Used Pbr Tm-30 - Ep 3000 Mm for sale (87,338)

Condition: used, Year of construction: 1987, spindle bore: 105 mm, Parallel Lathe PBR type TM-30 Between points: 3000 mm Maxi Ø on bench620 mm Maxi Ø over saddle: 400 mm Maxi diameter in brocken bed: 860 mm Spindle diameter: Ø 105 mm Spindle speed: from 15 to 1500 RPM 3-jaws chuck Ø 315 mm Year of construction: 1987 Motor: 15 CV Threadings: Metric + Whitworth Tailstock CM5 Scale 2 axes Equipped with: one 3-points fixed steady Dedpfx Aijz Iz N Dslscn Rapid Feed non-functional: 1 way Automatic travel X + Z is not functionnal Voltage: 380 V Dimensions (L x W x H): 4900 x 1500 x 1700 mm Weight: 4,5 T

Condition: good (used), Equipment: foot remote control, The rotary table is motor-driven and features a foot switch; the clamping range can be adjusted to suit any component. Upon request, a perforated table of any size can be supplied. 3000 kg load capacity, motor-driven braking system. One side is driven, the other side rotates passively. Dcodoz Hvl Rspfx Ailen Center height from the floor: 1000 mm, mounting plate size: 700 x 450 mm. Two sets of the same size are available.

Condition: used, Year of construction: 2004, functionality: fully functional, input voltage: 400 V, compressed air connection: 6 bar, year of last overhaul: 2026, overall weight: 3,500 kg, input frequency: 50 Hz, Equipment: documentation/manual, Hello, we are offering a Thieme 3000 SL screen printing machine that has been completely and thoroughly overhauled in our workshop. The maximum printing format of this 3/4 automatic machine is 4000 mm x 1500 mm! The machine features a large, very robust vacuum table (with two vacuum pumps) on which the printing material is positioned against stops. After the printing process, the material is picked up by a gripper and placed onto an underlying conveyor belt. The conveyor belt can be mounted on either the left or right side, depending on the local conditions. The system has the patented Thieme squeegee system with three printing cylinders and two flood cylinders. Control is via a Mitsubishi E600 display. The system was completely disassembled and reassembled in our workshop. All wear parts and maintenance parts have been replaced. The control cabinet has been powder-coated. The side panels have been replaced with robust HPL panels. All air hoses have been replaced, contactors have been reconditioned, bearing bushings have been replaced, etc. The system is assembled and located in our warehouse in 93476 Blaibach and can be viewed/tested there while powered and connected to an air supply. We can gladly handle transport and on-site assembly. If you have any questions, please do not hesitate to contact us. Dedpfx Aszyc Rijilscn

Condition: good (used), functionality: fully functional, Year of construction: 1998, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Siemens, controller model: Simatic OP7, number of rollers: 4, roller (bottom) diameter: 470 mm, roller (top) diameter: 530 mm, side roll diameter: 400 mm, roller diameter: 530 mm, roller length: 3,100 mm, working width: 3,000 mm, working height: 2,000 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 65 mm, sheet thickness stainless steel (max.): 50 mm, overall weight: 40,000 kg, total length: 6,000 mm, total width: 2,900 mm, total height: 2,900 mm, power: 55 kW (74.78 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 4, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, plate bending roll capacity 3000x50 mm Davi modelMCB3053 Hydraulic 4 roll plate bending machine, year 1998 plate width 3000 mm thickness rolling 50 mm pre-bending 40 mm width on the rolls 3100 mm upper roll size 530 mm lower roll 470 mm side rolls 400 mm Power electric 70Hp on hydraulic unit voltage 380/50 - Installed configuration Hardened surface of the 4 rolls conical bending attachment – hardened cone bending Console electric with digital position readout of the rolls Controller Siemens Simatic OP7 NC programmer for automatic rolling Hydraulic power driven the central rolls with axial gearbox Pre-pinch pressure adjustable plate edge pre-bend. Drop-end open front for unloading closed shells Rerolling system for calibration roundness of welded shells. Safety and emergency system installed. Manuals original for operation and maintenance Dcedpfsy D Ngzex Ailsn Dimension 6000x2900 x h 2900 mm weight 40000 kg

Year of construction: 1997, condition: excellent (used), PBR T35SNC x 3000 cycle turning lathe Year of manufacture: 1997 Control system: Fagor Distance between centers: 3000 mm Max. turning diameter: 630 mm Center height above the bed: 300 mm Center height above the cross slide: 165 mm Spindle bore: 105 mm Dcedpfx Aeil Hzzeilon Spindle speed: 2000 rpm Weight: 6200 kg Included accessories: Multifix set (without steel), chuck (see photos) + additional chuck. No guarantee is given for the accuracy, completeness, and up-to-dateness of the information provided.

Condition: used, Year of construction: 2021, total height: 2,810 mm, total length: 4,000 mm, total width: 2,250 mm, overall weight: 8,700 kg, CMZ TD-30-TM-800 CNC Turning-Milling Center Technical Specifications Manufacturer: CMZ Model: TD-30-TM-800 Year of Manufacture: 2021 Control System: FANUC 32i-TB Plus Maximum Turning Length: 800 mm Maximum Turning Diameter: 550 mm Spindle Power: 42 kW Bar Capacity: 82 mm Tool Turret: 16 positions Machine Weight: 8,700 kg Dodpfxsz Exmno Ailecn Equipment: Driven Tools, C-axis, Chip Conveyor Travel Y-axis: 140 - mm Weight approx.: 8,700 kg Dimensions (LxWxH) approx.: 4000 x 2250 x 2810 mm Travel Z-axis: 800 - mm Travel X-axis: 380 - mm Control: FANUC 32i-TB Plus Spindle speed: 3500 - rpm Year of construction: 2,021 Terms of payment: 100% prepayment before pick-up Terms of delivery: Free loading on truck under power: No

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Complete wood debarking line for pallet production, including a stacking machine, crosscut saw, chipper, edger, and dust extraction system. Year of manufacture: 2021 Technical data: - Max wood diameter: 480 mm - Minimum wood diameter: 120 mm - Minimum wood length: 1500 mm - Max log length: 3000 mm CAPACITY: UP TO 200 m3 PER SHIFT THE DEBARKING LINE CONSISTS OF THE FOLLOWING MACHINES: 1. BRODPOL DEBARKING LINE, which includes: - Log infeed conveyor - Longitudinal conveyor for the saw - Circular saw – 110 and 90 kW motors - Receiving roller table with a mechanism for removing edgings and side boards - Powered roller table - Base table SB 4000 - Multi-blade two-shaft saw WP 210 – 110 and 75 kW motors - Receiving table with board discharge and conveyor to the stacking machine - Lower return conveyor for edgings, side conveyor to the edger, and conveyor belt to the chipper - Sawdust screen 2. LIGNUMA OFZ 300 EDGER AND TRIMMER Year of manufacture: 2023 The machine consists of the following components: - Centering table - Trimmer MN 315 - Separating table SC-2 - Edger OFD 500/K 3. TEKNAMOTOR SKORPION 650 EB/2 CHIPPER with infeed and discharge systems. Dedov Dm T Tjpfx Ailocn 4. COMPLETE DUST EXTRACTION SYSTEM FOR ALL MACHINES.

Condition: used, Year of construction: 1983, Hydraulic Shear HACO HS 3010 Capacity: 3000 x 10 mm Dsdpsz Izmcsfx Ailecn Back gear gauge travel: 1000 mm Year of construction: 1983 Manual adjustment of the clearance between blades Cutting angle: 1° to 3° Voltage: 380 V Dimensions (L x W x H): 4000 x 2100 x 2200 mm Weight: approx 8 T

Condition: like new (used), functionality: fully functional, Year of construction: 2024, machine/vehicle number: 4ROLL 3000X 15 MM, roller (bottom) diameter: 270 mm, roller (top) diameter: 290 mm, side roll diameter: 250 mm, roller diameter: 310 mm, roller length: 3,100 mm, working width: 3,000 mm, working height: 800 mm, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness copper (max.): 25 mm, overall weight: 8,500 kg, total length: 5,100 mm, total width: 1,500 mm, total height: 1,800 mm, power: 7.35 kW (9.99 HP), number of digital displays: 2, warranty duration: 12 months, cone diameter: 400 mm, working length: 3,000 mm, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, 4 ROLL DUAL PRE-PINCH ROLLING MACHINE NEW -Width of plate 3000 mm -Thickness of plate rolling 15 mm -Thickness of plate pre-bend 12 mm Dcjdpfx Aiowfc S Teljn minimum bending diameter ID 350 mm Rolls dimensions: -Surface length mm. 3100 -Top roll mm. 290 -pinch roll mm. 270 -Power electric 10 Hp Technical data: -rolls hardened surface high resistance -variable rolling speed -Powered driven hydraulic rolls rotation -conical bending attachment roller type -calibration system re-rolling welded shells -deflection pinch pressure adjustable upon the thickness -overload protect complete safe operation of the machine. -control console on wheels with electric joysticks commands -position readout digital display for rolling memorize and repeat

Condition: used, Item No. 16191 T-slot plate Technical data: - Plate length approx. 3000 mm - Plate width approx. 2000 mm - Plate height approx. 310 mm - Thickness of the top plate approx. 70 mm - 8 T-slots in the table surface, length 3000 mm - Center distance of the T-slots in the table surface: 250 mm each - Center distance of the T-slots from the outer edge: 125 mm - T-slot width approx. 21 / 31 mm - T-slot depth approx. 30 mm Dodpfozibw Hsx Ailecn - 4 adjustable support feet - Space required: L 3000 x W 2000 x H 810 mm - Weight approx. 4200 kg

Year of construction: 2016, condition: used, Max. push length: 3000 mm Dcjdpfx Aijza Akwelon Sled can be folded up Manual movement Right-hand attachment 2 adjustable feet Plastic rollers

Condition: like new (used), functionality: fully functional, Year of construction: 2025, machine/vehicle number: M3022, control type: manual, degree of automation: manual, actuation type: hydraulic, controller manufacturer: Delsy, controller model: Digital readout, number of rollers: 4, roller (bottom) diameter: 330 mm, roller (top) diameter: 350 mm, side roll diameter: 260 mm, roller diameter: 400 mm, roller length: 3,000 mm, working width: 3,100 mm, working height: 900 mm, sheet thickness (max.): 22 mm, sheet thickness steel (max.): 22 mm, sheet thickness stainless steel (max.): 22 mm, sheet thickness aluminum (max.): 30 mm, overall weight: 13,000 kg, power: 10 kW (13.60 HP), input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 4, warranty duration: 12 months, Equipment: cone bending device, documentation/manual, hardened rollers, swiveling upper roller, Bending capacity with dual Initial pinch planetary plate width 3000 mm thickness 22 mm Dedpfx Ajid Al Neilecn pre-bend 18 mm --- Length on the rolls 3100 mm top roll 350 mm lower roll 330 mm Power electric 20Hp Vac 400/50 Installed configuration Hardened surface of the 4 rolls Driven central rolls rotation hydraulic motorized with gear units Synchronized hydraulic rotation between the rolls Rolls parallelism lifetime set with torsion bar Conical plate bend hydraulic attachment Calibration re-rolling feature for welded shells Front open drop-end to unload the closed rolled plates. Control console electric commands with digital readout Safety and emergency systems installed Manuals and schematics originals

Condition: excellent (used), Year of construction: 2018, The SEPAmatic 3000 C is a machine from the SEPAmatic brand (Modernpack Hoppe GmbH), designed to separate meat from unwanted components such as bone, skin, gristle, or bone splinters. The separator uses a belt-type separation system, well suited to processing a variety of meat and fish raw materials. Dodpfeztwuisx Ailecn How does the SEPAmatic 3000 C separator work? Raw material is drawn in between a highly elastic crushing belt and a perforated stainless steel drum, where it undergoes compression and separation. Harder components such as bone and gristle stay on the outer surface of the drum, while soft meat is pressed through the perforations, enabling continuous, precise separation of the desired raw material from unwanted parts. A simple control system, without complicated electronics or electro-hydraulics, ensures reproducible machine settings and stable operation, while quick access to the working components makes routine servicing and maintenance easier. Key advantages of the SEPAmatic 3000 C The SEPAmatic 3000 C stands out for its simple, reliable construction, in which machine settings remain stable despite wear on the working parts. Interchangeable crushing belts — available in a heavy-duty polyurethane version or a lower-cost neoprene version — allow the machine to be matched to the type of raw material processed and to operating budget. The unit on offer is fitted with a 4 mm sieve, and the set additionally includes two 3 mm sieves and two 4 mm sieves, allowing the separation grade to be easily adjusted depending on the recipe. New belts, ready for immediate replacement, are also included with the machine. Technical specifications of the SEPAmatic 3000 C Manufacturer: SEPAmatic (Modernpack Hoppe GmbH) Type: 3000 C Machine number: 197556 Power: 15 kW Power supply: 400 V, 50 Hz Rated current: 30 A Control voltage: 24 V Sieve: 4 mm mesh (set additionally includes 2 x 3 mm and 2 x 4 mm) Belts: new belts included Dimensions (L x W x H): 2650 x 2000 x 2200 mm Application of the SEPAmatic 3000 C separator The SEPAmatic 3000 C is used in meat and fish processing plants, wherever effective separation of meat from bone, skin, gristle, or bone splinters is required. The machine performs well for recovering meat from post-slaughter components for the production of fillings, sausages, and other processed products.

Condition: good (used), Bending tool, die, upper blade, upper tool, deer foot tool, deer foot tool for press brake -Tool for: Press brake Dcodpfx Aiefiqrnelsn -Dimensions: 3000/30/H116 mm -Weight: 48 kg

Condition: used, Year of construction: 2002, Hydraulic Guillotine Shear HACO TS 3006 Capacity: 3100 x 6,5 mm Back gear gauge travel: 1000 mm Year of construction: 2002 Motor power: 7,5 kW SP8 Command Blades with 4 cutting edges Voltage: 380 V Photocells at the back Length: 4000 mm Depth with photocells : 2800 mm Depth without photocells: 2200 mm Height: 1900 mm Dodpfxez Hwiqj Ailjcn Weight: approx 5 T

Year of construction: 2009, condition: good (used), Vacuum lifter, vacuum lifting device, vacuum suction cup, plate lifter -Manufacturer: Rice, -Description: Vacuum lifting device without control -Previous use: Handling of solar panels -Condition: very good, only been in use for a few months -Vacuum pump: Becker Vt 4.16 0.55 kw Dcjdpjtpyqujfx Ailen -Steering: -Suction cups: Ø 25 mm -Lifting device: travel Z= 1780 mm -Individual components: see photos -Dimensions: 3000/850/H2480 mm -Total weight: 580 kg

Condition: used, Year of construction: 1990, External/Internal Cylindrical Grinding TARDUGNO RIBON type MODULE 2A Between points: 1000 mm Centre height: 180 mm Workpiece holder spindle CM4 Maxi grinding diameter: Ø 360 mm Workpiece holder rotation: from 35 to 310 RPM Year of construction: 1990 Tilting table - 9° / + 6° Grinding wheel dimensions: Ø 406 mm x thickness 60 mm Scale on table X Spindle speed: 1500 - 1730 RPM Grindstone motor: 5,5 CV Hydraulic tailstock CM3 Auto wheel advance Internal grinding spindle: Max speed 20000 RPM Maxi boring: from 14 to 75 mm Lubricant tank+ paper filter Diamond system Tilting grindstone holder trolley Supplied with grinding wheels + steadies Voltage: 380 V Dimensions (L x W x H): 3800 x 2000 x 2200 mm Dedsz I Az Uepfx Ailecn Weight: approx 3,2 T

Condition: excellent (used), A robust machine designed for punching holes in steel, aluminum, and other metals. Thanks to its foot control, it provides convenient and safe operation. Its compact design makes it suitable for both a locksmith's workshop and a production facility. Technical specifications: Manufacturer: Mubea (Muhr und Bender) Model: KL30 Year of manufacture: 1975 Machine number: 38601 Country of manufacture: Germany (West Germany) Power supply: 3× 220/380 V Frequency: 50 Hz Motor power: 1.5 kW Rated current: 5.8 / 3.4 A Protection rating: IP44 Control: foot pedal Punching capacity: Ø 30 mm in sheet metal with a thickness of 8 mm Ø 20 mm in sheet metal with a thickness of 12 mm (Parameters correspond to the manufacturer's nameplate for a material with a strength of approximately 45 kp/mm².) Condition: Dcsdpfx Aozkmi Dsiljn Used machine. Visual condition matches the photos. Robust, heavy-duty industrial design. Ideal for locksmith workshops, steel structure production, and workshops involved in metalworking.

Condition: used, Year of construction: 2019, US-2000 AST-MDM Arch size 700x750 mm Band width 30 mm The US-2000 AST-MDM enables high cycle performance. With its dynamic high-speed band insertion and retraction by means of a brushless motor, the machine achieves up to 30 bandings/minute. Thanks to package height detection, product memory, and band centering, the band is applied to the product with precision and very gently. Shipping cartons can therefore be tightly banded without damaging the edges. The AST unit operates wear-free. Dcedpfowrp Hkex Ailon

Condition: good (used), Marble plate STIEFELMAYER Length: 3000 mm Width: 1500 mm Thickness: 350 mm Height on feet: 600 mm Number of feet: 6 feet Weight: approx 4 T It was used as a coordinate measuring marble. 2 same marble plates available. Djdpfx Aijz H Izdsljcn

Condition: used, Pair of cast iron angle plates Height: 3000 mm Dodpfxsz H I Abo Ailjcn Width: 1000 mm Depth: 1245 mm Weight: 3 T / unit

Condition: used, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 450 mm, side roll diameter: 410 mm, sheet thickness (max.): 40 mm, sheet thickness steel (max.): 40 mm, sheet thickness stainless steel (max.): 30 mm, sheet thickness aluminum (max.): 50 mm, sheet thickness brass (max.): 50 mm, sheet thickness copper (max.): 50 mm, overall weight: 23,000 kg, input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, hardened rollers, Plate bending machine 3 ROLL HYDRAULIC MODEL 3000 X 40 MM - YEAR 1997 PLATE BENDING ROLL PLANETARY DESIGN PYRAMID DUAL PRE-PINCH Nameplate Bending capacity -Plate width : 3000 mm -Rolling plate thickness: 40 mm -Prebend thickness: 30 mm --- minimum rolling ID 550 mm depending on plate thickness and width Rolls dimensions: -Useful length 3100 mm -top roll D 450 mm -side rolls D 410 mm Accessories installed: Central upper support hydraulic control to hold the plate formed into large diameters Side arm hydraulic to support the large diameter being formed Conical bending attachment with hydraulic control of the angle setting for cone rolling, cone bending stopper hardened pad swing-down on the drop-end of the machine. Technical data Djdpfx Aez H N Ifsiljcn Rolls hardening induction treatment, high strength surface of the 3 rolls Power driven total on the 3 rolls with axial gearbox and direct drive hydro-motor each roll Console electric on wheels with centralized commands joysticks and digital readout. Digital readouts of the rolls position bending and pre-bending. Re-rolling system for welded shells rounding. Opening front side hydraulic drop-end to unload the closed shell. Variable speed working roll bending rotation hydraulic speed fast/slow. Voltage supply 3 phase Vac, electric power 40 Hp.

Condition: used, Year of construction: 2007, machine/vehicle number: 001669, Lg 33121 Single-sided unwinding reel ARKU AH 3000/ST-M Year of manufacture: 1995 Maximum strip width: 600 mm Maximum load capacity: 3,000 kg Maximum coil outer diameter: 1,800 mm Spreader: hydraulically operated Presser arm: hydraulically operated Take-up reel with auxiliary drive and brake Coil loading table, fixed + reel traversing device including: Lg 33221 High-performance strip straightening machine LORENZ BRM 50/620.9 Year of manufacture: 2007 Machine no. 001669 Dcedpfx Ajhigmbeilon Maximum pass width: 620 mm Number of straightening rollers: 9 Straightening roller diameter: 50 mm Material thickness: 0.7 to 6.0 mm Straightening rollers are multiply supported to prevent deflection. Drive for all rollers via a distributor gearbox and universal joints. Used, as is, ex warehouse, immediately available. Overhaul possible upon request. Delivery time upon agreement. Further data will be available shortly or upon request.

Condition: used, Technical data for the shelf: Shelving system: SSI Schäfer Type: R 3000 The scope of delivery includes: 01x used shelf Material color: sendzimir galvanized Dcsdpfx Astuu Uroilon Dimensions: 1,282 x 300 x 30 mm f. Stand depth: 300 mm Weight per unit: approx. 3.96 kg Max. load per shelf 200 kg with evenly distributed load Currently available in stock: 1280 pcs. Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: new, Year of construction: 2023, plate width 2500 mm Dsdpfx Aoyk Imfeilecn plate depth 3000 mm plate height 300 mm weight / kg Clamping plates - T-slot plates - plate field 2500 x 3000 x 300 mm If you have not found the size you need, you can also send us an e-mail send us an e-mail with the filled PDF form. With this we can to produce an individual plate for you. Number of grooves: 10 edge distance: 66mm groove spacing: 22mm Casting quality HT250 Flatness less than 0,12 mm. Surface machined according to DIN 876/III