Used Pallmann Fine Grinders for sale (3,258)

Condition: used, machine/vehicle number: #14200, Rotor diameter: 500 mm Rotor width: 1000 mm Nsdpfx Agez Svb Ro Rewn Number of rotor blades: 96 Number of stator blades: 48 Inlet cross-section: approx. 500 x 1000 mm Drive motor: 45 kW

Condition: like new (used), functionality: fully functional, Year of construction: 2015, operating hours: 30 h, overall weight: 2,450 kg, total height: 2,400 mm, total length: 2,000 mm, total width: 1,700 mm, The machine consists of two parts a raw grinder and a fine grinder. It is used for grinding electronic mainboards, cable waste and plastic waste to 20x20 mm, while the fine grinder grinds them to 5x5 mm pieces. Nedpfszrvq Hsx Ag Rown The grinding unit is kept close by a hydraulic cylinder, opening is necessary during maintenance only. Grinding is carried out between fixed and rotary blades with adjustable gap. Motor: asynchronic.

Condition: new, machine/vehicle number: Baureihe PM / Neumaschine, The impact disc mills (fine mills) of the PM series are high-speed centrifugal mills designed for the fine grinding of nearly all thermoplastic plastics. Typical applications include the fine pulverization of regrind material or virgin material from profile, pipe, or sheet extrusion. Additionally, these mills can be used in the food, chemical, and pharmaceutical industries. The material is fed centrally through the stationary grinding disc with a dosing device. Fine grinding takes place between the rotating and stationary grinding discs. Discharge occurs via pneumatic extraction. Nedpfjyr I Hhsx Ag Rown

Condition: used, The Herbold PU 500 fine grinder is suitable for fine grinding of plastics and soft to medium-hard materials. Nedpfx Agsz Hxhuj Rown Drive power 55 kw Grinding disk diameter 500 mm Throughput capacity approx. 200-800 kg/h depending on material and fineness

Condition: new, Year of construction: 2021, protection type (IP code): IP54, type of cooling: air, Specification: Cross feeding chain conveyor; Inclined separator, reversible; Longitudinal chain conveyor, reversible incl; Njdpe Afxc Asfx Ag Rown Itsbkuow Uqqnor Ivfjn Cleaning roller conveyor; Flat belt conveyor with metal-free zone, reversible; Metal detector; Crane for contaminated material; Vibratory feeding table; Drum chipper „ORIGINAL PALLMANN“, type PHT 850 x 1250 with mechanical clamping system (3 knives-rotor); Auxiliary exhaust system; Trough belt conveyor for bark; Scraper conveyor; Double screw conveyor; Trough chain conveyor, type Z-1600/2; Electric design & automation.

Condition: excellent (used), Year of construction: 2020, Pallmann PS-H 600/900 plastic shredding line. Mill chamber dimensions 600x900mm, power 75/90kW. Very good condition. Line components: 1. Conveyor, Keiper product Drive power 1.1 kW Belt working width 600 mm Center distance 5500 mm 2. Surface metal detector, type FS 650, manufacturer Sesotec Detection width 640 mm Detection sensitivity for FE ball at detection height of 20 mm: 2.5 mm Detection sensitivity for FE nut at detection height of 100 mm: M6 3. Cutting mill, PS-H 600x900 F3/SD5, PALLMANN product 4. Volumetric feeder, type RVR 10, WAM product Drive power 0.75 kW 5. Screw conveyor, type TME219/0440, WAM product Drive power 2.2 kW 6. Sifter, type R25, Waltinger manufacturer Drive power 1.5 kW 7. Fan, type MXE063-008030-00, Reitz product Flow rate: 80 m3/min Total pressure increase 630 daPa Drive power 15 kW Rotational speed 3,000 rpm 8. Filter, type PA 7x8-2500, Tama product Residual dust content: < 20 mg/m3 Filter area 54 m2 Exhaust air 4800 m3/h 9. Filter, type PA 6x5-2000 CCD, Tama product Residual dust content: < 20 mg/m3 Filter area 23 m2 Exhaust air 2100 m3/h 10. Fan, type MXE031-003530-00, Reitz product Flow rate: 35 m3/min Total pressure increase 315 daPa Drive power 3 kW Njdpfxszxup Is Ag Rewn Rotational speed 3,000 rpm 11. Metal separator, type Rapid Vario FS 100, Sesotec product Removal duration (adjustable) 0.5-29 s Compressed air connection (hose) 6/8 mm Working pressure 5-8 bar 12. Screw conveyor, type TMS219/0540, WAM product Drive power 2.2 kW

Year of construction: 2023, condition: new, functionality: fully functional, You can view this machine at the Anuga Tec Cologne until March 22nd. Hall 8, Stand B 079, PVS. Chopping and emulsifying machine for various products, such as meat, sauces, and soups. Also suitable for pesto, ketchup, and mayonnaise. Re-work applications (baked goods and other products). Nut pastes. Pharmaceutical applications (in heparin production). Nsdpfjivikxox Ag Rswn

Condition: new, Year of construction: 2026, A superfine ball mill is a type of milling machine that is used to grind materials into very fine particles. This type of ball mill has some distinctive features that make it especially suitable for processing even the hardest materials with low contamination and minimal wear. It is commonly used in various industries, including pharmaceuticals, minerals, pigments, and chemicals, for producing micro powder or nanoparticles. Here are some key features and considerations for a superfine ball mill for micro powder: 1. High Grinding Efficiency: Superfine ball mills are designed to achieve high grinding efficiency by utilizing grinding media with a relatively small size, leading to a large surface area for grinding. Njdpfx Aeq Nf Uwog Rswn 2. Precision Control: These mills often come with advanced control systems to regulate parameters like rotation speed, temperature, and grinding time, allowing precise control over the particle size distribution. 3. Specialized Design: The mill is typically designed with features to minimize contamination, such as using materials resistant to wear and corrosion. Some mills also have cooling systems to prevent overheating during the milling process. 4. Variety of Materials: Superfine ball mills can handle a wide range of materials, including both brittle and fibrous substances. They are often used for milling hard materials that require fine grinding, such as ceramics, minerals, or pigments. 5. Size Reduction to Micro or Nano Level: The primary goal of a superfine ball mill is to reduce particle size to the micro or even nano level. This is achieved by the intense grinding action that occurs within the mill. 6. Classifier System: Some superfine ball mills incorporate a classifier system to control the particle size distribution more precisely. This allows for the separation of fine particles from coarser ones during the milling process. 7. Batch or Continuous Operation: Depending on the specific design, these mills can operate in either batch or continuous mode, offering flexibility based on the production requirements. 8. Safety Measures: Safety features may be included, such as monitoring and control systems to prevent overloading, overheating, or other potential issues during operation. When selecting a superfine ball mill for micro powder production, it's important to consider the specific requirements of your application, the characteristics of the materials you're working with, and the desired final particle size distribution. Always follow the manufacturer's guidelines for operation, maintenance, and safety to ensure optimal performance and longevity of the equipment.

Condition: excellent (used), INOTEC I225CD INDUSTRIAL EMULSIFIER-GRINDER – STAINLESS STEEL INOTEC I225CD industrial emulsifier-grinder, designed for fine grinding, homogenization, and emulsification processes of food products in high-capacity industrial lines. The equipment incorporates an upper feeding hopper and a high-performance cutting system that reduces particle size and produces homogeneous mixtures with a fine and uniform texture. INOTEC technology is especially suitable for the production of wet pet food, meat products, emulsions, and other food preparations that require intensive and continuous processing. MAIN FEATURES - Manufacturer: INOTEC - Model: I225CD - Type: Industrial emulsifier-grinder - Application: Fine grinding and emulsification - Continuous industrial operation - Upper product feeding hopper - Mechanical grinding and cutting system - Particle size reduction - Homogenization of mixtures - Production of food emulsions - Continuous feeding to the cutting chamber - Rotor and stator system according to configuration - Driven by an electric motor - Robust construction process chamber - Discharge of the processed product - Construction mainly in stainless steel - Industrial structure with access platform - Accessibility for cleaning and maintenance - Integrable into complete food processing lines OPERATING PROCESS The product is introduced into the upper hopper of the INOTEC I225CD, from where it is conveyed to the grinding chamber. Inside, the cutting system subjects the raw material to an intensive mechanical action that reduces particle size, disperses the components, and homogenizes the mixture. The degree of grinding and the final texture depend on the configuration of the cutting assembly, the characteristics of the product, and the operating conditions. Once processed, the product is discharged to the next production stages. It can be integrated with mixers, feed tanks, industrial pumps, cooking systems, heat exchangers, buffer tanks, and filling lines. APPLICATIONS Especially suitable for manufacturers of wet pet food, meat industries, and plants for the production of emulsified food products. Its applications include: - Wet food for dogs and cats - Pâtés and emulsions for pet food Nedpjz R Tb Tofx Ag Rswn - Meat preparations - Fine meat pastes - Food emulsions - Mixtures of proteins and fats - Ground and homogenized products - Other formulations compatible with industrial emulsification The INOTEC I225CD represents a high-capacity solution for fine grinding and emulsification processes, allowing the production of homogeneous products that are prepared for subsequent cooking, heat treatment, or packaging operations. The production capacity, power, and configuration of the cutting system will depend on the technical characteristics of the installed unit. Machine available for inspection. Additional technical information, production capacity, formats, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, machine/vehicle number: 14088, Rotor diameter = 800 mm Rotor width = 1500 mm Nwjdpe Admcnjfx Ag Ren Rotor blades = 9 rows Stator blades = 4 pieces Drive power = 200 kW

Year of construction: 1987, condition: ready for operation (used), Knife grinders for 800 kofama lignum strips Sharpening bar 800 used 1987 Nsdpoh S Upiofx Ag Rswn Rating: Table Model: 800 Description: 800 grinders with a slat knife

Condition: used, Year of construction: 2014, Manufacturer : MCPI Fine dosing Model: OPTI-FEEDER FD - SPA - class 2A Year : 2014 Type : Micro dosing machine / Precision dosing machine   Type of product : powder / granules, dry form Type of dosing : weight by batch in gravimetric mode Weight measurement chain : Weighing scale / Precision weigher   Hopper: 2 litres Filling of doser storage hopper: Manual Electronic weighing control and management Extractor outlet cross-section: 80 mm Dosing sequence: 3 dosing speeds (coarse, medium and fine) to optimise the precision / dosing speed ratio Dosing quality monitoring (+ and - tolerance interval) Scale measurement resolution: 10 mg (0.01 g) Minimum dose (estimate): 250 mg Maximum dose (estimate): 500 g   Memory for 800 different dosing recipes Trigger: hand sensor Results retrieved on USB key, and analysed in Excel. Control unit: Unit built to CE standards. All control and command elements are integrated into this box (controller, PLC, drive, safety devices, switches, etc.). Power supply: 220V - single-phase Doser / control box connection: direct Nedox R Df Sopfx Ag Rown   Materials in contact with the ingredient : 304L electro-polished stainless steel. Construction according to GMP rules   Manual electric screwdriver Machine dimensions: 95 x 75 x H 170 cm Documentation available

Condition: refurbished (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 66184003, type of input current: three-phase, The details pertaining to the machine are provided below. Nsdpew U A Skefx Ag Rewn 1)The quoted price pertains to the machine labeled as No. 1 in the drawings provided in the images. 2)The other units shown in the image, which are designed to operate synchronously with the machine, can also be quoted upon request. -Unit No. 2 functions as a large vibration conveyor and is the initial unit onto which the logs are loaded. -Unit No. 4 is used as a small vibration conveyor and includes a screen for separating smaller products. -Unit No. 5 is a product transfer conveyor equipped with a metal detector unit. -Unit No. 3 is a screw conveyor. It is positioned beneath Machine No. 1 and transfers the chips to the product transfer conveyor. -Unit No. 6 transports the produced chips to the designated area. Chipping Height : 380mm Chipping Width : 650mm Rotor - Diameter : 1200mm Number of Knives : 3 chipping knives and 1 counter-knife Infeed Capacity : Approx 30-40 t/h (Depends on kind of material, material mixture, type of feeding and humidity) Chipping Length : Approx. 25mm Electric Motor : 2 x 125kW Voltage : 380-400V Geared Motors : 2 x 11kW Sew Eurodrive Infeed Rollers : 9 Pcs Feeding : Horizontal Drive : By Belt

Condition: used, Year of construction: 1998, machine/vehicle number: 111419, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 380 V, input current: 8 A, input frequency: 50 Hz, type of input current: three-phase, grinding belt width: 150 mm, grinding belt length: 7,100 mm, grinding height: 580 mm, height adjustment type: electric, grinding belt speed: 150 mm/s, actuation type: electric, overall weight: 490 kg, Equipment: CE marking, documentation/manual, Samco belt grinding machine, type L/S 2500, Work table length 2500 mm, Nwjdpfx Ao Agbi Dsg Rsn Work table width 1100 mm, Overall length 4040 mm, Overall width 2210 mm.

Condition: good (used), Year of construction: 1988, functionality: fully functional, machine/vehicle number: 88-009-01, overall weight: 600 kg, Grinding machine by Jungner, model US-350, including cabinet with accessories – see images. Nwsdpfxs Afnd Ae Ag Ron

Condition: used, Safag Type 27 Special Carbide Bit Grinder Brand: Safag Model: 27 Serial number: 296 Year of manufacture: Vintage 1950s (approx.) Nodpfjh Izv Ajx Ag Rswn Dual 6" diamond grinding wheels with fine grit (700) Universal tool holder Tool holder for up to 10 mm square shank tools Coolant tank mounted on the back of the machine 3/4 HP main drive 220 volts 3-phase Complete factory closure, large selection of storage platforms, pallet racking, shelving, and paternosters. High-quality industrial machinery, lathes, grinding machines, hand tools More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 2014, Manufacturer : MCPI Fine dosing Model: OPTI-FEEDER FD - SPA - class 2A Year : 2014 Type : Micro dosing machine / Precision dosing machine   Type of product : powder / granules, dry form Type of dosing : weight by batch in gravimetric mode Weight measurement chain : Weighing scale / Precision weigher   Nodpox R Dh Hjfx Ag Rswn Filling of doser storage hopper: Manual Electronic weighing control and management Extractor outlet cross-section: 80 mm Dosing sequence: 3 dosing speeds (coarse, medium and fine) to optimise the precision / dosing speed ratio Dosing quality monitoring (+ and - tolerance interval) Scale measurement resolution: 10 mg (0.01 g) Minimum dose (estimate): 250 mg Maximum dose (estimate): 500 g   Memory for 800 different dosing recipes Trigger: foot pedal Results retrieved on USB key, and analysed in Excel. Control unit: Unit built to CE standards. All control and command elements are integrated into this box (controller, PLC, drive, safety devices, switches, etc.). Power supply: 220V - single-phase Doser / control box connection: direct   Materials in contact with the ingredient : 304L electro-polished stainless steel. Construction according to GMP rules Machine dimensions: 95 x 75 x H 170 cm Documentation available

Condition: used, Year of construction: 1991, functionality: fully functional, Equipment: rotational speed infinitely variable, Tool grinding machine Manufacturer: DECKEL, Type: S 11 Year of manufacture: 1991 Nwedo Afyq Ijpfx Ag Ren Technical details Manufacturer: DECKEL Type: S11 Year of manufacture: 1991 Clamping area: 500 x 180 mm Max. tool diameter: between centers 130 mm, with overhanging clamping 620 mm Max. tool length: between centers 270 mm Grinding stroke: 190 mm longitudinal Transverse adjustment of the tool slide: 100 mm Vertical adjustment of the grinding head: 325 mm Longitudinal adjustment of the grinding spindle: 5 mm Spindle speed: 2,000 to 10,000 rpm, continuously adjustable Drive power of the grinding motor: 1.1 kW Total power consumption: approx. 2.2 kW Connection voltage: 400 V / 50 Hz Max. grinding wheel diameter: 125 mm Workpiece spindle mounting: SK 40 T-slots: 12 mm on the machine frame Machine weight: approx. 850 kg Dimensions: L 1.60 x W 1.10 x H 1.60 m Equipment • 5-axis adjustability • Motorized height adjustment of the grinding head • Opto-electronic measuring system with 2-axis digital display • Very large range of accessories as shown in the photos • Technical documentation All information without guarantee. A demonstration under power is possible at any time in our showroom.

Condition: used, HAUSER S 50 CNC 311 is a CNC jig grinder delivering precision, high accuracy and reliable performance for demanding grinding tasks. 2‑column execution, table 1020×860 mm, X travel 900 mm, Y 600 mm, vertical slide travel 635 mm, spindle‑to‑table clearance 750 mm, passage between columns 950 mm; max grinding diameter 230 mm (360 mm with intermediate plate); taper grinding up to 16°. Key specs: Z stroke 0–170 mm stepless, stroke speed 1–12000 mm/min, stroke frequency 6 Hz, U‑axis fine feed 6 mm, planetary C motion 5–300 t/min, grinding spindle 4500–80000 rpm (air turbine up to 160000 rpm); supply 3×400 V 50 Hz, total power 9 kVA; weight ≈6300 kg; size 3000×2500×2870 mm. Fitted with retrofitted control, set of grinding arbors, grinding motors 45 S/45 ST and C‑axis; refurbished 2016. Achieves tight tolerances; suitable for automotive, watchmaking, machine tools, aerospace and medical sectors. Nwjdpfxs Afc Tls Ag Ren

Condition: like new (used), Year of construction: 2012, operating hours: 10,422 h, functionality: fully functional, spindle speed (max.): 10,000 rpm, type of input current: three-phase, overall weight: 4,250 kg, grinding spindle speed: 1,000 rpm, grinding spindle motor power: 4 W, input current: 20 A, input frequency: 50 Hz, input voltage: 380 V, space requirement width: 1,800 mm, space requirement length: 5,000 mm, space requirement height: 2,200 mm, Equipment: rotational speed infinitely variable, ANCA FastGrind 5-axis tool grinding machine with integrated loader Year of manufacture 2012, 10 kW (spindle 3.7 kW), RN34.1 control system (replacement/update in 2019) Nwodpfo Adu Tbex Ag Ron including VOMAT coolant system with backflushing and air conditioning including various collets and grinding wheels including 5 loader pallets (3, 6, 8, 10, 12 mm) This machine has performed flawlessly throughout its service life and has consistently worked reliably and precisely until the very end. The software is a pleasure to use! It is being sold only due to the closure of the business.

Condition: good (used), Year of construction: 2016, functionality: fully functional, workpiece diameter (max.): 90 mm, spindle speed (max.): 3,450 rpm, grinding spindle speed: 2,845 rpm, Equipment: emergency stop, For sale is a precision wet cut-off grinding machine from Struers in good, used condition, as can be seen in the pictures. Technical data: • Manufacturer: Struers • Model: Labotom-5 • Year of manufacture: 2016 • Disc diameter: approx. Ø 250 mm • Max. cutting diameter: approx. Ø 90 mm / 42×120 mm • Speed: approx. 2,845 rpm (50Hz) • Speed: approx. 3,450 rpm (60Hz) • Includes matching Struers Cooli-1 cooling system • The system is ideal for precise, wet abrasive cutting in the laboratory or for metallographic sample preparation. • Condition: Used, functional Shipping costs via freight forwarder: approx. €140 International buyers are welcome! You will receive an invoice with VAT shown. Inspection/collection is possible by arrangement in 42855 Remscheid. Sale from location 42855 Remscheid, free on truck. Nwjdpfe Adu Ewox Ag Ron Errors in technical data and prior sale are reserved.

Condition: new, new ! all stainless steel with 160 mm-head 40 kW Capacity: ± 2.500 kg/h grinder for fresh and frozen meat: 0°C to -8°C dimensions (l x w x h) : 3.000 x 2.000 x 2.000 mm + Loader for eurobins + Tool trolley for 160 mm grinder The automatic cross-feed meat grinder is a robust and versatile machine, designed for the efficient processing of both fresh and frozen meat down to -8 °C, as well as other food products. Thanks to its integrated angular feed system, the product is delivered evenly and in a controlled manner, resulting in consistent and high-quality grinding. The machine is constructed entirely from stainless steel, including the cutting worm, feeding worm, and worm housing, ensuring optimal hygiene, durability, and easy cleaning. Operation is controlled via an electronic control panel, allowing the user to select between two speeds for both the feeding worm and the cutting worm. Combined with various knife configurations, this enables a wide range of cuts, from coarse to ultra-fine grinding. For operator safety, the grinder is equipped with an observation platform that automatically stops the machine when opened, as well as a safety rail around the feeding area that immediately halts operation upon contact. Optionally, the grinder can be fitted with a loading system for 200-liter standard meat carts. This system is available in two versions: a column-type or a hydraulic side-loading variant, depending on the specific needs of the user. Nwedszx Uy Tjpfx Ag Rsn

Condition: good (used), Code: 0509 Brand: SOCOMEC Model: LNE 210 - CE Standard Belt sanding machine for wood, furniture, steel, aluminium, metals, plastics, etc. – CE Standard Nwjdpfxj Agb A Ij Ag Ron Work surface dimensions 2100 x 700 mm Manual table lifting by handwheel Belt width 150 mm Belt length 5950 x 150 mm Pulley diameter 200 mm Three-phase motor 4 Hp Suction inlet diameter 120 mm Overall dimensions mm 3100 x 1300 x 1700 h Weight kg 340

Condition: excellent (used), Catalog number: 8043 TECHNICAL DATA - inlet width: 450mm - inlet height: 250mm - shaft width: 530mm - shaft diameter: 450mm - blade length: 530mm - number of blades: 2 pcs - screen dimensions: 50x50mm - toothed drive shaft (bottom): 2 pcs - motor for bottom shaft: 0.75kW - toothed drive shaft (top) - motor for top shaft: 0.78kW - main motor: 45kW - conveyor belt: 0.12kW - belt dimensions: length 5150mm x width 620mm - conveyor dimensions: 5200x650x800mm - machine dimensions (length/width/height): 2620x1650x1220mm - weight: approximately 2500kg ADVANTAGES - German-made - conveyor belt: 5150mm - used shredder, good condition Nodpszu Sd Uefx Ag Rewn Net price: 65900 PLN Net price: 15326 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to higher fluctuations)

Condition: used, Year of construction: 1987, functionality: fully functional, We are offering this used Pallmann PHP 8-12 grinding plant (hammer mill), year of manufacture 1987. The precise diagrams with all individual components are available. Nedpfx Agoy Iu Rms Rewn