Used Ozon Generator Sander for sale (10,414)

Condition: used,

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: DOCAT 70, We offer this used ozone generator and abatement device Tonello ECOFREE 2, year of manufacture 2018. Machine type: DOCAT 70 Power supply: 3Ph+GND Voltage and frequency: 400V-50Hz Compressed air pressure: bar Hydraulic pressure: bar Gjdpfxsyvzzne Ankoub Maximum steam pressure: bar Weight: 300 kg Drum volume: l Serial number: 07758 Year of manufacture: 2018 Installed power: 4 kW Maximum peak current: 7 A Maximum operating current: 3 A Power cable cross section: 4 mm² If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: new, An additional aircompressor are required to enable the nitrogen generator to produce nitrogen. Gujdpfjxfrv Esx Ankob Nitrogen purity: 99.999% Input pressure: 8Bar Output pressure: 7Bar Power: 75W(Power is the cost per hour to produce nitrogen ) 3 în 1 design, no need for extra air compressor and refrigerator or dryer Gas clean Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Seller CNC Top Ten bv Coevorden, Netherlands

Condition: ready for operation (used), Boiler plant for production of steam. Godpoy Av Rdofx Ankjub Capacity : up to 12 MW Production capacity 16 ton per hour at 20 bar steam. Working pressure : From 5 bar to 20 bar Steam temp 215 degrees C Designed for solid fuel like, wood chips, sawdust, bark

Year of construction: 2025, condition: new, functionality: fully functional, Complete - New MWM and CAT GAS generator set, CHP as option, Generator 10500V/50Hz. Gsdpev Uag Ijfx Ankoub

Year of construction: 2012, operating hours: 10 h, condition: like new (used), functionality: limited functionality, The generator was involved in the development of a vertical wind turbine and, due to the termination of the project, has very few operating hours. The control cabinets were assembled in Offenburg. Gsdpfx Anoyl Nntokoub

Condition: ready for operation (used), Year of construction: 2003, Belt width: 10/12mm, belt material: PP (polypropylene), connected load: 1kW, length: 1420mm, width: 615mm, height: 1550mm. The machine has already been dismantled, an on-site inspection is possible. Guedpfx Ansuyk N Uekjb

Condition: reconditioned (used), functionality: fully functional, Manufacturer: Sander Type: Vario Master Guedpfxsttwpbs Ankjb Model: 9480 Passage height of the pallet: approx. 2200 mm Pallet passage width: max. 1300 mm Bayonet position from the floor: 500 mm Year of manufacture: 1999 Type: Vertical strapping machine Operating voltage: 400 V Power: 2 kW Control voltage: 24 V The machine is installed in our workshop and technically overhauled. We are selling a fully functional machine.

Condition: used, Year of construction: 2023, PSA Nitrogen Gas Generator NITRO Source N2 Parker N2-75 PALY VIG 1000 Liter Gusdpfsx U Tgmjx Anksb Year of manufacture: 2023 The unit looks as good as new. The system was only in operation for a short period.

Condition: used, Year of construction: 1990, MAN 125KVA diesel generator Godpfow U N Daox Anksub

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 18.03.7507, grinding width: 1,100 mm, grinding height: 150 mm, grinding belt length: 1,900 mm, grinding belt width: 1,100 mm, roller diameter: 150 mm, TECHNICAL DETAILS Maximum sanding width: 1,100 mm Maximum sanding height: 150 mm Abrasive belt length: 1,900 mm Abrasive belt width: 1,100 mm Roller diameter: 150 mm Max. working width: 1,100 mm Min. working height: 3 mm Max. working height: 152 mm Min. feed speed: 2.5 m/min Max. feed speed: 8 m/min Feed motor: 0.55 kW Feed speed regulation: Stepless Gsdpey Nx Dysfx Ankjub MACHINE DETAILS Motor: 11 kW (15 HP) Voltage: 400 V Power consumption: 28 A Fuse: 32 A Output: 15.6 kW Dimensions & Weight Dimensions (L x W x H): 1,900 x 1,800 x 2,200 mm Transport weight: 1,500 kg EQUIPMENT Sanding unit COMBI Pad sanding unit (position: top) Roller material: Rubber CE marking

Condition: new, functionality: fully functional, power: 2,028 kW (2,757.31 HP), output voltage: 11,000 V, output frequency: 50 Hz, rotational speed (max.): 1,500 rpm, motor manufacturer: MTU, 7 pcs in stock =Scope of supply= Genset mtu 16V4000L64FNER, 11 kV for operation with Natural Gas. gas train of 116-250 mbar inlet pressure with 1m flexible rubber-metal connecting hose. Gsdpfxjy Hddtj Ankoub set of sylomer stripes for genset foundation installation. set of flexible connection for engine coolant circuit with flange connection set of flexible connection for mixture coolant circuit with flange connection set of exhaust bellows with flange connection and companion flange set Maintenance-free starter batteries, mounted on base frame. MIP (MTU Interface Panel) incl. Black Start option and ECU Remote Control interface =Technical specifications= Time for delivery - in stock Engine type - mtu 16V4000L64FNER Electrical power - 2028 kW Engine speed - 1500 rpm Electrical efficiency - 43.9 % Total efficiency - 88.6 % Alternator type - Leroy Somer LSA 54.2 ZL14 Voltage - 11 kV Frequency - 50 HZ < 500mg NOx at 5% O2 =Other information= Production country - Germany

Condition: used, sanding height 150 mm 390 mm Sanding paper width 400 mm Gujdpfx Anoyz Dfaokeb engine tba KED Type XXIII II4 single wood sanding machine for sanding and calibrating solid wood individual parts and smaller workpieces. The machine is suitable for precise sanding work in carpentry and furniture making and enables uniform surface finishing. Its robust construction makes it suitable for continuous use in woodworking.

Condition: used, Working width ca. 1.300 mm mm Number of sanding units 2 st. Workpiece thickness max. ca. 150 mm Gujdeypwarepfx Anksb engine 18,5 & 15 kW Kündig ENORM 1300-2 wide belt sander for precise calibration and fine sanding of solid wood, veneer, and wood-based materials. The robust industrial design with two sanding units and cleaning brush enables high removal rates and precise surface quality in furniture and interior construction. Ideal for craft and industrial businesses with high quality standards, including sanding belts.

Condition: excellent (used), Sandingmaster 2000 - Feed rate: 4–16 m/min - 16 kW - Sanding width: 900 mm Gsdpfx Aey R U D Eonksub - Year of manufacture: 1995 - Dimensions: 1800 x 1800 x 2300 mm Due to the age of the used machine, warranty is excluded for commercial customers upon sale.

Condition: good (used), Year of construction: 1979, functionality: fully functional, Belt sanding machine type T8E, including dust bag filter system, year of manufacture 1979, table size 2800 x 950 mm, belt dimensions: 7700 x 150 mm, working length: 2700 mm, 4 kW motor, with filter hose, weight approx. 600 kg. Machine subject to differential taxation. Gujdpoxf Hyrsfx Ankjb

Condition: used, Kündig Premium-1 1100 K Quality product made in Switzerland Constant Table Machine / Automatic Head Positioning Wide Belt Calibration and Fine Sanding Machine Combination unit with grooved rubber contact roller of proven hardness Contact roller height adjustable steplessly according to grit scale Pneumatic lifting/lowering of contact roller Pneumatic sanding pad with quick-change glide plate and precision pressure regulator Spring-loaded, ground steel pressure roller at infeed Rubber-coated pressure roller at outfeed Sanding belt drive motor power: 11 kW Working width: 1100 mm Maximum workpiece pass-through height: 200 mm Feed speed: 3–15 m/min, steplessly adjustable Automatic workpiece thickness setting ENORMATIC quick adjustment with feed activation (for long workpieces) PLC control with touch screen and teach-in memory for automation and management of all working programs Infeed and outfeed tables with roller support Gusdpoy R Ruasfx Ankjb Machine is workshop-tested and in VERY GOOD CONDITION First delivered in 2016 from a training workshop / on retirement Available from stock in Lieboch

Condition: new, Catalog number: O222 ADVANTAGES – grinding length 2600mm – electric table height adjustment – new machine – warranty – CE certificate TECHNICAL DATA table size 2600x800mm table lift 570mm pulley 250mm electric table height adjustment 0.37kW belt speed 18m/sec sanding belt size 120 x 150mm belt length 7050mm engine 3kW Gusdpfx Ajy R A H Ienksb exhaust port diameter 120mm weight 400kg PRODUCT FEATURES The Optimat SD 260 long belt sander has been designed for processing smaller and medium-sized elements. The electrically controlled table certainly increases the precision and efficiency of work. Standard equipment: Electric table height adjustment Extraction nozzle User manual Automatic engine braking Protections compliant with standards Ergonomic emergency switch Electronic table stops Net price: PLN 21,000 Net price: EUR 5,000 Net price calculated according to the exchange rate of PLN 4.2/EUR (in case of larger exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 6929 Guodpfoy R A Dtox Ankjb TECHNICAL DATA - Workpiece length: 2800 mm - Workpiece width: 950 mm - Main motor: 5.5 kW - Fan motor: 2.2 kW - Sanding belt width: 160 mm - Extraction port diameter: 185 mm - Right/left rotation - Overall dimensions (L/W/H): 4080x1800x1400 mm - Weight: approx. 1000 kg ADVANTAGES – Not repainted – German manufacture – DTR technical documentation – Used sander, very good condition Net price: 8,900 PLN Net price: 2,120 EUR Net price calculated at the exchange rate of 4.2 PLN/EUR (The price may change in case of larger exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 5799 TECHNICAL DATA - Maximum workpiece width: 230 mm - Maximum workpiece height: 140 mm - Minimum workpiece length: 300 mm - 2 sanding units: - Top and bottom + platen * Top: - 2 pressure rollers, slip type, metal - Pressure mechanism - Sanding unit: 2 metal rollers + platen - Slip-type pressure roller - Feed belt * Bottom: - Feed belt - 2 metal rollers, slip type, smooth - Pressure mechanism - Sanding unit: 2 metal rollers + platen - 3rd metal roller, slip type, smooth - Electrically adjustable sanding height - Oscillation of sanding belts - Pneumatic belt cleaning - Infinitely variable feed speed adjustment via inverter: 3–15 m/min - Feed motors: 2 × 0.37 kW - Main motors: - Upper: 5.5 kW - Lower: approx. 5.5 kW - Air requirement: 6–8 bar - Extraction nozzle diameter: 4 × 100 mm - Overall dimensions (L/W/H): 2340 × 1420 × 1920 mm - Weight: 1480 kg Guedpfx Aoy R A Acsnkeb – Suitable for short workpieces (belts overlap) – German-manufactured – Very good condition – Not repainted – Used sander Net price: 22,900 PLN Net price: 5,450 EUR Net price calculated at 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: used, Year of construction: 2005, Number of belts: 2-belt Max. pass-through height: 150 mm Max. working width: 1350 mm 1st unit: combined sanding unit Design of 1st unit: steel contact roller Sanding pad 1st unit: electronic segmented shoe, 35 mm Abrasive belt length 1st unit: 1900 mm Abrasive belt width 1st unit: 1370 mm Abrasive belt speed 1st unit: 18 m/sec 2nd unit: combined sanding unit Design of 2nd unit: rubberized contact roller, 65° Shore Sanding pad 2nd unit: electronic segmented shoe, 35 mm Abrasive belt length 2nd unit: 1900 mm Abrasive belt width 2nd unit: 1370 mm Abrasive belt speed 2nd unit: variable 2 - 18 m/sec Godsytrf Repfx Ankeub Belt cleaning unit: for 2nd unit Cleaning brushes: Yes Suitable for lacquer sanding: Yes Vacuum conveyor: Yes Feed speed: infinitely variable from 2.5 to 13 m/min Control: touch-screen Elect./pneumatic belt oscillation: yes Infeed height: fixed (top section moves) Table display: digital Working height / feed table height: 900 mm Motor power: 36 kW Location: Supplier

Condition: used, Year of construction: 2002, Grinding width: 1350 mm Grinding belt width: 1370 mm Grinding belt length: 1900 mm Workpiece thickness: 3 - 150 mm Feed speed: 2.5 - 13 m/min (infinitely adjustable) Drives: Grinding unit: 15 kW Total connected load: 17 kW Weight: approx. 2400 kg Dimensions: 2000 x 1850 x 2100 mm Storage location: Nattheim Gsdpfx Aneytrfkskjub

Condition: used, Bütfering ECO 111 Electronic Wide-Belt Calibration and Fine Sanders Contact roller unit 85 SH CPS electronically controlled segmented pad Working width 1100 mm Terminal for various operating programs with selector switch and LED display Motor power approx. 11 kW Brush cleaning unit RTE additional compact roller table at infeed RTA additional compact roller table at outfeed Machine is FULLY REFURBISHED and in TOP CONDITION Available ex-stock Lieboch Guedpoy Rzf Ajfx Ankeb

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, 1 used rapid steam generator ----- Manufacturer: LOOS, Gunzenhausen Type: DF 600 Capacity: 600 kg/h Thermal output: 400 kW Gedsw I T Ivopfx Anksub Max. operating overpressure: 13 bar Water content approx.: 43 l Year of manufacture: 1996 Year of heating coil manufacture: 10 / 2023 Equipped with Weishaupt gas burner, gas control section, control cabinet mounted on the boiler body, feed water pump, and the existing coarse and fine fittings.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, 1 used steam generator ----- Manufacturer: JUMAG Model: DG560 Output: 560 kg/h Max. thermal output: 400 kW Operating overpressure: 13 bar Test pressure: 23 bar Water content approx.: 75 l CE mark: CE 0036 Year of manufacture: 2013 Equipped with Weishaupt combined gas/oil burner WGL40N/1-A Version ZM 125-550 kW, oil consumption 10.5 – 46 kg/h, gas control section, Godpfxow S Edko Anksub Control cabinet with touch control, mounted on the boiler body. Eco, automatic blowdown.