steel rims, storage compartments in front doors, overhead shelf above windscreen, ashtray & cigarette lighter, three-point seatbelts on all seats, cupholders, lockable glove compartment, height-adjustable steering wheel, pollen filter, upholstery: fabric, driver's seat height-adjustable, paintwork: solid color, soot particle filter, self-cleaning, upshift indicator, electronic immobilizer, central locking with remote control, seats: front double passenger bench, built-in shelfing for tools. We are happy to make you an offer for the trade-in of your used vehicle. If you wish to lease or finance your vehicle, we can also provide a tailored offer. Errors and prior sale excepted. Mr. Rudolph and Mr. Seidel will be happy to assist you by phone at: . - Central locking, power steering, ABS, ESP, particle filter, partition wall Cab type: Local transport = Further information = Mileage: 193,000 km Unladen weight: 3,500 kg Please contact Tobias Ebert for further information.

Condition: excellent (used), Year of construction: 2020, operating hours: 837 h, functionality: fully functional, power: 75.02 kW (102.00 HP), fuel type: diesel, gearing type: hydrostat, Equipment: air conditioning, soot filter, KÄRCHER MC-250 Vacuum Sweeper Technical Data: Drive type: Diesel Drive: Two-wheel drive Engine manufacturer: VM Engine power (kW): 75 Emission standard: Euro 6e Driving speed (km/h): 60 Working width with 2 side brushes (mm): 2625 Iodpfx Ahowpkpuj Eetl Maximum working width with 3 side brushes (mm): 2710 Sweeping container (liters): 2500 Fresh water tank (liters): 200 Fresh water tank (optional) ( ): 390 Permissible total weight (kg): 6000 Dimensions (L × W × H) (mm): 4491 x 1300 x 1999 Particle filter Comfort seat Heating and air conditioning Heating Sweeping container: 2500 l Radio system Rotating warning beacon Water tank: 120, 400 l Year-round use This KÄRCHER MC250 is from the year 2020, has only 837 total operating hours and 368 sweeping hours according to the counter, and is in very good overall condition with minimal signs of use and wear, freshly serviced, ready for immediate use, comparable new price €200,000! - Gross price €129,000 // Net price €108,400 - Viewing / test drive gladly possible - Nationwide shipping can be organized, costs depend on distance! - We would be happy to provide you with an attractive leasing / financing offer through our leasing partner!

Condition: good (used), Year of construction: 2013, functionality: fully functional, The FAMAR TANDEM 400 is a powerful CNC vertical lathe with two independent machining stations. The machine is equipped with driven tools, automatic workpiece loading and unloading, a measuring probe, high-pressure coolant, and coolant filtration. The tandem design enables efficient series production and the simultaneous use of two separate machining stations. Main technical parameters: Standard chuck diameter: 400 mm Maximum chuck diameter: 400 mm Nominal turning diameter: 300 mm Maximum turning diameter: 400 mm Maximum turning length: 480 mm Maximum turning length: 300 mm Number of main spindles: 2 Max. main spindle speed: 4,000 rpm Rated power of main electric spindle: 49.6 kW Rated torque: 458 Nm S6 40% power: 61.7 kW S6 40% torque: 724 Nm Machine dimensions: approx. 3,900 × 3,500 × 3,200 mm Machine weight: approx. 21,000 kg Electrical connection: 400 V / 50 Hz Installed power: 90 kW CE compliant Tooling equipment UTTUM50 – turret for driven tools, size 50 Max. driven tool speed: 8,000 rpm Torque: 100 Nm Power: 15.6 kW UTDUM50 – turret tool disk Itjdpfsz Dq N Ejx Ah Esl Size VDI 50 12 tool positions Direct tool drive PPP40 – preparation for 2 hydraulic circuits For special workpiece clamping Piping and valves Control via M-functions Automation TRPAPE20 – 1 automatic circulating pallet conveyor for loading and unloading workpieces A single conveyor system for both workpiece infeed and outfeed Circulating pallet magazine Belt design Pallet occupancy monitoring system Pallet sorting system Working height approx. 950 mm Automatic workpiece loading and unloading via the machine TRPNVBPTE4 – Shuttle system with rotary station Loading/unloading shuttle system Integrated rotary station Including 1 set of jaws for the workpiece AZGRRB500 – set of jaws for Shuttle rotary station MPDM2 – automatic measuring probe Automatic workpiece measurement Coolant, filtration, and chip removal LBCVTT50 – belt conveyor for chips Separate conveyor for chip removal Particularly suitable for short chips, such as cast iron, brass, and some aluminum alloys LBVA760 – coolant tank Volume 760 l LBAP10 – high-pressure pump Pressure 20 bar Internal tool cooling LBFTC – paper filter for coolant Suitable for cast iron and aluminum Filtration of particles approx. 0.08 mm Flow rate max. 60 l/min LBFTTDF – double switchable filter Filtration of particles approx. 0.1 mm Bypass system allowing filter cartridge replacement AZPL – air workpiece position control Additional equipment: CNC control Siemens 840D sl 2 main spindles Driven tools C-axis 12-position turret VDI 50 1 automatic workpiece pallet conveyor Shuttle system with rotary station Automatic measuring probe Separate belt conveyor for chips High-pressure cooling 20 bar Coolant filtration Hydraulic clamping circuits Central lubrication Complete safety guarding CE The machine is particularly suitable for automated series production of rotational parts, where the two independent machining stations, driven tools, and automatic workpiece handling can be utilized.

Condition: new, Year of construction: 2025, Units available in stock! Power 18.5kW Power supply 380V 50Hz Shredding area size 600x595mm Revolutions 98RPM Length 2085mm Width 1248mm Height 1495mm Weight 1550kg VVS-600 is the smallest member of our VVS family of shredders. Single rotor shredders are some of the most universal chipping platforms out there. Best known for shredding various types of wood (Briquettes, hardwood, softwood, lumber), the platform can easily be adapted to numerous other substances such as rubbers, plastics, paper, light metals and general waste. When implemented by woodworking companies into their current lineup this machine can turn woodworking and furniture making waste into briquetteable particles which is easier to store, transport and sell. Our VVS-600 provides you with features found in much more powerful and expensive shredding units while keeping the price down to earth. A couple of them: The horizontal hydraulic ram: - Assists the rotor by pushing the material to provide maximum working area efficiency. - Is controlled by an algorithm to ensure safety and efficiency - Gimbal-mounted hydraulics provide a high lifetime - Enclosed hydraulics to reduce noise, vibrations and increase safety Itodpfxefpa Aws Ah Eol Drivetrain: - The drivetrain is protected against hits from foreign objects by using a twin-disengagement system which is easily resettable and serviceable. - Offset placement of the rotor bearings keeps them away from dust and heat buildup. Rotor: - The centrepiece of the rotor is milled from a single block of high-grade steel. - In case of severe damage to the rotor or its shafts due to a foreign object, the latter can be replaced without the need to replace the whole unit – costs saved for the user! - Blade holders are replaceable – unlike welded-in options, our rotor does not need to be replaced if the blade holders get damaged. - 4-sided rotatable blades – a single blade will last you 4 times as long. - Counter blades can be adjusted to compensate for the increased tolerances once the blades start wearing out – longer runtime with a single set of blades. Output: - Output volume and particle size is controlled by an interchangeable sieve screen which is adapted based on the material used. - The shredded material can be transported out of the machine by using different types of transporters, including air, belt and screw conveyors. Affordable pricing, proven reliability, easy maintenance, warranty, quick service and parts delivery – these are just a couple of reasons to choose our VVS series of shredders.

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, production capacity: 6,000 unit/h, The machine is operating flawlessly and has been under continuous Quadient maintenance. The latest service report from December 2025 is attached! TECHNICAL DETAILS Processing speed max.: 6,000 items/hour Document speed max.: 6,000 documents/hour Monthly volume max.: 300,000 filled envelopes/month Package thickness max.: 10 mm Package thickness for minimum clearance: less than 3 mm Minimum clearance in the depth direction with package thickness less than 3 mm: 6 mm Minimum clearance in the width direction with package thickness less than 3 mm: 16 mm Package thickness for increased clearance: 3–6 mm Minimum clearance in the depth direction with package thickness 3–6 mm: 12 mm Minimum clearance in the width direction with package thickness 3–6 mm: 19 mm Envelope hopper capacity up to C5 max.: 800 pieces Envelope hopper capacity C4 max.: 500 pieces Envelope weight up to C5 min.: 70 g/m² Envelope weight above C5 min.: 90 g/m² Envelope weight max.: 110 g/m² Refilling possible during operation Envelope width min.: 225.5 mm Envelope width max.: 330 mm Envelope depth min.: 98.5 mm Envelope depth max.: 254 mm Flap length min.: 32 mm Flap length max.: 65 mm Envelope neck depth min.: 10 mm Envelope neck depth max.: 25 mm Minimum opening in the neck area: 70 mm Flap shoulder angle: 50–90° Neck angle: 5–20° Iedpfozzqabjx Ah Estl MACHINE DETAILS Counter reading: 3,617,695 Voltage: 230 V AC Frequency: 50 Hz Fuse for envelope inserting head: 6.3 A Operating temperature: 18–28 °C Relative humidity: 30–80 % EQUIPMENT Tower feeder with 2 stations CIS reading Datamatrix reading Inserter for inserts up to A4 Enveloping module Output conveyor Conversion with C4 float switch Gluing possible with distilled water Matching base cabinet

Year of construction: 2021, condition: excellent (used), ELECTA refrigerated display case models: ELECTA 100, ELECTA 200 (corner unit), ELECTA 250 (meat) Iedezz Shgepfx Ah Eotl sections for meat, poultry, and processed meats PINK LED and CRIOLED lighting electronic controllers complete set of partition walls, cash register terminal, and corner element designed for professional product display. The display cases consist of 4 segments: 1 display case 315 cm, 2 display cases 315 cm, 3 display case 187 cm, 4 display case 80 cm (corner unit). The equipment has been in use for 5 years.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, paper weight (max.): 208 g/m², paper width (max.): 350 mm, paper height (max.): 500 mm, production capacity: 4,500 unit/h, No minimum price – guaranteed sale to the highest bidder! Auction of a brochure production line! TECHNICAL DETAILS Itodozy Hhxopfx Ah Esl Gathering towers Models: Horizon VAC-100a / VAC-100m Number of towers: 2 Stations per tower: 10 Feeder system: Air suction feeder Voltage: 230 V Frequency: 50 Hz Current draw: 10.4 A per section Booklet making and folding module Model: Horizon SPF-200A Voltage: 230 V Frequency: 50/60 Hz Current draw: 3.4 / 3.2 A Booklet making heads: 2 Brochure thickness: up to 4.5 mm Functions: Wire stitching and center folding Front trimmer Model: Horizon FC-200A Function: Automatic front trimming Operating mode: Inline operation with Horizon SPF-200A Cutting quality: High-precision cut Stacking unit Model: Horizon ST-40 Voltage: 230 V Frequency: 50 Hz Current draw: 4.7 A Function: Automatic stacking of finished brochures Production capacity: max. 4,500 brochures/h Feeder stations: 10, expandable to max. 60 Sheet format max.: approx. 350 × 500 mm Paper weight: 52–208 g/m² Booklet thickness: max. 2 mm for saddle stitching Processing: Gathering, stitching, folding, and stacking in one system MACHINE DETAILS Production counter: approx. 1,800,000 brochures EQUIPMENT Horizon VAC-100a gathering tower Horizon VAC-100m gathering tower Horizon SPF-200A booklet making and folding module Horizon FC-200A front trimmer Horizon ST-40 stacking unit Data sheets for the individual components of the system, including further detailed technical data, can be found in the appendix.

Condition: used, Year of construction: 2011, Web Width: 850 mm 1. Unwinding and Infeed System - Unwinder with constant web tension control - Web guiding and stabilization unit - Electronically controlled infeed system with precise tension regulation - Complete drive package for accurate web handling Itjdpfxsy Ey Nij Ah Eol 2. Rewinding System - Single-shaft rewinder, max. roll diameter: 1000 mm - Constant tension control for stable winding 3. Surface Treatment & Web Cleaning - Corona treatment unit for surface energy optimization (pre-print) - ACE single-sided contact roller web cleaner for dust and particle removal 4. Printing Units Flexographic Printing Section - 8 flexo printing units with: - Central impression drum - Removable ink drawer (excl. anilox rollers) - Optional flexo features: - Explosion-proof configuration (per print station) - Drum cooling system - Lightweight anilox rollers: - 5 units (195–300 lpi) with gear - 5 units (>300 lpi) with gear - 24 print sleeves with cams - 2 additional ink drawers (tray + rubber roller) - 1 trolley for ink drawers (3 slots: 2 in use + 1 reserve) Special Flexo Units - 1 cold foil trolley - 1 movable cold foil unit (can be positioned at any print station, rail-free design) Rotogravure Printing Section - 1 rotogravure station for front- or reverse-side printing, includes: - Reversing bar for reverse-side printing - Designed for PETROCOLL cold-seal coating (2.8–3.2 g/m² at 180 m/min on paper) - Rotogravure trolley for mobile positioning - Extended hot air drying system: - “Super Hood” with 32 high-efficiency blowers - Methane gas burner for heating - Integrated cooling unit - Electrostatic assist for ink transfer - 3 rotogravure print sizes (16”–26”) - Solvent ink viscometer - Pump and ink supply tank 5. Drying and UV Curing - 8 UV curing units, 22 kW each (one per print station) - Integrated cooling for UV lamps - Drum cooling for heat-sensitive substrates 6. Die-Cutting and Finishing Units - Rotary die-cutter, working width up to 530 mm - Base unit for die station - Trim removal system (up to 530 mm wide) - Matrix waste pressure system (limit: 530 mm) 7. Slitting Section - Shear (scissor) slitting system - 6 Helios box knives with self-sharpening counter blades 8. Electronic Control & Inspection - OMET electronic register control for 8-color operation - Includes “gate” function for accurate registration - Vision system for real-time print inspection - Motorized E+L Elscan camera for high-resolution web monitoring 9. Safety and Compliance - Complete CE-compliant safety guards and emergency stop systems - Designed for ergonomic operation and rapid job changeovers

Condition: used, mileage: 68,797 km, power: 96 kW (130.52 HP), first registration: 04/2019, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 7, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, crane, electronic stability program (ESP), soot filter, Errors and prior sale excepted! Internal number: 1137. 2H81211 ----EQUIPMENT - Loading crane - Air conditioning - manual with pollen filter including outside temperature display - Radio: 5" Bluetooth touchscreen Uconnect radio with CD + steering wheel multifunction buttons Ijdsz Axd Dopfx Ah Eotl - Seats: Double passenger seat with folding table in the middle backrest - Transmission: 6-speed gearbox - ABS with EBD - Storage compartment in the roof - Airbag, driver - Exterior mirrors, adjustable - On-board computer - Rev counter - ESC including rollover protection - ASR, Hydraulic Brake Assist (HBA), Hill Start Assist - Adaptive Load Control (LAC) - Power windows - Central locking with remote control - Rear crossmember, taillights - Markings, rear - logo and model name - Front headrests (3), height-adjustable - Rear headrests (4), height-adjustable - Crankcase ventilation, heated - Paint: Solid color paint - Ladder carrier - Steering wheel, height-adjustable - Mechanical Brake Assist (MBA) - Emergency brake assist and lane keeping assist - Particle filter: Diesel particulate filter - Upholstery: Fabric - Platform body - Sensor for oil level monitoring - Power steering - Seatbelts, height-adjustable - Seat: Driver's seat adjustable in length, height and inclination - Seat: Passenger seat adjustable in length and inclination with center armrest and lumbar support - Daytime running lights - Immobilizer, electronic Fiat Code - Heat-reflective glazing ... and more ----The vehicle is in original condition! Delivery throughout Germany possible for an extra charge. Errors and prior sale excepted. We will gladly accept your vehicle in part exchange. Financing / leasing also possible without a down payment! Do you have any further questions? We will be happy to advise you!

Condition: like new (used), Year of construction: 2005, total height: 3,900 mm, total width: 1,700 mm, total length: 7,600 mm, type of input current: three-phase, overall weight: 4,000 kg, For Sale: Neat and in good condition: Iodpfx Ahexztaqs Ejtl Brand: Affeldt type of conveyor: Affeldt E350 DG5 type of counter: Affeldt 275 8EV type of packaging machine: Affeldt 773 includes: conveyor belt + counting machine + vertical packaging machine Suitable for both PE and PP film. dimensions: (L x W x H) 7600 x 1700 x 3900 mm tube diameter: 180 mm weight approx. 4000 KG documentation and electrical diagrams available Year of manufacture: 2005 It has run very little and is complete. It is possible to inspect the machine at our location. If you have any questions or comments, please feel free to contact us. Kind regards, Leo Holland

Condition: used, mileage: 63 km, power: 81 kW (110.13 HP), first registration: 01/2026, fuel type: diesel, overall weight: 2,825 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Internal number: 4543.CHO24.PU66035 ---- Errors and prior sale excepted! SPECIAL EQUIPMENT - Airbag (passenger side) - Package: Technology Package 5, exterior mirrors with blinker, electrically adjustable, heated and foldable, audio system, 13-inch multifunctional display, Ford SYNC 4 incl. navigation, blind spot assist incl. CTA, rear parking brake assist, Pre-Collision Assist, camera- and radar-based, driver alertness monitor, wrong-way driver warning, lane keeping assist incl. lane departure warning and lane change assist, traffic sign recognition, park pilot front/rear, cruise control, adaptive, intelligent speed limiter, rear view camera, steering wheel, Sensico in leather look, electric safety and ESP - Radio: Ford audio system with 13-inch multifunctional display and Ford SYNC 4 incl. navigation - digital radio reception DAB/DAB+ (Digital Audio Broadcasting) - 13-inch TFT multifunctional display - integrated control panel and audio remote control on the steering wheel - Ford SYNC 4 with AppLink and touchscreen - AppLink - Amazon Alexa built-in voice assistant FURTHER EQUIPMENT - 2-stage unlocking for passenger compartment Itsdpfxjtr Srls Ah Eel - 6-speed transmission - ABS electronic with EBD - Airbag, driver side - Exterior mirrors, electrically adjustable - Exterior mirror housing, plastic, black - Battery: H7 AGM single battery - On-board computer - Roof, flat - Roof console - Double-wing rear door/180° (without window) - Rev counter - Third brake light - Electronic safety and stability - Window lifter, electric, front - Parking brake, electronic - FordPass Connect - Windshield, heated - Floor mats: rubber floor mats, front - Grab handle, driver and passenger side - Glove compartment with lockable lid - Interior lighting, front - Automatic climate control, front - Headrests (3) - Fuel tank 55 l - Load compartment lighting (LED) - Steering wheel: steering wheel, plastic - Center console, small - Emergency assist - Package: Technology Package 2 (Trend) - Ford audio system with 13-inch multifunctional display and Ford SYNC 4 - Pre-Collision Assist, camera-based - driver alertness monitor - traffic sign recognition system - wrong-way driver warning - lane keeping assist incl. lane departure warning - park pilot system front and rear - cruise control - intelligent speed limiter with speed limit display - rear view camera - Particle filter: diesel particulate filter - Radio accessories: 4 loudspeakers - Wheel covers - Tire repair kit - Tire pressure monitoring system - Wheels: steel 6.5 J x 16 m. 215/65 R16 R - Windscreen wipers with rain sensor - Headlamps with LED low beam - Sliding door: sliding door, right - Mud flaps, rear - Mud flaps, front - Power steering - Seat belts - Seats: seat package 6A - Start-stop system - Start function Ford Power - Bumper, front and rear, partially in vehicle color - Partition (metal) without window - Door handles, plastic, black-grey - Door hinges, 90 degrees - Recirculation heating - Lashing eyes 6 - Immobilizer - Heat protection glazing, slightly tinted - Central locking with remote control ... and more ---- 1st hand. German version. Errors and prior sale excepted. 2 years factory warranty from registration (extendable on request). We will gladly accept your vehicle in part exchange. Financing/leasing possible even without a down payment! Do you have any further questions? We would be happy to advise you! Although despite existing controls, a deviation of the vehicle from the above description cannot be ruled ou

Year of construction: 2011, condition: used, Tank & Environmental Protection Wozniack – Certified Specialist Company according to the Water Resources Act Dear Sir or Madam, We offer a 10,000-liter double-walled storage tank with a 70 l/min pump installed in a lockable pump cabinet. Quantity: 1 Used; fully refurbished – the tank has been cleaned, reconditioned, primed, and painted. Color: Painted in RAL color… according to your color preference. Material: Steel, grade S235JRG2. Documentation: Manufacturer’s certificate/test certificate according to DIN 6616 D/2 and nameplate. Tank for above-ground installation. Shape: Cylindrical, mounted on 2 saddle supports. Tank dimensions: Length: approx. 5,350 mm Diameter: approx. 1,600 mm Weight: approx. 2,000 kg Equipment/fittings: Dome 500 mm with dome cover, screws, and gasket. -Filling pipe 2” with TW closure (filling cap) -Suction pipe 1 ¼” -Dipstick and dipstick closure – tank level indicator -Vent stub with cap 1 ½” -Limit switch with type approval -Leak detector (optical) = LAS with leak detection fluid -Access ladder for side mounting, supplied separately Tank installation suitable for locations outside earthquake/flood zones. Diesel pump 70 l/min including particle filter, on/off switch, and tank key. All installed in a lockable pump cabinet. Simple pump with a total counter. Dispensing hose 4 m (extendable) Motor: 0.5 kW, 230 V, 4.2 A Installed with: Pipelines with ball valve, non-return valve, and tank mounting. Excellent offer! Liquid fertilizer – AHL tank systems in sizes from 10,000 to 100,000 liters. Of course, you can also customize your tank system! All our systems are thoroughly inspected and checked by selected employees in our company. We also offer cost-effective delivery upon request. Our systems can be inspected at any time. Further tank systems for above-ground and underground storage are available in all sizes and are for sale on our premises. The price for the tank system is valid ex works Warstein, loaded. Delivery can be offered at an additional cost. Delivery time: short-term. You will receive an invoice with VAT shown. In addition, we purchase existing tank systems and, as a certified specialist company according to the Water Resources Act (WHG), can professionally drain, clean, dismantle, and remove them. Isdocnik Sopfx Ah Estl Sincerely, from Warstein Tank & Environmental Protection Wozniack